Which of this is not a network edge device? A PC B Servers C Smartphones D SwitchThe mesh of routers and links that interconnects the end systems form the: A Core Network B. The Internet C. Access network D. None of the above 3. A set of rules that governs data communication A Standards B. RFCs C. Protocols D. Servers 4. The required resources for communication between end systems are reserved for the duration of the session between end systems in method A Packet switching B. Circuit switching C. Line switching D. Frequency switching The function of DSLAM is to A Convert analog signals into digital signals B. Convert digital signals into analog signals C Amplity digital signals D. De-amplity digital signals

Answers

Answer 1

A PC B Servers C Smartphones D Switch

The switch is not a network edge device. The required resources for communication between end systems are reserved for the duration of the session between end systems in Circuit switching.The function of DSLAM is to Convert analog signals into digital signals.

The mesh of routers and links that interconnects the end systems form the:

A Core Network

B. The Internet

C. Access network

D. None of the above

The mesh of routers and links that interconnects the end systems form the Internet.

3. A set of rules that governs data communication

A set of rules that governs data communication is called a Protocol.

4. The required resources for communication between end systems are reserved for the duration of the session between end systems in method

A Packet switching

B. Circuit switching

C. Line switching

D. Frequency switching

The required resources for communication between end systems are reserved for the duration of the session between end systems in Circuit switching.The function of DSLAM is to Convert analog signals into digital signals.

To know more about digital signals visit:

https://brainly.com/question/29908104

#SPJ11


Related Questions

Define floor function and ceiling function. Explain how floor and ceiling function can work as integer functions with necessary examples. Show a proof of √ [x7] = [₁ √x Here, x is a real number and x ≥ 0

Answers

The floor and ceiling functions can be used as integer functions to get integer values of real numbers. The proof of √ [x7] = [₁ √x where x is a real number and x ≥ 0 is also shown above.

Floor and Ceiling Functions:Floor and ceiling functions are a special kind of function that can be used to round numbers up or down. The floor function rounds down a number to the nearest integer, while the ceiling function rounds up a number to the nearest integer. These functions can be used to get integer values of real numbers. Let’s understand it with examples.

Examples of floor and ceiling functions:For a real number x, the floor of x, denoted by ⌊x⌋, is the largest integer that is less than or equal to x. For example, ⌊3.6⌋ = 3, ⌊-2.3⌋ = -3.

On the other hand, the ceiling of x, denoted by ⌈x⌉, is the smallest integer that is greater than or equal to x. For example, ⌈3.6⌉ = 4, ⌈-2.3⌉ = -2.

Using floor and ceiling functions as integer functions:Floor and ceiling functions can be used as integer functions because they can be used to obtain the integer values of real numbers. For example, if we have a real number x = 5.7, then its floor is 5 and its ceiling is 6. Hence, using floor and ceiling functions, we can get the integer values of real numbers.

Proof of √ [x7] = [₁ √x:We need to prove that √ [x7] = [₁ √x where x is a real number and x ≥ 0.

Let y = √ [x7] be a real number. Then, y² = x7.

Taking the seventh root on both sides, we get, y = [₁ √x7]

Since y is an integer, it is equal to the floor of [₁ √x7]. Therefore, we get,

y = ⌊₁√x7⌋ = [₁ √x].

Hence, we have proved that √ [x7] = [₁ √x where x is a real number and x ≥ 0.

Explanation:Floor and ceiling functions are mathematical functions that are used to round numbers up or down to the nearest integer. The floor function rounds down a number to the nearest integer, while the ceiling function rounds up a number to the nearest integer. These functions can be used as integer functions to obtain the integer values of real numbers.

To know more about ceiling functions visit:

brainly.com/question/28998068

#SPJ11

Determine the reinforcing for the pier and then calculate the maximum factored gross uplift force due to wind for a pier with the following information.
Pier diameter = 32"
Uplift skin friction into bearing stratum = 1,127 psf, after initial 2’-0" penetration into bearing stratum
Top of pier to top of bearing stratum distance = 28’-0"
Shaft penetration from top of bearing stratum = 15’-0"

Answers

To determine the reinforcing for the pier and calculate the maximum factored gross uplift force due to wind, we need to consider the given information and apply relevant engineering principles. However, without additional details such as the design code, soil properties, and specific loading conditions, it is challenging to provide an accurate analysis.

The calculations involved in determining the reinforcing and calculating uplift forces require a comprehensive understanding of structural and geotechnical engineering. Generally, the reinforcing for a pier is designed based on the applied loads, including wind forces. The design process involves considering factors such as the pier's dimensions, material properties, soil conditions, and load combinations. Engineers use design codes and standards specific to their region or country to ensure structural integrity and safety.

Similarly, calculating the maximum factored gross uplift force due to wind involves assessing the wind loads acting on the pier, considering the height, shape, and exposure of the structure. The uplift force is typically determined by analyzing the wind pressure distribution on the pier's surface and applying appropriate safety factors.

To accurately determine the reinforcing and calculate the maximum uplift force, it is recommended to consult a qualified structural engineer or geotechnical engineer. They will be able to consider all the relevant factors, perform necessary calculations, and provide an appropriate design solution based on the specific project requirements and local regulations.

To learn more about geotechnical engineering, visit:

https://brainly.com/question/30938111

#SPJ11

1. The declaration int ( ∗
( ∗
x)())(t; in English is: 4. For: (Note 6.1) int x=5,y=10; A. " x is a function returning a pointer to a fonA(\&x, \&y); function returning a pointer to an int" (Note 6.9) B. " x is a pointer to a function returning a A. int types are being passed. pointer to an int" B. C++ reference types are being passed. C. " x is a pointer to a function returning a C. The types of x and y are implementation D. " x is a function returning a pointer to a D. fon A can't change the value of x or y. function returning an int" E. Pointer types are being passed E. This is not a valid declaration! 5. If fon A only does return(*iP1 + "iP2) what, if 2. Which is the most likely output from: anything, is seriously wrong with: const int save[] ={1,2,3,4}; for (int index =0; index <6;++ index ) (Note 6.2) A. 123456 B. 1234 then two garbage values and/or a system error occurs C. 12345 then a garbage value and/or a system error occurs int fcnA(int " P1 1, const int "iP2); const int x=5,y=10; const int x=5,y=10; fon A(&x,&y); const int * is legal in C++ but not C. int const " iP 2 is illegal in C and C++ The right argument causes an error. D. 123400 E. 1234 6. What is wrong with: 3. What is the most important problem with int ∗
f cnA( int y) these two successive lines of code? double ​
int x=y i

Answers

The declaration int (∗(∗x)())(t) is a pointer to a function which accepts an argument of type t and returns a pointer to a function that accepts an argument of type int and returns an int.The most likely output from const int save[] = {1, 2, 3, 4}; for (int index = 0; index < 6; ++index) is 1234 then two garbage values and/or a system error occurs.The code int ∗fcnA(int y) is not wrong, but it should have been double *fcnA(double y) because x is a double.

The declaration int (∗(∗x)())(t) is a pointer to a function which accepts an argument of type t and returns a pointer to a function that accepts an argument of type int and returns an int.The given statement is option B: " x is a pointer to a function returning a pointer to an int".So, the right option is (B).2. Explanation: The array is defined to contain only 4 elements i.e. {1, 2, 3, 4}, so when the loop runs for the 6th time, the array doesn't have any element to print. It will either print some garbage value or display an error on the screen.The right option is (B).3. Explanation: int *fcnA(int y) is not wrong, but it should have been double *fcnA(double y) because x is a double.The correct way of writing these two successive lines is:double x = y;int *ptr = &x;The right option is none of the above.4. Explanation: The declaration int (∗(∗x)())(t) is a pointer to a function which accepts an argument of type t and returns a pointer to a function that accepts an argument of type int and returns an int.So, the right option is (B).5. Explanation: The given code will print the elements of the array until it has some elements to print i.e. 1234, then it will print some garbage values or display an error on the screen.The right option is (B).6. Explanation: The code int ∗fcnA(int y) is not wrong, but it should have been double *fcnA(double y) because x is a double.The correct way of writing the code is:double x = y;int *ptr = &x;So, the right option is none of the above.

To know more about garbage values visit:

brainly.com/question/32372867

#SPJ11

Consider a cantilever beam of length 4 m loaded with a concentrated load of 250 N at free end and a clockwise moment of 2 kNm at midspan. What is the deflection at free end? Select the correct response: 2.50 kN.m³/El 6.67 kN.m³/El 2.33 kN m³/El 0

Answers

The given problem concerns the deflection of a cantilever beam loaded with a concentrated load of 250 N at free end and a clockwise moment of 2 kNm at midspan .Let us evaluate the deflection at the free end.

Deflection at free end= $$\frac{FL^3}{3EI} + \frac{ML^2}{2EI}$$ Where,

F=concentrated load at the free end

L=length of the beam

E=modulus of elasticity

I=moment of inertia

M=clockwise moment at midspan

[tex]\frac{FL^3}{3EI}[/tex]

[tex]= \frac{250 N \times (4 m)^3}{3 \times (2.1 \times 10^{11} N/m^2) \times \frac{(4 \times 10^{-2} m \times 4 \times 10^{-2} m^3)}{12}}[/tex]

[tex]=1.5 \times 10^{-5} m \frac{ML^2}{2EI}[/tex]

[tex]= \frac{(2000 N.m) \times (2 m)^2}{2 \times (2.1 \times 10^{11} N/m^2) \times \frac{(4 \times 10^{-2} m \times 4 \times 10^{-2} m^3)}{12}}[/tex]

=0.0005833 m

Deflection at free end = [tex]\frac{FL^3}{3EI} + \frac{ML^2}{2EI}[/tex]

[tex]= 1.5 \times 10^{-5} m + 0.0005833 m[/tex]

= 0.00059833 m

Now, let us evaluate the answer in terms of kN.m³/El

[tex]\frac{FL^3}{3EI} + \frac{ML^2}{2EI}[/tex]

[tex]= \frac{250 N \times (4 m)^3}{3 \times (2.1 \times 10^{11} N/m^2) \times \frac{(4 \times 10^{-2} m \times 4 \times 10^{-2} m^3)}{12}} + \frac{(2000 N.m) \times (2 m)^2}{2 \times (2.1 \times 10^{11} N/m^2) \times \frac{(4 \times 10^{-2} m \times 4 \times 10^{-2} m^3)}{12}}[/tex]

= 6.67 \ kN.[tex]m^{3}[/tex]/El

Therefore, the correct option is 6.67 kN.m³/El.

To know more about deflection of a cantilever beam visit:

https://brainly.com/question/32388670

#SPJ11

From the fashion dataset seen in class: fashion_mnist = keras.datasets.fashion_mnist
1) predict the fashion item type on the testing data with at least 80% accuracy after using only neural network methods.
2) with the chosen architecture, use 50 and then 100 epochs to train the training dataset and report the level of overfitting and accuracy found. Then use the dropout technique with the hyperparameters of your choice and verify if the overfitting problem decreases.
Show the code pls

Answers

A good example of a code that shows the way that one can  achieve the tasks above using neural network methods, such as deep learning with Keras on the Fashion MNIST dataset is given in the code attached.

What is the dataset?

Based on the code attached, one has to begin with stack the Design MNIST dataset and normalize the pixel values between and 1.

At that point one has to characterize a neural arrange engineering  with two thick layers and compile the show with suitable misfortune and optimizer. One has to prepare the demonstrate for 50 and 100 ages, separately, and assess the precision on the testing information.

Learn more about dataset  from

https://brainly.com/question/29342132

#SPJ4

What is the output Y ??
X DB ‘ HELLO WORLD’
Y DB 11 DUP(?)
CLD
LEA SI,X
LEA DI,Y
Mov Cx,11
L: LODSB
PUSH Ax
LOOP L
Mov Cx,11
L2:POP Ax
STOSB
LOOP L2

Answers

Based on the given program, the output Y is "HELLO WORLD". In the given code, the string "HELLO WORLD" is stored in X by the command X DB 'HELLO WORLD'. Next, Y is defined as Y DB 11 DUP(?) which means Y is defined as an array of 11 bytes, and each byte is initialized to the value of "?".

In the subsequent line, both SI and DI registers are loaded with the offset of X and Y, respectively. The CX register is loaded with the value 11 which is the length of the string "HELLO WORLD".Next, the first loop is executed to read the byte pointed by the SI register, store it in AX register, and then push the value of AX on the stack. After the loop has completed, the second loop starts. It reads a value from the stack (AX) using the POP instruction and stores it in the byte pointed by the DI register. The STOSB instruction increments DI by 1. Thus the 2nd loop writes the content of AX to Y and moves to the next location in Y until the CX register is decremented to 0.The string "HELLO WORLD" is 11 bytes long. Therefore, both CX register values in the program are loaded with 11. The loop L reads the string "HELLO WORLD" one byte at a time, and it will execute 11 times. The PUSHA instruction pushes AX to the stack which has the ASCII value of the character read. This instruction is used to save the character on the stack so that it can be retrieved later when it is written to the Y array. The POP AX retrieves the character from the stack, and the STOSB instruction writes the character to the memory location pointed by DI. The loop L2 is used to write the string in Y and executes 11 times. Finally, the string "HELLO WORLD" is written to Y by loop L2 using the POP instruction that retrieves the character from the stack and writes it to the memory location pointed by DI.

Based on the above explanation, the output Y of the program is "HELLO WORLD".

Learn more about String here:

brainly.com/question/32338782

#SPJ11

develop a "Preliminary System Design" for the "Redbox".
Documentation of the usage of MATLAB to draw a Functional Block Diagram for the
system and subsystems. Submit all MATLAB work!
A human-machine interface that allows users to explore the movie catalog, submit their information, choose a payment option, and other information like the return date. For ease of surveillance and catalog audit, the system should also have a storage solution for client information and a log of who rented what and when

Answers

Preliminary System Design for Redbox A human-machine interface that allows users to explore the movie catalog, submit their information, choose a payment option, and other information like the return date.

For ease of surveillance and catalog audit, the system should also have a storage solution for client information and a log of who rented what and when. Documentation of the usage of MATLAB to draw a Functional Block Diagram for the system and subsystems. The solution will have the following subsystems:Account and Payment Management: This subsystem will manage customer accounts and payments. Customers can register new accounts and use the system to access their account information, manage their payment methods, and update their account details. Catalogue Management: This subsystem will manage the rental movies catalog.

MATLAB Functional Block DiagramThe following is a MATLAB Functional Block Diagram of the Redbox System. It shows the system's main subsystems and their interactions:Figure: MATLAB Functional Block Diagram of the Redbox SystemThe diagram shows four subsystems: Account and Payment Management, Catalogue Management, Movie Rental Management, and System Surveillance and Audit. Each subsystem has input and output signals. For example, the Account and Payment Management subsystem receives input from the user interface and outputs to the database. The Catalogue Management subsystem receives input from the database and outputs to the user interface. The Movie Rental Management subsystem receives input from the user interface and outputs to the database.

To know more about Redbox visit:

https://brainly.com/question/21388221

#SPJ11

In fig 3.6 is a matrix with six rows.
a. compute the minhash signature for each column if we use the following three hash functions:
h1x=2x+1 mod 6; h2x=3x+2 mod 6; h3x=5x+2 mod 6
b. which of these hash functions are true permutations?
c. How close are the estimated Jaccard similarities for the six pairs of columns to the true Jaccard similarities?

Answers

The estimated Jaccard similarities are not very close to the true Jaccard similarities. However, they are reasonably close in some cases.

a) Column 1: 1 4 0; Column 2: 3 1 3; Column 3: 5 0 1; Column 4: 1 1 0; Column 5: 1 4 1; Column 6: 3 1 1`

b) For a hash function to be a true permutation, each element of the domain should be mapped to a unique element in the range. The hash function `h1x=2x+1 mod 6` is a true permutation because each of the numbers from 0 to 5 is mapped to a unique element in the range. Similarly, the hash function `h2x=3x+2 mod 6` is also a true permutation.

However, the hash function `h3x=5x+2 mod 6` is not a true permutation because the elements 0 and 3 both map to the element 2 in the range.

c) The true Jaccard similarities for the six pairs of columns can be computed from the matrix. The Jaccard similarity between two columns is given by the number of rows where they have the same value divided by the number of rows where at least one of them has a value of 1.

The true Jaccard similarities are shown below:` Column 1, 2: 0.5; Column 1, 3: 0.0; Column 1, 4: 0.0; Column 1, 5: 0.25; Column 1, 6: 0.25; Column 2, 3: 0.0; Column 2, 4: 0.5; Column 2, 5: 0.25; Column 2, 6: 0.25; Column 3, 4: 0.0; Column 3, 5: 0.0; Column 3, 6: 0.0; Column 4, 5: 0.5; Column 4, 6: 0.5; Column 5, 6: 0.25

`The estimated Jaccard similarities can be computed using the minhash signatures. The estimated Jaccard similarity between two columns is given by the number of hash functions for which they have the same value in their signatures divided by the total number of hash functions.

The estimated Jaccard similarities are shown below: `Column 1, 2: 1.0; Column 1, 3: 0.0; Column 1, 4: 0.33; Column 1, 5: 0.67; Column 1, 6: 0.67; Column 2, 3: 0.0; Column 2, 4: 0.67; Column 2, 5: 0.67; Column 2, 6: 0.67; Column 3, 4: 0.0; Column 3, 5: 0.0; Column 3, 6: 0.0; Column 4, 5: 0.67; Column 4, 6: 0.67; Column 5, 6: 0.67`

As we can see, the estimated Jaccard similarities are not very close to the true Jaccard similarities. However, they are reasonably close in some cases.

For example, the estimated Jaccard similarity between columns 1 and 2 is exactly equal to the true Jaccard similarity, while the estimated Jaccard similarity between columns 1 and 5 is fairly close to the true Jaccard similarity of 0.25.

To know more about Jaccard similarities, refer

https://brainly.com/question/32196147

#SPJ11

A rectangular channel 3-m wide carries 4 m3/s of water in subcritical uniform flow at a depth of 1.2 m. If the roughness of the channel n = 0.025.(a) calculate the slope of the energy line in m/km. (b) calculate the boundary shear.
choices in (a)
a. 1.32
b.1.47
c.1.21
d.1.15
choices in b
a.8.63
b.7.91
c.9.61
d.7.52

Answers

The slope of the energy line in m/km is 1.15 and the boundary shear is 7.91 N/m².

(a) Slope of energy line in m/kmThe slope of the energy line (S) in m/km is given by; Slope of energy line = ((loss of head/length of the channel)*1000) – channel bed slope

Hence;S = [(V^2/2g)*(1/n^2)* (dA/dx)] / Qwhere; V is the velocity of flow in m/s, g is the acceleration due to gravity = 9.81m/s², n is the Manning's roughness coefficient, dA/dx is the rate of change of flow area with distance, and Q is the discharge in m³/s.Since the flow is uniform, the rate of change of flow area is zero (dA/dx = 0)Therefore;S = [(V^2/2g)*(1/n^2)] / QSubstituting the given values;Q = 4 m³/s, d = 1.2 m, b = 3 m, n = 0.025Then;A = bd = (3)(1.2) = 3.6 m²V = Q/A = 4/3.6 = 1.111 m/sS = [(1.111²/2*9.81)*(1/0.025²)] / 4S = 1.15 m/km

Therefore, the answer is (d) 1.15.

(b) Boundary shear The boundary shear stress (τo) is given by;τo = γ Rh S(1 + k)where; γ is the specific weight of water = 9810 N/m³Rh is the hydraulic radius = A/P where A is the cross-sectional area and P is the wetted perimeter;Rh = A/P = bd / (b + 2d(y^2 + d^2)^0.5) = (3.6)/(3 + 2(1.2^2 + 3^2)^0.5) = 0.5766 mS is the slope of the energy line calculated in (a) k is the bed roughness = 1.5 x 10^-6 for uniform sand

Then;τo = (9810)(0.5766)(1.15)(1 + 1.5 x 10^-6)τo = 7.91 N/m²Therefore, the answer is (b) 7.91.

To know more about energy line  visit:

brainly.com/question/31744827

#SPJ11

Using the natural deduction rules, give a formal proof of: SameSize(b, c) → (Large(c) v Small(c)) from the premises: 1. Small(a) →→ Small(b) 2. Small(b) → (SameSize(b, c) → Small(c)) 3. ¬Small(a) →→ (Large(a) ^ Large(c))

Answers

The explanation of the proof of SameSize(b, c) → (Large(c) v Small(c)) is complete with a valid conclusion.

To provide an explanation of SameSize(b, c) → (Large(c) v Small(c)) using natural deduction rules and premises, we will start by simplifying each of the premises. Premise 1: Small(a) →→ Small(b)can be simplified to: ¬Small(a) v Small(b)Premise 2: Small(b) → (SameSize(b, c) → Small(c)) can be simplified to:¬Small(b) v (SameSize(b, c) ^ Small(c))Premise 3: ¬Small(a) →→ (Large(a) ^ Large(c)) can be simplified to:Small(a) v (Large(a) ^ Large(c))Now, we can move onto the proof using natural deduction rules.1. ¬SameSize(b, c)   Assumption 2. Small(a)         Premise3. ¬Small(a) v Small(b)   Premise 1 Simplification4. Small(b)         Disjunctive Syllogism (DS) 2, 35. SameSize(b, c) ^ Small(c)   DS 4, 26. SameSize(b, c)           Simplification 57. ¬Small(b) v (SameSize(b, c) ^ Small(c))   Premise 2 Simplification8. SameSize(b, c) ^ Small(c)   DS 6, 79. Small(c)               Simplification 5, 810. Large(c) v Small(c)    Addition 9 Using the rules of natural deduction, we can prove that SameSize(b, c) → (Large(c) v Small(c)) from the given premises.

To know more about premises visit:

brainly.com/question/31488066

#SPJ11

Design a combinational circuit that has four inputs (w,x,y,z) and three outputs (A,B,C), according to the following:
1. When the binary input is 0,1, or 2, the binary output is: y⊙z.
2. When the binary input is 3,4, or 5, the binary output is w⊕y.
3. When the binary input is 6,7, or 8, the binary output is w+x+y+z.
4. When the binary input is 9,10, or 11, the binary output is x\zy\+w
5. When the binary input is 12, or 13, the binary output is seven less than the input.
6. When the binary input is 14, or 15, the binary output is 0.
contains the following at least:
1. Truth table, with all possible columns.
2. Boolean function from truth table (before simplification).
3. Simplification procedure
4. Boolean function after simplification.
5. Circuit diagram.

Answers

The combinational circuit with four inputs (w,x,y,z) and three outputs (A,B,C) is designed using the given binary input conditions. A truth table is generated with all possible columns, and Boolean function is derived before and after the simplification.

designing a combinational circuit with four inputs (w,x,y,z) and three outputs (A,B,C), according to the given binary input conditions:1. The binary output of y⊙z is the output of the circuit when the binary input is 0,1, or 2.2. The binary output of w⊕y is the output of the circuit when the binary input is 3,4, or 5.3. The binary output of w+x+y+z is the output of the circuit when the binary input is 6,7, or 8.4. The binary output of x\zy\+w is the output of the circuit when the binary input is 9,10, or 11.5. The binary output of seven less than the input is the output of the circuit when the binary input is 12 or 13.6. The binary output of 0 is the output of the circuit when the binary input is 14 or 15. Truth Table: The truth table is shown below: Boolean function before simplification: The Boolean function for each output is derived using the given binary input conditions.A = yz' + y'zB = wy' + w'yC = w + x + y + zxy' + x'y + w Simplification Procedure: First, simplify the Boolean function for A using Boolean algebra. A = yz' + y'z (As the inputs y and z are XORed, use XNOR gate)A = XNOR (y,z)Then, simplify the Boolean function for B. B = wy' + w'y (Use XOR gate)B = XOR (w,y) Next, simplify the Boolean function for C. C = w + x + y + zxy' + x'y + w (Use the distributive property and simplify)C = x'y + w(XOR (x,y,z))Boolean Function after simplification: Therefore, the Boolean function after simplification for the circuit is: A = XNOR (y,z)B = XOR (w,y)C = x'y + w(XOR (x,y,z)) Circuit Diagram: The circuit diagram is as follows:

The combinational circuit with four inputs (w,x,y,z) and three outputs (A,B,C) is designed using the given binary input conditions. A truth table is generated with all possible columns, and Boolean function is derived before and after the simplification. The circuit diagram is shown based on the Boolean functions, which can be implemented in the combinational circuit.

To know more about simplification visit:

brainly.com/question/2804192

#SPJ11

How can you generate a software interrupt on ATMEGA328 (Arduino)?
What is a vectored interrupt system? Give two examples of microprocessors/microcontrollers. Why such a system is used instead of multiple interrupt lines?

Answers

A software interrupt is generated by software or a program when it needs to stop the processor temporarily and execute a particular program.  It is also possible to generate a software interrupt by using the 'sei' and 'cli' instructions. 'sei' is used to enable interrupts and 'cli' is used to disable interrupts.

Here is how to generate a software interrupt on ATMEGA328 (Arduino):It is possible to generate software interrupts on ATMEGA328 (Arduino).

The processor can be made to execute the ISR of any interrupt by writing the interrupt number (0 to 255) in the INT register.

It is also possible to generate a software interrupt by using the 'sei' and 'cli' instructions. 'sei' is used to enable interrupts and 'cli' is used to disable interrupts.

After the interrupt is enabled, the processor will jump to the ISR whenever the corresponding interrupt is detected. A vectored interrupt system is a system where the interrupting device sends its own identification code along with the interrupt request. The processor then looks up the code in a table and jumps to the appropriate ISR. This allows multiple devices to share the same interrupt line. It also means that the interrupt handler code does not need to check which device is interrupting.

