Which element would mostly likely have an electron affinity measuring closest to zero

Solid water is less dense as compared to the liquid water, that is why ice floats rather than sinks. This unusual property is because of hydrogen bonding between the molecules.

The density of ice is around 90 percent as compared to that of water, but that can vary as ice may also have air. Hence, it implies that around 10 percent of an ice cube will be above water line.

The solid form of most of the substance is denser than liquid phase and so block of most solids will sink in liquid but block of ice floats in the  liquid water because ice is less dense. On freezing, density of the water reduces by about 9%.

To know more about density of solid and liquid water, refer

https://brainly.com/question/20725746

#SPJ4

Answer:

This would be considered an average speed, as it's an estimate of how fast the cheetah can run over a certain distance, taking into account variations in its speed. It's not instantaneous, which would refer to the speed at a specific moment, and it's not constant, which would refer to the same speed being maintained over a period of time.

The primary, secondary, and tertiary hydrogens should be indicated on a diagram of the structure of 4-isopropyl-2,4,5-trimethylheptane. Hydrocarbons: Organics include hydrocarbons.

Response and Justification: 4-Isopropyl-2,4,5-Trimethylheptane is the supplied substance. Heptane, a chain with seven carbons, is its parent chain. The methyl group, CH3, is bound each of the heptane's second, fourth, and fifth carbons, as implied by the term 2,4,5-trimethyl.

The succession of atoms joined together to produce the compound's fundamental structure is known as the skeletal system of an organic complex. Chains of bound atoms, branches, and/or rings can make up the skeleton.

To know more about trimethylheptane visit:

https://brainly.com/question/9273724

#SPJ4

There can be 4 significant figures in the number given, i.e., 801.5.

In positional notation, significant figures are the digits in a number that are trustworthy and required to denote the amount of something.

Significant figures are the number of digits that add to the correctness of a value, frequently a measurement.

The first non-zero digit is where we start counting significant figures. Determine how many significant digits there are given a range of numbers.

A number's first zeros are not significant if their primary purpose is to contain the decimal point. Only when there are decimal points in the numerical quantities can trailing zeroes qualify as significant figures; otherwise, they do not.

Thus, as the position of zero is in between the digits, so it can be counted in significant number. So, it have 4 significant figures.

For more details regarding significant figures, visit:

https://brainly.com/question/29153641

#SPJ1

A) No change in E. Adding NaOH does not affect the cell voltage as it does not change the concentrations of the reactants or products.

Cell voltage is the electrical potential difference between two points in a cell. It is the amount of energy needed to move a unit charge from one point to the other. It is measured in volts (V). Cell voltage is an important parameter for battery efficiency, because it affects the amount of current that can be drawn from the battery, as well as its capacity. Cell voltage is determined by the chemical reaction taking place inside the cell, as well as the design of the cell and its components.

b) Increased E. Increasing the temperature increases the rate of the reaction, which causes the cell voltage to increase.
c) Increased E. Increasing the amount of PbCl2 increases the rate of the reaction, which causes the cell voltage to increase.
d) Decreased E. Diluting the solution by adding H2O decreases the concentrations of the reactants and products, which slows down the reaction rate and decreases the cell voltage.

To learn more about cell voltage
https://brainly.com/question/14312871
#SPJ4

The chemical secreted into the gap between neurons at a synapse is called the neurotransmitter.

Neurotransmitters - Chemicals released by neurons following an action potential. Neurotransmitters travel across synapses to excite or inhibit target neurons. Different types of neurons use different neurotransmitters and thus have different effects on their targets. There is a small gap between the axon terminal of the presynaptic neuron and the membrane of the postsynaptic cell, this gap is called the synaptic cleft. A chemical synapse uses the release of chemical neurotransmitters to pass signals from one neuron (presynaptic) to another (postsynaptic). Synapses contain small gaps that separate neurons.

Learn more about the neurons in

https://brainly.com/question/29462317

#SPJ4

The volume of air at 273 K would be 0.67 L by Gas Law. The ideal gas law, a state equation for all gases, states: PV is equal to nRT, where n is the number of moles of the gas and 8.314 joules per kelvin per mole is the universal (or perfect) gas constant.  

