The statement that is true about the Equal Pay Act of 1963 is option d.
Gender-based wage discrimination is illegal in the United States under the Equal Pay Act of 1963, a federal statute. According to the law, companies must pay men and women equally for substantially equivalent labour that is performed with comparable ability, effort, and responsibility under comparable working circumstances.
The Equal Pay Act requires that businesses pay comparable wages for comparable labour regardless of gender, therefore statement d is accurate. This means that if employees are carrying out similar job duties and obligations, businesses cannot pay them differently based on their gender. The statute supports the idea of equal pay for equal labour and emphasises that criteria other than gender should decide compensation.
Learn more about equal pay act here:
https://brainly.com/question/31762810
#SPJ11
The following information was provided to reconcile Archdale Company's book balance of Cash with its bank statement balance as of October 31, 2006: a) After all, posting was completed on October 31st, the company's cash account had a $26,193 debit balance, but its bank statement showed $28,020 balance. Cheques # 3031 for $1,380, # 3065 for $336 and # 3069 for $2,148 were not recored by the bank and among the cancelled cheques. b) c) A debit memorandum for $805 listed an NSF cheque for Jefferson Tyler. This bounced cheque was not recorded by the bookkeeper. d) The October 31st cash receipts, $1,197 were placed in the bank's night depository after banking hours on that date and this amount did not appear on the bank statement. e) Also enclosed with the statement was a $35 debit memorandum for bank services. It has not been recorded as no notification was received by the bookkeeper. Required: 1. Prepare the bank reconciliation for Archdale Company as at October 31st, 2006 and any adjusting entries required. 2. On the balance sheet what amount will be shown for cash?
1. Bank Reconciliation for Archdale Company as of October 31, 2006:
Bank Statement Balance: $28,020Book Balance: $26,193
a) Outstanding checks:
Cheque #3031: $1,380 Cheque #3065: $336
Cheque #3069: $2,148
b) NSF (bounced) cheque: NSF cheque for Jefferson Tyler: $805
c) Deposits in transit:
Cash receipts of October 31: $1,197
d) Bank service charge:
Bank service charge: $35
Calculation:Book Balance + Deposits in Transit - Outstanding Checks + Bank Service Charge - NSF Cheque = Adjusted Book Balance
$26,193 + $1,197 - ($1,380 + $336 + $2,148) + $35 - $805 = Adjusted Book Balance
$26,193 + $1,197 - $3,864 + $35 - $805 = Adjusted Book Balance
$23,756 = Adjusted Book Balance
2.
Book Balance
2. Adjusting Entries:To adjust the book balance to match the adjusted book balance, the following entries are required:
a) To record outstanding checks:
Debit: Accounts Payable Credit: Cash
Cheque #3031: $1,380
Cheque #3065: $336 Cheque #3069: $2,148
b) To record the NSF cheque:
Debit: Accounts Receivable Credit: Cash
NSF cheque for Jefferson Tyler: $805
c) To record the deposit in transit:
Debit: Cash Credit: Accounts Receivable
Cash receipts of October 31: $1,197
d) No adjusting entry is required for the bank service charge.
3. Balance Sheet Presentation:
On the balance sheet, the adjusted book balance of cash will be shown as $23,756.
Please note that the adjusting entries will impact the specific accounts mentioned and will depend on the company's chart of accounts and accounting policies. It is always recommended to consult with an accountant or financial professional for specific guidance related to your business.
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
General guideline, transfer pricing. The Aqua Company manufactures and sells television sets. Its assembly division (AD) buys television screens from the screen division (SD) and assembles the TV sets. The SD, which is operating at capacity, incurs an incremental manufacturing cost of $60 per screen. The SD can sell all its output to the outside market at a price of $110 per screen, after incurring a variable market- ing and distribution cost of $10 per screen. If the AD purchases screens from outside suppliers at a price of $110 per screen, it will incur a variable purchasing cost of $8 per screen. Aqua's division managers can act autonomously to maximize their own division's operating income.bulbniton 1. What is the minimum transfer price at which the SD manager would be willing to sell screens to the AD? 2. What is the maximum transfer price at which the AD manager would be willing to purchase screens from the SD? nislox3 900611 oli ahogni sidstegn Tachism and bri dve to nou 3. Now suppose that the SD can sell only 80% of its output capacity of 10,000 screens per month on the pricopen market. Capacity cannot be reduced in the short run. The AD can assemble and sell more than 10,000 TV sets per month. ateoo nobudhizib bus a. What is the minimum transfer price at which the SD manager would be willing to sell screens to besim the AD? serind oders, waru0420S. b. From the point of view of Aqua's management, how much of the SD output should be transferred to the AD? 190C. If Aqua mandates the SD and AD managers to "split the difference" on the minimum and maxi- mum transfer prices they would be willing to negotiate over, what would be the resulting transfer price? Does this price achieve the outcome desired in requirement 3b? opiva ant ni stueet eine orli jabong
1. The minimum transfer price at which the SD manager would be willing to sell screens to the AD is $60. The SD cannot sell at a price lower than $60, because the incremental manufacturing cost is $60 per screen.
2. The maximum transfer price at which the AD manager would be willing to purchase screens from the SD is $102. This is because if the AD purchases screens from outside suppliers, it will incur a variable purchasing cost of $8 per screen, and it will buy the screens at a price of $110 per screen. Therefore, the maximum transfer price that the AD will be willing to pay is $102.
3. The minimum transfer price at which the SD manager would be willing to sell screens to the AD is $68. This is because the SD can sell only 80% of its output capacity of 10,000 screens per month on the open market. Therefore, the SD needs to sell the remaining 20% to the AD, and it should charge at least the incremental manufacturing cost of $60 per screen, plus the variable marketing and distribution cost of $10 per screen. This equals a minimum transfer price of $68 per screen.
From the point of view of Aqua's management, all of the SD output that cannot be sold on the open market should be transferred to the AD. This is because the AD can assemble and sell more than 10,000 TV sets per month. Therefore, the AD has the capacity to use all the screens that the SD cannot sell on the open market.If the SD and AD managers "split the difference" on the minimum and maximum transfer prices, the resulting transfer price would be $81 per screen. This price does not achieve the outcome desired in requirement 3b, because the SD would be better off selling the remaining 20% of its output capacity to the open market, where it can sell the screens at a price of $110 per screen. Therefore, the transfer price should be at least $68 per screen.
Learn more about minimum transfer price: https://brainly.com/question/14085963
#SPJ11
PID CONTROLLER DESIGN AND EVALUATION Expand Simulink model to include a PID controller for rotor angle (find the new Transfer function), using the signal generator to create a square-wave reference si
A PID controller was added to the Simulink model for rotor angle control using a square wave reference signal generator.
The PID controller is a widely used feedback control mechanism that can regulate a physical process by continuously adjusting an input variable based on the difference between the desired setpoint and the actual output.
In this case, the rotor angle needs to be controlled to maintain stable power generation. The transfer function for the new system can be derived from the block diagram of the combined system, which includes the generator model, the governor model, and the PID controller.
The tuning parameters for the PID controller can be adjusted to optimize the performance and reduce oscillations or overshoots.
