Answer / Explanation:
acceleration is essentially increasing in velocity. [acceleration is literally velocity over time]
So, we can see acceleration on this velocity/time graph (the y-axis is representative of velocity).
Meaning that...
When we increase in velocity, that is acceleration. [A]
When we stay at the same velocity, that is zero acceleration. [B]
> (we are not increasing {acceleration} or decreasing {deceleration} in velocity/ acceleration over time)
When we decrease in velocity, that is deceleration. [C]
When we have no velocity (velocity = 0), that is zero velocity. [D]
So, this curve is already in order of A-B-C-D.
(origin/0 to A = acceleration)
(A to B = zero acceleration)
(B to C = deceleration)
(C to S = zero velocity)
hope this helps!!
Answer:
O - A : acceleration
A - B : zero acceleration
B - C : deceleration
C - S : zero velocity
Explanation:
acceleration is velocity over time, meaning that the slope of the graph is showing acceleration
A 60.0-kg child takes a ride on a Ferris wheel that rotates four times each minute and has a diameter of 20.0 m. (a) What is the centripetal acceleration of the child
Answer:
3 because
Explanation:
60÷20=3 ans is this
A periodic wave travels from one medium to another. which pair of variables are likely to change in the process?
velocity and wavelength are likely to change in the process
When a wave travels from one medium to another it undergoes a change in direction and this is referred to as refraction.Refraction is the bending of a wave or a change in direction of a wave as it travels from one medium to another. Refraction is accompanied by change in velocity and wavelength of a wavehttps://brainly.com/question/12571787
#SPJ4
A car traveling along the highway needs a certain amount of force exerted on it to stop it in a certain distance. More stopping force is required when the car has:.
More stopping force is required when the car has to stop in a shorter distance.
What is the relationship between force and acceleration?Force is directly proportional to acceleration according to Newton's second law of motion.
This means that acceleration increases when force increases.
Stopping of a moving car is negative acceleration.
Therefore, more stopping force is required when the car has to stop in a shorter distance.
Learn more about force and acceleration at: https://brainly.com/question/14343220
#SPJ1
two resistors 6 ohm and 3 ohm are connected in parallel and its connected with a cell of EMF 6 volt find the current through each resistors
Answer:
See below
Explanation:
Each resistor has 6 v applied across it
rememeber
V = IR then V/R = I
for the 6 Ω 6 v /6Ω = 1 amp
for the 3 Ω 6v /3Ω = 2 amp
Which statement correctly describes mass-energy equivalence? All energy in the universe will be converted to an equivalent amount of mass. Mass can decrease in nuclear changes without the production of energy. All energy in the universe is a result of mass being converted into energy. A large amount of mass is equivalent to a small amount of energy.
The statement 'all energy in the universe is a result of mass being converted into energy' correctly describes mass-energy equivalence.
What is mass-energy equivalence?The expression mass-energy equivalence refers to the proportion of matter that can be converted into energy in the universe.
This mass-energy equivalence is an outcome of process of converting mass into energy.
In conclusion, the statement 'all energy in the universe is a result of mass being converted into energy' correctly describes mass-energy equivalence.
Learn more about mass-energy equivalence here:
https://brainly.com/question/3171044
#SPJ1
Answer:
C
Explanation:
Find the mass of a sample of water if its temperature dropped 24.8 °C when it lost 870 J of
heat. (Remember that specific heat capacity of water 4200 J/kg °C)
Answer:
8.35 × [tex]10^{-3}[/tex] kg
Explanation:
Remember the formula for heat:
[tex]Q=mc\Delta T[/tex]
You just need to solve for m, doing so you're left with:
[tex]m=\dfrac{Q}{c\Delta T}[/tex]
Replace the variables with numbers and that's it.
You have found that the net force exerted on the cylinder depends on several different independent variables in different ways. how can you combine those separate dependencies into one equation relating the net force to the relevant independent variables
The net force on the cylinder depends on several independent variables such as mass, acceleration, velocity, time, etc, and it is given as F(net) = ma.
Net force exerted on the cylinder
The net force on the cylinder is calculated from Newton's second law of motion.
F(net) = ma
F(net) = m(v/t)
where;
m is mass of the cylindera is acceleration of the cylinderv is velocity of the cylindert is time of motion of the cylinderThus, the net force on the cylinder depends on several independent variables such as mass, acceleration, velocity, time, etc, and it is given as F(net) = ma.
