Answer:
Chemists typically investigate questions related to the composition, structure, and properties of matter, as well as its interactions with energy and other substances. Some examples of questions that a chemist might investigate include:
What is the chemical composition of a given substance?
How does the structure of a molecule affect its properties?
How do different chemical reactions occur, and what are the conditions necessary for them to occur?
How do substances interact with one another in solution?
What is the rate at which a chemical reaction occurs, and how can it be influenced by various factors such as temperature, pressure, and concentration?
Explanation:
These are just a few examples of the types of questions that a chemist might investigate. In general, a chemist's research is focused on understanding the underlying principles and processes of matter and energy at the molecular and atomic level.
suppose a student starts with 2.3621 g of a sand mixture and separates the components into 1.3012 g of n a c l , 0.5560 g of s i o 2 , and 0.4503 g of c a c o 3 . based on the amount of recovered s i o 2 , what is the percent of s i o 2 in the starting mixture?
Starting with 2.3621 g of sand, a student divides the mixture into 1.3012 g of naCL, 0.5560 g of siO2, and 0.4503 g of cAcO3. The quantity of recoverable sio 2 So the beginning combination had 21.2066% of silicon dioxide in it.
A residue weighing 1.46g is produced after heating a 1.5 g mixture of SiO2 and Fe2O3 to a high temperature. 3Fe2O32Fe3O4+21O2 is the reaction that causes weight loss. Two double bonds join the two oxygen atoms to the silicon, giving SiO2 its linear structure. On the Si, there aren't any lone pairings. This would represent an instance of sp hybridization. SiO2 is tetrahedral when it is a polymer. SiO2 insulation layers are frequently applied using plasma-enhanced chemical vapor deposition (PECVD), but this method normally needs a relatively high deposition temperature of about 300 C.
Learn more about sand here:
https://brainly.com/question/8165420
#SPJ4
What term describes the electrolyte capacity of pyridine, which partially dissociates in water? C5H5N
Weak electrolyte
Non-electrolyte
Strong electrolyte
Answer:
Weak electrolyte
Explanation:
Weak Bases: NH3, C5H5N etc
The term that describes the electrolyte capacity of pyridine (C₅H₅N), which partially dissociates in water, is a weak electrolyte.
A weak electrolyte is a substance that partially dissociates into ions when dissolved in a solvent, typically water. Unlike strong electrolytes that completely ionize, weak electrolytes only undergo a partial ionization, resulting in a lower concentration of ions in the solution.
In the case of pyridine, it undergoes a partial dissociation in water, producing a small concentration of ions. This means that it conducts electricity to a lesser extent compared to a strong electrolyte, which undergoes complete dissociation and produces a higher concentration of ions.
Therefore, pyridine can be classified as a weak electrolyte.
Learn more about electrolyte from the link given below.
https://brainly.com/question/29045708
#SPJ2
If a 3.0g sample of ground water contains 1.1 x 10^-5g of arsenic(As), what is the concentration of As in ppm?
The concentration of arsenic in the groundwater sample is 36.67 ppm.
What is arsenic?Arsenic is a chemical element with the symbol As and atomic number 33. It is a metalloid, meaning it has properties of both metals and nonmetals. Arsenic is commonly found in the earth's crust and is present in various minerals and rocks.
The concentration of arsenic in the groundwater sample can be expressed in parts per million (ppm) as follows:
ppm = (mass of arsenic/mass of water sample) x[tex]10^6[/tex]
The mass of the water sample is 3.0g, so the mass of arsenic is 1.1 x [tex]10^-5g.[/tex]
ppm =[tex](1.1 x 10^-5g / 3.0g) x 10^6[/tex]
ppm [tex]= (0.00011 / 3) x 10^6[/tex]
ppm = 36.67
Therefore, the concentration of arsenic in the groundwater sample is 36.67 ppm.
