Large changes in stock price are not fully hedged in a delta-neutral portfolio is true among the statement . Option C is correct .
An exchanging approach for choices called delta supporting attempts to decrease or fence the directional gamble welcomed on by changes in the cost of the hidden resource. Options are used to offset the risk of a single other option holding or a portfolio of holdings in this strategy.
A portfolio system known as "delta unbiased" utilizes various possessions with an equilibrium of positive and negative deltas so the complete delta of the resources viable is zero. A delta-nonpartisan portfolio adjust the reaction to showcase variances for a particular reach, carrying the position's net change to nothing.
Learn more about portfolio :
brainly.com/question/30300038
#SPJ4
If the UK prime minister announces that the government are solidly on a course of deficit reduction, which should make the pound more attractive to investors, would such a deficit reduction in fact raise the value of the pound? Explain
if the UK prime minister announces that the government is solidly on a course of deficit reduction, this should make the pound more attractive to investors. As a result, such a deficit reduction would raise the value of the pound.A deficit refers to when a government spends more than it receives in revenue.
When the government reduces its deficit, it means that it is spending less than what it receives in revenue, which will lead to less borrowing and lower interest rates. This makes the economy more stable and less risky, and investors are therefore more likely to buy assets in the UK, such as bonds or stocks.
When there is more demand for a country's assets, the value of its currency typically increases as well.Therefore, if the UK prime minister announces that the government is solidly on a course of deficit reduction, investors will perceive this as a positive step towards economic stability, which will make the pound more attractive to them.
This increased demand for the pound will lead to an increase in its value. Overall, a reduction in the UK deficit should have a positive effect on the pound's value.
To know more about government visit:
https://brainly.com/question/4160287
#SPJ11
A market has 21 firms, 19 of which have 5% market share. The
remaining two have 1% and 4% market share. Calculate the HHI.
The market share of each firm in a market is utilized in the calculation of the Herfindahl-Hirschman Index (HHI). The HHI score is used to determine the level of competition in a market. It is calculated by squaring the market share of each firm in the market and adding up the resulting values.The formula for the HHI is as follows:HHI = ∑(Si)²Where:S = Market share of each firm in the market.
To calculate the HHI for the given market, we need to calculate the market share of the two firms that have 1% and 4% market share respectively. The 19 firms that have 5% market share are already provided, so we just need to add the two remaining firms.
To know more about market visit:
https://brainly.com/question/33204230
#SPJ11
Tok Dalang works for a nuclear research laboratory that is contemplating leasing a diagnostic scanner. The scanner costs RM5,800,000 and it would be depreciated straight line to zero over four years. Because of radiation contamination, it will be completely valueless in four years. Tok Dalang can lease it for RM1,740,000, payable at the beginning of each of the next four years. Assume that the tax rate is 30%. Tok Dalang can borrow at 8% before tax. Based on the above information, you are required to prepare the Cash Flows Analysis by showing clearly the Net Advantage of Leasing (NAL). Based on NAL, recommend to Tok Dalang whether he should lease or buy the scanner. (12 Marks)
Cash Flows Analysis
Year
Cost
Depreciation
Lease payment
Taxable Income
Tax shield
After-tax Lease Payment
Cash Flow
0
5,800,000
1,450,000
(5,800,000)
5,800,000
(1,740,000)
(1,218,000)
(2,668,000)
1
-
1,450,000
(1,740,000)
310,000
93,000
1,647,000
1,357,000
2
-
1,450,000
(1,740,000)
310,000
93,000
1,647,000
1,357,000
3
-
1,450,000
(1,740,000)
310,000
93,000
1,647,000
1,357,000
4
-
1,450,000
(1,740,000)
310,000
93,000
1,647,000
1,357,000
As it is observed from the above table, the net advantage of leasing (NAL) of the company in the four years is -RM 168,000. Thus, the leasing option is not preferred. The purchasing option is preferred instead.NAL = PV of cash flows (Leasing) - PV of cash flows (Buying)NPV = Leasing - BuyingLeasing = - RM 2,668,000Buying = - RM 2,500,000 (5,800,000 - 1,450,000) / (1 + 0.08)⁴) × (1 - 0.30)NPV = (- RM 2,668,000) - (- RM 2,472,581.80) = - RM 168,418.20Thus, based on the NAL, Tok Dalang should buy the scanner instead of leasing it.
To know more about visit
#SPJ11
Other than open market operations, what tools does the Federal Reserve use to manipulate interest rates in the economy? (Check all that apply.) O A. Lending from the discount window. B. Changing the reserve requirement. C. Changing the interest rate paid on reserves deposited at the Fed. D. Quantitative easing. E. Changing the magnitude of federal transfer payments.
Based on the options provided, the correct answers are A. Lending from the discount window, B. Changing the reserve requirement, C. Changing the interest rate paid on reserves deposited at the Fed, and D. Quantitative easing. Federal transfer payments (E) are not a direct tool used by the Federal Reserve to manipulate interest rates in the economy.
The Federal Reserve uses the following tools, in addition to open market operations, to manipulate interest rates in the economy:
A. Lending from the discount window: The Federal Reserve can adjust the discount rate, which is the interest rate at which commercial banks can borrow funds directly from the central bank. By changing the discount rate, the Federal Reserve can influence the cost of borrowing for banks and indirectly affect interest rates in the economy.
B. Changing the reserve requirement: The Federal Reserve sets reserve requirements, which determine the percentage of deposits that banks must hold as reserves. By increasing or decreasing the reserve requirement, the Federal Reserve can influence the amount of funds available for lending by banks, which can impact interest rates.
