which refers to a measure of how acidic or basic a solution is? ph solubility reactiveness hardness; which solution has the greatest number of hydroxide ions?; which is formed by positive ions from a base and negative ions from an acid?; which product contains a strong base that would most likely completely dissolve in water?; a solution has a ph of 8. which best describes the solution?; which best describes the ph scale?; which is the order of these solutions from strong acid to strong base?; carla is using a fertilizer that contains nitric acid. how is nitric acid classified?

The low-spin compound in this set of compounds is K₄[Fe(CN)₆].

The spectrochemical series is a list of ligands ranked in order of their ability to stabilize low-spin complexes. According to the series, CN⁻ is the strongest low-spin ligand, followed by Cl⁻, CO₃⁻, and oxalate. Therefore, the compound that is most likely to be low-spin is K₄[Fe(CN)₆]. The other compounds on the list are more likely to be high-spin because the ligands they contain are weaker than CN⁻ at stabilizing low-spin complexes.

Since it is near the high-spin end of the spectrochemical series (i.e. it has a high coordination number and a high oxidation state). The other compounds in the set all have lower coordination numbers and/or lower oxidation states, so they are more likely to be high-spin.

In general, the more electrons an atom has in its outer shell, the more likely it is to be low-spin. Therefore, compounds with higher oxidation states and higher coordination numbers are more likely to be low-spin.

Hence, K₄[Fe(CN)₆] has a low spin with a strong field ligand in the spectrochemical series.

To know more about the spectrochemical series, click below:

https://brainly.com/question/29696232

#SPJ4

To achieve the recommended ph of the soil in his soil, the farmer should use quick lime or slaked lime, or calcium carbonate.

In general, the plants will grow best in neutral soil pH. When the soil pH property is acidic, it can decrease the availability of essential nutrients and decrease plant production. Limestone is the most common way to increase the pH of soil.

The other way to increase the pH value of soil is, by mixing the soil using a lime-based compound like dolomite lime or agricultural lime. The finer the particles of limestone, the more rapidly it becomes effective.

To know more about the pH value of soil,

https://brainly.com/question/24119345

TRUE, 1-(bromomethyl)cyclopentene is the main byproduct of the treatment of methylenecyclopentane with dichloromethane.

Even though dichloromethane is really the least hazardous C1 chlorohydrocarbon, it nevertheless poses risks. Its inhalation can result in symptoms like fatigue, inflammation of the respiratory tract, and even death. It also might be carcinogenic, but insufficient research has been done to determine the level of exposure likely causes cancer.

Dichloromethane, another name for methylene chloride, is an odorless, flammable liquid with a volatile nature similar to chloroform. Paint stripping, the production of pharmaceuticals, the production of paint removers, and the cleaning and degreasing of metal are just a few of the businesses that employ methylene chloride in diverse industrial processes.

To know more about dichloromethane visit:

https://brainly.com/question/14159340

#SPJ4

The acids are generally named depending on the type of acids that are involved. It could be binary, ternary, oxoacids carboxylic acids, and hydroxyl acids.

a) HF is Hydrofluoric acid which is an example of Binary acid: Acids containing two elements, such as hydrochloric acid (HCl), sulfuric acid (H₂SO₄), and nitric acid (HNO₃).

b) Ba(OH)₂ is Barium hydroxide is a basic compound which is alkaline in nature.

c) H₂CO₃ is Carbonic acid which is an example of Ternary acid: Acids containing three elements, such as phosphoric acid (H₃PO₄) and carbonic acid (H₂CO₃).

d) HNO₃ is Nitric acid which is an example of binary acid.

e) H₂SO₄ is Sulfurous acid which is an example of binary acids

f) HBrO₂ is Bromous acid which is an example of an Oxoacid: Acids containing oxygen, such as nitrous acid (HNO₂) and perchloric acid (HClO₄).

g) CH₃COOH is an Ethanoic acid which is an example of Carboxylic acid: Acids containing the carboxyl functional groups, such as acetic acid (CH₃COOH) and formic acid (HCOOH).

To know more about the king of acids, click below:

https://brainly.in/question/5364789

#SPJ4

In the dilution equation, the units can vary when expressing the volume of the solute and the solvent, as long as the same units are used on both sides of the equation. The correct answer is option c.

