Which one of the following can be classified as a weak electrolyte? A) HBr B) CaF2 C) OBrz D) HF E) Fz

A 145 mL flask contains argon at 1.3 atm and 65 ◦C. 6.12g is the amount of Ar is present. 0.34mol is the amount of Ar is present.

Argon is indeed a chemical element with the atomic number 18 and the symbol Ar. It is considered a noble gas and belongs to Periodic Group 18. [6] Argon, with 0.934%, is the third-most prevalent gas in the Earth's atmosphere (9340 ppm).

It is more than twice as plentiful than water vapor (which averages around 4000 ppm but fluctuates widely), 23 times as prevalent than carbon dioxide (400 ppm), as well as 500 times more abundant than neon (18 ppm).

P×V = n×R×T

1.3 ×145 = n×8.314× 65

n = 188.5 / 540.4 =0.34mol

mass = 0.34 ×18=6.12g

Therefore, 6.12g is the amount of Ar is present.

To know more about argon, here:

https://brainly.com/question/14447731

#SPJ9

We require the number of moles of solute and the volume of the solution in liters to determine the molarity of a solution. Initially, we must calculate the amount of moles of NaCl in 5.85 g. NaCl .

has a molar mass of 58.44 g/mol: NaCl moles = mass of NaCl / molar mass of NaCl moles = 5.85 g / 58.44 g/mol NaCl moles = 0.1 mol The volume of the solution must then be converted from milliliters to liters: 500 mL / 1000 mL/L solution volume 0.5 L solution volume We can compute the molarity of the solution now that we know the number of moles of NaCl and the volume of the solution in liters: molarity = solute moles / volume of solutio molarity = 0.1 mol / 0.5 L molarity = 0.2 mol/L Therefore, the molarity of the solution is 0.2 mol/L, which corresponds to option C.

learn more about  NaCl  here:

https://brainly.com/question/1550455

#SPJ4

The pyridinium cation in pyridinium chlorochromate (PCC) allows it to dissolve in organic solvents so it can be used in reactions in the absence of water.

Pyridinium chlorochromate (PCC) is a red-orange glasslike strong that is dissolvable in different organic solvents, like dichloromethane (CH2Cl2), chloroform (CHCl3), and CH3)2CO. The piece of PCC that permits it to break down in these organic solvents is the pyridinium cation (C5H5NH+).

The pyridinium cation is a positively charged particle that is shaped by the protonation of pyridine, a six-membered fragrant heterocyclic compound. The positive charge on the pyridinium cation makes it drawn to the negative charge on the chloride particle (Cl-), which is likewise present in PCC. The association between the decidedly charged pyridinium cation and the adversely charged chloride particle frames an ionic bond, which permits PCC to break up in natural solvents.

The dissolvability of PCC in organic solvents makes it helpful in numerous organic reactions where the presence of water should stay away. For example, PCC can be used as a mild oxidizing agent in the absence of water to convert primary alcohols to aldehydes and secondary alcohols to ketones.

Learn more about Organic solvents:

https://brainly.com/question/30623290

#SPJ4

A possible hypothesis on the observable products indicating that the reaction has gone to completion could be:

A double-replacement reaction is a type of chemical reaction that occurs between two ionic compounds in which the cations and anions of the two compounds switch partners to form two new ionic compounds.

In other words, the cations of one compound exchange places with the anions of the other compound. The general form of a double-replacement reaction can be written as AB + CD -> AD + CB, where A and B are the cations of the two original compounds and C and D are the anions of the two original compounds.

Learn more on double-replacement reaction here: https://brainly.com/question/23918356

#SPJ1

Introducing 0.25 mol of br2 and 0.25 mol of cl2 into a 3.0 l container at 400 k results in the 0.096 M of equilibrium concentration of BrCl

The reaction for the formation of BrCl from Br2 and Cl2 is:

Br2(g) + Cl2(g) ⇌ 2BrCl(g)

The equilibrium constant expression for the above reaction is:

Kc = ([[tex]BrCl^{2}[/tex]]) / ([Br2][Cl2])

where [BrCl], [Br2], and [Cl2] are the equilibrium concentrations of the respective species in the reaction.