C. Changing the interest rate paid on reserves deposited at the Fed: The Federal Reserve can adjust the interest rate it pays on reserves held by banks at the central bank. By changing this rate, the Federal Reserve can incentivize banks to hold more or fewer reserves, which can affect the supply of money and influence interest rates.
D. Quantitative easing: Quantitative easing is a monetary policy tool used by the Federal Reserve to stimulate the economy and lower interest rates. It involves the purchase of long-term securities, such as government bonds, by the central bank to increase the money supply and lower borrowing costs.
Based on the options provided, the correct answers are A. Lending from the discount window, B. Changing the reserve requirement, C. Changing the interest rate paid on reserves deposited at the Fed, and D. Quantitative easing. Federal transfer payments (E) are not a direct tool used by the Federal Reserve to manipulate interest rates in the economy.
Learn more about Federal transfer payments from the given link!
https://brainly.com/question/7176766
#SPJ11
Accoanting is the process of identifying. recording and commanicating cconomic information to users to permit informed judgements and decision making. The Accoanting equation is an integral component of accounting. REQUIRED Perform the following: a) demonstrate the meaning of terms "debil" and "credit" and explain why it is critical to the accounting equation and field of accounting. Include diagrams to support your ansaer. (25 marks) b) interpret how these conponents, Debit and Credit relate to each other in financial statements. Include differences between cash and accrual accoeanting. Censtruct TWO (2) relevant examples, Expand the seope of examples lo not just local but worldwide cases.
Debit and credit are fundamental concepts in accounting that are used to record and classify financial transactions.
They are critical to the accounting equation and the field of accounting because they help maintain the balance and accuracy of financial records. In accounting, the accounting equation is expressed as:
Assets = Liabilities + Equity Debit and credit affect different types of accounts in the accounting equation: Debit: Debit entries increase assets and expenses while decreasing liabilities and equity. Debit entries are recorded on the left side of an account. Credit: Credit entries increase liabilities and equity while decreasing assets and expenses. Credit entries are recorded on the right side of an account. To illustrate the concept, let's consider an example. Suppose a company purchases inventory for cash. This transaction affects two accounts: Cash (an asset account) and Inventory (also an asset account). Cash Account: Since cash is being paid out, it decreases, and we record a debit entry to the Cash account.
Inventory Account: The inventory is acquired, which increases the company's assets, and we record a credit entry to the Inventory account.
This transaction maintains the balance of the accounting equation: Assets = Liabilities + Equity. The total assets remain unchanged, but there is a shift within the asset accounts.
b) In financial statements, debit and credit affect different types of accounts based on the chosen accounting method, either cash or accrual accounting. Cash Accounting: In cash accounting, transactions are recorded when cash is received or paid. Debit and credit entries reflect the movement of actual cash.
Example 1: Cash Sale
Debit: Cash account (increase in cash)
Credit: Sales account (increase in revenue)
Example 2: Cash Expense
Debit: Expense account (increase in expenses)
Credit: Cash account (decrease in cash)
Accrual Accounting:
In accrual accounting, transactions are recorded when they occur, regardless of when cash is received or paid. Debit and credit entries reflect economic activity rather than actual cash flow.
Example 1: Accrued Revenue
Debit: Accounts Receivable account (increase in assets)
Credit: Revenue account (increase in revenue)
Example 2: Accrued Expense
Debit: Expense account (increase in expenses)
Credit: Accrued Expense account (increase in liabilities)
These examples demonstrate how debit and credit entries affect different accounts based on the accounting method used. They are fundamental tools for maintaining the balance of the accounting equation and accurately representing financial transactions in financial statements. These concepts apply not only to local cases but also to worldwide accounting practices.
Learn more about accounting here:
https://brainly.com/question/32947766
#SPJ11
The anticipated flow of income back to an investor is
called:
1.Anticipated yields
2.Capital gain
3.Expected return
4.Investment risk result
The anticipated flow of income back to an investor is called option 3) Expected return.
Expected return is the anticipated yield on an investment. An anticipated yield is what an investor believes they would receive on an investment over a certain amount of time. When making investment decisions, most investors use expected return as a factor in deciding which investment to make.
Expected Return Formula
Expected return is calculated by multiplying the expected value of an investment's payoff by the probability of getting that payoff. In other words, the expected return formula is:
Expected Return = (Probability of Gain * Amount of Gain) + (Probability of Loss * Amount of Loss)
Expected return is also used to assess the likelihood of an investment meeting the investor's objectives. When investing in mutual funds, stocks, or other financial instruments, expected returns are frequently employed as a measure of the investment's potential value or future success.
To know more about the investor, visit:
https://brainly.com/question/31996711
#SPJ11
Beck Company set the following standard unit costs for its single product. The predetermined overhead rate is based on a planned operating volume of 60% of the productive capacity of 50,000 units per quarter. Overhead is applied based on DLH. The following flexible budget information is available. During the current quarter, the company operated at 70% of capacity and produced 35,000 units of product; actual direct labor fotaled 148,800 hours. Actual costs incurred during the curreat quarter follow: Required: On a separate sheet of paper, compute the following variances: (A) total direct materials variance; direct materials price variance; direct materials quantity variance (B) total direct labor variance; direct labor rate variance; direct labor efficiency variance (C) total overhead variance; controllable variance; volume variance
(A) Total Direct Material Variance: Actual Material Cost - Standard Material CostActual Material Cost = 35,000 × $6.30 = $220,500Standard Material Cost = 35,000 × $6.50 = $227,500Total Direct Material Variance = $220,500 - $227,500 = $-7,000 (Favorable)Direct Material Price Variance.
