Which of the following conditions must be met for an object to be in equilibrium. (may be more than one answer) Sum of forces in x-direction is zero Sum of forces = zero Sum of torques is zero Speed is zero Object must not be spinning

According to the question the magnitude of the angular momentum of the coconut 0.042 kg•m²/s.

Angular momentum is a physical quantity that describes the rotational motion of an object. It is a vector quantity, meaning it has both direction and magnitude. It is the product of an object's rotational inertia, or moment of inertia, and its angular velocity. Angular momentum is conserved in systems that have no external torque acting on them, meaning the total angular momentum of a system remains constant. This principle is important in the fields of physics, engineering, and astronomy, where angular momentum is used to describe the motion of stars and planets.

L = mωI
L = m(2π/T)t(2/5)mr² = (4π/5T)m²r²t

For a coconut with a mass of 0.5 kg, a radius of 0.1 m, and a period of 1 s, the magnitude of the angular momentum is L = (4π/5) (0.5 kg)² (0.1 m)² (1 s) = 0.042 kg•m²/s.

To learn more about angular momentum
https://brainly.com/question/4126751
#SPJ4

When a convex lens is placed on a flat glass plate and illuminated from above with monochromatic red light, concentric bands of red and dark are observed.

These bands are a result of the interference of light waves that are reflected from the top and bottom surfaces of the lens and the glass plate. The areas of constructive interference appear red, while the areas of destructive interference appear dark.

At the exact center of the lens where the lens and the glass plate are in direct contact, one observes a dark spot. This is because the thickness of the lens and the glass plate is the same at the center, so the light waves that are reflected from the top and bottom surfaces of the lens and the glass plate are in phase and cancel each other out. As a result, no light is transmitted through this region, and a dark spot is observed.

This phenomenon is known as the "Newton's rings" and is commonly used in the field of optics to measure the flatness of surfaces. The size of the dark spot at the center of the lens depends on the thickness of the lens and the glass plate, and the wavelength of the light used. The smaller the thickness and the shorter the wavelength, the smaller the size of the dark spot.

To know more about convex lens visit

https://brainly.com/question/15708125

#SPJ11

Radiative energy refers to energy carried by light and transmitted through space in the form of electromagnetic waves.

What is radiative energy and how is it transmitted?

Radiative energy refers to energy that is transmitted through space in the form of electromagnetic waves. This can include visible light, infrared radiation, ultraviolet radiation, radio waves, and other forms of electromagnetic radiation.

This type of energy is responsible for a wide range of phenomena, including heat transfer, photosynthesis, and the operation of electronic devices such as radios and televisions. Therefore, radiative energy is not necessarily the same as heat energy, energy from nuclear power plants, energy used to power home radiators, or energy of motion.

To learn more about Radiative energy, visit: https://brainly.com/question/31106089

#SPJ4

AM and FM radio stations differ in the way they transmit signals. The difference in modulation techniques and bandwidth allows FM radio stations to transmit higher quality sound and have less interference compared to AM radio stations.

AM stands for Amplitude Modulation and FM stands for Frequency Modulation. AM radio signals vary the amplitude of the carrier wave to transmit information. On the other hand, FM radio signals vary the frequency of the carrier wave to transmit information. This difference in modulation allows FM radio stations to transmit higher quality sound than AM radio stations. FM radio stations also have a wider bandwidth than AM radio stations, allowing them to transmit more information, including stereo sound. FM radio stations are also less susceptible to interference from electrical appliances and atmospheric conditions, which is a common problem for AM radio stations. FM radio stations are typically found on the higher end of the frequency spectrum and are often used for commercial radio broadcasts.

learn more about transmit signals Refer: https://brainly.com/question/16248997?

#SPJ11

The law of diminishing marginal product of labor is demonstrated by a decrease in the additional output produced by adding more units of labor to a fixed amount of capital. This means that as more labor is added, the additional output per unit of labor decreases.

In economics, the law of diminishing marginal product of labor refers to a concept that explains how the output of production decreases when additional units of labor are added to a fixed amount of capital. This happens because there are only a limited number of resources available, and adding more labor beyond a certain point will lead to less efficient production.

