which of the following choices fits in the blank to complete the equation

Which Of The Following Choices Fits In The Blank To Complete The Equation

Answers

Answer 1

The equation that can be able to complete the reaction as it has been shown is option C

What is the free energy?

Free energy takes into account both the enthalpy (heat content) and entropy (degree of disorder) of a system. It provides a measure of the system's ability to do useful work or drive chemical reactions.

The formula for calculating free energy is:

G = H - TS

where:

G is the Gibbs free energy

H is the enthalpy (heat content) of the system

T is the temperature in Kelvin

S is the entropy (degree of disorder) of the system

Learn more about free energy:https://brainly.com/question/32191515


#SPJ1


Related Questions

Which of the following happens during a chemical change? Check all of the boxes that apply.
One atom or more changes into atoms of another element.
New substances with different properties are formed.
Solids, liquids, or gases may form.
Reaction mixtures always give off some heat.
Reaction mixtures always need to be heated.
00

Answers

The correct options that apply during a chemical change are:

A) One atom or more changes into atoms of another element.

B) New substances with different properties are formed.

C) Solids, liquids, or gases may form. Option A, B and C

During a chemical change, the arrangement of atoms in molecules is altered, resulting in the formation of new substances with different chemical properties. This is represented by option B. For example, when hydrogen gas (H₂) reacts with oxygen gas (O₂), a chemical change occurs, and water (H₂O) is formed. The properties of water, such as boiling point, density, and chemical reactivity, are distinct from those of its constituent elements.

Additionally, during a chemical change, atoms can rearrange to form molecules of different elements, as indicated in option A. For instance, during a nuclear reaction, such as radioactive decay, the nucleus of an atom can change, leading to the formation of atoms of different elements.

Option C is also correct. Depending on the specific reaction conditions, chemical changes can result in the formation of solids, liquids, or gases. For example, when a metal reacts with an acid, such as zinc with hydrochloric acid, a gas (hydrogen) is produced.

Options D and E are not universally applicable to all chemical changes. While some reactions may release heat energy (exothermic reactions), others may absorb heat energy (endothermic reactions). The requirement for heating or the release of heat depends on the specific reaction and its energy considerations.

In summary, during a chemical change, atoms can change into atoms of another element (A), new substances with different properties are formed (B), and solids, liquids, or gases may form (C).

For more such questions on  chemical change visit:

https://brainly.com/question/1222323

#SPJ8

A solution is made by dissolving 38.81 grams of nickel (II) sulfate, NiSO4, in enough water to make 0.467
liters of solution. Calculate the molarity of this solution.

Answers

The molarity of the NiSO₄ solution made by dissolving 38.81 grams of nickel (ii) sulfate, NiSO₄, in enough water to make 0.467 liters of solution is 0.535 M

How do i determine the molarity of the solution?

First, we shall obtain the mole of 38.81 grams of nickel (ii) sulfate, NiSO₄. Details below:

Mass of NiSO₄ = 38.81 grams Molar mass of NiSO₄ = 154.75 g/molMole of NiSO₄ = ?

Mole of NiSO₄ = mass / molar mass

= 38.81 / 154.75

= 0.25 mole

Now, we shall determine the molarity of the solution. Details below:

Mole of NiSO₄ = 0.25 moleVolume of solution = 10.467 LMolarity of solution = ?

Molarity of solution = mole / volume

= 0.25 / 0.467

= 0.535 M

Thus, the molarity of the solution is 0.535 M

Learn more about molarity:

https://brainly.com/question/16073358

#SPJ1

which of the following choice fits in the blank to complete the equation

Answers

To complete the equation, the blank should be filled with "ΔH°- ".

Option B is correct.

How do we explain?

The equation represents the standard Gibbs free energy change (ΔG°) in a chemical reaction in terms of the enthalpy change (ΔH°) and the entropy change (ΔS°). The equation is:

ΔG° = ΔH° - TΔS°

ΔG° represents the change in Gibbs free energy,

ΔH° represents the change in enthalpy,

T represents the temperature in Kelvin, and ΔS° represents the change in entropy.

The minus sign indicates that the change in Gibbs free energy is determined by the difference between the enthalpy and the product of temperature and entropy.

Learn more about entropy. at:

https://brainly.com/question/419265

#SPJ1

What is the coefficient for sodium chloride when this equation is balanced?

Answers

Answer:

To resolve this, we need to place the coefficient “2” in front of the sodium in the reactant, to give the equation shown below. 2 Na (s) + Cl 2 (g) → 2 NaCl (s) In this equation, there are two sodiums in the reactants, two sodiums in the products, two chlorines in the reactants and two chlorines in the products; the equation is now balanced.

Explanation:

How do I solve the radius of the metal Cylinder, volume & Density?