Actual Quantity (AQ) × (AP - SP)AQ = 131,000 lbs.AP = $1.70 per lb.SP = $1.75 per lb.Direct Material Price Variance = 131,000 × ($1.70 - $1.75) = $-6,550 (Favorable)Direct Material Quantity Variance: (AQ - SQ) × SP = (131,000 - 122,500) × $1.75 = $14,875 (Unfavorable)(B) Total Direct Labor Variance.
Actual Labor Cost - Standard Labor CostActual Labor Cost = 148,800 × $11.20 = $1,669,760Standard Labor Cost = 148,800 × $11.00 = $1,638,240Total Direct Labor Variance = $1,669,760 - $1,638,240 = $31,520 (Unfavorable)Direct Labor Rate Variance: Actual Hours (AH) × (AR - SR)AH = 148,800 hours.
To know more about Material visit:
https://brainly.com/question/30503992
#SPJ11
Consider the supply of coal. What would make the supply of coal more elastic? The supply of coal would become more elastic if
A. The time horizon becomes longer.
B. It becomes a larger portion of a consumer's budget
C. more substitutes were available.
D. it were more of a luxury.
The correct answer is C. More substitutes were available.
When the supply of a product becomes more elastic, it means that the quantity supplied is more responsive to changes in price. In the case of coal, if there are more substitutes available, it provides alternative options for consumers and producers.
When there are numerous substitutes for coal, suppliers can easily switch to producing those substitutes if the price of coal becomes less favorable. This flexibility in production makes the supply of coal more elastic.|
Option A, the time horizon becoming longer, is not directly related to the elasticity of supply. It may affect long-term production decisions, but elasticity refers to short-term responsiveness.
Option B, coal becoming a larger portion of a consumer's budget, would make the demand for coal more inelastic, not the supply.
Option D, coal being more of a luxury, is also related to the demand side rather than the supply. The luxury or necessity status of a good affects consumer preferences and willingness to pay, influencing demand elasticity.
To learn more about, Supply, click here, https://brainly.com/question/28285610
#SPJ11
a bond pays a $55 coupon once per year. the bond has a face value of $1,000 and matures in 5 years. spot rates are as follows. under the expectations hypothesis, what is the expected price of this bond in two years, just after it has made its 2nd coupon payment?
The bond is anticipated to trade at $909.92 in two years, immediately following the second coupon payment.
the current worth of the future coupon payments:
Year 3 coupon payment: $50
Discount percentage for year three: 3%
$50 / (1 + 3.00%)3 represents the present value of the third coupon payment.
Fourth-year coupon payment: $50
4.00% is the discount rate for year 4.
$50 / (1 + 4.0%)4 represents the present value of a coupon payment in year 4.
Fifth-year coupon payment: $50
5% off for the fifth year.
Present value of the coupon payment in year 5 is $50 / (1 + 5.00%)5.
Next, we must determine the bond's face value (or "maturity value") in present value terms:
Face amount: $1000
5% off for the fifth year.
$1,000 / (1 + 5.00%)5 = the face value's present value.
The predicted bond price in two years can be calculated by adding the present values of the bond's remaining coupon payments and face value:
Expected price = Present value of the third-year coupon payment plus the fourth-year coupon payment plus the fifth-year coupon payment plus the current face value.
Keep in mind that the spot rates are annual rates, therefore we must adjust the discount rates for the appropriate time periods.
Let's determine the bond's anticipated price in two years:
Present value of the coupon payment in year 3 is equal to $50 divided by (1 + 3.0%), (1 + 4.0%, and (1 + 5.00%).^5 = $1,000 / (1 + 5.00%)^5
Expected price is the present value of the coupon payment in year 3, year 4, year 5, and year 6, plus the present value of the face value.
Let's compute the values now:
Present value of coupon payment in year 3 = $50 / (1 + 0.03)^3 = $50 / (1.03)^3 ≈ $45.63
= $50 / (1 + 0.04)^4 = $50 / (1.04)^4 ≈ $42.19
= $50 / (1 + 0.05)^5 = $50 / (1.05)^5 ≈ $38.57
= $1,000 / (1 + 0.05)^5 = $1,000 / (1.05)^5 ≈ $783.53
Expected price: $909.92 ($45.63 plus $42.19 and $38.57 and $783.53).
Learn more about bond, from:
brainly.com/question/33648670
#SPJ4
Marketing channels allow companies to get their products in the appropriate outlets in sufficient quantities to meet customer demand and there are two main ways which business get their product to consumers: ""direct marketing channel"" and ""indirect marketing channel"". Explain the differences between the two and illustrate with example. (Expected word counts: 150 – 250 words).
Marketing channels can be defined as the routes or pathways used by firms or businesses to distribute their products from the producers to the ultimate consumer.
It allows companies to get their products in the appropriate outlets in sufficient quantities to meet customer demand. There are two main ways which business get their product to consumers, which are direct marketing channel and indirect marketing channel.The direct marketing channel is a kind of marketing channel in which the firm or business sells directly to the customers without intermediaries or middlemen. In this channel, the manufacturer or producer of the product is responsible for performing all the necessary marketing activities to get the product from the factory to the consumer.
Direct marketing channel is suitable for businesses that want to build a direct relationship with their customers. This kind of marketing channel provides the manufacturer with better control over the price, promotion, and distribution of the product. An example of direct marketing channel is Dell computers, which use their website and catalogues to sell their products directly to consumers without intermediaries or middlemen. The intermediaries or middlemen help to reduce the amount of work and time required to distribute products. An example of indirect marketing channel is Walmart, which uses its retail stores to sell products from different manufacturers to the consumers.