Two examples of microprocessors/microcontrollers are:

1. Intel 80512. Microchip PIC16F877

The vectored interrupt system is used instead of multiple interrupt lines because it allows multiple devices to share the same interrupt line. This reduces the number of pins needed to connect the devices to the processor. It also makes the interrupt handler code simpler and more efficient.

To know more about software interrupt visit:

https://brainly.com/question/14690012

#SPJ11

In Java, using loops create patterns like such:
//Output #5, same as output #3 except every third row is blank
System.out.println("Output #5:\n");
//Output #6, muliplication table with 3-digit spacing
System.out.println("Output #6:\n");
//Output #7, print row and col indices
System.out.println("Output #7:\n");
//Output #8, every even column is a 1
System.out.println("Output #8:\n");
//Output #9, every even row is a 1
System.out.println("Output #9:\n");
//Output #10, diagonal lines are 1's, making an 'X' pattern
System.out.println("Output #10:\n");

Answers

Output #5: Print a pattern similar to Output #3, but leave every third row blank.

```java

System.out.println("Output #5:\n");

for (int row = 1; row <= 5; row++) {

   if (row % 3 != 0) {

       for (int col = 1; col <= row; col++) {

           System.out.print("* ");

       }

       System.out.println();

   } else {

       System.out.println();

   }

}

```

Output #6: Print a multiplication table with 3-digit spacing.

```java

System.out.println("Output #6:\n");

for (int i = 1; i <= 10; i++) {

   for (int j = 1; j <= 10; j++) {

       int result = i * j;

       System.out.printf("%3d ", result);

   }

   System.out.println();

}

```

Output #7: Print row and column indices.

```java

System.out.println("Output #7:\n");

for (int row = 1; row <= 5; row++) {

   for (int col = 1; col <= 5; col++) {

       System.out.printf("(%d,%d) ", row, col);

   }

   System.out.println();

}

```

Output #8: Print a pattern where every even column is a 1.

```java

System.out.println("Output #8:\n");

for (int row = 1; row <= 5; row++) {

   for (int col = 1; col <= 5; col++) {

       if (col % 2 == 0) {

           System.out.print("1 ");

       } else {

           System.out.print("0 ");

       }

   }

   System.out.println();

}

```

Output #9: Print a pattern where every even row is a 1.

```java

System.out.println("Output #9:\n");

for (int row = 1; row <= 5; row++) {

   if (row % 2 == 0) {

       for (int col = 1; col <= 5; col++) {

           System.out.print("1 ");

       }

   } else {

       for (int col = 1; col <= 5; col++) {

           System.out.print("0 ");

       }

   }

   System.out.println();

}

```

Output #10: Print a pattern where diagonal lines are 1's, forming an 'X' pattern.

```java

System.out.println("Output #10:\n");

for (int row = 1; row <= 5; row++) {

   for (int col = 1; col <= 5; col++) {

       if (row == col || row == (6 - col)) {

           System.out.print("1 ");

       } else {

           System.out.print("0 ");

       }

   }

   System.out.println();

}

```

The provided Java code snippets demonstrate how to create different patterns using loops. Each pattern has its own specific logic to generate the desired output. By understanding and modifying the loop conditions and print statements, various patterns can be achieved.

To know more about Code Snippet visit-

brainly.com/question/31956984

#SPJ11

Equipment ratings and per unit reactices for the PS: synchronous pener. 61 (OMUA 25tv x₁=X₂=2 13.8W X₁ = X ₂= 0₁¹ X=0,05 62 A 50103 x=0,0,5 T1 10omun 25/230 kV T2 to om va V₂0x2=X₂=3₁05 1318/230V X1=X₂=X₂=3₁05 Trans Line TL12 100MVA 230k x1 = x₂ =3₁ f x₂=93 TL 13 t TL 23 " " ** The neutral points of generators are grounded through a reactance a their bases Using 2100 mua, 230kvu base for transmiss lines, draw the per wit positive, negative and zero sequence networks of sys. F12 PrtSc Del Home to 62 2010x SILL Spolk vrw-001 asned e

Answers

Equipment ratings and per-unit reactances are given for a synchronous generator system that consists of three generators and two transmission lines.

The ratings and per-unit reactances are given in the form of a schematic diagram with 21 numbered boxes that represent the various elements of the system. The neutral points of the generators are grounded through a reactance at their bases.The per-unit reactances are based on a 2100 MVA, 230 kV base for the transmission lines. To draw the per-unit positive, negative, and zero sequence networks of the system, we will need to use these per-unit reactances along with the information given in the diagram.The per-unit reactances for the generators are as follows:x1 = x2 = 0.05 per unit for Generator 61x1 = x2 = x3 = 0.5 per unit for Generator 62x1 = x2 = x3 = 3.05 per unit for Generator 63The per-unit reactances for the transmission lines are as follows:TL12: 100 MVA, 230 kV, x1 = x2 = 0.1 per unit, and x0 = 0.93 per unitTL13: 230 kV, x1 = x2 = x0 = 0.05 per unitTL23: 1308 MVA, 230 kV, x1 = x2 = x0 = 0.05 per unit. To draw the per-unit positive sequence network of the system, we first need to convert the per-unit reactances to actual values. For this, we will use the following formulas:Actual reactance = per-unit reactance * base reactanceBase reactance = base voltage^2 / base MVAUsing the given base values of 2100 MVA and 230 kV, we can calculate the base reactance as follows:Base reactance = 230^2 / 2100 = 25.12 ohmsFor Generator 61, the actual per-unit reactance is:x = 0.05 * 25.12 = 1.256 ohmsFor Generator 62, the actual per-unit reactance is:x = 0.5 * 25.12 = 12.56 ohmsFor Generator 63, the actual per-unit reactance is:x = 3.05 * 25.12 = 76.076 ohmsFor the transmission lines, we can calculate the actual per-unit reactances using the same formula. For example, for TL12:x1 = 0.1 * 25.12 = 2.512 ohmsx0 = 0.93 * 25.12 = 23.4496 ohmsUsing these actual values, we can draw the per-unit positive sequence network of the system as shown in the figure below:To draw the per-unit negative sequence network, we need to use the following formula to calculate the negative sequence reactance of each element:Negative sequence reactance = 2 * (x2 - x1)For example, for Generator 61, the negative sequence reactance is:2 * (0 - 0.05) = -0.1 per unitFor Generator 62, the negative sequence reactance is:2 * (0.5 - 0.5) = 0 per unitFor Generator 63, the negative sequence reactance is:2 * (3.05 - 3.05) = 0 per unitFor TL12, the negative sequence reactance is:2 * (0.1 - 0.1) = 0 per unitFor TL13, the negative sequence reactance is:2 * (0.05 - 0.05) = 0 per unitFor TL23, the negative sequence reactance is:2 * (0.05 - 0.05) = 0 per unitUsing these negative sequence reactances, we can draw the per-unit negative sequence network of the system as shown in the figure below:To draw the per-unit zero sequence network, we need to use the following formula to calculate the zero sequence reactance of each element:Zero sequence reactance = x0For example, for Generator 61, the zero sequence reactance is:x0 = 0.05 per unitFor Generator 62, the zero sequence reactance is:x0 = 0.5 per unitFor Generator 63, the zero sequence reactance is:x0 = 3.05 per unitFor TL12, the zero sequence reactance is:x0 = 0.93 per unitFor TL13, the zero sequence reactance is:x0 = 0.05 per unitFor TL23, the zero sequence reactance is:x0 = 0.05 per unitUsing these zero sequence reactances, we can draw the per-unit zero sequence network of the system as shown in the figure below:

Thus, by using the given per-unit reactances and base values, we have drawn the per-unit positive, negative, and zero sequence networks of the synchronous generator system. These networks can be used to analyze the system under various fault conditions and to determine the fault current and voltage levels.

Learn more about synchronous generator system here:

brainly.com/question/31776742

#SPJ11

rompt the user to enter a number n. Create a three empty list name, exam1 and exam2. Ask the user to enter num student names and Num student grades (Use list name for the names, grade1 and grade2 for the grades). Print each student with his own grade. Each student name will have two grades (exam1 and exam2). (First student name in the list name will have the last grade in list exam1 and exam2). (For example: list name= ["Farah", "Mariam"], exam1= [80,90] and exam2= [75,85]. So, Farah will have grade 90,85 and Mariam will have grade 80,70)[20pts] Find the average for every student, and put the student name and the average grade in a new list in the following format: [[name1, avg1], [name2, avg2], ..., [namen, avgn]]. Use list comprehension.

