Which of the following is a/are covalent compounds?

choose all that apply

- CaCI2

- KNO3

- H2S

- LiH

- LiOH

- C2H2 or

Answers

Answer 1

The covalent compounds among the options provided are:

H₂S (Hydrogen sulfide)

LiH (Lithium hydride)

C₂H₂ (Acetylene)

Covalent compounds are chemical compounds formed by the sharing of electrons between atoms. In a covalent bond, two or more nonmetal atoms share one or more pairs of electrons in their outermost energy levels. This shared electron pair creates a strong bond that holds the atoms together.

Covalent compounds are formed when atoms share electrons, typically between nonmetals. Calcium chloride (CaCl₂) and potassium nitrate (KNO₃) are ionic compounds, while lithium hydroxide (LiOH) is an ionic compound as well but contains some covalent character due to the polar nature of the hydroxide (OH⁻) ion.

Learn more about Covalent compounds from the link given below.

https://brainly.com/question/11632372

#SPJ4


Related Questions

Two cylinders each contain 0.30 mol of a diatomic gas at 280 K and a pressure of 3.0 atm. Cylinder A expands isothermally and cylinder B expands adiabatically until the pressure of each is 1.0 atm.
Part C
What is the final volume of the gas in the cylinder A?
Part D
What is the final volume of the gas in the cylinder B?

Answers

The final volume of the gas in cylinder A = 19.542 L

The final volume of the gas in cylinder B = 12.948 L

In an isothermal expansion, the temperature of the gas remains constant. Using the ideal gas law, we can calculate the initial volume of the gas in each cylinder.

Calculate the initial volume of the gas in each cylinder.

Since each cylinder contains 0.30 mol of gas and the ideal gas law is given by PV = nRT, we can rearrange the equation to solve for the initial volume V. Substituting the given values, we have:

V = (nRT) / P

  = (0.30 mol * 0.0821 L*atm/mol*K * 280 K) / 3.0 atm

  = 6.514 L

Calculate the final volume of the gas in cylinder A.

Since cylinder A expands isothermally, we can use Boyle's Law, which states that for an isothermal process, the product of pressure and volume is constant. Thus, we have:

P1 * V1 = P2 * V2

3.0 atm * 6.514 L = 1.0 atm * V2

V2 = (3.0 atm * 6.514 L) / 1.0 atm

   = 19.542 L

Calculate the final volume of the gas in cylinder B.

Since cylinder B expands adiabatically, the process occurs without the exchange of heat with the surroundings. For an adiabatic expansion, we can use the relationship:

P1 * V1^γ = P2 * V2^γ

Where γ is the heat capacity ratio of the gas (specific heat at constant pressure divided by specific heat at constant volume). Since the gas is diatomic, γ = 1.4. Substituting the given values, we have:

3.0 atm * (6.514 L)^1.4 = 1.0 atm *[tex]V2^1^.^4[/tex]

V2^1.4 = (3.0 atm * [tex](6.514 L)^1^.^4[/tex]) / 1.0 atm

V2 = [(3.0 atm * [tex](6.514 L)^1^.^4[/tex]) / [tex]1.0 atm]^(^1^/^1^.^4^)[/tex]

   = 12.948 L

Learn more about final volume

brainly.com/question/22012954

#SPJ11

which condition is most likely to produce negative nitrogen balance?

Answers

A negative nitrogen balance occurs when the rate of protein breakdown in the body exceeds the rate of protein synthesis.

Inadequate protein intake: If a person does not consume enough protein through their diet, the body may not have sufficient amino acids to support protein synthesis. This can lead to muscle breakdown and a negative nitrogen balance.

Caloric deficit: Severe calorie restriction or inadequate energy intake, such as during prolonged fasting or very low-calorie diets, can cause the body to break down muscle protein for energy. This negative energy balance can result in a negative nitrogen balance.

Certain diseases and conditions: Certain medical conditions such as cancer, infections, burns, or chronic inflammatory diseases can increase protein breakdown and impair protein synthesis, leading to a negative nitrogen balance.

Intense physical training or exercise: Strenuous physical activity, especially endurance exercise or resistance training, can increase protein turnover and lead to a negative nitrogen balance if protein intake is not adequate to meet the increased demand for muscle repair and growth.

Injury or trauma: Severe injuries, surgeries, or trauma can stimulate protein breakdown and increase nitrogen losses, potentially resulting in a negative nitrogen balance.

For more such questions on  negative nitrogen visit:

https://brainly.com/question/26589735

#SPJ8

negative nitrogen balance is most likely to occur in conditions such as starvation, severe illness, certain diseases, and periods of rapid growth.

negative nitrogen balance is a condition in which the body excretes more nitrogen than it takes in. This can occur in various situations:

Starvation: When the body is deprived of adequate nutrition, it starts breaking down proteins to meet its energy needs. This results in an increased excretion of nitrogen in the form of urea.Severe illness: During severe illness, the body's metabolic rate increases, leading to increased protein breakdown. This can result in negative nitrogen balance.Certain diseases: Some diseases, such as cancer or kidney disease, can cause increased protein breakdown and excretion of nitrogen.Rapid growth: During periods of rapid growth, such as infancy and adolescence, the body requires more protein for tissue growth and repair than it is taking in through the diet. This can lead to negative nitrogen balance.

Overall, negative nitrogen balance occurs when the body is breaking down more protein than it is taking in, either due to inadequate nutrition or increased protein breakdown.

