Which of the following describes the compound SOCl 2

? Choose all answers that apply. If the compound dissolved in water, it would be expected to be a strong electrolyte. The compound would be expected to have a relatively high melting point. The compound would be expected to have a relatively low melting point. The compound is molecular. The compound is ionic.

Answers

Answer 1

SOCl₂ is a molecular compound composed of nonmetals, exhibiting polar covalent bonds. It has a relatively high melting point due to dipole-dipole interactions and London dispersion forces, but it is not an ionic compound.

The compound SOCl₂ can be described as follows:

1. The compound is molecular: SOCl₂ is a covalent compound composed of nonmetals (sulfur, oxygen, and chlorine). It consists of discrete molecules held together by covalent bonds.

2. The compound would be expected to have a relatively high melting point: SOCl₂ is a polar molecule with significant dipole-dipole interactions and London dispersion forces. These intermolecular forces contribute to a relatively high melting point.

3. The compound is not ionic: Ionic compounds are formed by the complete transfer of electrons between a metal and a nonmetal. SOCl₂ does not involve the transfer of electrons between elements, so it is not an ionic compound.

Therefore, the correct descriptions for SOCl₂ are:

The compound is molecular.The compound would be expected to have a relatively high melting point.

To know more about the polar covalent bonds refer here,

https://brainly.com/question/28295508#

#SPJ11


Related Questions

The normal temperature of a chickadee is 105.8 ∘
F. What is that temperature on the Celsius scale?

Answers

Celsius, often denoted by the symbol °C, is a unit of temperature in the metric system. It is commonly used in many countries as the standard unit for temperature measurement, especially in scientific and everyday contexts.

The normal temperature of a chickadee is given in Fahrenheit (°F) as 105.8°F. To convert this temperature to Celsius (°C), you can use the following formula:

°C = (°F - 32) * 5/9

Now let's substitute the given Fahrenheit temperature into the formula:

°C = (105.8 - 32) * 5/9

Simplifying the equation:

°C = (73.8) * 5/9

°C = 40.88

Therefore, the temperature of a chickadee, which is normally 105.8°F, is approximately 40.88°C.

To further clarify, on the Celsius scale, 0°C is the freezing point of water, while 100°C is the boiling point of water at sea level. So, a chickadee's normal temperature of 40.88°C is higher than the average human body temperature of 37°C, but it is well within the normal range for a bird.

In conclusion, the temperature of a chickadee, given as 105.8°F, is approximately 40.88°C.

To know more about Celsius visit:

https://brainly.com/question/1373930

#SPJ11

A solution contains 0.0756M potassium cyanide and 0.184M hydrocyanic acid (Ka​=4.00×10−10) The pH of this solution is

Answers

The pH of this solution is 5.50.

A solution contains 0.0756 M potassium cyanide and 0.184 M hydrocyanic acid (Ka​=4.00×10−10).The pH of this solution is calculated as follows:

1: Write the chemical equation of the dissociation of hydrocyanic acid in water: Hcn(aq) + H2O(l) ⇌ H3O+(aq) + Cn−(aq)Ka = ([H3O+][Cn−])/[Hcn]

where Ka​=4.00×10−10

2: Define the values for the given concentrations:[Hcn] = 0.184 M[H3O+] = [Cn−] = x

3: Plug in the given values into the Ka expression and solve for x:

Ka = ([H3O+][Cn−])/[Hcn]4.00 × 10⁻¹⁰ = (x × x) / 0.184 x = 3.16 × 10⁻⁶

4: Calculate the pH of the solution:

pH = -log[H3O+]pH = -log(3.16 × 10⁻⁶)

pH = 5.50

To know more about pH  click on below link :

https://brainly.com/question/15289741#

#SPJ11

Given
the initial temperature of the solution and Calorimeter: was 21.3g
the final temperature of the solution and Calorimeter: was 31g
the mass of water: 50g
the mass of NaOH: 2g
the total mass of the solution: 52
1. calculate the heat content of the solution (q soln)
2. calculate the total heat content of the calorimeter (q cal)
3. calculate the heat of dissolution of q diss of NaOH
4. What are the moles of NaOH dissolved?
5. calculate the molar enthalpy for the heat of dissolution.

Answers

Determining various quantities related to the heat content and heat of dissolution of a NaOH solution, the provided formulas and information can be utilized. .

To calculate the heat content of the solution (q_soln), total heat content of the calorimeter (q_cal), heat of dissolution (q_diss) of NaOH, moles of NaOH dissolved, and the molar enthalpy for the heat of dissolution, we can use the following formulas and information:

Given:

Initial temperature of solution and calorimeter (T_initial) = 21.3 °C

Final temperature of solution and calorimeter (T_final) = 31 °C

Mass of water (m_water) = 50 g

Mass of NaOH (m_NaOH) = 2 g

Total mass of the solution (m_total) = 52 g

Specific heat capacity of water (C_water) = 4.18 J/g°C

Calculate the heat content of the solution (q_soln):

q_soln = m_water * C_water * ΔT

ΔT = T_final - T_initial

q_soln = 50 g * 4.18 J/g°C * (31 °C - 21.3 °C)

Calculate the total heat content of the calorimeter (q_cal):

q_cal = m_total * C_water * ΔT

q_cal = 52 g * 4.18 J/g°C * (31 °C - 21.3 °C)

Calculate the heat of dissolution (q_diss) of NaOH:

q_diss = q_cal - q_soln

Calculate the moles of NaOH dissolved:

moles_NaOH = m_NaOH / molar mass of NaOH

Calculate the molar enthalpy for the heat of dissolution:

molar_enthalpy = q_diss / moles_NaOH

Note: The specific heat capacity (C) used here is for water. The molar mass of NaOH is needed to calculate the moles of NaOH dissolved.

Make sure to substitute the appropriate values and units into the equations to obtain the numerical values for each calculation.

More on heat content: https://brainly.com/question/3397797

#SPJ11

The hydrides of group 5A are NH3NH3, PH3PH3, AsH3AsH3, and SbH3SbH3. Arrange them from highest to lowest boiling point.
Rank the molecules from highest to lowest boiling point. To rank items as equivalent, overlap them. The hydrides of group 5A are NH3NH3, PH3PH3, AsH3AsH3, and SbH3SbH3. Arrange them from highest to lowest boiling point.
Rank the molecules from highest to lowest boiling point. To rank items as equivalent, overlap them.

Answers

The hydrides of Group 5A, arranged from highest to lowest boiling point, are SbH₃, AsH₃, NH₃, and PH₃.