Learn more about net force here: https://brainly.com/question/11556949
#SPJ1
8. Which of the following represents a chemical change?
A. Decaying food
B. Cutting bread
C. Shaping cookie dough
D. Mixing oil and water
What is the force needed to accelerate a wagon with a mass of 10 kg at a rate
of 2.0 m/s²?
A. 8.0 N
B. 20 N
OC. 12 N
OD. 5.0 N
Answer:
B
Explanation:
Remember:
F = m * a
= 10 * 2 = 20 N
What did johannes kepler contribute to the study of planets? he formulated the universal law of gravitation. he identified the first moons of jupiter. he collected detailed data that led to the proposal of the heliocentric model. he provided mathematical support for the heliocentric model.
Johannes Kepler contributed to the study of planets : He provided mathematical support for the heliocentric model.
What is Kepler's first law of planetary motion?Kepler's first law of planetary motion states that the planets revolve around the Sun in orbits elliptical in shape with the Sun at its one of the focus.
As the planets rotate around the Sun, the relative distance between the Sun and planets increases and decreases.
The heliocentric model in which the Earth and planets revolve around the Sun at the center of the universe. Johannes gave the mathematical calculations of this model.
Thus, last option is correct.
Learn more about Kepler's first law of planetary motion.
https://brainly.com/question/4978861
#SPJ1
Answer:
D
Explanation:
Equation for solving wavelength
Answer:
The equation for wavelength is λ = v/f
Explanation:
λ is wavelength
v = velocity
f = frequency
Why is it important to have a closed circuit?
A. It prevents a circuit from working.
B. It prevents components from overheating.
C. It increases the resistance in the circuit.
D. It allows an electric current in the circuit.
D. It allows the flow of an electric current in the circuit.
Why is it important to have a closed circuit?Closed circuit allows the flow of current in the circuit from the battery to the bulb. If the circuit is open then the current will not reach to the bulb or other appliances.
So we can conclude that It is important to have a closed circuit because it allows the flow of an electric current in the circuit.
Learn more about circuit here: https://brainly.com/question/2969220
#SPJ1
what is the angular displacement of a minute hand of a clock after 3 minutes?
Answer:
π/10 rads
Explanation:
It takes an hour (60 minutes) for the minute's hand to turn a full circle or achieve an angular rotation of
2πl rad.
Now, number of periods of 3 minutes in an hour is;
Number of periods = 60/3 = 20 periods
Thus, 3 minutes rotation accounts for 1/20 of 2π the rotation of the minute's hand in an hour.
Thus;
Angular displacement = (1/20) * 2π = π/10 rads
A well is being dug. A 4.5-kg bucket is filled with 28.0 kg of dirt and pulled vertically upward at a constant speed through a distance of 9.0 m. Determine the work done on the filled bucket in raising out of the hole.
The work done on the filled bucket in raising out of the hole is 2, 925 Joules
How to determine the work doneUsing the formula:
Work done = force * distance
Note that force = mass * acceleration
F = mg + ma
F = 4. 5 * 10 + 28 * 10
F = 45 + 280
F = 325 Newton
Distance = 9m
Substitute into formula
Work done = 325 * 9
Work done = 2, 925 Joules
Therefore, the work done is 2, 925 Joules
Learn more about work done here:
https://brainly.com/question/25573309
#SPJ1
A violin sounds a note of F sharp, with a pitch of 370 Hz. What are the frequencies of the next three harmonics produced with this note?
Answer:
Answer 740 H z, 1110 H z, 1480 H z
Explanation:
The F sharp note (370 Hz) makes the next three harmonics with frequencies of 740 Hz, 1110 Hz, and 1480 Hz, respectively.
It is necessary to have an understanding of the relationship between harmonics and the fundamental frequency in order to calculate the frequencies of the following three harmonics produced by the note F sharp, which has a pitch of 370 Hz.
The fundamental frequency, denoted by f1, is the first harmonic and corresponds to the frequency of the note (F sharp in this example) when it was initially played. Its pitch is 370 hertz.
The fundamental frequency (f1) is multiplied by two to get the second harmonic frequency (f₂), which is written as f₂ = 2 × f1.
The frequency of the third harmonic (f₃) is equal to three times the frequency of the fundamental tone, or f₃ = 3 × f₁.
