Answer:
Please give Brainliest!
Explanation:
Material properties are dependent on the temperature. The tensile strength, yield strength and modules of elasticity decrease with increasing temperature. It should be expected that fatigue properties are also affected by the temperature.
Please help.
Why does the temperature change when a powder is dissolved in water?
Answer:
In order for the powder to dissolve, each powder molecule must separate from the other powder molecules and be surrounded by water molecules. This shift in arrangement either absorbs or releases energy depending on the situation. It is due to the exchange of energy that the temperature of the solution fluctuates.
Explanation:
:)
On the spectrum, which section has the longest wavelength and the shortest wavelength? (2 answers for this question)
Answer:
Radio waves, infrared rays, visible light, ultraviolet rays, X-rays, and gamma rays are all types of electromagnetic radiation. Radio waves have the longest wavelength, and gamma rays have the shortest wavelength.Hope i help youThe amount of energy needed to change a liquid to a solid is calculated using the enthalpy of ________ and has a __________ sign on the energy value.
This chemical equation is balanced.
F2 + 2NaBr
2NaF + Br2
How does the balanced chemical equation show the conservation of matter
in this chemical reaction?
A. There are fewer Na atoms in the reactants than in the products.
B. The number of Fatoms in the reactants equals the number of F
atoms in the products.
C. The compound NaF is a substance that is different from the
compound NaBr.
D. There are more Br atoms in the reactants than in the products.
Choose the best answer.
What is the sum?
2/3+7/15
O 14/15
O1/2
O1 2/15
O3/5
Answer:
1 2/15
Explanation:
2/3 + 7/15 = 17/15 =1 2/15
elements of the fourth period fill the 4s sublevel with electrons before filling the 3d sublevel. Also, some elements move an electron from a filled 4s sublevel to an unoccupied 3d sublevel. Explain these behaviors
Answer:
Elements fill the lowest energy subshells first(Aufbau's rule), and the 4s subshell is lower energy than the 3d, making the labeling deceiving. In some rare situations, the electrons would rather have Hund's rule be respected more, having all electrons facing one way with no doubled up because it is more stable(these are pretty rare and usually deal with transition metals like copper).
Hope this helps!
Explanation:
As it has less energy than the 3d orbital, the 4s orbital fills next. Following the filling of the electrons, 4s has more energy than 3d. Therefore, the two electrons in the 4s are at a higher energy than they could be in the 3d since it has a vacancy. As a result, electrons transition from a higher to a lower energy orbital.
What are electrons ?The elementary electric charge of the electron is a negative one, making it a subatomic particle. Due to their lack of components or substructure, electrons, which are part of the lepton particle family's first generation, are typically regarded to be elementary particles.
Since 4s electrons are bound by the nucleus farther away and more loosely than 3d electrons, 4s electrons are eliminated first rather than 3d electrons.
The 4s orbital should always be filled before the 3d orbitals, according to the Aufbau principle, although this isn't the case for the majority of elements. After Sc, electrons actually enter the 3d orbitals first because they have a lower energy than the 4s orbital.
Thus, electrons transition from a higher to a lower energy orbital.
To learn more about an electron, follow the link;
https://brainly.com/question/1255220
#SPJ2
what sea animals have moveable spines that they use for protection
Answer:
sea urchins
Explanation:
Answer:
sea urchins
Explanation:
i took the test
what is the chemical formula for Salt and hydrogen gas?
HURRY I HAVE 20 MIN LEFT will mark brainllest When. Coach Kwan notices that a player is getting tired, she takes out the tired player and substitutes a fresh player. Which type of chemical reaction does this best model?
replacement
decomposition
synthesis
oxidation
What type of volcano is formed at a weak spot in the middle of a plate?
a.
lava
c.
hot spot
b.
fault
d.
plate
Hot spot volcano is the type of volcano which is formed at a weak spot in
the middle of a plate.
Hot spot volcano is an area in the Earth crust which is characterized by large
amount of heat flow in the area due to the volcanic activity. Hot spot
volcano is formed at the middle of the plate as against junctures in which
other types are formed.