The dilution equation is used to calculate the concentration of a solution that has been diluted by adding more solvent. The equation is:

[tex]\rm C_1V_1 = C_2V_2[/tex]

Where, [tex]\rm C_1[/tex] is the initial concentration, [tex]\rm V_1[/tex] is the initial volume, [tex]\rm C_2[/tex] is the final concentration, and [tex]\rm V_2[/tex] is the final volume.

When using this equation, it is important that the units of volume are the same on both sides of the equation.

Therefore, when expressing the volume of the solute and the solvent, the units can differ as long as the same units are used on both sides of the equation. Option c is the right choice.

Learn more about dilution here:

https://brainly.com/question/33382662

#SPJ12

Your question is incomplete but most probably your full question was:

In the dilution equation, units can vary when expressing which of the following (so long as the same units are used on both sides of the equation)?

a. amount of solute

b. density

c. volume

d. none of the above

The weight of the container after the wax hardens is 0.18 N.

We know that according to the law of the conservation of mass, the mass of an object can neither be created nor destroyed but it can be changed from one form to the other.

Looking at this law, we know that the mass would not change even after the time that the wax must have hardened. The total mass of the wax would have to be a constant.

Total mass would now be;

Mass of the wax + mass of the container

= 3 g + 15 g

= 18 g

Weight = 18/1000 * 9.8 m/s^2

= 0.18 N

Learn more about mass:https://brainly.com/question/13383562

#SPJ1

A sugar, a phosphate group, and a base with nitrogen make up a nucleoside. A nucleotide is made up of a sugar, a phosphate group, and a base that contains nitrogen.

When preparing samples for chemical analysis, nitrogen is frequently utilized. Liquid sample concentration and volume reduction are accomplished using it. The chemical sector depends on nitrogen as well. It is used to make explosives, nylon, nitric acid, and fertilizers.

Each year, inhaling "air" with insufficient oxygen results in fatalities. Since nitrogen gas makes up 78 percent of the air we breathe, many people believe it to be safe. Nitrogen is only safe to breathe, though, when combined with the right amount of oxygen.

To know more about Nitrogen visit:

https://brainly.com/question/16711904

#SPJ1

The buffers with high and low pH had the least change; they are buffers that resist changes in pH.

To learn more about Buffers refer to:

https://brainly.com/question/4177791

#SPJ4

C

An hydrogen atom absorbs energy then the electron moves from lower to higher shell number.

Also if the wavelength is longest then energy difference is minium as wavelength and energy are inversely proportional.

Energy difference is directly proportional to (1/n1^2 - 1/n2^2).

Hence we want this quantity as minium for minimum energy and longest wavelength.

a)(1/1 - 1/4) =0.75

b)(1/16 - 1/36) =0.035

v)(1/36-1/49)=0.00737

D)Not the answer as n=5 to n=4 means energy is released.

e)(1/4-1/9) =0.139

Hence the minimum value is c transition.

Hence the answer is option c.

So an hydrogen atom absorbs energy then the electron moves from lower to higher shell number.

To know more about longest wavelength, click here:

https://brainly.com/question/20564746

#SPJ4

The enthalpy of combustion of a substance is the heat released when a given amount of the substance burns. To calculate the enthalpy of combustion of 1 mole of ethanol, we can use the following equation:

ΔHcomb = [-ΔHf(products) + ΔHf(reactants)]

Where ΔHf is the standard molar heat of formation, and the values have to be looked up in a thermochemistry table.

ΔHcomb = [-ΔHf(CO2(g)) - ΔHf(H2O(l)) + ΔHf(C2H5OH(l))]

ΔHcomb = [-(-393.5) - (-285.83) + (-235.53)] = -865.36 kJ/mol

So the enthalpy of combustion of 1 mole of ethanol is -865.36 kJ/mol.

Note that the enthalpy of combustion is an exothermic process, as the enthalpy is negative, which means that heat is released during the combustion of ethanol.

Enthalpy of combustion is a measure of the heat released during a chemical reaction in which a substance, typically a fuel, is burned in the presence of oxygen. It is defined as the change in enthalpy that occurs when a substance is completely burned in a steady-state process, typically at constant pressure. It is represented by the symbol ΔHc and is measured in units of energy per mole of substance, such as joules per mole (J/mol) or kilojoules per mole (kJ/mol).