To know more about pathways visit:
https://brainly.com/question/13063054
#SPJ11
the idea that wants are virtually unlimited but the resources to meet those wants are limited is called: a) scarcity b) the dismal conclusion c) the want–resource paradox d) the economic gap.
Scarcity is the foundational concept that underlies economic reasoning and decision-making, highlighting the mismatch between unlimited wants and limited resources.
The correct answer is (a) scarcity.
Scarcity refers to the fundamental economic condition where unlimited human wants and needs exceed the available resources to satisfy them. It is a fundamental concept in economics and recognizes the inherent limitation of resources relative to the desires and demands of individuals and society as a whole. While wants and desires are virtually unlimited, resources such as time, money, labor, raw materials, and technology are finite and limited.
Scarcity drives the need for individuals, businesses, and governments to make choices and prioritize their resource allocation. It creates the necessity for trade-offs and decision-making in order to allocate resources efficiently and effectively to meet the most pressing needs and wants.
Therefore, scarcity is the foundational concept that underlies economic reasoning and decision-making, highlighting the mismatch between unlimited wants and limited resources. It is a concept that permeates various economic analyses and helps us understand the fundamental challenges and choices faced in the pursuit of fulfilling our wants and needs.
To learn more about Scarcity, click here:https://brainly.com/question/30264812
#SPJ11
Explain how the ratings process for municipalities interested in securing financing and co-financing for own or co-developed renewable energy power plants with independent producers or small and embedded power producers would work, and evaluate the risks and viability of this industry structure where municipalities replace Electricity company in the developer and power purchase agreements?
The ratings process evaluates municipalities' creditworthiness and capabilities. Replacing electricity providers in agreements offers benefits but also carries risks. Proper risk assessment and strong contracts are crucial for viability.
The creditworthiness and capabilities of towns seeking finance and co-funding for renewable energy power plants are assessed as part of the ratings process. Municipalities would need to go through a thorough evaluation, taking into account things like their financial situation, ability to take on debt, governance procedures, and project management experience.
In developer and power purchase agreements, switching out electricity providers can have benefits like local control and potential cost savings. It also brings risks, though. Municipalities may lack knowledge of energy markets and project development, which could result in operational difficulties, cost overruns, and delays. Furthermore, taking on debt could put a strain on municipal finances and subject them to market swings. For this industry to remain viable, proper risk analysis, capacity building, and strong contractual agreements are essential.
Learn more about risk assessment here:
https://brainly.com/question/31632025
#SPJ11
Which of the following would NOT be considered a single-market manufacturer?
a. cheese and dairy manufacturers
b. pin manufacturers
c. button manufacturers
d. zipper manufacturers
e. car part manufacturers
Car part manufacturers are not single-market manufacturers because they only sell their products to a few customers.
Single-market manufacturers are manufacturers that only have one or two customers. Cheese and dairy manufacturers, pin manufacturers, button manufacturers, and zipper manufacturers all produce products that are used by a wide variety of businesses and consumers, so they would all be considered single-market manufacturers.
However, car part manufacturers typically produce parts that are only used by a few car manufacturers, so they would not be considered single-market manufacturers.
Here are some additional reasons why car part manufacturers would not be considered single-market manufacturers:
Car part manufacturers typically produce parts that are customized to the specific needs of each car manufacturer.
Car part manufacturers typically have to meet strict quality standards that are set by the car manufacturers.
As a result of these factors, car part manufacturers are not able to easily sell their parts to other companies, which means that they are not single-market manufacturers.
To learn more about Single-market: https://brainly.com/question/29615473
#SPJ11
The basic reason manufacturers spend time and money building their own brands is to build brand equity. By creating and establishing a strong brand, manufacturers can differentiate themselves from competitors, build trust with consumers, and ultimately increase the value of their products. Brand equity refers to the value and reputation that a brand holds in the market.
Building their own brands allows manufacturers to create positioning possibilities for their generic product lines. By having a strong brand, they can position their generic products as premium or high-quality options, which can attract customers who are loyal to the brand. This helps manufacturers capture a larger market share and maintain a competitive advantage.
Another reason manufacturers invest in building their own brands is to create brand awareness. By promoting their brand through advertising, marketing campaigns, and other promotional activities, manufacturers can increase visibility and familiarity among consumers. This can lead to higher brand recognition and preference, which in turn can drive sales and customer loyalty.
Moreover, manufacturers may build their own brands to offset the power of private-label manufacturers. Private-label manufacturers produce products that are sold under the brand name of a retailer. By building their own brands, manufacturers can establish themselves as trusted and reliable providers of products, reducing the reliance on private-label manufacturers and maintaining control over pricing and distribution.
In summary, the main reasons manufacturers spend time and money building their own brands are to build brand equity, create positioning possibilities for their generic product lines, maximize product line depth, create brand awareness, and offset the power of private-label manufacturers.
To know more about manufacturers visit
https://brainly.com/question/33621434
#SPJ11
Rottino Company purchased a new machine on October 1, 2015, at a cost of $150,000. The company estimated that the machine will have a salvage value of $12,000. The machine is expected to be used for 10,000 working hours during its 5-year life. Compute the depreciation expensive under the following methods.
A. Straight Line for 2015
B. Units of Activity for 2015, assuming machine usage was 1,700 hours
C. Declining-balance us
A. Straight Line for 2015: Depreciation expense for 2015 = (Cost - Salvage value) / Useful life in years = ($150,000 - $12,000) / 5 = $27,600.