Since we have 0.25 mol of both Br2 and Cl2 in a 3.0 L container, the initial concentration of each is:

[Br2] = 0.25 mol / 3.0 L = 0.083 M

[Cl2] = 0.25 mol / 3.0 L = 0.083 M

At equilibrium, let's assume that the concentration of BrCl is x M. Therefore, the equilibrium concentration of Br2 and Cl2 will be (0.083 - x) M, since each mole of Br2 and Cl2 produces 2 moles of BrCl.

Kc = ([[tex]BrCl^{2}[/tex]]) / ([Br2][Cl2])

At equilibrium, Kc will have a certain value at the given temperature. For this problem, let's assume Kc =2.0 x [tex]10^{-2}[/tex] (which is an estimated value based on literature values at 400 K). Solving for x, we get:

2.0 x [tex]10^{-2}[/tex] = [tex]x^{2}[/tex] / [[tex](0.083 - x)^{2}[/tex]]

x = 0.096 M

Therefore, the equilibrium concentration of BrCl is 0.096 M.

Learn more about equilibrium concentration here:

https://brainly.com/question/15557078

#SPJ4

One of the key features of enzymes is that they are not consumed in chemical reactions and can be used again.

Enzymes are biological catalysts that accelerate chemical reactions by lowering the activation energy required for the reaction to occur. They are typically large, complex proteins that have a specific three-dimensional structure that allows them to interact with specific substrates, or reactants, in a particular chemical reaction.

Enzymes remain unchanged after a reaction, and can be used to catalyze the same reaction many times over. However, enzymes can be affected by changes in pH, temperature, or other environmental factors, which can alter their structure and affect their ability to catalyze reactions.

Enzymes are critical to many biological processes, including metabolism, digestion, and DNA replication. Without enzymes, many of these processes would occur too slowly to sustain life. Scientists have also developed ways to use enzymes in industrial processes, such as the production of biofuels and pharmaceuticals. The ability to use enzymes repeatedly in these applications makes them a valuable tool in the development of sustainable and efficient technologies.

To learn more about enzymes Click here:

brainly.com/question/14953274

#SPJ4

Silver has a 0.235 J/g°C specific heat.

The amount of energy needed to raise the temperature of a given mass of a substance by a certain quantity is measured by the substance's specific heat. In this issue, we are required to determine a piece of silver's specific heat given its mass and heat capacity.

According to the equation

specific heat = heat capacity/mass

specific heat = 85.7 J/°C / 362 g

Thus, 0.235 joules of energy are required to raise the temperature of 1 gm of silver by 1 degree Celsius. The thermal characteristics and behavior of a substance are significantly influenced by its specific heat.

Complete question:

A piece of silver of mass 362 g has a heat capacity of 85.7 J/°C. What is the specific heat of silver?

Read more about Specific heat:

https://brainly.com/question/27991746

#SPJ4

In reference to the given data concerning the separation of the mixture, the percent by mass of salt in the mixture is 73.9%.

To find the percent by mass of salt in the mixture, we need to divide the mass of salt by the total mass of the mixture and multiply by 100.

First, we need to calculate the mass of sand in the mixture:

Mass of sand = Total mass of mixture - Mass of salt

Mass of sand = 2.18 g - 1.61 g = 0.57 g

Now we can calculate the percent by mass of salt in the mixture:

Percent by mass of salt = (Mass of salt / Total mass of mixture) x 100%

Percent by mass of salt = (1.61 g / 2.18 g) x 100%

The percent by mass of salt = 73.9%

Therefore, the percent by mass of salt in the mixture is 73.9%.

To know more about  percent by mass, visit:https://brainly.com/question/14990953

#SPJ4

The lowest temperature at which magnesium chloride is anticipated to be able to melt ice is -46.5°C.

Molality is defined as the concentration of solute particles per kilogram of solvent expressed in moles.

To calculate the freezing point depression:

[tex]\rm \Delta T_f = i\times K_f\times molality[/tex]

where, ΔTf is the change in freezing point.

[tex]\rm K_f[/tex] is the freezing point depression constant.

molality = (mass/molar mass)[tex]\times[/tex] (1000/mass of solvent in gm)

molar mass of [tex]\rm MgCl_2[/tex] = 95.2 g/mol

i = Van't Hoff factor, for [tex]\rm MgCl_2[/tex] Van't Hoff factor is 3.

Now, plugging the values, we get:

[tex]\rm \Delta T_f[/tex] = 3 [tex]\times[/tex] 1.86 [tex]\times[/tex] (54.3/95.21) [tex]\times[/tex] (1000/100)

[tex]\rm \Delta T_f[/tex] = 31.82 °C

To get the lowest temperature at which magnesium chloride can melt ice, subtract it from the freezing point of water (0°C):

[tex]\rm \Delta T_f[/tex] = [tex]\rm T_0-T_1[/tex] ([tex]\rm T_0[/tex]= freezing point of solvent, [tex]\rm T_1[/tex]= freezing point of solution)

31.82 = 0.0 - [tex]\rm T_1[/tex]

[tex]\rm T_1[/tex]= -31.82 °C

Therefore, lowest temperature to melt the ice is -31.82 °C.

Learn more about Molality here:

https://brainly.com/question/30640726

#SPJ12

To prevent the time temperature  when transporting the food, the practice should be followed is the correct option is D. Transport potentially  haza-r-dous ( TCS) hot food in an ins-ul-ated food container at the 135  or the higher.

The average body of the temperature is 98.6  that is 37 °C. The average body temperature, is will be as the high as 99  that is 37.2 °C or will be low as the 97  that is 36.1 °C. The temperature may be varies that is based on the time of the day .

Thus, Transport cold potentially haza-r-dous (TCS) that  is hot food in the ins-ul-ated food container at the 135  or the higher.

To learn more about temperature here

https://brainly.com/question/4689354

#SPJ4

The density of pure iron is 7.874 g/cm³. The mass in grams of a piece of iron with a volume of 20.00 cm³ is 157.48 g.

The density of the pure iron = 7.874 g/cm³

The volume of the iron = 20.00 cm³

The expression for density is as :

Density = mass / volume

Mass = density × volume

Where

Density = 7.874 g/cm³

Volume = 20.00 cm³

Mass = 7.874 g/cm³ × 20.00 cm³

Mass = 157.48 g

Thus, the mass of the piece of the iron is 157.48 with the volume of the iron is 20.00 cm³ .

To learn more about density here

https://brainly.com/question/30635626

#SPJ4

There are fewer water molecules withinside the vapor (i.e., decrease vapor stress) above the NaCl solution than withinside the vapor above natural water.

The boiling factor of the NaCl answer can be extra than the boiling factor of natural water. The boom withinside the boiling factor of a 1.00 m aqueous NaCl answer can be about two times as massive as that of the glucose or sucrose answer due to the fact 1 mol of NaCl produces 2 mol of dissolved ions. Hence a 1.00 m NaCl answer could have a boiling factor of approximately 101.02°C.The addition of any non-unstable solute (including salt, baking soda or sugar) to a liquid will reason a lower in that drinks vapor stress. A liquid will begin to boil while its vapor stress is identical to the atmospheric stress, so a decrease vapor stress method you want a better temperature to boil the water.

To learn more about boiling factor check the link below:

https://brainly.com/question/30321740

#SPJ4

The following orbital notation is for the element O (Oxygen).

Orbital notation is a way to describe the electron configuration of an atom. It consists of a combination of symbols and numbers that represent the energy level, type of orbital, and the number of electrons contained in that orbital.

