Answer:
C
Explanation:
When Beta decay happens, the atomic number of an element goes up, and that means there is an extra proton. A is not the answer because unstable atoms cause decay. B is also not correct because this is what happens in Beta decay: a neutron becomes a proton. D is not correct because an electron is actually emitted from the nucleus.
Two flasks are connected by a closed valve. One contains gas particles and the other contains a vacuum. If the valve is opened such that the particles move until they fill both flasks, the process by which the particles can reconvene entirely in one of the flasks is:
Answer: The process by which the particles can reconvene entirely in one of the flasks is: NONSPONTANEOUS.
Explanation:
The spontaneity of a process can affect the distribution of energy and matter within the system. Different chemical or physical processes have the natural tendency to occur in one direction under a given set of conditions. For example:
--> when water is pour down a hill it naturally flows down but it requires outside energy maybe from a water pump to flow up the hill and ,
--> during an iron rust, iron that is exposed to atmosphere will corrode, but rust is not converted to iron without intentional chemical treatment.
Therefore, a spontaneous process is one that occurs naturally under certain conditions. While a NONSPONTANEOUS process, on the other hand, will not take place unless it is initiated by the continual input of energy from an outside source. A process that is spontaneous in one direction under a particular set of conditions is nonspontaneous in the REVERSE direction.
From the two flasks that where connected through a valve, once the valve was opened, the gas spontaneously becomes evenly distributed between the flasks. To reverse this, it would require an external energy making the reconvening of the particles back to the first flask a NONSPONTANEOUS PROCESS .
How many grams of H₂SO₄ are contained in 2.00 L of 6.0 M H₂SO₄?
Please explain and show work.
Answer:
1176 grams
Explanation:
nH2SO4 =2*6=12 mol
mH2SO4=12*98=1176 grams
Answer:
solution given:
molarity of H₂SO₄=6 M
volume=2L
no of mole =6M*2=12mole
we have
mass =mole* actual mass=12*98=1176g
the mass is 1176g.
Carboxylic acid derivatives undergo hydrolysis to make carboxylic acids.
a. True
b. False
Answer:
TRUE
Explanation:
All carboxylic acid derivatives have in common the fact that they undergo hydrolysis (a cleav- age reaction with water) to yield carboxylic acids. with hydroxide ion to yield a carboxylate salt and an alcohol. The carboxylic acid itself is formed when a strong acid is subsequently added to the reaction mixture.
PLS MARK BRAINLIEST
Diisopropyl ether reacts with concentrated aqueous HI to form two initial organic products
a. True
b. Fasle
Answer:
True
Explanation:
The reaction between Diisopropyl ether and concentrated aqueous HI forms two initial organic products as shown in the image attached.
The hydrogen of the HI becomes attached to the oxygen in the ether leading to a cleavage of the C-O bond to yield the first compound. The I^- become attached to the other moiety in the original molecule to yield the second compound as shown in the image attached.
An important difference between fuel cells and batteries is that batteries _______. Select the correct answer below: do not require a continuous source of fuel require a continuous source of fuel are able to expel products are constantly resupplied with reactants
Answer: the correct option is that batteries (do NOT require a continuous source of fuel).
Explanation:
A battery can be classified as an electrochemical cell that has the ability to produce electric current. They do NOT require a continuous supply of fuel because it contains all the reactants needed to produce electricity. Below are some examples of batteries that are commonly used:
--> Primary battery: This is a single use battery because it can't be recharged. A typical example is the dry cell.
--> Secondary battery: This type of battery can be recharged. They are used as a power source for smartphones, electronic tablets, and automobiles.
A FUEL CELL is known as a device that converts chemical energy into electrical energy. Fuel cells are similar to batteries but require a continuous source of fuel, often hydrogen. They will continue to produce electricity as long as they are constantly resupplied with reactants. Hydrogen fuel cells have been used to supply power for satellites, space capsules, automobiles, boats, and submarines.
Answer:
accumulate reaction byproducts
Explanation:
Batteries accumulate reaction byproducts. Fuel cells are similar to batteries but require a continuous source of fuel, often hydrogen. They will continue to produce electricity as long as fuel is available. Hydrogen fuel cells have been used to supply power for satellites, space capsules, automobiles, boats, and submarines. A battery is an electrochemical cell or series of cells that produces an electric current.
what is the functions of sodium chloride oxalate in blood sample container
Answer:
To prevent the coagulation of blood
Explanation:
Sodium chloride oxalate in blood sample containers exists to prevent the coagulation of blood samples being collected (for analytical purposes).