According to the Ideal Gas Law, all gases have an equal number of molecules when they are at the same temperature, pressure, and volume (but not the same mass)

V1=0.5 L

T1=203 K

T2 = 273 K

V2 = unknown.

Now, [tex]\frac{V1}{T1}[/tex] = [tex]\frac{V2}{T2}[/tex]

So,

0.5L/203 = V2/273

V2= 0.67 L

So, Volume of gas will be 0.67 L.

Learn more about Gas Law

brainly.com/question/13207402

#SPJ4

The the specific heat of titanium is 0.524 J g-1 °C-1.

The amount of heat required to increase the temperature of 1 gram of a substance by 1 degree Celsius (°C) is known as specific heat. Since water has a higher specific heat than other substances, it requires more energy to raise its temperature.

q = m × C × ΔT

q = m × C × (T_f - T_i),

where:

q = amount of heat energy gained or lost by substance

m = mass of sample

C = specific heat capacity (J g-1 °C-1)

T_f = final temperature

T_i = initial temperature

The specific heat capacity of water is 4.20 J g-1 °C-1

2) Therefore:

q_lost by titanium = (20.8 g) × C_titanium × (24.3 - 99.5)°C

q_lost by titanium = -1564.16 × C_titanium

q_gained by water = (75.0 g) × (4.20 J g-1 °C-1) × (24.3 - 21.7)°C

q_gained by water = 819

-q_lost by titanium = q_gained by water

-(-1564.16 × C_titanium) = 819

C_titanium = (819) / (1564.16) = 0.5236 = 0.524

C_titanium = 0.524 J g-1 °C-1

To know more about specific heat visit:

https://brainly.com/question/27991746

#SPJ4

The main reason why hydrogen bonds form between H2O molecules and not between H2S, H2Se, or H2Te molecules is because of their different chemical structures.

H2O consists of two hydrogen atoms and one oxygen atom, while H2S, H2Se, and H2Te consist of two hydrogen atoms and one sulfur, selenium, and tellurium atom, respectively.

Because oxygen has a higher electronegativity than sulfur, selenium, and tellurium, it creates a stronger bond between the hydrogen and oxygen atoms, allowing for the formation of hydrogen bonds.

These bonds are what give H2O its distinct properties, such as its ability to exist as a liquid at room temperature, its volatility, and its higher molecular weight. Additionally, these hydrogen bonds give H2O its distinct aroma, which the other compounds lack.

Learn more about hydrogen bond:

https://brainly.com/question/24317372

#SPJ4

Answer: 0.545 grams of  [tex]C_{4} H_{10}[/tex]  on burning will give 0.86 grams of water.

Explanation: The molecular mass of water is 18 grams/mole.

therefore, 0.86 grams of water = 0.86/18 (mass/molecular weight)

= 0.047 moles

Now, by unitary method :

Since by the equation, We can already tell 10 moles of water is produced by burning 2 moles of  C_{4} H_{10}.

∴ 10 moles of water →  2 moles of C2H10

1 mole of water → 2/10 moles of C2H10

0.047 Moles of water → 0.047 x (2/10) moles of C2H10

∴ We will need 0.0094 Moles of C2H10 to produce 0.86 grams of water which is 0.545 Grams (moles x Molecular mass = required weight)

Read more questions about Mole concepts,

https://brainly.com/question/22540912

Answer:

C.the sum of the kinetic energy and the potential energy of an object

Explanation:

This question can be viewed from two angles.

Mechanical energy is defined as the energy of an object in motion or the energy that is stored in objects according to their position.

Mechanical energy can also be defined algebraically as:

[tex]Energy_{Mechanical} = U + K[/tex]

Please let me know if this helped!!!

Based on the error, buffer solution will have a slightly higher capacity for the addition of acids than for addition of bases because the amount of C2H3O2− added was higher than the amount of HC2H3O2 added.

An aqueous acid or base solution that combines a weak acid with its conjugate base, or vice versa, is known as a buffer solution.