To learn more about arsenic visit:
brainly.com/question/13874165
#SPJ1
What is the atom number for He
Answer:
2
Explanation:
Answer:
2
Explanation:
Write a balanced equation for the reaction between nitric acid HNK3 and ZnOH2
Answer:
Explanation:
The balanced equation for the reaction between nitric acid (HNO3) and Zinc Hydroxide (Zn(OH)2) is:
2 HNO3 + Zn(OH)2 -------------> Zn(NO3)2 + 2 H2O
This reaction produces Zinc Nitrate (Zn(NO3)2) and water (H2O) as products. The coefficients in front of each element ensure that there are the same number of atoms of each element on both sides of the equation.
Observation when separating iron filings, sand and salt
which of the following correctly describes the reaction? responses the decomposition of n2o5 is a zero-order reaction. the decomposition of n 2 o 5 is a zero-order reaction. the decomposition of n2o5 is a first-order reaction. the decomposition of n 2 o 5 is a first-order reaction. the decomposition of n2o5 is a second-order reaction. the decomposition of n 2 o 5 is a second-order reaction. the overall reaction order is 3.
The decomposition of N2O5 is a first-order reaction. First-order reaction is an accurate description of the N2O5 decomposition process.
The rate of a first-order reaction is one in which the concentration of a single reactant raised to the power of one determines the rate of the reaction. It is discovered that the rate of N2O5 breakdown is exactly related to the concentration of N2O5. A second-order reaction is one in which the rate of the reaction is proportional to the concentration of the reactant raised to the power of two, as opposed to a zero-order reaction in which the rate of the reaction is independent of the reactant concentration.
The orders of each reactant in the rate equation are added to get the overall reaction order, which in this case would be one (first-order).
learn more about reaction here:
https://brainly.com/question/28984750
#SPJ4
A sample of CHC1₂() was exposed to a constant source of heat for a period of time. The graph above shows the change in the temperature of the sample as heat is added. Which of the following best describes what
occurs at the particle level that makes segment D longer than segment 87
A The specific heat capacity of the liquid is significantly higher than that of the sold, because the particles in the liquid state need to absorb more thermal energy to increase their average speed
The specific heat capacity of the soild is significantly higher than that of the gas, because the particles in the solid state need to absorb more thermal energy to increase their average speed.
The enthalpy of fusion is greater than the enthalpy of vaporization, because separating molecules from their bound crystalline state requires more energy than separating molecules completely from the
liquid state
The enthalpy of vaporization is greater than the enthalpy of fusion, because separating molecules completely from the liquid to form a gas requires more energy than separating molecules from ther
bound crystalline state to a liquid state
The enthalpy of vaporization is greater than the enthalpy of fusion, because separating molecules completely from the liquid to form a gas requires more energy than separating molecules from their bound crystalline state to a liquid state.
Because it takes more energy to entirely separate molecules from a liquid to produce a gas than to move them from their bonded, crystalline state to a liquid state, the enthalpy of vaporisation is greater than the enthalpy of fusion.
What is Enthalpy?
Enthalpy is a measure of the total energy of a thermodynamic system, including both its internal energy and the product of its pressure and volume. It is represented by the symbol H and is often used in the context of chemical reactions or changes in state of matter. Enthalpy changes can be used to measure the heat absorbed or released in a reaction or process.
Segment D is longer than segment 87 because it takes more energy to vaporize a substance than to melt it. In segment D, the substance is changing from a liquid to a gas, which requires more energy (enthalpy of vaporization) than in segment 87, where the substance is changing from a solid to a liquid (enthalpy of fusion).
Learn more about Enthalpy from given link
https://brainly.com/question/14047927
#SPJ1
the free-base form of cocaine has a solubility of 1.00 g in 6.70 ml ethanol (ch3ch2oh) . calculate the molarity of a saturated solution of the free-base form of cocaine in ethanol. express your answer to three significant figures and include the appropriate units.
The molarity of a saturated solution of the free-base form of cocaine in ethanol is 0.49M if it has a solubility of 1.00 g in 6.70 ml ethanol.