The boiling point of a compound depends on its intermolecular forces, which are influenced by molecular size and polarity. In this case, the boiling points increase as we move down the group due to an increase in molecular size and London dispersion forces.

SbH₃ has the highest boiling point because antimony (Sb) is the largest atom in this group, resulting in stronger London dispersion forces. AsH₃ comes next since it is smaller than SbH₃ but larger than NH₃ and PH₃. NH₃ follows due to its smaller size and stronger hydrogen bonding, which is more significant than the London dispersion forces in PH₃.

PH₃ has the lowest boiling point since phosphorus (P) is the smallest atom in this group. Its smaller size results in weaker intermolecular forces, including London dispersion forces and hydrogen bonding, compared to the other hydrides in Group 5A.

learn more about Boiling point here:

https://brainly.com/question/2153588

#SPJ11

Write a net ionic equation to show that ethylamine, C2​H5​NH2​ behaves as a Bronsted-Lowry base in water. (For organic molecules enter elements in order they are given in the question.) Write a net ionic equation to show that benzoic acid, C6​H5​COOH, behaves as a Bronsted-Lowry ​ acid in water.

Answers

The net ionic equation for the behavior of ethylamine (C₂H₅NH₂) as a Bronsted-Lowry base in water is:

C₂H₅NH₂ + H₂O → C₂H₅NH₃⁺ + OH⁻

The net ionic equation for the behavior of benzoic acid (C₆H₅COOH) as a Bronsted-Lowry acid in water is:

C₆H₅COOH + H₂O → C₆H₅COO⁻ + H₃O⁺

In water, ethylamine (C₂H₅NH₂) can act as a Bronsted-Lowry base by accepting a proton (H⁺) from water. The reaction can be represented by the net ionic equation: C₂H₅NH₂ + H₂O → C₂H₅NH₃⁺ + OH⁻. In this equation, ethylamine (C₂H₅NH₂) accepts a proton from water (H₂O) to form the ethylammonium ion (C₂H₅NH₃⁺) and hydroxide ion (OH⁻). This shows the base behavior of ethylamine as it accepts a proton.

On the other hand, benzoic acid (C₆H₅COOH) can act as a Bronsted-Lowry acid in water by donating a proton (H⁺) to water. The reaction can be represented by the net ionic equation: C₆H₅COOH + H₂O → C₆H₅COO⁻ + H₃O⁺.

In this equation, benzoic acid (C₆H₅COOH) donates a proton to water (H₂O) to form the benzoate ion (C₆H₅COO⁻) and hydronium ion (H₃O⁺). This demonstrates the acid behavior of benzoic acid as it donates a proton.

To know more about Bronsted-Lowry acid refer here:

https://brainly.com/question/29317749#

#SPJ11

In response to a decreasing pH, the bicarbonate buffer system causes an increase in: Free hydrogen ions (H+) Carbonic acid (H2​CO3​) Bicarbonate ions (HCO3−​) Phosphoric acid (H2​PO4​)

Answers

The bicarbonate buffer system increases carbonic acid ([tex]H_{2} CO_{3}[/tex] ) and free hydrogen ions (H+) in response to a drop in pH.

In response to a decreasing pH, the bicarbonate buffer system causes an increase in the concentration of carbonic acid ([tex]H_{2} CO_{3}[/tex] ) and free hydrogen ions (H+).

The bicarbonate buffer system is an important physiological buffering system in the human body, responsible for maintaining the pH of the blood within a narrow range. It consists of the equilibrium between carbonic acid ([tex]H_{2} CO_{3}[/tex] ) and bicarbonate ions ([tex]HCO_{3-}[/tex]):

[tex]H_{2} CO_{3}[/tex] ⇌ H+ + [tex]HCO_{3-}[/tex]

When the pH decreases (becomes more acidic), the equilibrium shifts to the left, resulting in an increase in the concentration of carbonic acid ([tex]H_{2} CO_{3}[/tex] ) and free hydrogen ions (H+). This helps to neutralize the excess acid and maintain the pH balance.

Therefore, in response to a decreasing pH, the bicarbonate buffer system causes an increase in carbonic acid ([tex]H_{2} CO_{3}[/tex] ) and free hydrogen ions (H+).

To know more about decreasing pH refer here:

https://brainly.com/question/6355059?

#SPJ11

If 1.0 × 10-3 mol of HCl gas is dissolved in water to
make 0.10 L of solution, calculate the pH and pOH of the aqueous
hydrochloric acid solution. (4 mark)

Answers

The pH of the hydrochloric acid solution is 2 and the pOH is 12.

To calculate the pH and pOH of the hydrochloric acid solution, we need to determine the concentration of H+ ions in the solution. Since 1.0 × 10-3 mol of HCl is dissolved in 0.10 L of solution, the concentration of H+ ions is 1.0 × 10-3 mol/0.10 L = 0.01 M.

The pH can be calculated using the formula pH = -log[H+], where [H+] is the concentration of H+ ions. In this case, pH = -log(0.01) = 2.

pH + pOH = 14, we can calculate the pOH as pOH = 14 - pH = 14 - 2 = 12.

To know more about pH refer here

https://brainly.com/question/2288405#

#SPJ11

Calculate mol % of butyl acetate in the mixture. Volume = 28 mL
Volume % = 60% Molar mass = 116.158 Density= 0.882 g/mL

Answers

The mol % (mole percent) of butyl acetate in the mixture is approximately 48.87%.

To calculate the mol % of butyl acetate in the mixture, we need to determine the number of moles of butyl acetate and the total number of moles in the mixture.

First, we can calculate the mass of butyl acetate using its volume and density:

Mass of butyl acetate = Volume × Density

                    = 28 mL × 0.882 g/mL

                    = 24.696 g

Next, we can calculate the number of moles of butyl acetate using its mass and molar mass:

Moles of butyl acetate = Mass / Molar mass

                     = 24.696 g / 116.158 g/mol

                     ≈ 0.2127 mol

Now, to calculate the total number of moles in the mixture, we can use the volume percentage and the density:

Volume of mixture = 28 mL

Density of mixture = 0.882 g/mL

Mass of mixture = Volume of mixture × Density of mixture

               = 28 mL × 0.882 g/mL

               = 24.696 g

Moles of mixture = Mass of mixture / Molar mass

                = 24.696 g / 116.158 g/mol

                ≈ 0.2127 mol

Finally, we can calculate the mol % of butyl acetate in the mixture:

Mol % of butyl acetate = (Moles of butyl acetate / Moles of mixture) × 100

                      = (0.2127 mol / 0.2127 mol) × 100

                      ≈ 48.87%

Therefore, the mol % of butyl acetate in the mixture is approximately 48.87%.