The notation uses the letter symbols "s," "p," "d," and "f" to represent the different types of orbitals, and a superscript to indicate the number of electrons in the orbital. For example, the orbital notation for a carbon atom is "1s2 2s2 2p2," indicating that there are two electrons in the 1s orbital, two electrons in the 2s orbital, and two electrons in the 2p orbital.

learn more about orbital notation: https://brainly.com/question/26000020

#SPJ1

Yes, an element in the activity series can replace only an element placed below it.

When we look at the activity series, we can observe that nickel is positioned above lead but below iron. As a result, while iron cannot be replaced by nickel metal, lead can be replaced by it in a reaction. Thus, an element can replace another element placed below it in the activity series.

Only when the element being replaced is more reactive than the other element, single-replacement reactions take place. Consequently, having a list of the elements arranged according to their relative reactivity is helpful. The elements in the activity series are listed in decreasing order of how reactive they are.

Metals and nonmetals each have their own activity series because metals replace other metals while nonmetals replace other nonmetals.

To know more about activity series, refer:

https://brainly.com/question/19482695

#SPJ4

Answer:

At lower altitudes, the air molecules are closer together and have more energy due to their increased interactions with each other. At higher altitudes, the air molecules are more spread out and have less energy due to their decreased interactions with each other. This can be represented by sketching molecular models of air at different altitudes.

At lower altitudes, the molecules are represented by a dense, tightly packed arrangement. At higher altitudes, the molecules are represented by a more spread out, less dense arrangement. This difference in density and energy can be seen in the models, and it explains why there is less energy in the samples at higher altitudes.

Answer: 32 atomic mass units

Explanation:

carbon is 14

hydrogen is 1 each

oxygen is 16

There is a direct relationship between temperature, speed, and kinetic energy of gas molecules is as the temperature increases, so does the average speed and kinetic energy of the gas molecules.

The temperature, speed, and kinetic energy of gas molecules are related to each other through the gas laws and the concept of ideal gases. According to the ideal gas law, the pressure, volume, and temperature of a gas are proportional to each other, and are directly proportional to the average kinetic energy of the gas molecules. This means that as the temperature of a gas increases, the average kinetic energy of its molecules also increases.

The relationship between temperature, speed, and kinetic energy can also be understood through the concept of random motion. Gas molecules are in constant random motion, bouncing off of each other and the walls of their container. The average kinetic energy of these molecules is directly proportional to the temperature of the gas. As the temperature of the gas increases, the average speed of its molecules also increases, and thus, so does their kinetic energy.

In mathematical terms, the average kinetic energy of a gas molecule can be represented as:

KE = (3/2)kT

where KE is the average kinetic energy, k is the Boltzmann constant, and T is the temperature in Kelvin.

To learn more about Gas molecules :

https://brainly.com/question/3622475

#SPJ4

The correct order for atomic radius is:

d. Si > P > Ar > Na > Mg

The size of an atom increases as you go down a column in the periodic table, because each electron is added to a higher energy level farther away from the nucleus. The size of an atom decreases as you go across a row in the periodic table, because the effective nuclear charge increases, pulling the electrons closer to the nucleus.

Answer:

It's option D

Explanation:

According to Beer-Lambert law, the absorbance of dye such as crystal violet is proportional to its molar concentration.

Beer-Lambert law says that, "there is a linear relationship between the absorbance of the solution and the concentration, which enables the concentration of a solution to be calculated by measuring its absorbance.

Beer Lambert law is basically used in chemistry to measure the concentration of chemical solutions, analyze oxidation, and measure polymer degradation. This law also explains the attenuation of radiation through the Earth's atmosphere.

The Beer-Lambert law is mathematically expressed as:

A = εLc

where,

A is the denotation for absorbance, ε is the molar extinction coefficient, l is the length of the path light which must travel in the solution in centimeters, and c is the concentration of a given solution.

Learn more about Beer-Lambert law from the link given below.

https://brainly.com/question/29434481

#SPJ4

The p-alkalinity of the CaCO3 sample in ppm is 12.57.