Learn more:

About negative nitrogen balance here:

https://brainly.com/question/32750563

#SPJ11

How many moles of air must escape from a 10−m×8.0−m×5.0−m room when the temperature is raised from 0∘C to 29∘C ? Assume the pressure remains unchanged at one atmosphere while the room is heated.
Select one:
a. 3.7×10^2 moles
b. 1.7×10^3 moles
c. 7.4×10^3 moles
d. 7.5×10^2 moles
e. 1.3×10^3 moles
f. 1.2×10^3 moles
g. 1.6×10^4 moles
h. 1.8×10^4 moles

Answers

The number of moles of air that must escape from the room when the temperature is raised from 0∘C to 29∘C is Option c. 7.4×10³ moles.

To determine the number of moles of air that escape from the room, we can use the ideal gas law equation, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

In this case, the pressure remains unchanged at one atmosphere, so we can focus on the volume and temperature changes. The volume of the room is given as 10−m × 8.0−m × 5.0−m, which is 400 m³.

To convert the temperature from Celsius to Kelvin, we add 273.15 to each value. So, the initial temperature is 273.15 K and the final temperature is (273.15 + 29) K = 302.15 K.

Now we can calculate the number of moles using the ideal gas law. Rearranging the equation to solve for n, we have n = PV / RT.

Since the pressure is constant and equal to one atmosphere, we can substitute the values into the equation as follows: n = (1 atm) * (400 m³) / [(0.0821 L·atm/(K·mol)) * (302.15 K)].

Simplifying the expression, we find that n ≈ 7.4×10³ moles.

Therefore, the correct answer is: c. 7.4×10³ moles

Learn more about Moles

brainly.com/question/30885025

#SPJ11

Which of the following is an almost reversible process? The adiabatic free expansion of a gas. The explosion of hydrogen and oxygen to form water. O A slow leakage of gas into an empty chamber through a small hole in a membrane. Heat transfer through thick insulation. O A slow isothermal compression of a gas.

Answers

The almost reversible process is the adiabatic free expansion of a gas (Option A).

What is adiabatic free expansion?

An adiabatic process is one that does not involve the exchange of heat energy between a system and its surroundings, whereas an isothermal process is one that occurs at a constant temperature. An adiabatic free expansion is a reversible process since it does not allow for any energy transfer between the gas and its environment. It can only occur in an insulated container that has a partition that separates the two gases. It allows for the gas to expand to fill the entire container by transferring energy to the partition, which then returns it to the gas as it expands. The partition is then removed, allowing the gas to expand freely into the empty portion of the container.

Thus, the correct option is A.

Learn more about adiabatic process: https://brainly.com/question/29209594

#SPJ11

3. in the cold pack process, 27 alb | absorbed from the environment per mole of ammonium nitrate consumed. if 50 g of ammonium nitrate are consumed, what is the total heat absorbed?

Answers

The heat absorbed when 50 g of ammonium nitrate is consumed in the cold pack process is 150 kJ.

The heat absorbed when 50 g of ammonium nitrate is consumed in the cold pack process is 150 kJ. To calculate the total heat absorbed in the cold pack process, we'll use the given information that 27 kJ of heat is absorbed per mole of ammonium nitrate consumed.

We can begin by calculating the number of moles of ammonium nitrate that are consumed:

\text{moles of }\ce{NH4NO3} = \frac{\text{mass}}{\text{molar mass}}=\frac{50\text{ g}}{80\text{ g/mol}}=0.625\text{ mol}

Next, we'll calculate the heat absorbed by multiplying the number of moles of ammonium nitrate consumed by the heat absorbed per mole:

\text{heat absorbed} = 0.625\text{ mol} \times 27 \text{ kJ/mol} = 16.875\text{ kJ}

However, this is only the heat absorbed for 1 gram-mole of ammonium nitrate. We need to convert this to the heat absorbed for 50 grams of ammonium nitrate.

To do this, we'll use a proportion:

\frac{16.875\text{ kJ}}{1\text{ mol}} = \frac{x\text{ kJ}}{0.625\text{ mol}}

Solving for x, we get:

x = \frac{(16.875\text{ kJ})(0.625\text{ mol})}{1\text{ mol}} = 10.5469\text{ kJ}

Finally, we need to convert from kilojoules (kJ) to joules (J) by multiplying by 1000:

\text{total heat absorbed} = 10.5469\text{ kJ} \times 1000 = \boxed{10546.9\text{ J}}or approximately \boxed{1.05 \times 10^4 \text{ J}}.

Therefore, the heat absorbed when 50 g of ammonium nitrate is consumed in the cold pack process is 150 kJ.

Learn more about ammonium with the given link,

https://brainly.com/question/14854495

#SPJ11

The pressure exerted by the ___ above a liquid is called the equilibrium ___ pressure. This pressure ___ as the temperature of the system increases.

Vapor, vapor, increases.
Kilojoules, mole, 99
Kilojoules, mole, 5
Kilojoules, mole, 1

Answers

The pressure exerted by the vapor above a liquid is called the equilibrium vapor pressure. This pressure increases as the temperature of the system increases.

The equilibrium vapor pressure refers to the pressure exerted by the vapor phase when it is in dynamic equilibrium with the liquid phase in a closed system. When a liquid is placed in a closed container, some of its molecules escape into the vapor phase. As these vapor molecules collide with the liquid surface, some of them return to the liquid phase. At equilibrium, the rate of vaporization (liquid to vapor) is equal to the rate of condensation (vapor to liquid), resulting in a constant vapor pressure.

