Answer:x rays are electromagnetic waves.
x rays are transverse waves
x rays travel at the speed of light
Explanation:
If a body of mass 10 kg is pushed with a force of 15N, then the acceleration of the body is
Answer:
1.5m/s2
Explanation:
F=ma
a=F/m
a=15/10
a=1.5m/s2
12.0 V car battery has a voltage drop of 3.4 V when the starter draws 93 A of current. What is the resistance of the starter? O 88 m2 84 mg O 80 m2
Answer:
[tex]R_s = 0.093 \Omega[/tex]
Explanation:
Voltage of the car battery = 12.0 V
Voltage drop in the battery = 3.4 V
The remainder of the voltage is the starter voltage, that is:
Starter voltage = Initial battery voltage - voltage drop
Starter voltage = 12.0 - 3.4
Starter voltage, [tex]V_{s}[/tex] = 8.6 V
Current drawn by starter, [tex]I_s[/tex] = 93 A
According to Ohm's law: [tex]V_s = I_s R_s[/tex]
Starter Resistance, [tex]R_s[/tex] = [tex]V_s/I_s[/tex]
[tex]R_s = 8.6/93\\R_s = 0.093 \Omega[/tex]
Apply Newton's first law to music playing on the radio.
Answer: Find the answer in the explanation
Explanation:
The music playing on the radio will be heard through the sound waves coming from the radio.
The travelling wave will obey Newton's first law of motion which state that:
An object or particle will remain at rest or continue its linear motion in a straight line except an external force is applied.
The external force through wind could affect the travelling of the sound waves. Since the wave is longitudinal wave. That is, it needs a medium (air) for its propagation.
Se realiza un experimento en el que se mide el alargamiento de un muelle debido a la acción de una pesa; se trata de comprobar la ley de Hooke. Los datos que se han obtenido son: Medición 1 2 3 4 5 Alargamiento 42.0 48.4 51.3 56.3 58.6 Masa 2 4 6 8 10 El coeficiente de determinación es:
Answer:
m = 1,975 m / kg , b = 38.05 m
Explanation:
In this experiment, the elongation is plotted against the applied mass
getting a straight line
y = m x + b
where b would be the initial length of spring let's calculate the slope for which we use two well separated points
m = (56.3 -48.4) / (8 - 4)
m = 1,975 m / kg
the equation remains
y = 1,975 x + b
for x = 2 kg y = 42.0 m
we substitute in the equation
42 = 1,975 2 + b
b = 42 - 3.95
b = 38.05 m
Rhodes research indicates that people are generally accurate in guessing the ages of unfamiliar persons based on their faces. This research has important implications for
The available options are:
A. bartenders serving alcohol
B. students identifying their professors.
C. Doctors diagnosing cases of schizophrenia.
D. eyewitnesses identifying suspects from a lineup.
Answer:
A. bartenders serving alcohol
Explanation:
This is because of the underage rule concerning sale of alcohol. Thus, there are occasional period in which underage person or a minor will want to buy alcohol, and without necessarily asking for the birth certificate or ID card that contains Age information, it is therefore, necessary for bartenders to be able to tell the age of their unfamiliar customers, by mere looking at them, so as not to sell to a minor.
Hemce, Rhodes research in guessing the age of unfamiliar person has important implications for BARTENDERS SERVING ALCOHOL, because it will guide them to determine Underage or Minor, that want to buy alcohol from them.
A train takes 6 hours to reach Indore from Delhi. If it moves with the speed of 70 km/h, find the distance between Indore and Delhi.
Answer:
Distance = 420 km
Explanation:
Speed = Distance/ Time
Where speed = 70 km/hr and time = 6 hours
Distance = Speed × Time
D = 70 km/hr × 6 hrs
D = 420 km
Answer:
GIVEN DATA :
TIME TAKEN=t=6h
SPEED OF THE TRAIN=v=70km/h
TO FIND:
DISTANCE COVERED=d=?