In order to solve this problem, we need to use the balanced chemical equation for the reaction between the HCl and the alkalinity in the sample:

OH- + HCl -> H2O + Cl-

From the equation, we can see that each mole of HCl reacts with one mole of OH-. Therefore, the number of moles of OH- in the sample is equal to the number of moles of HCl that were added during the titration.

We can use this information to calculate the p-alkalinity of the sample as follows:

Calculate the number of moles of HCl that were added during the titration:

moles HCl = concentration of HCl x volume of HCl

= 0.0148 mol/L x 0.01810 L

= 0.00026788 mol

Since the reaction is 1:1 between OH- and HCl, the number of moles of OH- in the sample is equal to the number of moles of HCl that were added during the titration:

moles OH- = 0.00026788 mol

Convert the number of moles of OH- to ppm of CaCO3:

ppm CaCO3 = (moles OH-) x (1000000 ppm / 1 mol OH-) x (100 g CaCO3 / 2 mol OH-) x (1 L / 50.00 mL)

ppm CaCO3 = 267.88 ppm

Calculate the p-alkalinity:

p-alkalinity = 14 - log(ppm CaCO3)

= 14 - log(267.88)

= 12.57

Read more about Alkalinity:

https://brainly.com/question/15018809

#SPJ4

A process whereby a compound is broken down into two or more simpler compounds. Reaction of displacement.

Decomposition reactions: the breaking down of a chemical molecule into less complex elements. These reactions work in opposition to synthesis reactions. Breaking down a highly complex chemical into two or more simpler substances is known as a decomposition reaction. The formula for this reaction is frequently written as AB A + B or C A + B. Everywhere, decomposition reactions take place. Reactions involving decomposition - A reaction in which a single component disintegrates, or decomposes, into two or more simpler substances. One illustration is the electrolysis of water, which occurs when an electric current is carried across it and produces hydrogen and oxygen gas.

Learn more about reaction of displacement here:

https://brainly.com/question/29307794

#SPJ4

If we use 1.6 ml of pure ethyl acetate instead of a mixture of 0.8 ml of ethyl acetate and 0.8 ml of hexane as the reaction solvent, means that the reaction would take place in a more polar solvent than otherwise.

Ethyl acetate is a more polar solvent than hexane. Since the experiment calls for a Craig tube, we know that crystallization is an important component of the experiment.

This process is highly sensitive to the polarity difference between the solute (reaction product) and solvent. Therefore, we would expect more difficulty completing the experiment's crystallisation step when pure ethyl acetate is used as the solvent.

To learn more about polar solvent,

brainly.com/question/3184550

#SP J4

When there is competition between the inductive effect and resonance effect, the resonance effect is generally more dominant in determining the electronic properties of a molecule.

This is because resonance allows for the delocalization of electrons, resulting in more stable molecules and enhanced reactivity.

The resonance effect is a chemical phenomenon in which electrons are delocalized through a system of adjacent atoms with conjugated pi bonds. This delocalization leads to the stabilization of the molecule, which can affect its reactivity and electronic properties. The resonance effect is typically observed in organic molecules with alternating double and single bonds, or in molecules with adjacent atoms with lone pairs. The delocalization of electrons through resonance can lead to a variety of interesting effects, including increased acidity or basicity, altered reactivity patterns, and changes in molecular orbital energies. The resonance effect is an important concept in many areas of chemistry, including organic synthesis, biochemistry, and materials science, and is often used to explain and predict the behavior of complex molecules.

Learn more about resonance effect here:

https://brainly.com/question/30490931

#SPJ4

Litmus is a type of dye that is extracted from lichens and is commonly used as a pH indicator. The color change from purple to pink indicates a change in the acidity or basicity of a solution.