Answers

e. The radius of the metal cylinder is 1.27 cm / 2 = 0.635 cm.

f. The volume of the metal cylinder is 4.745 cm³

g. The density of the metal cylinder is 7.53 g/cm³

What are the radius, volume & Density of the metal Cylinder?

Data given:

b. Mass of metal cylinder: 35.732 g

c. Length of metal cylinder: 3.15 cm

d. Diameter of metal cylinder: 1.27 cm

e. Radius of metal cylinder: The radius (r) of a cylinder is half of its diameter. Therefore, the radius of the metal cylinder is 1.27 cm / 2 = 0.635 cm.

To calculate the volume (V) of the metal cylinder;

V = πr²h, where π is approximately 3.14159, r is the radius, and h is the height (length) of the cylinder.

Volume of metal cylinder:

V = 3.14159 * (0.635 cm)² * 3.15 cm = 4.745 cm³

Density of metal cylinder:

Density (ρ) is defined as mass (m) divided by volume (V). Therefore, the density of the metal cylinder is ρ = 35.732 g / 4.745 cm³ = 7.53 g/cm³ (rounded to two decimal places).

So, the radius of the metal cylinder is 0.635 cm, the volume is 4.745 cm³, and the density is 7.53 g/cm³.

Learn more about density and volume at: https://brainly.com/question/1354972

#SPJ1

Two samples of carbon come into contact. A heat transfer will occur between sample A and sample B. What must be
true for heat to transfer from sample A to sample B?
O The average kinetic energy of A is greater than that of B.
O The average kinetic energy of B is greater than that of A.
O The average kinetic energy of both samples is equal.
O The average kinetic energy does not determine the direction of heat transfer.

Answers

The direction of heat transfer between two samples of carbon depends on their temperature difference, and not solely on their average kinetic energy. While the average kinetic energy of a substance is related to its temperature, it is not the determining factor for the direction of heat transfer.

When two samples of carbon come into contact, a heat transfer will occur between sample A and sample B. The direction of heat transfer is dependent on the temperature difference between the samples. Heat transfer always flows from a hotter object to a cooler object, so if sample A is hotter than sample B, heat will flow from A to B. If sample B is hotter than sample A, heat will flow from B to A.
The average kinetic energy of the molecules in a substance is related to its temperature. The higher the average kinetic energy, the higher the temperature of the substance. However, the average kinetic energy does not determine the direction of heat transfer.
It is possible for a substance with a lower average kinetic energy (and therefore a lower temperature) to transfer heat to a substance with a higher average kinetic energy (and therefore a higher temperature). This can occur if the substance with the lower temperature has a greater heat capacity, which means it can absorb more heat without a significant increase in temperature.

for more questions on kinetic energy

https://brainly.com/question/25959744

#SPJ8

“a 5 carat diamond has a mass of 1.000 g. If the gemstone displaces a liquid from 1.00 mL to 1.30 mL, what is the density of the diamond?”

Answers

A 5 carat diamond has a mass of 1.000 g. If the gemstone displaces a liquid from 1.00 mL to 1.30 mL, and the density of the diamond is 3.33 g/mL

To calculate the density of the diamond, we can use the formula:

Density = Mass / Volume

Given that the mass of the diamond is 1.000 g and it displaces a liquid from 1.00 mL to 1.30 mL, we can substitute these values into the formula:

Density = 1.000 g / (1.30 mL - 1.00 mL)

By subtracting the initial volume from the final volume, we find:

Density = 1.000 g / 0.30 mL

Performing the division, we obtain:

Density = 3.33 g/mL

Therefore, the density of the diamond is 3.33 g/mL.

It's important to note that the units for density are grams per milliliter (g/mL) because the mass is given in grams and the volume is given in milliliters.

Understanding and applying the formula for density allows us to determine the mass per unit volume of a substance. In this case, the density provides information about how much mass is contained within a given volume for the diamond.

Know more about Volume here:

https://brainly.com/question/14197390

#SPJ8

How does a straight-chain alkane that has five carbon atoms differ from a cycloalkane that has five carbon atoms?

Answers

Answer:

A straight-chain alkane that has five carbon atoms, also known as pentane, differs from a cycloalkane that has five carbon atoms, also known as cyclopentane, in terms of their molecular structure and properties. Pentane has a linear, straight-chain structure, while cyclopentane has a ring-shaped structure. This difference in structure affects their physical and chemical properties. For example, pentane has a higher boiling point and lower melting point than cyclopentane due to the differences in the strength of the intermolecular forces between their molecules

Explanation:

The table describes a gas stored in four different containers. Properties of Stored Gas Container Properties 1 · Low number of collisions with container walls · Medium average kinetic energy · Large number of particles 2 · Large number of collisions with container walls · Medium average kinetic energy · Small number of particles with little spaces between them 3 · Large number of collisions with container walls · High average kinetic energy · Large number of particles with large spaces between them 4 · Few collisions with container walls · Low average kinetic energy · Small number of particles Which container has gas stored at the highest temperature? 1 2 3 4

Answers

Container 3 has the gas stored at the highest temperature.

