Which of the following units would you use to describe the amount of air in a propane tank?

Ampere
Gallon
Gram
Meter

The amino acid that would contribute most significantly to the stability of the tertiary structure of a protein is : cysteine.

Cysteine is a semi essential proteinogenic amino acid that has the formula HOOC−CH−CH₂−SH. The thiol side chain in cysteine participates in enzymatic reactions as a nucleophile.

The formation of disulfide bridges by oxidation of the sulfhydryl groups on cysteine is a very important aspect of the stabilization of protein tertiary structure. This allows different parts of the protein chain to be held together covalently.

Very high doses of cysteine may be toxic to human cells and may lead to death.

To know more about cysteine, refer

https://brainly.com/question/28287226

#SPJ4

The potassium valence electron's atomic number, K=19, corresponds to the correct quartet of four quantum numbers.

An electron is a negatively charged subatomic particle, whether it is linked to or detached from an atom (not bound). Along with neutrons and protons the electron is a constituent particle of an atom and is one of the three primary types of particles found there.

GitHub created the open source package called Electron to help developers create cross-platform desktop applications using JavaScript, HTML, and CSS. By fusing Chromium and Node, Electron achieves this. It is possible to package apps for Mac, Win, and Linux using JavaScript into a single runtime.

To know more about electron  visit:

https://brainly.com/question/1255220

#SPJ4

The buffers with high and low pH had the least change; they are buffers that resist changes in pH.

To learn more about Buffers refer to:

https://brainly.com/question/4177791

#SPJ4

At 15°C, 40 grams of copper have the lowest average kinetic energy.

To learn more about kinetic energy refer to :

https://brainly.com/question/492249

#SPJ1

If an aqueous solution with concentrated hydrobromic acidity contains 48% by mass of HBr, then the molarity of HBr is 8.9 M.

The term "Molarity" is derived from the unit of measurement called a mole, which is used to describe chemical substances. Determining the amount of substance present in a certain chemical solution is done using a concept known as molarity, commonly known as the molecular concentration of a solution.

The most frequent measure of molarity in chemistry is the amount of moles per liter, denoted by the unit notation mol/L or mol/dm3 in SI units. A solution with a level of one mol/L is referred to as 1 molar, or 1 M.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ4

The correct question is :

An aqueous solution of concentrated hydrobromic acid contains 48% HBr by mass. If the density of the solution is 1.50 g/mL, what is its concentration?

A sugar, a phosphate group, and a base with nitrogen make up a nucleoside. A nucleotide is made up of a sugar, a phosphate group, and a base that contains nitrogen.

When preparing samples for chemical analysis, nitrogen is frequently utilized. Liquid sample concentration and volume reduction are accomplished using it. The chemical sector depends on nitrogen as well. It is used to make explosives, nylon, nitric acid, and fertilizers.

Each year, inhaling "air" with insufficient oxygen results in fatalities. Since nitrogen gas makes up 78 percent of the air we breathe, many people believe it to be safe. Nitrogen is only safe to breathe, though, when combined with the right amount of oxygen.

To know more about Nitrogen visit:

https://brainly.com/question/16711904

#SPJ1

The weight of the container after the wax hardens is 0.18 N.

We know that according to the law of the conservation of mass, the mass of an object can neither be created nor destroyed but it can be changed from one form to the other.

Looking at this law, we know that the mass would not change even after the time that the wax must have hardened. The total mass of the wax would have to be a constant.

Total mass would now be;

Mass of the wax + mass of the container

= 3 g + 15 g

= 18 g

Weight = 18/1000 * 9.8 m/s^2

= 0.18 N

Learn more about mass:https://brainly.com/question/13383562

#SPJ1

Volume of 0.20 M sodium acetate is calculated to be 0.82g. Sodium acetate can  be used as additives in food, industry and in buffer solutions.

To determine  pH of a buffer is by using the Henderson–Hasselbalch equation is pH = pKₐ + log([A⁻]/[HA]).

As we know that, pH = pKa + log [salt]/[acid]  

Given pH (4.75) and  pKa (4.75).