In an acidic solution, the hydrogen ion (H+) concentration is high, which causes the litmus dye to change from its original blue color to red. In a neutral or basic solution, the hydrogen ion concentration is low, and the litmus dye remains blue. However, if the solution is sufficiently basic, the litmus dye will change from blue to pink. The exact mechanism of this color change is due to the chemical structure of the litmus dye, which contains a variety of functional groups that can interact with hydroxide ions (OH-) in a basic solution. This interaction causes a change in the electronic structure of the dye molecules, which results in a change in their absorption and transmission of light and, therefore, a change in color.

Learn more about litmus here:

https://brainly.com/question/14388413

#SPJ4

The process of separating Na+ and Cl- against coulomb attractive force is :

Endothermic.

This is because it takes energy to counteract the attraction between the oppositely charged ions while separating Na+ and Cl- ions against Coulomb attractive force. The amount of energy needed to separate the ions is dictated by the intensity of their attraction, which is determined by the size of their charges and the distance between them. The greater the charge and the closer the ions, the greater the amount of energy necessary to separate them.

An endothermic process is one that absorbs energy in the form of heat. This sort of reaction requires an energy input, generally in the form of heat, to proceed. Endothermic processes include the combustion of fuels, the dissolution of salts, and the neutralisation of acids and bases.

For more such questions on  endothermic process, click on:

https://brainly.com/question/10361961

#SPJ4

Oxygen and carbon, as well as other elements, have different specific heat capacities. Specific heat capacity, also known as specific heat, is the amount of energy required to increase the temperature of a substance by a certain amount.

The specific heat of a substance depends on its physical and chemical properties, such as its atomic structure, mass, and intermolecular forces. Different elements have different properties, which lead to differences in their specific heats.

For example, water has a high specific heat capacity compared to many other substances, which is why it is often used to regulate temperature in industrial processes and in nature. This means that it takes a relatively large amount of energy to increase the temperature of water by a given amount. In contrast, metals like copper have low specific heat capacities, which means that it takes much less energy to increase their temperature by the same amount.

In terms of the human body, the specific heat capacity of different tissues and organs is important for regulating body temperature. For example, the brain and the liver have high specific heat capacities, which helps to protect them from rapid temperature changes. In contrast, bone has a lower specific heat capacity, which makes it more susceptible to temperature changes.

Overall, the specific heat capacity of different elements and substances is an important physical property that has a significant impact on the behavior of matter. It is a fundamental property of materials that is essential for understanding and predicting the behavior of systems in the physical and natural sciences, including the human body.

To know more about specific heat: https://brainly.com/question/11297584

#SPJ4

Silver chloride, often used in silver plating, contains 75.27% Ag. 450mg is the  mass of silver chloride in grams required to make 4.4 g of silver plating.

Silver is stable in clean air and clean water, but tarnishes whenever subjected to ozone, hydrogen sulfide, especially sulfurous air. Silver is largely utilized in electroplating for industrial purposes, notably electrical connections.

1 mole of AgCl, 0.7527 mol of Ag present.

1 mol of Ag is obtained from 1/0.75mol of AgCl

number of moles =  4.4 g / 107.87=0.002mol

0.002364 mol of Ag will be obtained from 0.002mol/ 0.7527 =0.003 mol

mass = moles × molar mass

        = 0.03 × 143.3=0.450g=450mg

Therefore, 450mg is the  mass of silver chloride in grams required to make 4.4 g of silver plating.

To learn more about silver plating, here:

https://brainly.com/question/14943624

#SPJ9

Since many organic solvents are volatile, vapors will accumulate during mixing and raise the container's internal pressure. In order to release this pressure, it is necessary to frequently vent the mixing container.

As gas particles collide with the wall of their container, a force known as "gas pressure" is generated. Force is used to apply pressure to a region. Gas pressure is the force a gas applies to a certain location. As a result, the gas pressure of a gas is calculated by dividing the total surface area of the container walls by the sum of the forces the gas molecules exert on the walls of their container.

Learn more about organic solvents here:

https://brainly.com/question/28850026

#SPJ4