which of the following is always created when a net torque is applied to a rigid body? i. change in angular velocity ii. rotational equilibrium iii. constant angular velocity iv. constant angular momentum group of answer choices

Force and displacement combine to produce work in physics. The object has a displacement of 36 m and is under the influence of a 10 N force. The work done is then 360 J.

The degree of force required to move a thing a specific distance is referred to as the work done. Essentially, it is a measurement of the amount of energy that is transmitted to or from an item so that it can be moved.

Work is equal to 0 if the body's displacement is normal to the direction of the force. The work performed is negative if the body's displacement is in the opposite direction from the force's direction. Regardless of the displacement direction, work is always positive.

Considering that a force of 10 N was exerted on a weight

displacement occurred

= 40 - 4

= 36 m

Work done = F × ds

ds = 36 m

F = 10 N

W = 10 N × 36m

= 360 J.

Thus, 360 J of work is needed to raise a 10-newton weight form 4.0 m to 40 meters above Earth's surface.

To learn more about work done visit:

https://brainly.com/question/8119756

#SPJ4

The quantity of energy transferred or transformed per unit of time is known as power.

The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.

Power is related to other factors; for instance, the power required to move a ground vehicle is equal to the product of the vehicle's velocity, traction force on its wheels, and aerodynamic drag.

A motor's output power is calculated by multiplying its torque output by the angular velocity of its output shaft.

Therefore, The quantity of energy transferred or transformed per unit of time is known as power.

To learn more about power, refer to the link:

https://brainly.com/question/29575208

#SPJ1

The ball's change in momentum is -1.0 kg*m/s.

What is momentum?

Momentum is the rate of change of an object's velocity. It is calculated by multiplying the object's mass by its velocity. Momentum is a vector quantity, meaning it has both magnitude (size) and direction.

To calculate this, we use the momentum formula, which is p = m*v, where p is momentum, m is mass, and v is velocity.

We can calculate the ball's initial momentum by plugging the mass and velocity into the formula:

p = m*v

p = (0.15 kg)*(8.5 m/s)

p = 1.275 kg*m/s

We can calculate the ball's final momentum by plugging the mass and velocity into the formula:

p = m*v

p = (0.15 kg)*(6.5 m/s)

p = 0.975 kg*m/s

The ball's change in momentum is equal to its initial momentum minus its final momentum:

Δp = p1 - p2

Δp = (1.275 kg*m/s) - (0.975 kg*m/s)

Δp = -1.0 kg*m/s

Therefore, The ball's change in momentum is -1.0 kg*m/s.

To learn more about momentum

Here: https://brainly.com/question/1042017

#SPJ4

(a) The wavelength of the whale's echolocation wave is 1.66 x 10⁻³ m.

(b) The time taken for the reflected sound wave to return is 0.6 second.

The wavelength of the whale's echolocation wave is calculated by applying  the relationship between the speed of sound, wavelength and frequency of sound.

Mathematically, the formula is given as;

v = fλ

where;

λ = v / f

λ = ( 331 ) / ( 200,000 )

λ = 1.66 x 10⁻³ m

The time taken for the reflected sound wave to return is calculated as follows;

v = ( 2d ) / t

t = ( 2d ) / ( v )

where;

t = ( 2 x 100 m ) / ( 331 m/s )

t = 0.6 second

Learn more about wavelength here: https://brainly.com/question/10728818

#SPJ1

Answer:

F = G M1 M2 / R^2

Since F is proportional to 1 / R^2

Quadrupling the distance (R) will reduce the force by

F2 = F1 / 16

"The number of wave crests passing a given point per unit time is given by frequency."

The quantity of vibrations per unit of time is known as frequency, and with each vibration, a wave crest passes through a certain location. Thus, frequency is defined as the number of wave crests that pass a specific spot in a unit of time.

Wave frequency is the quantity of waves that pass a specific place in a predetermined amount of time. the amount of time it takes for two crests to pass one wavelength apart at a certain location. Most of the times, the wave period is expressed in seconds, e.g. one wave every 6 seconds. The unit of frequency is the Hertz.

To know more about waves:

https://brainly.com/question/2478322

#SPJ4

The speed of sound in the pipe is 150m/s and that found to be enhanced when air column is 150 mm long.

a two-pronged metal tool used for tuning musical instruments and determining standard pitch that produces a set tone when struck.

