The statement describing nucleic acid has been that nucleic acid provides the blueprint for the formation of proteins.
Nucleic acid has been the genomic material in the body that performs the function of storage of information. DNA and RNA are nucleic acids.
The proteins are the biomolecules that are composed of amino acid units bound by the polypeptide bond. The information for the correct sequence of binding of protein has resulted from the mRNA codes.
The correct sequence and folding results in the operational protein, that has been able to perform varying functions. The codes for the binding of protein have resulted from the blueprint consisting of nucleic acid.
Thus, nucleic acid performs the function of acting as a blueprint for the formation of proteins.
For more information about proteins, refer to the link:
https://brainly.com/question/2193769
A sealed flask initially contains pure nitrogen dioxide gas (NO,). Over time, the nitrogen dioxide forms dinitrogen tetroxide gas (N,O.). The graph below shows the relative amounts of (NO,) and (N20.) over time. What is true about the time indicated by the blue arrow?
This problem is providing information about the equilibrium reaction whereby nitrogen dioxide gas produced dinitrogen tetroxide gas as shown on the attached picture and the following chemical equation:
NO₂ (g) ⇄ N₂O₄ (g)
In such a way, we can consider the given choices to reason the following: the blue arrow is pointing out the arrival to the equilibrium condition for the reaction, a point in which the rate of the forward reaction (formation of N₂O₄) is equal to the rate of the reverse reaction (formation of NO₂), because the molecules will fluctuate to the same relative amounts defined by the equilibrium constant.
Therefore the answer will be the first one on the attached file, which can vary on your online homework format.
It is important to note that the reactant is not used up at any point of the graph (concentration drops to 0) and also, the activation energy cannot be analyzed with this sparse information.
Learn more:
(equilibrium concentrations) https://brainly.com/question/7949757Help. 50 points. Need honest answers.
Answer:
ok
Explanation:
What is the molarity of a 75.0 mL solution that contains 0.225 g of
potassium nitrate?
Answer:
M=0.0297M
Explanation:
we know that molarity equals number of mole of solute over the volume of solution.
M=n/V but n=m/M
n=0.225g÷101g/mol =0.00223mol
M=0.00223mol/0.075l
M=0.0297M
Answer:
0.0297M
Explanation:
We will use the formula M= moles of solute/lites of solution.
First we need to figure out the Moles of the solute, to get this we first need the molar mass of KNO3 (potassimum nitrate).
The Molar Mass of potassimum nitrate is 101.103 g/mol
K - 1 x 39.09
N - 1 x 14.006
O - 3 x 15.999
KNO3 - 101.103 g/mol
Now we get the moles of the solute by doing.
0225g/ 101.103g/mol = 0.00223 mol
Put the answer into the orginal equation to get 0.00223mol / 0.045 L
Which equals to 0.0297M. This is also the correct amount of significant figures.
For the balanced equation shown below, how many grams of CO2 will be
produced from 74.23 grams of CO? CO + Fe3O4 → 3FeO + CO2
Answer:
116.64 g
Explanation:
74.23÷14 This is # of moles .
# of moles for co = 5.302
Then mass of co2 = 116.64
Elements are usually dull, brittle and do not conduct electricity are know as_____.
Points: 46
Answer:
nonmetals. it's one of them
4. Initially, 1 mol of oxygen (assumed to be an ideal gas) has temperature 310 K and volume 12 L. We will allow it to expand to volume 19 L. (a) What would be the final temperature if the gas expands adiabatically
Answer:
490.83 oK
Explanation:
First of all, we better agree on the meaning of the word adiabatically. It means without the loss or gain of heat. So nothing is given up to or taken from the environment.
This also assumes that no change has occurred in the pressure.
T1 = 310 oK
T2 = ?
V1 = 12 L
V2 = 19 L
T1/V1 = T2/V2
310 / 12 = x/19 Multiply both sides by 19
310*19 / 12 = T2 Multiply 310 * 19 on the left.
5890 / 12 = T2 Divide by 12
490.83 = T2
pls answer this it's due today
Answer:
That's pretty easy,if you have a grasp of Elements, Compounds and their Symbols ans Molecular formula.
So, Let's get started!
Our reactions are as follows:
Sodium(Na) + Chlorine(Cl) ---> Sodium chloride(NaCl)Think of a compound that has both Sodium and Chlorine and is very common.
Common salt — Sodium chloride!
Yeah, that's it! It has both Sodium and Chlorine in it's molecular formula. (NaCl)
Magnesium(Mg) + Oxygen(O2) ---> Magnesium oxide(MgO)Now, we have to, somehow, get Magnesium oxide using Oxygen. The best way is: by reacting Magnesium with Oxygen.
Iron(Fe) + Sulfur(S) ---> Iron Sulfide(FeS)Now, we have to get two reactants that react to form Iron Sulfide.
FeS contains only two elements in its formula and that are: Iron(Fe) and Sulfur(S).
So, the best way would be to react Iron(Fe) and Sulfur(S) and get Iron Sulfide (FeS)
Hydrogen(H2) + Oxygen(O2) ---> water(H2O)You must know that water is H2O, that is, a compound of Hydrogen and Oxygen, the easiest way to get H2O as your product would be : by reacting Oxygen and Hydrogen.
How do you break down an element?
Answer:
elements cannot be break downPlease help me with this three questions
Answer:
1. A. Thyroid Gland Function
B. detecting Blood Clots
C. Treating Cancer
2. An example would be how many are used as tracers for diagnostic purposes
3. Beneficial because it gives us ways to eleminate pests, by the sterile insect technique
Number three is kinda iffy a bit difficult to explain it may be explained better in your book.