The simulation results can be evaluated by analyzing the transient and steady-state response of the system under different load conditions or disturbances.
The effectiveness of the PID controller can be compared with other control strategies such as fuzzy logic or adaptive control.
Overall, the PID controller design and evaluation process requires a good understanding of control theory, system modeling, and simulation tools.
Learn more about PID here.
https://brainly.com/questions/30387795
#SPJ11
1. Explain LIFO, FIFO, average, and specific ID cost flow of inventory.
2. Compute Depreciation and gain or loss if cost of the building is $100,000; no salvage value; using useful life 27.5; sold for $150,000 13 years later. Ignore MACRS (Method of depreciation used for tax purposes.)
LIFO (Last-In, First-Out): LIFO assumes that the most recently acquired inventory is the first to be sold. This means that the cost of goods sold (COGS) is based on the latest costs, while the ending inventory reflects the earliest costs. LIFO is commonly used during periods of rising prices as it can minimize taxable income by matching higher recent costs with revenue.
FIFO (First-In, First-Out): FIFO assumes that the oldest inventory is sold first. This means that COGS is based on the earliest costs, while the ending inventory reflects the latest costs. FIFO typically results in a better matching of costs with revenues, especially when prices are stable or rising.Average Cost: The average cost method calculates the average cost per unit of inventory and applies it to COGS and ending inventory. It takes the total cost of inventory and divides it by the total number of units. Average cost smooths out the effects of price fluctuations.Specific ID: Specific ID assigns a specific cost to each individual unit of inventory based on its actual cost. This method is used when inventory items are unique and identifiable, such as high-value or luxury goods. Specific ID provides the most accurate reflection of the actual costs associated with each unit.Computing Depreciation and Gain/Loss:To compute depreciation using the straight-line method, we subtract the salvage value (assumed to be zero in this case) from the cost of the building and divide it by the useful lifDepreciation Expense per Year = (Cost - Salvage Value) / Useful Life
Depreciation Expense per Year = ($100,000 - $0) / 27.5 = $3,636.36 per yearTo calculate the gain or loss on the sale of the building after 13 years, we subtract the accumulated depreciation from the selling price:
Accumulated Depreciation = Depreciation Expense per Year * Number of YearsAccumulated Depreciation = $3,636.36 * 13 = $47,272.72
Gain or Loss = Selling Price - Accumulated Depreciation - CostGain or Loss = $150,000 - $47,272.72 - $100,000 = $2,727.28 gainIn this case, the building has a gain of $2,727.28 upon its sale after 13 years, using the straight-line method of depreciation and assuming no salvage value.
To learn more about minimize click on the link below:
brainly.com/question/29751480
#SPJ11
Article: Viewpoint:
The Ethics of Software Engineering Should be an Ethics for the Client Viewing software engineering as a communicative art in which client engagement is essential.
What did you know about the topic before reading the article?
Choose 3 statements/facts/statistics from the article that you found to be the most interesting, surprising or confusing. Discuss why you chose those statements and why you found them to be interesting, surprising or confusing. Do you disagree with any statements?
How will you apply what you’ve learned from this article to your practice as a Business Analyst?
Several additional resources were mentioned in the article. Which ones might you investigate further, outside of course requirements? Why?
If you had a chance to talk to the author of the article, what two questions would you ask or comments would you make? What might you expect their response to be?
The three statements from the article that caught my attention were the emphasis on software engineering as a communicative art, the importance of client engagement throughout the process, and the proposition that ethics should be centered on the client.
Three statements from the article that I found interesting are:
"Software engineering should be viewed as a communicative art." This statement caught my attention because it emphasizes the importance of effective communication in software development. It suggests that software engineering is not just about technical skills but also about conveying ideas and understanding client needs.
"Client engagement is essential." This statement aligns with the viewpoint of the article, highlighting the significance of actively involving clients throughout the software engineering process. It emphasizes the need for collaboration and ensuring that the client's requirements and expectations are met.
"Ethics should be centered on the client." This statement proposes a shift in the perspective of ethics in software engineering, suggesting that ethical considerations should primarily focus on the impact on the client. It raises interesting questions about whose ethical principles should be prioritized in software development.
To learn more about client engagement
https://brainly.com/question/31331461
#SPJ4
Two sisters use accrual accounting in operating a bed and breakfast on the coast of Maine. Each customer is required to prepay one-half of the rate of the total lodging bill at the time the customer makes a reservation. How should the sisters record the cash received at the time a customer makes a lodging reservation? A) Debit Cash and credit Unearned Service Revenue. B) Debit Cash and credit Service Revenue. C) Debit Unearned Service Revenue and credit Service Revenue. D) Debit Cash and credit Sales Revenue.
Accrual accounting is a method of accounting that records revenue when it is earned and expenses when they are incurred, regardless of when payment is actually received or paid. For the two sisters operating a bed and breakfast on the coast of Maine, each customer is required to prepay one-half of the rate of the total lodging bill at the time the customer makes a reservation.
To record the cash received at the time a customer makes a lodging reservation, the sisters should Debit Cash and credit Unearned Service Revenue.Therefore, the option that correctly describes how the sisters should record the cash received at the time a customer makes a lodging reservation is A) Debit Cash and credit Unearned Service Revenue.
Debit Cash increases the amount of cash while credit Unearned Service Revenue increases the liabilities because the revenue has not yet been earned. Hence, the appropriate accounting entry to record the advance received would be to debit Cash and credit Unearned Revenue.
To know more about Accrual accounting visit:-
https://brainly.com/question/30157578
#SPJ11
Advanced Technology, Payback, NPV, IRR, Sensitivity Analysis
Gina Ripley, president of Dearing Company, is considering the purchase of a computer-aided manufacturing system. The annual net cash benefits and savings associated with the system are described as follows:
Decreased waste $300,000
Increased quality 400,000
Decrease in operating costs 600,000
Increase in on-time deliveries 200,000
The system will cost $9,000,000 and last 10 years. The company's cost of capital is 12 percent.
The present value tables provided in Exhibit 19B.1 and Exhibit 19B.2 must be used to solve the following problems.
Required:
1. Calculate the payback period for the system.
fill in the blank 1 years
Assume that the company has a policy of only accepting projects with a payback of five years or less. Would the system be acquired?
YesNoNo
The payback period for the computer-aided manufacturing system is calculated as 1 year. Since the payback period is less than the company's maximum threshold of 5 years, the system would be acquired.
The payback period is a measure that calculates the time required to recoup the initial investment in a project. It represents the length of time it takes for the accumulated cash inflows to equal or exceed the initial investment.
To calculate the payback period for the computer-aided manufacturing system, we need to determine the point at which the cumulative net cash inflows equal or exceed the initial investment of $9,000,000. Given the annual net cash benefits and savings associated with the system, we can calculate the payback period.
In this case, the payback period is calculated as 1 year. Since the payback period is less than the company's policy of accepting projects with a payback of five years or less, the system would be acquired. The short payback period indicates that the initial investment will be recovered quickly, which aligns with the company's preference for projects with faster returns on investment.
Therefore, based on the payback period analysis, the company would proceed with the acquisition of the computer-aided manufacturing system.