Given [acid] = 0.20 M

When the pH = pKa, ratio of [salt]/[acid] =1 because log 1 = 0

Hence,[sodium acetate] = 0.20 M.  

4.75 = 4.75 + log [sodium acetate]/[0.20]

0 = log x/0.2

Hence, x = 0.2 M

To calculate the "amount" in grams, convert 0.20 M to grams using the volume of 50 ml (0.05 L)

0.20 mole/L x 0.05 L = 0.01 moles moles sodium acetate

0.01 moles sodium acetate x 82 g/mole

Volume of 0.20 M sodium acetate= 0.82g

To know more about Henderson-Hasselbalch equation, refer

https://brainly.com/question/26746644

#SPJ4

Examples of ionic bonds include:sodium chloride, or NaCl.sodium bromide, or NaBr.sodium fluoride, or NaF.sodium iodide, or NaI.potassium fluoride, or KF.

Sodium fluoride, often known as NaF, is created when two atoms of sodium and one of fluorine establish an ionic bond.The fluorine atom, with just enough room, accepts the sodium atom's single valence electron as part of this process.

When electrons move from one atom or group to another, they generate positive and negative ions, which are electrostatically attracted to one another. This electrostatic attraction is the basis for the formation of an ionic connection.Example: NaCl, KBr, etc.

To know more about ionic bonds visit:

https://brainly.com/question/11527546

#SPJ4

It takes 3.48 atm of carbon dioxide pressure to maintain the carbon dioxide concentration in a bottle of club soda at 0.10

Pressure on gas An under pressure liquefied gas is housed in a carbon dioxide cylinder. If heated or if the container is hydraulically full due to overfilling, it may rupture (or burst). Local laws typically govern the filling ratio of common gases.

Nondispersive infrared (NDIR) or electrochemical technology are typically used to measure carbon dioxide. The most popular method for measuring CO2 concentrations with higher accuracy over extremely wide ranges up to 100% volume is now NDIR-based carbon dioxide sensors, thanks to advancements in the technology.

Parts per million (ppm) is a unit of measurement for CO2 that represents the amount of CO2 in micromoles per mole of air. Molars per Mole (mol/mol) is the SI unit for CO2 concentration.

CO2 concentration C is 0.10 mol/L.

3.4 * 10-2 moles/L.atm for CO2 at 25 C.

in light of eq (1)

p(CO2)=C/k=0.10 molL-1/3.4 * 10-2 molL-1atm-1

3.48 atm, or p(CO2).

The complete question is,

What pressure of carbon dioxide is required to keep the co2 concentration in a bottle of club soda at 0.10 mol/l at 25 c? The henry's law constant of co2 in water at 25 c is 3.4 × 10-2 (mol/l)/atm?

To learn more about pressure of carbon dioxide refer to:

https://brainly.com/question/11063614

#SPJ1

The pressure of carbon dioxide required to keep it's concentration in a bottle of club soda at 0.1 is 2.9 atm.

Henry's Law states that the partial pressure of a gas above a liquid is proportional to the concentration of the gas dissolved in the liquid at a given temperature (C/p). i.e

C = k*P —————-(1)

where k = the constant of Henry

The following is true:

CO2 concentration C = 0.1 mol/L k for CO2 at 25 C = 3.4 * 10-2 mole/L atm

In accordance with eq(1),

p(CO2) = C/k

= 0.1 molL-1/3.4 *10-2 molL-1atm-1,

p(CO2) = 2.9 atm

Henry's law, a gas law in physical chemistry, says that the amount of dissolved gas in a liquid is inversely proportional to the partial pressure of the gas above the liquid. Henry's law constant is the name of the proportionality constant.

For more information on pressure of carbon dioxide kindly visit to

https://brainly.com/question/11063614

#SPJ1

The image is either representing the state of matter gas, or is representing how air particles spread out evenly across a room over time called equilibrium.

Group 1A (or IA) of the periodic table are the alkali metals: hydrogen (H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr). Group 2 on the periodic table called The Alkaline Earth Metals.

What is alkali metal?

Alkali metals are made up of the chemical elements lithium, sodium, potassium, rubidium, cesium and francium. Together with hydrogen, it forms group 1 of the s block of the periodic table.