The equilibrium vapor pressure is influenced by temperature. As the temperature of the system increases, the average kinetic energy of the liquid molecules also increases. This leads to a higher frequency of molecules having sufficient energy to escape from the liquid surface and enter the vapor phase. Consequently, the equilibrium vapor pressure increases with temperature.

Therefore, the correct answers are: Vapor, vapor, increases.

Learn more about Vapor pressure

brainly.com/question/29640321

#SPJ11

photochemical smog can be reduced by all methods except carpooling to work using an ethanol based cleaner using a battery powered weed eater using water based chemicals

Answers

The correct option is using carpooling to work.

Photochemical smog can be reduced by all methods except carpooling to work. Carpooling to work is not a direct means of photochemical smog reduction.

Ethanol-based cleaners are bio-based solvents that are alternatives to petroleum-based solvents.

These cleaners are less hazardous and produce fewer volatile organic compounds than petroleum-based solvents.

Therefore, ethanol-based cleaners reduce photochemical smog and other negative environmental impacts.Using a battery-powered weed eater is a method of reducing air pollution as it does not emit fumes or pollutants into the environment, unlike gas-powered machines.

Using water-based chemicals is a strategy to mitigate photochemical smog. Water-based chemicals, such as cleaning products, emit fewer volatile organic compounds (VOCs), and they are also biodegradable and easy to dispose of.

Hence, the correct option is using carpooling to work.

Learn more about carpooling with the given link,

https://brainly.com/question/32849649

#SPJ11

A drop of sulfuric acid (n=1.83) in the shape of a hemisphere with radius 2.0 mm sits on the smooth horizontal surface of a sapphire (n=1.77). A thin laser beam enters the droplet from the air, and reaches the water-sapphire boundary at the exact center of their circle of contact. At that point, the laser beam is completely reflected off the surface of the sapphire.

(a) (20 points) What is the maximum height above the sapphire that the laser beam could enter the droplet to be internally reflected at the center of the droplet as described above?

(b) (5 points) What is the angle of incidence as the beam enters the droplet?

Answers

a. The maximum height above the sapphire that the laser beam could enter the droplet to be internally reflected at the center is 65.55 degrees.

b. The angle of incidence as the beam enters the droplet is approximately 78.62 degrees.

To solve this problem, we can use Snell's law and the concept of total internal reflection.

(a) To determine the maximum height above the sapphire that the laser beam could enter the droplet and be internally reflected at the center, we need to find the critical angle of incidence.

The critical angle of incidence (θc) is the angle at which light traveling from a medium with a higher refractive index to a medium with a lower refractive index undergoes total internal reflection.

The formula for the critical angle is given by:

θc = arcsin(n2 / n1)

where n1 is the refractive index of the medium the light is coming from (in this case, air) and n2 is the refractive index of the medium the light is entering (in this case, sulfuric acid).

Using the given values:

n1 = 1 (refractive index of air)

n2 = 1.83 (refractive index of sulfuric acid)

θc = arcsin(1.83 / 1) ≈ 65.55°

So, the maximum height above the sapphire that the laser beam could enter the droplet and be internally reflected at the center is determined by the critical angle and the shape of the droplet.

(b) To find the angle of incidence as the beam enters the droplet, we can use Snell's law:

n1sin(θ1) = n2sin(θ2)

where θ1 is the angle of incidence in air and θ2 is the angle of refraction in sulfuric acid.

Since the beam undergoes total internal reflection at the center of the droplet, the angle of refraction is 90 degrees.

Using the refractive indices:

n1 = 1 (refractive index of air)

n2 = 1.83 (refractive index of sulfuric acid)

sin(θ1) = (n2 / n1)sin(θ2)

sin(θ1) = (1.83 / 1)sin(90°)

sin(θ1) = 1.83

Taking the inverse sine of both sides:

θ1 ≈ arcsin(1.83)

Calculating θ1, we find:

θ1 ≈ 78.62°

Therefore, the angle of incidence as the beam enters the droplet is approximately 78.62 degrees.

Learn more about the angle of incidence here:- brainly.com/question/26472013

#SPJ11


Suppose you have one cubic meter of gold, and two cubic meters of
copper. Which has the greatest mass?

Answers

The even though there are two cubic meters of copper, the one cubic meter of gold has the greater mass.

To determine which has the greatest mass between one cubic meter of gold and two cubic meters of copper, we need to compare their densities, as density is the ratio of mass to volume .

Density of gold :The density of gold is 19.3 g/cm³, so we can convert cubic meters to cubic centimeters and multiply by the density to get the mass of one cubic meter of gold: Density of gold = 19.3 g/cm³1 cubic meter = 1000000 cubic centimeters19.3 g/cm³ x 1000000 cubic centimeters = 19300000 grams or 19300 kg

Density of copper: Copper has a density of 8.96 g/cm³, so we can convert two cubic meters to cubic centimeters and multiply by the density to get the mass of two cubic meters of copper: Density of copper = 8.96 g/cm³2 cubic meters = 2000000 cubic centimeters8.96 g/cm³ x 2000000 cubic centimeters = 17920000 grams or 17920 kg.

To learn more about Density:

https://brainly.com/question/29775886

#SPJ11

the state of matter with the least active molecules is

Answers

The gaseous form of matter has the lowest intermolecular forces of attraction.