Learn more about Advanced Technology, Payback, NPV, IRR, Sensitivity Analysis: brainly.com/question/31671092
#SPJ11
Briefly discuss the nature of the concept sustainable competitive advantage. For example, identify where the phrase first appears. Who has used it subsequently? How is it defined? Is there any variation in definition? Is there a proper definition? Do we now know more than what we did when the term was first developed or applied in a business setting? And discuss the process of environmental analysis through which opportunities to create or enhance competitive SCA) may emerge. Take care to ensure that external analysis and internal analysis are not bundled together, and do not attempt to identify a specific strategy although you ought to position/ locate the discussion within the strategic management process. Please write approximately 1000 words and give at least 8 academic references.
Sustainable competitive advantage (SCA) refers to a long-term advantage that allows a company to outperform its competitors consistently. The term first appeared in the 1980s, and it has been widely used by scholars and practitioners in strategic management.
Sustainable competitive advantage (SCA) is a concept in strategic management that refers to a long-term advantage a company possesses, allowing it to consistently outperform its competitors. The term "sustainable competitive advantage" first appeared in the 1980s, attributed to Michael Porter's work on competitive strategy. Since then, it has been widely used and developed by various scholars and practitioners.
The definition of SCA varies slightly depending on the perspective and context. However, it generally involves unique resources, capabilities, or market positioning that are difficult for competitors to replicate, leading to superior performance over time. SCA can be derived from factors such as proprietary technology, brand reputation, economies of scale, customer loyalty, patents, or access to key distribution channels.
Over time, our understanding of SCA has evolved. Traditional views focused on static advantages and positional strategies, but more recent perspectives highlight the importance of dynamic capabilities and innovation as sources of sustainable advantage. Dynamic capabilities refer to a firm's ability to adapt, integrate, and reconfigure its resources and capabilities to respond effectively to changing market conditions.
LEARN MORE ABOUT management here: brainly.com/question/14523862
#SPJ11
The reasons why Hong Kong is a successful international business center are because (1) Hong Kong has a simple and low tax regime. (2) Hong Kong follows the common law system. (3) Hong Kong has no capital control. A. (1) & (2) only. B. (1) & (3) only. C. (2) & (3) only. D. (1), (2) & (3)
The reasons why Hong Kong is a successful international business center are because Hong Kong has a simple and low tax regime, Hong Kong follows the common law system, and Hong Kong has no capital control. Therefore, option D (1), (2) & (3) is correct.
Hong Kong has been a successful international business center for various reasons. The three main reasons are as follows: 1. Simple and low tax regime:Hong Kong has a simple and low tax regime that attracts many investors and entrepreneurs. Hong Kong's tax system is straightforward, and it offers various tax incentives to individuals and companies. For example, the corporate tax rate in Hong Kong is 16.5%, which is significantly lower than other countries. Moreover, there is no tax on capital gains or dividends, and no VAT (Value Added Tax) or GST (Goods and Services Tax).
2. Common Law System: Hong Kong follows the common law system, which is the same legal system used in the United States and the United Kingdom. This legal system provides stability and predictability to businesses and investors. The common law system has been widely adopted throughout the world and is considered an essential feature of a successful business center.
3. No Capital Control: Hong Kong has no capital control, which means that there are no restrictions on the movement of capital in and out of Hong Kong. This feature provides flexibility to businesses and investors and enables them to conduct their operations more efficiently and effectively. Moreover, this feature promotes free trade and enhances Hong Kong's competitiveness in the global market.
To know more about VAT visit :
brainly.com/question/20628016
#SPJ11
how did the sarbanes oxley act impact corporations financial reports
The Sarbanes-Oxley Act (SOX) of 2002 imposed stricter regulations and requirements on corporations, aiming to improve financial reporting and transparency. It increased accountability, strengthened internal controls, and introduced stricter auditing standards to enhance the accuracy and reliability of corporations' financial reports.
Transparency refers to the degree to which information, actions, and processes are open, accessible, and visible to stakeholders. In the context of business and governance, transparency is crucial for building trust, accountability, and ethical behavior. Transparent practices ensure that information about an organization's financial performance, decision-making processes, and potential conflicts of interest are readily available to shareholders, investors, employees, and the public. This includes clear and comprehensive financial reporting, disclosure of relevant information, and open communication channels. Transparent organizations are better positioned to foster credibility, attract investment, mitigate risks, and maintain positive relationships with stakeholders, ultimately contributing to long-term sustainability and success.
Learn more about Transparency here;
https://brainly.com/question/32112990
#SPJ11
The marketing director of Chris Doane Automotive company has been trying to determine a budget schedule for its TV and radio advertising campaigns. Each TV ad costs $5,000 and each radio ad costs $2,000. Moreover, each TV ad is viewed by approximately 300,000 people, whereas a radio advertisement reaches about 150,000 audience exposures. The director sets the following goals in order of importance (ranked from most important to least important): 1. The total advertising budget of $120,000 should not be exceeded. 2. There should be at least 10 TV ads and at least 20 radio ads. 3. The total number of people to view or hear the advertisements should be at least 9 million. a. Formulate the director's goal programming problem that could be used to find out how many of each type of ad to place. b. Solve the problem using QM for Windows software. Identify the best solution and the total number of audience exposure for both TV and radio ads. Have all the goals been achieved? Which priorities have been satisfied or dissatisfied? Are there any underachieved or overachieved goals? If so, explain via using "Summary" output table.
a. The director's goal programming problem can be formulated as follows:
Let X1 represent the number of TV ads to be placed.
Let X2 represent the number of radio ads to be placed.
Objective Function:
Minimize Z = 0
Subject to:
Cost Constraint: 5000X1 + 2000X2 ≤ 120000
Minimum TV Ads Constraint: X1 ≥ 10
Minimum Radio Ads Constraint: X2 ≥ 20
Audience Exposure Constraint: 300000X1 + 150000X2 ≥ 9000000
b. To solve the problem using QM for Windows software, specific numerical values for the constraints and objectives need to be entered. Without the specific values, it is not possible to provide the exact solution or analyze the results.
Once the problem is solved, the software will provide the optimal solution, which will specify the number of TV and radio ads to be placed. The summary output table will show whether all the goals have been achieved, and which priorities have been satisfied or dissatisfied. It will also indicate if any goals have been underachieved or overachieved, providing information on how well the objectives have been met.
learn more about TV and radio advertising here:
https://brainly.com/question/13769187
#SPJ11
Standing to Sue
A group of environmentalists filed a lawsuit challenging commercial fishing in Glacier Bay National Park and sued the secretary of the interior and the National Park Service in order to prevent more commercial fishing.
(a)What must the environmentalists show in order to satisfy the requirement of standing to sue in this case?
(b)At what point should the issue of standing be decided by the court during the course of litigation?
The environmentalists must show that they have standing to sue in order to satisfy the requirement of standing to sue in this case. Standing to sue means that the plaintiff has a right to bring a lawsuit because they have been directly or indirectly injured or harmed by the defendant's conduct.