B. Units of Activity for 2015: Depreciation expense for 2015 = (Cost - Salvage value) × (Actual usage / Total estimated usage) = ($150,000 - $12,000) × (1,700 / 10,000) = $24,120.
A. For the straight-line method, the depreciation expense is calculated by subtracting the salvage value from the cost and dividing it by the useful life in years. In this case, the depreciation expense for 2015 is $27,600.
B. The units of activity method calculates depreciation based on the actual usage of the machine. The depreciation expense is determined by multiplying the cost minus the salvage value by the ratio of actual usage to total estimated usage. Since the actual usage is given as 1,700 hours and the total estimated usage is 10,000 hours, the depreciation expense for 2015 is $24,120.
learn more about depreciation expense here:
https://brainly.com/question/30369224
#SPJ11
Pierre's Hair Salon is considering opening a new location in French Lick, California. The cost of building a new salon is $297,000. A new salon will normally generate annual revenues of $63,245, with annual expenses (including depreciation) of $39,000. At the end of 15 years the salon will have a salvage value of $76.000. Calculate the annual rate of return on the project. Annual rate of return 8
The calculation of the annual rate of return on a project is done to find out whether the project is profitable or not. A higher rate of return indicates that the project is profitable. The formula for calculating the annual rate of return on a project is shown below Annual rate of return (ARR) = (Average annual income from project / Total investment cost of the project) × 100%.
Given that the cost of building a new salon is $297,000, the new salon will normally generate annual revenues of $63,245, and the annual expenses (including depreciation) of the new salon are $39,000. Therefore, the average annual income from the project is Average annual income = (Annual revenues - Annual expenses) = ($63,245 - $39,000) = $24,245.
The salvage value of the new salon at the end of 15 years is $76,000. The total investment cost of the project is Total investment cost = (Initial investment cost - Salvage value) = ($297,000 - $76,000) = $221,000Now, the ARR of the project is:ARR = (Average annual income from project / Total investment cost of the project) × 100%ARR = ($24,245 / $221,000) × 100%ARR = 10.97%The ARR of the project is 10.97%. Therefore, the annual rate of return on the project is 10.97%.
To know more about investment visit:
https://brainly.com/question/15105766
#SPJ11
Fuzzy Monkey Technologies, Inc., purchased as a long-term investment $240 million of 6% bonds, dated January 1, on January 1, 2018. Management intends to have the investment available for sale when circumstances warrant. When the company purchased the bonds, management elected to account for them under the fair value option. For bonds of similar risk and maturity the market yield was 8%. The price paid for the bonds was $219 million. Interest is received semiannually on June 30 and December 31. Due to changing market conditions, the fair value of the bonds at December 31, 2018, was $230 million.
Required:
1. to 3. Prepare the relevant journal entries on the respective dates (record the interest at the effective rate).
4-a. At what amount will Fuzzy Monkey report its investment in the December 31, 2018, balance sheet?
4-b. Prepare the journal entry necessary to achieve this reporting objective.
5. How would Fuzzy Monkey’s 2018 statement of cash flows be affected by this investment assuming Fuzzy anticipates holding these investments for a sufficiently long period?
1. Jan 1, 2018: Investment in bonds (fair value) $219M; Cash $219M.
2. Jun 30, 2018: Cash $6M; Interest revenue $6M.
3. Dec 31, 2018: Cash $6M; Interest revenue $6M.
4-a. Investment reported at fair value: $230M.
4-b. Adjust investment to fair value: Investment in bonds (fair value adjustment) $11M; Unrealized gain on investment in bonds $11M.
5. Statement of cash flows unaffected by fair value changes.
1. Journal entry on January 1, 2018:
Investment in bonds (fair value) $219 million
Cash $219 million
2. Journal entry on June 30, 2018:
Cash (interest received) $6 million ($240 million × 6% × 6/12)
Interest revenue $6 million
3. Journal entry on December 31, 2018:
Cash (interest received) $6 million ($240 million × 6% × 6/12)
Interest revenue $6 million
4-a. Fuzzy Monkey will report its investment at fair value, which is $230 million, on the December 31, 2018, balance sheet.
4-b. Journal entry to adjust the investment to fair value on December 31, 2018:
Investment in bonds (fair value adjustment) $11 million ($230 million - $219 million)
Unrealized gain on investment in bonds $11 million
5. Fuzzy Monkey's 2018 statement of cash flows will not be affected by this investment since it is accounted for under the fair value option. Changes in fair value are not reflected in the statement of cash flows. Only cash flows from operating, investing, and financing activities are included in the statement of cash flows.
Learn more about Journal entry here:
https://brainly.com/question/33045014
#SPJ11
The person who is elected by stockholders to determine and carry out the goals and policies of a corporation is legally called:
1.The board advisor
2.The director
3.The chief operating officer
4.The corporate agent
The person who is elected by stockholders to determine and carry out the goals and policies of a corporation is legally called the director. Option 2 is the right answer.
What is a director?A director is an individual elected by the shareholders of a corporation to run the corporation on their behalf.
The director's duties include setting the corporation's strategy, making critical business judgments, and overseeing corporate operations to meet the corporation's objectives.
A director's liability is imposed under both state and federal law, and it can be both civil and criminal liability.
Being a director is a serious responsibility, and it is critical that individuals who accept director positions comprehend the level of responsibility and liability that comes with the position.
Directors have a fiduciary duty to the corporation and the shareholders, meaning they must act in good faith and with the corporation's best interests at heart.