The enthalpy of combustion is a measure of the energy content of a fuel and is an important property in thermochemistry. It is used to determine the energy efficiency of fuels and combustion processes and to compare the energy content of different fuels. In general, fuels with higher enthalpies of combustion release more energy when burned and are more efficient.

Learn more about enthalpy of combustion in brainly.com/question/14754029

#SPJ1

ZnBr2 is the only compound that will precipitate when combined with LiOH.

In this case,

a reaction between LiOH and ZnBr2 would be as follows;

2LiOH + ZnBr2 ----------> 2LiBr + Zn(OH)2 (s)

Zn(OH)2 is an insoluble salt and will precipitate out in the solution.

Learn more about precipitation reaction refer to :

https://brainly.com/question/13016165

#SPJ1

The study of a molecule's three-dimensional structure is known as stereochemistry. The sole structural difference between the cis and trans isomers, which are types of stereoisomers, is where the atoms of the molecule are situated in three dimensions.

Stereochemistry is a branch of chemistry that studies and manipulates the relative spatial arrangement of atoms within molecules.

Because a drug's shape affects how it interacts with the different biological molecules (enzymes, receptors, etc.) that it comes into contact with in the body, stereochemistry is crucial to understanding how drugs work.

To know more about stereochemistry visit:-

https://brainly.com/question/13266152

#SPJ4

The aqueous solution is represented by the symbol (aq). Aqueous solution (aq) denotes a substance that has been dissolved in water.

Water acts as the solvent in an aqueous solution. In balanced chemical equation, it is frequently expressed by appending to the corresponding chemical formula. For instance, Na+ + Cl might be used to depict a solution of table salt, or sodium chloride, in water.Aqueous solutions are composed of both water and one or more dissolved substances, Solid, gases, or other liquids can all dissolve in an aqueous solution

Learn more about Aqueous solutions here:

https://brainly.com/question/22280117

#SPJ4

The amino acid that would contribute most significantly to the stability of the tertiary structure of a protein is : cysteine.

Cysteine is a semi essential proteinogenic amino acid that has the formula HOOC−CH−CH₂−SH. The thiol side chain in cysteine participates in enzymatic reactions as a nucleophile.

The formation of disulfide bridges by oxidation of the sulfhydryl groups on cysteine is a very important aspect of the stabilization of protein tertiary structure. This allows different parts of the protein chain to be held together covalently.

Very high doses of cysteine may be toxic to human cells and may lead to death.

To know more about cysteine, refer

https://brainly.com/question/28287226

#SPJ4

According to Avogadro's number there are 62.53 atoms of chlorine in 1.1x 10[tex]^-21[/tex] moles of Cl atoms.

Avogadro's number is defined as a proportionality factor which relates number of constituent particles with the amount of substance which is present in the sample.

According to the definitions, Avogadro's number depend on determined value of mass of one atom of those elements.It bridges the gap between macroscopic and microscopic world by relating amount of substance with number of particles.

Number of atoms can be calculated using Avogadro's number as follows: mass/molar mass×Avogadro's number or number of moles×Avogadro's number.

ON substitution in above formula number of atoms=1.1×10²¹×6.023×10²³=62.53 atoms

Thus, there are 62.53 chlorine  atoms in 1.1x 10[tex]^-21[/tex] moles of Cl atoms.

Learn more about Avogadro's number,here:

https://brainly.com/question/11907018

#SPJ1

Molar concentration

To calculate the Molar Concentration, we will find the molar concentration by dividing the moles by liters of water used in the solution. For example, the acetic acid here is completely dissolved in 1.25 L of water. Then divide 0.1665 moles by 1.25 L to get the molar concentration, which will be 0.1332 M.

- Molarity [tex]$=w^2 / M^2 x(1000 N)$[/tex]

1. where[tex]$w^2=$[/tex] Weight of solut[tex]e $=2.60 \mathrm{~g}$[/tex]

2.[tex]$M^2=$[/tex] Molecular weight of solute [tex]$=58.5$[/tex]

3. Volume of the solution in ml=40

4. Molarity = ?

- So Molarity (M)=(2.60 / 58.5) x(1000 / 40)

So Molarity (M)= (2.60/58.5) x(1000/40)

Molarity (M) = 1.111 M

To learn more about Molar concentration visit:

https://brainly.com/question/29429999

#SPJ4

The formal charge is a hypothetical charge assigned to an atom in a molecule assuming that all the bonded electrons are equally shared among the atoms forming the two bonds.