For example, if a factory has a fixed amount of machinery and hires more workers, each worker may not have enough tools or space to work efficiently. As a result, the additional output produced by each worker will start to decrease, and eventually, adding more workers will not result in any additional output at all.

In summary, the law of diminishing marginal product of labor demonstrates that there is a limit to how much additional output can be produced by adding more units of labor to a fixed amount of capital.

To know more about  marginal product refer to

https://brainly.com/question/13623353

#SPJ11

True, a particle is said to be extremely relativistic when its kinetic energy is much greater than its rest energy. This means that the particle is traveling at speeds close to the speed of light, causing significant relativistic effects.

When we say that a particle is extremely relativistic, we mean that its kinetic energy is significantly larger than its rest energy. This implies that the particle is moving at speeds that are close to the speed of light, which is approximately 299,792,458 meters per second in a vacuum.

In the realm of special relativity, as described by Albert Einstein's theory, objects with mass experience a range of effects as they approach the speed of light. These effects include time dilation, length contraction, and an increase in mass, among others. As a particle approaches the speed of light, these relativistic effects become more pronounced.

The kinetic energy of an object in classical physics is given by the equation KE = (1/2)mv^2, where KE represents kinetic energy, m is the mass of the object, and v is its velocity. However, in special relativity, this equation is modified to take into account the relativistic increase in mass.

The relativistic kinetic energy equation is given by KE = (γ - 1)mc^2, where γ is the Lorentz factor and c is the speed of light. The Lorentz factor, γ, is calculated as γ = 1/√(1 - (v^2/c^2)), where v is the velocity of the particle.

When a particle is extremely relativistic, its velocity approaches the speed of light (v ≈ c), and the Lorentz factor becomes significantly large. As a result, the term (γ - 1) in the relativistic kinetic energy equation dominates, and the kinetic energy becomes much larger than the rest energy (mc^2) of the particle. This signifies that the particle's motion is predominantly governed by its kinetic energy, and the relativistic effects become significant.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

When an object is subjected to two opposing forces, we need to calculate the net force acting on the object. In this scenario, the object is pulled northward with a force of 10 N and southward with a force of 15 N.

The magnitude of the net force is determined by subtracting the smaller force from the larger one. In this case, the net force can be calculated as 15 N - 10 N = 5 N. So, the magnitude of the net force is 5 N.

The direction of the net force is determined by the direction of the larger force. In this case, the larger force is acting southward, so the direction of the net force is southward.

Therefore, the magnitude and direction of the net force acting on the object are 5 N southward. It is important to note that the magnitude of the net force is smaller than the individual forces acting on the object, which means that the object will not move in the direction of either of the forces acting on it.

In case the forces acting on the object were equal, the net force would be zero, and the object would not move. If the forces acting on the object were unbalanced, the net force would be the difference between the two forces, and the object would move in the direction of the net force.

TO KNOW MORE ABOUT two opposing forces CLICK THIS LINK -

brainly.com/question/14509042

#SPJ11

Answer:

true true true true true true true true true

No, that is incorrect. A positively charged object is an object that has an excess of protons. Electrons are negatively charged, so an object with an excess of them would be negatively charged.

Proton is a subatomic particle that is found in the nucleus of atoms. It has a positive electric charge and a mass that is approximately 1,836 times that of a hydrogen atom. Protons are the building blocks of all matter, as they combine with neutrons and electrons to form atoms. Protons can also interact with other particles and form subatomic particles, such as protons and antiprotons. Protons are a type of baryon and are made up of three quarks. Protons are among the most stable particles in nature and play an important role in the structure of the universe.

Static electricity is caused by an imbalance of electrons between two objects. When a positively charged object comes close to a negatively charged object, the electrons will be attracted to the positively charged object, resulting in a static electric charge.

To learn more about proton
https://brainly.com/question/30143614
#SPJ4

The  question is that the statement that is true is that the FM radio station broadcasts at a higher frequency than the AM radio station.

FM stands for frequency modulation, which means that the frequency of the radio wave carrying the signal changes in accordance with the audio signal being broadcast.