To learn more about mixture click here: brainly.com/question/17369145

#SPJ11

Homework Help:
what
volume of 0.800 M sodium phosphate solution (in mL) must be added
to a solution containing 25.0g of CuSO4 to precipitate all of
copper ions?

Answers

Approximately 98 mL of the 0.800 M sodium phosphate solution must be added to the solution containing 25.0 g of CuSO₄ to precipitate all the copper ions.

To determine the volume of 0.800 M sodium phosphate solution needed to precipitate all the copper ions from a solution containing 25.0 g of CuSO₄, we need to consider the balanced chemical equation for the precipitation reaction and perform stoichiometric calculations.

The balanced equation for the precipitation reaction between copper sulfate (CuSO₄) and sodium phosphate (Na₃PO₄) is:

3CuSO₄ + 2Na₃PO₄ -> Cu₃(PO₄)₂ + 3Na₂SO₄

From the balanced equation, we can see that the molar ratio between CuSO₄ and Na₃PO₄ is 3:2. This means that 3 moles of CuSO₄ react with 2 moles of Na₃PO₄.

First, we need to calculate the number of moles of CuSO₄:

Molar mass of CuSO₄ = 63.55 g/mol (atomic mass of Cu) + 32.07 g/mol (atomic mass of S) + 4 * 16.00 g/mol (4 times the atomic mass of O) = 159.61 g/mol

Moles of CuSO₄ = Mass of CuSO₄ / Molar mass of CuSO₄

Moles of CuSO₄ = 25.0 g / 159.61 g/mol

Moles of CuSO₄ ≈ 0.1568 mol

According to the stoichiometry of the balanced equation, 3 moles of CuSO4 react with 2 moles of Na3PO4. Therefore, we need half of the moles of CuSO4 for the reaction:

Moles of Na₃PO₄ = 1/2 * Moles of CuSO₄

Moles of Na₃PO₄ = 1/2 * 0.1568 mol

Moles of Na₃PO₄ ≈ 0.0784 mol

Now we can calculate the volume of the 0.800 M Na₃PO₄ solution using its molarity and the number of moles:

Volume (in L) = Moles of Na₃PO₄ / Molarity of Na₃PO₄

Volume (in L) = 0.0784 mol / 0.800 mol/L

Volume (in L) ≈ 0.098 L

Since the question asks for the volume in milliliters (mL), we can convert liters to milliliters:

Volume (in mL) = 0.098 L * 1000 mL/L

Volume (in mL) ≈ 98 mL

Therefore, approximately 98 mL of the 0.800 M sodium phosphate solution must be added to the solution containing 25.0 g of CuSO₄ to precipitate all the copper ions.

To know more about precipitation, refer here:

https://brainly.com/question/31193177#

#SPJ11

Ordinary table sugar. Spell out the full name of the compound. 

Answers

The ordinary table sugar is known as sucrose. Its full chemical name is α-D-glucopyranosyl-(1→2)-β-D-fructofuranoside.

Sucrose is a disaccharide composed of glucose and fructose units joined together by a glycosidic bond. It is the most common type of sugar found in many fruits, vegetables, and sugarcane.

Sucrose is widely used as a sweetener in food and beverages due to its pleasant taste and solubility.

When consumed, enzymes in the digestive system break down sucrose into its component sugars, glucose and fructose, which are then absorbed into the bloodstream to provide energy for the body's cells.

To know more about sucrose, refer here:

https://brainly.com/question/3850162#

#SPJ11

2) What type of intermolecular force must be overcome in converting each of the following from a liquid to a gas? [4] a) Liquid oxygen b) Methyl iodide c) Ammonia d) Ethanol

Answers

(a) Liquid oxygen: The intermolecular force that must be overcome in converting liquid oxygen to a gas is London dispersion forces.

(b) Methyl iodide: The intermolecular force that must be overcome in converting methyl iodide to a gas is dipole-dipole interactions.

(c) Ammonia: The intermolecular force that must be overcome in converting ammonia to a gas is hydrogen bonding.

(d) Ethanol: The intermolecular forces that must be overcome in converting ethanol to a gas are hydrogen bonding and London dispersion forces.

(a) Liquid oxygen consists of oxygen molecules (O₂) held together by strong covalent bonds. In the liquid state, oxygen molecules are attracted to each other through London dispersion forces, which are a result of temporary fluctuations in electron distribution. To convert liquid oxygen to a gas, these London dispersion forces must be overcome, allowing the oxygen molecules to separate and move freely as a gas.

(b) Methyl iodide (CH₃I) is a polar molecule due to the electronegativity difference between carbon and iodine. In the liquid state, methyl iodide molecules are held together by dipole-dipole interactions, which occur between the partially positive carbon atom and the partially negative iodine atom. To convert methyl iodide to a gas, these dipole-dipole interactions must be overcome, allowing the molecules to separate and move independently.

(c) Ammonia (NH₃) is a polar molecule with a lone pair of electrons on the nitrogen atom. In the liquid state, ammonia molecules form hydrogen bonds with neighboring ammonia molecules. Hydrogen bonding occurs when the hydrogen atom of one ammonia molecule is attracted to the lone pair of electrons on another ammonia molecule. To convert ammonia to a gas, the hydrogen bonds must be broken, allowing the molecules to move freely.

(d) Ethanol (C₂H₅OH) is a polar molecule with a hydroxyl group (-OH) that can participate in hydrogen bonding. In the liquid state, ethanol molecules form hydrogen bonds with each other. Additionally, ethanol molecules experience London dispersion forces, which arise from temporary fluctuations in electron distribution. To convert ethanol to a gas, both the hydrogen bonds and London dispersion forces must be overcome, enabling the molecules to separate and move as a gas.

To know more about intermolecular force refer here:

https://brainly.com/question/31797315#

#SPJ11

Calculate the volume, in milliliters, of a 0.380 M KOH solution that should be added to 4.250 g of HEPES (MW = 238.306 g/mol, pKa = 7.56 ) to give a pH of 7.20.

Answers

Answer: 29.3 ml

Explanation: HEPES is a zwitterion. That is, it has both the acid and base components in the same molecule. However, we can write its formula as HA. Then the equation for the equilibrium is

MM:  238.306

           HA + H₂O ⇌ H₃O⁺ + A⁻; pKₐ = 7.56

m/g:    6.00

1. Calculate the moles of HEPES

2. Calculate the concentration ratio.

We can use the Henderson-Hasselbalch equation.

The acid and its conjugate base are in the same solution, so the concentration ratio is the same as the mole ratio.