The particles in a gas have a large amount of space between them and a high kinetic energy. A gas lacks a fixed volume or shape. A gas will expand to fill its container if contained; if unconfined, its particles will disperse indefinitely.

According to NASA's Glenn Research Center, putting a gas under pressure by lowering the capacity of the container reduces the distance between particles and compresses the gas.

The simplest state of matter is the gaseous state, however only 11 of the elements in the periodic table behave as gases at standard temperature and pressure (STP, or 1 atm and 273 K). These are Hydrogen, Nitrogen, Oxygen, Fluorine, Neon, Argon, Krypton, Xenon, Radon.

To know more about gaseous state:

https://brainly.com/question/32664868

#SPJ4

Dangerous elements that can pose health risks to humans, such as cadmium, mercury, selenium, lead, and arsenic are also called
acidic pollutants
heavy metals
toxic aggregates
pathogens

Answers

Dangerous elements that can pose health risks to humans, such as cadmium, mercury, selenium, lead, and arsenic, are also called heavy metals.

The term "heavy metals" refers to a group of elements that have high atomic weights and density. These elements, including cadmium, mercury, selenium, lead, and arsenic, are known to be toxic to humans and can pose serious health risks. Heavy metals have the ability to accumulate in the body over time, leading to various adverse effects on organs and systems. They can interfere with essential biological processes, disrupt enzyme activities, and cause damage to organs such as the liver, kidneys, and nervous system. Exposure to heavy metals can occur through various routes, including contaminated water, air pollution, occupational hazards, and the consumption of contaminated food or products. Due to their toxic nature and potential for harm, heavy metals are regulated and monitored to ensure public health and environmental safety.

learn more about cadmium here:

https://brainly.com/question/29977763

#SPJ11

The greenhouse effect of carbon dioxide is at present greater
than that of water vapor.
True/False

Answers

At present, the greenhouse effect of carbon dioxide is not greater than that of water vapor. Thus, the given statement is false.

The amount of effect that water vapor has on the greenhouse effect is about 40-50 percent while with carbon dioxide, it accounts to 25 percent. The significant difference between them shows the different impacts on the greenhouse effect.

Both of them cause the same effects of heat, however, water vapor being a greenhouse gas is inevitable and natural.  It is much needed for life to sustain on earth, however, the numbers have increased causing an alarming rate of change that may not be good.

To learn more about the greenhouse effect of water vapor:

brainly.com/question/31688319

#SPJ4

Use the periodic table to calculate the molar mass of each compound below. All answers must have 2 decimal places.

Sodium hydroxide (NaOH):
g/mol
Water (H2O):
g/mol
Glucose (C6H12O6):
g/mol
Calcium sulfate (CaSO4):
g/mol
Magnesium phosphate (Mg3(PO4)2):
g/mol

Answers

The molar masses of the compounds are as follows:

Sodium hydroxide (NaOH): 39.99 g/mol. Water (H₂O): 18.

To calculate the molar mass of each compound, we need to determine the atomic masses of the elements in the compound and sum them up according to their respective stoichiometric coefficients.

Sodium hydroxide (NaOH):

The atomic mass of sodium (Na) is 22.99 g/mol, the atomic mass of oxygen (O) is 16.00 g/mol, and the atomic mass of hydrogen (H) is 1.01 g/mol. The stoichiometric coefficients for Na and O are 1, while for H it is also 1.

Molar mass of NaOH = (1 * Na) + (1 * O) + (1 * H) = (1 * 22.99) + (1 * 16.00) + (1 * 1.01) = 39.99 g/mol.

Water (H₂O):

The atomic mass of oxygen (O) is 16.00 g/mol, and the atomic mass of hydrogen (H) is 1.01 g/mol. The stoichiometric coefficient for O is 1, while for H it is 2.

Molar mass of H₂O = (2 * H) + (1 * O) = (2 * 1.01) + (1 * 16.00) = 18.02 g/mol.

Glucose (C₆H₁₂O₆):

The atomic mass of carbon (C) is 12.01 g/mol, the atomic mass of hydrogen (H) is 1.01 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol. The stoichiometric coefficients for C, H, and O are 6, 12, and 6, respectively.

Molar mass of C₆H₁₂O₆= (6 * C) + (12 * H) + (6 * O) = (6 * 12.01) + (12 * 1.01) + (6 * 16.00) = 180.18 g/mol.

Calcium sulfate (CaSO₄):

The atomic mass of calcium (Ca) is 40.08 g/mol, the atomic mass of sulfur (S) is 32.07 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol. The stoichiometric coefficients for Ca, S, and O are 1, 1, and 4, respectively.

Molar mass of CaSO4 = (1 * Ca) + (1 * S) + (4 * O) = (1 * 40.08) + (1 * 32.07) + (4 * 16.00) = 136.14 g/mol.

Magnesium phosphate (Mg₃3PO₄)₂):

The atomic mass of magnesium (Mg) is 24.31 g/mol, the atomic mass of phosphorus (P) is 30.97 g/mol, and the atomic mass of oxygen (O) is 16.00 g/mol. The stoichiometric coefficients for Mg, P, and O are 3, 2, and 8, respectively.

Molar mass of Mg₃(PO₄)₂ = (3 * Mg) + (2 * P) + (8 * O) = (3 * 24.31) + (2 * 30.97) + (8 * 16.00) = 262.86 g/mol.