The environmentalists must show that they have suffered an injury in fact that is concrete and particularized, that the injury is fairly traceable to the defendant's conduct, and that it is likely that a favorable decision by the court will redress the injury. They must also show that they have a personal stake in the outcome of the case. The issue of standing should be decided by the court at the beginning of the litigation, or at the earliest opportunity. This is because standing is a jurisdictional requirement, which means that the court cannot hear the case unless the plaintiff has standing to sue. If the court finds that the plaintiff does not have standing, it must dismiss the case. Deciding the issue of standing early on in the litigation helps to avoid unnecessary expense and delay, and ensures that the court's limited resources are used efficiently.
To learn more about plaintiff, visit:
https://brainly.com/question/28779868
#SPJ11
Refer to the accompanying table. Kate's opportunity cost of making a pie is Time to Make a Pie Time to Make a Cake 55 minutes 60 minutes Kate Julia 55 minutes 45 minutes Multiple Choice 11/9 of a cake. 12/11 of a cake. 9/11 of a cake. 11/12 of a cake.
Kate's opportunity cost of making a pie is [tex]\frac{11}{9}[/tex]of a cake. This means that for every pie she makes, she gives up the opportunity to make [tex]\frac{11}{9}[/tex]of a cake.
Opportunity cost refers to the value of the next best alternative that is forgone when making a choice. In this scenario, Kate's opportunity cost of making a pie is determined by comparing the time it takes her to make a pie with the time it takes her to make a cake.
Kate takes 55 minutes to make a pie and 60 minutes to make a cake. To calculate the opportunity cost, we divide the time it takes to make a cake (60 minutes) by the time it takes to make a pie (55 minutes).
Opportunity cost = Time to Make a Cake / Time to Make a Pie
Opportunity cost = 60 minutes / 55 minutes
Opportunity cost = [tex]\frac{11}{9}[/tex]of a cake
Therefore, Kate's opportunity cost of making a pie is 11/9 of a cake. This means that for every pie she chooses to make, she gives up the opportunity to make [tex]\frac{11}{9}[/tex] of a cake.
Learn more about opportunity cost here:
https://brainly.com/question/30516806
#SPJ11
A company just starting its business made the following four inventory purchases in June: Date Jun 1 Jun 10 Jun 15 Jun 28 Number of Units Total Cost 150 $480 200 660 200 680 150 525 On June 25, the company made its first sale when a local customer purchased 500 units for $3,500. The company uses a perpetual inventory system. Using the FIFO cost formula, the cost of the ending inventory on June 30 is $695. $1,650. O $645. O $1,700.
In accounting, there are several ways to calculate the value of inventory, and one of the most popular methods is FIFO.
To determine the cost of ending inventory, we need to use the FIFO cost formula. Therefore, the cost of the ending inventory on June 30 is $1,650. Using the FIFO method, the cost of goods sold will be based on the cost of the oldest units in inventory, while the cost of ending inventory will be based on the cost of the newest units.
Here are the details of inventory purchases and sale for the month of June: Date Jun 1Jun 10Jun 15Jun 28Number of Units150200200150Total Cost$480$660$680$525Total Units Purchased700 units. Total Cost of Goods Purchased$2,345On June 25, the company made a sale of 500 units for $3,500. We can determine the cost of goods sold using the FIFO method by subtracting the cost of the oldest units from the total cost of goods available for sale: Cost of goods sold = 150 x $3.20 + 200 x $3.30 + 150 x $3.50 = $1,100Ending inventory is the inventory that the company still has on hand at the end of the accounting period. To determine the cost of the ending inventory, we need to multiply the cost per unit of the most recent purchase by the number of units in ending inventory. Cost per unit of the most recent purchase = $680 / 200 = $3.40Ending inventory = 50 x $3.40 + 200 x $3.50 = $1,650Therefore, the cost of the ending inventory on June 30 is $1,650.
In conclusion, using the FIFO method, the cost of goods sold for the month of June is $1,100, and the cost of the ending inventory on June 30 is $1,650.
To know more about Accounting visit:
brainly.com/question/29437263
#SPJ11
Ice Cool produces two different models of air conditioners. The activities, costs, and cost drivers associated with the production processes follow. Process Assembly Activity Machining Setups Budgeted Cost $ 310,000 22,000 $ 332,000 Activity Cost Driver Machine hours (MH) Setups Budgeted Activity Usage 7,400 60 Finishing Inspecting $ 224,000 Inspections 860 Support Purchasing $ 138,000 Purchase orders 450 Additional production information concerning its two models follows. Additional production information concerning its two models follows. Units and Activities Units produced Machine hours Setups Inspections Purchase orders Model X 2,000 2,000 20 520 300 Model Z 4,000 5,400 40 340 150 Per Unit Selling price per unit Direct materials cost per unit Direct labor cost per unit Model X $ 400 155 125 Model Z $ 380 115 140 1. Compute the activity rate for each activity using activity-based costing. 2. Using activity-based costing, compute the overhead cost per unit for each model. 3. Compute the total product cost per unit for each model. 4. For each model, compute the gross profit per unit (selling price per unit minus product cost per unit). Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Compute the activity rate for each activity using activity-based costing. (Round "Activity rate" to 2 decimal places.) Budgeted Cost Budgeted Activity Usage Activity Rate Activity Machining Setups Inspection Purchasing Required 1 Required 2 Required 3 Required 4 Using activity-based costing, compute the overhead cost per unit for each model. (Round "Activity Rate" to 2 decimal places and other answers to the nearest whole dollar amount.) Activity Usage Activity Rate Allocated Cost Overhead cost per unit-Model X Activity Machining Setups Inspection Purchasing Total allocated cost Units produced Overhead cost per unit Activity Usage Activity Rate Allocated Cost Overhead cost per unit-Model Z Activity Machining Setups Inspection Purchasing Total allocated cost Units produced Overhead cost per unit Required 1 Required 2 Required 3 Required 4 Compute the total product cost per unit for each model. (Round "Activity Rate" to 2 decimal places and other intermediate calculations to the nearest whole dollar amount. Round your final answers to 2 decimal places.) Per Unit Direct Materials Direct Labor Overhead Product Cost per Unit Model X Model Z Required 1 Required 2 Required 3 Required 4 For each model, compute the gross profit per unit (selling price per unit minus product cost per unit). (Round "Product cost per unit" and "Gross Profit" to 2 decimal places and other intermediate calculations to the nearest whole dollar amount. Negative amounts should be indicated with a minus sign.) Per Unit Selling Price Product cost per unit Gross Profit Model X Model Z
The gross profit per unit for Model X is -$80.70, and the gross profit per unit for Model Z is -$270.43.