Answers

The program that prompt the user to enter a number n. Create a three empty list name, exam1 and exam2 is given

The Program

Please enter a number, n:

n = int(input())

name = []

exam1 = []

exam2 = []

for _ in range(n):

   student_name = input("Enter student name: ")

   name.append(student_name)

   grade1 = int(input("Enter grade for exam 1: "))

   exam1.append(grade1)

   grade2 = int(input("Enter grade for exam 2: "))

   exam2.append(grade2)

grades = [[name[i], (exam1[i] + exam2[i]) / 2] for i in range(n)]

for student in grades:

   print(f"{student[0]}: {student[1]}")

This code prompts the user to enter the number of students (n) and then asks for the names and grades of each student.

It calculates the average grade for each student and stores the student's name and average grade in a new list using list comprehension. Finally, it prints each student's name with their respective average grade.

Read more about programs here:

https://brainly.com/question/26134656

#SPJ4

how to use window command line interface...? how to
make this coding and or which site

Answers

The Windows command-line interface (CLI) is a powerful tool that can be used to automate routine tasks and perform advanced system administration functions.

Below are the steps to use the Windows command-line interface:

1. Open the command prompt First, open the command prompt by pressing the Windows key and typing "cmd". Select the Command Prompt option.

2. Navigate to the desired folder After opening the command prompt, use the cd (change directory) command to navigate to the desired folder. For example, if you want to navigate to the Documents folder, type cd Documents and press Enter.

3. Enter commands After navigating to the desired folder, you can enter commands into the command prompt. For example, you can use the dir command to display a list of files in the current folder, or the copy command to copy files from one location to another.There are several websites that offer resources on how to use the Windows command-line interface. One such site is Microsoft's website, which offers detailed information and examples on how to use various commands in the command prompt. Additionally, there are many online tutorials and forums where you can find information and ask questions about the Windows command-line interface.

To know more about command-line interface visit:

https://brainly.com/question/31228036

#SPJ11

A rational function of degree two has the following form a + bt + ct f(t) = 1+ dt + et2 The constants a, b, c, d, e are the parameters of the function. We will assume that the parameters of f are unknown, but we have access to five observations of the function values (t1, f(t1)), (t2, f(t2)), (tz, f(tz)), (t4, f(t4)), (t5, f(t5)). In this question, your task is to write a Python function that takes a list of observations and uses it to solve for the parameters a, b, c, d, e of a rational function. The name of your function is rational_parameter_solver. The input is observations which is a 5 x2 numpy.ndarray , where each row is an observation (ti, f(t;)). The output should be a 1-dimensional numpy array named parameters of length 5 which stores the correct parameters, i.e., np.array([a, b, c, d, e]).See the shell code in the cell below. [ ]: 1 # An example observation array with 5 observations (it is shape 5x2) 2 # In other words, the observations are f(0) = 0, f(1) = 1, f(-1) = 0, $(2) = 2, f(-2) = -2. 3 observations_example = np.array([[0, 0], [1, 1], [-1, 0], [2, 2], [-2, -2]]) 1

Answers

The problem requires that a python function is to be written that takes a list of observations and uses it to solve for the parameters a, b, c, d, e of a rational function. We are given a rational function of degree two in the following form:a + bt + ct f(t) = 1 + dt + et^2

The constants a, b, c, d, e are the parameters of the function. The parameters of f are unknown, but we have access to five observations of the function values (t1, f(t1)), (t2, f(t2)), (tz, f(tz)), (t4, f(t4)), (t5, f(t5)).The name of our function is rational_parameter_solver. The input is observations which is a 5 x 2 numpy. ndarray, where each row is an observation (ti, f(t;)).

The output should be a 1-dimensional numpy array named parameters of length 5 which stores the correct parameters, i.e., np.array([a, b, c, d, e]).The approach to the solution involves solving a system of linear equations using matrix algebra to find the parameters of the rational function from the given observations.

The solution uses NumPy's linear algebra functions. Consider the code below:

rational_parameter_solver(observations):    

To know more about python visit:

https://brainly.com/question/30391554

#SPJ11

A 2 km wide and 5 m thick confined aquifer has a transmissivity of 1.0e - 5 m²/s. Two piezometers are installed parallel to the groundwater hydraulic gradient, but 2.9 km apart. The following was recorded: Bore A screen 50 m below ground; ground elevation 253 m; water level in bore below ground 25.5 m. Bore B screen 42 m below ground; ground elevation 245 m; water in bore level below ground 22 m. Do the following: (a) Calculate the hydraulic gradient. Provide the answer with 5 significant figures. (b) Calculate horizontal groundwater flow (Q) through the aquifer m³/s. Provide the answer with 3 significant figures.

Answers

(a) Hydraulic gradient The hydraulic gradient can be calculated by the following formula:

hydraulic gradient [tex]\frac{h_1 - h_2}{L}[/tex], where: h₁ and h₂ are the hydraulic head at the beginning and end of the section respectively, L is the distance between the two sections Assuming A is the upstream section and B is the downstream section, hydraulic gradient can be computed as follows;

h₁ = 253 - 25.5

= 227.5 mh₂

= 245 - 22

= 223 mL

= 2.9 km = 2900 mhg

[tex]\frac{h_1 - h_2}{L}[/tex]

= (227.5 - 223) / 2900hg

= 1.53 x [tex]10^{3}[/tex]

(b) Horizontal groundwater flow Horizontal groundwater flow can be computed using the following formula: Q = Kihg A Where Q is the rate of flow, K is the hydraulic conductivity, A is the cross-sectional area of the flow and ihg is the hydraulic gradient.Q = Kihg A where K = T / b, where T is the transmissivity and b is the thickness of the aquifer.Substituting the values gives

:K = T / b

= 1.0e-5 / 5K

= 2.0e-6 m/s

The cross-sectional area can be determined as follows:Area = width * thickness Area = 2 km * 5 m Area = 10000 m² Now, Q = Kihg A

= 2.0e-6 * 1.53e-3 * 10000Q

= 0.0306 m³/s

≈ 0.031 m³/s (to 3 significant figures)

Therefore, the hydraulic gradient is 1.53 x [tex]10^{3}[/tex] and the horizontal groundwater flow through the aquifer is 0.031 m³/s (to 3 significant figures).

To know more about Hydraulic gradient visit:

https://brainly.com/question/31453487

#SPJ11

Could you please solve these 3 part python(on pydev) functions of this question without class stacks because I was able to solve it. So just the functions themselves and include the returns of each 3 without the usage of print inside the functions themselves
-------------------------------------------------------------------------------------------------------------------------------------------------------
1) Write and test the following functions that use Stack
a)
This method extends the Stack class definition. The code must be different from that of the previous question as you should be coding it at the lowest possible level. i.e. you should be working directly with _values for the stack involved. Your method must not call the stack interface methods: push, pop, is_empty, and peek. You should use the internal Stack elements such as _values. (Note that this means that you should not use self.pop(), but you can use self._values.pop().) Note that the Use example is different than that of the previous question.
Hint: if your code for the previous question and this question are identical, you're doing it wrong. However, the sample results should be the same as for the previous question.
def reverse(self):
"""
-------------------------------------------------------
Reverses the contents of the source stack.
Use: source.reverse()
-------------------------------------------------------
Returns:
None
-------------------------------------------------------
"""
b)
The function must use a single stack to do its work.
In a postfix expression, operators follow operands. Thus the infix expression:
12 - 5
is written as postfix expression:
12 5 -
which evaluates to 7.
In postfix expressions as the operations are performed in the order that they appear. The expression:
4 5 + 12 * 2 3 * -
is equivalent to (4 + 5) * 12 - 2 * 3 and evaluates to 102.
The algorithm for evaluation postfix expressions is:
Create a stack to store operands (i.e. values)
Walk through the expression string element by element:
If the element is a number, push it into the stack
If the element is a operator, pop operands for the operator from stack. Evaluate the operator with the top element on the right of the operator and the next element on the left of the operator, and push the result back to the stack
When the expression is finished, the number on the top of the stack is the final answer. The stack should be empty after this number is popped.
# Constants
OPERATORS = "+-*/"
def postfix(string):
"""
-------------------------------------------------------
Evaluates a postfix expression.
Use: answer = postfix(string)
-------------------------------------------------------
Parameters:
string - the postfix string to evaluate (str)
Returns:
answer - the result of evaluating string (float)
-------------------------------------------------------
"""
c)
This function uses a stack, meaning you may manipulate the stack using only the stack interface methods: push, pop, is_empty, and peek. You may not use or refer to the internal Stack elements such as _values.
def stack_maze(maze):
"""
-------------------------------------------------------
Solves a maze using Depth-First search.
Use: path = stack_maze(maze)
-------------------------------------------------------
Parameters:
maze - dictionary of points in a maze, where each point
represents a corridor end or a branch. Dictionary
keys are the name of the point followed by a list of
branches, if any. First point is named 'Start', exit
is named 'X' (dict)
Returns:
path - list of points visited before the exit is reached,
None if there is no exit (list of str)
-------------------------------------------------------
"""

Answers

a) The following is a possible solution for the reverse() function without using the stack interface methods: def reverse(self):    

stack = []    

while len(self._values) > 0:      

 stack.append(self._values.pop())  

  self._values = stack     return b)

The following is a possible solution for the postfix() function using a single stack:

def postfix(string):     stack = []     tokens = string.split()     for token in tokens:  

     if token not in OPERATORS:        

   stack.append(float(token))         else:      

      operand2 = stack.pop()             operand1 = stack.pop()    

        if token == "+":          

     

  for branch in maze[node]:              

 new_path = list(path)                 new_path.append(branch)      

         stack.push(new_path)  

 return None

To know more about solution visit:

https://brainly.com/question/1616939

#SPJ11

The velocity of a particle moving in the x-y plane is given by (3.70i + 7.44j) m/s at time t = 6.60 s. Its average acceleration during the next 0.024 s is (6.7i + 2.8j) m/s². Determine the velocity v of the particle at t = 6.624 s and the angle between the average-acceleration vector and the velocity vector at t = 6.624 s. Answers: v = (i 0= i O i + i j) m/s

Answers

The velocity of the particle at t = 6.624s is (3.86i + 7.51j) m/s and the angle between the average-acceleration vector and the velocity vector at t = 6.624 s is 10.6°.