The compound works by chelating or combining with blood's calcium which is necessary for blood to coagulate (change from flowing liquid to gel-like substance).
Calcium ions are known to be responsible for the activation of certain coagulation factors such as FXIII and therefore, play important roles in homeostasis during blood clotting. Hence, the removal of the calcium in blood disrupts the homeostatic process of clotting formation and results in the blood not being able to coagulate.
convert 36.52 mg to ?___ g
Answer:
0.0365 is your answer
Explanation:
hope it will help uAnswer:
365.2gㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤㅤ
State the different radiations emitted by radioactive elements.
A) Draw a conclusion about the relationship between enzyme activity and reaction temperature.
B) Provide an explanation for why we see a flattening of the curve for the 75 degree reaction after 3 minutes.
Answer:
Direct relationship.
Explanation:
There is direct relationship between enzyme activity and temperature of reaction. Direct relationship means if one factor is increases the other factor is also increase and vice versa. In chemical reactions, the rate of an enzyme action increases as the temperature of the chemical reaction also increases. we see a flattening of the curve for the 75 degree reaction after 3 minutes because the enzyme action is not working at that temperature or in other words, this temperature is not suitable for the enzyme activity.
In nature, one common strategy to make thermodynamically unfavorable reactions proceed is to couple them chemically to reactions that are thermodynamically favorable. As long as the overall reaction is thermodynamically favorable, even the unfavorable reaction will proceed.
Part A
Consider these hypothetical chemical reactions:
A⇌B,ΔG= 14.8 kJ/mol
B⇌C,ΔG= -29.7 kJ/mol
C⇌D,ΔG= 8.10 kJ/mol
What is the free energy, ΔG, for the overall reaction, A⇌D?
Part B
Firefly luciferase is the enzyme that allows fireflies to illuminate their abdomens. Because this light generation is an ATP-requiring reaction, firefly luciferase can be used to test for the presence of ATP. In this way, luciferase can test for the presence of life. The coupled reactions are
luciferin+O2ATP⇌⇌oxyluciferin+lightAMP+PPi
If the overall ΔG of the coupled reaction is -7.50 kJ/mol , what is the equilibrium constant, K, of the first reactions at 11 ∘C ? The ΔG for the hydrolysis of ATP to AMP is −31.6 kJ/mol.
Answer:
[tex]\triangle G= -6.7 KJ/mol[/tex]
Explanation:
From the question we are told that:
Chemical Reactions:
X=A⇌B,ΔG= 14.8 kJ/mol
Y=B⇌C,ΔG= -29.7 kJ/mol
Z=C⇌D,ΔG= 8.10 kJ/mol
Since
Hess Law
The law states that the total enthalpy change during the complete course of a chemical reaction is independent of the number of steps taken.
Therefore
Generally the equation for the Reaction is mathematically given by
[tex]T = +1 * X +1 * Y +1 *Z[/tex]
Therefore the free energy, ΔG is
[tex]\triangle G=1 * \triangle G*X +1 * \triangle G*Y +1 * \triangle G *Z[/tex]
[tex]\triangle G= +1 * (14.9) +1 * (-29.7) +1 * (8.10)[/tex]
[tex]\triangle G= -6.7 KJ/mol[/tex]
Butanal, an aldehyde, can be made from 1-bromobutane, but it requires two reactions in sequence. What are the two reagents that can be used to make butanal from 1-bromobutane if reagent A is first reacted with 1-bromobutane and then the product of that reaction, is reacted with reagent B.
Answer:
See explanation and image attached
Explanation:
My aim is to convert 1-bromobutane to butanal. The first step is to react the 1-bromobutane substrate with water. This reaction occurs by SN2 mechanism to yield 1-butanol. Hence reagent A is water.
1-butanol is now reacted with an oxidizing agent such as acidified K2Cr2O7 (reagent B) to yield butanal. Note that primary alkanols are oxidized to alkanals.
These sequence of reactions are shown in the image attached.