Given the mass of free-base form of cocaine = 1g
The volume of ethanol = 6.70mL
Molarity is calculated as moles of solute divided by the volume of solution
We know that Volume of solute + Volume of solvent gives Volume of solution.
Moles of solute cocaine ([tex]C17H21NO4[/tex]) = mass of cocaine/molar mass
moles = 1/303.353 = 0.00330 mol [tex]C17H21NO4[/tex]
Volume of solution = 6.7/1000 = 0.0067 L
Then the molarity = 0.00330/0.0067 = 0.49 mol/L or 0.49 M
To learn more about molarity click here https://brainly.com/question/8732513
#SPJ4
if an excess of reducing agent is added, how many moles of diphenylmethanol can be produced from one mole of benzophenone?
Only, one mole of diphenylmethanol can be produced from one mole of benzophenone.
The reaction of benzophenone with a reducing agent (such as sodium borohydride) can produce diphenylmethanol according to the following balanced chemical equation:
C₁₃H₁₀O + 2NaBH₄ + 2H₂O → C₁₃H₁₄O + 2NaBO₂ + 4H₂
From the balanced equation, we can see that one mole of benzophenone (C₁₃H₁₀O) reacts with two moles of NaBH₄ and two moles of water to produce one mole of diphenylmethanol (C₁₃H₁₄O) and two moles of NaBO₂ and four moles of hydrogen gas (H₂).
If an excess of reducing agent is added, it means that there is more than enough NaBH₄ to react with all of the benzophenone present. In this case, the limiting reagent is benzophenone, and the amount of diphenylmethanol that can be produced is determined by the amount of benzophenone available.
Therefore, from one mole of benzophenone, we can produce one mole of diphenylmethanol when an excess of reducing agent is added.
To know more about benzophenone here
https://brainly.com/question/17566761
#SPJ4
the electron configruration of an atom in the ground state is 2-4 the total number if occupied principal energey levels im this atom is
Answer:
2 energy levels
Explanation:
an employment situation that pays bills but os largley unfluffing is?
Select all the correct answers.
Some chemical reactions absorb energy rather than release it. Which of these phenomena are caused by chemical reactions that absorb energy?
A) Plants use sunlight and atmospheric gases make food.
B) A person activates a cold pack by hitting it against a surface.
C) A rechargeable battery is plugged in to charge.
D) Heat is used to separate a compound into its elements.
PLEASE BE ACCURATE!! Thank you so much!!:)
Answer:
B) A person activates a cold pack by hitting it against a surface.
C) A rechargeable battery is plugged in to charge.
D) Heat is used to separate a compound into its elements.
Explanation:
Chemical reactions that absorb energy are called endothermic reactions. Endothermic reactions absorb energy in the form of heat, light, or electricity, which causes the temperature of the system to decrease.
A) Plants use sunlight and atmospheric gases to make food through photosynthesis, which is an endothermic reaction that absorbs energy in the form of light.
B) A person activates a cold pack by hitting it against a surface, which triggers an endothermic reaction that absorbs heat from the surroundings, causing the cold pack to become cold.
C) A rechargeable battery is plugged in to charge, which involves an endothermic reaction that absorbs electrical energy, converting it into chemical energy that is stored in the battery.
D) Heat is used to separate a compound into its elements through heating, which is an endothermic reaction that absorbs heat from the surroundings, causing the temperature of the system to decrease.
ALLEN
The giant crushers lifted the boulders and quickly _________ them into a uniform gray powder.
The giant crusher lifted the boulders and quickly pulverized them into a uniform gray powder.
Pulverization is defined as the process of applying an external force to a solid material of a certain size to destroy it and reduce it into pieces that are smaller than the original size. It has long been done for many materials including ore, glass, ceramics, grains, paints and medicines. The purpose of pulverization are for the pretreatment for separation of active ingredients, production of powder with particle size suitable for the purpose, surface modification of particles, formation of particles composites and the pretreatment of material synthesis. It is being used not only for reducing particle size but also as an operation for developing new materials.
To learn more about Pulverization please visit:
https://brainly.com/question/28964957
#SPJ4
What is the ground state configuration of calcium CA ?