3. Calculate the moles of HA and A⁻

4. Calculate the moles of KOH

We are preparing the buffer by adding KOH to convert HA to A⁻. The equation is

HA + OH⁻ ⟶ A⁻ + H₂O

The molar ratio is 1 mol A⁻:1 mol OH⁻, so we must use 0.009 742 mol of KOH.

5. Calculate the volume of KOH

Consider a solution of nitrous acid, HNO 2

. a) What is the conjugate base of HNO 2

? b) Write the chemical equation that describes the reaction/equilibrium of the weak acid HNO 2

with water c) Write the expression for the K a

OfHClO 3

in terms of the concentrations of the relevant species.

Answers

a) Conjugate base of HNO₂: NO₂⁻.

b) HNO₂ + H₂O ⇌ H₃O⁺ + NO₂⁻.

c) Ka expression of HNO₂: Ka = [H₃O⁺][NO₂⁻] / [HNO₂].

a) The conjugate base of nitrous acid (HNO₂) is nitrite ion (NO₂⁻).

b) The chemical equation that describes the reaction/equilibrium of the weak acid nitrous acid (HNO₂) with water is:

HNO₂ + H₂O ⇌ H₃O⁺ + NO₂⁻

In this equation, HNO₂ acts as the weak acid, donating a proton (H⁺) to water and forming hydronium ion (H₃O⁺) and nitrite ion (NO₂⁻).

c) The expression for the Ka (acid dissociation constant) of HNO₂ can be written as:

Ka = [H₃O⁺][NO₂⁻] / [HNO₂]

In this expression, [H₃O⁺] represents the concentration of hydronium ion, [NO₂⁻] represents the concentration of nitrite ion, and [HNO₂] represents the concentration of nitrous acid. Ka is a measure of the strength of the acid, indicating the extent to which it dissociates in water. A higher Ka value corresponds to a stronger acid, while a lower Ka value indicates a weaker acid.

learn more about Acid dissociation constant here:;

https://brainly.com/question/30930515

#SPJ11

You run a pH-dependent reaction with a protic compound. Kobs vS pH reveals a sigmoidal curvature. Sketch the curve and assign distinct points of your choice.

Answers

To sketch the curve of the pH-dependent reaction with a protic compound, you would need to plot the Kobs values on the y-axis and the pH values on the x-axis. The curve would show a sigmoidal shape, indicating a change in the reaction rate with varying pH levels.



Distinct points on the curve could include:
1. The lowest point (point A): This represents the lowest Kobs value, indicating the slowest reaction rate. It would correspond to the pH value where the reaction is least favorable.
2. The highest point (point B): This represents the highest Kobs value, indicating the fastest reaction rate. It would correspond to the pH value where the reaction is most favorable.
3. The inflection point (point C): This represents the pH value where the curve transitions from being concave up to concave down. It would correspond to the pH value where the reaction rate undergoes a significant change.

Keep in mind that the exact positions of these points would depend on the specific reaction and compound being used.

To know more about reaction visit-

https://brainly.com/question/16737295

#SPJ11

Does pH measure the concentration of the H+ ions or the acidity/basicity of a solution?

Answers

Answer:

Conc. of H+ IONS

Explanation:

A copper concentration cell is set up at 25 ∘
C where the concentration at the cathode is 3.75MCu 2+
. If the cell potential of the concentration cell is 65.2mV, what is the concentration of copper (II) ions in the anode? Report your answer using three significant figures. Type your answer...

Answers

To determine the concentration of copper (II) ions in the anode of the concentration cell is [Cu²⁺]anode = Q * 3.75 by using Nernst equation.

The Nernst equation is given by:

Ecell = E°cell - (0.0592/n) * log(Q)

Where:

- Ecell is the cell potential

- E°cell is the standard cell potential (at standard conditions)

- n is the number of electrons transferred in the cell reaction

- Q is the reaction quotient (ratio of products to reactants concentrations)

Since it's a concentration cell, the standard cell potential (E°cell) is 0.

The reaction occurring in the cell is the oxidation and reduction of copper (II) ions (Cu²⁺) on both the cathode and anode sides.

The half-reaction at the cathode (reduction):

Cu²⁺(aq) + 2e⁻ → Cu(s)

The half-reaction at the anode (oxidation):

Cu(s) → Cu²⁺(aq) + 2e⁻

Since the concentrations at the cathode and anode are given, we can calculate the reaction quotient (Q) as:

Q = [Cu²⁺]anode / [Cu²⁺]cathode

Given:

- E°cell = 0 (since it's a concentration cell)

- Ecell = 65.2 mV = 0.0652 V

- [Cu²⁺]cathode = 3.75 M

Using the Nernst equation, we can rearrange and solve for [Cu²⁺]anode:

0.0652 = 0 - (0.0592/2) * log(Q)

-0.0652 = -0.0296 * log(Q)

Dividing both sides by -0.0296:

log(Q) = -0.0652 / -0.0296

Taking the antilog of both sides to solve for Q:

Q = 10^(-0.0652 / -0.0296)

Now that we have the value of Q, we can substitute it into the Q expression:

Q = [Cu²⁺]anode / [Cu²⁺]cathode

Substituting [Cu²⁺]cathode = 3.75 M, we can solve for [Cu²⁺]anode:

[Cu²⁺]anode = Q * 3.75

Calculating the value of [Cu²⁺]anode will give us the concentration of copper (II) ions in the anode.

learn more about cathode :

https://brainly.com/question/32063482

#SPJ4

You have \( 2.2 \mathrm{~mol} \mathrm{Xe} \) and \( 3.6 \mathrm{~mol} \mathrm{~F}_{2} \), but when you carry out the reaction you end up with only \( 0.25 \mathrm{~mol} \mathrm{XeF}_{4} \). What is th

Answers

There are 1.95 mol of Xe and 3.1 mol of F2 unreacted.

The balanced chemical equation for the reaction between Xe and F2 to produce XeF4 is given by:

[tex]Xe + 2F2 → XeF4[/tex]

Moles of Xe available = 2.2 mol

Moles of F2 available = 3.6 mol

Moles of XeF4 produced = 0.25 mol

From the balanced chemical equation, one mole of Xe reacts with two moles of F2 to produce one mole of XeF4.

From the mole ratio in the balanced chemical equation, the limiting reactant is Xe. The number of moles of XeF4 produced is determined by the limiting reactant, which is Xe. Therefore, the moles of Xe that react are equal to the number of moles of XeF4 produced.

Hence, the number of moles of Xe that reacts = 0.25 mol

The number of moles of Xe remaining unreacted = 2.2 - 0.25 = 1.95 mol

Thus, the number of moles of F2 that reacts with Xe = 2 × 0.25 = 0.5 mol

The number of moles of F2 remaining unreacted = 3.6 - 0.5 = 3.1 mol

Therefore, 1.95 mol of Xe and 3.1 mol of F2 unreacted.