Therefore, Group 1A (or IA) of the periodic table are the alkali metals: hydrogen (H), lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs), and francium (Fr). Group 2 on the periodic table called The Alkaline Earth Metals.

To learn more about alkali metal refer the given link:-
https://brainly.com/question/18153051
#SPJ4

An alkene double bond contains two distinct substituent groups on each of the carbon atoms. The carbon-carbon double bond in 1-bromocyclopentene, 4-methyl-2-pentene, and 2-chloro-3,4-dimethyl-3-hexene is numbered in that order.

Organic reactions are chemical processes involving organic compounds. Redox reactions, photochemical reactions, pericyclic reactions, elimination procedures, and substitution reactions are some of the basic types of organic chemistry reactions.

The substance or substances to the left of the arrow in a chemical equation are the reactants. Reactants are substances that are present at the beginning of a chemical reaction. The substance or substances to the right of the arrow are products. A product is the substance that is still present after a chemical process has finished.

To know more about carbon visit:-

https://brainly.com/question/22530423

#SPJ4

The possible products of the Substitution reaction of (r)-3-chloro-3-methylhexane with methanol and heat are A and D.

The substitution reaction of (r)-3-chloro-3-methylhexane with methanol and heat is a nucleophilic substitution reaction. In this reaction, the chlorine atom in (r)-3-chloro-3-methylhexane acts as the leaving group, while the methanol serves as the nucleophile. The reaction proceeds through a series of steps:

1. The chlorine atom in (r)-3-chloro-3-methylhexane is protonated by the hydrogen atom in methanol. This creates a positively charged carbon-chlorine bond.

2. The nucleophilic attack of the methanol molecule onto the positively charged carbon-chlorine bond results in the formation of a covalent bond between the two molecules.

3. The newly formed covalent bond is then broken by the removal of the chlorine atom from the molecule, leaving behind a positively charged methoxy group.

4. The positively charged methoxy group is then protonated by the hydrogen atom in methanol, resulting in the formation of a new covalent bond between the two molecules.

5. Heat is then applied to the reaction mixture, which increases the reaction rate and facilitates the formation of the desired product, (r)-3-methyl hexane-2-methanol.

This substitution reaction is an example of a nucleophilic substitution reaction, which is a type of chemical reaction in which a nucleophile (a molecule with an electron-rich center) replaces a leaving group (a molecule with an electron-poor center) from a substrate molecule.

Hence A and D are the products of the reaction. The image attached below explains Clearly the reaction.

To know more about Substitution reaction, click below:

https://brainly.com/question/10143438

#SPJ4

The acids are generally named depending on the type of acids that are involved. It could be binary, ternary, oxoacids carboxylic acids, and hydroxyl acids.

a) HF is Hydrofluoric acid which is an example of Binary acid: Acids containing two elements, such as hydrochloric acid (HCl), sulfuric acid (H₂SO₄), and nitric acid (HNO₃).

b) Ba(OH)₂ is Barium hydroxide is a basic compound which is alkaline in nature.

c) H₂CO₃ is Carbonic acid which is an example of Ternary acid: Acids containing three elements, such as phosphoric acid (H₃PO₄) and carbonic acid (H₂CO₃).

d) HNO₃ is Nitric acid which is an example of binary acid.

e) H₂SO₄ is Sulfurous acid which is an example of binary acids

f) HBrO₂ is Bromous acid which is an example of an Oxoacid: Acids containing oxygen, such as nitrous acid (HNO₂) and perchloric acid (HClO₄).

g) CH₃COOH is an Ethanoic acid which is an example of Carboxylic acid: Acids containing the carboxyl functional groups, such as acetic acid (CH₃COOH) and formic acid (HCOOH).

To know more about the king of acids, click below:

https://brainly.in/question/5364789

#SPJ4

As - 8 dots and 3- charge, Se - 8 dots and 2- charge, Br - 8 dots and 1-, K - zero dots and +1 charge, Ca - zero dots and +2 charge, Ga - zero dots and +3 charge.

The valence electrons of each element are represented by dots that surround their chemical symbol in a Lewis dot symbol. The Lewis dot symbol's dots correspond to the valence electrons, which correspond to the final digit of the element's group number as in periodic table.

