Although I am in the middle of the 5 stages, I am just as important
as the first and the last. As soon as you see a leaf sprout, you are
sure to be in my stage. Who am I?
This is annoying
Answer: The final stage of the life cycle of a tree is when it has fully grown and reached the ... You should be confident in your supplier's approach to sustainability. ... This is the first occasion you will see a stem and perhaps a couple of leaves. ... The next phase is the sapling stage, this is when the sprout continues to grow and has ...
Explanation:
explain isotope with hydrgen diagram
Answer:
Hydrogen has three naturally occurringisotopes: 1H (protium), 2H (deuterium), and 3H (tritium). Other highly unstable nuclei (4H to 7H) have been synthesized in the laboratory, but do not occur in nature. The most stable radioisotope ofhydrogen is tritium, with a half-life of 12.32 years.
3. Why have we not been able to create a fusion reactor on Earth?
Answer:
We are not able to create a fusion reactor on Earth because fusion energy production is not based on a chain reaction, as is fission. Plasma must be kept at very high temperatures with the support of external heating systems and confined by an external magnetic field.
Explanation:
 Can anybody help it 8th grade science about the sun
Answer:
The sun is at the (edge) of our solar system
and is much (hotter) than anything else in the solar system (95%) of the entire mass of the solar system is contain in the sun
Name the type of chemical reaction.
NaBr + H3PO4 → Na3PO4 + HBr
Answer:
double displacement (metathesis) hope that helps!(^_^メ)
Explanation:
meh.
Explain why chlorine (Cl2) is a gas at room temperature,
but sodium chloride (NaCl) is a solid at room
temperature.
Include description of the bonding and structure of chloride and sodium chloride in your answer
Answer:
The melting/boiling point of a substance determines what state of matter it takes at a certain temperature.
In Cl2 there are covalent bonds between the atoms forming simple molecules. There are weak attractions between molecules of Cl2 meaning little energy is needed to break these forces of attraction and therefore Cl2 has a low boiling point.
NaCl on the other hand has strong electrostatic forces of attraction between the positvely charged Na ion and the negatively charged Cl ion. NaCl forms a giant ionic lattice that requires high amounts of energy to break and therefore has a high melting point.
What is the total amount of heat energy, in
joules, absorbed by 25.0 grams of water when the
temperature of the water increases from 24.0°C to
36.0°C?
Answer:
0.84
Explanation:
total heat energy =mass ×specific heat capacity (4.2kJ)×temp change
mass=25g convert to kg to get 0.025
specific heat capacity is 4.2
temp change=36.0-24.0=8.0
q = mC∆T
m=25.0
c=24.0
ΔT=36.0
25.0 * 24.0 * 36.0 = 21,600 jules
The equation q = MC ∆ T, where m is the sample mass, c is the specific heat, and ΔT is the temperature change, can be used to determine the amount of heat acquired or lost by a sample (q).
How can you figure out how much energy was consumed?
This is simple to perform; to calculate the amount of heat absorbed, multiply the substance's heat capacity by its mass and the temperature change.
The specific heat capacity of a substance is the amount of energy needed to raise the temperature of 1 gram of that substance by 1 degree Celsius. With a value of 4.18 J/g/°C, water has one of the highest heat capacities.
To learn more about q = MC ∆ T refer to:
https://brainly.com/question/1658182
#SPJ2
What is the mole ratio of water (H20) to phosphoric acid (H3PO4)?
P.010 + H2O 4H3PO4
Before
After
Р
4
(4) - 4
4(4) - 16
O 10+1
H
2
3(4) - 12
1:1
46
6:4
2:2
Answer:
the answer to this problem is before
Explanation:
I'm not sure how to do this
A sample of nitrogen gas contains 8.23 x 10^23 molecules. What is the volume of this sample at STP?
Please show and explain the steps.
Answer:
30.6 L
Explanation:
Given data:
Number of molecules of nitrogen = 8.23×10²³ molecules
Volume occupy at STP = ?
Solution:
Standard temperature = 273.15 K
Standard pressure = 1 atm
One mole of any substance at STP occupy 22.4 L volume.
Number of moles of nitrogen:
1 mole contain 6.022×10²³ molecules.
8.23×10²³ molecules × 1mol / 6.022×10²³ molecules
1.37 mol
Volume of nitrogen:
1.37 mol × 22.4 L / 1 mol
30.6 L
pls don't answer if you done know. Which of the following best describes what would happen if mitosis did not take place?
A.Cells would get smaller and smaller over time.
B.Body tissues would not be able to repair themselves
C.The production of gametes (reproductive cells) would not occur
D.Organisms would all be multicellular.
pls help i really need this answer
Answer: B
Explanation:
WILL GIVE BRAINLIEST!!
A magnetic globe is being held down on a base. When released, the globe rises above the base and eventually comes to rest floating above the base.
In which position shown does the globe have the greatest magnetic potential energy?
Answer:
It is position 3
Explanation:
Because the further the magnets are the higher the potential energy, and in position 3 the globe is the furthest from the base meaning that in base 3 the magnetic potential energy is the highest or greatest there.
I need help...................
Do the reactants or products contain more energy in the
decomposition reaction of sodium azide?
Answer:
reactants contain more energy in the decomposition reaction of sodium azide?
Explanation:
PLEASE ASAP
Determine the mass, in grams, for 1.20e24 molecules of H₂
Answer:
3.98g
Explanation:
Given parameters:
Number of molecules = 1.2 x 10²⁴ molecules
Unknown:
Mass of H₂ = ?
Solution:
To find the mass of this molecule, we use the expression below:
Mass = number of moles x molar mass
Molar mass of H₂ = 2(1) = 2g/mol
6.02 x 10²³ molecules are contained in 1 mole of a substance
So; 1.2 x 10²⁴ molecules will have [tex]\frac{1.2 x 10^{24} }{6.02 x 10^{23} }[/tex] = 1.99 moles of H₂
Mass of H₂ = 1.99 x 2 = 3.98g
_____of gas molecules with an object is the cause of
pressure by a gas.
Answer:
Gas Pressure
Explanation:
Gas pressure is caused by the force exerted by gas molecules colliding with the surfaces of objects (Figure 5.2. 1). Although the force of each collision is very small, any surface of appreciable area experiences a large number of collisions in a short time, which can result in a high pressure.
Answer:
Collisions
Explanation:
It says that it was the answer.
please answer this for me shehsh
Answer:
ih2706
Explanation:
Which describes an example of ecological succession?
Answer:
b. a meadow replacing a pond in it's flood plain
Explanation:
I'ts a secondary succession.
why sometimes the electrons of an atom transfer to higher energy level
Answer:
According to Bohr, the amount of energy needed to move an electron from one zone to another is a fixed, finite amount. ... The electron with its extra packet of energy becomes excited, and promptly moves out of its lower energy level and takes up a position in a higher energy level. This situation is unstable, however.
How many Joules of heat are required to melt 250 grams of ice at 0°C?
AHfus = 334 J/g
AHvap = 2258 J/g
Cp= 4.184 J/g C
Heat required : Q = 83500 J = 83.5 kJ
Further explanationGiven
mass ice = 250 g at 0°C
Required
The heat required
Solution
The heat to change the phase can be formulated :
Q = m.Lf (melting/freezing)
Lf=latent heat of fusion
Input the value :
Q = 250 g x 334 J/g
Q = 83500 J
_____ is responsible for bringing gravity into modern science.
Isaac Newton
Galileo Galilei
Albert Einstein
Which of the following best describes the movement of particles in a solid?
O A. Particles can vibrate slightly, but are unable to move around.
O B. Particles move past each other freely.
O C. Particles travel at high speeds in all directions.
O D. Particles travel at low speeds in all directions.
Answer:
A
Explanation:
particles are frozen and hence will vibrate in their fixed positions
7. Although carbon's three isotopes are carbon-12, carbon-13, and carbon-14, its
average atomic mass is 12.01 because
A. carbon-12 is the heaviest isotope.
B. carbon-12 is most useful to humans.
C. carbon-12 is the most common isotope.
Answer:
B
Explanation:
carbon 12 is most useful to humans
If a 6N weight is hung on a spring, and it extends by 0.2m, what is the spring constant (k)? What do you think the units are?
Answer:
K = 30N/m
Explanation:
We use this equation:
F= k∆x
Where ∆x refers to the amount or stretch or compression and k is the spring constant.
F = force
k = spring constant
∆x = change in length of spring
We don't know the value of k, so we make k the subject:
k = F/∆x
k = 6N x 0.2m
k = 30N/m
SOMEONE PLS HELP ASAP!!
Which pair of objects will have the least gravitational attraction to each other?
Group of answer choices
Two marbles 12 centimeters apart.
A cinderblock and marble 6 centimeters apart.
A cinderblock and marble 12 centimeters apart.
Two cinder blocks 6 centimeters apart.
Answer:
Two cinder blocks 6 centimeters apart
Explanation:
im not 100% certain but the 2 cinder blocks are more dense than the other options
sry if its wrong
Calculate the average atomic mass for an imaginary element "E" that has the following isotope abundances:
56.67 % E-102.658 amu
43.33% E-104.770 amu
Answer:
Average atomic mass of E = 103.57 amu
Explanation:
Given data:
Average atomic mass of E = ?
Abundance of E-102.658 = 56.67%
Abundance of E-104.770 = 43.33%
Solution:
Average atomic mass of E = (abundance of 1st isotope × its atomic mass) +(abundance of 2nd isotope × its atomic mass) / 100
Average atomic mass of E = (56.67×102.658)+(43.33×104.770) /100
Average atomic mass of E = 5817.63 + 4539.68 / 100
Average atomic mass of E = 10357.31 / 100
Average atomic mass of E = 103.57 amu.
Heelllpp.!!
How many moles are in 78 grams of Chlorine
gas (CI)?
Answer:
Grams of chlorine gas to moles
The SI base unit for amount of substance is the mole. 1 grams Chlorine is equal to 0.028206357713029 mole.
Explanation:
What is the oxidation number for Ba?
A. +1
B. -2
C. +2
D. -1
Answer:
+2
Explanation:
Ba is present in group 2 and group 2 show + oxidation state
There have been made 2 attempts of oxygen production by potassium permanganate.In the first attempt they have got 75ml oxygen in 3 minutes whearas there have been got 100ml in 5 minutes by the 2nd attempt.In what case the speed of the oxygen production is bigger???
Pls explain your answer
Answer:
The speed of oxygen production is bigger in the first attempt.
Explanation:
In the first attempt, since 75ml oxygen is produced in 3 minutes, the rate of oxygen production is r = volume of oxygen/time = 75 ml/3 min = 25 ml//min
In the second attempt, since 100ml oxygen is produced in 5 minutes, the rate of oxygen production is r' = volume of oxygen/time = 100 ml/5 min = 20 ml//min
Since r = 25 ml/min > r' = 20 ml/min, the speed of oxygen production is bigger in the first attempt.
Enter the correct 4 digit code (no spaces)