How many grams are of aluminum nitrate are contained in 0.150 moles of Al(NO3)3?
Answer:
31.95 g
Explanation:
find the molar mass of Al(NO3)3
(Al = 27, N = 14, O = 16)
molar mass of Al(NO3)3 = 27+ (14+16×3)×3
= 213 gmol^-
mass = 213 ×0.15
= 31.95g
Difficulty(Level:1)
Which option below defines the law of conservation of energy
-Energy is created but some is always lost when doing so
-Energy or Chakra must be conserved to accomplish difficult ninjitsus
-Energy constantly moves toward a form of disorder
-Conserve Energy or the world will end
-Energy is never created or destroyed, it just changes forms.
Answer:
I say the last option
Explanation:
I hope this help let me know if you have any questions
6. Who stated that matter is not composed of particles
After careful consideration your answer is...
Leucippus and Democritus
*Hope I helped*
~Alanna~
Answer:
The first theories of matter were put forward by Empedocles in 450 BC, he proposed that all matter was composed of four elements - Earth, air, fire and water. Later, Leucippus and Democritus suggested matter was made up of tiny indestructible particles continuously moving in empty space.
Explanation:
Which of the following is most likely to happen when a sound wave reflects
off a hard surface? (Assume that neither the source of the sound nor the hard
surface is moving.)
A. A change in speed
B. An echo
C. A change in pitch
D. A beat frequency
В
an echo is caused by the fact that waves can be reflected by solid surfaces, this is due to the dynamic pattern of rarefactions and air seals near the reflecting surface
Which shampoo would be displayed third?
Answer:
Biolage is the answer
Explanation:
Because it's price is third most
A eudiometer is used to collect hydrogen gas in a chemical reaction, as in your Exp 7. The volume of the gas in the tube (when pressure is held
constant) is 479.10 mL. The pressure of the atmosphere during the experiment is 758.3 mmgHg, and the temperature of the water and gas is
19.0*C. The water vapor pressure at this temperature is 16.5 torr.
Calculate the mass of hydrogen, in mg, collected.
Answer:
39.29 mg
Explanation:
Step 1: Calculate the partial pressure of hydrogen
The pressure of the atmosphere is equal to the sum of the partial pressures of the water and the hydrogen. (1 Torr = 1 mmHg)
P = pH₂O + pH₂
pH₂ = P - pH₂O = 758.3 mmHg - 16.5 mmHg = 741.8 mmHg
We will convert it using the conversion factor 1 atm = 760.0 mmHg.
741.8 mmHg × 1 atm/760.0 mmHg = 0.9761 atm
Step 2: Convert 19.0 °C to Kelvin
We will use the following expression.
K = °C + 273.15 = 19.0 + 273.15 = 292.2 K
Step 3: Calculate the mass of hydrogen
First, we will calculate the moles of hydrogen using the ideal gas equation.
P × V = n × R × T
n = P × V / R × T
n = 0.9761 atm × 0.47910 L / (0.08206 atm.L/mol.K) × 292.2 K = 0.01950 mol
The molar mass of hydrogen is 2.015 g/mol. The mass of hydrogen is:
0.01950 mol × 2.015 g/mol = 0.03929 g = 39.29 mg
Calculate the heat change in calories for melting of 0.30 kg of water at 0*C. The
heat of fusion for water is 80 cal/g. The heat of vaporization of water is 540 cal/g.
The specific heat capacity of water is 1.00 cal/g*C.
Answer: 24 kcal
Explanation:
Given
Mass of water [tex]m=0.3\ kg[/tex]
Temperature of water [tex]T_1=0^{\circ}[/tex]
Heat of fusion [tex]L_f=80\ cal/g[/tex]
Heat of vaporization [tex]L_v=540\ cal/g[/tex]
Specific heat of water [tex]c=1\ cal/g.^{\circ}C[/tex]
Heat require to melt the ice is
[tex]\Rightarrow Q=mL_f\\\Rightarrow Q=0.3\times 1000\times 80\\\Rightarrow Q=24000\ cal\ or\ 24\ kcal[/tex]
Thus, 24 kcal of heat is required to melt 0.3 kg of ice.