Which of the following methods will usually cause a reaction to speed up?
Group of answer choices
Removing the catalyst.
Combining the reactants at a lower temperature.
Grinding one of the reactants into a powder.
Reducing the concentration of reactants.
the method that will usually cause a reaction to speed up from the list given is: Reducing the concentration of reactants.
Meaning of ReactionReaction can be defined as the combination of substances or a process where substances acts on each other, where substances changes into different substances.
A reaction can be said to be the event that causes a restructuring or rearrangement of atoms of a substance when it is in contact with another substance.
In conclusion, the method that will usually cause a reaction to speed up from the list given is Reducing the concentration of reactants.
Learn more about Reaction: https://brainly.com/question/26018275
#SPJ2
during hybridization ______.
A) nature selects which organisms will survive and reproduce.
B) the nucleus of a cell is removed.
C) two organisms with desired traits are bred.
D) a single beneficial trait is bred into a species.
Answer:
option C two organisms with desired traits are bred
How does a paper bag wrapped around a hot water bottle create convection?
A chemist heats a gas within a sealed, rigid container. Which statement describes the changes that occur in the gas? (1 point)
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure
increases
-The gas particles move slower and hit the sides of the container with less force, consequently, the pressure decreases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
increases
-The gas particles move faster and hit the sides of the container with more force, consequently, the pressure
decreases
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
An increase in the temperature of a gas increases the collision rate of the molecules of the gas according to the kinetic theory.
With increased kinetic energy, the molecules of the gases collide more frequently with each other and the walls of the container.
The collision creates an increase in the magnitude of pressure inside the container.
More on the kinetic theory of gases can be found here: https://brainly.com/question/15354399?referrer=searchResults
Answer:
C
Explanation:
When a gas is heated in a sealed container, the gas particles move faster and hit the sides of the container with more force leading to an increase in the pressure of the gas.
A force is a push or a pull under the right circumstances anything can exert a force push a notebook or some other object so that it slides across a table or desktop what force causes the notebook to start moving what force causes the notebook to stop moving?
Answer:
the force that you applied caused the notebook to move.the force applied on the notebook by the table causes it to stop moving. this is because after sometime the book uses up the force and later the force you applied is less than that of the force by the table.
Note the mass of copper(1) oxide formula unit 143.091 what is the mass of 8.250 moles of Cu2O
Answer:
The mass of 8.250 moles of Cu2O is 1180.5g
Explanation:
HOW TO CALCULATE MASS OF A SUBSTANCE:
The mass of a substance can be calculated by multiplying the number of moles in the substance by its molar mass as follows:Mass (g) = no. of moles (mol) × molar mass (g/mol)
Molar mass of copper (I) oxide (Cu2O) = 63.5(2) + 16 = 143.09 g/molMass of Cu2O = 8.250 mol × 143.09 g/mol
Mass of Cu2O = 1180.5 g
Therefore, the mass of 8.250 moles of Cu2O is 1180.5 g.
A substance that takes the shape and volume of its container is in this phase is called a liquid
Answer:
liquid matter
Explanation:
giving brainly if correct and explained
Answer:
D.
Explanation:
A concentrated solution is one that has a lot of solute (the substance being dissolved) in the solvent (the substance doing the dissolving). When a solution is concentrated, it means it has a high ratio of solute to solvent, so the answer is D.
Hope this helps.
what makes matter change from one state to another?
Answer: Adding or removing energy from matter
Explanation:
why is xenon monatomic but bromine is diatomic
Why are metals sometimes added to gold?
to make it softer and more malleable
to improve the value of gold
to raise its melting point
to make gold stronger and more durable
what mass does a nuetron have?
Answer:
1 AMU
Explanation:
Protons, neutrons, and electrons: Both protons and neutrons have a mass of 1 amu and are found in the nucleus.
Which of the following is a binary compound?
How to get your crush to like you back
URGENT PLEASE HELP
What most likely happens when a sodium atom comes near an atom having seven valence electrons?
Answer:
7 Electrons
Explanation:
What it is fill its valence shell, it would need to acquire 7 electrons - a difficult task for a metal like sodium that is a known electron-loser. So unlike fluorine and oxygen, sodium acquires a full octet by losing electrons and emptying out its outermost shell.
Hellpppppppppppppppppppppp
Answer:
SnH4
Explanation:
Because the melting point of SnH4 is higher than CH4
what is the difference between hypertonic and hypotonic
What type of mixture is throughly mixing powdered lemonade with water
Answer:
I believe it would be a solution I could be wrong tho
Explanation:
Answer:
a solution
Homogeneous mixtures (solutions)
Explanation:
Lemonade is a special type of mixture called a solution.
...................................................................................................................................................
What type of mixture is made by thoroughly mixing powdered lemonade with water?
Homogeneous mixtures (solutions)
Mixtures with substances dissolved evenly into one another, like pink lemonade powder dissolved in water, are called homogeneous mixtures, or solutions.
Based on the graph, what is the approximate half-life of the reaction shown below
Answer: 2.1 minutes
Explanation: Based on the graph, what is the approximate half-life of the reaction shown below
application of electroplating
Answer:
are you interested in tun
calculate the molarity of a 50.0 ml of a 0.150 m hcl solution when 30.0 ml of water is added.
Answer:
0.09375 M
Explanation:
You want to use the following equation:
M1*V1=M2*V2
Then plug in the 50ml to V1 and 0.15M to M1 and 80ml to V2 (add the 50 and 30). The next thing you want to do is change the mL to liters, since Molarity is moles/liter. Once that is done, solve algebraically for answer.
** Also don't forget to capitalize the M when you mean Molarity, because it is different than m.**
Hope this helps!