Temperature is a measure of the average kinetic energy of the particles in a substance. In the given table, it is stated that container 3 has a large number of collisions with container walls, high average kinetic energy, and large number of particles with large spaces between them.

These properties indicate that the gas in container 3 has higher kinetic energy and more vigorous movement compared to the other containers.

Container 1 has a low number of collisions with container walls and a medium average kinetic energy. This suggests that the gas in container 1 has lower energy and less movement than the gas in container 3.

Container 2 has a large number of collisions with container walls, but it also has a small number of particles with little spaces between them. While the collisions may be frequent, the limited number of particles and the lack of space between them may result in lower overall kinetic energy compared to container 3.

Container 4 has few collisions with container walls, low average kinetic energy, and a small number of particles. These properties indicate that the gas in container 4 has the lowest energy and least movement among all the containers.

Container 3

For more such questions on temperature visit;

https://brainly.com/question/4735135

#SPJ8

the human population grew form 1 billion in the year 1800to blank billion in the year 200

Answers

The human population grew from 1 billion in the year 1800 to approximately 7.8 billion in the year 2021.

In the year 1800, the estimated global human population was around 1 billion. Over the next two centuries, significant advancements in technology, medicine, agriculture, and improved living conditions contributed to a rapid increase in population.

The growth rate of the human population began to accelerate in the 20th century. By the year 1927, the global population reached 2 billion. It took just 33 years for the population to double, reaching 4 billion in 1960. The population continued to grow at an unprecedented rate, with 6 billion people on Earth by the year 1999. As of 2021, the estimated global population stands at approximately 7.8 billion.

This remarkable growth in population can be attributed to several factors, including advancements in healthcare leading to reduced infant mortality rates, improved access to education and contraception, increased agricultural productivity, and overall socio-economic development.

It's important to note that population growth has not been uniform across all regions. Different countries and regions have experienced varying rates of population growth due to factors such as fertility rates, mortality rates, migration patterns, and government policies.

For more such questions on population visit:

https://brainly.com/question/30148263

#SPJ8

3. A hydrogen atom with velocity 1.8 X
10³ ms collides with a chlorine atom
with velocity 2,1 x 10 ms. Both are
moving in the same direction. They
then form a hydrogen chloride mole-
cule. The masses of the hydrogen and
chlorine atoms are in the ratio 1 to
35.5. What is the velocity of the newly
formed molecule?

Answers

The velocity of the the newly formed molecule, given that the atoms of the newly formed molecules moved in the same direction is 2.149×10³ m/s

How do I determine the velocity of the the newly formed molecule?

The velocity of the the newly formed molecule can be obtained as illustrated below:

Initial velocity of hydrogen atom (u₁) = 1.8×10³ m/sMass of hydrogen atom (m₁) = 1 gInitial velocity of chlorine atom (u₂) = 2.1×10³ m/sMass of chlorine atom (m₂) = 35.5 gVelocity of newly formed molecule (v) = ?

m₁u₁ + m₂u₂ = v(m₁ + m₂)

(1 × 1.8×10³) + (35.5 × 2.1×10³) = v(1 + 35.5)

1.8×10³ + 76650 = 36.5v

78450 = 36.5v

Divide both sides by 36.5

v = 78450 / 36.5

= 2.149×10³ m/s

Thus, the velocity of the newly formed molecule is 2.149×10³ m/s

Learn more about velocity after collison:

https://brainly.com/question/28151651

#SPJ1

Which of the following is a possible
way to describe the SO3 component in
the reaction below?
Sa(s) + 120₂(g) → 8SO3(g)

A. 8 atoms SO3
B. 8 molecules SO3
C. 80.07g SO3
D. 32 LSO3

Answers

The correct answer is B. 8 molecules [tex]SO_3[/tex]. Option B

In the given reaction:

S(s) + [tex]O_2[/tex](g) → [tex]SO_3[/tex](g)

The stoichiometric coefficient in front of the [tex]SO_3[/tex]molecule is 8, which indicates that 8 molecules of [tex]SO_3[/tex]are formed as a product. This coefficient represents the ratio of the number of molecules involved in the reaction.

Option A (8 atoms [tex]SO_3[/tex]) is incorrect because it only mentions the number of atoms, not molecules. The stoichiometric coefficient does not represent the number of atoms, but rather the number of molecules.

Option C (80.07g [tex]SO_3[/tex]) is incorrect because it mentions a specific mass. The stoichiometric coefficient does not directly represent the mass of the substance, but rather the relative amount of molecules involved in the reaction.

Option D (32 [tex]SO_3[/tex]) is incorrect because it mentions a specific volume. The stoichiometric coefficient does not directly represent the volume of the substance, but rather the relative amount of molecules involved in the reaction.