The formal charge is the discrepancy between the atom's number of valence electrons and the number it possesses.

Even though we frequently presume they are the same, formal charge and oxidation state are two separate concepts. While the oxidation state regulates the number of electrons exchanged between atoms during the synthesis of a molecule, the formal charge specifies the number of electrons that occur around an atom of a molecule.

When adjacent formal charges are negative or of the opposite sign, Lewis structures are preferred. The Lewis structure with the negative formal charges on the most electronegative atoms is the one to choose from when faced with a choice between numerous Lewis structures with similar formal charge distributions.

To learn more about formal charges visit the link:

https://brainly.com/question/28811018?referrer=searchResults

#SPJ4

The possible products of the Substitution reaction of (r)-3-chloro-3-methylhexane with methanol and heat are A and D.

The substitution reaction of (r)-3-chloro-3-methylhexane with methanol and heat is a nucleophilic substitution reaction. In this reaction, the chlorine atom in (r)-3-chloro-3-methylhexane acts as the leaving group, while the methanol serves as the nucleophile. The reaction proceeds through a series of steps:

1. The chlorine atom in (r)-3-chloro-3-methylhexane is protonated by the hydrogen atom in methanol. This creates a positively charged carbon-chlorine bond.

2. The nucleophilic attack of the methanol molecule onto the positively charged carbon-chlorine bond results in the formation of a covalent bond between the two molecules.

3. The newly formed covalent bond is then broken by the removal of the chlorine atom from the molecule, leaving behind a positively charged methoxy group.

4. The positively charged methoxy group is then protonated by the hydrogen atom in methanol, resulting in the formation of a new covalent bond between the two molecules.

5. Heat is then applied to the reaction mixture, which increases the reaction rate and facilitates the formation of the desired product, (r)-3-methyl hexane-2-methanol.

This substitution reaction is an example of a nucleophilic substitution reaction, which is a type of chemical reaction in which a nucleophile (a molecule with an electron-rich center) replaces a leaving group (a molecule with an electron-poor center) from a substrate molecule.

Hence A and D are the products of the reaction. The image attached below explains Clearly the reaction.

To know more about Substitution reaction, click below:

https://brainly.com/question/10143438

#SPJ4

The differences between each of the pair is a. secondary and tertiary protein structures of protein.

a. No sharp dividing line exists between

secondary and tertiary structures. Secondary structure refers to the spatial arrangement of amino acids close to one another on a polypeptide chain, whereas tertiary structure refers to the three-dimensional arrangement of all atoms of a polypeptide chain. Among the most important factors in maintaining 3° structure are disulfide bonds, hydrophobic interactions, hydrogen bonding, and salt linkages ; Secondary structure is mainly defines by H-bonding between amino acids in localized regions of a polypeptide or protein

b. Essential amino acids cannot be made by metabolic process of human body, Essential amino acids can be synthesized by human body.

c. The amino acids are divided into 2 categories: those with nonpolar side chains are Non-polar amino acids ( exp. Alanine, Leucine ) , and with polar side chains like acidic side chains ( Aspartic acid) , basic side chains (lysine) and -OH/-SH groups (serine) in side chains are Polar amino acids.

d. A molecule containing two amino acids joined by an amide bond (-CONH-) is called a dipeptide. Those containing 3 amino acids

are called tripeptides. ( di-, tri- indicates No. of Amino acids )

e. Collagen consists of a triple helix made of the repetitious amino acid sequences , it is tertiary structures, whereas a-Helix is Secondary structure.

f. a-Helix, is a type of secondary structure in which a section of polypeptide chain coils into a spiral, most commonly a righthanded spiral. b-Pleated sheet is also

a type of secondary structure in which sections of polypeptide chains are aligned

parallel or antiparallel to one another.

g. Quaternary structure, is The arrangement of polypeptide monomers into

a noncovalently bonded aggregate. Many proteins or polypetides in tertiary structure constitues Quaternary structure.

Learn more about proteins structure here:

https://brainly.com/question/28366854

#SPJ4

Nitrogen gas (N2) diffuses into the soil from the atmosphere, and species of bacteria convert this nitrogen to ammonium ions (NH4+), which can be used by plants.

What is soil?