The frequency of the fourth harmonic, denoted by f₄, is equal to four times the frequency of the fundamental tone. f₄ = 4 × f₁
If we know that the fundamental frequency, or f₁, is 370 hertz, then we can figure out the frequencies of the following three harmonics, which are as follows:
f₂ = 2 × 370 Hz, which equals 740 Hz
f₃ = 3 times 370 Hz, which equals 1110 Hz; f₄ = 4 times 370 Hz, which equals 1480 Hz
Following the frequency of the F sharp note (370 Hz), the next three harmonics produced have frequencies of 740 Hz, 1110 Hz, and 1480 Hz respectively.
To know more about frequency
https://brainly.com/question/254161
#SPJ2
limestone which physical property contributes to its usefulness and how?
The limestone is hard and compact and can be grinded into fine grained calcareous rocks and this contributes to its usefulness.
What are limestones?Limestone is a type of sedimentary rock that is mainly made up of mineral calcite (calcium carbonate, CaCO3).
Their physical properties include the following;
it can be yellow or colourlessit has coarse to fine grain sizeTherefore, the limestone is hard and compact and can be grinded into fine grained calcareous rocks and this contributes to its usefulness.
Learn more about calcium here:
https://brainly.com/question/26636816
#SPJ11
how is the sun bigger from the moon
The Sun is 400 times larger than the Moon, yet since it is 400 times further away from Earth than the Moon, they appear to be the same size in the Earth's sky.
it is easier to drag a stone than to kick it for the same distance. why
Answer:
it is easier to kick a stone than to drag a stone.
Explanation:
the science behind the question is fairly simple.
when you kick and object for say a (rock) you have inertia which is made from you clocking your leg back and swinging it full force forward. when you kick with inertia, you will have a much further travel distance of the object rather than dragging it which is almost set at a certain rate of how fast you are moving (m) and how much inertia you are using by pulling (p)
so m+p=i for inertia. hope this helped
A coin is located 35.0 mm from the center of a turntable which accelerates from rest to a speed of 7.95 rad/s in 0.270 s. What is the minimum coefficient of friction to avoid slippage of the coin
The minimum coefficient of friction to avoid slippage of the coin is 0.23.
Minimum coefficient of friction
The minimum coefficient of friction can determined from the maximum speed of the coin.
ma = μmg
mv²/r = μmg
v²/r = μg
v² = μgr
μ = v²/(gr)
μ = (ωr)²/(gr)
μ = ω²r/g
μ = (7.95² x 0.035)/(9.8)
μ = 0.23
Learn more about coefficient of friction here: https://brainly.com/question/20241845
#SPJ11
What will be the ratio between the initial and final kinetic energy of a car, if its velocity is tripled?
A. 1:6
B. 1:7
C. 1:8
D. 1:9
Answer:b
Explanation:
Two skaters, a man and a woman, are standing on ice. Neglect any friction between the skate blades and the ice. The mass of the man is 89 kg, and the mass of the woman is 59 kg. The woman pushes on the man with a force of 46 N due east. Determine the acceleration (magnitude and direction) of (a) the man and (b) the woman
Answer:
Acceleration of this man: approximately [tex]0.52\; {\rm m\cdot s^{-1}}[/tex] due east.
Accelerate of this woman: approximately [tex]0.78\; {\rm m \cdot s^{-1}}[/tex] due west.
Explanation:
The question implies that the net force on the man is [tex]F = 46\; {\rm N}[/tex] due east. The mass of the man is [tex]m = 89 \; {\rm kg}[/tex]. The acceleration of the man would be:
[tex]\begin{aligned} a &= \frac{F}{m} \\ &= \frac{46\; {\rm N}}{89\; {\rm kg}} && \genfrac{}{}{0}{}{(\text{due east})}{} \\ &\approx 0.52\; {\rm m\cdot s^{-2}} && (\text{due east})\end{aligned}[/tex].
In other words, the acceleration of this man would be approximately [tex]0.52\; {\rm m \cdot s^{-2}}[/tex] due east (same direction as the net force.)
By Newton's Laws of Motion, for every force there is a reaction force that is equal in magnitude but opposite in direction.
The woman in this question is applying a due east [tex]46\; {\rm N}[/tex] force on the man. Thus, this woman would experience a reaction force of the same magnitude ([tex]46\; {\rm N}\![/tex]) and opposite direction (due west) from the man. Under assumptions of the question, the net force on the woman would be [tex]\! 46\; {\rm N}[/tex] due west.
The acceleration of this [tex]m = 59\; {\rm kg}[/tex] woman would be:
[tex]\begin{aligned} a &= \frac{F}{m} \\ &= \frac{46\; {\rm N}}{59\; {\rm kg}} && \genfrac{}{}{0}{}{(\text{due west})}{} \\ &\approx 0.78\; {\rm m\cdot s^{-2}} && (\text{due west})\end{aligned}[/tex].