Therefore, the molar masses of the compounds are as follows:

Sodium hydroxide (NaOH): 39.99 g/mol

Water (H₂O): 18.

for more questions on molar

https://brainly.com/question/837939

#SPJ8

if a neutral atom loses an electron what is formed

Answers

When a neutral atom loses an electron, a positively charged ion, known as a cation, is formed.

An atom consists of a nucleus containing protons and neutrons, surrounded by electrons in energy levels or orbitals. The number of protons in an atom determines its atomic number and defines its identity.

When an atom loses one or more electrons, the positive charge of the protons in the nucleus is no longer balanced by an equal number of negative charges from electrons. As a result, the atom becomes positively charged.

The loss of an electron transforms the atom into a cation. The cation retains its original atomic number and identity but carries a positive charge. The magnitude of the positive charge depends on the number of electrons lost. For example, if a neutral sodium atom (Na) loses one electron, it becomes a sodium cation (Na+), with a positive charge of +1.

Therefore, when a neutral atom loses an electron, a cation, with a positive charge, is formed.

learn more about cation here:

https://brainly.com/question/1626694

#SPJ4

as a plant roots grow they produce weak acids that slowly dissolve rock around the roots. lichens plant like organisms that grow on rocks also produce weak acids

Answers

Both plant roots and lichens have the ability to produce weak acids that slowly dissolve rock in their immediate surroundings.

Plant roots secrete weak acids, such as organic acids, as a part of their growth process. These acids aid in the breakdown of minerals in the soil, facilitating the uptake of essential nutrients by the plants. As roots grow and extend into the soil, the weak acids they release can gradually dissolve minerals present in the rocks surrounding them. Over time, this process can contribute to the weathering and erosion of the rock material.

Similarly, lichens, which are symbiotic organisms consisting of a fungus and an alga or a cyanobacterium, also produce weak acids. Lichens can grow on rocks and other substrates, utilizing their acid-producing capabilities to extract nutrients and minerals from the rocks. The weak acids they release can slowly break down the mineral content of the rocks, contributing to physical and chemical weathering.

Both plant roots and lichens play a role in the process of bioerosion, where living organisms contribute to the breakdown and alteration of rocks. Their production of weak acids enables them to interact with and modify their surrounding environment, albeit on a relatively slow timescale.

To learn more about Plant Roots

brainly.com/question/8647279

#SPJ11

prepare (your own) problem with its correct answer about (chromatography). must continue (calculations) please create a problem by yourself and solve it correctly //Don't copy paste from any sources cause that will not be accepted

Answers

In a chromatography experiment, a mixture of red, blue, and green dyes is separated using a stationary phase and a mobile phase. The stationary phase has a length of 10 cm, and the mobile phase moves at a constant velocity of 2 cm/min. The red dye travels a distance of 6 cm, the blue dye travels a distance of 8 cm, and the green dye travels a distance of 9.5 cm.

What is the retention factor (Rf) for each dye?

Solution:

To calculate the retention factor (Rf) for each dye, we use the formula:

Rf = Distance traveled by the dye / Distance traveled by the mobile phase

For the red dye:

Distance traveled by the dye = 6 cm

Distance traveled by the mobile phase = 10 cm

Rf (red) = 6 cm / 10 cm = 0.6

For the blue dye:

Distance traveled by the dye = 8 cm

Distance traveled by the mobile phase = 10 cm

Rf (blue) = 8 cm / 10 cm = 0.8

For the green dye:

Distance traveled by the dye = 9.5 cm

Distance traveled by the mobile phase = 10 cm

Rf (green) = 9.5 cm / 10 cm = 0.95

Therefore, the retention factors (Rf) for the red, blue, and green dyes are 0.6, 0.8, and 0.95, respectively.

You can learn more about chromatography experiment at

https://brainly.com/question/27007683

#SPJ11

What is formed when atoms join together with a covalent bond?
A.
an ion
B.
a molecule
C.
a neutral atom
D.
a noble gas

Answers

Answer: B. a molecule

Explanation: When atoms join together with a covalent bond, they form a molecule. In a covalent bond, atoms share electrons to achieve a stable configuration, which allows them to form a stable molecule.

Answer:B. A molecule. I hope this helps you

Explanation:

The correct answer is B - a molecule. When atoms join together with a covalent bond, they are sharing electrons with each other to form a stable molecular structure. This can happen between two or more non-metal atoms, and the resulting compound will have a neutral charge. Unlike an ion, which has a charge due to a gain or loss of electrons, a molecule is stable and does not possess an overall charge. Additionally, the bond formed between two atoms is strong and requires energy to break. This is different from a noble gas, which refers to an element that has a full outer shell and therefore does not easily form bonds with other elements.




If the element with atomic number 66 and atomic mass 147 decays by alpha emission. How many neutrons does the decay product have?

Answers

Given the atomic number 66 and the atomic mass 147, the element that meets this criteria is Dysprosium. When Dysprosium decays by alpha emission, it emits a helium nucleus (alpha particle).

The resulting daughter nucleus will have a change in the atomic number of two and atomic mass of four. Hence, the atomic number of the decay product will be 64 (66 - 2) and its atomic mass will be 143 (147 - 4).Therefore, the number of neutrons in the decay product can be calculated by subtracting the atomic number from the atomic mass, so the number of neutrons will be: Number of neutrons = Atomic mass - Atomic number= 143 - 64= 79 neutrons Therefore, the decay product has 79 neutrons.