The ground state electronic configuration for calcium is 1s²2s²2p⁶3s²3p⁶4s².
The electron configuration of an element usually describes how electrons are distributed among its atomic orbitals. Electron configurations of atoms follow a standard notation in which all electron-containing atomic subshells (with the number of electrons they hold is written in superscript) and are placed in a sequence.
Electronic Configuration is also defined as the distribution of electrons in the various available orbitals of an atom of an element. The sequenced in which the electron occupy the various orbitals is given as follows: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.. and so on.
Hence, the electronic configuration for calcium is given as 1s²2s²2p⁶3s²3p⁶4s².
Learn more about electronic configuration from the link given below.
https://brainly.com/question/29415137
#SPJ4
A 20.0 mL sample of 0.150 M KOH is titrated with 0.125 M HClO4 solution. Calculate the pH after the following volumes of acid have been added.a) 20.0mLb) 21.5mLc) 24.0mLd) 26.5mLe) 29.0 mL
The pH values after the given volumes of acid have been added are: a) 12.18, b) 12.39, c) 11.78, d) 11.25, and e) 10.79.
To solve the problem, we need to use the balanced chemical equation for the reaction between KOH and HClO4:
KOH + HClO4 -> KClO4 + H2O
At the start of the titration, before any HClO4 has been added, we have a solution of KOH with a concentration of 0.150 M. We can use this concentration to calculate the initial concentration of hydroxide ions in the solution:
[OH-] = 0.150 M
a) Before any HClO4 has been added, the volume of the solution is 20.0 mL. At this point, no HClO4 has reacted with the KOH, so the concentration of OH- ions is still 0.150 M. To calculate the pH, we can use the formula for the dissociation constant of water:
Kw = [H+][OH-] = 1.0 x 10^-14
pH = -log[H+]
[H+] = Kw/[OH-] = 6.67 x 10^-13 M
pH = -log(6.67 x 10^-13) = 12.18
b) After 1.5 mL of HClO4 has been added, the volume of the solution is 21.5 mL. The moles of HClO4 added is:
0.125 mol/L x 0.0015 L = 1.875 x 10^-5 mol
The moles of KOH initially in the solution is:
0.150 mol/L x 0.020 L = 0.003 mol
Thus, the moles of KOH remaining after reaction with HClO4 is:
0.003 mol - 1.875 x 10^-5 mol = 0.00298125 mol
The total volume of the solution is 21.5 mL, so the new concentration of KOH is:
0.00298125 mol / 0.0215 L = 0.1387 M
Using this concentration, we can calculate the concentration of OH- ions:[OH-] = 0.1387 M
Using the same formula for Kw and pH as before, we find that:
[H+] = 4.06 x 10^-13 M
pH = -log(4.06 x 10^-13) = 12.39
c) Repeating the above process for a volume of 24.0 mL gives:
[H+] = 1.64 x 10^-12 M
pH = -log(1.64 x 10^-12) = 11.78
d) For a volume of 26.5 mL:
[H+] = 5.67 x 10^-12 M
pH = -log(5.67 x 10^-12) = 11.25
e) For a volume of 29.0 mL:
[H+] = 1.63 x 10^-11 M
pH = -log(1.63 x 10^-11) = 10.79
To learn more about dissociation constant Click here:
brainly.com/question/28197409
#SPJ4
radium phosphate reacts with sulfuric acid to form radium sulfate and phosphoric acid. what is the coefficient for sulfuric acid when the equation is balanced using the lowest, whole-numbered coefficients?
After balancing the chemical equation, we have 4 sulfate groups on each side, so the equation is balanced. Therefore, the coefficient for sulfuric acid is 4.