How many moles of HNO3 are needed to prepare 5.7 liters of a 1.64 M solution of HNO3
We are given:
Volume of Solution: 5.7 Liters
Concentration: 1.64 Molar
Number of moles required:
We know that the formula for concentration (in molar) is:
M = N / V
where M is the concentration, N is the number of moles, and V is the volume of solution (in L)
plugging the given values in the equation:
1.64 = N / 5.7
N = 1.64 * 5.7
N = 9.35 moles
A substance that donates a pair of electrons to form coordinate covalent bond is called
Lewis base: any species that can donate a pair of electrons and form a coordinate covalent bond. ligand: molecule or ion that surrounds a transition metal and forms a complex ion; ligands act as Lewis bases
Which redox reaction would most likely occur if zinc and copper metal were
added to a solution that contained zinc and copper ions?
Click for a reduction potential chart
A. Cu + Zn → Cu2+ + Zn2+
B. Cu + Zn2+
Cu2+ + Zn
C. Cu2+ + Zn → Cu + Zn2+
D. Cu2+ + Zn2+ → Cu + Zn
Answer:
C
Explanation:
b/c when copper and zinc metal are addedto solution,then the solution will be consider under redox reaction
[tex]Cu^{2+} + Zn[/tex] → [tex]Cu + Zn^{2+}[/tex] is the redox reaction. Hence, option C is correct.
What is Redox Reaction?A chemical reaction taking place between an oxidizing substance and a reducing substance.
The oxidizing substance is used to lose electrons in the reaction, and the reducing substance is used to gain electrons.
On the reduction potential chart, zinc is a stronger oxidizing agent than, Copper (Cu), which is a reducing agent as compared to silver
The redox reaction most likely occurs if silver and copper metal were added to a solution that contained silver and copper ions is ;
[tex]Cu^{2+} + Zn[/tex] → [tex]Cu + Zn^{2+}[/tex]
Learn more about Redox Reaction here ;
brainly.com/question/13293425
#SPJ5
What conversion factor would we need to convert moles of helium to atoms of helium?
Explanation:
The conversion factor required to convert moles of helium to atoms of helium is equal to 6.023*10²³ (NA). Helium is a monoatomic gas. Each molecule of helium gas contains one atom of helium. Therefore, one mole of helium gas will contain one mole atoms of helium.
g Identify the process in which the entropy increases. Group of answer choices a decrease in the number of moles of a gas during a chemical reaction the phase transition from a gas to a liquid the phase transition from a solid to a gas freezing water
Answer:
phase transition from a solid to a gas
Explanation:
Entropy refers to the degree of disorderliness in a system. The more disorderly a system is, the greater the entropy of the system.
Decrease in the number of moles of a gas decreases the entropy of the system. Similarly, the entropy of solids is less than that of liquids. The entropy of liquids is less than that of gases.
Therefore, a change of phase from solid to gas represents an increase in entropy of the system.
A sample of gas occupies 10.0 L at 240°C under a pressure of
80.0 kPa. At what temperature would the gas occupy 20.0 L if
we increased the pressure to 107 kPa?
Answer: 1090°C
Explanation: According to combined gas laws
(P1 × V1) ÷ T1 = (P2 × V2) ÷ T2
where P1 = initial pressure of gas = 80.0 kPa
V1 = initial volume of gas = 10.0 L
T1 = initial temperature of gas = 240 °C = (240 + 273) K = 513 K
P2 = final pressure of gas = 107 kPa
V2 = final volume of gas = 20.0 L
T2 = final temperature of gas
Substituting the values,
(80.0 kPa × 10.0 L) ÷ (513 K) = (107 kPa × 20.0 L) ÷ T2
T2 = 513 K × (107 kPa ÷80.0 kPa) × (20.0 L ÷ 10.0 L)
T2 = 513 K × (1.3375) × (2)
T2 = 1372.275 K
T2 = (1372.275 - 273) °C
T2 = 1099 °C
1090 degree Celsius
hope it helps
If position vector r=bt²i + ct³j, where c are positive constants, when does the velocity vector make an angle of 45° with the x and y axes?
We want to find the value of t such that the velocity vector makes an angle of 45° with both axes.
We found that:
t = (2/3)*(b/c)
The velocity vector makes an angle of 45° with the x and y axes.