The weak spot is what gives rise to the unusual heat flow which makes hot
spot volcano most appropriate.
Read more about Hotspot volcano on https://brainly.com/question/264008
magine that you are a water molecule in a group of many water molecules. Write a letter to a friend telling them about your journey through the water cycle on Earth. You can begin your journey anywhere you’d like, but you must complete an entire cycle and end the journey where you began. Write your letter in complete sentences. Use each of the following terms correctly in your letter: • condensation • evaporation • precipitation • collection (HELP PLS ILL GIVE 54 points *all my points* AND GIVE BRAINLIEST HELP PLS)
Answer:
Explanation:
One day I was sitting on a leaf, in the early morning if a Tuesday, and I was just relaxing there. I then heard Bob( the water molecule next to me) say that he heard it was going to get pretty hot today. As the day went on I started to get pretty warm and I starting to evaporate and fly into the sky! It was really weird to see the world from up high. I stayed up there bouncing between clouds with Bob for a few hours, until the wind started to pick up and it got colder. I then started to shiver and began condensing with the other water molecules (and Bob). As it got colder we began to plummet to the earth really fast in the precipitate form of a water droplet. We hit the ground with a big ker-plop! I looked around me and we weren't the only ones. A bunch of other droplets had started to collect and form a puddle.
Hope this helps!
All three types of rock form in which earth layer?
Answer:
Lithosphere
Explanation:
All three types of rock make up the Earth's lithosphere, the outermost layer. The lithosphere averages about 100 kilometers in thickness.
1.The two green substances are not same thing because some of their properties are different and some of them are the same. If they were the same substance, all of their properties would have to be the same.
How could the explanation be improved?
Answer:
Even though the two substances possess many similarities, they have some unique properties. In turn, since they have the same properties, if they were the same substance, it would make matters worse, if the same chemical was in two different places, there would not be a difference between them since they are the same, just as it is with are two different chemicals would have differing properties since they are two properties would vary from one another since they are 2 totally different things!
Explanation:
How many grams are in 3.4 moles of Lead (IV) Sulfate (Pb(SO4)2)? ) Molar mass: 303.26 g/mol 131.0840
Answer:
1031.084g
Explanation:
n=m/M
m=n(M)
m = (3.4mol)(303.26g/mol)
1031.084g
Hope that helps
Answer:
1031.08
Explanation:
You start with 3.4 moles and you know that 6.022 x 10 ^ 23 = 1 mole( Avogadro's Number), so you just multiply those 2 numbers and the moles will cancel leaving you with grams of Lead Sulfate.
in which time period did the first animals that could live both in water and on land appear
if you mix calcium hydrogen and carbon how many compounds will you have?
Answer:
Calcium monohydride is a molecule composed of calcium and hydrogen with formula CaH. It can be found in stars as a gas formed when calcium atoms are present with hydrogen atoms.Calcium carbonate is a chemical compound with the formula CaCO3 formed by three main elements: carbon, oxygen and calcium.
Explanation:
MARK ME AS A BRAINLIST PLZ
In order for a chemical reaction to take place, a certain amount of _____ must be present.
Answer:
The answer is energy. Please give me Brainliest!
Explanation:
Raising the concentrations of reactants makes the reaction happen at a faster rate. For a chemical reaction to occur, there must be a certain number of molecules with energies equal to or greater than the activation energy.
the speed of sound is greater through a solid than through a gas because the molecules in a solid are
A. still
B. vibrating
C. farther apart
D. closer together
How many moles of nitrogen dioxide, NO2, are present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L
There are 0.436 moles of nitrogen dioxide, NO2, present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L.
IDEAL GAS LAW:The number of moles of nitrogen dioxide (NO2) in this question can be calculated by using the ideal gas law equation as follows:
PV = nRT
Where;
P = pressure (atm)V = volume (L)T = temperature (K)R = gas law constant (0.0821 Latm/molK)n = number of molesAccording to the reaction conditions given in this question;
P = 2.46 atmV = 4.8Ln = ?T = 330K2.46 × 4.8 = n × 0.0821 × 330
11.81 = 27.093n
n = 11.81 ÷ 27.093
n = 0.436mol
Therefore, there are 0.436 moles of nitrogen dioxide, NO2, present if the reaction conditions are 330 K, 2.46 atm, and 4.8 L.