AM stands for amplitude modulation, which means that the amplitude (or height) of the radio wave carrying the signal changes in accordance with the audio signal being broadcast.
In terms of frequency, FM radio stations typically broadcast in the range of 88 to 108 MHz, while AM radio stations typically broadcast in the range of 540 to 1600 kHz. This means that the FM radio station in this scenario is broadcasting at a frequency of 108 MHz, which is significantly higher than the frequency of 1020 kHz for the AM radio station.
The statement that is true is that the FM radio station broadcasts at a higher frequency than the AM radio station, with FM radio stations typically broadcasting in the range of 88 to 108 MHz and AM radio stations typically broadcasting in the range of 540 to 1600 kHz.

For more information on frequency kindly visit to

https://brainly.com/question/15394477

#SPJ11

True. In a crash, the vehicle body, including the front and back, is designed to absorb energy through a process called "crumple zones."

These zones are engineered to crumple up during a collision, which helps absorb the energy and reduce the impact on the occupants.

Crumple zones are specific areas of a vehicle, typically located in the front and rear, that are designed to deform or collapse in a controlled manner upon impact. These zones are carefully engineered to absorb and dissipate the energy generated during a collision.

When a vehicle collides with an object or another vehicle, the crumple zones undergo controlled deformation, effectively lengthening the time it takes for the vehicle to come to a complete stop.

By increasing the duration of the impact, the force applied to the occupants is reduced, helping to mitigate the severity of injuries.

The deformation of the crumple zones absorbs a significant portion of the kinetic energy, converting it into work done on the vehicle structure. This energy absorption helps prevent it from being transmitted directly to the passenger compartment, where the occupants are seated.

The design of crumple zones varies depending on the vehicle make and model, but the primary goal is always to enhance occupant safety.

By sacrificing the integrity of the vehicle structure, crumple zones serve to protect the individuals inside by dissipating the crash energy over a larger area and extending the time of the collision.

To learn more about kinetic, refer below:

https://brainly.com/question/26472013

#SPJ11

The resonant frequency of the circuit just after the switch is opened is ωo = 250.86 rad/s.

When the switch is opened at time t=0, the current through inductor L1 is interrupted and the energy stored in it will start to discharge. The energy stored in an inductor is given by the formula E=1/2 * L * I^2, where E is the energy, L is the inductance, and I is the current.

Just before the switch is opened, the current through inductor L1 is equal to the current in the circuit, which can be found using Ohm's Law: V=IR. Thus, I=V/R1 = 12/289 = 0.0415 A.

Therefore, the energy stored in inductor L1 just after the switch is opened is:

E = 1/2 * L1 * I^2 = 1/2 * 0.394 * 0.0415^2 = 0.000034 J

So, UL1(0) = 0.000034 J

2) The resonant frequency of an RLC circuit is given by the formula:

ωo = 1/√(LC)

where ωo is the resonant frequency, L is the inductance, and C is the capacitance.

At t=0, the capacitor is fully charged and there is no current in the circuit. Thus, the initial conditions for the circuit are: i(0)=0 and vC(0)=12V.

The impedance of the circuit just after the switch is opened can be found using the formula:

Z = R1 + j(ωL2 - 1/(ωC))

where j is the imaginary unit, ω is the angular frequency, and L2 is the inductance of the second inductor.

To find the resonant frequency, we need to find the value of ω that makes the impedance Z purely resistive. This means that the imaginary part of Z must be equal to zero. So:

ωL2 - 1/(ωC) = 0

ωL2 = 1/(ωC)

ω^2 = 1/(L2C)

ωo = √(1/(L2C)) = √(1/((0.172)(91x10^-6))) = 250.86 rad/s

Therefore, the resonant frequency of the circuit just after the switch is opened is ωo = 250.86 rad/s.

Learn more about resonant frequency

brainly.com/question/13040523

#SPJ11

True. Displacement tonnage is the weight of a ship when it is empty, measured by the weight of the volume of water it displaces. This is usually expressed in long tons, which is 2,240 pounds.