To learn more about equation, refer below:

https://brainly.com/question/29538993

#SPJ11

which are the two major greenhouse gases?

A) CO2 and CH4
B) CH2O and CO
C) NO and NO2
D) O2 and H2O

correct answer is A)

Answers

The answer to this question is A:)

What is the original mass of C−14 in a sample if 10.00mg of it remains after 20,000 years? The half- life of C-14 is 5730 years.

Answers

The original mass of C¹⁴ in the sample is approximately 40.00 mg.

The half-life of C¹⁴ is 5730 years, which means that after 5730 years, half of the initial amount of C¹⁴ will decay. In this case, the time span is 20,000 years, which is approximately 3.49 half-lives (20000 ÷ 5730 ≈ 3.49).

To determine the original mass of C¹⁴, we can use the exponential decay formula:

Final mass = Initial mass × (1/2)^(number of half-lives)

Let's denote the original mass of C¹⁴ as M:

10.00 mg = M × (1/2)³.⁴⁉

To solve for M, we need to isolate it. Taking the cube root of both sides:

∛(10.00 mg) = M × (1/2)3.49

M ≈ 40.00 mg

learn more about Half- life here:

https://brainly.com/question/24710827

#SPJ11

What are the mechanisms that a cell uses to protect against the production of oxygen radicals?

Answers

When only one electron is added to O2, a superoxide ion is created.

The body uses a number of enzymes to neutralize oxygen radicals, usually by converting them into water and oxygen. Superoxide dismutase, catalase, and glutathione peroxidase are a few instances. Superoxide dismutase breaks down two superoxide ions into molecular oxygen and hydrogen peroxide.

Hydrogen peroxide is further broken down by catalase into water and oxygen. In addition to further degrading hydrogen peroxide, glutathione peroxidase can convert peroxides into alcohol. The "antioxidants" vitamin E and vitamin C, which can shield lipid membranes and lower radicals, are examples of non-enzyme protection.

Carcinogens are a wide range of substances and radiation that can cause or hasten the development of cancer in a person.

To know more about oxygen radical:

https://brainly.com/question/32112121

#SPJ4

1) Why do you mark the chromatography paper with pencil, not pen? 2) Explain why the chromatography spot should be small. 3) What two properties of the metal ions on the chromatogram allow us to determine what the compounds are? 4) If you didn't read the instructions and put larger volume of solvent into the developing tank. The liquid level was above the baseline. Will you get valid data? 5) Why do you mark the solvent front immediately upon removal of the filter paper? 6) In the mix used in today's experiment, rank the ions for their attraction to the paper and to the acetone. 7) Two extreme values for Rf are 1 and 0 . Explain what each value means in terms of the compound's affinity for the paper versus the eluting solution.

Answers

An Rf value of 1 indicates that the compound is non-polar, while an Rf value of 0 means that the compound is polar.

It is important that the chromatography spot is small because if it's too large, the separated components will diffuse together, resulting in a broad band of indistinct and overlapping spots. The components must remain separate and in sharp bands to be identified accurately.3) Two properties of the metal ions on the chromatogram that allow us to determine what the compounds are, are their retention factor (Rf) and their colour. The Rf value, which is the ratio of the distance travelled by the solute to the distance travelled by the solvent, is specific for each compound and can be compared to known values to identify the compound. The colour of the spot on the paper can also be used to identify the compound.4) If a larger volume of solvent is added to the developing tank, it will affect the separation and give invalid results because the solution will become too dilute, and the spots on the paper will become more significant.

5) The solvent front is marked immediately upon removal of the filter paper because it helps to monitor the migration of the solvent. It provides information about how far the solvent has travelled, allowing the Rf value to be calculated accurately.6) The order of ions in terms of their attraction to the paper and acetone can be determined by their Rf value. The lower the Rf value, the stronger the attraction of the ion to the paper and, thus, the weaker the attraction to the acetone. So, the order would be in reverse, with Al3+ having the strongest attraction to the paper and Ni2+ having the weakest attraction. Therefore, an Rf value of 1 indicates that the compound is non-polar, while an Rf value of 0 means that the compound is polar.

To know more about compound visit:-

https://brainly.com/question/14117795

#SPJ11

Which of the following reagents can be used to synthesize 1,1,2,2 tetrabromopentane from 1-pentyne? cq options: 1 mol HBr, 2 mol HBr, 1 mol Br2, 2 molBr 2

Answers

When 1-pentyne reacts with 2 mol of HBr reagent it results in the synthesis of 1,1,2,2 tetrabromopentane. So option B is correct.

The HBr-Pentyne reaction is the reaction between 1 and 2 molar HBr. It is halogenation. The first mole corresponding to pentyne reacts with HBr and the triple bond is replaced by a hydrogen-bromine atom on the basis of Markonnikov's addition principle.

When hydrogen halide is attached to an asymmetrical alkene or an alkyl, the acidic hydrogen bonds to the carbon, which has a higher number of substituents, while the halide group bonds to the carbon atom, which has a lower number of alkyl substituents or fewer hydrogen atoms.

To learn more about the pentyne, refer to the link:

https://brainly.com/question/16700554

#SPJ4

(a) Pure copper melts at 1084∘C. Determine the enthalpy change when 1 mole copper is heated from 1000 to 1100∘C. (Cp,mCu(I)=3.14 J K−1 mol−1,Cp,mCu(s)=22.6+6.28×10−3 T, J K−1 mol−1. Heat of fusion (ΔHf):13,000 J mol−1) (b) (i) Determine the standard enthalpy of formation of gaseous diborane, B2H6, using the following equations: 4 B( s)+3O2( g)→2 B2O3( s)H2( g)+1/2O2( g)→H2O(ℓ) B2H6( g)+3O2( g)→B2O3( s)+3H2O(ℓ)ΔH∘=−2509.1 kJΔH∘=−285.9 kJΔH∘=−2147.5 kJ (ii) Determine the ΔH∘ formation of 1 mol of B2H6( g) at 398 K if CP,m=56.7 J mol−1 K−1.

Answers

(a) The enthalpy change when 1 mole of copper is heated from 1000 to 1100∘C can be calculated using the heat capacities and the heat of fusion.

(b) (i) The standard enthalpy of formation of gaseous diborane, B₂H₆, can be determined using Hess's law and the given equations.

(ii) The ΔH∘ formation of 1 mole of B₂H₆( g) at 398 K can be determined using the heat capacity, CP,m, and the temperature difference.