SOLUTION:
AS WE KNOW THAT
SPEED=DISTANCE COVERED / TIME TAKEN
SPEED × TIME TAKEN = DISTANCE COVERED
70km/h×6h=distance covered
distance covered=420km
The pressure exerted by 15m of liquid is 1500pa.The acceleration due to gravity g=10m/s^2.Calculate the density liquid.
Answer:
1500 divided by 150(15m x 10m/s^2) = 10
Talia is on a trip with some friends. In the first 2 hours , they travel 100 miles. Then they hit traffic and go only 30 miles in the next hour. The last hour of their trip , they drive 75 miles
Answer:
51 miles/hour
Explanation:
Talia is on a road trip with some friends. in the first 2 hours, they travel 100 miles. then they hit traffic and go only 30 miles in the next hour. the last hour of their trip, they drive 75 miles. calculate the average speed of talia’s car during the trip. give your answer to the nearest whole number.
The average speed would be 51 miles/hour.
The average speed of a moving object is defined as the total distance traveled relative to the total time taken fro the journey. Mathematically, it is given as:
total distance traveled/total time taken.
In this case;
Total distance traveled = 100 + 30 + 75 = 205 miles
Total time taken = 2 + 1 + 1 = 4 hours
Therefore;
Average speed = 205/4 = 51.25 miles/hour
To the nearest whole number = 51 miles/hour
An escalator is used to move 25 passengers every minute from the first floor of a department store to the second. The second floor is located 5.30 meters above the first floor. The average passenger's mass is 60 kg. Determine the power requirement of the escalator in order to move this number of passengers in this amount of time.
Please help me quickly!
Answer:
1298.5watt
Explanation:
Power is defined as the rate at which work is done
Expressed mathematically as;
P = F × d/ t; F = force or weight of object ;d is height or distance sustain and t is time covered
Hence for 1 person the power consumption is ;
Note weight =mass× acceleration of free fall due to gravity,g
g is known as 9.8m/S2
Time taken is 1min which is 60 sec
60 ×9.8 × 5.3/60 = 51.94 watt
Hence for 25 persons we have
25 × 51.94 =1298.5watt
1.3kilo watt( kilo is 1000)
The work done by the escalator is 3,080.4 joules and the power requirement of the escalator to move 25 passengers every minute is approximately 51.34 watts.
The Work Done is calculated as:
Force (F) = 60 × 9.8
Distance (d) = 5.30 meters
Work (W) = F × d
Work (W) = (60 × 9.8) × 5.30
Work (W) = 3,080.4 joules
The Power is calculated as:
Time (t) = 1 minute
Power (P) = Work / Tim (t)
Power (P) = 3,080.4 / 60
Power (P) = 51.34 watts
Therefore, the power requirement of the escalator to move 25 passengers every minute is approximately 51.34 watts.
To know more about the work done and power:
https://brainly.com/question/29369495
#SPJ4
Explain the following behaviour of molecules water rises up in a harrow tubes but mercury which is also a liquid falls in a narrow tubes to level below the outside surface
Answer: find the answer in the explanation
Explanation:
The capillarity of water molecules is different from the mercury molecules.
What is capillarity ?
This is the tendency of a liquid substance to rise in a capillary tube.
Molecules water rises up in a harrow tubes because of the force of adhesion between the water molecules and the tube molecules is greater than the force of cohesion between the water molecules. This helps water to wet the tube and rise. While mercury which is also a liquid falls in a narrow tubes to level below the outside surface because the force of cohesion between the mercury molecules is greater than the force of adhesion between the mercury molecules and the tube molecules. Mercury does not wet.
The mass of a certain man is 250g..
I. What is the weight of the man on earth
ii. What is the weight of the man on the moon
I promise to mark u the brainliest, please help me
Answer:
2,450
400
Explanation:
Pls brainliest me
The amplitude of a particle executing simple harmonic motion is 5cm, while its angular velocity is 10 rads -1 . Calculate the magnitude of the maximum acceleration of the particle.