Soil, also commonly referred to as soil or soil, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life. Some scientific definitions distinguish soil from soil, especially by restricting the former term to displaced soil.

Therefore, Nitrogen gas (N2) diffuses into the soil from the atmosphere, and species of bacteria convert this nitrogen to ammonium ions (NH4+), which can be used by plants. Soil, also commonly referred to as soil or soil, is a mixture of organic matter, minerals, gases, liquids, and organisms that together support life.

To lean more about soil refer the given link:-

https://brainly.com/question/23968927

#SPJ4

The arrow in a chemical reaction means

A chemical reaction is a procedure that causes one group of chemical components to change chemically into another. Chemical reactions, which can frequently be described by a chemical equation, traditionally include changes that only affect the locations of electrons in the formation and dissolution of chemical bonds between atoms, with no change to the nuclei.

At a specific temperature and chemical concentration, chemical reactions occur at a predictable reaction rate. Because there is more thermal energy available to attain the activation energy required to break bonds between atoms, reaction rates often increase as temperature rises.

The arrow in the reaction is telling us that what we have in the left hand side of the equation has resulted in the equation that we have on the right.

Learn more on chemical reaction here https://brainly.com/question/25769000

#SPJ1

Answer:

A and C

Explanation:

Got it right on the pretest

Alkenes experience electrophilic addition reactions. Cross-bond addition of electrophiles occurs. Because the double bond has a higher electron density and acts as a neucleophile in the given reaction, the H+ is across

Since they have a low level of electrons, electrophiles can accept a pair of electrons from species that have a high level of electrons. Carbocations and compounds with carbonyls are two examples. An electron-rich species known as a nucleophile gives electron pairs to other species that lack electrons. Examples include cyanide ions, carbanions, water, ammonia, and more.

An electrophile is a reagent that accepts two electrons to create a new covalent bond. Let's now discuss electrophilicity, often known as "electron-loving" or "loving negative charge." In order to create a new covalent bond, an electrophile species must receive two electrons.

To know more about electrophilic visit:

https://brainly.com/question/28026083

#SPJ4

Re-crystallizing material does not precipitate from solution bring the substance back from the solution Break glass using an ice bath.

Chemicals are purified through the physical process of recrystallization in accordance with their varying solubilities. The procedure is finished by heating the substance to dissolve the impurity-containing chemical in a mixture of a solvent system.

The solute, which needs to be purified, is dissolved in a suitable hot solvent prior to recrystallization. As the liquid cools, the solute reaches saturation in the solution and crystallizes, producing a solid.

To know more about  recrystallisation visit:

https://brainly.com/question/13349160

#SPJ4

Volume of 0.20 M sodium acetate is calculated to be 0.82g. Sodium acetate can  be used as additives in food, industry and in buffer solutions.

To determine  pH of a buffer is by using the Henderson–Hasselbalch equation is pH = pKₐ + log([A⁻]/[HA]).

As we know that, pH = pKa + log [salt]/[acid]  

Given pH (4.75) and  pKa (4.75).

Given [acid] = 0.20 M

When the pH = pKa, ratio of [salt]/[acid] =1 because log 1 = 0

Hence,[sodium acetate] = 0.20 M.  

4.75 = 4.75 + log [sodium acetate]/[0.20]

0 = log x/0.2

Hence, x = 0.2 M

To calculate the "amount" in grams, convert 0.20 M to grams using the volume of 50 ml (0.05 L)

0.20 mole/L x 0.05 L = 0.01 moles moles sodium acetate

0.01 moles sodium acetate x 82 g/mole

Volume of 0.20 M sodium acetate= 0.82g

To know more about Henderson-Hasselbalch equation, refer

https://brainly.com/question/26746644

#SPJ4

Following statements that correctly describe the relationship between the parameters investigated in the Boyle's law experiment ;

-As pressure increases from (a) to (b) to (c), the volume of the gas decreases.

-The variable parameters are pressure and volume.

-The number of moles of gas remains constant.

Boyle’s Law :- Boyle's Law states that when the temperature of a given mass of confined gas is constant, the product of its pressure and volume is also constant (p * V = constant). When comparing the same substance under two different sets of conditions, the law can be expressed as: P1V1 = P2V2, showing that as volume increases, the pressure of a gas decreases proportionally, and vice versa.