Learn more about the ideal gas law at: https://brainly.com/question/4147359?referrer=searchResults
Compare sodium and silver before and after they are placed in water. Has a new substance been produced in each case?
Answer:
Sodium is placed in group 1 of the periodic table of Alkali metals, and has a valence shell with one electron, making them very reactive. When placed in water, it disperses heat and begins to ignite and burn (due to its very reactive nature), resulting compound is hydrogen gas (H2), and a very strong base (Sodium Hydroxide, NaOH) used for cleaning appliances and for neutralizing agents.
Silver is placed on the transitional metal section of the periodic table, not quite reactive but is the most conductible element on the planet, is malleable and ductile. Due to it being costly and its rarity, it's not relied on for computer parts or wires. Silver doesn't actually directly react with water in its liquid state. It does produce hydrogen gas and Silver Oxide when reacting with water vapour.
In short, Sodium and water create new products, while Silver and water (only in water's gaseous form) form different products.
Compare the structure and bonding of the three compounds:
• carbon dioxide
•magnugum ondo
•silicon dioxide
(6 mark question)
Silicon dioxide is a covalent network solid. Magnesium oxide is an ionic compound while carbon dioxide is a covalent molecule.
Carbon dioxide is a covalent compound. The compound contains polar C-O bonds but overall the compound is nonpolar as such the molecules are held together by only weak dispersion forces.
The compound magnesium oxide is an ionic solid. It is composed of magnesium ions and oxygen ions in a crystal lattice. Owing to the fact that the ions are very small, the lattice energy is large and the compound is almost insoluble in water.
Silicon dioxide is a covalent network solid which is composed of chains of silicon - oxygen bonds. The network solid forms a very rigid structure having a high melting point.
Learn more about network solids: https://brainly.com/question/8236583
what is the chemical formula of tetraphosphorus heptasulfide?
Answer: P4S7
Explanation:
Name two elements that have the same properties as sodium (Na)
Answer: Any Alkali metal
Explanation:
T he cool thing about the periodic table is the way it is organized. You can find chemical with similar properties is just looking in the column they are in in to determine the answer. Since Na is in the first column, any of these answer can work:
Li, K, Rb, Cs, and Fr
If two atoms have an electronegativity difference of 1.3, what type of bond would form between them?
Select one:a. non polar covalent b. polar covalent. c. ionic
Answer:
I would say iconic bond
Explanation:
Please help need to turn in
Answer:
2. d
3. i
4. e
5. j
6. g
7. a
8. f
9. b
Explanation:
do a few searches when you have time to deepen understanding!
How many moles of aluminum are needed to react completely with 2.1 moles of FeO? 2Al(s) + 3FeO(s) 3Fe(s) + Al2O3(s)
Answer:
1,4 mol
Explanation:
2 mol of Al reacts with 3 mol of FeO so for 2.1 mol of FeO you need 2 x 2.1 / 3 = 1.4mol
A ball rolls down a hill. It starts with velocity of 2 ms. After 2 seconds, the ball has a velocity of 12 ms. What is the acceleration of the ball? 2 ms2 4 ms2 5 ms2 7 ms2
Answer:
5 ms2
Explanation:
The acceleration of the ball is 5 ms2.
What is acceleration?Acceleration is the rate at which an object's velocity with respect to time changes. It is a vector quantity to accelerate (in that they have magnitude and direction). The direction of the net force acting on an object determines the direction of its acceleration.
The acceleration of the car in its present direction of motion is referred to as a linear acceleration (or tangential acceleration in circular motions), and the passengers on board feel a force pressing them back into their seats as a result.