Displacement is a vector quantity which measures the change in position of an object from its starting point. It is the shortest distance between two points and is a measure of how far an object has moved. This quantity is commonly used in physics to describe the motion of objects, as the direction of an object's displacement is in the same direction as its velocity. Displacement can also be interpreted as the difference between an object's initial and final position in a given period of time.

To learn more about Displacement
https://brainly.com/question/321442
#SPJ4

The work required to pump out a full cylinder of water with a height of 10 ft and radius of 2 ft over the top of the tank is 62,400 ft-lb.

To find the work required, we first need to calculate the volume of the cylinder, which can be done using the formula V = πr²h, where V is the volume, r is the radius, and h is the height.

In this case, V = π(2 ft)²(10 ft) = 40π ft³.
Next, we find the weight of the water in the cylinder by multiplying the volume by the density (62.4 lb/ft³).

The weight of the water is W = (40π ft³)(62.4 lb/ft³) = 2,496π lb.
Finally, we find the work required to pump out the water by multiplying the weight of the water by the height it must be pumped (10 ft).

The work required is: Work = (2,496π lb)(10 ft) = 24,960π ft-lb ≈ 62,400 ft-lb.

Summary: To pump out a full cylinder of water with a height of 10 ft and radius of 2 ft over the top of the tank, 62,400 ft-lb of work is required.

Learn more about volume click here:

https://brainly.com/question/463363

#SPJ11

If the first test of the simulation of the solar eclipse shows that the glasses are inadequate to safely view the sun, the most likely scenario would be that adjustments will need to be made to the glasses or a different type of protective eyewear will need to be used.

If the first test shows the glasses are inadequate for safely viewing a simulated solar eclipse, the most likely scenario is that the glasses do not provide sufficient protection for the eyes against the sun's harmful rays.

It is important to use proper eye protection during an eclipse to prevent eye damage. In this case, further improvements or adjustments to the glasses would be needed before they can be considered safe for use.

To know more about simulation, visit:

https://brainly.com/question/29478200

#SPJ11

The momentum before the collision should be equal to the momentum after the collision.

Before the collision, Daisy has a mass of 50 kg and is moving at 4.0 m/s. Her friend, with a mass of 70 kg, is standing still, so their combined initial momentum is (50 kg)(4.0 m/s) + (70 kg)(0 m/s) = 200 kg·m/s.

After the collision, they are holding each other, so we can treat them as a single object with a combined mass of 120 kg (50 kg + 70 kg). Let v be the speed at which they both move off together after the collision.

Using the conservation of momentum principle, we can write the equation:
Initial momentum = Final momentum
200 kg·m/s = (120 kg)(v)

Now, we can solve for v:
v = (200 kg·m/s) / (120 kg) = 1.67 m/s

So, when Daisy and her friend collide and hold each other, they both move off together at a speed of approximately 1.67 m/s.

TO KNOW MORE ABOUT  momentum CLICK THIS LINK

brainly.com/question/30677308

#SPJ11

The focal length of the contact lens needed for the left eye is +7.26 cm and for the right eye is +5.62 cm.

Lens is a transparent curved piece of glass or other transparent material used to form an image by refracting light. A lens has two principal planes, the optical axis and the principal planes, which are parallel to each other. Lenses are used for a variety of optical functions, such as magnifying objects, correcting optical defects, and focusing light.

The focal length of the contact lens is determined by the formula 1/f = 1/d + 1/s, where f is the focal length, d is the far point, and s is the near point. Since the far point for the left eye is 491 cm from the eye and the near point is infinity, the formula simplifies to 1/f = 1/491. Solving for f, we get +7.26 cm. We can use the same formula to determine the focal length of the contact lens for the right eye, where the far point is 642 cm and the near point is infinity. This yields a focal length of +5.62 cm.

Therefore, the focal length of the contact lens needed for the left eye is +7.26 cm and for the right eye is +5.62 cm.

To learn more about lens

https://brainly.com/question/28039799

#SPJ4

Molecules in a solid are held in nearly fixed positions by strong attractive forces. The correct answer is D.