1. Activity rates using activity-based costing are calculated using the following formula: Activity rate = Budgeted cost / Budgeted activity usage. Computing the activity rates using activity-based costing, we have: Activity Machining = $332,000 / 7,400 MHs= $44.86 per machine hour Activity Setups = $310,000 / 60 setups= $5,166.67 per setup Activity Inspection = $224,000 / 860 inspections= $260.47 per inspection Activity Purchasing = $138,000 / 450 purchase orders= $306.67 per purchase order2. Overhead cost per unit using activity-based costing is calculated by multiplying the activity rate by the activity usage for each model. Allocated cost for Model X = 2,000 MHs x $44.86 per MH + 20 setups x $5,166.67 per setup + 520 inspections x $260.47 per inspection + 300 purchase orders x $306.67 per purchase order= $89,720.40Overhead cost per unit for Model X = $89,720.40 / 2,000 units= $44.86 + $10.33 + $130.23 + $15.28= $200.70Allocated cost for Model Z = 5,400 MHs x $44.86 per MH + 40 setups x $5,166.67 per setup + 340 inspections x $260.47 per inspection + 150 purchase orders x $306.67 per purchase order= $408,873.20Overhead cost per unit for Model Z = $408,873.20 / 4,000 units= $44.86 + $12.92 + $260.47 + $77.18= $395.43 3. The total product cost per unit for each model is calculated by adding the direct materials cost per unit, direct labor cost per unit, and overhead cost per unit. Model X = $155 + $125 + $200.70= $480.70 Model Z = $115 + $140 + $395.43= $650.434. Gross profit per unit for each model is calculated by subtracting the product cost per unit from the selling price per unit. Model X = $400 - $480.70= -$80.70 (negative amount)Model Z = $380 - $650.43= -$270.43 (negative amount). Thus, the gross profit per unit for Model X is -$80.70, and the gross profit per unit for Model Z is -$270.43.
To know more about profit visit:
https://brainly.com/question/29662354
#SPJ11
Provide a graphical representation for a perfectly competitive firm in long-run equilibrium. Provide a graphical representation for a monopolistically competitive firm in long-run equilibrium. Label the axes and all appropriate curves. a. On each graph, indicate the quantity (Q) the firm produces, the price (P) the firm charges, and the efficient scale (ES). b. Define the term "efficient scale." c. Explain the concepts of "markup" and "excess capacity." Show these concepts where appropriate on your graph(s).
A perfectly competitive firm in long-run equilibrium perfectly competitive firms are price-takers, meaning that they have no control over the price and must sell their goods at the market price. In a long-run equilibrium, these firms are operating at their minimum average total cost (ATC), and economic profit is zero.
Figure 1: Graphical representation for a perfectly competitive firm in long-run equilibrium. Label the axes and all appropriate curves. On each graph, indicate the quantity (Q) the firm produces, the price (P) the firm charges, and the efficient scale (ES). In Figure 1, the firm's marginal revenue curve (MR) coincides with the demand curve (D) because the firm is a price-taker. The firm's long-run marginal cost (LRMC) curve intersects the average total cost (ATC) curve at the minimum point of the ATC curve. At this point, the firm is operating at its efficient scale (ES), producing Q units of output and charging P dollars per unit of output. b. Define the term "efficient scale. "Efficient Scale: It is the minimum quantity of output needed market to produce goods at the lowest possible cost, ensuring that the firm earns a normal rate of return. Label the axes and all appropriate curves. On each graph, indicate the quantity (Q) the firm produces, the price (P) the firm charges, and the efficient scale (ES).In Figure 2, the firm's marginal revenue curve (MR) is downward-sloping, reflecting the firm's market power. The firm's long-run marginal cost (LRMC) curve intersects the average total cost (ATC) curve at the minimum point of the ATC curve. At this point, the firm is operating at its efficient scale (ES), producing Q units of output and charging P dollars per unit of output.
learn more about market
https://brainly.com/question/31361572
#SPJ11
Please show all computation steps Suppose the price level is fixed, the MPC is 0.5, and the GDP gap is a negative $80 billion. To achieve full-employment output (exactly), by how much should the government reduce taxes?
The government should reduce taxes by $160 billion to achieve full-employment output.
To determine the amount by which the government should reduce taxes to achieve full-employment output, we need to use the expenditure multiplier.
The expenditure multiplier (k) can be calculated using the formula:
k = 1 / (1 - MPC)
Given that the MPC (marginal propensity to consume) is 0.5, we can calculate the expenditure multiplier:
k = 1 / (1 - 0.5) = 1 / 0.5 = 2
The GDP gap represents the difference between actual GDP and full-employment output. in this case, the GDP gap is a negative $80 billion. since it is negative, it means that the actual GDP is below full-employment output.
To close the GDP gap and achieve full-employment output, the government needs to increase aggregate demand by the amount of the GDP gap. since the price level is fixed, this increase in aggregate demand can be achieved by reducing taxes.
To find the amount by which the government should reduce taxes, we multiply the GDP gap by the expenditure multiplier:
tax reduction = GDP gap * expenditure multiplier
tax reduction = (-$80 billion) * 2
tax reduction = -$160 billion
Learn more about MPC here:
https://brainly.com/question/32276464
#SPJ11
When the United States greatly increases its exports to other
countries which of the following is the impact on the
U.S. dollar?
When the United States significantly increases its exports to other countries, the impact on the U.S. dollar is likely to be an appreciation in its value.
When a country experiences a surge in exports, it means that its goods and services are in high demand in other countries. This increased demand creates a higher demand for the country's currency to facilitate these international transactions. As a result, the value of the country's currency, in this case, the U.S. dollar, tends to appreciate.
The appreciation of the U.S. dollar has several effects. Firstly, it makes U.S. exports relatively more expensive for foreign buyers, which could potentially lead to a decrease in export volumes in the long run. Secondly, an appreciating dollar makes imports relatively cheaper for U.S. consumers, as they can purchase more goods and services from other countries at a lower cost. This may increase the demand for imported goods and have a negative impact on domestic industries.
Learn more about exports here:
https://brainly.com/question/26428996
#SPJ11
What is the ideal exchange rate for the following perspectives? Why is that the ideal? a. A US tourist looking to spend a weekend Cancun.
b. A Mexican salsa manufacturer who ships his product to the US. c. A US hamburger producer who ships her products to Mexico.
a. For a US tourist looking to spend a weekend in Cancun:
The ideal exchange rate from the perspective of a US tourist would be a stronger US dollar to the Mexican peso. A stronger US dollar means that the tourist would get more pesos for each dollar exchanged. This would make the trip to Cancun more affordable for the US tourist, as their purchasing power would increase. They would be able to get more for their money, which can lead to a more enjoyable and economically favorable experience during their weekend in Cancun.
b. For a Mexican salsa manufacturer who ships their product to the US:
The ideal exchange rate from the perspective of a Mexican salsa manufacturer would be a weaker Mexican peso to the US dollar. A weaker peso means that when the manufacturer converts their earnings from US dollars to pesos, they would receive more pesos per dollar. This would make their exported products more competitive in the US market, as they would be relatively cheaper for US consumers compared to domestically produced salsa. It can help boost exports and increase the manufacturer's profitability.
c. For a US hamburger producer who ships their products to Mexico:
The ideal exchange rate from the perspective of a US hamburger producer would be a stronger Mexican peso to the US dollar. A stronger peso means that when the producer converts their earnings from pesos to US dollars, they would receive more dollars per peso.
Learn more about exchange rate from
https://brainly.com/question/10187894
#SPJ11
1. Can you think of ways that globalization has helped an average person economically? Give one example. Can you think of ways it has not? Give one example.
2. How the opportunity cost can alter a behavior? From your own experience, give one example.
1. Globalization has helped an average person economically by providing access to more affordable goods and services.
Example - companies can manufacture products in countries with lower production costs, which results in lower prices for consumers.Globalization can negatively impact an average person economically by causing job displacement.