Therefore, the correct way to describe the [tex]SO_3[/tex]component in the reaction is option B: 8 molecules [tex]SO_3[/tex]. This represents the ratio of the number of molecules of [tex]SO_3[/tex]that are produced in the reaction.

Option B

For more wsuch question on   molecules visit:

https://brainly.com/question/475709

#SPJ8

What is the purpose of the cotton wool plug oh the conical flask

Answers

The purpose of the cotton wool plug on the conical flask is to permit the free passage of air over the edge of the flask and prevent the establishment of semi-anaerobic conditions in the culture. It can also be used to allow gases produced during a reaction to escape while preventing contaminants from entering the flask.

According to the lab guide, which changes below will you look for in order to test the hypothesis? Check all that apply. changes in shape or size color changes whether changes are easily reversible temperature changes formation of precipitates or gases changes of state (gas, liquid, or solid)

Answers

The correct options are: changes in shape or size, color changes, formation of precipitates or gases, and whether changes are easily reversible.

According to the lab guide, the following changes below will be looked for in order to test the hypothesis: changes in shape or sizecolor changesformation of precipitates or gaseswhether changes are easily reversibleThese changes are the characteristics that will be observed in order to test the hypothesis in the lab. Furthermore, temperature changes and changes of state (gas, liquid, or solid) may also occur and can be observed while testing the hypothesis.

For more question precipitates

https://brainly.com/question/13859041

#SPJ8

Answer:

A,B,E,F

Explanation:

Use your data, the equation to the right, and the specific heat of water (4.184 J/g C) to compute the specific heat values of each metal. Use a calculator and round to the nearest hundredth place.

Answers

The heat capacity for the metals are;

Aluminum -  0.89

Copper - 0.11

Iron - 0.44

Lead - 0.12

What is the specific heat?

The specific heat of a substance is denoted by the symbol "C" and is typically measured in units of J/g·°C (joules per gram per degree Celsius) or cal/g·°C (calories per gram per degree Celsius).

The specific h

We have that;

For Aluminum;

c = 4.184 * 39.85 * 4.7/11.98 * 72.9

= 783.6/873.3

= 0.89

For Copper;

c =  4.184 * 12.14 * 1.9/12.14 * 75.4

= 96.5/915.3

= 0.11

For Iron

c =  4.184 * 40.24 * 2.4/12.31 * 75.1

= 404.1/924.5

= 0.44

For Lead

c = 4.184 * 39.65 * 0.7/12.46 * 76.7

c = 116.1/955.68

= 0.12

Learn more about specific heat:https://brainly.com/question/31608647

#SPJ1

Which statement about members of a homologous series is true

Answers

The statement "Each member of a homologous series differs from its nearest neighbors by 14 amu" is true of members about a homologous series.

What are homologous series?

In organic chemistry, a homologous series unveils itself as a sequential assembly of compounds exhibiting an identical functional group, boasting akin chemical traits. Within this series, the constituents can either sport a branched or unbranched structure, or deviate through the molecular formula of CH2 and a molecular mass variation of 14u.

This divergence may manifest as the elongation of a carbon chain, as observed in the linear alkanes (paraffins), or as the augmentation in the count of monomers forming a homopolymer, such as amylose.

The entities belonging to a homologous series typically embrace a fixed assortment of functional groups, thereby conferring upon them resemblant chemical and physical characteristics.

Learn about homologous series here https://brainly.com/question/1569487

#SPJ1

Which of the following items are made from renewable resources? Select the two correct answers. (1 point)
Responses

plastic fork
plastic fork

metal can
metal can

leather jacket
leather jacket

electronics
electronics

printer paper

Answers

A leather jacket and printer paper are examples of items that can be made from renewable resources, while plastic forks, metal cans, and electronics are not considered renewable due to their reliance on non-renewable materials and processes. Option  C, E

The two correct answers that are made from renewable resources are:

C) Leather jacket: Leather is derived from animal hides, which are a byproduct of the meat industry. As long as there is a sustainable and responsible approach to animal farming, the production of leather can be considered renewable. The hides are obtained from animals that are raised for meat consumption, and their use in leather production helps reduce waste.

E) Printer paper: Printer paper can be made from various sources, including trees, bamboo, and recycled paper fibers. If the paper is sourced from sustainably managed forests or from fast-growing plants like bamboo, it can be considered renewable. Additionally, the use of recycled paper fibers reduces the demand for materials and promotes a more circular economy.

The other options, A) plastic fork, B) metal can, and D) electronics, are not made from renewable resources:

A) Plastic fork: Plastics are typically derived from fossil fuels, which are non-renewable resources. The production of plastic involves the extraction and processing of petroleum or natural gas, both of which are finite resources.

B) Metal can: Metal cans are predominantly made from aluminum or steel. While these metals can be recycled, their initial production requires the extraction of raw materials from the Earth, which is not a renewable process.

D) Electronics: Electronics are made from a wide range of materials, including metals, plastics, and various chemical compounds. The production of electronics involves the extraction of raw materials, many of which are non-renewable resources.

Option C and E.

For more such questions on renewable resources visit:

https://brainly.com/question/27734408

#SPJ8

What does the red line in the diagram below represent?

OA. The activation energy
OB. The equilibrium position
C. The potential energy of the reactants
D. The difference in energy between the reactants and products

Answers

The red line in the diagram below represent

A. The activation energy

What is the activation energy?

In the given diagram, the red line represents the activation energy. Activation energy is the minimum amount of energy required for a chemical reaction to occur. It represents the energy barrier that must be overcome for the reactants to form products.

The reactants start with a certain amount of potential energy, and the activation energy represents the additional energy needed to reach the transition state where the reaction can proceed.

Learn more about Activation energy at

https://brainly.com/question/1380484

#SPJ1

How many atoms are in 12 g of Carbon-12 (12C)?

Answers

There are approximately 6.022 × 10^23 atoms in 12 grams of Carbon-12 (12C).

The number of atoms in a given amount of a substance can be calculated using Avogadro's number, which represents the number of atoms or molecules in one mole of a substance. Avogadro's number is approximately 6.022 × 10^23.

Carbon-12 is a specific isotope of carbon, with an atomic mass of 12 atomic mass units (amu). One mole of Carbon-12 has a mass of 12 grams. Since one mole of any substance contains Avogadro's number of particles, in the case of Carbon-12, it contains 6.022 × 10^23 atoms.

Therefore, if we have 12 grams of Carbon-12, which is equal to one mole, we can conclude that there are approximately 6.022 × 10^23 atoms in this amount of Carbon-12.

In summary, 12 grams of Carbon-12 contains approximately 6.022 × 10^23 atoms. Avogadro's number allows us to relate the mass of a substance to the number of atoms or molecules it contains, providing a fundamental concept in chemistry and enabling us to quantify and understand the microscopic world of atoms and molecules.

for such more questions on atoms

https://brainly.com/question/6258301

#SPJ8

0.45g of sodium chloride in 2g of water. What is the concentration in g per dm cube​

Answers

Answer:divide

Explanation:this is not science this is math dont be lazy just divide

how do you balance this equation
2h2s+3o2+so2

Answers

The balanced equation is: 4 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 4 [tex]SO_2[/tex]+ 8 [tex]H_2O[/tex]

The given chemical equation is unbalanced. To balance it, we need to adjust the coefficients in front of each chemical species until the number of atoms on both sides of the equation is equal.

The unbalanced equation is:

2 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ [tex]SO_2[/tex]

Let's start by balancing the sulfur (S) atoms. We have two sulfur atoms on the left side and one sulfur atom on the right side. To balance the sulfur, we can place a coefficient of 2 in front of the [tex]SO_2[/tex]:

2 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 2 [tex]SO_2[/tex]

Now, let's balance the hydrogen (H) atoms. We have four hydrogen atoms on the left side (2 from each [tex]H_2S[/tex]) and none on the right side. To balance the hydrogen, we can place a coefficient of 4 in front of the water (H2O) on the right side:

2 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 2 [tex]SO_2[/tex]+ 4 [tex]H_2O[/tex]

Finally, let's balance the oxygen (O) atoms. We have six oxygen atoms on the right side (3 from [tex]O_2[/tex] and 3 from 2 [tex]SO_2[/tex]) and three on the left side (2 from [tex]H_2S[/tex]). To balance the oxygen, we can place a coefficient of 3/2 in front of the O2:

2 [tex]H_2S[/tex]+ (3/2) [tex]O_2[/tex]→ 2 [tex]SO_2[/tex]+ 4 [tex]H_2O[/tex]

To remove the fractional coefficient, we can multiply all coefficients by 2:

4 [tex]H_2S[/tex] + 3 [tex]O_2[/tex]→ 4 [tex]SO_2[/tex]+ 8 [tex]H_2O[/tex]

Now the equation is balanced, with an equal number of atoms on both sides. The balanced equation is:

4 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 4 [tex]SO_2[/tex]+ 8 [tex]H_2O[/tex]

For more such questions on  balanced equation visit:

https://brainly.com/question/23877810

#SPJ8

How do you balance this equation
2h2s+3o2+so2

Answers

The balanced equation is: 4 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 4 [tex]SO_2[/tex]+ 8 [tex]H_2O[/tex]

The given chemical equation is unbalanced. To balance it, we need to adjust the coefficients in front of each chemical species until the number of atoms on both sides of the equation is equal.

The unbalanced equation is:

2 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ [tex]SO_2[/tex]

Let's start by balancing the sulfur (S) atoms. We have two sulfur atoms on the left side and one sulfur atom on the right side. To balance the sulfur, we can place a coefficient of 2 in front of the [tex]SO_2[/tex]:

2 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 2 [tex]SO_2[/tex]

Now, let's balance the hydrogen (H) atoms. We have four hydrogen atoms on the left side (2 from each [tex]H_2S[/tex]) and none on the right side. To balance the hydrogen, we can place a coefficient of 4 in front of the water (H2O) on the right side:

2 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 2 [tex]SO_2[/tex]+ 4 [tex]H_2O[/tex]

Finally, let's balance the oxygen (O) atoms. We have six oxygen atoms on the right side (3 from [tex]O_2[/tex]and 3 from 2 [tex]SO_2[/tex]) and three on the left side (2 from [tex]H_2S[/tex]). To balance the oxygen, we can place a coefficient of 3/2 in front of the O2:

2 [tex]H_2S[/tex]+ (3/2) [tex]O_2[/tex]→ 2 [tex]SO_2[/tex]+ 4 [tex]H_2O[/tex]

To remove the fractional coefficient, we can multiply all coefficients by 2:

4 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 4 [tex]SO_2[/tex]+ 8 [tex]H_2O[/tex]

Now the equation is balanced, with an equal number of atoms on both sides. The balanced equation is:

4 [tex]H_2S[/tex]+ 3 [tex]O_2[/tex]→ 4 [tex]SO_2[/tex] + 8 [tex]H_2O[/tex]

For more such questions on  balanced equation visit:

https://brainly.com/question/14072552

#SPJ8

Solve the problem.
A menu in a restaurant allows you to pick some items from Column A and some from
Column B. Column A has 24 items. Column B has 16 items. If you and 3 friends want
to order everything from both columns, but not order any item more than once, how
many items from each column would you each choose (assuming each person orders
the same number of items from each column)?
Select the correct answer.
4 from A, 4 from B
6 from A, 4 from B
6 from A, 6 from B
4 from A, 6 from B

Answers

Each person should choose 6 items from Column A and 4 items from Column B, ensuring that everyone orders the same number of items from each column. Option B

To divide the items evenly among four people while ensuring that each person orders the same number of items from each column, we need to find the common divisor of the number of items in each column.

Column A has 24 items, and Column B has 16 items. The common divisor of 24 and 16 is 8. Therefore, each person should choose 8 items.

Since there are 24 items in Column A, and each person needs to choose 8 items, the answer is 24 divided by 8, which equals 3. Each person should choose 3 items from Column A.

Similarly, since there are 16 items in Column B, and each person needs to choose 8 items, the answer is 16 divided by 8, which equals 2. Each person should choose 2 items from Column B.

Therefore, the correct answer is:

B) 6 from A, 4 from B

Each person should choose 6 items from Column A and 4 items from Column B, ensuring that everyone orders the same number of items from each column.

For more such questions on Column  visit:

https://brainly.com/question/17532859

#SPJ8

Other Questions
when companies save money so that they can replace an item once it is no longer of use, what are the accounting for? a) liabilities. b) equity. c) depreciation. d) operating costs the role of inflammation in the development of atherosclerosis includes: A particle moves according to a law of motion s = f(t) , t 0, where t is measured in seconds and s in feet. (If an answer does not exist, enter DNE.) f(t)=t^39t^2+24t (a) Find the velocity (in f/s) at time t.(b) What is the velocity ( in ft/s) after 1 second? (c) When is the particle at rest? (Enteryour answers as a comma-separated list.)(d) When is the particle moving in the positive direction? (Enter your answer using interval notation.) (e) Draw a diagram to mllustrate the motion of the particle and use it to find the total distance (in ft) traveled during the first 6 seconds.(f) Find the acceleration ( in f/s^2) after 1 second. macgregor argues for thinking critically about the problematic aspects of the earth charter in search for a green cosmopolitanism that is less banal and more open to democratic dialogue.true or false Suppose rising sea levels again separate the continents of North and South America. Choose one of Earth's spheres, and explain how it might interact differently with another of Earth's spheres because of this change. (1%) set: display the common elements that appear in below twoarrayslist 1: 5521016list 2: 92310334356731 A pipe in a district heating network is transporting over-pressurized hot water (10 atm) at 120 C. The pipe is 1 km long, has an inner radius of 0.5 m and pipe wall thickness of 0.02 m. An insulation layer is installed around the pipe. The pipe has a thermal conductivity of 50 W/m-K. The convective heat transfer coefficient of the air surrounding the insulation layer of the pipe is 2 W/m-K and the temperature of the air is 0 C. The convective heat transfer coefficient between the hot water and the inner surface of the pipe is 500 W/m-K. Assume that the cost of heat is 100 $ per 1.0x10 Joule. The material used for the insulation layer has a thermal conductivity of 1.0 W/m-K. The cost of the installation of the insulation layer is 100 S per unit volume (Im') including the material cost and labor cost. Assume that the temperature of the hot water is constant (120 "C) throughout the pipe. The thickness of the insulation layer is 100 mm. (a) (20pts) Determine the rate of heat transfer from the water in the pipe to the air when the insulation layer was NOT installed. (b) (20pts) Determine the rate of heat transfer through the water in the pipe to the air when the insulation layer was installed. (c) (20pts) Installing the insulation is considered to be cost-effective when the amount of heat energy saving by installing the insulation layer for the first 1 year is higher than the installation cost of the insulation layer when compared to the case when the insulation layer is not installed. Assume that the hot water flows in the pipe consistently throughout the first year. Determine whether this insulation layer is cost-effective or not. what type of reaction is performed with the elephant toothpaste demonstration? Role of Governments with Respect to Problems in Global SupplyChains Presented below are a number of independent situations.For each individual situation, determine the amount that should be reported as cash.1. Checking account balance $944,870; certificate of deposit $1,431,100; cash advance to subsidiary of $994,230; utility deposit paid to gas company $191. What is the cash balance ? Consider the language LangComments that defines the form of comments included in a computer program. Comments are denoted by an opening comment symbol { and a closing comment symbol }. Each opening comment symbol must have a matching closing comment symbol. Further, the symbols */ and /* can be used to denote two opening and two closing comment symbols respectively. A string of mixed comment symbols is legal if and only if the string produced by replacing */ with {{ and /* with }} is a balanced comments sequence.Define an unambiguous grammar for LangComments. (6 marks)Using your grammar defined in (i) above, draw the parse tree for the following sequence: */{/*}. (2 marks)Show that the following grammar is ambiguous by finding a string that has two different syntax trees. (2 marks)T val | T - val | -TTransform the grammar in (b) above into an unambiguous grammar where prefix minus binds stronger than infix minus, and show that your new grammar is unambiguous by using it to generate a parse tree for the string you provided in (b) above. (5 marks) You have been asked to advise several firms on their supply chain management organizations. Specifically, you have been asked to help each company develop a set of supply chain performance metrics for use across their individual organizations. Each of the firms (A, B, and C) have put together a list of the top four metrics used by their Vice Presidents of Supply Chain.Part 1Company A's top four supply chain performance metrics are listed below. Classify each of the following metrics as to whether they are Asset Utilization, Efficiency/Productivity or Customer Response/Effectiveness metrics1. Average Pallets Loaded per Hour at DCS. Select an optionA. UtilizationB. ProductivityC. Effectiveness2. Average Cost per Ton-Kilometer Hauled. Select an optionA. UtilizationB. ProductivityC. Effectiveness3. Average Time to Process Order. Select an optionA. UtilizationB. ProductivityC. Effectiveness4. Total Logistics Cost per Pallet. Select an optionA. UtilizationB. ProductivityC. EffectivenessPart 2Which of the following statements are true for company A and its existing set of supply chain metrics?Select all correct answersA. These metrics are a measure of transformational efficiencyB. These metrics will most likely lead to more efficient operationsC. These metrics are best suited for firms with high margins and short lifecycle productsD. These metrics are best suited for firms with low margins and mature productsE. None of the abovePart 3Company B uses a different set of metrics. Their top four supply chain performance metrics are listed below. Classify each of the following metrics as to whether they are Asset Utilization, Efficiency/Productivity or Customer Response/Effectiveness metrics1. Average item Fill Rate. Select an optionA. UtilizationB. ProductivityC. Effectiveness2. Percent of Orders that were Perfect. Select an optionA. UtilizationB. ProductivityC. Effectiveness3. Percent of On-Time Orders. Select an optionA. UtilizationB. ProductivityC. Effectiveness4. Number of Orders Processed without