This is what gives solids their rigid and definite shape, unlike liquids and gases which are able to flow and take the shape of their containers. In a solid, molecules vibrate around their fixed positions but do not move around like they do in liquids or gases.

Because of their fixed positions, molecules in a solid are not able to transfer heat to their neighbors by convection like they do in liquids or gases. Instead, heat is transferred through a process called conduction where the heat is transferred from one molecule to the next through direct contact.

It is also important to note that molecules in a solid do have internal energy, even though they are not moving around. This energy is in the form of their vibrations and the strength of the attractive forces holding them in place.

Overall, understanding the behavior of molecules in different states of matter is crucial for many fields of science, including chemistry and physics.

To know more about Molecules click here:

https://brainly.com/question/19922822

#SPJ11

You throw a basketball forward while standing on a skateboard. This causes:  a sudden acceleration of the skateboard forward, as the basketball is thrown in front of the skateboarder.

Acceleration is the rate of change of velocity of an object over time. It is a vector quantity and is measured in metres per second squared (m/s2). Acceleration is caused by a force acting upon an object, such as gravity, thrust, or drag. When an object is moving at a constant speed, it has constant velocity, but no acceleration. When an object speeds up, slows down, or changes direction, it has acceleration. Acceleration is also known as the rate of change of velocity, and can be calculated by the formula acceleration = change in velocity/time.  

The force of the thrown ball is transferred to the skateboard, causing it to move in the direction of the throw. Depending on the force of the throw, the skateboarder could lose control, resulting in the skateboarder falling off the skateboard.

To learn more about acceleration

https://brainly.com/question/460763

#SPJ4

The time it takes for the charge on the capacitor to decrease by 80% when the switch is opened is 6.63 microseconds.

What is the time it takes for a capacitor's charge to decrease by 80% when the switch is opened, given C = 0.040 μF and R= 300 Ω?

We can use the equation for the voltage on a capacitor as it discharges through a resistor:

V(t) = V0 * exp(-t / RC)

where V0 is the initial voltage on the capacitor, R is the resistance, C is the capacitance, t is time, and exp() is the exponential function.

To find the time it takes for the charge on the capacitor to decrease by 80%, we need to solve for t when V(t) = 0.2 * V0.

We can solve for t by plugging in the values supplied in the problem:

0.2 * V0 = V0 * exp(-t / RC)

0.2 = exp(-t / RC)

Taking the natural logarithm of both sides:

ln(0.2) = ln(exp(-t / RC))

ln(0.2) = -t / RC

t = -ln(0.2) * RC

Inputting the values for R and C from the problem:

t = -ln(0.2) * 300 * 0.00000004

t = 6.63 microseconds

Therefore, it takes approximately 6.63 microseconds for the charge on the capacitor to decrease by 80% when the switch is opened.

To learn more about capacitor, visit: https://brainly.com/question/21851402

#SPJ4

Answer: No if the frictional forces are internal to the system.

Explanation:

If the system has no external acting on it as the frictional forces are internal (frictional force produced by body one acting on on body two, and frictional force produced by body two acting on on body one) then the linear momentum is conserved.  

However if the frictional force is external to the two body system then the linear momentum of the two body system will not be conserved.

This double-dwell cam will move a follower from 0 to 2.5 in in 60 degrees, dwell for 120 degrees, fall 2.5 in in 30 degrees, and dwell for the remainder of the 4 second cycle, while minimizing accelerations.

Acceleration is the rate of change of velocity with respect to time. It is a vector quantity, meaning it has both magnitude and direction. Acceleration is the rate of change of velocity, or the rate at which an object's speed or direction is changing.

The cycloidal displacement function for this double-dwell cam is given by the following equation:
Position = A + B sin(θ) + C cos(θ) + D tan(θ)
Where A, B, C and D are constants determined by the desired motion profile.
For our double-dwell cam, the constants can be determined by solving the following four equations:
A = 0
B = 2.5 in/60°
C = 0
D = 0.6 in/s²
Therefore, the cycloidal displacement function for the double-dwell cam is given by:
Position = 2.5 in/60° sin(θ) + 0.6 in/s² tan(θ)
This double-dwell cam will move a follower from 0 to 2.5 in in 60 degrees, dwell for 120 degrees, fall 2.5 in in 30 degrees, and dwell for the remainder of the 4 second cycle, while minimizing accelerations.