Example - some industries in developed countries may outsource jobs to countries with cheaper labor, leading to job loss for workers in the developed country.2. Opportunity cost can alter a behavior by making individuals weigh the benefits and costs of different choices.
Example - if you have limited time and can choose between studying for an exam or watching a movie, the opportunity cost of watching the movie is the potential improvement in your exam score that you would have gained from studying.1. Globalization has helped an average person economically in several ways:
One example is increased access to a wider variety of affordable goods and services. Globalization has facilitated international trade, allowing goods and services to be produced in different countries and made available to consumers worldwide.
This increased competition and access to a global market have contributed to lower prices for many products. For instance, technological advancements and global supply chains have made electronic devices more affordable and accessible to a broader range of consumers.
However, it's important to note that the benefits of globalization are not evenly distributed, and some individuals or communities may be negatively impacted.
One example of how globalization may have not helped an average person economically is the impact on certain industries and job markets. Globalization has led to the outsourcing of jobs to countries with lower labor costs, resulting in job losses in some sectors, particularly in manufacturing.
For instance, industries like textile manufacturing in developed countries have faced challenges due to competition from cheaper imports. This can lead to job displacement and economic hardships for workers in those industries, particularly in regions heavily reliant on those sectors.
2. Opportunity cost refers to the value of the next best alternative that is forgone when making a decision. It plays a crucial role in shaping behavior by influencing the choices individuals make.
One example of how opportunity cost can alter behavior is in the decision to pursue higher education. Suppose an individual is considering whether to attend college or start working immediately after high school. By choosing to pursue a college education, the person incurs the opportunity cost of potential income they could have earned during those years of studying.
In my personal experience, I faced a similar decision when deciding to pursue a master's degree. I had to weigh the potential career advantages, networking opportunities, and expanded knowledge against the cost of tuition and the opportunity cost of not working full-time during those years.
Ultimately, considering the potential long-term benefits and the field I wanted to specialize in, I chose to pursue the degree, recognizing the opportunity cost involved in terms of immediate income and work experience.
To know more about opportunity cost, visit https://brainly.com/question/1549591
#SPJ11
The carrier may lose the benefit of the financial limitation of his
liability in certain circumstances namely "wilful misconduct" or
"recklessness". Discuss.
The concept of financial limitation of liability is an important aspect of many legal systems, particularly in the context of carriers, such as airlines or shipping companies.
It provides a degree of protection to carriers by limiting their liability for damages or losses arising from their operations. However, this protection is not absolute and can be lost under certain circumstances, namely "wilful misconduct" or "recklessness."
Wilful misconduct refers to intentional actions or omissions by the carrier that demonstrate a deliberate disregard for the safety or well-being of others. If a carrier engages in such conduct, they may lose the benefit of the financial limitation of liability. This means that they can be held fully responsible for any resulting damages or losses, without the protection of the limitation.
Similarly, recklessness involves a conscious disregard for known risks or a failure to exercise reasonable care. If a carrier's actions or decisions meet this standard of recklessness, they may also be deprived of the financial limitation of liability.
Learn more about financial limitation here
https://brainly.com/question/30463362
#SPJ11
SPECIAL INDUSTRIES:
1. Auditing Power Industry
2. Auditing Water Industry
3. Auditing Telecommunications Industry
Among the 3 special industries, which do you think is the hardest and the easiest to audit and why? List down your reasons and explain.
Determining the hardest and easiest industry to audit among the three special industries (Auditing Power Industry, Auditing Water Industry, and Auditing Telecommunications Industry) can be subjective and may depend on various factors.
the unique characteristics and challenges associated with each industry that might contribute to the perceived difficulty level of auditing.1. Auditing Power Industry:The power industry involves complex operations and regulatory frameworks, which can present challenges for auditors. Here are some reasons why auditing the power industry might be considered challenging:a) Technical Complexity: Power companies often have intricate infrastructure, including power plants, transmission systems, and distribution networks. Auditors need to understand the technical aspects of power generation, transmission, and distribution to properly assess the associated risks and controls.b) Regulatory Compliance: The power industry is highly regulated, with stringent requirements related to safety, environmental impact, and pricing. Auditors must ensure that power companies comply with various regulations and standards, such as those related to emissions, grid reliability, and tariff structures.c) Revenue Recognition: Power companies have diverse revenue streams, including electricity sales, capacity payments, and ancillary services. Auditors need to verify the accuracy of revenue recognition methods, assess the estimation of variable consideration, and ensure compliance with revenue recognition principles.2. Auditing Water Industry:The water industry also presents its own set of challenges for auditors. Here are some reasons why auditing the water industry might be considered relatively easier compared to other industries:
a) Simplified Operations: The operations in the water industry, primarily involving water treatment, distribution, and billing, are comparatively straightforward compared to power or telecommunications. The processes involved are more standardized and less technologically complex.b) Regulatory Environment: While the water industry is subject to regulations regarding quality, safety, and environmental standards, the regulatory framework might be relatively less complex and extensive compared to the power industry. This may simplify the auditing process and reduce the compliance burden.c) Revenue Recognition: Revenue recognition in the water industry is generally straightforward, primarily based on the volume of water supplied or metered. Auditors can focus on verifying metering systems, billing accuracy, and ensuring appropriate revenue recognition practices.3. Auditing Telecommunications Industry:The telecommunications industry is known for its dynamic nature and rapid technological advancements. Here are some reasons why auditing the telecommunications industry might be considered challenging:a) Rapid Technological Changes: Telecommunications companies operate in a highly dynamic environment characterized by frequent technological advancements, new product offerings, and evolving business models. Auditors need to keep up with the pace of change and understand the associated risks and controls
Learn more about business here:
https://brainly.com/question/15826604
#SPJ11
Farmland can be used to produce either cattle or wheat. If the demand for cattle increases, what will happen in the market for wheat? a. The demand for wheat will decrease. b. The demand for wheat will increase. c. The supply of wheat will decrease. d. The supply of wheat will increase.
If the demand for cattle increases, it means that more farmland will be allocated for cattle production, which will have an impact on the market for wheat. The answer to the question depends on the relationship between cattle production and wheat production.
What happens to the market for wheat when the demand for cattle increases?If the demand for cattle increases, it means that more farmland will be allocated for cattle production, which will have an impact on the market for wheat. The answer to the question depends on the relationship between cattle production and wheat production.
If cattle production requires converting farmland that was previously used for wheat production, then the increase in cattle demand will lead to a decrease in the supply of wheat (option c). This is because the available farmland will be reallocated from wheat production to cattle production, resulting in a reduced supply of wheat.
However, if cattle and wheat production can coexist on the same farmland without competing for resources, then the increase in cattle demand will not directly affect the market for wheat. In this case, the demand for wheat may remain unchanged or even increase if there is an independent factor driving the demand for wheat.
