which orbital has the lowest energy

Answer:

D

Explanation:

The correct answer would be that the thermal energy of the sun is transferred to the pavement.

Thermal energy refers to the internal energy possessed by a system by virtue of the movement of molecules within such a system. In other words, it is the heat energy possessed by a system.

When the thermal energy from the sun warms the pavement, it means that the thermal energy from the sun has been successfully transferred to the pavement. Thermal energy can be transferred by conduction, convection, or by radiation depending on whether the system is a solid, liquid, gas respectively.

The correct option is, therefore, D.

Answer:

C.

Explanation:

Answer A is incorrect because a compound doesn't have to be made with only metals.

Answer B is incorrect because that is actually the definition of a pure element.

Answer C is correct because to make a compound, there has to be a chemical reaction where bonds are formed and an entirely new substance is created.

Answer D is incorrect because compounds cannot be separated by physical means.

Hope this helps :D

Explanation:

"Its bonds are formed by large differences in electronegativity" is the statement among the choices given in the question that is generally true about CaCl2.

Answer:

0.289J of heat are added

Explanation:

We can relate the change in heat of a substance with its increasing in temperature using the equation:

q = m*ΔT*S

Where Q is change in heat

m is mass of substance (In this case, 0.0948g of water)

ΔT = 0.728°C

S is specific heat (For water, 4.184J/g°C)

Replacing:

q = 0.0948g*0.728°C*4.184J/g°C

q = 0.289J of heat are added

Explanation:

Ca(OH) is a base

pOH = -Log[OH]

[OH] = 0.05

pOH = -Log(0.05)

pOH = 1.3

pH + pOH = 14

pH = 14 - pOH

pH = 14 - 2

pH = 12.7

Answer:

Letter b so F

Explanation:

I hope this help

Explanation:

All five ions have an equal number of electrons and therefore share the same electron configuration. For example, a neutral calcium atom (Z=20) has 20 electrons; it loses two of them to form a Ca2+ cation, which would thus contain 20−2=18 electrons. Similarly, a phosphorus atom (Z=15) gains three electrons to form a P3− anion that contains 15+3=18 electrons.

Positively-charged protons in the nuclei attract the negatively-charged electron cloud. Each proton carries a +1 charge; the more protons an atom or ion contains the stronger the attraction it poses on its electron cloud. A nucleus of strong positive charge pulls its electron cloud towards itself tightly such that the latter would have a small radius.

The periodic table is arranged in the order of increasing proton number. Phosphorus comes the first among the five species and contains the least number of protons. Its ion would be the largest among the five. Calcium comes the last and forms the smallest ion.

Number of protons per nucleus P<S<Cl<K<CaStrength of Electrostatic attraction on the electron cloud P<S<Cl<K<CaIonic radius P3−>S2−>Cl−>K+>Ca2+

Answer:

the name of reaction that produces esters is dehydration.

Answer:

An indication of calories consumed during anaerobic energy production

Explanation:

RER stands for respiratory exchange ratio, which is the ratio of the volume of carbon dioxide, CO₂, produced to the volume of oxygen, O₂ used in metabolism. RER is used in determining the respiratory quotient during aerobic exercise and rest, from which it can be determined if carbohydrate or fat is the source of fuel consumed in the production of energy for the body through metabolism

Therefore, the answer that is not correct is an indication of calories consumed during anaerobic energy production

Answer:

a

Explanation:

I think a is the answer because when you produce something you transform it's raw materials to a finished good.

I hope this helps

Answer:

- 10.6° C

Explanation:

Given that,

In the aqueous sucrose solution,

Molality of the solution (m) = 5.7

Freezing point constant (K) = 1.86

To find,

The freezing point of the solution = ?

Method:

To find its freezing point, we will first find out if the solute demonstrates an electrolyte or not.

In case it is not, the van't Hoff factor i.e. ration of particles' concentration denoted by (i) would be taken as 1. So,

ΔT(change in temperature) = i * m * K              (putting the given values)

= 1 * 5.7 * 1.86

= 10.6° C

Thus, the freezing point equals to 0 - 10.6° C = -10.6° C.