By neutralizing additional acids or bases, buffer solutions keep the pH level steady. A weak acid and its conjugate base make up these compounds, which exchange protons and hydroxide ions to create water. The pH is expressed in terms of the PKa and the ratio of the base to acid concentrations using the Henderson-Hasselbalch equation.

To know more about buffer solution, refer

https://brainly.com/question/8676275

#SPJ4

Explanation:

The balanced equation for the reaction is:

2 O + Ca → Compound

From the information given, we know that 2.0 moles of oxygen atoms reacts with 80.1 g of calcium. To find the percent composition by mass of each element in the new compound, we first need to determine the molar mass of the compound.

The molar mass of the compound can be calculated by adding up the molar masses of oxygen and calcium.

Molar mass of O = 2 x (16.00 g/mol) = 32.00 g/mol

Molar mass of Ca = 40.08 g/mol

Molar mass of Compound = 32.00 g/mol + 40.08 g/mol = 72.08 g/mol

Now we can use this information to find the percent composition by mass of each element in the compound.

% mass of O = (moles of O x molar mass of O) / molar mass of Compound x 100

% mass of O = (2.0 moles x 32.00 g/mol) / 72.08 g/mol x 100 = 44.68%

% mass of Ca = (moles of Ca x molar mass of Ca) / molar mass of Compound x 100

% mass of Ca = (80.1 g / 40.08 g/mol) / 72.08 g/mol x 100 = 55.32%

So, the percent composition by mass of oxygen in the new compound is 44.68% and the percent composition by mass of calcium in the new compound is 55.32%

Answer:

First lets write down the chemical formula

baking soda:

NaHCO₃
citric acid:

CH3COOH

Lets write the base ionization reaction for NaHCO3

NaHCO3 + H2O -> NaOH + CO2+ H2O

With this equations down, we can clearly see that baking soda produce carbon dioxide gas since H2CO3 dissolves into CO2+ H2O. The required part is HCO3-, where that does not apply to citric acid

The address "845 Rue Sherbrooke West, Montreal, Quebec, Canada" refers to a specific location, in this case, the location of a contractor named Jackson. The address contains the street name "Rue Sherbrooke West" in the city of Montreal, Quebec, Canada.

The 'H3A 0G4' postal code is a code system used to identify specific regions in Canada. Useful for mail sorting and delivery. The first three letters "H3A" represent the Forward Sorting Area (FSA), which usually corresponds to part of a city or county. The last three characters "0G4" represent the Local Delivery Unit (LDU) for a specific building, group of buildings, or single address.

The address of the contractor's office or location where the contractor operates, which may be an office building, workshop, warehouse, etc.

Learn more about the address in

https://brainly.com/question/26681442

#SPJ4

The same bottle of beer contains  1.09 x 10²⁴  hydrogen atom

The hydrogen atom in the bottle of beer can be calculate as follows:

First we should find the moles of the ethanol

We know that moles = mas / mass molar, but the question give us the density of the ethanol

We also knew that density = mass/ volume

To find the mass of ethanol we should calculate the volume first

Volume of ethanol = 5% = 0.05

Volume of ethanol = 0.05 × 356= 17.8 mL

Density of ethanol =  mass/ volume

mass of ethanol = Density x volume

mass of ethanol =  0.789 g/ mL x 17.8 mL = 13. 884 g

Molecular weight of ethanol (C 2H 5OH)=2×12+5+16+1=46 g/ mol

so 46 g C 2H5OH has 6g H

​∴13. 884 g C2H5OH = 6 x 13.884 g x 6.02 x 10 ²³= 1.09 x 10²⁴ H atom

                                                     46

Learn more about ethanol at https://brainly.com/question/12924999

#SPJ4

The partial pressure of Hi is mathematically P(HI)= 0.0135atm. Yes the reaction is in equilibrium.

The pressure exerted by an individual gas in a mixture is known as its partial pressure.

Each gas in a mixture adds to the overall pressure of the mixture. This portion represents the pressure. The pressure a gas would have if it were in its own volume and at its own temperature is known as the partial pressure.