ΔL = 150mm => 0.15m = λ/2

               =>  λ = 2 x 0.15 => 0.3 m

The velocity of sound => frequency x wavelength

                                         500hz x 0.3 m  => 150m/s

The length of a tuning fork's prongs determines the pitch it produces. Each fork has a stamp that says the note it makes (for example, A) and the frequency in Hertz (e.g. 440 Hz). Higher pitch (frequency) noises are produced by shorter prongs than by longer prongs.

Learn more about tuning fork here:

brainly.com/question/3472339

#SPJ4

To find the volume of the object, you need to subtract the initial volume of the graduated cylinder (12.2 mL) from the final volume of the graduated cylinder plus the object (14.5 mL). So the volume of the object = 14.5 mL - 12.2 mL = 2.3 mL

The volume of an object is a measure of the amount of space it occupies. It is typically expressed in units of cubic length, such as cubic meters (m^3), cubic centimeters (cm^3), or milliliters (mL).

The volume of an object can be determined using a variety of methods, depending on the shape and properties of the object. For example, the volume of a solid object can be found by measuring its length, width, and height, and multiplying them together. The volume of a liquid can be found by measuring its mass and density, or by using a graduated cylinder.

Learn more about volume, here:

https://brainly.com/question/14209809

#SPJ1

The combined velocity immediately after the collision is 0 m/s. When two objects collide and lock together, the momentum of the two objects is conserved, meaning the final velocity is equal to 0 m/s.

What is the momentum ?

Momentum is a physics concept that describes the motion of an object in terms of its mass and velocity. It is a measure of an object's inertia, or its resistance to changes in its motion. Momentum is a vector quantity, meaning it has both a magnitude (or size) and a direction. The magnitude of an object's momentum is equal to its mass multiplied by its velocity. Momentum is conserved, meaning it can neither be created nor destroyed, only transferred from one object to another. This property is important in many aspects of physics, including collisions, explosions, and the motion of planets. Momentum is also related to force, as a force applied to an object causes its momentum to change.

To learn more about momentum

https://brainly.com/question/28021242

#SPJ4

A block is supported by a moving piston. Both of the problem's components deal with the crucial scenario in which the highest acceleration equals that of nosedive (2.2Hz).

Amplitude is the separation between the wave's resting position and its highest displacement. Frequency is the number of waves that cross a particular place in a second. Period is the amount of time that it takes for a wave cycle to finish.

It refers to the greatest departure an item in periodic motion can make from equilibrium. As an illustration, consider how a pendulum swings past its market equilibrium straight down and then swings to the furthest point from the center.

To know more about amplitude visit:

https://brainly.com/question/9525052

#SPJ4

Definitely Not, since they are brought closer to one another in this instance, there will be a loss of potential energy as a result of the increased compression of space. As a result, this assertion is untrue.

Potential energy in physics is the energy that an item retains as a result of its position in relation to other objects, internal tensions, electric charge, or other elements.

Potential energy is the energy that is stored in any object or system as a result of its position or component arrangement. The environment outside of the object or system, such as air or height, has no impact on it. In contrast, kinetic energy refers to the energy of moving particles inside a system or an item. Energy that cannot be turned into kinetic energy is known as potential energy. Potential energy is stored energy that is capable of performing work but is not doing so right now.

To learn more about potential energy from given link

https://brainly.com/question/19871303

#SPJ4

Moving electric charges create electric and magnetic fields.

Electricity is the flow of electrical energy or charge through a material. It is a form of energy that comes from a variety of sources, including natural sources such as lightning, or from man-made sources such as batteries, generators, or power plants. Electricity is a fundamental part of modern life, and is used for a variety of purposes, from powering lights, appliances, and machines to providing heat and cooling. It is also used to transmit information over long distances, such as through telephone and internet networks.

Electric fields are created when a moving charge exerts a force on other charges, while magnetic fields are created when a moving charge creates a circular force around itself. Electric and magnetic fields can interact with each other and can cause a force to act on other electric charges.

To learn more about electric
https://brainly.com/question/25923373
#SPJ4

According to the question, To cover a distance of 10 km, jacob runs some of the way at 15 km/h, and walks the rest of the way at 5 km/h.  7.5 km runnng, and .5 km walking is done by jacab.

Regardless of the starting or finishing positions of an object, duration can be characterized by the amount the space it has traveled.

