The scrum ceremony that provides customer feedback on working software from the team is Sprint review
What is a Scrum ceremony?The Sprint Review is a Scrum ritual that allows customers to provide feedback on team-developed functioning product.
The team presents the iteration of the product that they have built throughout the sprint during the Sprint Review, which is held at the conclusion of each sprint. The team shows the functioning software to the stakeholders—including the client—during the review and solicits their comments.
This input enables the team to comprehend the customer's viewpoint, verify their presumptions, and make any necessary alterations or enhancements to the product prior to the following sprint.
Learn more about scrum ceremony at: https://brainly.com/question/30158653
#SPJ4
Which OSPF component is identical in all routers in an OSPF area after convergence?
A. adjacency database
B. link-state database
C. routing table
D. SPF tree
The OSPF component which is identical in all routers in an OSPF area after convergence is link-state database. The Option B.
Which OSPF component is identical in all routers?After convergence in an OSPF area, the link-state database becomes identical in all routers. The link-state database contains information about the state of all links within the area including network topology and link costs.
Each router independently builds its link-state database based on the OSPF advertisements it receives from neighboring routers. Once the OSPF routers have exchanged and processed all information, the link-state databases in all routers should contain the same information, ensuring consistent routing decisions within the area.
Read more about OSPF component
brainly.com/question/32112514
#SPJ4
What is the floor of Class E airspace when designated in conjunction with an airway?
Select one:
a. 700 feet AGL.
b. 1,500 feet AGL.
c. 1,200 feet AGL.
correct answer to the question is b. 1,500 feet AGL when the Class E airspace is designated in conjunction with an airway that is 4 NM or wider.
When Class E airspace is designated in conjunction with an airway, the floor of the airspace depends on the width of the airway. If the airway is less than 4 nautical miles (NM) wide, then the floor of the Class E airspace is 1,200 feet above ground level (AGL) within 4 NM either side of the airway centerline. If the airway is 4 NM or wider, then the floor of the Class E airspace is 1,500 feet AGL within 4 NM either side of the airway centerline.
To know more about AGL visit:
brainly.com/question/14701469
#SPJ11
what is the opposition to current flow in an ac circuit caused by an inductor called?
The opposition to current flow in an AC circuit caused by an inductor is called inductive reactance. Inductive reactance is a measure of the ability of an inductor to resist changes in the current flowing through it.
An inductor is a passive electrical component that stores energy in a magnetic field when a current flows through it. In an AC circuit, the direction of the current changes periodically, causing the magnetic field to expand and collapse, which induces an opposing voltage in the inductor. This opposing voltage opposes the current flow and creates a phase shift between the voltage and current in the circuit.
The opposition to current flow caused by an inductor is called inductive reactance and is measured in ohms. Inductive reactance is proportional to the frequency of the AC signal and the value of the inductance. A higher frequency or larger inductance will result in a higher inductive reactance. Inductive reactance is an important factor to consider when designing circuits that use inductors, such as power supplies and filters. By understanding the inductive reactance of the inductor and the other components in the circuit, engineers can design circuits with specific characteristics and performance.
Learn more about voltage here: brainly.com/question/32138874
#SPJ11
A worker moves a heavy load into a house with the aid of an inclined plane. If the plane has a length of 6.2 meters and a height of 1.7 meters, what is its ideal mechanical energy?
Answer:
The ideal mechanical energy (IME) of an inclined plane can be calculated using the formula:IME = m * g * hwhere m is the mass of the load, g is the acceleration due to gravity (approximately 9.8 m/s^2), and h is the height of the inclined plane.However, in this case, we are given the length and height of the inclined plane, but not the mass of the load. Therefore, it is not possible to calculate the ideal mechanical energy without knowing the mass of the load.The ideal mechanical energy depends on the mass of the load and is given by the product of the mass, acceleration due to gravity, and the height of the inclined plane.
Explanation:
How can you protect a metacharacter (such as the $ character) from shell interpretation?
a. Precede it with a /.
b. Follow it with a \.
c. Precede it with a $.
d. It cannot be done because metacharacters are essential.
e. Precede it with a \.