To know more on Stockholders visit:
https://brainly.com/question/18523103
#SPJ11
What is the main difference between a privately held company and a publicly held company? O Privately held companies are started by individuals and public ones are started by the government. O Privately held companies have shares owned by investors while publicly held companies have their shares available to the public on Wall Street. O Privately held companies are owned by citizens, and publicly held ones have shares owned by the government. O Privately held companies are for-profit, while publicly held ones are non-profit. Question 4 1 pts Nonprofit organizations do not aim to make money for shareholders. O True O Fals
The main difference between a privately held company and a publicly held company is that privately held companies have shares owned by investors, while publicly held companies have their shares available to the public on Wall Street.
In a privately held company, ownership is typically held by a small number of individuals or a closely-knit group, and the shares are not traded on a public stock exchange. In contrast, publicly held companies have their shares listed on a stock exchange, allowing anyone to buy and sell the shares.
Regarding the second question, it is true that nonprofit organizations do not aim to make money for shareholders. Nonprofit organizations, also known as non-governmental organizations (NGOs) or charities, are typically formed for social, cultural, educational, or humanitarian purposes.
Their primary objective is to serve a specific cause or provide a public benefit, rather than generating profits for shareholders. Nonprofit organizations often rely on donations, grants, and funding from various sources to support their activities and achieve their mission.
Learn more about Nonprofit organizations from the given link!
https://brainly.com/question/30098771
#SPJ11
: Suppose the government enacts a stimulus program composed of $400 billion of new government spending and $200 billion of tax cuts for an economy currently producing a GDP of $13,000 billion. If all of the new spending occurs in the current year and the government expenditure multiplier is 1.8, the expenditure portion of the stimulus package will add percentage points of extra growth to the economy. (Round your response to two decimal places.)
Given that the stimulus package is composed of $400 billion of new government spending and $200 billion of tax cuts for an economy currently producing a GDP of $13,000 billion and that all of the new spending occurs in the current year and the government expenditure multiplier is 1.8, we are to find the percentage points of extra growth to the economy.
Using the formula,
GDP = C + I + G + NX where,
GDP = $13,000 Billion
C = Consumption expenditure
I = Investment expenditure
G = Government expenditure
NX = Net exports
The expenditure portion of the stimulus package can be found using the formula, Government expenditure multiplier (k) = ΔY / ΔGwhere,ΔY = Change in real GDPΔG = Change in government spending
Solving for ΔY,ΔY = k * ΔGGiven k = 1.8 and ΔG = $400 Billion,ΔY = 1.8 * $400 Billion= $720 Billion
The percentage points of extra growth to the economy is given by, Percentage points of extra growth = (ΔY / Y) * 100where,Y = Initial GDP= $13,000 Billion
Therefore, Percentage points of extra growth = ($720 Billion / $13,000 Billion) * 100= 5.54%
Therefore, the expenditure portion of the stimulus package will add 5.54% percentage points of extra growth to the economy.
To know more about GDP visit :
https://brainly.com/question/30504843
#SPJ11
What is the role of the FTC in U.S. cybersecurity law and policy? In your opinion, does it play too big, or too small, of a part in safeguarding consumers from unfair and deceptive trade practices?
The answer to the role of the FTC in U.S. cybersecurity law and policy is that the FTC protects customers from unfair and deceptive trade practices. It is authorized to enforce Section 5 of the Federal Trade Commission Act, which prohibits unfair or deceptive acts or practices, and this includes data security.
The Federal Trade Commission is a vital agency when it comes to safeguarding consumers from unfair and deceptive trade practices, which includes cybersecurity law and policy. FTC's responsibility and authority are broad, from shielding customer privacy to protecting businesses from unfair competition. This agency has long been committed to consumer protection.
The FTC also performs investigations and initiates enforcement actions against companies whose data security practices are inadequate and do not meet the required security standards. Additionally, it provides helpful information to assist businesses in safeguarding customers' personal data, such as consumer protection data. Therefore, it is safe to say that the FTC is doing a good job of safeguarding consumers from unfair and deceptive trade practices.
Learn more about cybersecurity law and policy: https://brainly.com/question/32926690
#SPJ11
During the recent financial crisis, M&A activity ______, whereas in 2011, M&A activity ______.
(A) declined; increased
(B) declined; declined
(C) increased; increased
(D) increased; declined
The correct answer is (A) declined; increased, reflecting the decline in M&A activity during the financial crisis and the subsequent increase in activity in 2011.
During the recent financial crisis, M&A (mergers and acquisitions) activity declined. The financial crisis, which occurred in 2008, had a significant impact on the global economy, causing a decline in business confidence, tightening credit markets, and overall economic uncertainty. These factors led to a decrease in M&A activity as companies were more cautious and risk-averse during the crisis.
In contrast, in 2011, M&A activity increased. By that time, the global economy had started recovering from the financial crisis, and companies were regaining confidence. Improving economic conditions, favorable market dynamics, and increased availability of financing contributed to an uptick in M&A deals as companies sought growth opportunities, market consolidation, and strategic partnerships.
Therefore, the correct answer is (A) declined; increased, reflecting the decline in M&A activity during the financial crisis and the subsequent increase in activity in 2011.
To learn more about, financial crisis , click here, https://brainly.com/question/32368340
#SPJ11
What is it called when countries bring in products and send products to other countries?
The process of bringing in products from other countries is called "importing," while the process of sending products to other countries is called "exporting."
When countries engage in international trade, they participate in two fundamental activities: importing and exporting. Importing refers to the process of bringing goods and services into a country from foreign sources.
This allows domestic consumers and businesses to access a wider variety of products that may not be available locally or can be obtained at a lower cost. On the other hand, exporting involves selling and sending goods and services produced domestically to other countries.