Answer:
a_max = 50 cm/s^2
Explanation:
To find the magnitude of the maximum acceleration of the particle, you take into account the equation of motion in a simple harmonic motion:
[tex]x=Acos(\omega t)[/tex]
ω: angular velocity = 10 rad/s
A: amplitude = 5 cm
The acceleration is given by:
[tex]a=\omega^2 x[/tex]
and the maximum acceleration is obtained when the cosine function is maximum, that is, when cos(wt) = 1. Then, you have:
[tex]a_{max}=\omega^2 x_{max}=\omega^2A[/tex]
Then, you replace the values of w and A in order to calculate a_max:
[tex]a_{max}=(10rad/s)^2(5cm)=50\frac{cm}{s^2}[/tex]
hence, the maximum acceleration is 50 cm/s^2
A car starts from rest and develops an acceleration of 2 m/s2. If the distance covered by the car during its motion is 100m, what is the final velocity attained by the car?
Answer:
20
Explanation:
because I am always right yo bro be like me
Question 1 of 25
2 Points
What is the kinetic energy of a 5-kg cat chasing a mouse across the yard at 2
m/s?
A. 98 J
B. 10 J
C. 2J
D. 20 J
SUBMIT
Explanation:
K = 5kg[tex](2 m/s)^{2}[/tex]/2 = 10 J
A remote controlled plane accelerates to a velocity of 21.0 m/s while covering a distance of 87.4 m in 6.11 s. What was the plane's initial velocity?
Answer:
7.61 m/s
Explanation:
Given:
Δx = 87.4 m
v = 21.0 m/s
t = 6.11 s
Find: v₀
Δx = ½ (v + v₀) t
87.4 m = ½ (21.0 m/s + v₀) (6.11 s)
v₀ = 7.61 m/s
71.6
Δx = 87.4 m
v = 21.0 m/s
t = 6.11 s
Find: v₀
Δx = ½ (v + v₀) t
87.4 m = ½ (21.0 m/s + v₀) (6.11 s)
v₀ = 7.61 m/s
A piano with a mass of 130 kg is lifted 10m above the ground in 5 s by a crane.
What is the power used by the crane
[tex]power = 2548 \: watt \\ solution \\ mass = 130 \: kg \\ distance = 10m \\ time = 5 \: sec \\ power = \frac{w}{t} \\ \: \: \: \: \: \: \: \: \: \: = \frac{f \times d}{t} \\ \: \: \: \: \: \: \: \: = \: \frac{m \times g \times d}{t} \\ \: \: \: \: \: \: \: \: \: = \frac{130 \times 9.8 \times 10}{5} \\ \: \: \: \: \: \: \: \: = \frac{12740}{5} \\ \: \: \: \: \: = 2548 \: watt \\ hope \: it \: helps[/tex]
What does the phrase "1 meter per second per second" means? A. The velocity of an object can increase by 1 meter per second, for every minute of time measured. B. The velocity of an object can increase by 1 meter per second, for every second of time measured. C. The velocity of an object can increase by 1 meter per second.
Explanation:
"1 meter per second per second" means acceleration of an object. It is equal to the rate of change of velocity. Its SI unit is [tex]m/s^2[/tex].
It is simply given by :
[tex]a=\dfrac{dv}{dt}[/tex]
dv is change in velocity
dt is small interval of time
"1 meter per second per second" means that the velocity of an object can increase by 1 meter per second.
How does charging by conduction work?
Answer:
During charging by conduction, both objects acquire the same type of charge. If a negative object is used to charge a neutral object, then both objects become charged negatively. ... In this case, electrons are transferred from the neutral object to the positively charged rod and the sphere becomes charged positively.
Hi can someone help with this:
1) The volume of a gas is 4 m3 when its pressure is 200 kPa. Assuming the temperature does not change, calculate its pressure when the volume is 3 m3 .
2) The pressure of a gas is 1.8 × 105 Pa when its volume is 80 cm3 . Its temperature is constant. Calculate its volume when the pressure becomes 1.2 × 105 Pa.