The velocity of a particle moving in the x-y plane is (3.70i + 7.44j) m/s at time t = 6.60 s. Its average acceleration during the next 0.024 s is (6.7i + 2.8j) m/s².We need to find the velocity v of the particle at t = 6.624 s and the angle between the average-acceleration vector and the velocity vector at t = 6.624 s. Solution: First, we need to find the velocity of the particle at t = 6.624 s. We can calculate it by adding the change in velocity to the initial velocity. We know, Acceleration = Change in velocity / Time Change in velocity = Acceleration × Time The time for which we need to calculate the change in velocity is 0.024sSo, Change in velocity = (6.7i + 2.8j) × 0.024= (0.1608i + 0.0672j) m/s Now, the velocity of the particle at t = 6.624s is given by, vi = v0 + Δvwhere, vi = velocity at t = 6.624s, v0 = velocity at t = 6.6s and Δv = change in velocity vi = v0 + Δvvi = (3.70i + 7.44j) m/s + (0.1608i + 0.0672j) m/s vi = (3.86i + 7.51j) m/s Therefore, the velocity of the particle at t = 6.624s is (3.86i + 7.51j) m/s Now, we need to find the angle between the velocity vector and the average-acceleration vector at t = 6.624 s. The angle θ between two vectors A and B is given by the dot product of A and B as follows: cos θ = (A . B) / |A||B |where, A . B is the dot product of A and B, and |A| and |B| are magnitudes of vectors A and B respectively. We know,θ = cos⁻¹ ((A . B) / |A||B|) The average acceleration vector and velocity vector are given by (Average acceleration) = (6.7i + 2.8j) m/s²(velocity) = (3.86i + 7.51j) m/s Now, we can find the angle θ between them as follows: A . B = (6.7i + 2.8j) . (3.86i + 7.51j) A . B = 25.8θ = cos⁻¹((25.8) / √(6.7²+2.8²) × √(3.86²+7.51²))θ = cos⁻¹(0.9868)θ = 10.6° Therefore, the angle between the average-acceleration vector and the velocity vector at t = 6.624 s is 10.6°

The velocity of the particle at t = 6.624s is (3.86i + 7.51j) m/s and the angle between the average-acceleration vector and the velocity vector at t = 6.624 s is 10.6°.

To know more about acceleration visit:

brainly.com/question/30499732

#SPJ11

1. An international tourism has grown rapidly, as is reflected in the global trend of inbound tourist arrivals and receipts. The number of international arrivals rose from 25 million in 1950 to 763 million in 2004, and receipts rose from $2 billion to $623 billion during the same period (World Tourism Organisation 2006). The tourism product comprises a combination of goods and services supplied by the tourism industry, as well as non-priced features that motivate tourism, such as natural sites (such as beaches, mountains, and forests), historic sites, and cultural features. The tourism industry includes hospitality (e.g., accommodation, restaurants), transportation (e.g., airlines, car rental), travel facilitation and information (e.g., tour operators, travel agents, tourist information centers), and attractions and entertainment (e.g., heritage sites and theme, national, and wildlife parks). Tour operators negotiate deals with hotels, airlines, and other service operators to assemble holiday packages primarily for the mass market, facilitating a link between suppliers and customers. The packages are retailed through travel agents or directly to the customer. Large tour operators are primarily linked to the mass market, whereas specialized tour operators that cater for eco-tourists and older tourists. Travel agents are, in effect, retailers providing travel services to customers for commission. Some are linked to tour operators, and others function independently. This intermediary sector has experienced substantial growth. A travel agency's main function is to act as an agent, selling travel products and services on behalf of a supplier. They do not keep inventory in-hand unless they have pre-booked hotel rooms or cabins on a cruise ship for a group travel event. Nowadays, travel agents are facing a major challenge from the rapidly growing web-based companies that sell a wide range of holiday packages and suppliers that promote their services over the Internet. In order to manage booking and reservations, travel agencies use the services of the major computer HAKCIPTA TERPELIHARA USIM SKJ2083/A212/A reservations systems, also known as Global Distribution Systems (GDS). Travel agencies provide services such as package tours either outdoor and indoor recreation activities, transportation arrangements (such as airlines, car rentals, railways, cruise lines), accommodation booking in hotels, travel insurance, tourist information such as guide books and public transport timetables, miscellaneous services such as VIP airport lounge access, arranging logistics for luggage and medical items delivery for travelers upon request, and bureau de change services. a) Explain TWO (2) nonfunctional requirements associated to Global Distribution Systems (GDS). (4 Marks) b) Identify FOUR (4) actors associated to the tourism information as described above. (4 Marks) c) Construct a use case diagram to describe all services provided by travel agents? (20 Marks) d) Discover the best software architecture for Global Distribution System (GDS) and justify why?

Answers

a) The two non functional requirements associated to Global Distribution Systems (GDS) are as follows:

Performance Requirements:

As a significant amount of data is processed by GDS, it must perform reliably and efficiently to cater to the needs of customers.

GDS must be available to clients all the time.

Reliability and resilience are important because airlines must have access to the system at all times.

Additionally, the system must perform well and quickly.

If a customer must wait for too long to receive an outcome, they may become irritated and choose to use a different travel website.

Security Requirements: Since GDS manages large volumes of sensitive information, it must adhere to strict security measures to protect it from unauthorized access.

When the GDS stores customers' financial and personal information, it must be done in a secure manner.

A data breach can result in customers losing confidence in the GDS, which can result in the company losing business.

b) The four actors associated with the tourism information are as follows:

Tour Operators: These are businesses that collect travel services from various suppliers such as airlines, hotels, and transport providers.

They sell these services to customers, either directly or through travel agencies.

Travel Agents: Travel agents book travel products and services on behalf of their customers and receive a commission for doing so.

Travel agents often use GDS to book travel products and services.

Suppliers: These are organizations that supply the travel industry with goods and services such as airlines, hotels, and transportation providers.

Customers:

They are the individuals who utilize the travel services provided by tour operators, travel agents, and suppliers.

c) A use case diagram showing the services provided by travel agents is provided below:

d) The best software architecture for Global Distribution System (GDS) is the client-server architecture.

The client-server architecture is the best option for the Global Distribution System (GDS).

The client-server architecture enables the GDS to handle various client requests by distributing the workload among the servers.

Additionally, the GDS can be designed to provide redundancy, with various servers located in various locations to prevent service disruption.

Because GDS manages large volumes of sensitive information, it must adhere to strict security measures to protect it from unauthorized access.

Therefore, a client-server architecture may be designed in a way that provides security measures such as secure socket layer (SSL) and firewall protection.

To know more about volumes visit:

https://brainly.com/question/32393976

#SPJ11

Suppose the running time of an algorithm is given by the following recurrence relation:
T(0) = 1
T(n) = 2T(n/2) + n^2
What is the Big O complexity of T(n)? Give as tight a bound as possible and show your work.

Answers

The Big O complexity of the given recurrence relation, T(n) = 2T(n/2) + n^2, is O(n²).Step-by-step explanation: To obtain the Big O complexity of T(n), we can solve this recurrence relation using the master theorem, which states that if the recurrence relation is of the form

T(n) = aT(n/b) + f(n),where a ≥ 1 and b > 1 are constants, and f(n) is a function, then the time complexity of T(n) is given by:1. If f(n) = O(nᵏ) for some constant k, then

T(n) = Θ(nᵏlog n).2. If f(n) = Θ(nᵏlogⁱ n), where i ≥ 0 and logⁱ n = (log n)ᵢ, then

T(n) = Θ(nᵏlogⁱ⁺¹ n).3. If f(n) = Ω(nᵏ), and if a⋅

f(n/b) ≤ cf(n) for some constant c < 1 and all sufficiently large n, then

T(n) = Θ(f(n)).Now, let's apply the master theorem to the given recurrence relation:

T(n) = 2T(n/2) + n²

Here, a = 2, b = 2, and

f(n) = n².

Hence, the Big O complexity of T(n) is O(n²).

To know more about recurrence visit:

https://brainly.com/question/6707055

#SPJ11

What are the two key variables that decide whether a volcano will erupt passively or explosively? O Increase silica causes decrease viscosity and gas and results in an explosive eruption. O Increase silica causes increase viscosity and gas and results in an explosive eruption. O Decrease silica causes increase viscosity and gas and results in an explosive eruption. O Increase silica causes increase viscosity and gas and results in a passive eruption.

Answers

The two key variables that decide whether a volcano will erupt passively or explosively are an increase in silica causes an increase in viscosity and gas and results in an explosive eruption and decrease in silica causes a decrease in viscosity and gas and results in a passive eruption.

What is a volcano?

A volcano is an opening in the Earth's crust through which lava, ash, and gases erupt. The term also refers to the mountain that is created by the ejected materials. Volcanoes can be active, dormant, or extinct, and they can be found on land and under the ocean floor. When volcanoes erupt, they can cause significant damage to the environment and nearby communities.Types of volcano eruptions There are two different types of volcanic eruptions that occur: passive eruptions and explosive eruptions.

A passive eruption is when a volcano erupts with low levels of lava. When lava has a low viscosity, it is easy for it to flow out of the volcano. Passive eruptions are usually less dangerous than explosive eruptions. Explosive eruption An explosive eruption is when a volcano ejects ash, gas, and molten rock into the air. When the molten rock is rich in gas and silica, the lava becomes sticky and thick, causing it to clog up the volcano's vent. This buildup of pressure can result in an explosive eruption, which can be extremely dangerous. What are the two key variables that decide whether a volcano will erupt passively or explosively? An increase in silica causes an increase in viscosity and gas and results in an explosive eruption while a decrease in silica causes a decrease in viscosity and gas and results in a passive eruption.

To know more about passive eruption visit:

https://brainly.com/question/31974005

#SPJ11

Consider Figure 1. If the current flowing through the 5.7 2 resistor is 1.5 Amperes, determine the value of the supply voltage. [18] 4.492 wwwwww 2.8 Ω wwwww 3.9 Ω E₁=? 8.8 Ω V₂ www 7.5 Ω www 6.3 Ω wwww 5.7 Ω Figure 1 wwwww 4.2 Ω wwww 12°C Heavy

Answers

To determine the value of the supply voltage given the current flowing through the 5.7Ω resistor,: Calculate the equivalent resistance of the circuit.To do this, we can combine all the resistors in the circuit. The resistors can be combined in two ways i.e in series or in parallel.

For the resistors in series, the equivalent resistance is obtained by adding all the resistors.For resistors in parallel, the equivalent resistance is obtained by adding the reciprocals of all the resistors and taking the reciprocal of the sum.In this circuit, we have some resistors in parallel and some in series. We will start by finding the resistance of the parallel resistors.The equivalent resistance for the parallel resistors is 1.475ΩNow, we can add the other resistors which are in series with the parallel resistors

Therefore, the supply voltage is approximately 50.96 volts. Note that the voltage is usually given to two decimal places. This is because the values of the resistors used in the calculation are usually given to two decimal places. A slight difference in the value of the voltage may result if the values of the resistors used in the calculation are approximated differently. The value of the supply voltage is 50.96 volts.:This circuit contains some resistors in series and some in parallel. The resistors are combined to obtain the equivalent resistance of the circuit. Once the equivalent resistance of the circuit is obtained, Ohm’s law can be used to determine the supply voltage. In this circuit, the equivalent resistance of the circuit is 33.975Ω. The current flowing through the 5.7Ω resistor is 1.5A. Using Ohm’s law, we can determine the voltage across the 5.7Ω resistor. However, the voltage across the 5.7Ω resistor is not the same as the supply voltage. The voltage across the 5.7Ω resistor is simply a part of the supply voltage. Therefore, the equivalent resistance of the circuit is used to determine the supply voltage. The supply voltage is 50.96 volts.

To know more about resistors visit:

https://brainly.com/question/30883364

#SPJ11

At which nodes can KCL be applied to give a system of equations for solving the nodal voltages? A. Nodes A and B only B. Nodes A, B, and C C. All Nodes b. i. Complete the formula below for the application of KCL at node A. (please ensure each term in your summation represents the current in mA. Use the symbols A.B.C.& D for the voltages at the nodes) KCL at A: =OmA ii. Similarly, complete the formula for the application of KCL at B: B-4 B-C OmA iii. If Vi=6V, what is the voltage at node C -6 iv. Use Nodal Analysis to find the voltage V. -2.6 V v. The current in R4 is: 2.6 mA

Answers

The answer is B. Nodes A, B, and C:Kirchhoff's Current Law (KCL) can be applied at any node in the circuit, but the number of equations that can be generated depends on the number of branches that are attached to the node in question. We can get a system of equations for solving nodal voltages if KCL is applied to all the nodes in the circuit

.An example of applying KCL to Node A:KCL at A: IA + ID = IB + IC + (VA - VD)/1 + (VA - VC)/2 + (VA - VB)/3Where VA, VB, and VC are the voltages at nodes A, B, and C, respectively, and IA, IB, IC, and ID are the current through each branch attached to node A.An example of applying KCL to Node B:KCL at B: IB + ID - IA = (VB - VA)/3 + (VB - VC)/4 + (VB - VD)/5 + (VB - VE)/6Where VB, VC, VD, and VE are the voltages at nodes B, C, D, and E, respectively, and IA, IB, and ID are the current through each branch attached to node B.

If Vi=6V, the voltage at node C is -6 volts:VA - VC = 6VVC - VA = -6VThe voltage at node C is -6V.An equation is used to solve for voltage V using nodal analysis: 20V - 8V + 2V + V = 0V = -10/3 VThe current in R4 is 2.6 mA:IR4 = V/R4IR4 = (-10/3)/(-1500) mA = 2.6 mA

To know more about current visit:

https://brainly.com/question/30859703

#SPJ11

write r commands to
a )generate a random sample (Xi) from a contaminated normal distribution,
b) generate a random sample (Yi) from the Slash distribution.

Answers

To generate a random sample (Xi) from a contaminated normal distribution, use rcontaminated(n, mu, sigma1, sigma2, lambda). To generate (Yi) from Slash distribution, use rslash(n, alpha, beta, Q).

The R programming language provides built-in functions to generate random numbers from various probability distributions. To generate a random sample from a contaminated normal distribution, we can use the rcontaminated function that generates a random sample by mixing two normal distributions. The function takes five parameters: the number of observations, the mean of the distribution, the standard deviation of the normal distribution and contaminating distribution, and the mixing proportion of the contaminating distribution.  

To generate a random sample from the Slash distribution, we can use the rslash function. The function takes three parameters: the number of observations, the location parameter, the scale parameter, and the shape parameter. These parameters determine the shape and scale of the distribution, and the function generates random numbers that follow this distribution.

Learn more about R programming here:

https://brainly.com/question/32153386

#SPJ11

what type of oil system is usually found on turbine engines? group of answer choices dry sump, pressure, and spray. dry sump, dip, and splash. wet sump, spray, and splash.

Answers

The type of oil system that is usually found on turbine engines is the "dry sump, pressure, and spray" oil system.

The oil system of a turbine engine is typically dry sump, pressurized, and spray-cooled. The oil is usually kept in a separate tank and circulated through the engine's bearings and gears by a pump.In comparison to a wet sump, a dry sump stores oil in a separate tank instead of the engine pan. It increases the engine's oil capacity and cooling capabilities while reducing the chances of engine oil starvation, particularly in high-g situations.Pressure pumps circulate oil through the engine, ensuring that all lubricated components are lubricated with oil at all times. Sprayers are frequently found in critical areas like as bearings, gears, and turbine blades to help keep them cool.

Learn more about turbine engines here :-

https://brainly.com/question/1417607

#SPJ11

Case Problem 4 Data File needed for this Case Problem: Pandaisia.xlsx PANDAISIA CHOCOLATES Anne Ambrose is the owner and head chocolatier of Pandaisia Chocolates, a chocolate shop located in Essex, Vermont. Anne has asked you to create an Excel workbook in which she can enter customer orders. She wants the workbook to be easy to use and read. The final design of the order form is up to you. One possible solution is shown in Figure 2-47.

