Which of the following reactions would result in decreased entropy?
Q A. CO,(s) → CO2(g)
OB. H₂O(g) → H₂O()
OC. 203(g) → 30₂(g)
D. N₂204(g) → 2NO₂(g)

Answers

Answer 1

The reaction that would result in decreased entropy is : ( A ) CO(s) → CO2(g)

What are Endothermic reactions

Reactions that absorb heat from its surroundings are known as endothermic reactions, Endothermic reactions result in a decreased entropy as the temperature of the surrounding becomes lower than the temperature of the container where the reaction occurs.

Examples of endothermic reactions are : melting and evaporation which results in the change of state from solid to liquid or from solid to gaseous state.

Hence we can conclude that The reaction that would result in decreased entropy is : ( A ) CO(s) → CO2(g)

Learn more about endothermic reactions : https://brainly.com/question/10508226

#SPJ1


Related Questions

Energy associated with the flow of electrons is?

Answers

electrical current.

Answer:

Electric current

Definition:

The time rate of flow of electric charge, in the direction that a positive moving charge would take and having magnitude equal to the quantity of charge per unit time: measured in amperes.

Electricity is the flow of electrons. Where do these electrons come from? How are they put into circulation and what happens to them?

Everything begins inside in the battery. The battery's zinc metal undergoes oxidation; here is where the flow of electrons into the conductors begins. Electrical field attraction will lead the wire's existing electrons to move towards the battery's positive terminal, and the loose electrons caused by the zinc metal will begin to fill the wire's empty spaces. process continues until the zinc metal's oxidation ceases. At rechargeable batteries, the oxidation-reduction process is also reversed by charging the battery, allowing the stored electrons in the positive terminal to flow back to the zinc metal's negative terminal.

#SPJ2

Calculate the percent covalent character of a chemical bond between iodine and lithium.

Answers

Answer:

27966692

Explanation:

I don't know if this is right or not

There are two common oxides of copper; one is 80% copper and the other is 89% copper by weight. Calculate the formula and name each compound.

Answers

80% copper (Cu)

Cu: 80 :  63.546 = 1.259

O: 20 : 16 = 1.25

Cu:O = 1 : 1

the formula: CuO

89% copper (Cu)

Cu: 89 :  63.546 = 1.4

O: 11 : 16 = 0.6875

Cu:O = 2:1

the formula: Cu₂O

. What is the relationship between the speed of impact and the dropping height?

Answers

The relation between the speed of impact and the dropping height is

[tex]\rm h =\dfrac{1}{2g}v^2[/tex]

What is Speed of Impact ?

It is defined as the speed of an object when it falls from a height  and makes an impact with the ground or any other object.

As the object is falling from the height , its velocity will be continuously changing

Assuming it has no initial velocity , u = 0

let the final velocity is  [tex]\rm v_f[/tex] = [tex]\rm \sqrt {2gh}[/tex]

the potential energy at the height  h as  mgh

the kinetic energy when it reaches the bottom as  [tex]\rm \dfrac{1}{2}mv^2[/tex]

As the energy is always conserved

 [tex]\rm mgh = \dfrac{1}{2}mv^2[/tex]

[tex]\rm h =\dfrac{1}{2g}v^2[/tex]

This is the relation between the speed of impact and the dropping height.

To know more about Speed of Impact

https://brainly.com/question/15339245

#SPJ1

Which of the following is NOT an example of combustion occurring?
A. A car engine
B. A rocket lifting off
C. Battery acid burning the floor
D. A bonfire

Answers

Answer:

C. Battery acid burning the floor

Explanation:

C. Battery acid burning the floor

in combustion fire is created

Battery acid burning the floor is NOT an example of combustion occurring.

The answer is option C.

What is combustion?

Combustion is a chemical process or a reaction between the gas (Hydrocarbon) and Oxygen. while gasoline and oxygen react it releases warmth and light energy. heat and light energy then result in the flame. So, the system for Combustion reaction is Hydrobcarbon + Oxygen = warmness electricity.