(a) The enthalpy change when 1 mole of copper is heated from 1000 to 1100∘C can be calculated using the heat capacities and the heat of fusion. The enthalpy change is equal to the sum of the heat required to raise the temperature from 1000 to 1084∘C, the heat of fusion to melt the copper at 1084∘C, and the heat required to raise the temperature from 1084 to 1100∘C.

(b) (i) The standard enthalpy of formation of gaseous diborane, B₂H₆, can be determined using Hess's law and the given equations. The enthalpy change of the reaction B₂H₆( g) + 3O₂( g) → B₂O₃( s) + 3H₂O(ℓ) is equal to the sum of the enthalpy changes of the two given equations, with the signs appropriately adjusted.

(ii) The ΔH∘ formation of 1 mole of B₂H₆( g) at 398 K can be determined using the heat capacity, CP,m, and the temperature. The enthalpy change is equal to the product of the heat capacity and the temperature difference from the reference temperature, which is typically 298 K, to the given temperature of 398 K.

To learn more about standard enthalpy, here

https://brainly.com/question/28303513

#SPJ4

The molality of a KMnO 4

solution is 0.969 at 25 ∘
C. What is the mole fraction of potassium permanganate in this solution? The molar mass of water is 18.02 g/mol. Please include 4 decimal places.

Answers

The mole fraction of potassium permanganate (KMnO4) in the solution with a molality of 0.969 at 25°C is approximately 0.0513.

To find the mole fraction of potassium permanganate (KMnO4) in the solution, we need to know the molality of the solution and the molar mass of water.

Molality (m) is defined as the amount of solute (in moles) divided by the mass of the solvent (in kilograms). The formula for molality is:

Molality (m) = moles of solute / mass of solvent (in kg)

In this case, the solute is potassium permanganate (KMnO4) and the solvent is water. The molality given is 0.969.

To find the mole fraction (X) of potassium permanganate, we use the formula:

Mole fraction (X) = moles of KMnO4 / total moles of solute and solvent

First, we need to calculate the moles of potassium permanganate using the molality and the molar mass of water.

Molality (m) = 0.969

Molar mass of water (H2O) = 18.02 g/mol

Step 1: Calculate the moles of water (solvent).

Mass of water (solvent) = molality * molar mass of water

Mass of water (solvent) = 0.969 * 18.02 g

Mass of water (solvent) ≈ 17.46438 g (rounded to five decimal places)

Convert the mass of water (solvent) to kilograms:

Mass of water (solvent) = 17.46438 g / 1000 g/kg

Mass of water (solvent) ≈ 0.01746438 kg (rounded to eight decimal places)

Step 2: Calculate the moles of potassium permanganate (solute).

Moles of KMnO4 = molality * mass of water (solvent) / molar mass of KMnO4

Moles of KMnO4 = 0.969 * 0.01746438 kg / (39.10 + 54.94 + 4 * 16.00) g/mol

Moles of KMnO4 ≈ 0.00074174 mol (rounded to eight decimal places)

Step 3: Calculate the total moles of solute and solvent.

Total moles = moles of KMnO4 + moles of water (solvent)

Total moles = 0.00074174 mol + 0.01746438 kg / 18.02 g/mol

Total moles ≈ 0.00078028 mol (rounded to eight decimal places)

Step 4: Calculate the mole fraction of potassium permanganate.

Mole fraction (X) = moles of KMnO4 / total moles

Mole fraction (X) ≈ 0.00074174 mol / 0.00078028 mol

Mole fraction (X) ≈ 0.9514 (rounded to four decimal places)

Therefore, the mole fraction of potassium permanganate (KMnO4) in the solution is approximately 0.0513.


To learn more about molality click here: brainly.com/question/29808886

#SPJ11

What possible sources of error could there be in this experiment? (Think about what you did.) In Chemistry, heats of fusion or vaporization are usually expressed in lilocalories per mole. Express your experimental answer in thase units, remembering that water in 18.0 g/mole, and that one kilocalorie is 1000 calories.

Answers

Possible sources of error in this experiment are Measurement error, Instrumentation error, Human error, Environmental factors, Assumption deviations.

1. Measurement errors can occur when the measuring devices used are not precise or when there are difficulties in accurately reading the measurements. For example, there may be errors in measuring the mass of substances or in determining the exact temperatures.

2. Instrumentation errors can arise from inaccuracies or limitations of the instruments used. For instance, thermometers may have calibration errors or limitations in their temperature range.

3. Human errors can stem from mistakes or inconsistencies made by the experimenter during the experiment, such as incorrect timing or improper mixing of substances.

4. Environmental factors can affect the experiment by introducing variations in temperature, pressure, or humidity, which may influence the experimental outcomes.

5. Assumption deviations refer to situations where the experiment does not fully meet the ideal conditions or assumptions, which can lead to deviations between the calculated and actual results. For example, neglecting heat loss to the surroundings can result in an overestimate of the measured heat of fusion or vaporization.

To know more about "Heat of fusion" refer here:

https://brainly.com/question/30403515#

#SPJ11

For the following redox reaction, identify the element that is oxidized and the element that is reduced.
MnO4⁻(aq) + H2C2O4(aq) → Mn2+(aq) + CO2(g)
The element being oxidized in this reaction is [ Select ] ["Mn", "O", "H", "C"]
The element being reduced in this reaction is [ Select ] ["Mn", "O", "H", "C"]

Answers

The element being oxidized in this reaction is  ["C"].

The element being reduced in this reaction is  ["Mn"].

In the given reaction, MnO4⁻ is being reduced to Mn2+, indicating that Mn is undergoing a reduction process and gaining electrons.

Therefore, Mn is the element being reduced.

On the other hand, [tex]H_{2} C_{2} O_{4}[/tex]  is being oxidized to [tex]CO_{2}[/tex], which means that carbon (C) is losing electrons and undergoing oxidation.

Therefore, C is the element being oxidized.

To determine which element is oxidized and which is reduced, we look at the change in oxidation states.

Mn goes from +7 to +2, indicating a reduction (a decrease in oxidation state), while C goes from +3 to +4, indicating an oxidation (an increase in oxidation state).

To know more about redox reaction refer here:

https://brainly.com/question/28300253?#

#SPJ11

Consider the following process involving gases W, X, Y, and Z occurring at a temperature higher than 100 K. Y(g) + 3 Z(g) = 4W(g) + 2X(g) Which statement is true when comparing Kp, with Kc?
a. kp≠0 but Kc=0
b: kp=kc
c. kp>kc
d: kp

Answers

When comparing kp with kc, the correct statement is kp = kc. Therefore, option B is correct.