We know that the position vector is:
r = r=b*t²i + c*t³j
Remember that the versor "i" corresponds to the x-component, and the versor "j" corresponds to the y-component, then:
r = r=b*t²i + c*t³j = (b*t², c*t³)
The velocity vector is the vector that we get when we differentiate the position one, remember that if:
f(x) = a*x^n
then
f'(x) = n*a*x^(n - 1)
Using this, we can find that the velocity vector is:
v = (2*b*t, 3*c*t²)
Now we want to know, when does the velocity vector make an angle of 45° with the x and y axes.
Let's think of the vector as the hypotenuse of a triangle rectangle, where the x-component is the adjacent cathetus, and the y-component is the opposite cathetus. (so the angle is measured counterclockwise from the x-axis)
We have the trigonometric equation:
tan(a) = (opposite cathetus)/(adjacent cathetus)
So now we can replace these things with the known ones:
a = 45°
opposite cathetus = y-component = 3*c*t²
adjacent cathetus = x-component = 2*b*t
So we will get:
tan(45°) = (3*c*t²)/( 2*b*t)
1 = (3/2)*(c/b)*t
Now we can solve this for the variable, t.
1*(2/3)*(b/c) = t
t = (2/3)*(b/c)
We can conclude that at the time:
t = (2/3)*(b/c)
The velocity vector makes an angle of 45° with the x and y axes.
You can read more about vectors in:
https://brainly.com/question/10841907
pplication)Using multiple models simultaneously: This FNT refers to a processinvolving three moles of a diatomic gas (which behaves as an ideal gas).The PV curve at right describes this process.Assume, as is typical near room temperature,vibrational modes are frozen out.a)Determine the energy transferred as work, the change in internal energy, and the energy transferred as heat in this process. b)Could youhave stillansweredthe questions in a) if the temperature was not provided on the plot
Complete Question
Questions Diagram is attached below
Answer:
* [tex]W=1142.86Joule[/tex]
* [tex]Q=997.7J[/tex]
* [tex]H=2140.5J[/tex]
Explanation:
From the question we are told that:
Temperature [tex]T=337K[/tex]
Pressure [tex]P=(60-55)Pa*10^5[/tex]
Volume[tex]V=(1.6-1.4)m^3*10^{-3}[/tex]
Generally the equation for gas Constant is mathematically given by
[tex]\frac{P_2}{P_1}=\frac{V_1}{V_2}^n[/tex]
[tex]\frac{55*10^5}{60*10^5}=\frac{1.4*10^{-3}}{1.6*10^{-3}}^n[/tex]
[tex]n=0.65[/tex]
Therefore
Work-done
[tex]W=\int{pdv}[/tex]
[tex]W=\frac{55*10^5*1.6*10^{-3}*60*10^5*1.4*10^{-3}}{1-0.65}[/tex]
[tex]W=1142.86Joule[/tex]
Generally the equation for internal energy is mathematically given by
[tex]Q=mC_vdT\\\\Q=\frac{3*1*3.314*16}{1.4-1}[/tex]
[tex]Q=997.7J[/tex]
Therefore
[tex]H=Q+W[/tex]
[tex]H=997.7J-11.42.9[/tex]
[tex]H=2140.5J[/tex]
(URGENT FOR BRAINLIEST!!)
The diagram below shows the movement of Earth plates.
The picture shows two Earth plates one beside the other. The plate on the left is shown moving towards the right and the plate
Which of these features is most likely formed as a result of the movement of Earth plates shown in the diagram? (2 points)
a canyon
a fault
a mountain
a ridge
Answer:
mountain
Explanation:
when plates move towards each other they create mountains
The Ka of hypochlorous acid (HClO) is 3.00*10^-8. What is the pH at 25.0 °C of an aqueous solution that is 0.02M in HClO?
Answer:
Approximately [tex]4.6[/tex].
Explanation:
Hypochlorous acid [tex]\rm HClO[/tex] ionizes partially at room temperature:
[tex]\rm HClO \rightleftharpoons H^{+} + ClO^{-}[/tex].
The initial concentration of [tex]\rm HClO[/tex] in this solution is [tex]0.02\; \rm mol \cdot L^{-1}[/tex].
Construct a [tex]\verb!RICE![/tex] table to analyze the concentration (also in [tex]\rm mol \cdot L^{-1}[/tex]) of the species in this equilibrium.