Exporting allows businesses to reach new markets, expand their customer base, and generate revenue by selling their products to consumers outside their home country. Both importing and exporting play crucial roles in global trade and economic development.
To know more about exporting:
https://brainly.com/question/26428996
#SPJ4
the principle task of marketers is to offer a product or service that offers satisfaction. such an exchange process is intended to satisfy customer ___________.
The principle task of marketers is to offer a product or service that offers satisfaction. Such an exchange process is intended to satisfy customer needs.
Marketers aim to identify and understand customer needs and desires in order to develop products or services that fulfill those needs effectively. Customer needs encompass the requirements, desires, or problems that individuals seek to address or resolve through the consumption of goods or services.
By offering products or services that meet customer needs, marketers strive to create value and satisfaction for their target audience. This involves conducting market research, gathering insights, and analyzing consumer behavior to gain a deep understanding of what customers are looking for. Through this understanding, marketers can develop products that align with customer preferences, provide desired benefits, and ultimately satisfy their needs.
The exchange process between marketers and customers is centered around meeting customer needs. Customers engage in transactions with marketers by exchanging money or other valuable resources for products or services that they believe will satisfy their needs. Marketers, in turn, strive to deliver on their promises by providing offerings that meet or exceed customer expectations, thereby creating a mutually beneficial exchange.
To learn more about, Customer Needs, click here: https://brainly.com/question/25429767
#SPJ11
Explain, in detail, Interest-Based bargaining and three
advantages of this style of negotiation when it comes to labour
relations.
Interest-Based bargaining refers to a method of negotiation that allows parties to identify their interests and then work together to achieve mutually beneficial solutions. It is also known as mutual gains bargaining or principled negotiation. It is a negotiation strategy that focuses on the interests of the parties rather than their positions.
It aims to create a win-win outcome that benefits both parties. Interest-Based bargaining helps in improving labour relations in the following three ways:
1. Better relationships: One advantage of Interest-Based bargaining is that it promotes better relationships between labor and management. It helps to build trust between the parties, which is essential for achieving long-term success.
The parties work together to identify common interests and find ways to achieve them, rather than focusing on their differences. By doing so, they can create a more positive and collaborative work environment.
2. Cost-Effective: Another advantage of Interest-Based bargaining is that it is cost-effective. Traditional bargaining often leads to a hard stance that requires additional time and money to be spent in legal representation.
Interest-Based bargaining focuses on collaborative problem-solving rather than adversarial negotiation. By focusing on the interests of both parties, it is possible to find creative solutions that are more cost-effective and less time-consuming.
3. Quality Outcomes: Interest-Based bargaining provides better quality outcomes for the parties involved. When both labor and management work together to find a mutually beneficial solution, they are more likely to arrive at a better outcome.
By focusing on the interests of both parties, they can find solutions that meet the needs of both sides. This can lead to a more stable and productive work environment.
To know more about bargaining visit:
https://brainly.com/question/6367770
#SPJ11
Economic activity declines during these two stages of the
business cycle:
Select one:
a.
Stages 1 and 2
b.
Stages 2 and 3
c.
Stages 3 and 4
d.
Stages 1 and 4
e.
Stages 1 and 3
The answer to the question is stages 1 and 2.
There are four stages of the business cycle.
These stages are the boom, recession, trough, and expansion.
The business cycle is a graph that depicts the fluctuations of economic activity over time. These fluctuations are a normal part of an economic system.
The first stage of the business cycle is known as the expansion stage.
It's characterized by a rise in economic activity. During this stage, businesses are expanding, employment rates are increasing, and consumer spending is rising.
The second stage is called the peak.
This is the point when the economy reaches its maximum point before it begins to decline. Economic activity starts to decrease during this stage, and businesses start to reduce their output and employees.
The third stage of the business cycle is known as the recession stage.
It's characterized by a decrease in economic activity. During this stage, businesses are reducing their output and employees, and consumer spending is falling.
The fourth stage is the trough.
This is the lowest point in the business cycle. It's characterized by low economic activity. The economy is at a standstill during this stage, and businesses are not expanding or hiring employees.
economic activity declines during the first two stages of the business cycle.
To know more about business visit:
https://brainly.com/question/15826771
#SPJ11
Violation of Public Policy
Discharge for refusing to violate a professional code of conduct falls under which exception to employment-at-will doctrine?
Discharge for refusing to violate a professional code of conduct falls under which exception to employment-at-will doctrine?
The exception to the employment-at-will doctrine that discharge for refusing to violate a professional code of conduct falls under is the exception of violation of public policy.
Public policy is a broad concept that refers to social and moral values that a particular society deems important, such as health, safety, and environmental protection. The public policy represents a set of goals that a society or a government pursues to make society a better place. Public policy is concerned with preserving the interests of the public at large.
In the United States, the principle of employment will permit employers to discharge their employees at any time and for any reason, subject to certain restrictions that are grounded in common law and/or federal and state statutes. Exceptions to the employment-at-will doctrine provide the employee with legal remedies in cases where employers fire employees for reasons that are prohibited by law or public policy, as well as other reasons.
Learn more about public policy: https://brainly.com/question/30137681
#SPJ11
which of the following is not a characteristic of services? part 2 a. standardized product b. intangible c. produced and consumed simultaneously d. unique
The answer to the question is the following :Option A (Standardized product) is not a characteristic of services. It refers to the fact that a service can be customised to meet the specific needs of a customer and that it can be delivered in a variety of ways.
Services are characterized by several characteristics. The five most common characteristics of services are as follows:
1. Intangibility2. Perishability3. Variability4. Inseparability5. Non-ownership of servicesStandardized product, on the other hand, is not a characteristic of services. A service can be tailored to meet the specific needs of a customer. It is delivered in a variety of ways.
A service is generally provided in a highly customized manner, which is tailored to the specific needs of the customer. The customization of a service is one of its most important attributes, as it allows the provider to meet the specific needs of the customer.
To know more about Standardized product visit:
https://brainly.com/question/24271635
#SPJ11
Complete an industry analysis to explore the forces impacting
EasyJet and establish the key drivers of change.
EasyJet is a well-known airline carrier company based in the UK. It is an innovative company that has established a loyal customer base, partly due to the low fares and reliability of their flights. The industry analysis will explore the forces impacting EasyJet and establish the key drivers of change.
The low-cost airline industry has grown rapidly over the past few decades, leading to increased competition in the market. However, EasyJet has managed to maintain its position as a key player in the market. Below are some of the key drivers of change impacting EasyJet:
Economic factors: The airline industry is particularly sensitive to economic conditions. The recession of 2008 had a severe impact on the aviation industry. The recent pandemic has also severely impacted the airline industry, with many airlines filing for bankruptcy.
Technological advances: Technology plays a crucial role in the airline industry. Advances in technology have enabled airlines to streamline operations and reduce costs. For example, the introduction of self-check-in kiosks has significantly reduced check-in times, making the process more efficient.
Environmental factors: Climate change has become an increasingly important issue in recent years, and the aviation industry is under increasing pressure to reduce its carbon footprint. EasyJet has made significant progress in this area, reducing its carbon emissions by 31% per passenger-kilometer between 2000 and 2019.
Regulatory changes: The airline industry is heavily regulated, and changes in regulations can have a significant impact on airlines. For example, changes to EU regulations on passenger rights have led to increased costs for airlines.
Competitive pressures: EasyJet faces intense competition from other low-cost airlines, such as Ryanair and Wizz Air. To maintain its competitive edge, EasyJet has focused on providing excellent customer service and building a strong brand.
Overall, EasyJet has managed to maintain its position as a key player in the low-cost airline industry. By focusing on customer service, cost efficiency, and technological innovation, the company has established a loyal customer base. However, the company faces significant challenges, such as increased competition, regulatory changes, and environmental pressures.
To know more about Economic visit:
https://brainly.com/question/33708534
#SPJ11
Kiranjeet Lc Imc today at 3:07 p.m. you, immed ately saying that it wouldn't be possible, and you've been reluctant to bring it up again. You were talking with friends about this problem, and they suggested that you mediation service. You thought it was a great idea. You like the work and the other staff here. You don't know Robin well, but are willing to be open minded. Robin's Confidential Information: You are the Director of the Admissions Office. You have been there 12 years and are responsible for supervising a staff of ten people. Chris is relatively new (1 1/2 years), he is kind of an unusual type, and ofien comes up with offinvolved Chris working late sometimes and coming in late scmetimes. You run a tight ship. You think staft should be able to express their opinions, but then they need to accept your decisions. You're not opposed to change, as long as it's well thought out and well-reasoned. You have been under a lot of stress lately because it's been really busy, you have a lot of paperwork to complete, attend. You admit that sometimes you are short-tempered with people. When Chris suggested mediation, you agreed, if it wouldn't take too long. You are somewhat skeptical about mediation (afraid it could undermine your power). You are an in-house mediator and you work for the same employer as Chris and Robin. You work in the human resources department
Mediation is the process of solving a dispute by means of a neutral third-party. This third party is known as a mediator, and their aim is to resolve the conflict through open communication and cooperation. Chris suggested that Kiranjeet use mediation to resolve her dispute with Robin. Kiranjeet agreed to try mediation, although she had some reservations, which are normal. Kiranjeet will be the mediator since she works in the Human Resource Department. Kiranjeet will have to remain impartial throughout the mediation process.
Robin is the Director of Admissions and has been there for twelve years. She is responsible for supervising ten employees. Chris is a new employee who has been there for one and a half years. He is not always on time and sometimes works late. Kiranjeet has a strict management style, and she believes that her staff should be able to express their opinions, but they should accept her decisions. Kiranjeet has been under a lot of stress lately due to a heavy workload. She has a lot of paperwork to complete and meetings to attend. Kiranjeet may need to control her short temper when dealing with people. To conclude, mediation is an excellent way of resolving disputes. Kiranjeet has agreed to try mediation, and she will be the mediator. Kiranjeet will need to remain impartial throughout the mediation process.
To know more about Mediation visit:
https://brainly.com/question/30783013
#SPJ11
What is a major risk in following legal advice found on the internet?
A. The advice may be given by a lawyer who does not have an official office
B. The advice may not be strictly accurate or relevant to your type of business
C. The service is free and there is no paperwork to document the advice
D. Sample documents and forms will not be available
The advice may not be strictly accurate or relevant to your type of business.
One major risk in following legal advice found on the internet is that the advice may not be strictly accurate or relevant to your specific type of business. The internet is a vast source of information, and while there are reputable legal resources available online, there is also a wide range of content that may not be reliable or tailored to individual circumstances. Legal advice should be accurate, up-to-date, and applicable to the specific legal jurisdiction and business context. Relying on inaccurate or irrelevant legal advice can lead to potential legal issues, compliance issues, or ineffective decision-making. It is always advisable to consult with a qualified attorney who can provide personalized advice based on your specific situation to mitigate such risks. Options A, C, and D mention other potential risks but are not as directly related to the accuracy and relevance of the advice itself.
To learn more about advice:
https://brainly.com/question/2205033
#SPJ11
