Which statement corresponds to a reaction that has ΔH > 0 and ΔS > 0?
a The reaction is spontaneous at all temperatures.
b The reaction is spontaneous at low temperatures.
c The reaction is nonspontaneous at all temperatures.
d The reaction is spontaneous at high temperatures.

The concentration of [tex]2H_3PO_4[/tex] remaining after 5.20 seconds is approximately 0.254 M, the correct option is A.

To determine how much [tex]2H_3PO_4[/tex] is left after 5.20 seconds, we can use the integrated rate equation for a second-order reaction:

1/[A]t - 1/[A]0 = kt,

where;

[A]t = concentration of [tex]2H_3PO_4[/tex] at time t

[tex][A]_0[/tex] = initial concentration

k = rate constant

t = time elapsed.

Substituting the given values:

1/[A]t - 1/1.02 = (0.566 [tex]M^{-1}s^{-1}[/tex]) × 5.20 s,

Simplifying the equation:

1/[A]t = 1/1.02 + (0.566 [tex]M^{-1}s^{-1}[/tex]) × 5.20 s,

Calculating the right side:

1/[A]t = 0.9804 [tex]M^{-1}[/tex] + 2.9452 [tex]M^{-1}[/tex],

1/[A]t = 3.9256 [tex]M^{-1}[/tex].

Taking the reciprocal of both sides:

[A]t = 1 / (3.9256 [tex]M^{-1[/tex]),

[A]t = 0.254 M.

Thus, the correct option is A.

To learn more about concentration follow the link:

https://brainly.com/question/3045247

#SPJ4

The complete question is:

The following reaction follows second-order kinetics with a rate constant of 0.566 [tex]M^{-1}s^{-1}[/tex]. Suppose a vessel initially contains [tex]2H_3PO_4[/tex] at a concentration of 1.02 m. How much is left 5.20 seconds later?

[tex]2H_3PO_4[/tex] → [tex]P_2O_5+ 3H_2O[/tex]

(group of answer choices)

A. 0.25 M

B. 0.51 M

C. 0.56 M

D. 0.91 M

The covalent bond between an amino acid and its tRNA is a specific type of covalent bond called an ester linkage.

The covalent bond between an amino acid and its tRNA is formed through a specific type of covalent bond called an ester linkage. This linkage is formed between the carboxyl group of the amino acid and the 3' hydroxyl group of the tRNA.

The process of forming this bond is called aminoacylation, and it is catalyzed by an enzyme called aminoacyl-tRNA synthetase.

Each amino acid has a specific aminoacyl-tRNA synthetase enzyme that catalyzes the formation of the ester bond between the amino acid and the tRNA molecule with the corresponding anticodon.

Once the amino acid is attached to the tRNA, the resulting aminoacyl-tRNA can then be used in protein synthesis, where the tRNA delivers the amino acid to the ribosome and the amino acid is incorporated into the growing polypeptide chain.

Therefore, the correct answer is an ester linkage, which is formed between the carboxyl group of the amino acid and the 3' hydroxyl group of the tRNA during the process of aminoacylation.

Visit here to learn more about protein:

brainly.com/question/884935

#SPJ11

On 10-fold dilution of a strong acid, the pH will increase by one unit.

This is because dilution of an acidic solution with water leads to a decrease in the concentration of hydrogen ions (H+) in the solution, and an increase in the concentration of hydroxide ions (OH-). The pH of a solution is a measure of the concentration of H+ ions present in the solution. When an acidic solution is diluted, the concentration of H+ ions decreases, leading to an increase in pH. Since pH is defined as the negative logarithm of the hydrogen ion concentration, a 10-fold dilution will lead to a decrease in H+ ion concentration by a factor of 10, resulting in an increase in pH by one unit. This relationship between pH and dilution is important in various scientific and industrial applications, such as in the preparation of buffers and in the treatment of acidic wastewater.

To learn more about solution click here: brainly.com/question/1616939

#SPJ11

Explanation:

Plugging into the following equations will give you the answer (the answer is the attached image):

[tex]pH+pOH=14[/tex]

[tex]pH=-log_{10}([H^+])[/tex]

[tex]pOH=-log_{10}([OH^-])[/tex]

[tex][H^+][OH^-]=10^{-14}[/tex]

[tex][H^+]=10^{-pH}[/tex]

[tex][OH^-]=10^{-pOH}[/tex]

A mixed solvent of EtOH and water is used in recrystallization to improve solubility and selectivity, resulting in better product purity and yield.