Two chlorine atoms, for instance, share one pair of electrons when they combine to form a chlorine molecule. According to the Lewis structure, each Cl atom contains one shared pair of electrons and pairs of electrons that aren't employed in bonds (known as lone pairs) (written between the atoms).

To know more about  Lewis symbol visit:

https://brainly.com/question/13676318

#SPJ4

Major release of methane hydrate, which is found beneath the ocean floor, may have been the trigger for final temperature increase near the end of the late Paleocene torrid age : True.

Methane is a powerful greenhouse gas and is 80 times more potent at warming than carbon dioxide. Methane is responsible for around 30% of the current rise in the temperature.

Warming of arctic sediments or ocean waters has the potential to cause methane hydrate to dissociate and thus releasing methane in deep water sediments, ocean or atmosphere. One group of archaea's known as methanogens produce methane, a simple organic molecule (CH4).

To know more about methane hydrate, refer

https://brainly.com/question/2500886

#SPJ4

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, the number of protons always equals the number of electrons. The correct option is option 1.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron. The number of protons always equals the number of electrons.

Therefore, the number of protons always equals the number of electrons. The correct option is option 1.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

ZnBr2 is the only compound that will precipitate when combined with LiOH.

In this case,

a reaction between LiOH and ZnBr2 would be as follows;

2LiOH + ZnBr2 ----------> 2LiBr + Zn(OH)2 (s)

Zn(OH)2 is an insoluble salt and will precipitate out in the solution.

Learn more about precipitation reaction refer to :

https://brainly.com/question/13016165

#SPJ1

Nitrogen gas (N2) diffuses into the soil from the atmosphere, and species of bacteria convert this nitrogen to ammonium ions (NH4+), which can be used by plants.

What is soil?

Soil, also commonly referred to as soil or soil, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life. Some scientific definitions distinguish soil from soil, especially by restricting the former term to displaced soil.

Therefore, Nitrogen gas (N2) diffuses into the soil from the atmosphere, and species of bacteria convert this nitrogen to ammonium ions (NH4+), which can be used by plants. Soil, also commonly referred to as soil or soil, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life.

To lean more about soil refer the given link:-

https://brainly.com/question/23968927

#SPJ4

A substance's malleability depends on how elastic it is. A metal becomes more malleable as it becomes more elastic.

Metals are able to be bent and moulded because they are malleable. They are layers of atoms, which is why. When the metal is pressed, bent, or hammered, these layers can glide over one another. While rolling over one another, the atoms can nevertheless maintain the crystal's structure.

Metals are referred to as ductile (can be formed into sheets) and malleable (can be pulled out into wires). The capacity of the atoms to roll over one another into new places without rupturing the metallic bond is the reason for this.

To now ore about  malleability  visit:-

https://brainly.com/question/21234770

#SPJ4

According to Avogadro's number there are 62.53 atoms of chlorine in 1.1x 10[tex]^-21[/tex] moles of Cl atoms.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number or number of moles×Avogadro's number.

ON substitution in above formula number of atoms=1.1×10²¹×6.023×10²³=62.53 atoms

Thus, there are 62.53 chlorine  atoms in 1.1x 10[tex]^-21[/tex] moles of Cl atoms.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ1

The process by which acetyl CoA binds to citrate synthase's binding pocket and the intermediate product of the reaction between acetyl CoA and citrate synthase.

What happens before the acetyl CoA and oxaloacetate reaction is shown below. Analogs of transition states and reaction intermediaries. In a reaction that is mediated by an enzyme, transition state analogues are temporary forms of the substrate. These substrate analogues for the transition state will be such that the enzyme catalyzing the process can readily stabilize them. Complexes called reaction intermediates exist between the time the enzyme binds to the substrate and the time the product is liberated from the enzyme. Reaction intermediates are complexes made up of an enzyme and its substrate (ES) and an enzyme and its product (EP).

Learn more about acetyl here

https://brainly.com/question/12488134

#SPJ4

The aqueous solution is represented by the symbol (aq). Aqueous solution (aq) denotes a substance that has been dissolved in water.