Combustion in daily existence examples is: Burning of wooden or Coal for the family functions. Burning of Petrol or Diesel for using vehicles like vehicles. Combustion of herbal gas or LPG.

Learn more about combustion here:-https://brainly.com/question/25141046

#SPJ2

How many moles of LiCl will I have if I start off with .425 moles of CaC12?

Answers

LiOH+CaCl_2—»LiCl+Ca(OH)_2

Balanced

Moles of CaCl_2=0.425mol

1 mol CaCl_2 producees 1 mol LiCl

Moles of LiCl

0.425(1)0.425moles

The equation is

[tex]\\ \tt{:}\dashrightarrow LiOH+CalCl_2\longrightarrow LiCl+Ca(OH)_2[/tex]

This is balanced

1mol of LiCl needs 1 mol CaCl_2

Then

0.425mol of CaCl_2 will produce 0.425mol LiCl

The liquids having same boiling point cannot be seperated from its mixture by distillation, why?​

Answers

Answer:

Explanation:

They cannot be separated by distillation since it depends on a liquid's ability to boil at a certain temperature. If you have two liquids with the same boiling temperatures, the proportion of each in the vapor phase will be about equal, making it impossible to separate them. Although they presumably do not have the same freezing point, you might use a different method like chromatography or work with their freezing points instead. You could then selectively crystallize one component while leaving the other as a pure liquid.

____________

Definitions:

Distillation:

#1: The volatilization or evaporation and subsequent condensation of a liquid, as when water is boiled in a retort and then the steam is condensed in a cool receiver.

Answer:

Because different compounds often have different boiling points, the components often separate from a mixture when the mixture is distilled. The boiling point is the temperature at which the vapor pressure of the liquid phase of a compound equals the external pressure acting on the surface of the liquid.

Explanation:

A, B, C, or D, thanks for the help

Answers

According to the label the true statement about the following substance is option c. It does not pose a health risk

What are lab labels ?

Specially designed labels with particularly specialised adhesive qualities are called "lab labels." In the pharmaceutical or medical industry, as well as in laboratories, they are used for labelling. For the labelling of tubes, test tubes, blood bags, and other types of vessels, special laboratory labels are created.

Labels on chemicals

The identify of the hazardous chemical(s) in the container (for example, chemical name) and the dangers present must both be listed on this label. This warning about hazards can be distributed in a variety of ways. Employers want to choose a solution that will function in each place.

The following label indicates that the chemical does not pose a health risk.

Learn more about lab labels here https://brainly.com/question/14459928

#SPJ10

The cutoff frequency for a certain element is 1.22 x 1015 Hz. What is its work function in eV?
Hint: 1 eV 1.60 x 10-19 J
=[?] eV

someone please teach me how to solve this its gonna make me cry

Answers

The work function of the metal is obtained as 5.1 eV

What is the cutoff frequency?

The cutoff frequency is the frequency below which photo electric effect can not occur as electrons are not removed from the metal surface.

Now;

fo = 1.22 x 10^15 Hz

Wo = hfo

Wo = 6.6 * 10^-34 * 1.22 x 10^15

Wo = 8.1 * 10^-19 J

If 1 eV = 1.60 x 10-19 J

x eV = 8.1 * 10^-19 J

x = 8.1 * 10^-19/ 1.60 x 10-19

x = 5.1 eV

Learn more about cutoff frequency:https://brainly.com/question/14378802

#SPJ1

a serving of a particular fruit dessert contains 20.0 g of sugar. if all the sugar is sucrose, c12h22o11, how many molecules of sugar are present in this serving?

Answers

Taking into account the definition of Avogadro's number and molar mass, 3.49334×10²² molecules of sucrose are present.

Definition of molar mass

The molar mass of substance is a property defined as its mass per unit quantity of substance, in other words, molar mass is the amount of mass that a substance contains in one mole.

Avogadro's Number

Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

Molecules of sugar in this case

In first place, the molar mass of sucrose is 342 g/mole. So, you can apply the following rule of three: If by definition of molar mass 342 grams of the compound are contained in 1 mole, 20 grams of the compound are contained in how many moles?

[tex]amount of moles=\frac{20 gramsx1 mole}{342 grams}[/tex]

amount of moles= 0.058 moles

Now, considering the Avogadro's number, you can apply the following rule of three: If 1 mole of the compound contains 6.023×10²³ molecules, 0.058 moles contains how many molecules?

amount of moleculas= (6.023×10²³ molecules × 0.058 moles)÷ 1 mole

amount of molecules= 3.49334×10²² molecules

Finally, 3.49334×10²² molecules of sucrose are present.

Learn more about

molar mass:

brainly.com/question/5216907

brainly.com/question/11209783

brainly.com/question/7132033

brainly.com/question/17249726

Avogadro's Number:

brainly.com/question/11907018

brainly.com/question/1445383

brainly.com/question/1528951

#SPJ12

A volumetric pipette has one marked line that indicates a specific volume. Considering polar substances dip downward in a glass volumetric pippette creating a concave meniscus, what is the correct way to read a volumetric pipette to have the most accurate measurement?.

Answers

The best way to make an accurate measurement of the height of a polar liquid is to take the reading from the lowest point of the meniscus.

What is the meniscus of a liquid?

The meniscus of a liquid is a curved that occurs at the top of a liquid placed in a container as a result of the attractive forces between the molecules of a the liquid.

Polar substances such as water have a concave meniscus as they dip downwards.

Therefore, the best way to make an accurate measurement of the height of a polar liquid is to take the reading from the lowest point of the meniscus.

Learn more about meniscus at: https://brainly.com/question/10868896

#SPJ1

What is the change in
temperature when water goes
from 65.0 °C to 25.0 °C?
AT = [?] °C

Answers

Answer:

-40.0 °C

Explanation:

Change in temperature can be written as [tex]\displaystyle{\Delta T = T_2-T_1}[/tex]. The variables are defined below here:

[tex]\displaystyle{\Delta T}[/tex] means change in temperature.

[tex]\displaystyle{T_2}[/tex] means the final temperature value.

[tex]\displaystyle{T_1}[/tex] means the initial temperature value.

From the question, we know the temperature changes from 65.0 °C to 25.0  °C. Therefore, our initial temperature is 65.0 °C and final temperature is 25.0 °C.

Hence:

[tex]\displaystyle{\Delta T=25.0-65.0}\\\\\displaystyle{\Delta T = -40.0}[/tex]

Therefore, the change in temperature is -40.0 °C.

A student needs to standardize a base solution by titration with an acid solution of known concentration. She finds the volume of the acid solution needed to reach the endpoint for a sample of the base solution. Arrange the steps in the order that will allow her to determine the concentration of the base solution.

Answers

The steps usually involves adding the known solution (the titrant) to a known quantity of the unknown solution (the analyte) until the reaction is complete which can be understood in detail as below with the help of through out process of titration.

What is Titration ?

A titration is a technique used to work out the concentration of an unknown solution based on its chemical reaction with a solution of known concentration.

Steps in order to determine the concenteration of base solution ;  

(Acid-Base Titration)

Choose the titrant.Choose the titrate.Select the normality of the titrate.Choose the volume of the liquid to be pipetted out.Select the indicator.Start titration.End point is noted at the colour change of the solution.From the final reading the normality of titrant can be calculated by the equation:

                                          ​N₁V₁=N₂V₂

After finding the normality, the amount of given substance in the whole of the given solution can be calculated by the equation:

          ​Mass = Equivalent weight  x  Normality \  Volume  {1000}

Learn more about titration here ;

https://brainly.com/question/15365870

#SPJ1

Which of the following most accurately describes a regulatory molecule that must be transported to its place of action within the body?

hormone

polypeptide

enzyme

Answers

Answer:

the answer is hormone

Explanation:

because it is

The average temperature of healthy person is 98.6°F. What is it in
Celsius scale?

Answers

Answer:

37 Degrees Celsius

Explanation:

A 5 Complete the sentences using words from the list. You may use them once, more than once, or not at all.
increases;decreases;stays the same
a) When liquid water boils, the distance between the particles ____
b) When liquid water boils, the strength of the attractive forces between the particles ___
c) When steam condenses, the speed of movement of the particles ___​

Answers

Answer

Number 1. increase

number 2 . decrease

number 3. decrease

What is a quantum of light energy called?
O A. A photon
OB. A frequency
O C. A proton
O D. An electron

Answers

Answer:

A) photon

Explanation:

hope it helps and give brainliest if its correct

Answer:

Photon

Explanation:

please mark brainliest please

How many grams of aluminum
chloride, AlCl3, form when 0.25 mol
Al react?

2AI+ 3Cl₂ → 2AICI 3

[?] g AICI 3

Answers

From the equation, we know that for every 2 moles of aluminum consumed, 2 moles of aluminum chloride are produced.

This means that if 0.25 moles of Al react, then 0.25 moles of aluminum chloride are produced.

The atomic mass of Al is 26.9815385 g/mol.The atomic mass of Cl is 35.45 g/mol.

So, the formula mass of aluminum chloride is:

26.9815385+3(35.45)=133.3315385 g/mol.

Thus, 0.25 moles have a mass of:

(133.3315385)(0.25), which is about 33 g (to 2 sf)

Saturated fatty acids and unsaturated fatty acids differ in.

Answers

Answer:

the number off double bonds in a fatty acid chain

Which industrial methods of preparing alcohol are more economical? Explain.​

Answers

The industrial methods of preparing alcohol that is more economical is fermentation.

What is fermentation?

Fermentation is defined as the industrial method by which starch is converted to ethyl alcohol by using some specific enzymes and microorganisms known as yeast

It is an economical method because the raw material which is starch is readily available.

Learn more about fermentation here:

https://brainly.com/question/25088514

#SPJ1

An element has two naturally-occurring isotopes. The mass numbers of these isotopes are 115.00 u and 117.00 u, with natural abundances of 25% and 75%, respectively. Calculate its average atomic mass. Report your answer to 2 decimal places.

Answers

[tex](115.00)(0.25)+(117.00)(0.75)=\boxed{116.50 \text{ u}}[/tex]

Brainliest to first decent answer

What is the chemical formula for the molecule represented by the model?

CHO
C4H9O2
C4H8O
C3H8O2

Answers

The correct formula of the molecule is C4H9O2.

What is a model?

The model of a compound is a representation of the molecule. It gives us an idea of what the molecule looks like as well as its molecular formula.

Looking at the structure of the compound as shown in the model in the question, the correct formula of the molecule is C4H9O2.

Learn more about molecular model:https://brainly.com/question/156574?

#SPJ1

Answer:C4H9O2.

Explanation:

There are 8.421 g of dry ZnSO4 and
6.579 g H₂O in the sample.

Step 2: Determine the moles of water and anhydrous compound.

Zn = 65.38 g/mol, S = 32.07 g/mol,
H = 1.01 g/mol, O = 16.00 g/mol

How many moles of ZnSO4 are present?

[?] mol ZnSO4

Answers

The number of moles of H₂O is  0.36 mol.

The number of moles of LiClO₄ is  0.0521  mol.

What are moles?

Mole is an important standard unit used for the measurement of large quantities of atoms, molecules, or other particles. One mole is equal to 6.022×10²³ units.

The number of moles of a substance is calculated by:

Moles =[tex]\frac{mass}{molar \;mass}[/tex]

To find the number of moles of H₂O:

Mass of H₂O in the sample = 6.579 g

The molecular weight of H₂O = 18.02g

Moles = [tex]\frac{mass}{molar \;mass}[/tex]

Moles = [tex]\frac{6.579 g}{18.02g}[/tex]

Moles = 0.36

To find the number of moles of [tex]ZnSO_4[/tex]:

Mass of [tex]ZnSO_4[/tex] in the sample = 8.421 g

The molecular weight of [tex]ZnSO_4[/tex]= 161.47 g/mol

Moles =[tex]\frac{mass}{molar \;mass}[/tex]

Moles = [tex]\frac{8.421 g}{161.47 g/mol}[/tex]

Moles = 0.0521 moles

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

What type of molecule is pentanal?
o a. aldehyde
o b. ester
o c. ketone
o d. alcohol

Answers

Answer:

aldehyde

Explanation:

it ends with "al" of "al"dehyde, always check the end

lithium
potassium.
calcium
sodium
magnesium
aluminum.
zinc
iron
nickel
lead
hydrogen
copper
mercury
silver
gold
An unknown metal displaces aluminum (Al) from solution but does not displace sodium (Na). Using the activity series, determine the unknown
metal.
OA. Calcium (ca)
OB. zinc (Zn)
OC. manganese (Mn)
OD. magnesium (Mg)
increasing activity
calcium (Ca)

Answers

Answer:

The unknown metal could be calcium or magnesium.

Explanation:

Displacement of a metal from its chemical reaction is shown by the reaction known as single displacement reaction. The reactivity of metal is determined by the reactivity series. The metals lying above in the series are more reactive than the metals which lie below in the reactivity series.

Metal B is more reactive than metal A.

The metal which easily displaced aluminium will lie above in the series but that same element cannot displace sodium, so it will lie below in the series.

Hence, from the series, we conclude that the unknown metal could be calcium or magnesium.

A scientist measures the standard enthalpy change for the following reaction to be -139.5 kj :

h2(g) + c2h4(g)c2h6(g)

based on this value and the standard enthalpies of formation for the other substances, the standard enthalpy of formation of c2h4(g) is _____ kj/mol.

Answers

Answer:

A scientist measures the standard enthalpy change for the following reaction to be -139.5 kj :

h2(g) + c2h4(g)c2h6(g)

based on this value and the standard enthalpies of formation for the other substances, the standard enthalpy of formation of c2h4(g) is _____ kj/mol

Explanation:

Hydrogen ΔHof (kJ/mol) ΔGof (kJ/mol) So (J/mol K)

H2 (g)

0

0

130.7

Carbon ΔHof (kJ/mol) ΔGof (kJ/mol) So (J/mol K)

C2H6 (g)

-84.7

-32.8

229.6

Zac releases the air from a balloon. Which statement best describes what will happen to the air that was inside the
balloon?
O It will become more compacted.
O will remain the shape of the balloon but not the size.
O It will remain the size of the balloon but not the shape.
It will expand to fill the room.

Answers

Answer: It will expand to fill the room.

Explanation:

Gases will expand or compact to fill the available space.

For a particular chemical reaction, the enthalpy of the reactants is -400 kJ. The enthalpy of the products is -390 kJ. The entropy of the reactants is 0.2 kJ/K. The entropy of the products is 0.3 kJ/K. The temperature of the reaction is 25 degrees Celsius. What can you conclude about this reaction

Answers

Answer:

For a particular chemical reaction, the enthalpy of the reactants is -400 kJ. The enthalpy of the products is -390 kJ. The entropy of the reactants is 0.2 kJ/K. The entropy of the products is 0.3 kJ/K. The temperature of the reaction is 25oC. What can you conclude about this reaction?

It is exergonic

It is endergonic

it is a redox reaction

It is being catalyzed by an enzyme

Describe the properties of noble gases. based on their electronic arrangement, explain whether they can exist alone in nature.

Answers

Noble gases exist as monatomic gases, which means that their molecules consist of a single atom.

What are noble gases?

A "Noble gas" can be defined as a gas which does not undergo chemical reactions. Examples of Noble gases are helium, Neon, Argon, Krypton, Xenon, and Radon.

Properties of noble gases:

Noble gases are the least reactive of all elements because they have eight valence electrons, which fill their outer energy level. That's why noble gases rarely react with other elements and form compounds.

Atoms of noble gases do not bond with other gases. Only helium exists as atoms of Helium, not as diatomic molecules. Helium does not form compounds with atoms of other elements.

Learn more about noble gases here:

https://brainly.com/question/25990352

#SPJ1

Dalton law states that the partial pressure of a gas in a mixture of gases is _____ to the total pressure of the mixture.

Answers

Answer:

Dalton law states that the partial pressure of a gas in a mixture of gases is equal to the total pressure of the mixture.

Other Questions
What is the right side of the brain associated with? Any Acellus folk figure out the answer to this one??? I CANNOT for the life of me. What is the angular velocity of the minute hand of a clock?[?] rad/sHint: It travels clockwise and takes 60 minutes to make one revolution.(not 1.25, 1.7, 1800, 30, 60, 0.1047) what is the margin of safety?A. The effect of a drug on the whole bodyB. The expected response that occursC. The difference between the therapeutic dose and the toxic doseD. A predictable but not desired response On a coordinate plane, a graph shows Street on the x-axis and Avenue on the y-axis. A line is drawn from Tia to Lei. Tia is at (4, 8) and Lei is at (12, 20).Tia lives at the corner of 4th Street and 8th Avenue. Lei lives at the corner of 12th Street and 20th Avenue. The fruit market is Three-fourths the distance from Tias home to Lei's home. x = (StartFraction m Over m + n EndFraction) (x 2 minus x 1) + x 1y = (StartFraction m Over m + n EndFraction) (y 2 minus y 1) + y 1Where is the fruit market?6th Street and 11th Avenue10th Street and 17th Avenue9th Street and 15th Avenue8th Street and 14th Avenue Siddhartha and Govinda join the samanas.Who are the samanas?a group of men who have achieved the final release from suffering and desirepeople who follow all the rites and ceremonies of HinduismHindu ascetics who practice self-denial, such as fastinga group stuck in the world of desire and suffering You find a wallet in the park, and no one notices when you pick it up. You look inside, and discover that it belongs to a very wealthy local businessman, and it contains only an identification card, and $1000 in cash. You're a poor, hardworking student, who could very much use the money. Apply the Kantian Categorical Imperative, and in a short essay (around 200 words) describe what you should do. In 250-300 words, explain the Christian perspective of the nature of spirituality and ethics in contrast to the perspective of postmodern relativism within health care. In 250-300 words, explain what scientism is and describe two of the main arguments against it. In 750-1,000 words, answer each of the worldview questions according to your own personal perspective and worldview: What is ultimate reality Company A has 279,000 basic shares outstanding and 26,000 outstanding options and warrants. The exercise price of these options is $3.75. The company also has $200,000 of convertible bonds with an effective conversion price of $4.00. The average market share price for the reporting period is $7.50. What is the diluted shares outstanding using the treasury stock method & if-converted methods?Review Later345,333305,000342,000292,000 Find the value below using your calculator. Round to the nearest hundredth. e Find the value below using your calculator . Round to the nearest hundredth . e Which article should be used to correctly complete the sentence below? I will need breakfast. B. some the D. an A O C OD egg to make the omelette for my Mother's Day Which article should be used to correctly complete the sentence below ? I will need breakfast . B. some the D. an A O C OD egg to make the omelette for my Mother's Day The strategy of distinguishing one firms product from the competing products of other firms is called product. Someone to help me with these questions. An aqueous solution of 4 mol/L nitric acid is electrolysis in an electrolytic cell using graphite electrodes.Name the gas given off at the anode One of the steps of driving-forces analysis is to identify which a. strategy changes a company may need to make to prepare for the impacts of the driving forces. b. strategic group is the most powerful. c. industry member is likely to become (or remain) the industry leader and why. d. key success factors are most likely to help their company gain a competitive advantage. e. of the five competitive forces will be the strongest driver of industry change. which event is most likely to be considered a normative age-graded influence on development? what sacrifice does each character make for each other in the gift of magi Which word best describes the tone of the passage?lightheartedfrustratedsuspensefulfrightened In calm water, the motorboat of Jana is moving at the speed of 16.5km/h. On a river, because of the current, the boat moves faster down the river only by raising it. Jana went up the river in 5 hours and the decent in only 2 hours. What is the speed of the current? I finished all my other questions but i don't know how to do this one. could someone help me? I added 100 points. It is attached. :) which relation describes the graph?