Boyle's Law is named after Robert Boyle, who published the original law in 1662.

To learn more about Boyel’s law visit here ; https://brainly.com/question/1696010

#SPJ4

If an aqueous solution with concentrated hydrobromic acidity contains 48% by mass of HBr, then the molarity of HBr is 8.9 M.

The term "Molarity" is derived from the unit of measurement called a mole, which is used to describe chemical substances. Determining the amount of substance present in a certain chemical solution is done using a concept known as molarity, commonly known as the molecular concentration of a solution.

The most frequent measure of molarity in chemistry is the amount of moles per liter, denoted by the unit notation mol/L or mol/dm3 in SI units. A solution with a level of one mol/L is referred to as 1 molar, or 1 M.

To know more about molarity visit:

https://brainly.com/question/8732513

#SPJ4

The correct question is :

An aqueous solution of concentrated hydrobromic acid contains 48% HBr by mass. If the density of the solution is 1.50 g/mL, what is its concentration?

1.30×10 W is the maximum allowable heat rate that can be generated by the electronic device to maintain the temperature below 85°C for an unfinned package.

Write the equation conduction resistance

Rcond = d/kA.........(1)

Consider the following and substitute the values:

From the table of 'thermo physical properties of selected nonmetallic solids' at a temperature of 300K.

The thermal conductivity of Silicon carbide, k is given by 490 W/m - K

Dimension of the electronic device,

W=10x10⁻⁶m

Find the cross-sectional area

A=W²

= (10x10⁻⁶)² m²

Rcond = 100×10⁻⁹/490×(10×10⁻⁶)^2

           = 2.04 K/W

The equation Convection resistance is given as follows:

Rconv = 1/hA

Consider the following and substitute the values:

Heat transfer coefficient of coolant

h= 1×10 W/m² K and

A= (10×10⁻⁶)² m²

Rcond = 1/10⁵x(10x10⁻⁶)^2

           = 1×10⁵ K/W

Find the heat rate by using the following equation

q= T1- Tinfinity/ Rcond + Rconv...........(3)

  = 2(85-20)/ (2.04+10⁵)

q  = 1.30×10 W

Thus, the maximum allowable heat rate that can be generated by the electronic device to maintain the temperature below 85°C for the unfinned package is 1.30×10 W.

To know more about conduction, click below:

https://brainly.com/question/12767362

#SPJ4

The mass of 1 mole of phosphorus atoms is calculated to be 30 grams.

Mass number of an atom is defined as the sum of total number of protons and neutrons present in an atom. The mass number of any element is calculated by the formula:

Mass Number (A) = Number of Protons + Number of Neutrons

On the other hand, atomic number is defined as the total number of protons present in an atom.

Therefore, it is calculated experimentally that mass number of phosphorous is 30 g/mol whereas atomic number of phosphorous is 15.

Therefore, the mass of 1 mole of phosphorus atoms is 30 grams.

Learn more about mass number from the link given below.

https://brainly.com/question/28526177

#SPJ4

The potassium valence electron's atomic number, K=19, corresponds to the correct quartet of four quantum numbers.

An electron is a negatively charged subatomic particle, whether it is linked to or detached from an atom (not bound). Along with neutrons and protons the electron is a constituent particle of an atom and is one of the three primary types of particles found there.

GitHub created the open source package called Electron to help developers create cross-platform desktop applications using JavaScript, HTML, and CSS. By fusing Chromium and Node, Electron achieves this. It is possible to package apps for Mac, Win, and Linux using JavaScript into a single runtime.

To know more about electron  visit:

https://brainly.com/question/1255220

#SPJ4

The process by which acetyl CoA binds to citrate synthase's binding pocket and the intermediate product of the reaction between acetyl CoA and citrate synthase.

What happens before the acetyl CoA and oxaloacetate reaction is shown below. Analogs of transition states and reaction intermediaries. In a reaction that is mediated by an enzyme, transition state analogues are temporary forms of the substrate. These substrate analogues for the transition state will be such that the enzyme catalyzing the process can readily stabilize them. Complexes called reaction intermediates exist between the time the enzyme binds to the substrate and the time the product is liberated from the enzyme. Reaction intermediates are complexes made up of an enzyme and its substrate (ES) and an enzyme and its product (EP).

Learn more about acetyl here

https://brainly.com/question/12488134

#SPJ4