Answer:

D. the solvent particles to be spread further out and have more to move, increasing their kinetic energy.

Explanation:

Answer:

5.17 percentage is water

Explanation:

answer from gauth math

Answer:

The FitnessGram™ Pacer Test is a multistage aerobic capacity test that progressively gets more difficult as it continues. The 20 meter pacer test will begin in 30 seconds. Line up at the start. The running speed starts slowly, but gets faster each minute after you hear this signal. [beep] A single lap should be completed each time you hear this sound. [ding] Remember to run in a straight line, and run as long as possible. The second time you fail to complete a lap before the sound, your test is over.

fd

Answer:

I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4

I hope this helps

Answer:

The cathode is the electrode where reduction takes place.

so

reduction occur in Cathode in an electrochemical cell.

Answer: Cathode

Explanation:

.

The mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water is 29.7%.

Mass percent is a means to describe a component in a specific combination or to convey a concentration. The mass percentage used to describe the solution composition indicates the mass of solute contained in a given mass of solution.

To determine the mass percent of an element in a compound, we divide the mass of the element in one mole of the compound by the compound's molar mass and multiply the result by 100.

Given:

Number of moles = 0.64 moles

Moles of sodium fluoride = Given mass/molar mass

0.64 moles = Mass / 42

Mass = 26.88gram

Mass % = Mass of solute/ mass of solution × 100

= 26.88/90.48 × 100

= 29.7 %

Thus, 29.7 % is the mass percent of a sodium fluoride solution prepared by dissolving 0.64 moles of sodium fluoride into 63.5 grams of water

To learn more about the mass percent, follow the link;

https://brainly.com/question/5394922

#SPJ6

mercury is not a mixture it is a element

Answer:

mercury

Explanation:

Answer:

La comida es un sólido y no podemos vivir sin comida. Algunos sólidos son buenos conductores de calor y electricidad; otros son aislantes. Los sólidos se utilizan todos los días en la vida.

answer is wildlife sanctuary

Answer:

a wildlife sanctuary

Explanation:

Answer:

because the load arm is greater than the effort arm. As we know that when the load arm is greater than the effort arm, the mechanical advantage will always be lesser than one, which results in gain in speed

Answer:

ném NaOH vào thì th AlCl3 tan hết còn lại kết tủa Fe(OH)3 lần.

Lọc kết tủa riêng phần dung dịch tan riêng

Rồi Cho HCl vô lại là xong

Explanation:

kakamc cjdismxsjxj xjcodmd xksowmd x

The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm

The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).

Let's convert grams to moles (via molar mass).

Molar Mass (H₂) :  2 (1.008 g/mol)

Molar Mass (H₂) :  2.016 g/mol

1.8 grams H₂               1 mole

----------------------  x  ----------------------  =  0.893 moles H₂

                                2.016 grams

The Ideal Gas Law equation looks like this:

PV = nRT

In this equation,

After converting Celsius to Kelvin, you can put the given values into the equation and simplify to find the pressure.

P = ? atm                                R = 0.0821 L*atm/mol*K

V = 4.3 L                               T = 27 °C + 273.15 = 300.15 K

n = 0.893 moles

PV = nRT

P (4.3 L) = (0.893 moles) (0.0821 L*atm/mol*K)( 300.15 K)

P (4.3 L) =  22.0021

P = 5.12 atm

Therefore, The pressure in atm exerted by 1.8 g of H₂ gas exert in a 4.3 L balloon at 27ºC is 5.12 atm

Learn more about Ideal gas here ;

https://brainly.com/question/8711877

#SPJ2

Answer:

Explanation:

The most prominent function of mitochondria is to produce the energy currency of the cell, ATP (i.e., phosphorylation of ADP), through respiration and using sugar as fuel, and to regulate cellular metabolism .

Answer:

Answer is: elements in the same group have similar chemical properties. Periodic law is the arrangement of the elements in order of increasing atomic number.

Explanation:

The ionosphere is a shell of electron and electrically charged atoms and molecular that surrounds, the earth.

Answer:

60.55%

Explanation:

nO3=155/48

nO2 used: 3/2nO3=4.84375

percent yield: 4.84375/8=60.55%

Answer:

A

Explanation:

Two parents are involved in Sexual Reproduction but only one is involved in Asexual Reproduction.

Answer:

solubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased

Explanation:

solubility of salt at 10 degree Celsius is 20 how does it what does it means what happens if the temperature of saturated solution is increased

Explanation:

The given molecule is

H3C - C ≡ C - CH3

The numbering order is shown below:

H3C - C ≡ C - CH3

    1     2     3     4

So, the alkyne group is in the second position.

The carbon chain has four carbons.

Hence, the IUPAC name of the given compound is:

2-butyne.