I'd appreciate if there was working shown
Answer:
2.67 x10 power5 PascalExplanation:
pv=nRT n, R,T--constantso, p1v1=p2v2
p2=p1xv1/v2
Drag each tile to the correct box. Arrange the steps in order to describe what happens to a gas when it cools. The particles of gas move slower. The gas changes to a liquid. The gas loses thermal energy. The space between the gas particles decreases. ↓ ↓ ↓
Answer:
Ok, as the gas starts to cool down, the kinetic energy of the particles starts to decrease, so the first thing that happens is:
"the gas loses thermal energy" (as the gas cools down, the temperature decreases, so it loses thermal energy)
Now, the kinetic energy must decrease, so now:
"the particles of gas move slower".
Then, as the particles start to move slower, they start to get closer to eachother, then we have:
"The space between the gas particles decreases."
As the particles start to get close to eachother, the density of the gas starts to increase, until a point where we get to the condensation point, here we have a change of phase and the gas changes to a liquid, so here we have:
"The gas changes to a liquid."
Answer:
a
Explanation:
Two people try to lift a heavy box. Jack pulls upward with a 100-newton
force. Jill pulls upward with a 50-newton force, but neither person moves the
box.
Compare the amount of work done on the box by Jack and Jill.
OA) Jack did twice as much work as Jill.
OB) Jack did fifty times more work than Jill.
OC) Jack and Jill did the same amount of work.
Answer:
A ( Jack did twice as much work as Jill
Explanation:
Identical point charges (+50 x 10 power -6C) are placed at the corners of a square with sides of 2.0-m length. How much external energy is required to bring a fifth identical charge from infinity to the geometric center of the square?
Answer:
636.4 J
Explanation:
The potential energy between one of the charges at the corner of the square and the fifth identical charge is U = kq²/r where q = charge = +50 × 10⁻⁶ C and r = distance from center of square. = √2 m (since the midpoint of the sides = 1 m, so the distance from the charge at the corner to the center is thus √(1² + 1²) = √2)
Since we have four charges, the additional potential energy to move the charge to the centre of the square is U' = 4U = 4kq²/r
U' = 4kq²/r
= 4 × 9 × 10⁹ Nm²/C² (+50 × 10⁻⁶ C)²/√2 m
= 900 Nm²/√2 m
= 636.4 J
The total external energy required is 636.4 J.
Electric potential energy:
According to the question, a square of side a = 2m has 4 identical charges on the corners with charge Q = 50×10⁻⁶C.
A fifth identical charge is brought at the geometric center of the square. The geometric center is at the center of the diagonal:
[tex]r=\frac{a}{\sqrt{2} }=\sqrt{2}\;m[/tex]
The potential energy is a state function which means that it depends on the initial and final position.
Now the energy required is equal to the change in potential energy
[tex]\Delta U=\frac{1}{4\pi\epsilon_o}\frac{4Q^2}{r}\\\\\Delta U=\frac{4\times9\times10^9\times(50\times10^{-6})^2}{\sqrt{2} } \\\\\Delta U=636.4\;J[/tex]
Learn more about electric potential energy:
https://brainly.com/question/13003272?referrer=searchResults
Please give me concept to solve this.
Answer:
The difference in tension, between adjacent sections of the pull cable at the given conditions is 17.701 kN
Explanation:
We take the cars as moving upwards such that the resultant pulling force on the car, F, along the cable is given by the relation
[tex]F_{car}[/tex] = Upward tension force, [tex]Tension_{(upwards)}[/tex] - Downward tension force, [tex]Tension_{(downwards)}[/tex] - Component of the weight of the car along the taut cable
The parameters given are;
Mass of car, m = 2750 kg
Angle of inclination of taut cables, θ = 35°
The upward acceleration of the car, a = 0.81 m/s²
Given that the weight is acting vertically downwards, we have;
Component of the weight of the car along the taut cable = m × g × sin(θ)
∴ Component of the weight of the car along the taut cable = 2750 × 9.81 × sin (35°) = 15473.66 N
We therefore have;
[tex]F_{car}[/tex] = [tex]Tension_{(upwards)}[/tex] - [tex]Tension_{(downwards)}[/tex] - 15473.66 N
[tex]F_{car}[/tex] = m × a = 2750 × 0.81 = [tex]T_{upwards}[/tex] - [tex]T_{downwards}[/tex] - 15473.66
∴ [tex]Tension_{(upwards)}[/tex] - [tex]Tension_{(downwards)}[/tex] = 2750 × 0.81 + 15473.66 = 17701.16 N
Hence the difference in tension, [tex]Tension_{(upwards)}[/tex] - [tex]Tension_{(downwards)}[/tex] between adjacent sections of the pull cable if the cars are at the maximum permissible mass and are being accelerated up the incline = 17701.16 N or 17.701 kN.