The balanced chemical equation for the reaction between radium phosphate and sulfuric acid is:
Ra3(PO4)2 + 3 H2SO4 → 3 RaSO4 + 2 H3PO4
To balance the equation, we need to ensure that the number of atoms of each element is the same on both sides. We can start by balancing the phosphorus (P) and sulfur (S) atoms, which appear only in one compound on each side. We can see that there are 2 P atoms and 8 O atoms on the left side, and 2 P atoms and 12 O atoms on the right side, so we need to add 4 H3PO4 on the left side to balance the P and O atoms. This gives us:
Ra3(PO4)2 + 3 H2SO4 → 3 RaSO4 + 4 H3PO4
Now we have to balance the hydrogen (H) and the sulfate (SO4) atoms. On the left side, we have 12 H atoms (from the 4 H3PO4) and 6 SO4 groups (from the 3 H2SO4), while on the right side we have 8 H atoms (from the 4 H3PO4) and 3 SO4 groups (from the 3 RaSO4). To balance the hydrogen atoms, we need to add 4 H2SO4 on the left side, which gives us:
Ra3(PO4)2 + 4 H2SO4 → 3 RaSO4 + 4 H3PO4
Now we have 4 sulfate groups on each side, so the equation is balanced. Therefore, the coefficient for sulfuric acid is 4.
Learn more about coefficient here:
https://brainly.com/question/28294176
#SPJ4
The Question:
A 1.80 x 104 mg block of metal has the following dimensions: 0.5839 inches by 0.531 inches, by 0.4981 inches.
Determine the density of the block in g/cm3 using the following exact conversions: 2.54 cm = 1 in; 1000 mg = 1 g.
Use the list of metals below and their respective densities to determine the metal's identity.
Given:
Titanium= 4.54 g/cm3
Zinc= 7.13 g/cm3
Tin = 7.31 g/cm3
Nickel = 8.9 g/cm3
I urgently need help with this
The density of the block in g/cm3 would be 7.11 g/cm3. and the metal's identity would be zinc.
Density calculationDensity = mass/volume
Mass of the metal = 1.80 x [tex]10^4[/tex] mg = 1.80 x [tex]10^4[/tex] mg/1000 = 18 g
Dimension of the metal = 0.5839 inches by 0.531 inches by 0.4981 inches
0.5839 inches = 0.5839 x 2.54 = 1.4831 cm
0.531 inches = 0.531 x 2.54 = 1.3487 cm
0.4981 inches = 0.4981 x 2.54 = 1.2652 cm
Volume of the metal = 1.4831x1.3487x1.2652 = 2.5307 cm3
Density of the metal = 18/2.5307 = 7.11 g/cm3
In other words, the density of the metal is 7.11 g/cm3. The metal is likely to be Zinc.
More on density can be found here: https://brainly.com/question/29775886
#SPJ1
Select the term that correctly describes a chemical reaction that favors one possible structural isomer over one or more other structural isomers.
A. Stereogeneic
B. Stereoselective
C. Regioselective
D. Regiogenic
A chemical reaction that prefers one potential structural isomer over one or more other structural isomers is accurately referred to as stereoselective.
One stereoisomer from a variety of stereoisomers interacts in a stereoselective reaction. Additionally, a reaction that, although it has the potential to yield two or more stereoisomers, only ever yields one stereoisomer.
The overall reaction is referred to as stereoselective if more than one reaction between a group of reactants may take place under the same circumstances, producing products that are stereoisomers, and if one product forms in larger proportions than the others.
Occasionally, the phrase "stereospecific" is used to denote "100% stereoselective" (cf. regiospecific). It is advised to avoid using the phrase stereospecific to signify 100% stereoselective because the term's original definition is different.
Learn more about Stereoselective here:
https://brainly.com/question/14610139
#SPJ4
Why do ionic compounds need to reach stability in their charges?
Answer:
Ionic compounds need to reach stability in their charges because they are composed of ions, which are atoms or molecules that have gained or lost electrons. The positive and negative charges within an ionic compound must balance out in order to achieve stability. If the charges are not balanced, the compound will be unstable and will tend to react with other ions or molecules in an attempt to reach a state of stability. This is why ionic compounds form crystal lattices, with each ion arranged in a specific position in the lattice so that the positive and negative charges are evenly balanced.