Water acts as the solvent in an aqueous solution. In balanced chemical equation, it is frequently expressed by appending to the corresponding chemical formula. For instance, Na+ + Cl might be used to depict a solution of table salt, or sodium chloride, in water.Aqueous solutions are composed of both water and one or more dissolved substances, Solid, gases, or other liquids can all dissolve in an aqueous solution

Learn more about Aqueous solutions here:

https://brainly.com/question/22280117

#SPJ4

The best benefit of the text structure of the Lewis and Clark journal entries is C. The chronological structure of the text allows the reader to follow their expedition to see how their journey unfolded.

The art or process of placing events or occurrences in chronological order is known as chronology. Typically, it goes from first to last, or from the earliest event to the most recent events.

In the case of a degree certificate holder, for instance, the chronological order of their education is from primary school, which is the oldest certificate, to secondary school, and finally tertiary institution.

Most expository writing, which is a type of writing that narrates, describes, informs, or explains a process, uses chronological order. Place the events in chronological order so that they appear as they did in reality or as they will if you are giving instructions.

In this case, it should be noted that the journal was arranged accordingly as it happened. Therefore, the correct option is C.

Learn more about structures on:

https://brainly.com/question/26719078

#SPJ1

Clark, May 14, 1804]

Monday May 14th 1804 Rained the forepart of the day I determined to go as far as St. Charles a french Village 7 Leags. up the Missourie, and wait at that place untill Capt. Lewis Could finish the business in which he was obliged to attend to at St Louis and join me by Land from that place 24 miles; by this movement I calculated that if any alterations in the loading of the Vestles or other Changes necessary, that they might be made at St. Charles I Set out at 4 oClock P.M.

[Lewis, May 15, 1804]

Tuesday May 15th It rained during the greater part of last night and continued untill 7 OCk. A.M. after which the Prarty proceeded, passed two Islands and incamped on the Stard. shore at Mr. Fifer's landing opposite an Island, the evening was fair.

select the best benefit of the text structure of the lewis and clark journal entries. the compare and contrast structure of the text allows the reader to evaluate the experience both men had on their expedition. the cause and effect structure of the text allows the reader to see how the men's decisions greatly impacted their traveling companions. the chronological structure of the text allows the reader to follow their expedition to see how their journey unfolded. the description structure of the text allows the reader to gain a real appreciation for each place the explorers visited, so it may inspire them to visit those places as well

1.30×10 W is the maximum allowable heat rate that can be generated by the electronic device to maintain the temperature below 85°C for an unfinned package.

Write the equation conduction resistance

Rcond = d/kA.........(1)

Consider the following and substitute the values:

From the table of 'thermo physical properties of selected nonmetallic solids' at a temperature of 300K.

The thermal conductivity of Silicon carbide, k is given by 490 W/m - K

Dimension of the electronic device,

W=10x10⁻⁶m

Find the cross-sectional area

A=W²

= (10x10⁻⁶)² m²

Rcond = 100×10⁻⁹/490×(10×10⁻⁶)^2

           = 2.04 K/W

The equation Convection resistance is given as follows:

Rconv = 1/hA

Consider the following and substitute the values:

Heat transfer coefficient of coolant

h= 1×10 W/m² K and

A= (10×10⁻⁶)² m²

Rcond = 1/10⁵x(10x10⁻⁶)^2

           = 1×10⁵ K/W

Find the heat rate by using the following equation

q= T1- Tinfinity/ Rcond + Rconv...........(3)

  = 2(85-20)/ (2.04+10⁵)

q  = 1.30×10 W

Thus, the maximum allowable heat rate that can be generated by the electronic device to maintain the temperature below 85°C for the unfinned package is 1.30×10 W.

To know more about conduction, click below:

https://brainly.com/question/12767362

#SPJ4

The arrow in a chemical reaction means

A chemical reaction is a procedure that causes one group of chemical components to change chemically into another. Chemical reactions, which can frequently be described by a chemical equation, traditionally include changes that only affect the locations of electrons in the formation and dissolution of chemical bonds between atoms, with no change to the nuclei.