Perform the following mathematical operation and report the answer to the correct number of significant figures 143.6/21.2
Answer:
143.6/21.2
=6.773584906
=6.8
Calculate magnetic field strength current 3a flows in wire 2.5m and produces a force 15n
The magnetic field strength willl be 2 T. A force known as the Lorentz force acts on the charge when it is subject to an electric and magnetic field.
What is Lorentz force?Lorentz force is defined as the force acting on point charge when it is moving in an electric and magnetic field.
The given data in the problem is ;
B is the magnetic field strength =? T.
Current, I =?
L is the length of the wire
The magnetic force is found as;
F= BIL
15 N = B × 3 A × 2.5 m
B = 2 T
Hence, the magnetic field strength willl be 2 T.
To learn more about the Lorentz force refer to the link;
https://brainly.com/question/13791875
#SPJ1
Water flows through a pipe. The diameter of the pipe at point b is larger than at point a. Where is the water pressure greatest?.
The water pressure is greatest at point B which has a larger diameter in this scenario.
What is Pressure?This is defined as the force per unit area of a substance with its unit being Pascal.
The larger diameter will have more force acting on the sides which translates to a greater pressure.
Read more about Pressure here https://brainly.com/question/25736513
#SPJ1
how does the law of the conservation of energy relate to the first law of thermodynamics?
The first law of thermodynamics is similar to the conservation of energy because both state that this element (i.e., energy) is not created/destroyed in the universe.
What is the first law of thermodynamics?The first law of thermodynamics is a popular law in physics that states change in internal energy is equal to the energy added and the work made by a closed system.
Moreover, the law of conservation of energy states that it cannot be created/destroyed in the Universe, which is deeply associated with principles of thermodynamics.
In conclusion, the first law of thermodynamics is similar to the conservation of energy because both state that this element (i.e., energy) is not created/destroyed in the universe.
Learn more about the first law of thermodynamics here:
https://brainly.com/question/1613201
#SPJ1
The law of the conservation of energy relates to the first law of thermodynamics by the fact that the former forms the basis for the latter.
What is the relationship between the law of conservation of energy and the 1st law of thermodynamics?It follows from the study of physics that the basis for the postulation of the First law of thermodynamics is on the basis of the law of conservation of energy, which states that energy can neither be created nor destroyed, but can be transferred between forms.
Read more on law of conservation of energy;
https://brainly.com/question/166559
#SPJ11
When the light bulb is lit, a current is flowing through it. what condition must be met so that a current flows
Closed loop, conductor medium and presence of current in the wire are the conditions must be met so that a current flows.
What are the basic conditions for the flow of electric current?The loop from where the current passes must be closed. There must be some current in the circuit in order to lit the bulb. The medium through which current flows should be a conductor.
So we can conclude that closed loop, conductor medium and presence of current in the wire are the conditions must be met so that a current flows.
Learn more about current here: https://brainly.com/question/24858512
#SPJ1
What does puddicombe describe as the result of not taking any time out to simply look after our brains?
According to Puddicombe, the result of not taking any time out to simply look after our brains is that:
We get stressed. It also makes us to miss out on the most important things in life.What was Puddicombe's submission?In his popular talk, Puddicombe explained that we have been caught up with the internet and other activities so much so that we do not have time to look out for our brains.
For this reason, we stress our brains and become distant from the most important things in life.
Learn more about our brains and stress here:
https://brainly.com/question/154477
#SPJ1
Magnitude is used to show the brightness of one object compared with the brightness of another object with the _____ magnitude of a star referring to a star's brightness as seen from your eyes and _____ magnitude being the actual brightness of a star.
The apparent magnitude of a star refers to its brightness as seen from your eyes and absolute magnitude being the actual brightness of a star.
What is magnitude?Magnitude can be defined as a unitless measure which is used to show the brightness of an object in comparison with the brightness of another object.
Basically, there are two types of magnitude and these include the following:
Apparent magnitudeAbsolute magnitudeIn conclusion, the apparent magnitude of a star refers to its brightness as seen from your eyes and absolute magnitude being the actual brightness of a star.
Read more on absolute magnitude here: https://brainly.com/question/1056710
#SPJ1
I'm pretty sure it's apparent; absolute
a quantity that has only magnitude(size) is
Cancer and diabetes are two common hereditary diseases.
True or False?