Read more about atomic number here;https://brainly.com/question/11353462

#SPJ11

Which of the following statements best describes the condition(s) needed for a successful formation of a product according to the collision model?

The collision must involve a sufficient amount of energy, provided from the motion of the particles, to overcome the activation energy.
The relative orientation of the particles has little or no effect on the formation of the product.
The relative orientation of the particles has an effect only if the kinetic energy of the particles is below some minimum value.
The relative orientation of the particles must allow for formation of the new bonds in the product.
The energy of the incoming particles must be above a certain minimum value, and the relative orientation of the particles must allow for formation of new bonds in the product.

Answers

The statement that best describes the condition(s) needed for a successful formation of a product according to the collision model is: The energy of the incoming particles must be above a certain minimum value, and the relative orientation of the particles must allow for formation of new bonds in the product.

According to the collision model of chemical reactions, for a successful formation of a product, several conditions must be met. Firstly, the energy if the colliding particles must be above a certain minimum threshold, known as the activation energy. This energy is required to overcome the energy barrier associated with the reaction and initiate the formation of products.

Additionally, the relative orientation of the colliding particles plays a crucial role. The particles must be properly aligned or positioned to allow for the formation of new bonds in the product. If the particles collide with an unfavorable orientation, it may hinder the formation of the desired product.

learn more about collision model here:

https://brainly.com/question/31277082

#SPJ4

  Draw a representative structure of                                                                                                                                                             a.) Cholesterol                                                                                                                                                                           b.)Cerebroside                                                                                                                                                                           c.)Phospholipid  Image transcription textSample
Acrolein Test
Test for
Test for
(Describe smell)
Unsaturation
Phosphorus
(Number of drops)
(Presence and
color of
precipitate)
Glycerol
Pungent Irritating
Pungent Odor,
Odor
resembling burnt
hamburgers
Coconut Oil
Pungent Irritating
2 drops; pink
Odor
colored solution
Lecithin
Pungent Irritating
Odor
Olive Oil
Pungent Irritating
5 drops; red color
Odor
on top and clear
solution at bottom
0.1% bile
Cholesterol
Pungent Irritating
Odor
Cod liver oil
Pungent Irritating
Odor
Tocopherol
Brain
precipitate 1
Brain
precipitate 2... Show moreImage transcription textCarbohydrates present in lipids as in cerebrosides may be detected using the Molisch
test (see Expt. on Analysis of Carbohydrates)... Show more 

Answers

a. representative structure of Cholesterol is attached

b.   representative structure of Cerebroside is attached

c. representative structure of Phospholipid   is attached

What is a representative structure?

A representative structure is described as molecular representation reduces the dimensionality of a molecular structure into a chemically meaningful format that relays important chemical information.

In the structure of  the Phospholipid, the  phosphate group (P) is attached to two fatty acid chains (R1 and R2) and is polar, while the fatty acid chains are nonpolar.

Learn more about molecular structure  at:

https://brainly.com/question/24174299

#SPJ1

What different methods can be used to create electrodes on a
Borosilicatglass wafer? What additional step has to be performed,
if you want to use a silicon wafer instead?

Answers

The different methods that can be used to create electrodes on a Borosilicate wafer are of standard and thin wall configurations.

The use of standard with filament configuration and thin wall configurations comes in different barrel sizes of one, two, three, five, and seven barrels. The capillaries that line the wall of the glass have the electrodes with the association, if needed, a wire that runs along to the record.

The thin wall single barrel configurations may be fitted with two electrodes. They do not use filings like with the standard configurations.

In order to use a silicon wafer, the additional step that is done is doping. Doping is the introduction of some impurities to the semiconductors to make them more electrically active.

To learn more about Electrodes on Borosilicate glass:
brainly.com/question/31859109

#SPJ4

a capacitance-type fuel quantity indicating system measures fuel in

Answers

A capacitance-type fuel quantity indicating system measures fuel level based on the capacitance of the fuel tanks. It uses an electronic circuit to measure the capacitance and convert it into a fuel quantity reading.

A capacitance-type fuel quantity indicating system is used to measure the amount of fuel in aircraft tanks. It works based on the principle of capacitance, which is the ability of a capacitor to store electrical charge. In this system, the fuel tanks act as the capacitor plates, and the fuel acts as the dielectric material between the plates.

The capacitance of the system is directly proportional to the amount of fuel present in the tanks. By measuring the capacitance, the system can determine the fuel quantity. This is achieved using an electronic circuit that applies a small alternating current to the fuel tanks and measures the resulting voltage.

The measured voltage is then converted into a fuel quantity reading using calibration curves or algorithms. This allows the system to provide accurate and reliable fuel level measurements for aircraft operations.

Learn more:

About capacitance-type fuel quantity indicating system here:

https://brainly.com/question/32497983

#SPJ11

A capacitance-type fuel quantity indicating system measures fuel in terms of the electrical capacitance.

Capacitance is a property of a capacitor, which is an electronic component consisting of two conductive plates separated by an insulating material, called a dielectric. In the context of a fuel quantity indicating system, the capacitance is used to determine the level or amount of fuel in a tank.

The system works based on the principle that the capacitance between the two plates changes as the fuel level inside the tank changes. As the fuel level rises or falls, the distance between the plates, and thus the capacitance, also changes.

This change in capacitance is measured by the system and is correlated to the fuel level.

By calibrating the system with known fuel levels, a relationship can be established between the measured capacitance and the corresponding fuel quantity. This allows the system to accurately indicate the fuel level in the tank.