Explanation:
Tell me if you still confuse
ALLEN
in a trial, a .300 m solution of no had a new molarity of 0.156 after 500 seconds. what is the rate of formation of n2 (in mol/l*s)?
In a trial, a 0.300 m solution of N[tex]_2[/tex] had a new molarity of 0.156 after 500 seconds. Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].
What is rate of reaction?The reaction rate or rate of reaction is the rate at which a chemical reaction occurs, defined as proportional to the rise in product concentration per unit time and the reduction in reactant concentration per unit time.
The speeds of reaction might vary greatly.
rate of formation of N[tex]_2[/tex] = change in concentration/ change in time
=0 .300 - 0.156 /0- 500
=0.15/500
=0.0003mol /l× s
Therefore, 0.0003mol /l× s is the rate of formation of N[tex]_2[/tex].
To learn more about rate of reaction, here:
https://brainly.com/question/8592296
#SPJ1
convert 24g of NaCk to formula units
Answer:
Explanation:
In the case of NaCl
Formula units, also known as formula mass, are the simplest repeating unit in a chemical compound. For a salt like sodium chloride (NaCl), one formula unit would be one Na+ ion and one Cl- ion.
For sodium chloride, the formula mass is the sum of the atomic masses of the individual atoms in the formula unit, which is approximately 58.44 g/mol.
In the case of NaCl, 24 g would be equivalent to approximately 0.41 moles. Since one formula unit of NaCl weighs 58.44 g, then 0.41 moles of NaCl would be equal to approximately 0.41 moles * 6.022 x 10^23 formula units = 2.47 x 10^23 formula units.
Therefore, 24 g of NaCl would be equal to approximately 2.47 x 10^23 formula units.
Is the disaccharide made from a glucose linked to a fructose?
Sucrose is the carbohydrates that disaccharide made from a glucose which is linked to a glucose named fructose.
Carbohydrates are one of the macro minerals, along with protein and fat, that give the energy necessary for the body to perform all it's diurnal functions. There are two general types of carbohydrates called simple carbohydrates and complex carbohydrates.
Simple carbohydrates are broken down by the body veritably snappily into glucose for energy, and complex carbohydrates have longer chains of glucose motes and thus take longer to digest.
Polysaccharide comes from word “ poly ” which means numerous. Polysaccharides formed of long chains or numerous motes of monosaccharides. It includes bounce, cellulose, glycogen.Two motes of a simple sugar that are linked each other form a disaccharide. One of the most common disaccharides is sucrose( known as table sugar), which is composed of one glucose and one fructose patch. Maltose is composed of two glucose motes, while lactose( milk sugar) is synthesized by glucose and galactose.Monosaccharides or simplest sugar is a structure blocks of carbohydrates. They're glucose, galactose and fructose.Learn more about Types of carbohydrates:
https://brainly.com/question/30624787
#SPJ4
in going from room temperature (25 c) to 10 c above room temperature, the rate of reaction triples. calculate the activation energy for the reaction .
Answer: Ea=5.29 × 10⁴ J/mol
Explanation:In going from 25 °C (298 K) to 35 °C (308 K), the rate of the reaction doubles. Since the rate of the reaction depends on the rate constant (k), this implies that the rate constant doubles. We can find the activation energy (Ea) using the two-point form of the Arrhenius equation.
Explanation:
Matter is anything that has mass and………
O energy
O volume
O gravity
O plasma
a compound with a molar mass of about 42 g/mol contains 85.7% carbon and 14.3% hydrogen by mass. what are the empirical and molecular formulas for this compound?
A substance that is only made up of carbon and hydrogen has a mass composition of 85.7% c and 14.3% h. The compound's empirical formula is CH₂.
An empirical formula is a chemical formula for a compound that only specifies the proportions of the components present rather than the exact number of atoms.
The empirical formula for molecules is the most straightforward iteration of the molecular formula. To find this, divide each subscript in the formula by its lowest common denominator.