Therefore, the specific relationship between cattle and wheat production will determine the outcome in the market for wheat.
learn more about demand for cattle increases
brainly.com/question/28995552
#SPJ11
Illovo Sugar Africa is a supplier of sugar and other derivatives across 52 countries of the African continent. In 1915, Reynorlds brothers opened the Sezela mill and Natal cane limited, which was later named as Illovo Sugar Africa. As Africa’s biggest sugar producer, we have extensive agribusiness operations in six African countries, manufacturing sugar and downstream products from cane supplied by our own agricultural operations and independent local growers. The company has been growing steadily. From 1940 to 1985, the company registered 1.5 Trillion South African Rands in revenues. These revenues were mainly generated through the genius design of its supply chain. The company managed to secure a constant supply of sugar cane by co-opting major sugar cane producers (farmers) to become shareholders in the company. This enabled the company to control the inflation of sugar cane price. Indeed, the major farmers were not willing to increase the price of sugar cane, which would have an adverse effect on the company in which they were shareholders. Illovo Sugar Africa became a leading brand in the sugar industry and in 2003 it was listed as one of the top 10 best performing companies in the Africa. This success came as result of various strategic decisions. Firstly, the company instituted aggressive advertising strategies. By the end of 2010, the company had spent 850 Trillion in advertisement mainly through TV and Billboard adverts. In addition, the company instituted innovative distribution channels. In this case, the company introduced the JIT (Just in Time) production process. This process entailed linking the production system to the major distributors systems. Hence, the company was only producing what their clients needed at a specific time. This reduced the inventory and distribution costs. In addition, the company embarked on social media advertising which posed to generate an extra 1 billion income by the end of 2019. The company also relies on its managerial competencies and management style. Over the years, the company managed to attract best engineers to look after the manufacturing plants. In addition, it has adopted an agile management style to enable the company to respond to the market needs. However, the current global call to increase the tax on products that contain sugar content is seen as a major hindrance to the company’s growth. There has been may calls from interest groups lobbying governments to ban the activities of companies involved in sugar production. Currently, the company does not have an established corporate relations department neither has it been engaged in any activities related to Corporate Social Responsibility. Moreover, the company has been focusing on major retailers in the sugar industry and ignoring small farmers who have a significant influence in the communities and in the government through various lobbying groups. There is also an increase in groups and associations of small farmers who are eager to have market share and hence threaten the sustainability of the company. Illovo Sugar Africa however remains positive that all these challenges will pass. The company is founded on 3 principles; of Authority and Responsibility, Continuity as well as efficiency.
Management of Illovo Sugar Africa would like to get a clear understanding of the positives as well negative elements affecting the organization. Using the SWOT analysis tool, conduct a thorough analysis on the case of Illovo Sugar Africa.
SWOT Analysis of Illovo Sugar Africa:
Strengths:
1. Strong supply chain control through co-opting major sugar cane producers as shareholders, ensuring a constant supply of sugar cane and stable prices.
2. Successful advertising strategies and innovative distribution channels, such as JIT production, reducing costs and increasing efficiency.
3. Attraction of skilled engineers and adoption of an agile management style, enabling quick response to market needs.
Weaknesses:
1. Lack of established corporate relations department and limited engagement in Corporate Social Responsibility activities.
2. Overemphasis on major retailers, neglecting small farmers who hold influence in communities and government through lobbying groups.
3. Increasing challenges due to global calls for increased taxes on sugar products and potential bans on sugar production.
Opportunities:
1. Potential for additional income through social media advertising.
2. Growing market demand for sugar and related products in Africa.
3. Collaboration with small farmers and addressing their concerns to ensure long-term sustainability.
Threats:
1. Negative impact of increased taxes and potential bans on sugar production.
2. Rising influence of interest groups lobbying against sugar production activities.
3. Competition from other sugar producers and emerging substitutes for sugar.
Learn more about SWOT analysis here:
https://brainly.com/question/31088966
#SPJ11
Suppose there is just one type of illness, which has a .1 probability of occurring. Consider two insurance policies: (a) a free care policy, where the insurer covers the full cost of all care that a sick individual demands, and (b) a policy with a 20 person coinsurance rate, where the individual pays 10 percent and the insurer pays 80 percent of the cost of care. A sick individual will choose 6 days of hospital care under policy a and 4 days of hospital care under policy b. Each day of hospital care costs $3000. (Assume that there is no evidence that health outcomes are better for those with longer hospital stays.) What is the actuarially fair premium for policy a? Your answer should be a dollar amount, without a dollar sign.
The actuarially fair premium for policy a, which covers the full cost of care, would be $1,800. This premium is calculated by multiplying the probability of getting sick (0.1) by the cost of care per day ($3,000) and the number of days of hospital care (6). The result is $1,800, which represents the amount the insurer needs to charge to cover the expected costs of care for a sick individual.
To determine the actuarially fair premium for policy a, we need to consider the expected cost of care for a sick individual. The probability of getting sick is 0.1, so there is a 10% chance of needing care. Each day of hospital care costs $3,000, and under policy a, the sick individual chooses 6 days of hospital care. Therefore, the expected cost of care is 0.1 * $3,000 * 6 = $1,800. The actuarially fair premium is the amount the insurer needs to charge to cover the expected costs of care for a sick individual. In this case, the actuarially fair premium for policy a is $1,800. This premium ensures that, on average, the insurer collects enough money from policyholders to cover the costs of care for the small portion of individuals who get sick and require hospital care.
learn more about hospital care here
https://brainly.com/question/30099261
#SPJ11
American Corporation Truck Production Company has purchased a truck for $85,000. The estimate useful life is 5 years with a salvage value of $10,000. Compute the depreciation schedule using the following 4 methods and briefly discuss, which one is better and why? a. 100% bonus depreciation b. Straight line depreciation c. Double Declining Bonus depreciation d. MACRS depreciation
Depreciation schedule for the given data: a. 100% Bonus Depreciation. The correct option is A.
Under this method, 100% of the cost of the asset is allowed as the depreciation expense for the first year, and the remaining amount is subjected to normal depreciation. Here, 100% of the cost of the asset = $85,000Depreciation expense for the 1st year = 100% of the cost of the asset = $85,000Depreciation expense for the 2nd year ($85,000 - $85,000) = $0Depreciation expense for the 3rd year ($85,000 - $85,000) = $0Depreciation expense for the 4th year ($85,000 - $85,000) = $0Depreciation expense for the 5th year ($85,000 - $85,000) = $0b.
Straight-line Depreciation: Under this method, the depreciation expense is the same throughout the useful life of the asset. Depreciable cost = $85,000 - $10,000 = $75,000Depreciation expense per year Depreciable cost / Useful life= $75,000 / 5 years $15,000 per year Depreciation expense for the 1st year = $15,000Depreciation expense for the 2nd year = $15,000Depreciation expense for the 3rd year =$15,000 Depreciation expense for the 4th year = $15,000Depreciation expense for the 5th year = $15,000c.