At a specific temperature and chemical concentration, chemical reactions occur at a predictable reaction rate. Because there is more thermal energy available to attain the activation energy required to break bonds between atoms, reaction rates often increase as temperature rises.

The arrow in the reaction is telling us that what we have in the left hand side of the equation has resulted in the equation that we have on the right.

Learn more on chemical reaction here https://brainly.com/question/25769000

#SPJ1

Answer:

A and C

Explanation:

Got it right on the pretest

The low-spin compound in this set of compounds is K₄[Fe(CN)₆].

The spectrochemical series is a list of ligands ranked in order of their ability to stabilize low-spin complexes. According to the series, CN⁻ is the strongest low-spin ligand, followed by Cl⁻, CO₃⁻, and oxalate. Therefore, the compound that is most likely to be low-spin is K₄[Fe(CN)₆]. The other compounds on the list are more likely to be high-spin because the ligands they contain are weaker than CN⁻ at stabilizing low-spin complexes.

Since it is near the high-spin end of the spectrochemical series (i.e. it has a high coordination number and a high oxidation state). The other compounds in the set all have lower coordination numbers and/or lower oxidation states, so they are more likely to be high-spin.

In general, the more electrons an atom has in its outer shell, the more likely it is to be low-spin. Therefore, compounds with higher oxidation states and higher coordination numbers are more likely to be low-spin.

Hence, K₄[Fe(CN)₆] has a low spin with a strong field ligand in the spectrochemical series.

To know more about the spectrochemical series, click below:

https://brainly.com/question/29696232

#SPJ4

The formal charge is a hypothetical charge assigned to an atom in a molecule assuming that all the bonded electrons are equally shared among the atoms forming the two bonds.

The formal charge is the discrepancy between the atom's number of valence electrons and the number it possesses.

Even though we frequently presume they are the same, formal charge and oxidation state are two separate concepts. While the oxidation state regulates the number of electrons exchanged between atoms during the synthesis of a molecule, the formal charge specifies the number of electrons that occur around an atom of a molecule.

When adjacent formal charges are negative or of the opposite sign, Lewis structures are preferred. The Lewis structure with the negative formal charges on the most electronegative atoms is the one to choose from when faced with a choice between numerous Lewis structures with similar formal charge distributions.

To learn more about formal charges visit the link:

https://brainly.com/question/28811018?referrer=searchResults

#SPJ4

The differences between each of the pair is a. secondary and tertiary protein structures of protein.

a. No sharp dividing line exists between

secondary and tertiary structures. Secondary structure refers to the spatial arrangement of amino acids close to one another on a polypeptide chain, whereas tertiary structure refers to the three-dimensional arrangement of all atoms of a polypeptide chain. Among the most important factors in maintaining 3° structure are disulfide bonds, hydrophobic interactions, hydrogen bonding, and salt linkages ; Secondary structure is mainly defines by H-bonding between amino acids in localized regions of a polypeptide or protein

b. Essential amino acids cannot be made by metabolic process of human body, Essential amino acids can be synthesized by human body.

c. The amino acids are divided into 2 categories: those with nonpolar side chains are Non-polar amino acids ( exp. Alanine, Leucine ) , and with polar side chains like acidic side chains ( Aspartic acid) , basic side chains (lysine) and -OH/-SH groups (serine) in side chains are Polar amino acids.

d. A molecule containing two amino acids joined by an amide bond (-CONH-) is called a dipeptide. Those containing 3 amino acids

are called tripeptides. ( di-, tri- indicates No. of Amino acids )

e. Collagen consists of a triple helix made of the repetitious amino acid sequences , it is tertiary structures, whereas a-Helix is Secondary structure.

f. a-Helix, is a type of secondary structure in which a section of polypeptide chain coils into a spiral, most commonly a righthanded spiral. b-Pleated sheet is also

a type of secondary structure in which sections of polypeptide chains are aligned

parallel or antiparallel to one another.

g. Quaternary structure, is The arrangement of polypeptide monomers into

a noncovalently bonded aggregate. Many proteins or polypetides in tertiary structure constitues Quaternary structure.

Learn more about proteins structure here:

https://brainly.com/question/28366854

#SPJ4