Jacob ran for x hours; consequently, he walked for 1-x hours.

Time x speed = Distance.

15x+ 5*(1-x) =10,

15x+5–5x =10,

10x =5,

x= 0.5 hours.

Jacob therefore ran for thirty minutes and then walked for another thirty minutes.

Let's examine,

15 km/ hr x 0.5 hr

= 7.5 km runnng,

and 5 km/ hr x 0.5 hr

= 2.5 km walking.

To learn more about distance visit:

https://brainly.com/question/15172156

#SPJ4

For a component in a direct current (DC) circuit, reversing the direction of current flow will not affect the current or voltage readings.

However, in an alternating current (AC) circuit, reversing the direction of current flow will affect the voltage reading, but not the current reading.

In a direct current (DC) circuit, the current flows in one direction and voltage remains constant. Therefore, reversing the direction of current flow in a DC circuit will not affect the current or voltage readings. However, in an alternating current (AC) circuit, the current and voltage alternate between positive and negative values. Reversing the direction of current flow in an AC circuit will change the polarity of the voltage, but the current will remain unchanged. The amplitude and frequency of the AC current and voltage remain the same, regardless of the direction of current flow.

To learn more about Direct current, refer:

https://brainly.com/question/29997965

When a spring is distorted by an outside force agent, energy is stored within the spring. The work done and then employed to distort the spring constitutes the spring energy. Its deformation length squared determines how much energy a spring has.

It is the energy held within a compressible or elastic substance, such as a spring, rubber band, or molecule. It also goes by the name elastic potential energy. It is determined by multiplying the movement's force by its distance. Without stretching, or in the typical position, the spring has no energy.

Mechanical energy is the energy held under tension within objects. Rubber bands that have been stretched and compressed are two instances of mechanical energy storage.

To know more about spring energy visit:

https://brainly.com/question/12528339

#SPJ4

The time-dependent voltage across the capacitor is given by VC(t)=VC0sinωt.If R=3kΩ, C=100pF, VC0=100mV, and ω=105rad/s, then the vr is 3 mv.

A capacitor is an electrical component consisting of two conductors separated by an insulator, known as a dielectric, designed to store electrical energy. They are most commonly used in applications such as filters, wave shaping, and energy storage.

Capacitors can store electrical energy in the form of an electrostatic field, which is created between the two conductors when a voltage is applied. The amount of energy stored is directly proportional to the amount of voltage applied, as well as the size of the conductors and dielectric used.

Since the voltage across the capacitor is a sine wave with a maximum amplitude of 100mV and a frequency of 105rad/s, the voltage across the resistor is also equal to 100mV.
Therefore, the voltage across the resistor, VR is equal to 100mV.

capacitive reactance, XC = 1/(w×c)

= 1/(10^5×100×10^-12)

= 10^5 ohms or 100 k ohm

current amplitude through the ckt, I = VCo/XC

= 100×10^-3/(10^5)

= 1×10^-6 A

vR = I×R

= 1×10^-6×3×10^3

= 3×10⁻³ v

= 3 mv

To learn more about capacitor
https://brainly.com/question/27960614

#SPJ4

In light of the aforementioned equations, the rate of spin will double if the skater's rotational inertia is cut in half while spinning.

Rotational inertia is a property of any rotating object. It is a scalar value that describes how difficult it is to change the rotational velocity of an object around a certain rotational axis. Similar to rotational inertia in rotational mechanics, mass plays a similar role in linear mechanics.

Both an object's mass and its distribution of mass in relation to its axis of rotation play a role in rotational inertia. The shape of an object dictates its rotational inertia, unlike other circumstances in physics where we can make things simpler by imagining we have a point mass.

To know more about rotational inertia visit:

https://brainly.com/question/22513079

#SPJ4

Answer:

17m/s

Explanation:

v=u+at

v=5+3*4

v=17m/s

Weight: The weight of the jet plane is exerted upon it because the plane has some mass. The action of the weight is downward.

The Lift or the Normal Force: The lift force is the force that works against the weight of the aircraft to propel it upward in the air. The weight of the plane exerts a normal force that keeps the aircraft in the air.

Thrust: The force that aids in propelling an airplane in the desired direction is known as the thrust force. The jet engine is what generates this force. The plane is propelled forward through the air by this force.

Drag: The differential in velocities between solid things and the air is what produces drag. The jet plane's forward momentum is resisted by the drag force.