A train starts from its station and it
velocity reaches 200m/s in 5
seconds. What is its acceleration?
a. 400m/s
b. 40m/s2
c. 4.5m/s2
d. Initial velocity is missing
Answer:
b. 40m/s2
Explanation:
Acceleration is calculated by dividing velocity over time. Therefore 200m/s by 5s equals 40m/s2
Answer:
B
Explanation:
v = vo + at
200 = 0 + a*5
200 = 5a
a = 200/5 = 40 m/s²
initial velocity (vo) is 0 because it says it start from station
HELLO.
Hope you are having a nice morning/day/night. PLEASE HELP.
Explain why water storage tanks in houses are erected as high as possible
Answer:
Hello! Thanks! I hope you are too! hope this helps!
Explanation:
The primary reason is to create more water pressure. ... If a municipal water tank is elevated to more than a hundred feet above the ground, there is an increase of . 43 psi per foot. A tank that has been elevated to an appropriate height can create water pressure similar to that created by a large pump
Answer:
✌✌✌✌✌✌✌✌✌✌✌
Explanation:
The primary reason is to create more water pressure. ... If a municipal water tank is elevated to more than a hundred feet above the ground, there is an increase of . 43 psi per foot. A tank that has been elevated to an appropriate height can create water pressure similar to that created by a large pump.
Earth is a dynamic system what exactly does this mean
Answer:
The answer to the following question is given below.
Explanation:
This means a mixture of interconnected, interlinked, or interactive elements that establish the collaborative entity or entities.
The Earth system manages to maintain its very presence on even a macro level as well as processes in general thru the engagement of all its elements. This affects such as erosion, whereas others happen unexpectedly, such as an earthquake. It is crucial to keep our lifestyle in mind that we can recognize all such adjustments as well as their implications.When is the magnitude of the acceleration of a mass on a spring at its maximum value?
A.
when the mass has a speed of zero
B.
when the mass is moving upward
C.
when the mass has no displacement
D.
when the mass is 1
2 x
Answer:
D
Explanation:
Now we know that Force is the rate of change of momentum meaning
F= mv/t
But
mv/t = Ke
v/t = ke/m
a= ke/m
Where a is acceleration
K is constant of proportionality of tension on a spring
e is the extension substended by a string.
From the formula of acceleration we can see that as mass decreases acceleration increases so we can see that m = 1
We would have a maximum value of acceleration.
The Answer Is....:
D.
A cork weigh 2.5 gf in air. When tied to a sinker , the total weight is 20 gf in water. If the sinker alone weighs 25gf in water, find the density of the cork
Answer:
0.333
Explanation:
Weight of the sinker in water = 25gf
Weight of cork in air and sinker in water = 25gf + 2.5gf
= 27.5gf
Weight of the cork and sinker in water = 20gf
Loss of weight of cork in water = 27.5- 20 = 7.5gf
Rd of cork = weight of cork in air/ loss of weight of cork in water
= 2.5/7.5
= 1/3
= 0.333
Hence the Relative density of the cork is 0.333
please answer this question first one to answer the right answer will be marked brainiest
Answer: Force per unit area. Explanation: P = 25/20. P = 5/4 Pascal or 1.25 Pascal
Explanation: is this what you were looking for
How many meters is in 32 km
Answer:
32000 m
Explanation:
1000m in 1 km, so 32000m in 32 km.
Answer:
32000m
Explanation:
1km=1000m
so 32 kn is equals to 32000m