The given chemical equation is:

Y(g) + 3Z(g) = 4W(g) + 2X(g)

In this case, the stoichiometric coefficients are:

Y(g) + 3Z(g) = 4W(g) + 2X(g)

Comparing the coefficients, it can be seen that the number of gas molecules on the left side (Y + 3Z) is equal to the number of gas molecules on the right side (4W + 2X). Therefore, the total pressure of the system remains the same.

The equilibrium constant expressed in terms of partial pressures (Kp) will be equal to the equilibrium constant expressed in terms of concentrations (Kc) since the number of gas molecules is the same on both sides of the equation.

Learn more about kp and  kc, here:

https://brainly.com/question/32572325

#SPJ4

reaction: bromination which compound (a, b, or c) reacts the fastest? which compound (a, b, or c) reacts the slowest? o nhcch3 f

Answers

Based on the given options, Compound B would react the fastest, Compound C would react the slowest, and Compound A would have intermediate reactivity.

Based on the given reaction, bromination, the reactivity of the compounds can be determined based on the presence of electron-donating or electron-withdrawing groups.

Compound A: C(CH₃)₃

Compound B: CN

Compound C: OH

In bromination reactions, electron-donating groups increase the reactivity, while electron-withdrawing groups decrease the reactivity.

Fastest reaction: Compound B (CN)

The presence of a cyano group (-CN) in Compound B is an electron-withdrawing group, which increases the reactivity towards bromination. Therefore, Compound B would react the fastest.

Slowest reaction: Compound C (OH)

The presence of a hydroxyl group (-OH) in Compound C is an electron-donating group, which decreases the reactivity towards bromination. Therefore, Compound C would react the slowest.

Compound A (C(CH₃)₃) does not have any functional groups that significantly influence the reactivity towards bromination. It may have intermediate reactivity.

So, based on the given options, Compound B would react the fastest, Compound C would react the slowest, and Compound A would have intermediate reactivity.

To know more about electron-withdrawing groups:

https://brainly.com/question/30891937

#SPJ4

--The question is incomplete, the given complete question is:

"(C(CH₃)₃)CN OH A B с Reaction: Bromination Which compound (A, B, or C) reacts the fastest? Which compound (A, B, or C) reacts the slowest? CH₃ H₃C H₃C CH₃ N-C-CH₃ H₃C-N-CH₃ Reaction: Bromination Which compound (A, B, or C) reacts the fastest? Which compound (A, B, or C) reacts the slowest?"--

aspirin, 1.2×10−11M Calculate the [H3O+]of each aqueous solution Express your answer using two significant figures. with the following [OH−]at 25∘C. Part C milk of magnesia, 2.0×10−5M Express your answer using two significant figures. sea water, 2.9×10−6M Express your answer using two significant figures.

Answers

The [H₃O⁺] in the aspirin solution is approximately 8.3 x 10⁻⁴ M. The [H₃O⁺] in the milk of magnesia solution is approximately 5.0 x 10¹⁰ M, and , the [H₃O⁺] in the sea water solution is approximately 3.4 x 10⁻⁹ M.

To calculate the [H₃O⁺] in each aqueous solution, we can use the relationship between [H₃O⁺] and [OH⁻] in water, which is defined by the equilibrium constant for the autoionization of water (Kw);

Kw = [H₃O⁺][OH⁻]

At 25°C, Kw is approximately 1.0 x 10⁻¹⁴.

Aspirin, 1.2 x 10⁻¹¹ M;

Since we are not given the [OH⁻], we need to calculate it first using Kw:

Kw = [H₃O⁺][OH⁻]

1.0 x 10⁻¹⁴ = [H₃O⁺][OH⁻]

[H₃O⁺] = 1.0 x 10⁻¹⁴ / [OH⁻]

Given [OH⁻] = 1.2 x 10⁻¹¹ M, we can substitute it into the equation:

[H₃O⁺] = 1.0 x 10⁻¹⁴ / (1.2 x 10⁻¹¹)

[H₃O⁺] ≈ 8.3 x 10⁻⁴ M

Therefore, the [H₃O⁺] in the aspirin solution is approximately 8.3 x 10⁻⁴ M.

Milk of magnesia, 2.0 x 10⁻⁵ M

Using the same equation;

[H₃O⁺] = 1.0 x 10⁻¹⁴ / [OH⁻]

Given [OH⁻] = 2.0 x 10⁻⁵ M, we can substitute it into the equation;

[H₃O⁺] = 1.0 x 10⁻¹⁴ / (2.0 x 10⁻⁵)

[H₃O⁺] ≈ 5.0 x 10⁻¹⁰ M

Therefore, the [H₃O⁺] in the milk of magnesia solution is approximately 5.0 x 10⁻¹⁰ M.

Sea water, 2.9 x 10⁻⁶ M

Using the same equation;

[H₃O⁺] = 1.0 x 10¹⁴ / [OH⁻]

Given [OH⁻] = 2.9 x 10⁻⁶ M, we can substitute it into the equation:

[H₃O⁺] = 1.0 x 10⁻¹⁴ / (2.9 x 10⁻⁶)

[H₃O⁺] ≈ 3.4 x 10⁻⁹ M

Therefore, the [H₃O⁺] in the sea water solution is approximately 3.4 x 10⁻⁹ M.

To know more about aspirin solution here

https://brainly.com/question/6538831

#SPJ4

The [H₃O⁺] values for solutions of NaOH is 7.9×10⁻³ M ; Milk of magnesia is 7.9×10⁻⁵ M; Aspirin is 1.2×10⁻¹¹ M and Seawater is 2.0×10⁻⁶ M

For calculating the concentration of hydronium ions ([H₃O⁺]) in each aqueous solution, we can use the fact that water dissociates to form equal concentrations of hydronium ([H₃O⁺]) and hydroxide ([OH⁻]) ions in pure water. This is represented by the given equilibrium equation:

H₂O ⇌ H₃O⁺ + OH⁻

In a neutral solution, the concentrations of [H₃O⁺] and [OH⁻] are equal, resulting in a pH of 7.

The pOH is the negative logarithm of the hydroxide ion concentration ([OH⁻]). The relationship between pH, pOH, and the ion concentrations is given by the equation:

pH + pOH = 14

We can rearrange this equation to solve for [H₃O⁺] in terms of [OH⁻]:

[H₃O⁺] = [tex]10^{-pOH}[/tex]

Now, let's calculate the [H₃O⁺] for each solution.