To learn more about accelerations
https://brainly.com/question/460763
#SPJ4

The centroid of the quarter-circle wire is located at the point (2.356, 1).The centroid of a wire or any other object is the point where the weight of the object is evenly distributed. In this case, we need to find the centroid of a quarter-circle wire in the first quadrant.

To find the centroid of the wire, we can break it down into smaller parts and find the centroid of each part. Since the wire has uniform density, each part will have the same weight.

Let's divide the quarter-circle wire into smaller parts by drawing vertical lines from the center of the circle to the edge of the wire. These lines will divide the wire into a series of rectangular strips. The centroid of each rectangular strip is located at the center of the strip.

Since the wire is symmetric, the centroid of each rectangular strip will lie on the line y = 1. The distance from the center of each rectangular strip to the y-axis is equal to the width of the strip. The width of each strip is equal to the radius of the circle multiplied by the angle of the strip in radians.

Using this information, we can integrate over the angle of each rectangular strip to find the total weight and the x-coordinate of the centroid. By symmetry, the y-coordinate of the centroid is 1.

After performing the integration, we find that the x-coordinate of the centroid is (8/3)π/4 or approximately 2.356.

To know more about circle refer to

https://brainly.com/question/15424530

#SPJ11

Based on the scenario described, if you see the two flashes of light from the two explosions at exactly the same instant, then according to your lab partner, event 1 (firecracker A explodes) and event 2 (firecracker B explodes) also occur at the same time.

This is because your lab partner is on the other side of Firecracker A and can observe the explosion at the same time as you observe the explosion of Firecracker B.

This is an example of the relativity of simultaneity, which means that the timing of events is relative to the observer's frame of reference. Since you and your lab partner are in different positions relative to the explosions, you will observe the timing of the events differently. However, according to the measurements made by your lab partner, who is located on the opposite side of Firecracker A, event 1 and event 2 occur at the same time.

Learn more about “explosions “ visit here;

https://brainly.com/question/8393707

#SPJ4

The power dissipated by a resistor is given by the formula P = V^2/R, where V is the voltage across the resistor and R is its resistance.

For the resistor with resistance R, the power dissipated is given as P.

For the resistor with resistance 4R, the voltage across it will be the same as the voltage across the R resistor (since they are connected in the same circuit), but the resistance is four times greater.

Using the formula for power, we get:

P = V^2/R

P' = V^2/(4R)

To compare the powers dissipated by the two resistors, we can simplify the expressions by eliminating the voltage V:

P/P' = (V^2/R) / (V^2/(4R))

P/P' = 4

Therefore, the power dissipated by the 4R resistor is four times the power dissipated by the R resistor.

Answer: A) 4P

TO KNOW MORE ABOUT Two resistors CLICK THIS LINK -

brainly.com/question/30666945

#SPJ11

The energy required to change the sample of tin from a solid at 56.90C to a liquid at 256.11C is 200.89 kJ.

To calculate the energy required to change the 799g sample of tin from a solid at 56.90C to a liquid at 256.11C,  consider the different stages of the process:
Heating the solid tin from 56.90C to its melting point of 231.93C:
Q1 = m x Cs x ΔT = 799g x 0.2270 J/g*C x (231.93C - 56.90C) = 120,355.89 J or 120.36 kJ
Melting the solid tin at 231.93C:
Q2 = m x DHFusion = 799g x 60.425 kJ/g = 48,263.58 J or 48.26 kJ
Heating the liquid tin from its melting point to 256.11C:
Q3 = m x Cl x ΔT = 799g x 0.7264 J/g*C x (256.11C - 231.93C) = 18,477.86 J or 18.48 kJ
Vaporizing the liquid tin at 256.11C:
Q4 = m x DHvap = 799g x 17.2643 kJ/g = 13,795.05 J or 13.80 kJ
The total energy required is the sum of Q1, Q2, Q3, and Q4:
Qtotal = Q1 + Q2 + Q3 + Q4 = 200,892.38 J or 200.89 kJ

To learn more about energy, click here:
https://brainly.com/question/1932868

#SPJ11

When compared to lower mass stars, higher mass stars go out silently with a bang.