Atomic mass number % is the easiest formula to use to calculate an element's percentage in relation to the number of atoms.
With a density of 85.7 and an atomic mass of 12, carbon has a mass number of 7.141.
Hydrogen has a mass of 14.3 and
an atomic mass of 1 = 14.3 / 1 = 14.3²
As a result, the compound's empirical formula is C₁H₂= CH₂.
Learn more about Empirical formula here
https://brainly.com/question/7989775
#SPJ4
true or false. all liquid and precipitate waste will be placed in a glass bottle waste container in the fume hood. however, cu and mg waste will be placed in the solid waste container.
The statement "all liquid and precipitate waste will be placed in a glass bottle waste container in the fume hood. However, Cu and Mg waste will be placed in the solid waste container" is generally true and reflects standard practices in laboratory waste disposal.
In the laboratory, it is important to properly dispose of any waste generated during experiments in order to minimize environmental impact and ensure safety. Liquid and precipitate waste is typically collected in glass bottles, which are more suitable for containing such materials and can be more easily recycled. Glass is also more chemically resistant and less likely to react with the waste materials compared to plastic containers. Furthermore, waste containers should be placed in the fume hood to prevent exposure to any harmful fumes and to minimize any risk of explosion or fire.
On the other hand, solid waste containers are typically used for the disposal of any solid waste materials generated during experiments, such as Cu and Mg waste. Copper (Cu) and magnesium (Mg) are metals that are often used in laboratory experiments and can produce solid waste materials. These solid waste materials can be safely disposed of in a solid waste container, which can be emptied and disposed of as general waste.
It is important to note that laboratory waste disposal practices may vary depending on the specific institution or laboratory. Some laboratories may have their own specific guidelines for waste disposal that should be followed. Additionally, some materials may require special handling or disposal procedures, such as hazardous or radioactive waste. In such cases, additional precautions may be necessary to ensure proper disposal and minimize potential risks to health and the environment.
In conclusion, proper disposal of laboratory waste is essential to maintain a safe and sustainable working environment. Collecting liquid and precipitate waste in glass bottles in the fume hood and solid waste in a designated container, such as Cu and Mg waste, are standard practices in laboratory waste disposal. Laboratories should establish clear guidelines for waste disposal and ensure that all personnel are trained and follow proper waste disposal procedures to ensure safety and environmental responsibility.
To know more about precipitate: https://brainly.com/question/18109776
#SPJ4
What is the temp range of Hanna pH temp probe?
The temp range of Hanna pH temp probe lies between -5.0 to 105.0°C.
According to the new definition of temperature, according to the General Conference on Weights and Measures, is: "The kelvin, symbol K, is the SI unit of thermodynamic temperature and its magnitude is set by fixing the numerical value of the Boltzmann constant to be equal to exactly 1.380649 × 10-23... J K-1 [joules per kelvin].
Hence, the temperature range of Hanna pH temp probe lies between 5.0 to 105.0°C. Simultaneous pH and temperature measurements is done in a large dual-line LCD display. Automatic pH calibration at one or two points within two memorized buffer sets (standard or NIST) is selectable temperature unit (°C).
Learn more about temperature from the link given below.
https://brainly.com/question/14455512
#SPJ4
2 KCIO3 = 2 KCI + 3 O2
If 12.0 grams of potassium chlorate decompose, how many grams of potassium chloride will be
produced? Round your answer to the nearest hundredths.
Answer:
7.30g Potassium Chloride (KCl)
Explanation:
You are given 12.0 grams of KClO3, so start with that!
12g KClO3[tex]\frac{12g KClO3}{ } \frac{1 mol KClO3}{122.55g} \frac{2 mol KCl}{2 mol KClO3} \frac{74.55g KCl}{1 mol KCl} = 7.299877601[/tex]≈7.30
Describe 3 ways students dispose of garbage at your school
Answer:
Make Recycle Bins Easily Accessible
Ditch Single-Use Waste
Minimise Paper Waste
Designate a Drawer for Scrap Paper
Eco-Friendly Lunches