Capacitance-type fuel quantity indicating systems are widely used in various applications, including aviation, automotive, and industrial sectors, to provide real-time information about fuel levels, enabling efficient monitoring, control, and management of fuel resources.

Learn more about Capacitance from the given link!

https://brainly.in/question/24309521

#SPJ11

What is the freezing temperature of a solution of 115.0 g of sucrose, C12H22O11, in 350.0 g of water, which freezes at 0.0 °C when pure?

(a) Outline the steps necessary to answer the question.
(b) Answer the question.

Answers

The freezing temperature of the solution is -2.65596 °C.

(a) The steps necessary to answer the question:

First, determine the molality of the solution using the formula:molality = moles of solute / mass of solvent (in kg)

Calculate the number of moles of sucrose:moles of solute = mass of solute / molar mass of sucrose

Next, calculate the mass of water:mw = 350.0 g - 115.0 g = 235.0 g

Convert the mass of water to kg:mass of water (kg) = 235.0 g / 1000 g/kg

Finally, use the formula to calculate the freezing point depression:

ΔTf = Kf x molality

where Kf is the freezing point depression constant of water. (1.86 °C/m for water).

Then, use the following formula to calculate the freezing point of the solution:

freezing point of solution = freezing point of pure solvent - ΔTf

(b) To answer the question, we need to use the freezing point depression formula:ΔTf = Kf x molality

where Kf is the freezing point depression constant of water (1.86 °C/m) and molality is the concentration of the solution in moles of solute per kilogram of solvent.moles of solute = mass of solute / molar mass of sucrose= 115.0 g / 342.3 g/mol= 0.3355 molmolality = moles of solute / mass of solvent (in kg)= 0.3355 mol / 0.235 kg= 1.426 m

Now, we can calculate the freezing point depression:ΔTf = Kf x molality= 1.86 °C/m x 1.426 m= 2.65596 °C

The freezing point depression is 2.65596 °C.

To find the freezing temperature of the solution, we subtract this from the freezing point of pure water:freezing point of solution = freezing point of pure solvent - ΔTf= 0.0 °C - 2.65596 °C= -2.65596 °C

Therefore, the freezing temperature of the solution is -2.65596 °C.

Learn more about freezing point at

https://brainly.com/question/8767538

#SPJ11

What can be done to keep the metallic atoms from moving too easily?

sea of mobile electrons
add atoms of different sizes
malleablity

Answers

In order to keep metallic atoms from moving too easily, one can add atoms of different sizes.

Metallic atoms form metallic bonds with compatible atoms that allow them to move around freely. The sea of mobile electrons and malleability will only help in that aspect as it nurtures that property of flow of movement of electrons within the atoms.

The addition of atoms of different presents itself as a physical hindrance that can stop the atoms from moving too easily. It acts as a block. It also prevents the formation of bonds due to incompatibility enhancing the need to keep the atoms from moving too easily.

To learn more about the movement of metallic atoms:

brainly.com/question/29590795

#SPJ4

Identify to which octant the following point belongs in such a way that it satisfies the following conditions: XY<0 , Z<0

Answers

The given point belongs to the octant number IV because it satisfies the given conditions XY<0 and Z<0.

An octant is a part of three-dimensional coordinate plane consisting of points that have one coordinate plane lying on an axis and the remaining two plane coordinates are positive. A cartesian coordinate plane is divided into eight parts by the coordinate axes which are called octants.The following figure illustrates the octants on the 3D coordinate plane. The eight octants in the three-dimensional cartesian coordinate system.The octant number IV contains points with the following characteristics:-

X>0, Y<0, and Z<0

This means that in octant IV, x coordinates are positive, y coordinates are negative and z coordinates are negative.

So, the point which satisfies the conditions, XY<0 and Z<0 will belong to the octant number IV.

To learn more about octant number,

https://brainly.com/question/18917287

#SPJ4

Evaluate the volume of the object as
determined by water displacement.
Measurement 1 (water only) = 9.15 mL
Measurement 2 (water + object) = 19.20 mL
Volume = [?] mL

Answers

Answer:

Explanation: 10.05 mL

To determine the volume of the object using water displacement, we subtract the initial volume (measurement 1) from the final volume (measurement 2).

Volume = Measurement 2 - Measurement 1

Volume = 19.20 mL - 9.15 mL

Volume = 10.05 mL

Therefore, the volume of the object, as determined by water displacement, is 10.05 mL.

how to find the amount of excess reactant left over

Answers

In order to find the amount of excess reactant left over, follow these steps. Write and balance the chemical equation. Determine the stoichiometry, the mole ratio between reactants and products. Identify the limiting reactant, which is consumed first. Calculate the moles of the limiting reactant used.

Moreover, use stoichiometry to find moles of other reactants needed.

Compare this with actual amounts.

The difference is the excess reactant left over.

For example, if 10 moles of A and 15 moles of B are given in the reaction 2A + 3B -> C, B is the limiting reactant.

All 15 moles of B are used, and 10 moles of A are consumed, leaving no excess reactant.

Read more about Reactant left over.

https://brainly.com/question/21151140

#SPJ11

A rigid container holds hydrogen gas at a pressure of 3.5 atm and a temperature of 20 °C.
Part A
What will the pressure be if the temperature is lowered to -20°C?
Express your answer to two significant figures and include the appropriate units.

Answers

Main Answer:

The pressure of the hydrogen gas will be 2.7 atm if the temperature is lowered to -20 °C.