Generally, the equation for the Reaction

H₂(g) +  I₂ (g )↔ 2HI(g)

Therefore

Kp₁ = P(HI)²/ p(H₂)×p(I₂)

Kp₁= (0.02)² / 0.958×0.877        

Kp₁= 4.8x10⁻⁴

And

Kp₂ = (0.110)²/ 0.617×0.617  

kp₂ = 0.0121 /0.380689        

Kp₂= 0.0317

Therefore, for the partial pressure of HI

4.8x10⁻⁴ = P(Hi)² / (0.617×0.617)

P(HI)= 0.0135atm

To look more abbout presure click here

brainly.com/question/25688500

#SPJ4

The solubility in water of ionic compound is measured and found to be at, In order to equal 34.0g of X, the volume of a saturated solution of X in water is 43.9 ml.

The amount of solute that dissolves in 100 ml of the solvent at a specific temperature is known as solubility.

Given: Ionic substance X dissolves in water at a rate of 0.776 g/ml

One ml of X contains 0.774 g of X.

Thus, = contains 34.0 g of X.

Therefore, 43.9 ml is the volume of a saturated solution of X in water that contains 34.0g of X.

To learn more about solubility here:

https://brainly.com/question/23946616#

#SPJ4

20ul of a 1M stock of ascorbic acid and 100mls of water is needed to make 2mm of ascorbic acid in a final volume of 100mls

To make a 2mm solution of ascorbic acid in a final volume of 100mls, we first need to calculate how many moles of ascorbic acid are required. We can use the formula:

molarity = moles of solute / liters of solution

Given that we need 2mm of ascorbic acid, we can calculate the number of moles of ascorbic acid required: 2mm = 2 x 10^-3 molar

We are told that the final volume is 100mls = 0.1Lmoles of ascorbic acid = molarity x liters of solution = 2 x 10^-3 x 0.1 = 2 x 10^-4 moles

To make a 1M stock solution, we know that 1 mole of solute is dissolved in 1 liter of solvent.

volume of 1M stock solution = moles of solute / 1 = 2 x 10^-4 moles / 1 = 2 x 10^-4 L = 20 ul.

The total volume of the final solution is 100mls = 0.1L. The volume of the 1M stock solution is 20ul = 2 x 10^-5L. So the volume of water needed for the final solution is:0.1L - 2 x 10^-5L = 0.09998 L ≈ 100mls So, you need 20ul of a 1M stock of ascorbic acid and 100mls of water to make 2mm of ascorbic acid in a final volume of 100mls.

Learn more about molarity here:

https://brainly.com/question/8732513

#SPJ4

The mass of the molecule of CO₂ is 5.04 kg

Avogadro's number represents the number of units in one mole of any substance. This has the value of 6.022 x 10²³units / mole.

It is used to make very large number easier to handle.

Firstly we will calculate the moles of CO₂

As, 6.022 x 10²³ molecules of  CO₂ is present in 1 mole of CO₂

So, 6.89 × 10²⁵  molecules of CO₂ present in  mole of  CO₂will be found as

6.89 × 10²⁵/6.022 x 10²³ = 114.4 moles of CO₂

Now we have to calculate the mass of  CO₂

mass = moles × molar mass

mass =114.4 moles× 44.01 g/mol

mass = 5.034 Kg

So it will be nearly equal to 5.04kg

To look more about molar mass click here

brainly.com/question/12127540

#SPJ4

The total number of carbon atoms in 3.50g of butane is 0.24 mol.

Liquid butane (C4H10) is a commonly used fuel in disposable lighters. Butane has a molecular weight of 58.1g/mol, which means that for every 1 mol of butane, there are 58.1 grams.

To calculate the number of carbon atoms in 3.50 grams of butane, we can use the following equation: Amount (mol) = Mass (g) / Molecular Weight (g/mol).

In this case, 3.50g / 58.1g/mol = 0.060 mol of butane. Since each molecule of butane contains 4 carbon atoms, the total number of carbon atoms in 3.50g of butane is 0.060 x 4 = 0.24 mol of carbon atoms.