Precede it with a \. This is the most commonly used method for protecting metacharacters from shell interpretation.so correct answer is CC
Metacharacters are special characters that have a specific meaning in shell interpretation. For example, the $ character is a metacharacter that is used to represent variables in shell scripting. However, there may be cases where you want to use a metacharacter as a literal character without its special meaning in shell interpretation. In such cases, you can protect the metacharacter from shell interpretation by using one of the following methods:
1. Precede it with a \: This method involves placing a backslash (\) character before the metacharacter that you want to protect. For example, if you want to use the $ character as a literal character, you can precede it with a \ like this: \$.
2. Precede it with a $: This method involves placing a $ character before the metacharacter that you want to protect. However, this method only works for protecting the $ character itself. For example, if you want to use the $ character as a literal character, you can precede it with a $ like this: $$.
3. Follow it with a \: This method involves placing a backslash (\) character after the metacharacter that you want to protect. However, this method is not commonly used for protecting metacharacters.
To know more about metacharacters visit:
brainly.com/question/14506622
#SPJ11
One kilogram of air in a piston–cylinder assembly undergoes a
thermodynamic cycle consisting of three processes.
Process 1–2: Constant specific volume
Process 2–3: Constant-temperature expansion
Process 3–1: Constant-pressure compression
At state 1, the temperature is 300 K, and the pressure is 1 bar. At state 2, the pressure is 2 bars. Employing the ideal gas
equation of state,
(a) sketch the cycle on p–v coordinates.
(b) determine the temperature at state 2, in K.
(c) determine the specific volume at state 3, in m3/kg.
For an ideal gas under constant volume, T2/T1 = P2/P1. the value of T2 = 600k.
How to solve(a) On p-v coordinates, draw an upward vertical line from 1 (1 bar, v1) to 2 (2 bar, v1) representing the constant volume process.
Draw a curved line from 2 to 3 (p3, v3) for the isothermal expansion, and a horizontal line from 3 back to 1 for the constant pressure compression.
(b) For an ideal gas under constant volume, T2/T1 = P2/P1.
Given T1=300K, P1=1 bar, P2=2 bar, T2 = (2/1)*300 = 600K.
(c) For constant temperature process, P2V2 = P3V3. Assuming ideal gas, V1=V2, then V3 = P2/P3 * V2. We need the value of P3 to determine V3.
Read more about temperature here:
https://brainly.com/question/25677592
#SPJ1
use your turn signal at least ______ feet before making a turn or changing lanes.
Answer:
According to the National Highway Traffic Safety Administration, you should use your turn signal at least 100 feet before making a turn or changing lanes. This will give other drivers enough time to react and adjust their speed or position accordingly. It is also a good idea to check your mirrors and blind spots before you turn or change lanes.
Using your turn signal is one of the most important things you can do to be a safe driver. It lets other drivers know what you are going to do, so they can react accordingly and avoid accidents.
Explanation:
tech a says that all hybrid vehicles use the same transmission as a non-hybrid vehicle. tech b says that some hybrid transmissions have a small electric fluid pump for when the transmission is in idle/stop mode. who is correct?
Answer:
Tech B is correct. Some hybrid transmissions have a small electric fluid pump for when the transmission is in idle/stop mode, which improves fuel efficiency.
Make a graph showing the rate of bottled water increasing from 3.3 billion bottles in 1997 to 15 Billion bottles in 2002 (Assume the growth to be linear.) If the charted rate continued, how many bottles would be sold today? If manufactures produce 31.7 bottles per second for each billion used in a year, how many bottles need to be produced to meet the current demand? Please justify your response.
To meet the current demand of graph, manufacturers would need to produce approximately 640.34 billion bottles per year.
Here's a graph showing the rate of bottled water increasing from 3.3 billion bottles in 1997 to 15 billion bottles in 2002, assuming linear growth:
|
16.0 | . *
| .
| .
12.0 | . *
| .
| .
8.0 |*
|
|____________________________
1997 2002
The equation of the line is:
y = mx + b
where y is the number of bottles, x is the year, m is the slope, and b is the y-intercept. Using the two points (1997, 3.3) and (2002, 15), we can calculate the slope: m = (15 - 3.3) / (2002 - 1997) = 2.34
And we can find the y-intercept by plugging in one of the points:
3.3 = 2.34 * 1997 + b
b = -4669.98
So the equation of the line is:
y = 2.34x - 4669.98
To find out how many bottles would be sold today, we need to know what year it is. Let's assume it's 2021. We can plug in x = 2021 and solve for y:
y = 2.34 * 2021 - 4669.98 = 20.2 billion bottles
So if the rate of growth continued, we would expect 20.2 billion bottles of water to be sold in 2021.
To find out how many bottles need to be produced to meet the current demand, we need to know the current rate of consumption. We know that the rate of consumption in 2002 was 15 billion bottles per year, and we know that manufacturers produce 31.7
bottles per second for each billion used in a year. So we can calculate the current rate of production needed as follows:
rate of production = 31.7 bottles/second/billion * 20.2 billion bottles/year
= 640.34 billion bottles/year
Therefore, to meet the current demand, manufacturers would need to produce approximately 640.34 billion bottles per year.
for similar questions on graph
https://brainly.com/question/30937748
#SPJ11
Many touchscreens have a(n) _______________ coating designed to repel the oils deposited by fingers that tap and swipe the screen.
Many touchscreens have an oleophobic coating designed to repel the oils deposited by fingers that tap and swipe the screen.
The oleophobic coating is a type of material that prevents fingerprints and smudges from sticking to the surface of the screen. This coating helps the touchscreen to remain clean and clear, enhancing the user's viewing experience. The coating does not last forever and may wear off over time due to constant use or exposure to external factors such as heat or moisture. In such cases, the user may notice an increase in fingerprint marks and smudges on the screen. In conclusion, the oleophobic coating on touchscreens is a useful feature that helps to maintain the cleanliness and clarity of the screen. However, it is important to note that this coating may wear off over time and may need to be reapplied or replaced to ensure the optimal performance of the touchscreen.
To know more about oleophobic coating visit:
brainly.com/question/2750661
#SPJ11
CdTe solar panels are becoming more popular because they are more efficient than Si solar panels. T/F
The statement given "CdTe solar panels are becoming more popular because they are more efficient than Si solar panels." is true because CdTe solar panels are indeed becoming more popular because they are more efficient than Si solar panels.
CdTe stands for Cadmium Telluride, which is a thin-film semiconductor material used to make solar panels. CdTe solar panels have been gaining popularity because they have higher efficiency levels than traditional Silicon (Si) solar panels. CdTe solar panels can convert more sunlight into electricity, making them more efficient. Additionally, CdTe solar panels are cheaper to manufacture and have a smaller carbon footprint than Si solar panels. This makes them a more cost-effective and environmentally friendly option.
You can learn more about solar energy at
https://brainly.com/question/17711999
#SPJ11
Which of the following address ranges is not listed in RFC 1918?
A. 10.0.0.0 to 10.255.255.255
B. 172.16.0.0 to 172.31.255.255
C. 172.16.0.0 to 172.63.255.255
D. 192.168.0.0 to 192.168.255.255
answer to the question is C. 172.16.0.0 to 172.63.255.255, which is not listed in RFC 1918. Although it falls within the 172.16/12 prefix, which is listed in RFC 1918, the range 172.32.0.0 to 172.63.255.255 is not reserved for private use and is therefore not included in the RFC.
RFC 1918 is a document that defines the private IPv4 address ranges that can be used within a network. These addresses are not routable over the internet and are used for internal network communication. The three ranges listed in RFC 1918 are:
- 10.0.0.0 to 10.255.255.255 (10/8 prefix)
- 172.16.0.0 to 172.31.255.255 (172.16/12 prefix)
- 192.168.0.0 to 192.168.255.255 (192.168/16 prefix)
In conclusion, it is important for network administrators to understand the private IPv4 address ranges defined in RFC 1918 in order to properly configure their networks and ensure that private addresses are not exposed to the public internet.
To know more about RFC visit:
brainly.com/question/12944214
#SPJ11
you should not back a tractor under a trailer until the whole air system is
You should not back a tractor under a trailer until the whole air system is fully charged and operating properly. This is because the air system is a crucial component of a tractor-trailer combination and is responsible for providing the necessary pressure to operate the brakes on both the tractor and trailer.
Without a properly functioning air system, the brakes may not work properly, which can result in a loss of control of the vehicle and potentially serious accidents.Before backing a tractor under a trailer, it is important to perform a pre-trip inspection to ensure that the air system is working properly. This involves checking the air pressure in the system, inspecting the hoses and connections for damage or leaks, and ensuring that the valves are properly aligned.Once the air system has been inspected and deemed to be in good working order, the tractor can be backed under the trailer. However, it is important to note that the process should be done slowly and carefully to ensure that the trailer is properly aligned with the tractor and that the air lines are properly connected.In conclusion, it is important to never back a tractor under a trailer until the whole air system is fully charged and operating properly. Performing a pre-trip inspection and taking the process slowly and carefully can help ensure a safe and successful backing procedure.
To know more about system visit:
brainly.com/question/29667751
#SPJ11
for fully developed laminar flow in a circular tube, what is a) the relationship between shear stress and channel radius b) relationship between shear stress and flow rate?
for fully developed laminar flow in a circular tube, the relationship between shear stress and channel radius is inverse, while the relationship between shear stress and flow rate is direct. These relationships can be described by the Hagen-Poiseuille equation and are important in understanding the behavior of fluids in confined spaces.
For fully developed laminar flow in a circular tube, the shear stress is related to the channel radius and flow rate by specific equations.
a) Relationship between shear stress and channel radius:
The shear stress in fully developed laminar flow in a circular tube is given by the Hagen-Poiseuille equation:
τ = (4μQ) / (πr^3)
where τ is the shear stress, μ is the dynamic viscosity of the fluid, Q is the volumetric flow rate, and r is the radius of the tube.
From the equation, it is clear that the shear stress is inversely proportional to the cube of the radius. This means that as the radius of the tube increases, the shear stress decreases. Therefore, for fully developed laminar flow in a circular tube, the relationship between shear stress and channel radius is inverse.
b) Relationship between shear stress and flow rate:
As mentioned earlier, the Hagen-Poiseuille equation gives the relationship between shear stress and flow rate. Rearranging the equation, we get:
Q = (πr^3τ) / (4μ)
From this equation, we can see that the flow rate is directly proportional to the shear stress. This means that as the shear stress increases, the flow rate also increases. Therefore, for fully developed laminar flow in a circular tube, the relationship between shear stress and flow rate is direct.
To know more about laminar visit:
brainly.com/question/31770578
#SPJ11
a vertically-held sledge hammer is easier to balance when the heavier end is
When holding a vertically-held sledgehammer, the heavier end will naturally move towards the ground due to gravity. Therefore, to balance the sledgehammer, it is easier to hold it with the heavier end closer to your hand.
This is because the weight of the hammer is distributed more evenly and the force of gravity is not pulling down on one end as strongly.If the heavier end of the sledgehammer is further away from your hand, it creates an imbalance that requires more effort to hold the hammer steady. This can be especially difficult when trying to use the sledgehammer to strike an object, as the weight imbalance can affect the accuracy and force of the strike.In summary, when holding a vertically-held sledgehammer, it is easier to balance it when the heavier end is closer to your hand. This distributes the weight more evenly and reduces the force of gravity pulling down on one end, making it easier to hold steady and use effectively. A vertically-held sledgehammer is easier to balance when the heavier end is at the top. This is because the center of mass is located closer to the point of support, which provides more stability and requires less effort to maintain balance. Additionally, having the heavier end at the top creates a larger moment of inertia, making it harder for the hammer to rotate and fall out of balance.
To know more about sledgehammer visit:
brainly.com/question/22267970
#SPJ11
What should be the water condition for boiler?
water condition for a boiler is crucial to its performance and longevity. Proper water treatment and maintenance are essential to ensure that the boiler operates efficiently and safely. Regular monitoring of water quality, pH levels, TDS, oxygen content, and temperature is necessary to maintain optimal conditions for the boiler.
The water condition for a boiler is an essential factor to consider as it affects the efficiency, safety, and lifespan of the boiler. The following are some key factors to keep in mind when considering the water condition for a boiler:
1. Water Quality: The quality of the water used in a boiler is critical to its performance. Poor quality water can lead to scale buildup, corrosion, and even boiler failure. Therefore, the water used in a boiler must meet certain standards. This can be achieved by using treated water, such as deionized or demineralized water, or by using a water treatment system that removes impurities.
2. pH Levels: The pH level of the water in a boiler is crucial as it affects the corrosion rate of the metal. Ideally, the pH should be between 8.5 and 9.5 for steel boilers and between 7 and 9 for copper-based boilers. A pH level that is too low can cause corrosion, while a pH level that is too high can cause scale buildup.
3. Total Dissolved Solids (TDS): TDS refers to the amount of dissolved minerals in the water. High TDS levels can cause scale buildup and reduce the efficiency of the boiler. Therefore, it is essential to monitor TDS levels regularly and remove excess minerals using a blowdown system.
4. Oxygen Content: Oxygen in the water can cause corrosion and damage to the boiler. Therefore, it is essential to remove excess oxygen using a deaerator or other oxygen removal system.
5. Temperature: The temperature of the water in a boiler should be maintained at the appropriate level to prevent overheating and damage to the boiler. The temperature should be monitored regularly and adjusted as necessary.
To know more about water visit:
brainly.com/question/31844495
#SPJ11
what is the sum_range argument of: =sumif(a2:a64,"green",c2:c64)?
The sum_range argument (C2:C64) in your formula refers to the range of cells that will be summed, but only for those cells where the corresponding cell in the range (A2:A64) meets the specified criterion ("green").
The SUMIF function in Excel is used to sum a range of cells that meet a certain criterion. It takes three arguments: range, criteria, and sum_range. The sum_range argument in the formula =SUMIF(A2:A64,"green",C2:C64) refers to the range of cells that the function will sum if the criteria are met. In this case, the criteria are "green," and the function will only sum the cells in the sum_range (C2:C64) that correspond to cells in the range (A2:A64) that contain the word "green."
In conclusion, the sum_range argument in the SUMIF function is an important part of the formula that determines which cells will be summed if the criteria are met. It is a versatile tool that can be used in a variety of ways to analyze data in Excel.
To learn more about sum_range, visit:
https://brainly.com/question/14885843
#SPJ11
the motor effect is at its strongest when the magnetic field and the conductor are at
The motor effect is strongest when the magnetic field and conductor are perpendicular to each other. In this orientation, the Lorentz force, which is responsible for the motor effect, is at its maximum.
The motor effect, also known as the Lorentz force, is the phenomenon in which a conductor carrying current experiences a force when placed in a magnetic field. This force is perpendicular to both the direction of the current and the magnetic field. The magnitude of this force is given by the equation F = BIL, where F is the force, B is the magnetic field strength, I is the current, and L is the length of the conductor within the magnetic field.
The orientation of the magnetic field and conductor can affect the strength of the motor effect. When the magnetic field and conductor are parallel, the force experienced by the conductor is zero. This is because the force is perpendicular to both the magnetic field and the current, and in this orientation, the two are parallel. Similarly, when the magnetic field and conductor are anti-parallel, the force experienced by the conductor is also zero.
The motor effect is strongest when the magnetic field and conductor are perpendicular to each other. In this orientation, the force experienced by the conductor is at its maximum. This is because the force is perpendicular to both the magnetic field and the current, and the two are at a 90-degree angle to each other. In practical terms, this means that motors are designed with the magnetic field and conductors arranged so that they are perpendicular to each other to maximize the strength of the motor effect.
Learn more about strength here: brainly.com/question/32144819
#SPJ11
while discussing regenerative braking, technician a says the regenerative system can completely stop the vehicle in order to generate a maximum amount of electricity. technician b says that because most hybrids are fwd vehicles, the rear wheels are designed to claim the most kinetic energy. who is correct?
Regenerative braking is a technology used in hybrid and electric vehicles that allows them to capture kinetic energy from the vehicle's motion and convert it into electricity to recharge the battery.
In regards to the question, technician A says that the regenerative system can completely stop the vehicle to generate a maximum amount of electricity. This statement is not entirely accurate as regenerative braking is not designed to completely stop the vehicle but rather to slow it down by converting kinetic energy into electrical energy. However, it is true that regenerative braking can generate a significant amount of electricity and reduce the wear and tear on the vehicle's brake pads. On the other hand, technician B says that the rear wheels are designed to claim the most kinetic energy because most hybrids are front-wheel drive vehicles. This statement is also not entirely accurate as the design of the regenerative braking system depends on the specific make and model of the hybrid vehicle. However, it is true that the rear wheels can often provide more kinetic energy due to the weight distribution of the vehicle.
Therefore, neither technician A nor technician B is entirely correct in their statements. While regenerative braking can generate a significant amount of electricity and reduce wear and tear on the brake pads, it is not designed to completely stop the vehicle. Additionally, while the rear wheels can often provide more kinetic energy, the design of the regenerative braking system depends on the specific make and model of the hybrid vehicle.
To learn more about Regenerative braking, visit:
https://brainly.com/question/31035015
#SPJ11
the use of microfilm and microfiche provides all of the following advantages except ____.
The use of microfilm and microfiche provides all of the following advantages except c. they can be read without a reader.
What are some advantages of microfilm ?One notable advantage is their space-saving nature, as microfilm and microfiche condense a substantial volume of documents into a compact format, thereby optimizing storage capacity.
Accessibility is another crucial facet where microfilm and microfiche shine. Moreover, these microforms excel in preserving documents over extended periods, as they exhibit resilience against deterioration and can withstand varying environmental conditions, ensuring the longevity of valuable information.
Find out more on microfilm at https://brainly.com/question/27787694
#SPJ4
Options include:
a. they are inexpensive
b. they have the longest life of any storage media
c. they can be read without a reader
d. they greatly reduce the amount of paper firms must handle
An important asset of a Scrum Team _________________________, to manage their own work and themselves, which includes internal conflicts.
An important asset of a Scrum Team is their ability to be self-organizing. This means that the team is able to manage their own work and themselves, which includes internal conflicts. Self-organizing teams are a key component of the Scrum framework, as they are responsible for delivering the product increment at the end of each sprint.
Being self-organizing means that the team has the autonomy to decide how to approach their work, prioritize tasks, and collaborate effectively. This level of autonomy is enabled by the Scrum framework, which provides a clear set of roles, events, and artifacts that guide the team's work. The Scrum Master facilitates the team's self-organization by coaching them on agile practices, helping them identify and remove obstacles, and fostering a culture of continuous improvement.One of the benefits of a self-organizing team is that they are able to address internal conflicts on their own. When conflicts arise, team members are empowered to resolve them collaboratively, without the need for external intervention. This fosters a sense of ownership and accountability within the team, which ultimately leads to better performance and results.In summary, the ability of a Scrum Team to be self-organizing is a critical asset that allows them to manage their own work and themselves, including internal conflicts. This autonomy is enabled by the Scrum framework, which provides a clear set of guidelines and practices that enable the team to work collaboratively and effectively. By fostering a culture of self-organization and collaboration, Scrum Teams are able to deliver high-quality products that meet the needs of their customers.
To know more about Scrum visit:
brainly.com/question/30176516
#SPJ11
According to the EPA, at what level does radon become a health concern requiring mitigation?
A. 1.4 picocuries per liter of air
B. 2.4 picocuries per liter of air
C. 4.0 picocuries per liter of air
D. .04 picocuries per liter of air
According to the EPA, the level at which radon becomes a health concern requiring mitigation is 4.0 picocuries per liter of air. The Option C.
At what level does radon become a health concern?Radon is a naturally occurring radioactive gas that can seep into homes and buildings through cracks in the foundation. Prolonged exposure to high levels of radon can increase the risk of developing lung cancer.
The EPA has set a recommended action level of 4.0 picocuries per liter of air. When radon levels exceed this threshold, it is considered a health concern and mitigation measures should be taken to reduce radon concentrations.
Read more about radon
brainly.com/question/13928450
#SPJ4
The ______________ sets the objective that the Sprint should achieve although it can be influenced by the Scrum Team.
The Sprint Goal sets the objective that the Sprint should achieve although it can be influenced by the Scrum Team. The Sprint Goal is a clear, concise statement that describes the purpose of the Sprint and what the Scrum Team plans to accomplish during the Sprint.
It serves as a guide for the development team and helps them stay focused on what needs to be done. The Sprint Goal is defined during the Sprint Planning meeting and is based on the Product Backlog items selected for the Sprint.The Sprint Goal is an important part of the Scrum framework as it provides a shared understanding of what the team is working towards and why. It helps the team prioritize their work and ensures that everyone is working towards the same objective. The Sprint Goal is also used as a tool to measure progress during the Sprint. The team can evaluate whether they are on track to achieve the goal and make adjustments if necessary.Although the Sprint Goal is set by the Product Owner, the Scrum Team has the ability to influence it. During the Sprint Planning meeting, the team collaborates with the Product Owner to select the Product Backlog items that will be included in the Sprint. The team can provide input on the feasibility of certain items and suggest alternative solutions. This input can influence the Sprint Goal and help ensure that it is achievable within the Sprint timeframe.
To know more about Sprint visit:
brainly.com/question/14582692
#SPJ11
During the Sprint the Scrum Team determines that cannot complete its work by the end of the Sprint. What happens in this case?
In Scrum methodology, each Sprint has a set duration, and the Scrum Team commits to completing a set of user stories or tasks during that period. However, there may be instances when the team realizes that they cannot complete all the work by the end of the Sprint. This situation is known as an incomplete Sprint or an unmet Sprint goal.
When the Scrum Team determines that they cannot complete their work within the Sprint, they should immediately notify the Product Owner. The Product Owner then reviews the progress made so far and collaborates with the Scrum Team to determine the next steps. In such cases, the Product Owner has the following options:
1. Cancel the Sprint: If the Product Owner determines that the Sprint goal is no longer achievable, they can choose to cancel the Sprint. Cancelling a Sprint means that all the work done during the Sprint is discarded, and the team starts afresh in the next Sprint.
2. Adjust the Sprint Goal: If the Sprint goal is still relevant and achievable but cannot be completed in the current time-box, the Product Owner may choose to adjust the Sprint goal and continue with the current Sprint. The Scrum Team then re-prioritizes the remaining work based on the new Sprint goal and continues working.
3. Extend the Sprint: In some cases, it may be feasible to extend the current Sprint and give the Scrum Team more time to complete their work. However, this option should only be considered after careful consideration of the impact on the release plan, stakeholder expectations, and the team's capacity to continue working.
To know more about Team visit:
brainly.com/question/30453784
#SPJ11
âSQL Server uses an extended version of SQL called T-SQL or Transact-SQL. True False.
True. SQL Server uses an extended version of SQL called T-SQL or Transact-SQL.
T-SQL or Transact-SQL is a powerful extension of the SQL (Structured Query Language) used by Microsoft's SQL Server database management system. T-SQL includes additional features such as transaction control, error handling, and stored procedures, which make it more robust than standard SQL. T-SQL is used to create and manage databases in SQL Server, and it provides advanced programming features that allow for complex data manipulation, querying, and data modification. Some of the advanced features of T-SQL include support for triggers, user-defined functions, and Common Table Expressions (CTEs). Overall, T-SQL is a crucial component of SQL Server, and it provides users with a powerful and flexible tool for managing databases and processing data. Its advanced features and capabilities make it a popular choice for businesses and organizations that require a high degree of control over their databases and data processing.
Learn more about business here: brainly.com/question/32141006
#SPJ11
which of the following is the most likely side effect of a high-protein, low-carbohydrate diet?
A. Diarrhea
B. Increased thirst
C. Nitrogen toxicity
D. Increased water retention in the body
E. Weight gain
The most likely side effect of a high-protein, low-carbohydrate diet is
D. Increased water retention in the body
Effects of high amounts of proteinWhen you consume high amounts of protein your body breaks it down into amino acids
During this process nitrogen is released as a waste product Excess nitrogen can be harmful to the body and the kidneys have to work harder to eliminate it.
However a high-protein diet is not likely to cause nitrogen toxicity as the body can handle moderate amounts of protein without any problems
Learn more about high-protein at
https://brainly.com/question/30821457
#SPJ1
impulse turbine: force applied to brakes to control turbine speed can be measured within 5% accuracy question 3 options: true false
True. In an impulse turbine, force is applied to the brakes to control the turbine speed.
The accuracy of measuring this force can be within 5%. The impulse turbine's functionality relies on converting the kinetic energy of steam or gas into mechanical energy by allowing it to flow through a series of nozzle-shaped blades. Controlling the turbine speed is crucial for its efficient operation, and applying force to the brakes is an effective way to achieve this. In conclusion, it is true that the force applied to the brakes to control the turbine speed in an impulse turbine can be measured with an accuracy of up to 5%.
To know more about mechanical energy visit:
brainly.com/question/29509191
#SPJ11
emissions from cars contribute to what fraction of all greenhouse gas emissions? 1% 10% 50% 99%
Emissions from cars contribute to approximately 17% of all greenhouse gas emissions.
Greenhouse gases, such as carbon dioxide, methane, and nitrous oxide, trap heat in the Earth's atmosphere and contribute to global warming. While emissions from cars are a significant contributor to greenhouse gas emissions, they are not the largest source. According to the Environmental Protection Agency (EPA), in the United States, transportation accounts for approximately 29% of greenhouse gas emissions, with cars and light trucks making up the largest share of this at 17%.
Other significant sources of greenhouse gas emissions include electricity production, which accounts for 27% of emissions, and industry, which accounts for 22%. Agriculture and forestry, commercial and residential buildings, and waste management also contribute to greenhouse gas emissions.
Reducing emissions from cars is important in addressing climate change, but it is just one piece of the puzzle. Efforts to reduce greenhouse gas emissions must also address other sources, such as electricity production and industry, as well as focus on increasing energy efficiency and transitioning to cleaner sources of energy.
Overall, while emissions from cars contribute significantly to greenhouse gas emissions, they are just one part of a larger issue that requires comprehensive solutions to effectively address climate change.
To learn more about emissions, click here: brainly.com/question/30701001
#SPJ11
A welding transformer's low side has two turns and delivers 300 amps. How much current travels through the high voltage side if it has 30 turns?
The welding transformer is an example of a step-down transformer because it has fewer turns on the low-voltage side than on the high-voltage side.
The current on the high-voltage side can be calculated using the formula:I(high voltage) = I(low voltage) * N(low voltage) / N(high voltage) where I is the current and N is the number of turns. Substituting the given values, we get: I(high voltage) = 300 A * 2 / 30 = 20 A Therefore, the current on the high voltage side of the welding transformer is 20 amps.A welding transformer's low side has two turns and delivers 300 amps. How much current travels through the high voltage side if it has 30 turns.
To know more about transformer click the link below:
brainly.com/question/31132745
#SPJ11
A rigid vessel is filled with a fluid from a source whose properties remain constant. The vessel is filled such that the specific entropy of the vessel contents remains constant. Identify the correct statement for the entropy change of the surroundings.
Multiple Choice
a The entropy of the surroundings can only increase or remain fixed.
b The entropy of the surroundings can only remain fixed.
c The entropy of the surroundings can only increase.
correct statement for the entropy change of the surroundings is option c: the entropy of the surroundings can only increase.
In this scenario, the specific entropy of the vessel contents is remaining constant, which means that there is no change in entropy within the vessel. However, the process of filling the vessel with fluid will result in a change in the surroundings.The correct statement for the entropy change of the surroundings can be determined by considering the second law of thermodynamics, which states that the total entropy of a closed system (including the surroundings) always increases over time.Option a states that the entropy of the surroundings can only increase or remain fixed. This is consistent with the second law of thermodynamics, as the process of filling the vessel with fluid will result in an increase in entropy in the surroundings due to the transfer of heat and work between the system and surroundings.Option b states that the entropy of the surroundings can only remain fixed. This is not consistent with the second law of thermodynamics, as the process of filling the vessel with fluid will result in an increase in entropy in the surroundings.Option c states that the entropy of the surroundings can only increase. This is consistent with the second law of thermodynamics, as the process of filling the vessel with fluid will result in an increase in entropy in the surroundings.
To know more about entropy visit:
brainly.com/question/28244712
#SPJ11