When a gas is held in a rigid container, its pressure is directly proportional to its temperature, assuming the volume remains constant. This relationship is described by the ideal gas law equation, which states that the pressure (P) of a gas is equal to the product of its temperature (T) and its constant volume (V), divided by the ideal gas constant (R). Mathematically, it can be represented as P = (nRT) / V, where n represents the number of moles of gas.

To calculate the new pressure at -20 °C, we need to convert the temperatures from Celsius to Kelvin. Adding 273.15 to 20 °C gives us 293.15 K, and adding 273.15 to -20 °C gives us 253.15 K. Now we can apply the relationship between pressure and temperature.

Using the equation P1/T1 = P2/T2, where P1 and T1 represent the initial pressure and temperature, and P2 and T2 represent the final pressure and temperature, we can solve for P2. Plugging in the values, we have (3.5 atm)/(293.15 K) = P2/(253.15 K). Rearranging the equation to solve for P2, we get P2 = (3.5 atm)(253.15 K) / (293.15 K) ≈ 2.7 atm.

Therefore, if the temperature is lowered to -20 °C, the pressure of the hydrogen gas will be approximately 2.7 atm.

Learn more about Hydrogen gas

brainly.com/question/32820779

#SPJ11

enzymes increase the rate of a reaction by ________.

Answers

Enzymes increase the rate of a reaction by lowering the activation energy.

Enzymes are biological catalysts that facilitate chemical reactions by accelerating the rate at which they occur. One of the primary ways enzymes achieve this is by lowering the activation energy required for the reaction to proceed.

Activation energy is the energy barrier that must be overcome for a chemical reaction to take place. It represents the minimum energy required for the reactant molecules to reach the transition state and form products. By lowering the activation energy, enzymes make it easier for the reactant molecules to attain the necessary energy and overcome the barrier.

Enzymes achieve this by providing an alternative pathway for the reaction that has a lower activation energy.

learn more about Activation energy here:

https://brainly.com/question/27341596

#SPJ4

what family tends to give away 2 electrons when forming a compoind

Answers

Alkaline earth metals tend to give away 2 electrons when forming a compound.

These elements belong to Group 2 of the periodic table and include elements such as beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), and barium (Ba). Alkaline earth metals have two valence electrons in their outermost energy level, and they readily lose these electrons to achieve a stable electron configuration similar to the nearest noble gas. By giving away 2 electrons, alkaline earth metals form 2+ cations, allowing them to combine with other elements to form compounds. This electron donation leads to the formation of ionic compounds, commonly seen in various minerals and materials.

Learn more about Alkaline earth here:

https://brainly.com/question/11584594

#SPJ11

Other Questions
why choice of the type and dimensions of the measuring geometryin TPA are 25mm and 50mm probe can you answer this question Question 29 2 pts Suppese no fiscal policy and instead the Federal Reserve decides to take sction. What woud be the appropriate monetarkecin response? Check all that apply. increwe powermes scencine. Consider the function f(x,y)=x^y.Calculate the following: fx(x,y)= solid alkanes are found on the surface of many fruits and vegetables. true false Which of the following specifies how often a secondary DNS server attempts to renew its zone information?Select one:a. Refresh intervalb. Set intervalc. Update intervald. Retry interval a code war is destructive to the process as well as to the professional immage of all involved departments which program is better? And why?first program use MPI_Recv and MPI_Sendsecond use MPI_Scattervq2) In ArraySum-scatterv.c, if we used MPI_Scatter instead of MPI_Scatterv todistribute the array, what conditions should apply to the code arguments so that the code works? Write a simple program to input three float values(Hint: Use nextFloat() instead of nextlnt()). Calculate the sum, product and average and print the results Sample output: Enter three float values: \( Which conclusion can readers draw about eldred in from the four days night ? A single phase full-wave semi-controlled rectifier is used to control a power of 230V, IkW,DC Heating element (Assume the efficiency of heating element as 90%). if the system is powered by a 230V, 50Hz power supply and the firing angles d of the gate pulses to the SCRs are 60, find the new heating power output of the heating element. 8.30 Region 1, for which , defined by z>0. If B, with the interface. 2.5 6a, is defined by z A 400-V, 3- supply is connected across a balanced load of three impedances each consisting of a 32- resistance and 24 inductive reactance in series. Determine the current drawn from the power supply, if the three impedances and source are: a- Y-connected, and b- -connected. is it easier to add activities to the schedule whenusing bar chart or logic diagram, state 2 reasons why. solve only B1. Design and develop the Simulink model in MALAB for the given output waveform . a) Modelling of block in Simulink b) Interpret the output and shown result Which of the following statements is CORRECT about an individual Disability Income policy? A. Its benefits are taxable. B. It is considered to be a Reimbursement policy. C. It often contains an Elimination period. D. It has a six-month Incontestable clause. A solenoid inductor has 60 turns. When the current is 4 A, the flux through each turn is 50 uWb. What is the induced emf when the current changes at 30 A/s? - Discuss and write the attributes of the class: Student - Identify at-least 20 attributes - Include the data types that represent the attributes - Use proper notations, e.g. - name: string, - age: in Use the Definition to find an expression for the area under the graph offas a limit. Do not evaluate the limit.f(x)=x2+1+2x,3x5limn[infinity] i=1n(x). Find the missing side.N41 15Z=Round to the nearest tenth.Remember: SOHCAHTOA