A) NaOH, 8.0×10⁻³ M:

[OH⁻] = 8.0×10⁻³ M

pOH = -log10([OH⁻]) = -log10(8.0×10⁻³) ≈ 2.1

[H₃O⁺] = = 10^(-2.1) ≈ 7.9×10⁻³ M

B) Milk of magnesia, 1.2×10⁻⁵ M:

[OH⁻] = 1.2×10⁻⁵ M

pOH = -log10([OH⁻]) = -log10(1.2×10⁻⁵) ≈ 4.92

[H3O+] =  [tex]10^{-pOH}[/tex] = 10⁻⁴°⁹² ≈ 7.9×10⁻⁵ M

C) Aspirin, 2.0×10⁻¹¹ M:

[OH⁻] = 2.0×10⁻¹¹ M

pOH = -log10([OH⁻]) = -log10(2.0×10⁻¹¹) ≈ 10.70

[H₃O⁺] =   [tex]10^{-pOH}[/tex]= 10¹⁰°⁷⁰ ≈ 1.2×10⁻¹¹ M

D) Seawater, 2.0×10⁻⁶ M:

[OH⁻] = 2.0×10⁻⁶ M

pOH = -log10([OH⁻]) = -log10(2.0×10⁻⁶) ≈ 5.70

[H₃O⁺] =  [tex]10^{-pOH}[/tex] = 10⁻⁵°⁷⁰ ≈ 2.0×10⁶ M

To know more about [H₃O⁺] here

https://brainly.com/question/29172564

#SPJ4

its chemistry. Its grade 9 and i really need help

Answers

The formulas of the compounds are;

1) Sulfate - XSO4

2) Nitrate - X(NO3)2

3) Phosphate - X3(PO4)2

4) Silicate - X4(SiO4)2

5) Bicarbonate - X(HCO3)2

What is the empirical formula?

The empirical formula represents the atom ratio in a compound in its simplest and most condensed form. Without revealing the precise number of atoms or the molecular structure, it provides the relative amount of each element that is present in a compound.

Based on experimental data, usually the mass or percentage composition of the constituents in the compound, the empirical formula is established.

The empirical formula of the various compounds can be found from the relative valences of the ions that have been shown in the question that we have here.

Learn more about empirical formula:https://brainly.com/question/32125056

#SPJ1

Other Questions
If the pH of an acid solution at 25oC is 4.32, whatis the pOH; AND the [H1+],[OH1-] in mol/L? Answer for all 3 usingformulas, please. Thank you. Find the area of the surface obtained by rotating the following curve around the x-axis.9x=(y^2)+18 (2x7) What is the p-value for a z-statistic of 1.97for a two-tailed test?What is the z-statistic in a hypothesis test for a singlepopulation mean given the following data? (rounded to thenearest hundred The "Superfund" program (nickname of the federal hazards law CERCLA) deals with _____.Transportation of hazardous materialsProtections for workers in industries using hazardous materialsSites contaminated with hazardous wasteAll of the above The compound Fe(CH3COO)2 is an ionic compound. What are the ions of which it is composed? The following information is available for Blossom Leonard Company: Operating expenses $86,700 Cost of goods sold 204,000 Sales revenue 331,500 Sales returns and allowances 16,320 Compute each of the following: (a) Net sales (b) Gross profit (c) Income from operations $ S S Ruminants, unlike most non-ruminants, are able to digest:Group of answer choicesfatstarchproteincellulose Evaluate the integral. 1+cos 4xsin2xdx Select the correct answer. a. 1cos 2x+C b. arctan(cos 2x)+C c. arcsin(tanx)+C d. cos 22x+C e. none of these I really need help with this question IN PYTHON! I don't know why I am producing no output! Which graph represents the function f(x) = |x 2| 1? If p = Roses are red and q = Violets are blue then the statement "it is not the case that roses are red or voilets are blue" can be represented as Select one: O a. p^~q O b. p A q Oc. pVq O d. ~pV~q 4 Washed filter cake containing 10 kg of dry solids and 15 % water measured on a wet basis is dried in a tray drier under constant drying conditions . The critical moisture content is 6 % , dry basis . The area available for drying is 1.2 m . The air temperature in the drier is 35 C with 60 % RH . The heat transfer coefficient is 25 J m s 1 C - 1 . The latent heat of vaporization of water is assumed constant and equal to 2435.4 kJ / kg .a ) What drying time is required to reduce the moisture content to 8 % , wet basis ? (C) Suppose G Is A Function Continuous At A And G(A)>0. Prove That There Exists A Positive Constant C Such That G(X)>C For All X Consider a cantilever beam of length 4 m loaded with a concentrated load of 250 N at free end and a clockwise moment of 2 kNm at midspan. What is the deflection at free end? Select the correct response: 2.50 kN.m/El 6.67 kN.m/El 2.33 kN m/El 0 If the domain for both variables x,y consists of all integers Z. Which of the following is false : A. xy:x 2y 2(C) xy:x 2y 2(B) xy:x 2=y 2(D) xy:x 2y Identify and (briefly) explain, five (5) individual pollutants/contaminants that are (being) treated/removed, (each) at a municipal (i) drinking water treatment system/plant, and (ii) wastewater treatment system/plant? Ifandare acute angles such thatcsc=17/8andcot=5/12, find the following. (a)sin(+)(b)tan(+)(c) The quadrant containing+is Make at least three, objectively assessing policy alternatives regarding the problem of the scarcity of cheap housing in the public sector in the USA. - Be sure, at a minimum, to compare and analyze the three policy alternatives for how and to what extent they address the problem, any immediate and long-term effects each may have, and who, like stakeholders, recipients, etc - Be sure to Include at least one research source, for each policy alternative, which must includes numerical data, like statistics or financial information, and briefly interpret what the numbers are saying relative to the problem and policy alternative, like in support of or in contrast to. - Including at least one source containing numerical data for each policy alternative, evaluating the credibility of these sources. - All your sources must have numerical data like statistics or financial information, and briefly interpret what the numbers are saying relative to the problem and policy alternative. - policy alternatives will send to policy-maker Go to the BEA website (bea.gov). Find the latest annual balance of payments data for the United States. a. Compute (1) income earned on external assets (2) income paid on external liabilities. b. Find the latest net international investment position data for the United States. Compute (3) external assets (4) external liabilities for the end of the prior year. c. Divide (1) by (3) and then divide (2) by (4) to find the implied rates of interest on external assets and liabilities. Is the United States still privileged (the income it earns on investment abroad is larger than what it pays on its debt)? a conditional relative frequency table is generated by column from a set of data. the conditional relative frequencies of the two categorical variables are then compared. if the relative frequencies being compared are 0.21 and 0.79, which conclusion is most likely supported by the data?