A mixed solvent system of EtOH and water is preferred over a single solvent system of water or ethanol in recrystallization because it can improve solubility and selectivity, leading to better product purity and yield. EtOH is a good solvent for organic compounds, while water is a good solvent for polar compounds.

When these two solvents are mixed, they can dissolve a wider range of compounds than either solvent alone. Additionally, the ratio of EtOH to water can be adjusted to fine-tune the solubility and selectivity of the mixed solvent system. This allows for better control over the recrystallization process, resulting in higher-quality products.

In summary, the use of a mixed solvent system in recrystallization can enhance the efficiency and effectiveness of the process, ultimately leading to improved product quality.

Learn more about recrystallization here:

https://brainly.com/question/29215760

#SPJ11

Answer:

answer is a

Explanation:

I just did that question

The moles of the gas that were added to the balloon with the final volume was 7.2 l is 9.5 moles.

The initial number of moles of the balloon, n₁ = 2.3 mol

The initial volume of the gas, V₁ = 1.4 L

The final volume of the gas, V₂ = 7.2 L

The relationship in between the volume and the number of moles is :

V₁ / n₁ = V₂ / n₂

1.4 / 2.3 = 7.2 / n₂

n₂ = 11.8 mol

The added number of the moles of the gas is :

n = n₂  - n₁

n = 11.8 - 2.3

n = 9.5 mol

The amount of the moles that were added to the balloon is the 9.5 mol.

To learn more about moles here

https://brainly.com/question/30885025

#SPJ4

There are 6 moles of O-atoms in 126 amu of HNO3.

To find the number of moles of O-atoms in 126 amu of HNO3, we need to first calculate the number of moles of HNO3 in 126 amu and then multiply it by the number of O-atoms per molecule of HNO3.

The molecular weight of HNO3 is 63 g/mol (1+14+48=63), which means that 1 mole of HNO3 has a mass of 63 g. To find the number of moles of HNO3 in 126 amu, we divide 126 by the molar mass of HNO3:

126 amu / 63 g/mol = 2 moles

So, there are 2 moles of HNO3 in 126 amu.

Each molecule of HNO3 contains 3 O-atoms, so the total number of O-atoms in 2 moles of HNO3 is:

2 moles x 3 O-atoms/mole = 6 moles of O-atoms

For more such questions on moles

https://brainly.com/question/29367909

#SPJ11

The balanced nuclear equation for the alpha decay of polonium-218 to give lead-214 is,

[tex]^218Po[/tex] -> [tex]^214Pb[/tex] + [tex]^4He[/tex]

In the given nuclear equation, the nuclide polonium-218 (symbolized as [tex]^218Po[/tex]) undergoes alpha emission, which means it releases an alpha particle. An alpha particle consists of two protons and two neutrons, which is symbolized as [tex]^4He[/tex].

After the alpha emission, the resulting nuclide is lead-214 (symbolized as [tex]^214Pb[/tex]). Lead-214 is formed by subtracting the alpha particle ([tex]^4He[/tex]) from the original polonium-218 nucleus.

Overall, the nuclear equation represents the radioactive decay process where polonium-218 emits an alpha particle, resulting in the formation of lead-214.

Learn more about nuclear equation

brainly.com/question/29863580

#SPJ11

40.5 g of N2 occupies 32.7 L at STP. The correct answer is (C) 32.4 L.

We can use the ideal gas law to solve this problem:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.

At STP, the pressure is 1 atm and the temperature is 273.15 K. The ideal gas constant is 0.08206 L·atm/(mol·K). We can calculate the number of moles of N2 using its molar mass, which is 28.02 g/mol:

n(N2) = 40.5 g / 28.02 g/mol = 1.446 mol

Substituting these values into the ideal gas law equation:

V = nRT / P = (1.446 mol)(0.08206 L·atm/(mol·K))(273.15 K) / 1 atm = 32.7 L

Therefore, 40.5 g of N2 occupies 32.7 L at STP.

The correct answer is (C) 32.4 L.

Learn more about occupies here:

https://brainly.com/question/223894

#SPJ11

First, we need to calculate the moles of naphthalene and benzene in the solution:

Molar mass of naphthalene (C10H8) = 128.17 g/mol

Moles of naphthalene = 10.6 g / 128.17 g/mol = 0.0827 mol

Density of benzene = 0.877 g/cm3 = 0.877 g/mL

Volume of benzene = 114.0 mL

Mass of benzene = Density x Volume = 0.877 g/mL x 114.0 mL = 99.9 g

Molar mass of benzene = 78.11 g/mol

Moles of benzene = 99.9 g / 78.11 g/mol = 1.28 mol

Next, we can use the freezing point depression equation and boiling point elevation equation to calculate the respective temperature changes:

ΔTf = Kf x molality

molality = moles of solute / mass of solvent (in kg)

molality = 0.0827 mol / 0.0999 kg = 0.827 m

ΔTf = 5.12°C/m x 0.827 m = 4.23°C

Freezing point of solution = freezing point of pure benzene - ΔTf = 5.5°C - 4.23°C = 1.27°C

ΔTb = Kb x molality

ΔTb = 2.53°C/m x 0.827 m = 2.09°C

Boiling point of solution = boiling point of pure benzene + ΔTb = 80.1°C + 2.09°C = 82.19°C

Therefore, the freezing point of the solution is 1.27°C and the boiling point is 82.19°C.

To learn more about solution click here: brainly.com/question/1616939

#SPJ11

False. The net number of spheres in the face-centered cubic (FCC) unit cell is not 4. In fact, the FCC unit cell consists of a total of 14 spheres.

In the face-centered cubic structure, each corner of the unit cell contains a sphere, and there are eight corners in total. Since each corner is shared by eight adjacent unit cells, the contribution of each corner to the net number of spheres is 1/8. Therefore, the total contribution from the corners is 8 * (1/8) = 1. Additionally, each face of the FCC unit cell also contains a sphere located at its center. There are six faces in total, and each face contributes 1 sphere. So the total contribution from the faces is 6. Combining the contributions from the corners and faces, we have 1 (from corners) + 6 (from faces) = 7. However, since the unit cell is three-dimensional, we need to account for the spheres within the unit cell itself. The center sphere is not shared with any neighboring unit cells, so it counts as a full sphere. Therefore, the total number of spheres in the FCC unit cell is 7 + 1 = 8. In summary, the net number of spheres in the face-centered cubic unit cell is 8, not 4.

learn more about face-centered cubic here: brainly.com/question/15634707

#SPJ11

The average atomic mass of this element is 12.0107 amu.Therefore, the average atomic mass of this element is 12.0107 amu.

To find the average atomic mass, we need to take into account the abundance and mass of each isotope. We can use the following formula:

Average atomic mass = (abundance of isotope 1 x mass of isotope 1) + (abundance of isotope 2 x mass of isotope 2)

Plugging in the values given in the question, we get:

Average atomic mass = (0.0107 x 13) + (0.9893 x 12)
Average atomic mass = 0.1391 + 11.8716
Average atomic mass = 12.0107 amu

Therefore, the average atomic mass of this element is 12.0107 amu.

To calculate the average atomic mass of an element with two stable isotopes, you need to multiply the mass of each isotope by its abundance (in decimal form) and then add the results together. Here's the calculation:

Isotope 1: 13 amu * 0.0107 = 0.1391
Isotope 2: 12 amu * 0.9893 = 11.8716

Average atomic mass = 0.1391 + 11.8716 = 12.0107 amu

So, the average atomic mass of this element is 12.0107 amu.

Visit here to learn more about  atomic mass :  https://brainly.com/question/29117302
#SPJ11

Fe3O4 contains 72.4% iron by mass.The formula of the oxide of iron is Fe3O4, which means it contains 3 atoms of iron and 4 atoms of oxygen.

To calculate the mass percent of iron in Fe3O4, we need to first determine the molar mass of Fe3O4:

Molar mass of Fe3O4 = (3 x molar mass of Fe) + (4 x molar mass of O)

= (3 x 55.845 g/mol) + (4 x 15.9994 g/mol)

= 231.5332 g/mol

Next, we need to determine the mass of iron in one mole of Fe3O4:

Mass of iron in one mole of Fe3O4 = 3 x molar mass of Fe

= 3 x 55.845 g/mol

= 167.535 g/mol

Finally, we can calculate the mass percent of iron in Fe3O4:

Mass percent of iron = (mass of iron ÷ total mass of Fe3O4) x 100%

= (167.535 g/mol ÷ 231.5332 g/mol) x 100%

= 72.4%

Therefore, Fe3O4 contains 72.4% iron by mass.

Learn more about oxide here:

https://brainly.com/question/376562

#SPJ11

When heated, potassium permanganate (KMⁿO4) decomposes into:

Potassium permanganate is a strong oxidizing agent that decomposes when heated and releases oxygen gas. The reaction is observed by placing small amount of potassium permanganate in a test tube and gently heating it over a Bunsen burner.

As the temperature increases, the purple color of the potassium permanganate fades and brown-black manganese dioxide is formed. Oxygen gas can be seen bubbling out of the test tube and can be confirmed with a glowing splint test.

After the reaction is complete, the residue left in the test tube is potassium manganate which can be identified by its green color.

Read more about potassium permanganate

brainly.com/question/29555671

#SPJ1

The process in which a nucleus spontaneously breaks down by emitting radiation is known as radioactive decay.

During this process, the unstable nucleus emits radiation in the form of alpha particles, beta particles, or gamma rays until it becomes stable. Radioactive decay is a random process and occurs at a specific rate, known as the half-life, which varies for each radioactive substance.

This process is used in many applications, including carbon dating and medical imaging. It is important to note that fusion and transformation are not related to radioactive decay, as they refer to the process of combining two nuclei to form a heavier nucleus and the process of changing one element into another, respectively. Answering more than 100 words, we can say that radioactive decay is a fundamental process that helps us understand the behavior of atoms and how they change over time.

To know more about radioactive decay visit:

https://brainly.com/question/30416114

#SPJ11

To begin with, it is important to note that the speed at which a gas escapes through a pinhole is directly related to its molecular weight. The lighter the gas, the faster it will escape.

Therefore, if a gas made up of atoms is escaping 5.73 times faster than Xe gas, which has a molecular weight of 131.29 g/mol, then the gas in question must have a much lower molecular weight using this information, we can narrow down the potential gases to those with low molecular weights such as hydrogen (H2) with a molecular weight of 2.02 g/mol or helium (He) with a molecular weight of 4.00 g/mol. However, since the question mentions that the gas is made up of atoms, we can rule out hydrogen, which is a diatomic gas.

Therefore, the chemical formula of the gas in question is most likely He, which is made up of individual helium atoms and has a very low molecular weight of 4.00 g/mol. In summary, based on the given information, the gas that escapes 5.73 times faster than Xe gas is most likely helium, with the chemical formula He.

To know more about molecular weight visit:

https://brainly.com/question/30209542

#SPJ11

we need 56.11 grams of KOH to make 1.00 liter of a 1 molar solution of potassium hydroxide.

To make a 1 molar solution of potassium hydroxide (KOH), we need to dissolve enough KOH in water to make a solution where the concentration of KOH is 1 mole per liter of solution. The molarity (M) is defined as the number of moles of solute (KOH in this case) per liter of solution, so we can use this equation:

M = moles of solute / liters of solution

We can rearrange this equation to solve for the moles of solute:

moles of solute = M x liters of solution

Since we want to make 1.00 liter of a 1 molar solution of KOH, we can substitute those values into the equation:

moles of solute = 1.00 mol/L x 1.00 L = 1.00 mol

So we need 1.00 mole of KOH to make 1.00 liter of a 1 molar solution. To find the mass of KOH needed, we need to use its molar mass:

KOH molar mass = 39.10 g/mol (for K) + 16.00 g/mol (for O) + 1.01 g/mol (for H) = 56.11 g/mol

So, the mass of KOH needed to make 1.00 liter of a 1 molar solution is:

mass of KOH = moles of KOH x molar mass of KOH

= 1.00 mol x 56.11 g/mol

= 56.11 g

for more questions on solution

https://brainly.com/question/25326161

#SPJ11

The reaction mixture needs to be filtered while warm after reflux because the product may solidify and become difficult to filter if left to cool.


During reflux, the reaction mixture is heated to boiling and maintained at that temperature for a period of time. This process can cause the product to dissolve in the solvent and react with other components in the mixture. After reflux, the reaction mixture needs to be filtered to separate the solid product from the solvent and other components.  

Filtering the mixture while it is still warm prevents the product from solidifying and becoming difficult to filter. If left to cool, the product may form crystals that clog the filter and slow down or even stop the filtration process. By filtering the mixture while it is still warm, the product remains in a liquid state and is easier to separate from the rest of the mixture. This ensures that the product is obtained in the desired form and purity.

Learn more about reflux here:

https://brainly.com/question/30631338

#SPJ11

A dark ale that is sweet, strong, and hosts a malt flavor is known as a(n) b. stout.

Ale is a type of beer that is brewed using a warm fermentation method, typically at temperatures between 15-25°C (59-77°F). It is made with a type of yeast called Saccharomyces cerevisiae, which ferments at the top of the fermentation vessel and gives ale its characteristic fruity and floral notes.

Ales can range in color from light yellow to dark brown, and in flavor from light and refreshing to rich and complex. Some popular types of ales include pale ale, India pale ale (IPA), brown ale, and porter.

Ales are often served at cellar temperature (around 12-14°C or 54-57°F) and can be enjoyed on their own or paired with a variety of foods, such as cheese, grilled meats, and spicy dishes.

Visit here to learn more about beer brainly.com/question/17402817

#SPJ11

The solution that contains the 0.10 M sodium hydroxide and the 0.10 M sodium cyanide. The formula of the substance which will precipitates first is the Zn(OH)₂.

The chemical equation for the reaction of the zinc acetate with the solutions and with the solubility products is as :

Zn(C₂H₃O₂)₂   + 2KOH   --->  Zn(OH)₂  +  2KC₂H₃O₂

The ksp of the  Zn(OH)₂  = 1.2 × 10⁻¹⁷

Zn(C₂H₃O₂)₂   +  2NaCN  -->  Zn(CN)₂   +  2C₂H₃O₂Na

The ksp of the  Zn(OH)₂  = 2.6 × 10⁻¹³

The higher the value of the Ksp of the solute, then the more soluble the solute  in the solvent.

The Ksp value of the Zn(OH)₂ is less as compared to the Ksp of the Zn(CN)₂,  Therefore, the Zn(OH)₂ precipitates first.

To learn more about precipitates here

https://brainly.com/question/28562005

#SPJ4

The volume of a gas originally at standard temperature and pressure was recorded as 488.8 mL, the gas would occupy a volume of 5.97 mL at a pressure of 100.0 atm and temperature of -245.0 °C.

To solve this problem, we can use the combined gas law, which relates the pressure, volume, and temperature of a gas:

(P₁V₁)/T₁ = (P₂V₂)/T₂

where P₁, V₁, and T₁ are the initial pressure, volume, and temperature, respectively, and P₂, V₂, and T₂ are the final pressure, volume, and temperature, respectively.

We can first convert the initial temperature to Kelvin:

T₁ = 273.15 K (since it is at standard temperature)

Next, we can convert the final temperature to Kelvin:

T₂ = (-245.0 °C + 273.15) K = 28.15 K

We can then plug in the values and solve for V₂:

(1 atm x 488.8 mL) / 273.15 K = (100.0 atm x V₂) / 28.15 K

V₂ = (1 atm x 488.8 mL x 28.15 K) / (100.0 atm x 273.15 K) = 5.97 mL

Therefore, the gas would occupy a volume of 5.97 mL at a pressure of 100.0 atm and temperature of -245.0 °C.

For more details regarding volume, visit:

https://brainly.com/question/15861918

#SPJ1

The majority of valence electrons are negatively charged particles, and they are all grouped in various orbitals or shells. Additionally, these electrons are in charge of how atoms interact with one another and create chemical bonds.

An element is defined as the pure substance which consists of only one type of atom which all have the same numbers of protons in their nuclei. Elements are the simplest chemical forms which cannot be broken down through chemical reactions.

Here the element potassium has the atomic number 19 and its electronic configuration is 2, 8, 8, 1. It contains the four energy levels, they are 'K', 'L', 'M' and 'N'. The number of valence electrons in potassium is 1.

To know more about Potassium, visit;

https://brainly.com/question/4455382

#SPJ1

Your question is incomplete, most probably your full question was:

Which element has 1 valence electron and 4 energy levels?

Answer:

Out of the following properties, the least useful for identifying a sample of calcite would be its color. Calcite is a mineral that can be found in a variety of colors, including white, gray, black, brown, red, orange, yellow, green, and blue. This means that its color is not a reliable indicator of its identity.

Other properties that can be used to identify calcite include its hardness (3 on the Mohs scale), specific gravity (2.71), and cleavage (rhombohedral). Calcite is also a birefringent mineral, which means that it splits light into two rays of different polarization when viewed through a polarizing filter.

Explanation:

To convert -196°C to Fahrenheit, you can use the formula: F = (C x 1.8) + 32. Plugging in -196 for C, you get:

F = (-196 x 1.8) + 32
F = -320.8

Therefore, nitrogen boils at -320.8°F. It's important to note that Fahrenheit and Celsius scales have different zero points and different degrees of size. This means that -196°C is a much lower temperature than -320.8°F, as the Fahrenheit scale has a smaller degree of size. This conversion is useful for comparing temperatures across different measurement systems, and for understanding the temperature ranges of different substances and materials.

To learn more about temperature click here: brainly.com/question/15267055

#SPJ11

The molecules that can form hydrogen bonds with another identical molecule are HOOH (hydrogen peroxide), CH₃CH₂NH₂(ethylamine), and CH₃CH₂F (ethyl fluoride).                                                                  

Hydrogen bonding occurs between a hydrogen atom bonded to an electronegative atom (such as oxygen, nitrogen, or fluorine) and another electronegative atom in a different molecule. Based on this criterion, the molecules that can form hydrogen bonds with another identical molecule are:

Learn more about Hydrogen Bond

brainly.com/question/30885458

#SPJ4                                                                                            

The false statement about disulfide bond formation is (d) disulfide bonds form spontaneously within the ER because the lumen of the ER is oxidizing. Disulfide bonds do form within the ER, but not spontaneously.

Instead, they are formed by the action of enzymes called protein disulfide isomerases (PDIs). PDIs catalyze the oxidation of cysteine residues to form disulfide bonds. Disulfide bonding (b) stabilizes the structure of proteins, and (a) disulfide bonds do not form under reducing environments. Additionally, disulfide bonds do not (c) grow from both ends, the growth rate is faster at the plus ends. Instead, they are formed between two cysteine residues on the same polypeptide chain or between different polypeptide chains.

The false statement about disulfide bond formation among the given choices is (a) disulfide bonds do not form under reducing environments grow from both ends, the growth rate is faster at the plus ends. This statement is unrelated and incorrect. In reality, disulfide bonds (b) form by oxidation of cysteine pairs, (c) stabilize protein structures, and (d) form spontaneously within the ER due to its oxidizing environment. Disulfide bonds play a vital role in maintaining the proper folding and stability of proteins, especially those secreted or located in extracellular environments.

learn more about the bond here

https://brainly.com/question/31994049

#SPJ11

The pH of a 0.30 M solution of a weak base is 10.66. We can use this information to calculate the pOH of the solution, which is the negative logarithm of the hydroxide ion concentration. The pOH can then be used to calculate the pKb, which is the negative logarithm of the base dissociation constant, Kb. By taking the antilog of the pKb value, we can determine the value of Kb for the weak base.

To calculate the pOH of the solution, we use the equation: pOH = 14 - pH. Therefore, pOH = 14 - 10.66 = 3.34. Using the relationship between pOH and Kb, we have pKb = 14 - pOH = 10.66. Taking the antilog of pKb, we have Kb = 2.5 x 10^-4.

Therefore, the Kb of the weak base in the 0.30 M solution is 2.5 x 10^-4. This value indicates the strength of the base as a proton acceptor in solution. A higher value of Kb indicates a stronger base, which means it is more likely to accept a proton from water and generate hydroxide ions. The calculation of Kb is an essential step in understanding the properties of weak bases and their behavior in solution.

To learn more about solution click here: brainly.com/question/1616939

#SPJ11

The net charge on the 247 g piece of sulfur would be -1.84 x 10^13 elementary charges.

To solve this problem, we first need to calculate the number of sulfur atoms in the 247 g piece of sulfur:

number of sulfur atoms = (mass of sulfur / atomic mass of sulfur) x Avogadro's number

number of sulfur atoms = (247 g / 32.1 g/mol) x 6.022 x 10^23 atoms/mol

number of sulfur atoms = 1.84 x 10^25 atoms

Next, we need to determine how many atoms have an extra electron:

number of atoms with an extra electron = (1 / 1 x 10^12) x number of sulfur atoms

number of atoms with an extra electron = (1 x 10^12)^-1 x 1.84 x 10^25

number of atoms with an extra electron = 1.84 x 10^13 atoms

Each of these atoms with an extra electron has a net charge of -1, so the total net charge on the sulfur piece would be:

total net charge = -1 x number of atoms with an extra electron

total net charge = -1 x 1.84 x 10^13

total net charge = -1.84 x 10^13

Therefore, the net charge on the 247 g piece of sulfur would be -1.84 x 10^13 elementary charges.

Learn more about sulfur here:

https://brainly.com/question/14734819

#SPJ11