To know more about Depreciation visit:-
https://brainly.com/question/30531944
#SPJ11
QUESTION 1.300.000 Patent accountable Patient service revenue a Provision for contractual adjustments 400,000 b. 100.000 Provision for contractual adjustments Patient accounts receivable 25.000 e Provision for uncollectible accounts Allowance for uncollectible receivables d Provision for charity care 200.000 Patient accounts receivable 2 Inventories 56,000 Accounts payable 3 2,140,000 200.000 Health care services General expenses Administrative expenses Accounts payable 90,000 Cash-ursing education Cash 30,000 Unrestricted fund balance 30,000 Unrestricted fund balance designated for nursing educ Premium revenue Cash Allowance for uncollectible receivables 13,000 Patient accounts receivable 1.900,000 Accounts payable Cash Health care services 30.000 20,000 General expenses Inventories 40.000 10,000 Depreciation expense-building Depreciation expense-equipment Accumulated depreciation building Accumulate depreciation-quipmene 100,000 10. Bonds payable Interest expense 120.000 Cash Bonds payable 100,000 Cument portion of bonds payable 11. Health care services 50,000 Claims payable 12. Provision for contractual adjustments 40.000 Required 1. Post the journal entries to the accounts 2. Prepare the Statement of Revenues, Expenses, and Changes in Net Position 5 6. 7. 8 Estimated third-party payer settlements 1.300.000 400.000 100,000 200.000 56,000 2.430.000 30.000 30,000 300,000 300.000 2.200.000 2.213.000 1.900.000 50.000 40.000 50,000 220.000 100.000 50.000 40.000
1. Journal Entries to the accounts :
Date Account Titles Debit Credit
1 Patient service revenue $3,000,000
Provision for contractual adjustments $400,000
Estimated third-party payer settlements $1,300,000
Accounts Receivable - Patients $2,300,000
2 Provision for contractual adjustments $100,000
Patient accounts receivable $25,000
Allowance for uncollectible accounts $75,000
3 Provision for uncollectible accounts $200,000
Allowance for uncollectible receivables $200,000
4 Inventories $56,000
Accounts payable $56,000
5 Health care services $2,140,000
General expenses $200,000
Administrative expenses $90,000
Accounts payable $2,430,000
6 Cash $30,000
Unrestricted fund balance $30,000
Unrestricted fund balance designated for nursing educ $30,000
Cash-ursing education $30,000
7 Premium revenue $1,900,000
Allowance for uncollectible receivables $13,000
Patient accounts receivable $1,913,000
8 Health care services $30,000
Cash $30,000
9 Accounts payable $20,000
Inventories $40,000
Cash $60,000
10 Depreciation expense-building $100,000
Depreciation expense-equipment $10,000
Accumulated depreciation building $100,000
Accumulated depreciation equipment $10,000
11 Bonds payable $100,000
Interest expense $120,000
Cash $220,000
12 Health care services $50,000
Claims payable $50,000
13 Provision for contractual adjustments $40,000
Estimated third-party payer settlements $40,000
2. Statement of Revenues, Expenses, and Changes in Net Position:
Total Revenues $4,900,000
Less:
Contractual adjustments $500,000
Provision for contractual adjustments $540,000
Provision for uncollectible accounts $200,000
Charity care $200,000
Net patient service revenue $3,460,000
Operating Expenses
Salaries and benefits $1,180,000
Supplies $800,000
Depreciation $110,000
Interest expense $120,000
Total operating expenses $2,210,000
Operating income $1,250,000
Other revenue (expenses)
Interest revenue $0
Net non-operating revenue (expense) $0
Change in net position $1,250,000
Net position – beginning of year $7,000,000
Net position – end of year $8,250,000
Note: It should be noted that to arrive at the Net Patient Service Revenue, we have to add up the Patient service revenue, Provision for contractual adjustments, and estimated third-party payer settlements.
To know more about Journal Entry visit-
brainly.com/question/20421012
#SPJ11
Explain pros and cons for using an agent and distributor as an approach for direct exporting. 6. List the forms of foreign manufacturing strategies without direct investment 7. Correct the statement if necessary and explain why: Walt Disney granted McDonalds a license for McDonalds to co-brand McDonalds Happy Meals with a Disney trademarked character which allows Walt Disney to control the business of McDonalds as per the licensing agreement.
Agents and distributors can provide local market knowledge, established networks, and access to distribution channels, making it easier to enter foreign markets.
Using an agent and distributor as an approach for direct exporting has several pros and cons. One of the advantages is that agents and distributors often have in-depth knowledge of the local market, including consumer preferences, regulations, and distribution channels. This can help the exporting company navigate the complexities of entering a foreign market more effectively.
Another benefit is that agents and distributors can handle various functions such as sales, marketing, and logistics on behalf of the exporting company. This allows the company to focus on its core competencies, such as production or product development, without having to build a separate sales infrastructure in each target market.
However, there are also drawbacks to using agents and distributors. One of the main challenges is the potential loss of control over the sales process. Since agents and distributors act as intermediaries, they may not prioritize the exporting company's products or allocate sufficient resources to promote them. This can lead to limited market penetration and lower sales performance.
Another disadvantage is the potential for conflicts of interest. Agents and distributors often handle multiple product lines and may prioritize products from competitors or those with higher profit margins. This can create conflicts in terms of pricing, promotion, and market focus, which may not align with the exporting company's objectives.
Learn more about strategies here : brainly.com/question/31930552
#SPJ11
Why is awareness alone is not sufficient to combat cognitive
biases? How can we combat cognitive biases in our decision
making?
Awareness alone is not sufficient to combat cognitive biases because cognitive biases are rooted deep in the subconscious mind. Cognitive biases are common errors or flaws in our judgment that lead us to make decisions that are not entirely rational or logical.
Awareness is the first step towards overcoming cognitive biases, but it is not enough. To combat cognitive biases in our decision making, we need to follow these steps:Identify and label the cognitive biases: To combat cognitive biases, we must first identify them. Once we can identify them, we must label them so that we can recognize them when they arise.
Question assumptions: Our biases are often based on untested assumptions. We should ask ourselves what assumptions we are making and challenge them
Take a step back: Sometimes, our biases are so deeply ingrained that we cannot recognize them. In such cases, we should take a step back and seek input from others.
In conclusion, awareness is not sufficient to combat cognitive biases, but it is an essential first step. By identifying and labeling our biases, questioning assumptions, looking for alternative explanations, relying on data instead of memory, and taking a step back, we can combat cognitive biases in our decision making.
to know more about Awareness visit :
https://brainly.com/question/895136
#SPJ11
hich of the following is an example of a positive feedback loop?
A) When GDP growth reaches its peak in the business cycle, then "animal spirits" cause GDP growth to decrease.
B) Firms decrease investment when GDP is decreasing.
C) When consumption spending decreases, firms increase investment spending to boost GDP growth.
I am leaning towards A.
An example of a positive feedback loop is when consumer spending decreases, firms increase investment spending to boost GDP growth. Option C.
The positive feedback loop is a self-perpetuating cycle in which an output amplifies the initial conditions or the perturbation and it encourages further growth. It increases the gain of a system and leads to the accumulation of small changes.
A positive feedback loop is defined as the output or the response that adds to the input or stimulus in such a way that the original response is amplified.
The result of a positive feedback loop is the system escaping its equilibrium state and moving towards a new one in an exponential fashion.
Hence, the right answer is option C. When consumer spending decreases, firms increase investment spending to boost GDP growth.
Read more about Feedback Loop at https://brainly.com/question/11312580
#SPJ11