The acceleration that is used to change direction is referred to as radial acceleration (or centripetal acceleration in circular travels), and the reaction that the passengers feel is a centrifugal force.
Therefore, The acceleration of the ball is 5 ms2.
To learn more about acceleration, refer to the link:
https://brainly.com/question/12550364
#SPJ2
Please help! i will give brainliest!
When a solid air freshener gets smaller over time and runs out is it a physical change or chemical change? please say why?
Answer:
i think this would be an example of a physical change because here the substance is changing directly from a solid to a gas without passing through the liquid state which means that the composition of the substance has not changed and remains the same. This is also called sublimation.
New research shows that a red food colouring with an R value of 0.62 (when a particular solvent and temperature are used) could be dangerous to certain people. Samples of food colouring from two different red sweets were collected and the chromatogram bolow was produced. For each of the sweets, state and explain whether or not you would recommend that the sweets are taken off the market based on this research,
It is recommended only for the second type of candy to be taken off the market.
Based on the background information, if a candy shows a 0,62 Rf value in the chromatography it is considered potentially dangerous, and therefore it should be taken off the market.
The Rf value is calculated using the following formula:
Rf = Total distance traveled by a component/ Total distance from the pencil line to the solvent frontNow, let's find out if any of the components has an Rf equal to 0,62.
Note: To determine the distances I measured the image using a ruler and you can do the same, this will not alter the results.
Sample 1Total distance traveled by the component: 6cmTotal distance: 7 cmRf : 6 cm/ 7 cm = 0.852. Sample 2
Total distance traveled by the component: 4.34cmTotal distance: 7 cmRf : 4.34 cm/ 7 cm = 0.62This means sample 2 has the 0.62 Rf value and therefore it needs to be taken off the market.
Learn more about chromatography in: https://brainly.com/question/10296715
250 mL of argon gas is held in a flexible vessel shown above. If
the pressure changes to 12.0 atm, what is the new volume of
the gas at 20°C?
The new volume of the gas at 20 °C is 205 mL
From the question given above, the following data were obtained:
Initial volume (V₁) = 250 mL Initial pressure (P₁) = 10 atmInitial temperature (T₁) = 25 °C = 25 + 273 = 298 KNew pressure (P₂) = 12 atmNew temperature (T₂) = 20 °C = 20 + 273 = 293 KNew volume (V₂) =?With the application of the combine gas equation, we can obtain the new volume of the gas as illustrated below:
[tex]\frac{P_1V_1}{T_1} = \frac{P_2V_2}{T_2} \\ \\ \frac{10 \times 250}{298} = \frac{12 \times V_2}{293} \\ \\ \frac{2500}{298} = \frac{12 \times V_2}{293} \\ \\ cross \: multiply \\ \\ 298 \times 12 \times V_2 = 2500 \times 293 \\ \\ divide \: both \: side \: by \: 298 \times 12 \\ \\ V_2 = \frac{2500 \times 293}{298 \times 12} \\ \\ V_2 = 205 \: mL \\ [/tex]
Therefore, the new volume of the gas is 205 mL
Learn more about gas laws: https://brainly.com/question/6844441
The new volume of the gas at the given pressure and temperature is 205 mL.
The given parameters:
Initial volume of argon, V₁ = 250 mLInitial pressure of gas, P₁ = 10 atmFinal pressure of the gas, P₂ = 12 atmInitial temperature of the gas, T₁ = 25 ⁰C = 273 + 25 = 298 KFinal temperature of the gas, T₂ = 20 ⁰C = 273 + 20 = 293 KThe new volume of the gas is calculated by applying general gas equation as follows;
[tex]\frac{V_1 P_1}{T_1} = \frac{V_2P_2}{T_2} \\\\V_2 = \frac{V_1P_1 T_2}{T_1P_2} \\\\V_2 = \frac{(250\ mL) \times 10 \times 293}{298 \times 12} \\\\V_2 = 204.84 \ mL\\\\v_2 = 205 \ mL[/tex]
Thus, the new volume of the gas at the given pressure and temperature is 205 mL.
Learn more about general gas equation here:
