Which of the following is a catastrophic event that can impact a human settlement?

a. volcanic eruption
b. soil depletion
c. dwindling water supply
d. none of these

124 L is the correct answer

Thus, the volume of the helium is 124 L when the balloon rises to an altitude where the pressure is only 25 kPa.

What is temperature ?

Temperature is a measure of the thermal energy of a substance or system. It reflects the degree of hotness or coldness of a material, and is a crucial parameter in many physical and biological systems. It is usually measured in units of kelvins, Celsius, or Fahrenheit. The Kelvin scale is an absolute temperature scale, where 0 K represents absolute zero, the temperature at which all matter has no thermal energy. The Celsius and Fahrenheit scales are relative temperature scales, with 0°C and 32°F defined as the freezing point of water and 100°C and 212°F defined as the boiling point of water.

To learn more about temperature, click the given link,

https://brainly.com/question/25677592

#SPJ1

The chance that the first five letters can form the word apple, by rearrangement if necessary, is 1/120.

This is because there are 120 different permutations of the letters a, p, p, l, e, and only one of those permutations forms the word apple. Thus, the probability of forming the word apple is 1/120.

Combination and permutation both refer to the arrangement of objects, while taking a specific number of objects at once (arrangement does not matter in combination). then use the appropriate formula as necessary. Letter arrangement is called permutation. However, avoid using multiple letters in a row. Use the same procedure whether one, two, or any other number of letters appear repeatedly. Additionally, never attempt to determine the value of a factorial of a huge integer.

To learn more about rearrangement click here https://brainly.com/question/29668964

#SPJ4

After 3 half-lives, only 15.625 grams of the original 125-gram sample of U-235 would remain, and approximately 2.1114 billion years would have passed. It's worth noting that this calculation assumes that the decay of U-235 follows a constant exponential decay, which may not be entirely accurate due to variations in decay rates over time.

What is Half Life Reaction?

Half-life is a term commonly used in nuclear physics and chemistry to describe the time required for half of the atoms in a particular sample to decay. In a half-life reaction, the amount of a substance or reactant present in a reaction is reduced by half after a specific amount of time.

In a chemical reaction, the half-life refers to the amount of time it takes for half of the reactants to be converted into products. The half-life of a chemical reaction is dependent on a variety of factors, including temperature, pressure, concentration, and the specific chemical reaction taking place.

After one half-life, half of the original U-235 sample would remain, which would be 62.5 grams (125 g / 2). After two half-lives, only one-quarter (or 25%) of the original sample would remain, which would be 31.25 grams (62.5 g / 2). After three half-lives, only one-eighth (or 12.5%) of the original sample would remain, which would be 15.625 grams (31.25 g / 2).

To determine how much time has passed, we can use the formula:

t = n x t1/2

where t is the total time, n is the number of half-lives, and t1/2 is the half-life of the substance.

In this case, we have n = 3 and t1/2 = 703.8 million years. Therefore, the total time that has passed would be:

t = 3 x 703.8 million years

t = 2.1114 billion years

So, after 3 half-lives, only 15.625 grams of the original 125-gram sample of U-235 would remain, and approximately 2.1114 billion years would have passed. It's worth noting that this calculation assumes that the decay of U-235 follows a constant exponential decay, which may not be entirely accurate due to variations in decay rates over time.

Learn more about Half Life Reaction from given link

https://brainly.com/question/1160651

#SPJ1

Answer:

22.4 liters.

Explanation:

The volume occupied by a gas at standard temperature and pressure (STP) can be calculated using the Ideal Gas Law: PV = nRT.

In this equation, P represents the pressure, V represents the volume, n represents the number of moles of gas, R is the universal gas constant (8.31 J/mol*K), and T is the temperature in Kelvin.

At STP, the pressure is 1 atm and the temperature is 0°C (273 K). If we know the number of moles of gas, we can calculate the volume it would occupy at STP.

For 100 grams of oxygen gas, we first need to convert the mass to moles using the molar mass of oxygen (32 g/mol).

So, 100 g / 32 g/mol = 3.125 moles of oxygen.

Then, plugging in the values into the Ideal Gas Law equation:

V = nRT / P

V = (3.125 moles) * (8.31 J/mol*K) * (273 K) / (1 atm)

The volume would be approximately 22 L,


ALLEN

The option that exemplifies a molecular formula is [tex]P_4O_{10[/tex].

A molecular formula is a chemical formula that represents the number and type of atoms present in a molecule. A molecular formula specifies the exact number of atoms of each element in a molecule, which can help to identify the type of molecule and its composition.

Molecular formulas are unique from empirical formulas. Empirical formulas are the simplest formulas that show the atoms present in a compound in their simplest whole-number ratios.

Thus, C₂H₁₁, C₂H₁₂O, and [tex]P_2O_5[/tex] are all empirical formulas while [tex]P_4O_{10[/tex] is a molecular formula.

More on molecular formulas can be found here: https://brainly.com/question/1247523

#SPJ1

Histidine is an essential amino acid that plays an important role in many biological processes. It is one of the most common amino acids found in proteins and is involved in the formation of enzymes, hormones, etc.

The pKa values of the functional groups in histidine are as follows:

I. Ammonium group: 9.25

II. Amine group: 9.89

III. Carboxylic acid group: 1.77

IV. Alpha carbon: 6.00

V. Pros-nitrogen on the imidazole: 9.17

VI. Tele-nitrogen on the imidazole: 7.59

As all these pKa values are much higher than the pH values typically found in a cell (which is around 7.0), histidine is considered to be a triprotic acid. It is also important for proper growth and development, as well as for maintaining the balance of acids and bases in the body.

To learn more about histidine click here https://brainly.com/question/30599919

#SPJ4

complete question: 2.However, under most biological conditions, histidine is considered to be a tri-protic acid (see the provided link for histidine nitrogen nomenclature). This is due to the following functional groups having pKa values that are much higher than the pH values typically found in a cell. I. Ammonium group II. Amine group III. Carboxylic acid group IV. Alpha carbon V. Pros-nitrogen on the imidazole (the nitrogen off of carbon 4 of histidine) VI. Tele-nitrogen on the imidazole (the nitrogen off of carbon 5 of histidine)

The lead nitrate [tex]PB (NO_{3})_{2}[/tex] is soluble in water. It will dissociate into [tex]Pb^{2+}[/tex] (aq) ion and [tex]NO_{3}^{-}[/tex] ion.

Reaction

[tex]Pb(NO_{3})_{2} (s) + H_{2}O (l) - > Pb^{2+} (aq) + 2NO_{3}^{-} (aq)[/tex]

Lead(II) nitrate is an inorganic compound with the chemical formula Pb(NO₃)₂. It commonly occurs as a colorless crystal or white powder and, unlike most other lead(II) salts, is soluble in water.

What is lead nitrate used for?

Lead Nitrate is a white or colorless, sand-like solid. It is used in making matches and special explosives, in the dye and photography industries, and in process engraving. List because it is cited by OSHA, ACGIH, DOT, NIOSH, NTP, DEP, IARC and EPA.

To know more about Lead nitrate, visit: brainly.com/question/26980915

#SPJ4

The most likely the mass of the dust formed on the burning the piece of paper is 2.5 grams.

According to the law of conservation of mass : The mass can neither be created nor be destroyed but it will  only be transformed from the one form to the another. In the chemical reaction the total mass on the reactant side will always be equal to the total mass of the product side.

The mass on the reactant side:

The Mass of the paper = 4.8 grams

On the product side:

Mass of the ash = 0.1 g

Mass of the smoke = 2.2 g

Total mass = 4.8 g

Mass of the Dust = 4.8 - ( 2.2 + 0.1)

                             = 2.5 g

To learn more about mass here

https://brainly.com/question/23901006

#SPJ4

This question is incomplete, the complete question is :

One student burned a piece of paper weighing 4.8 grams. The table below shows the mass of the materials formed by burning the paper.

Ash- 0.1 grams

Smoke- 2.2 grams

Dust- ?

Which is most likely the mass of the dust formed on the burning piece of paper?

A. 2.2 grams

B. 2.3 grams

C. 2.5 grams

D. 2.6 grams

The density of oxygen, the efficiency of the nuclear fission process and the density of carbon are the three conversion factor that would used to find the volume of carbon dioxide obtained from 1.5 l of oxygen.

The Nuclear fission is defined as a reaction in which the nucleus of an atom splits into two or more smaller nuclei. The nuclear fission process  produces gamma photons and releases a very large amount of energy even by the energetic standards of radioactive decay. The physical properties and the chemical properties of carbon depend on the crystalline structure of the element. The density of carbon fluctuates from 2.25 g/cm³ for graphite and 3.51 g/cm³ for diamond. The density of oxygen is 1.428 g/L at a standard temperature and pressure. The molar mass of an oxygen atom is 15.9996 grams per mole. The term density is defined by the mass to volume ratio of a substance. Density has the units of g/L or kg/m3. Oxygen is a diatomic gas. It has the bond angle of 180 degree.

To learn more about Nuclear fission please visit:

https://brainly.com/question/3992688

#SPJ4

You would anticipate that heterozygotes would make up 0.0016 of the population. if the an allele frequency is 20% and the an allele frequency is 80%

AA × AA = 0.4096

AA × Aa = 0.4096

AA × aa = 0.0512

Aa × Aa = 0.1024

Aa × aa = 0.0256

aa × aa = 0.0016

The genotype of the organism is heterozygous. In a heterozygous pairing, a dominant allele will take precedence over a recessive allele's features. However, certain alleles may be codominant, which means that neither one operates as dominant or recessive. The human ABO blood group system is one illustration.

homozygote, a living being with identical gene pairs (also known as alleles) for a certain attribute. The organism is said to be homozygous for a characteristic if both of the two gametes (sex cells) that merge during fertilisation possess the identical form of the gene for that trait. The genes for a certain characteristic differ in heterozygous organisms, often known as heterozygotes.

Learn more about Heterozygotes here:

https://brainly.com/question/14607823

#SPJ4

Rigel IV is approximately 63.3 trillion miles away from Earth.

One light-year is a unit of distance that is defined as the distance that light travels in one year. Since light travels at a constant speed of approximately 186,282 miles per second (299,792 kilometers per second), which is approximately 5.88 trillion miles. Therefore, to convert 10.8 light-years to miles, we can multiply 10.8 by the number of miles in one light-year:

10.8 light-years * 5.88 trillion miles per light-year = 63.3 trillion miles

Therefore, Rigel IV is approximately 63.3 trillion miles away from Earth.

To know more about the light years, here

brainly.com/question/14534942

#SPJ4

An interference pattern is observed on the other side of the slits in the experiments A,B,C but not in the experiment D.

A. Yes, an interference pattern is observed on the other side of the slits in this experiment. Even though the electrons are fired one at a time, the interference pattern emerges over time due to the wave-like nature of the electrons.

B. Yes, an interference pattern is observed on the other side of the slits in this experiment. The act of observing which slit the electron goes through causes the wave function to collapse and destroys the interference pattern.

C. Yes, an interference pattern is observed on the other side of the slits in this experiment. The high-intensity light beam acts as a wave and creates an interference pattern as it passes through the two slits.

D. No, an interference pattern is not observed on the other side of the slits in this experiment. A gun firing solid particles like bullets is a classical object and does not exhibit wave-like behavior, so no interference pattern can be observed.

To learn more about interference pattern Click here:

brainly.com/question/1581262

#SPJ4

A Grignard reagent called phenylmagnesium bromide will combine with water to create the neutral organic compound benzene. Grignard reagents are highly reactive with water and other protic solvents, which causes this reaction.

Bromophenylmagnesium, sometimes referred to as phenylmagnesium bromide, is an organometallic substance having the formula C6H5MgBr. It belongs to the family of Grignard reagents, a class of popularly used organometallic compounds in organic synthesis. A white crystalline solid, phenylmagnesium bromide is strongly reactive with a wide range of electrophiles, such as carbonyl compounds, esters, and acid chlorides. It is frequently utilised in the synthesis of a variety of medicines, agrochemicals, and natural products as well as in the production of carbon-carbon bonds in organic chemistry. But it needs to be managed carefully and cautiously because of how reactive it is.

Learn more about phenylmagnesium bromide here:

https://brainly.com/question/13864374

#SPJ4

Answer:

jjijjĵjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjhh

Explanation:

ju8uhtyù

Weak acid (carbonic acid) results when Nitrogen dioxide is dissolved in water contains no impurities.

Carbonic acid is a carbon- containing emulsion which has the chemical formula H2CO3. results of carbon dioxide in water contain small quantities of this emulsion. Its chemical formula can also be written as OC( OH) 2 since there exists one carbon- oxygen double bond in this emulsion.

Carbonic acid is frequently described as a respiratory acid since it's the only acid that's exhaled in the gassy state by the mortal lungs.

Nitrogen dioxide is a chemical emulsion with the formula NO2. It's one of several nitrogen oxides. NO2 is an intermediate in the artificial conflation of nitric acid, millions of tons of which are produced each time for use primarily in the product of diseases. At advanced temperatures it's a sanguine- brown gas.

Learn more about Weak acid:

https://brainly.com/question/29035097

#SPJ4

The correct answer is

E) F2 can be classified as a weak electrolyte

The atomic number of fluorine is nine, and its chemical symbol is F. It is the palest halogen and is normally an exceedingly deadly pale yellow diatomic gas. It is the most electronegative reactive element and is extremely reactive, interacting with all other elements except for light inert gases.Fluorine atoms have nine electrons, one fewer than neon, and their electron configuration is 1s22s22p5—two in a full inner shell and seven in an empty outer shell. The physical properties of the atom are affected by the large effective nuclear charge (9 2 = 7) and insufficient nuclear shielding of the outer electrons.

To learn more about Fluorine click the link below

brainly.com/question/214125

#SPJ4

30.7 g of CH3OH would need to be added to 270 g of water to lower its freezing point by 1.0 °C.

To determine the mass of CH3OH needed to lower the freezing point of 270g of water, we need to use the freezing point equation:

ΔT = Kf·m

To calculate the molality of the solution, we need to convert the mass of water to kilograms:

mass of water = 270 g = 0.27 kg

Since we are assuming that only CH3OH is being added to the water, the number of moles of CH3OH can be calculated using its mass and molar mass:

molar mass of CH3OH = 32.04 g/mol

moles of CH3OH = mass of CH3OH / molar mass of CH3OH.

using the freezing point :

ΔT = Kf·m

ΔT = [tex]T_{f}[/tex] - T0

where [tex]T_{f}[/tex] is the freezing point of the solution and T0 is the freezing point of pure water (0 °C).

Since we want to lower the freezing point of water, ΔT is negative, so we can rearrange the equation to solve for the mass of CH3OH:

mass of CH3OH = (ΔT / Kf) · molar mass of CH3OH · mass of solvent

Substituting the known values:

ΔT = -1.86 °C (the freezing point for a 1-molal solution of any solute in water)

T0 = 0 °C

molar mass of CH3OH = 32.04 g/mol

mass of solvent = 270 g = 0.27 kg

We can solve for m by rearranging the molality equation:

m = moles of solute/mass of solvent (in kg)

ΔT = Kf·m

-1.0 °C = (1.86 °C·kg/mol) · m

m = -0.538 mol/kg

Substituting the values into the mass equation:

mass of CH3OH = (-1.0 °C / (1.86 °C·kg/mol)) · 32.04 g/mol · 0.27 kg / (-0.538 mol/kg)

mass of CH3OH = 30.7 g

Therefore, 30.7 g of CH3OH would need to be added to 270 g of water to lower its freezing point by 1.0 °C.

learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ4

Serotonin and norepinephrine are both neurotransmitters, which are small molecules that are released from neurons and act on other neurons in the brain.

Serotonin is primarily responsible for regulating mood, sleep, appetite, and other cognitive functions, while norepinephrine is responsible for regulating alertness and arousal, as well as the body's fight-or-flight response. Serotonin is thought to be involved in processes such as learning, memory, and decision making, while norepinephrine is involved in regulating the autonomic nervous system and certain hormones.Noradrenaline, also called norepinephrine, is a neurotransmitter and a hormone. Your body's "fight-or-flight" response depends on it. Norepinephrine is a medication that is used in specific, urgent, short-term medical settings to raise and maintain blood pressure.

learn more about Serotonin Refer:brainly.com/question/9595557

#SPJ4

A three-dimensional space where an electron spends most of its time with at least 3 other electrons is called an electron orbital.

An orbital is a region of space around the nucleus where an electron is likely to be found. Orbitals are described by a set of quantum numbers that define the energy, shape, and orientation of the orbital. Each orbital can hold a maximum of two electrons with opposite spins, so when there are at least 3 other electrons in the same space, they are occupying multiple orbitals.

Each orbital is associated with a specific energy level and can hold a maximum of two electrons. There are different types of orbitals, including s, p, d, and f orbitals, each with a different shape and size. The arrangement of electrons in an atom's orbitals determines the chemical properties of the atom.

Learn more about electron orbitals at https://brainly.com/question/26000020

#SPJ11

It will have a mass of 3.025 amu. This is because the mass of a tritium atom is made up of the mass of one proton, two neutrons, and three electrons.

The mass of a single atom of 3H (tritium) can be predicted by adding the mass of the three protons, three neutrons, and three electrons in the atom. Since a single atom of 3H (tritium) contains 3 protons, 3 neutrons, and 3 electrons, the mass of a single atom of 3H (tritium) can be calculated by adding the mass of each of these particles together.

The mass of a single atom of 3H (tritium) can be calculated using the equation:

Mass of 3H (tritium) = [tex](3 * Mass of Proton) + (3 * Mass of Neutron) + (3 * Mass of Electron)[/tex]

Mass of 3H (tritium) =[tex](3 *1.0074 amu) + (3 *1.0087 amu) + (3 * 0.00054858 amu)[/tex]

Mass of 3H (tritium) = [tex]3.0218 amu[/tex]

Therefore ,he mass of a single atom of 3h (tritium) is 3.0218 amu

learn more about tritium Refer:brainly.com/question/13559964

#SPJ4

complete question:the mass of a proton is 1.0074 amu, the mass of a neutron is 1.0087 amu, and the mass of an electron is 0.00054858 amu. given this information, what can you predict for the mass of a single atom of 3h (tritium)?

it will have a mass of exactly 3 amu

it will have a mass of 1.008 amu

it will have a mass of 3.025 amu

it will have a mass somewhat greater than 3.025 amu

it will have a mass somewhat less than 3.025 amu

The following are soluble in water;

vitamin c

The solubility of a substance in water refers to the amount of the substance that can dissolve in a given amount of water at a specific temperature and pressure.

The solubility of a substance can be determined by conducting an experiment in which a known amount of the substance is added to a known amount of water, and the mixture is stirred until no more of the substance can dissolve. The concentration of the dissolved substance can then be determined by measuring its mass, volume or concentration using a suitable method.

Learn more about water:https://brainly.com/question/28465561

#SPJ1

the groundwater system, the temperature of the water may be lower than that of the other system, but the total thermal energy (i.e., the sum of the kinetic energy of all the water molecules) can still be higher due to the larger volume of water being used

The temperature of a substance is a measure of the average kinetic energy of its molecules, and it does not depend on the number of molecules. Therefore, if two objects have the same temperature, they have the same average kinetic energy per molecule, regardless of the number of molecules.

However, the actual amount of heat transferred to the school depends on the temperature difference between the water and the building, as well as the rate of flow of the water.

It is important to note that the amount of energy needed to heat a space also depends on the thermal insulation and other factors, such as the air temperature, humidity, and solar radiation. Therefore, it is not accurate to say that the groundwater system will necessarily heat the school more than the other system, based solely on the amount of water being used.

Learn more about temperature here:

https://brainly.com/question/15267055

#SPJ4

Phase changes involving an increase in the degree of molecular disorder typically correspond to an increase in entropy.

Conversely, phase changes that decrease the degree of molecular disorder are associated with a decrease in entropy.
At a given temperature and pressure, the sequence of phase changes that represents an increase in the degree of molecular disorder is:
solid → liquid → gas
Therefore, the sequence of phase changes that represents a decrease in the degree of molecular disorder, and hence a decrease in entropy, is:
gas → liquid → solid
For example, when water vapor condenses to form liquid water, the degree of molecular disorder decreases, and hence entropy decreases.
in some cases, the phase change from a gas to a solid may bypass the liquid phase altogether, as in the case of deposition, where a gas transforms directly into a solid.

Learn more about entropy and phase changes here:

https://brainly.com/question/16718133

#SPJ4

Taking into account the reaction stoichiometry, 16.345 moles of O₂ are required if 4.67 mol of ethane undergo combustion.

The balanced reaction is:

2 C₂H₆ + 7 O₂  → 4 CO₂ + 6 H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The following rule of three can be applied: If by reaction stoichiometry 2 moles of C₂H₆ react with 7 moles of O₂, 4.67 moles of C₂H₆ react with how many moles of O₂?

moles of O₂= (4.67 moles of C₂H₆× 7 moles of O₂) ÷2 moles of C₂H₆

moles of O₂= 16.345 moles

Finally, 16.345 moles of O₂ are required.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Washing the precipitate is important for ensuring the accuracy and precision of the gravimetric analysis.

Gravimetric analysis is a quantitative analytical method that involves the determination of the mass of a substance of interest through precipitation, filtration, washing, and drying. Washing a precipitate is an important step in this process and is done for several reasons, including:

To remove any impurities: During the precipitation step, other substances may also be present in the solution that can become trapped in the precipitate. Washing the precipitate removes these impurities and ensures that the measured mass accurately reflects the substance of interest.

To remove any excess reagents: After precipitation, there may be excess reagents that were used to initiate the reaction. If these reagents are not removed, they can affect the mass of the precipitate and thus affect the accuracy of the measurement.

To learn more about Gravimetric analysis :

https://brainly.com/question/6178384

#SPJ4

157.6 g of Tris-HCl to make 100 ml of the binding buffer with a concentration of 100 mM.

To make 100 ml of the binding buffer with 100 mM Tris-HCl and 150 mM NaCl, we first need to calculate the amount of each reagent required. The molecular weight of Tris-HCl is 157.6 g/mol, and the molecular weight of NaCl is 58.44 g/mol.

To calculate the mass of Tris-HCl required, we can use the formula:

mass = (concentration x volume x molecular weight) / 1000

where concentration is in mM, volume is in ml, and the molecular weight is in g/mol.

Substituting the given values, we get:

mass of Tris-HCl = (100 mM x 100 ml x 157.6 g/mol) / 1000 = 157.6 g

Therefore, we need 157.6 g of Tris-HCl to make 100 ml of the binding buffer with a concentration of 100 mM.

To calculate the mass of NaCl required, we can use the same formula:

mass = (concentration x volume x molecular weight) / 1000

Substituting the given values, we get:

mass of NaCl = (150 mM x 100 ml x 58.44 g/mol) / 1000 = 87.66 g

Therefore, we need 87.66 g of NaCl to make 100 ml of the binding buffer with a concentration of 150 mM.

To make the buffer, we can follow the following steps:

Learn more about buffers at

https://brainly.com/question/28297956

#SPJ4

The correct answer is 40g of 13% alcohol solution and 10g 0f 18% alcohol solution is used by the Pharmacist.

An alcoholic solution is a mixture of water and ethanol used as a solvent. Alcoholic solutions containing ethanol can form during the fermentation of sugar-containing compounds. How much ethanol should be added to the water to make this alcoholic solution? An alcoholic solution is a mixture of water and ethanol used as a solvent.A solution is "a homogeneous mixture made up of two or more components," according to the definition. Alcohol wouldn't contain a lot of chemicals by itself, thus it couldn't be a solution.

However, the word "alcohol" is also often used in English to refer to a range of alcoholic beverages that also include other kinds of molecules, such as ethyl alcohol. Are there any common examples of alcoholic beverages, such as liquor, wine, or beer, that are solutions in the scientific sense that would allow the pun.

To learn more about Alcohol solution click the link below

brainly.com/question/28032571

#SPJ4

Answer:

40 grams of 13% and 10 grams of 18%.

Notes:

Hi. :)

According to the first law of thermodynamics, energy can be transferred from one system to another or transformed from one form to another, but it cannot be created or destroyed.

The first law of thermodynamics is also known as the law of conservation of energy. In short, the law states that the amount of energy is and will always be constant, as it can't be created or destroyed.

For example, when a car engine burns gasoline, the chemical energy in the gasoline is transformed into thermal energy (heat) and mechanical energy (motion). The total amount of energy in the system remains the same, but it is transformed into different forms.

Similarly, when you lift a weight, you transfer energy from your muscles to the weight, causing it to move. The total amount of energy in the system remains the same, but it is transferred from one object to another.

Learn more about conservation of energy at https://brainly.com/question/166559

#SPJ11