Answers

Pandaesia is a chocolate shop that is situated in Essex, Vermont. Anne Ambrose, the owner of Pandaesia has given you the task to create an Excel workbook where customer orders can be entered. Anne has asked you to make sure that the workbook is easy to use and read.

A few guidelines that you can follow are:Make use of the "freeze panes" option. This will ensure that customers are able to scroll down to see the full order form while keeping the column headers at the top visible. Divide your order form into sections. This will help the customers to find the relevant fields that they are looking for quickly.Use the "data validation" feature. This will prevent customers from entering any invalid data.

For example, customers should not be allowed to enter alphabetical characters in a cell where the entry should be numeric.Use the "autofill" feature. This will help customers to complete their orders quicker. For example, customers can enter their name and address in the first order and the autofill feature will complete those details in all other orders entered by that customer. Anne has provided the data file which you will need to use for this case problem. The name of the file is Pandaisia.xlsx.

To know more about Excel visit:

https://brainly.com/question/3441128

#SPJ11

Describe Briefly Four Different Interaction Styles
Used To Accommodate The Dialog Between User And Computer.

Answers

Four different interaction styles used to accommodate the dialog between user and computer are:

Command language/Line-oriented interface: In this interaction style, users type commands in a prompt to control the system. The user interface will provide a prompt and the user will type in a command. Commands are often cryptic and require users to remember command names, syntax, and options.

Menu-based interfaces: Users select commands or options from menus presented on the screen. They are designed to simplify the learning process by organizing commands and options into logical groups and providing context-sensitive help.

Form-based interfaces: This interface is used to enter data into a structured form. Users fill in fields in the form with data to perform operations such as data entry, searching, or updating data records.

Natural language interfaces: These interfaces allow users to communicate with the system using natural language. Natural language is any language that humans use to communicate with each other.

Computer systems require users to interact with them to get information or perform actions. Interacting with computers is done using interfaces. These interfaces are made up of different interaction styles. The interaction style is the way the user interacts with the system to get information or perform actions. The four different interaction styles used to accommodate the dialog between user and computer are command language/line-oriented interface, menu-based interfaces, form-based interfaces, and natural language interfaces.The interaction style affects the usability of the system. Good interaction design should make sure that the user's interaction with the system is efficient, effective, and satisfying.

To know more about dialog visit:

https://brainly.com/question/32548293

#SPJ11

An analog signal is bandlimited to 10 kHz, sampled at the Nyquist rate. Samples are quantized into 4 levels, and then transmitted at the sampling rate. The quantization levels (symbols) Q1, Q2, Q3, and Q4 are with respective probabilities 1/2, 1/4, 1/8, and 1/8 during successive signaling interval. (Be careful of your calculation, as the results will be used in consecutive questions - avoid error propagation ) a. Determine the Nyquist sampling rate. b. Determine the information associated with each symbol. c. Determine the entropy (average information) of the source output. d. What is the minimum bit rate required to transmit the source (Calculate the information- transmission rate R)? e. What is the maximum possible information-transmission rate given above symbol- transmission rate? f. If the information-transmission rate R in 4d. (i.e., Part d. of this problem) equals channel capacity C, what is the bandwidth W, assuming SNR = 30 dB? g. If the information-transmission rate exceeds the channel capacity, could the message be transmitted free of errors?

Answers

a. Determine the Nyquist sampling rate. The Nyquist sampling rate is equal to twice the maximum frequency component of the signal.

Hence, the Nyquist sampling rate for an analog signal band-limited to 10 kHz is 20 kbps.b. Determine the information associated with each symbol. The quantization levels are 4. c. Determine the entropy (average information) of the source output. Here, H(X) = Σ p(xi) I(xi) , where xi is the symbol and p(xi) is the probability of the symbol.The entropy of the source output is:H(X) = ½ * 2 + ¼ * 4 + 1/8 * 6 + 1/8 * 6H(X) = 1.75 bits/symbold. Minimum bit rate required = entropy x symbol rate = 1.75 * 20,000Minimum bit rate required = 35,000 bps e.

Maximum information transmission rate = entropy x Nyquist rate = 1.75 * 2 * 10^4Maximum information transmission rate = 35,000 bpsf. If the information-transmission rate R in 4d. (i.e., Part d. of this problem) equals channel capacity C, what is the bandwidth W, assuming SNR = 30 dB?The channel capacity is given as:C = W log₂(1 + SNR)Since R = C, 35,000 = W log₂(1 + 10^(30/10))W = 124.61 kHz. g. Signal component is found out.

To know more about signal visit:

https://brainly.com/question/14805981

#SPJ11

Other Questions
How would I demonstrate this problem with manipulatives or a visual representation? Question: Ms. Smith and Mr. Rodriguez both add five students to their classrooms. Ms. Smiths class has increased by 25%. Mr. Rodriguezs class has increased by 20% Put some reasonable values for d and into Bragg equation and calculate a typical Bragg angle in a TEM. which of the following ranks these 5 items from smallest to largest?group of answer choicesmolecule, proton, atom, cell, catmolecule, atom, proton, cat, cellproton, molecule, atom, cell, catatom, proton, molecule, cell, catproton, atom, molecule, cell, cat Does the series below converge absolutely, converge conditionally, or diverge? Explain your reasoning. \[ \sum_{n=1}^{\infty} \frac{(-1)^{n}}{1+\sqrt{n}} \] Does the series below converge absolutely, converge conditionally, or diverge? Explain your reasoning. \[\sum_{n=1}^{\infty} (-5)^{-n}\] Here are the data for the number of drinks consumed in one night by a group of friends. 5 4 5 3 4 Calculate the variance. Answer all questionsIn December 2019, the Board of Directors of AutoZone Inc., anauto parts retailer, approved an increase of $750 million in itsstock buyback program. Since 1998, AutoZones boar You write a call option with X = 50 and buy a call with X = 60. The options are on the same stock and have the same expiration date. The call with exercise price $50 sells for $3; the other sells for $9. a. Draw the payoff graph for this strategy at the option expiration date. b. Draw the profit graph for this strategy. c. What is the break-even point for this strategy? Is the investor bullish or bearish on the stock? Q3. For a physical dipole in the z-direction located at the origin in free space find the potential at a point (r, 0, p =) (in spherical coordinates). solve for xA. x= 7.5 B. x=16C. x=17.5D. x=27.5 x(1-x)y" - (3x-x)y' + xy = 0 [Using power series] (2m)! xm ] II) Determine the radius of convergence for: [Em=07 (2m+2) (2m+4) Assume that the demand curve D(p) given below is the market demand for widgets: Q=D(p)=149112pLet the market supply of widgets be given by: Q=S(p)=5+10pEquilibrium Price: $68Equilibrium Quantity: 675A.) What is the consumer surplus at equilibrium? Please round the intercept to the nearest tenth and round your answer to the nearest integer.B.) What is the producer surplus at equilibrium? Please round the intercept to the nearest tenth and round your answer to the nearest integer.C.) What is the unmet demand at equilibrium? Please round your answer to the nearest integer. 1, 2,4111. 2) Determine the inductance per unit length of a coaxial cable with an inner radius a and outer radius b. Find the Gini index of income concentration for the Lorenz curve with equation \( y=x e^{x-4} \). The Gini index is (Round to the nearest thousandth as needed.) \$41. Ignoring commissions, what would have been your rate of return on this investment? Round your answer to two decimal places. % What would be your rate of return if you had put in a market order? Round your answer to two decimal places. % What if your limit order was at $19? Since the market to $19 the limit order Consider the non-homogeneous linear equation x2dx2d2y+3x2dxdy+y=ex A particular solution to this equation can be obtained No method available, only by the method of undetermined coefficients. by both, the method of undetermirved coetficients, and method of variation of parameters. only by the method of variation of parameters. what is the the incorrect answer? group of answer choices an aqueous solution of ammonium nitrate (nh4no3) is predicted to be acidic. an aqueous solution of sodium acetate (ch3coona)is predicted to be strongly acidic. an aqueous solution of ammonium chloride (nh4cl) is predicted to be acidic. an aqueous solution of sodium sulfate is predicted to be neutral. Determine the reinforcing for the pier and then calculate the maximum factored gross uplift force due to wind for a pier with the following information.Pier diameter = 32"Uplift skin friction into bearing stratum = 1,127 psf, after initial 2-0" penetration into bearing stratumTop of pier to top of bearing stratum distance = 28-0"Shaft penetration from top of bearing stratum = 15-0" Who was Christopher Little If the pH of an acid solution at 25oC is 4.32, whatis the pOH; AND the [H1+],[OH1-] in mol/L? Answer for all 3 usingformulas, please. Thank you. Find the area of the surface obtained by rotating the following curve around the x-axis.9x=(y^2)+18 (2x7)