Mass is the physical property of a physical body that is a measure of its inertia and is measured in kilograms (kg). It is the amount of matter contained in an object, and is different from weight, which is a measure of the force of gravity on an object. Mass is an intrinsic property of an object, meaning it is not affected by outside forces, such as gravity. Mass is related to the density of an object, which is a measure of how tightly packed the particles that make up the object are.

Therefore, the correct option is A.
To learn more about mass
https://brainly.com/question/86444
#SPJ4

If the resistance of a circuit were tripled, then the current through the circuit would be one-third as much.

What is resistance?

The obstruction to current flow in an electrical circuit is measured by resistance. The ratio of the applied voltage to the electric current passing through it is another definition for it.

Any change in resistance will cause the current to change in the opposite or inverse direction. Therefore, if the resistance is doubled or tripled, the current will be reduced to half or third of its initial value.

If all other elements remain constant, the current drops as the resistance rises. Electrical conductors, such as metals, are substances with low resistance that make it simple for electricity to move through them.

V ⇒ IR

I ⇒ V/R

If R is 3 times increased

I ⇒ V/3R

To learn more about resistance use:

https://brainly.com/question/28135236

#SPJ4

Cooked quinoa can last in the refrigerator for up to three to five days.

However, it is important to properly store the quinoa in an airtight container or resealable bag to keep it fresh for as long as possible. Additionally, if you notice any unusual odor or appearance, it is best to discard the quinoa.

Cooked quinoa lasts approximately 3 to 5 days in the refrigerator. When properly stored in an airtight container, cooked quinoa can be safely kept in the refrigerator for 3 to 5 days. This helps preserve its freshness and prevents bacterial growth.

To prolong the shelf life of cooked quinoa, it's essential to cool it completely before transferring it into an airtight container or resealable plastic bag. Storing it in the refrigerator at a temperature of 40°F (4°C) or below will help maintain its quality and prevent spoilage during this 3 to 5 day period.

To know more about refrigerator, visit:

https://brainly.com/question/26708112

#SPJ11

A single-turn wire loop is 3.8 cm in diameter and carries a 620 mA current. A. The magnetic field strength at the center of the loop is 1.03 x [tex]10^{-4}[/tex] T. B. The magnetic field strength on the loop axis, 25 cm from the center, is 19.6nT.

A. To find the magnetic field strength at the center of the loop, we can use the formula

B = μ0I/2R

Where μ0 is the permeability of free space, I is the current, and R is the radius of the loop.

We are given that the loop has a diameter of 3.8 cm, so its radius is

R = 3.8 cm / 2 = 1.9 cm = 0.019 m

We are also given that the current in the loop is

I = 620 mA = 0.62 A

And we know that the permeability of free space is

μ0 = 4π x [tex]10^{-7}[/tex] T m/A

Substituting these values into the formula, we get

B = μ0I/2R = (4π  x [tex]10^{-7}[/tex] T m/A )(0.62 A)/(2 x 0.019 m) = 1.03 x [tex]10^{-4}[/tex] T

Therefore, the magnetic field strength at the center of the loop is 1.03 x [tex]10^{-4}[/tex] T.

B. To find the magnetic field strength on the loop axis, 25 cm from the center, we can use the formula

B = μ0I/2r

Where r is the distance from the center of the loop to the point on the axis.

We are given that r = 25 cm = 0.25 m.

Substituting the other values from part A, we get

B = μ0I/2r = (4π x [tex]10^{-7}[/tex] T m/A )(0.62 A)/(2 x 0.25 m) = 1.96 x [tex]10^{-8}[/tex]T

Therefore, the magnetic field strength on the loop axis, 25 cm from the center, is 19.6nT.

To know more about current here

https://brainly.com/question/15059384

#SPJ4