To learn more about butane, click here:

https://brainly.com/question/14818671

#SPJ4

Chemists use the phrase, "like dissolves like" to describe how varying polarity causes molecules to interact with one another. Both polar and non-polar chemicals will dissolve in other polar and non-polar substances, respectively. Although compounds can have varying degrees of polarity, they are rarely completely polar or non-polar. Different molecules attract each other using different forces, which affects how well they dissolve in various solvents. It is feasible to separate mixtures into their individual components due to variations in solubility.

It is feasible to separate mixtures into their individual components due to variations in solubility. On the other hand, two phases will emerge if the solvent molecules have a significant attraction to one another but minimal affinity for the solute molecules. The well-known fact that oil and water do not mix, or if they do, do not mix for very long, is a typical illustration of the second scenario mentioned in the preceding sentence. Alkanes and other nonpolar molecules make up oil, but polar water molecules may create strong hydrogen bonds with one another.

To learn more about Solubility, click here: -

https://brainly.com/question/28170449

#SPJ4

The force in members HI will be in tension, CD will be zero force member, CH will be in compression GF will be in tension and EF will be in compression.

In mechanics, a force is any action that has the potential to change, maintain, or distort a body's motion.

Applying equilibrium equations,

∑v = 0

[tex]V_{A}[/tex] + [tex]V_{K}[/tex] = 1500 + 1500 + 1500+ 1500+ 1500

[tex]V_{A}[/tex] + [tex]V_{K}[/tex] = 7500lb

∑m = 0 taking the moment about joint K

[tex]H_{A}[/tex] × 4 = 1500×3 + 1500×6 + 1500×9 + 1500×12 + 1500×15

4[tex]H_{A}[/tex] =  4500lb + 9000lb + 13500lb + 18000lb+ 22500lb

4[tex]H_{A}[/tex] = 67500lb

[tex]H_{A}[/tex] = 67500/4

∑H = 0

[tex]H_{A}[/tex] +[tex]H_{K}[/tex] = 0

[tex]H_{K}[/tex] = -67500/4 = -16876lb

Taking the moment of joint F

[tex]V_{A}[/tex] ×15 + [tex]V_{K}[/tex]×15 + [tex]H_{K}[/tex]×15

-1500×12 -1500×9 -1500×6-1500×3 = 0

15 ([tex]V_{A}[/tex]+[tex]V_{K}[/tex]) + 4 [tex]H_{K}[/tex] = 1500×30

15 ([tex]V_{A}[/tex]+[tex]V_{K}[/tex]) + 4(-16876) = 1500×30

([tex]V_{A}[/tex]+[tex]V_{K}[/tex]) = 7500lb

∑v = 0

[tex]F_{CH}[/tex] Sinθ  + 7500 = 0

[tex]F_{CH}[/tex] = -9375lb

[tex]F_{CD}[/tex] + [tex]F_{HI}[/tex] + [tex]F_{CH}[/tex] ×3/5 = 0

[tex]F_{CD}[/tex] + [tex]F_{HI}[/tex] - 9375×3/5 = 0

[tex]F_{CD}[/tex] + [tex]F_{HI}[/tex] = 5625lb

Taking the moment of joint A,

-16875×4 + [tex]F_{HI}[/tex]×4 - [tex]F_{CH}[/tex] Sinθ  + 6H = 0

([tex]F_{HI}[/tex] - 16875) ×4 = -9375 ×6×4/5

[tex]F_{HI}[/tex] = 5625lb

[tex]F_{CD}[/tex] = 0lb

member HI will be in tension

CD will be zero force member

CH will be in compression

[tex]F_{GF}[/tex] Sinθ = 1500

[tex]F_{GF}[/tex] = 1500/Sinθ = 1500/4×5

[tex]F_{GF}[/tex] = 1875lb

[tex]F_{EF}[/tex] + [tex]F_{GF}[/tex] Cosθ = 0

[tex]F_{EF}[/tex] = -  [tex]F_{GF}[/tex] Cosθ

[tex]F_{EF}[/tex] = - 1875×3/5

[tex]F_{EF}[/tex] = - 1125lb

GF will be in tension and EF will be in compression.

To know more about force visit:

https://brainly.com/question/13191643

#SPJ4

Complete question is attached below.