Learn more about resistance Visit :brainly.com/question/25997303

#SPJ4

A  β decay particle would be created and would travel along path A.

A beta ray is released from an atomic nucleus during a radioactive decay process known as beta decay. The proton in the nucleus changes from a proton to a neutron during beta decay, and vice versa. The process of a proton into a neutron is called  β+ decay. Similar to this, neutron to proton conversion is referred to as β- decay. Three common emissions come from radioactive decay that occurs naturally. When these emissions were first discovered, scientists couldn't tell them apart from other, well-known particles, so they gave them the names alpha particles, beta particles, and gamma rays. The first three letters of the Greek alphabet were used to name these particles.

Learn more about β- Decay

https://brainly.com/question/23642823

#SPJ4

Option A is correct.

The energy of the violet light emitted by a hydrogen atom with a wavelength of 410.1 nm is  4.85×10−19 J.

The formula to calculate the energy is:

E = hc/λ

Where

E is the energy, h is planck's constant, c is speed of light, and λ is the wavelength.

Putting the values in the formula:

E = 6.63×10^34 × 3.8×10^8/410.1 ×10^9

E = 4.85×10−19 J4.85×10−19 J.

Thus the energy of the violet light emitted by a hydrogen atom with a wavelength of 410.1 nm is 4.85×10−19 J.

If you want to learn more about calculation the energy, click here

https://brainly.com/question/29032879?referrer=searchResults

#SPJ4

The distance between you and deer is 28.75 m, when you come to stop, if the speed of the car is 21 m/s, and reaction time is 0.5 second.

Initial distance between the car and the deer, d = 38 m

Let the initial speed, u = 21 m/s

Reaction time, t = 0.5 sec

Maximum deceleration of the car, a = 10 m/s²

By the second equation of motion,

S = ut + 0.5at²

S = 21 × 0.5 + 0.5 × (-10) × 0.5²

S = 9.25 m

So the distance between the deer and you = 38 - 9.25 = 28.75 m.

--The given question is incomplete, the complete question is "If you are driving in a car at 21 m/s and suddenly a deer appears in front of you at a distance of 38 meter. If your reaction time is 0.5 sec and maximum deceleration of the car is 10 m/s² then what will be the distance between you and deer when you stop the car?"

To know more about deceleration, here

https://brainly.com/question/4403243

#SPJ4

F=qE force employed in charge constant-field situations is charge of ion x force of the E-field. Mass is irrelevant.

What do you mean by charge?

Charge, also known as electric charge, electrical charge, or electrostatic charge and denoted by the symbol q, is a property of a unit of matter that indicates how many more or less electrons than protons it has.

What does the term "charge" in chemistry mean?

An electromagnetic field exerts a force on matter as a result of the physical attribute of charge. Positive or negative charges can exist in an electric field. The substance is regarded as neutral or uncharged if there is no net electric charge present.

To know more about charge visit:

https://brainly.com/question/12550364

#SPJ4

From a Martian point of view, the most notable difference between observing the solar system in a geocentric model versus a heliocentric model would be the relative positions of the planets in the sky. In a geocentric model, the Earth is at the center of the solar system and all the other planets orbit around it. In contrast, in a heliocentric model, the sun is at the center of the solar system and all the planets, including Earth, orbit around it.

If we were observing the solar system from the surface of Mars, we would see the planets from Mars' point of view. In this scenario, the planets would appear to move in the sky in ways that are different from what we observe from Earth. For example, Mars and Earth would appear to be orbiting around the sun at different rates, and thus their relative positions to each other would change over time, but the relative positions of the other planets to the Earth would not change as much as in our heliocentric model.

Additionally, the apparent size and brightness of the planets would also appear different from Mars than they do from Earth. This is due to the fact that the distance between Mars and the other planets is not the same as the distance between Earth and the other planets.

In summary, from a Martian point of view, the relative positions of the planets in the solar system would appear different than what we observe from Earth due to the geocentric model of the solar system and the difference in the distance between Mars and the other planets.

The magnitude of the impulse delivered to your roof is 1.134 x 10⁻⁵ kg.m/s. The magnitude of the average force of the impact is 0.0307 N.

If the force is constant, the impulse of force is created by multiplying the resultant force, F, by the length of this force, t. The impulse of force is what changes the state of motion, which then changes the state of momentum.

a sudden, unplanned tendency for or invitation to certain frequently unreasonable behavior. a predisposition or innate tendency that is frequently irrational. a pulse of excitement that moves through tissues, especially muscles and nerve fibers, and, by observing nerve signals, either stimulates or inhibits physiological action.

Given;

Mass of the raindrop, m = 0.0014 g = 0.0014 x 10⁻³ kg

Speed of the rain, v = 8.1 m/s

Time of motion, t = 0.37 ms

(a) The impulse delivered to the roof is calculated as;

J = ΔP = mv

[tex]J=(0.0014*10^-3)*(8.1)\\J=1.134*10^-5 kg.m/s[/tex]

(b) The magnitude of the force of impact is calculated by applying Newton's second law of motion,

F = ma

[tex]F=\frac{mv}{t}[/tex]

[tex]F=\frac{(0.0014*10^-3)(8.1)}{0.37*10^-3} \\F=0.0307N[/tex]

To know more about force visit:

https://brainly.com/question/12785175

#SPJ4

Due to their smaller size and somewhat weaker gravity than the outer planets, the inner planets were unable to draw significant volumes of gas into their atmospheres.

Gravity, on the other hand, is a force in the broadest sense since it characterizes the resulting interaction between two masses. Both the motion of objects through stretched spacetime and the warping of spacetime are the main origins of gravitational effects. The effect, however, seems to be the consequence of using force.

When he released his general relativity theory in 1915, Einstein discovered the solution. You are drawn toward the ground by gravity because all mass-bearing things, such as the Earth, physically bend and distort spacetime, the fundamental fabric of the cosmos. You experience gravity as a result of that curvature.

To know more about gravity visit:

https://brainly.com/question/14874038

#SPJ4

The change in the momentum of the truck is 80000 kg-m/s. If the truck comes to rest and then reverse its direction.

Momentum(p) of an object is nothing but the product of the mass(m) and the velocity(v). Momentum is used to calculate the applied force by a moving object that changes its state of motion. As the rate of change of momentum is equal to the force. Change of momentum for a very short time is known as the impulse. Momentum is a vector quantity.

Change in momentum(Δp) = initial momentum(p₁) - final momentum(p₂)

Initial momentum, p₁ = 40000 kg-m/s

Final momentum, p₂ = -40000 kg-m/s

Δp = 40000 - (-40000) = 80000 kg-m/s

To know more about momentum, here

https://brainly.com/question/24030570

#SPJ4

The speed of the objects can be obtained as 2.9 m/s.

We have to note that the principle of the transformation if energy is seen to hold here. In the case that we have the elastic potential energy of the spring can be converted into the kinetic energy of the moving objects.

As such we have;

E = 1/2 mv^2

m = mass of the objects

v = speed of the objects

E = energy of the objects

Then we have;

16.8 = 0.5 * (2.5 + 4.0) * v^2
v = √16.8/ 0.5 * (2.5 + 4.0)

v = 2.9 m/s

Learn more about speed:https://brainly.com/question/28224010

#SPJ1

We are expected to determine how often the pendulum swings. About 1.58 Hz/1.58 H z was the swing frequency of the two parakeets.

This is so because the pendulum's swinging motion results from the pull of gravity produced by the magnitude of the earth. The velocity of a pendulum can also be influenced by other elements, such as its length. Advertisement. Background. An object suspended from a fixed location and swinging back and forth due to gravity is known as a pendulum.

The pendulum stretch, among other shoulder stretches, can increase the range of motion, alleviate discomfort, and improve flexibility. This activity has been recommended by your doctor or physical therapist to assist speed

To know more about  pendulum swings visit:

https://brainly.com/question/28751492

#SPJ4

30 metres above the earth, a ball from the a window. Each time the ball bounces, it rises 50% higher than before, which equals 30 + 30 [1 .58] / [1 .5] = 89.76m.

Similar to a spring, the air inside the ball contracts and then expands. A portion of the energy in the ball is transformed into heat during the contact. As a result, the ball launches upwards with much less energy than what it did when it first struck Earth.

All of the kinetic energy must be expended when the ball strikes the ground. Much of it returns to the ball and gives it more power to bounce back into the air, therefore the more the potential energy, kinetic energy, and kinetic energy, more higher the bounce.

To know more about ball bounce visit:

https://brainly.com/question/12999208

#SPJ4