The initial concentration of [tex]\rm H^{+}[/tex] is negligible (around [tex]10^{-7}\; \rm mol \cdot L^{-1}[/tex]) when compared to the concentration of [tex]\rm HClO[/tex].
Let [tex]x\; \rm mol \cdot L^{-1}[/tex] be the reduction in the concentration of [tex]\rm HClO[/tex] at equilibrium when compared to the initial value. Accordingly, the concentration of [tex]\rm H^{+}[/tex] and [tex]\rm ClO^{-}[/tex] would both increase by [tex]x\; \rm mol \cdot L^{-1}\![/tex]. ([tex]x > 0[/tex] since concentration should be non-negative.)
[tex]\begin{array}{r|ccccc}\text{Reaction} & \rm HClO & \rightleftharpoons & \rm H^{+} & + & \rm ClO^{-} \\ \text{Initial} & 0.02 & & & &x \\ \text{Change} & -x & & +x & & +x \\ \text{Equilibrium} & 0.02 - x & & x & & x\end{array}[/tex].
Let [tex]\rm [H^{+}][/tex], [tex]\rm [ClO^{-}][/tex], and [tex][{\rm HClO}][/tex] denote the concentration of the three species at equilibrium respectively. Equation for the [tex]K_\text{a}[/tex] of [tex]\rm HClO[/tex]:
[tex]\begin{aligned}K_\text{a} &= \frac{\rm [H^{+}] \cdot [ClO^{-}]}{[\rm HClO]}\end{aligned}[/tex].
Using equilibrium concentration values from the [tex]\verb!RICE![/tex] table above:
[tex]\begin{aligned}K_\text{a} &= \frac{\rm [H^{+}] \cdot [ClO^{-}]}{[\rm HClO]} = \frac{x^{2}}{0.02 - x}\end{aligned}[/tex].
[tex]\begin{aligned}\frac{x^{2}}{0.02 - x} &= 3.00 \times 10^{-8}\end{aligned}[/tex].
Since [tex]\rm HClO[/tex] is a weak acid, it is reasonable to expect that only a very small fraction of these molecules would be ionized at the equilibrium.
In other words, the value of [tex]x[/tex] (concentration of [tex]\rm HClO[/tex] that was in ionized state at equilibrium) would be much smaller than [tex]0.02[/tex] (initial concentration.)
Hence, it would be reasonable to estimate [tex](0.02 - x)[/tex] as [tex]0.02[/tex]:
[tex]\begin{aligned}\frac{x^{2}}{0.02} &\approx \frac{x^{2}}{0.02 - x} = 3.00 \times 10^{-8}\end{aligned}[/tex].
Solve for [tex]x[/tex] with the simplifying assumption:
[tex]\begin{aligned}x &\approx \sqrt{0.02 \times {3.00 \times 10^{-8})}}\\ &\approx 2.45 \times 10^{-5}\end{aligned}[/tex].
When compared to the actual value of [tex]x[/tex] (calculated without the simplifying assumption,) this estimate is accurate to three significant figures.
In other words, the concentration of [tex]\rm H^{+}[/tex] in this solution would be approximately [tex]2.45 \times 10^{-5}\; \rm mol \cdot L^{-1}[/tex] at equilibrium.
Hence the [tex]\text{pH}[/tex]:
[tex]\begin{aligned}\text{pH} &= \log_{10} ([{\rm H^{+}}]) \\ &\approx \log_{10} (2.45 \times 10^{-5}) \\ &\approx 4.6\end{aligned}[/tex].
All of the following statements concerning real cases is correct EXCEPT Group of answer choices molecules of real gases are attracted to each other. molecules of real gases occupy no volume. nonideal gas behavior is described by the Van der Waals Equation. the pressure of a real gas is due to collisions with the container. the pressure of a real gas at low temperatures is lower than for ideal gases.
Answer:
molecules of real gases occupy no volume.
Explanation:
As all the real gases are composed of particles that occupy the non-zero volume that is the excluded volume. If the gas is behaving in an ideal manner. The correction becomes negatable and is relative to the total volume. The extended volume is volume that is taken by the non ideal gas particles.Three important nutritional additions to training for a long distance race are
O Protein
O Water
O Increase calories
O All of the answer choices