The Freezing point = 243 K, and Boiling point = 108.250C if antifreeze solution that is 50.0% by mass of ethylene glycol (hoch2ch2oh) in water.

petroleum hydrocarbons Over 95% of the worldwide annual commercial production of ethylene is currently based on steam cracking of petroleum hydrocarbons. Various feedstocks, including ethane, propane, butanes, naphthas and gas oils, are used to produce ethylene.

Natural sources of ethylene include both natural gas and petroleum; it is also a naturally occurring hormone in plants, in which it inhibits growth and promotes leaf fall, and in fruits, in which it promotes ripening. Ethylene is an important industrial organic chemical.

To know more about ethylene visit

https://brainly.com/question/19358822

#SPJ4

Answers:

Explanation:

The mole ratio 2/3 describes 15 moles of oxygen is required to produce 10 moles of product.

In a balanced chemical reaction, the ratio of any two compounds' mole amounts—measured in moles—is known as the mole ratio. In the balance chemical equation, the ratios of the molecules required to complete the reaction are compared.

Given chemical reaction,

4Al + 3O₂ → 2Al₂O₃

As per the equation 2 moles of aluminum oxide produces 4moles of aluminum and 3 moles of Oxygen.

The ratio of Al to oxygen = 2moles/3moles = 2/3

no moles of oxygen × 2/3  = 10 moles of Al₂O₃

no moles of oxygen = 10 × 3/2

no moles of oxygen = 30/2

no moles of oxygen = 15.

To know more about mole ratio visit:

https://brainly.com/question/15288923

#SPJ4

C=C double bond adjacent to a carbocation is structural feature must a compound possess in order to be classified as an allylic carbocation.

The double bond carbon atoms can be classified as vinylic and allylic carbon atoms. The general formula for a vinyl group is R-CH = CH 2 where both carbon atoms are bonded with a double bond and the R is attached in the vinylic position.

Because the two carbon atoms form a double covalent bond, they are sp 2 hybridized. The allylic position is also like the vinylic position. The allylic carbon is bonded to a carbon atom that is double bonded to another carbon atom.

The allylic carbon atom is an sp 3 hybridized carbon atom in the RCH 2 -CH=CH 2 allylic group bonded to the -CH=CH 2 group.

For example in propene, the highlighted carbon atom is an allylic carbon atom (CH 3 -CH=CH 2 ). Similarly, in cyclohexene, the carbon atom next to the double bond is an allylic carbon atom.

Learn more about allylic carbocation at https://brainly.com/question/28250336.

#SPJ4

Answer:

13.00 [tex]dm^{3}[/tex]

Explanation:

At S.T.P one mole of any gas requires 22.414 [tex]dm^{3}[/tex].

By setting up mole ratio between moles and volume;

         moles    :     volume

             1         :      22.414

            0.58    :         X

 X = 0.58 x 22.414

 X = 13.00 [tex]dm^{3}[/tex]

The grams of ethane present in the sample is approximately,

m = 3.2051 unit.

The number of atoms, molecules, and ions that make up a material is measured in moles. Any atom has 6.022 x 1023 molecules in a mole. We use the mole to quantitatively determine the size of the tiniest entities, much as we use a standard value to compute various things, such as 1 dozen Equals 12 items.

So now,
Number of moles = mass of substance / Molar mass of the substance.
n=m/M
0.1066 = m / 30.067
Multiply both sides by 30.067.

0.1066 x 30.067 = ( m / 30.067 ) x 30.067.

m = 3.2051 unit.

To learn more about molar mass, click here: -https://brainly.com/question/20552052

#SPJ4

The equilibrium constant for the reaction is 8.5* 10^15.

Chemical equilibrium is characterized as an active condition in which the concentration of each reactant remains constant. While they might not be equal, they are not altering. A double arrow in a chemical process denotes an equilibrium state. Products are on the right while reactants are to the left.

The Latin term libra, which meaning weight or balance, is the origin of the word equilibrium. Several instances of equilibrium include: a book that is open and at rest. a vehicle that is going steadily. a chemical process where both the forward and backward rates of reaction are equal.

To know more about equilibrium visit-

https://brainly.com/question/29627805

#SPJ4