Errors. Select an optionA. UtilizationB. ProductivityC. EffectivenessPart 4Which of the following statements are true for this company and its existing set of supply chain metrics?Select all correct answersA. These metrics are best suited for firms with high margins and short lifecycle productsB. These metrics are best suited for firms with low margins and mature productsC. These metrics will most likely lead to more efficient operationsD. These metrics are a measure of the quality of the process outputE. None of the abovePart 5Company C's top four supply chain performance metrics are listed below. Classify each of the following metrics as to whether they are Asset Utilization, Efficiency/Productivity or Customer Response/Effectiveness metrics1. Percent of DC Used per Month. Select an optionA. UtilizationB. ProductivityC. Effectiveness2. Ratio of Labor Used to Labor Budgeted per Month. Select an optionA. UtilizationB. ProductivityC. Effectiveness3. Inventory Turns. Select an optionA. UtilizationB. ProductivityC. Effectiveness4. Hours of Downtime for Packaging Equipment. Select an optionA. UtilizationB. ProductivityC. EffectivenessPart 6Which of the following statements are true for this company and its existing set of supply chain metrics?Select all correct answersA. These metrics are best suited for firms with high margins and short lifecycle productsB. These metrics are a measure of the input usageC. These metrics are best suited for firms with low margins and mature productsD. These metrics will most likely lead to better asset utilizationE. None of the above The following information pertains to Questions 1-3. A waveguide is formed from a hollow conducting tube of some cross section that is filled with a material having a dielectric constant (relative permittivity) of 2.56. The dominant mode of this waveguide is a TE mode with cutoff frequency of 6 GHz. The next higher order mode is a TM mode with a cutoff frequency of 8.5 GHz. Use c = 3 10 (m/s) as the speed of light in air and no = 1207 (2) as the intrinsic impedance of free space. What is the guide wavelength of the dominant mode at 7.8 GHz? Type your answer in millimeters to one place after the decimal. Question 2 What is the wave impedance of the dominant mode at 7.1 GHz? Type your answer in ohms to one place after the decimal. Question 3 1 pts 2 pts Assume all of the dielectric material is removed from the waveguide leaving an air-filled hollow tube. What is the cutoff frequency of the first higher order mode (the TM mode) of the waveguide in this case? Type your answer in GHz to three places after the decimal. Hint: Assume for this geometry that the cutoff wavenumber has the same value independent of the material filling the guide. which type of fund falls into the category of a defined contribution plan? Question 8 A multivalued attribute cannot be used in a document database. (A) True B) False Given a grammar G with the production rules: string "aaabbabba"Note: Provide step by step on derivationtableS aB SbA AaS AbAAAa BbS BaBBBb Which of the following best explains how an increase in supplier costs would affect Aggregate Demand (AD)/Aggregate Supply (AS) model:a. AS would shift upwardb. AS would shift downwardc. AS would shift to the leftd. AS would shift to the righte. AD would shift to the leftf. AS and AD would both shift left A dictionary courses lists the Harvard summer school classes a student is king, along with information about the classes. For example, a) Write a function total_homeworks (courses) that takes a course dictionary and returns the total number of homeworks that the student has in all of their classes, using a for loop. You may assume the dictionary for every class has the same keys as CSCI-S7. b) Write a function total_homeworks2 (courses) that returns the same computation as a) but in one line using the function sum and a list comprehension. You should show your functions work using a main method and the ctionary provided above. Recall the pokedex data structure discussed in class is a list of pokemon data structures, each one of which is a dictionary representing a pokemon, for example: \{ "id" : 2 , "name" : \{ "english": "Ivysaur", "japanese": "", "chinese" "", "french""Herbizarre" \}, "type": [ "Grass", "Poison"], "base" : \{ "HP": 60, "Attack" : 62, "Defense" : 63, "Sp. Attack": 80, "Sp. Defense": 80, "Speed": 60 \} \} The values of this dictionary are: - integers for the key 'id' - a language to name dictionary for the key 'name' - a list of types for the key 'type' - and a trait to integer dictionary for the key 'base'. For this problem we have included the full pokedex list in the file pokedex py, which you can find in the pset5 template zip-file. The command import pokedex will give you access to the list via the variable name pokedex.data. Write a function def pokesearch(trait, minimum, maximum): that takes a valid trait (One of 'HP', 'Attack', 'Sp. Attack', 'Sp. Defense', or 'speed' ) and minimum and maximum values for that trait, and returns a list of pokemon data structures, like the one above for Ivysaur, with trait value between minimum and maximum. You should also write a main function that asks the user for a the values trait, minimum and maximum and prints out the names of the matching pokemon in english along with the value of the trait. A sample run of your program might look like: What Pokemon trait would you like to search on? Valid traits are HP, Attack, Sp. Attack, Sp. Defense, Speed: HP What is the minimum value for HP? 76Your answers need not be sorted, but you will earn 3 bonus points for sorting the results by name. Your task is to write a Python program that computes the above statistics for the full text of Romeo and Juliet. For convenience we've provided a file romeo_and_juliet_data.py that you should import, containing the full text that you should run your program on. The text is stored in a list of strings, lines, which has one entry per line of text in the play. To make your life easier, we've already removed all punctuation for you from the text. Running the program should produce the output: should return the dictionary {6:3,2:1,4:1} Your solution cannot use 14 separate variables for the counts or proportions. It also cannot use a 14 if statements or a 14-fold if-elif statement. You will receive 0 points for such a solution! It has been reported that a local middle school basketball star has a vertical leap of 90 cm. Ignoring air resistance, what is the initial velocity required to jump this high? Round your final answer to three decimal place. The initial velocity required to jump 90 cm is roughly _____ m/s. Findfiff(t)=2/t,f(4)=10,f(4)=7.