Which two dimsoel figure is always a quadiretal

The age of Layla who youngest of four siblings is 18 years old

The age of 4 sibling are in consecutive even integers

Age of 1st sibling = x

Age of 2nd sibling = x + 2

Age of 3rd sibling = x + 4

Age of 4th sibling = x + 6

Sum of the sibling age = 84

x + x + 2 + x + 4 + x + 6 =84

4x + 12 = 84

4x = 84 -12

4x = 72

x = 18

Layla is youngest  sibling hence her age will be 18 years

To know more about age click here :

https://brainly.com/question/29963980

#SPJ4

The question is incorrect the correct question is :

Layla is the youngest of four siblings whose ages are consecutive even integers. If the sum of their ages is 84, find Layla's age

On a scatter plot, the vertical distance between the dot for the actual score and the regression line represents the residual or the error.

The regression line is a line that is drawn through the scatter plot of two variables (usually denoted as x and y) that shows the average relationship between those variables. It is the line that minimizes the sum of the squared errors between the observed y-values and the predicted y-values for each x-value.

The actual score is the observed y-value for a given x-value, and the predicted score is the value of y predicted by the regression line for that same x-value. The difference between the actual score and the predicted score is the residual, or the error.

The residual can be positive or negative, depending on whether the actual score is above or below the regression line, respectively. The size of the residual represents how far away the actual score is from the predicted score, in units of the y-variable.

Thus, the vertical distance between the dot for the actual score and the regression line represents the residual or the error, which is the difference between the actual score and the predicted score.

To learn more about regression line visit

https://brainly.com/question/29753986

#SPJ4

The boat is either about 2.334 miles or 2.666 miles from lighthouse B, depending on whether it sailed to the left or to the right of the line AB.

Let's draw a diagram to help visualize the problem. Let A and B be the positions of the lighthouses, and let C be the position of the boat after sailing 5 miles from A. Let x be the distance from C to B that we want to find, and let θ be the angle ACB.

Since the bearing of the boat from B is N65°E, we know that the angle ACB is (180° - 65°) = 115°. Also, since ACB is a straight line, we have

cos(115°) = x/8

Solving for x, we get

x = 8 cos(115°) ≈ 2.334 miles

To know more about distance here

https://brainly.com/question/23419495

#SPJ4

The integral [1,3] f(2x)dx=(1/2) ∫[2,6] f(x) dx.

What is integral?

In calculus, an integral is a mathematical operation that represents the area between a function and the x-axis on a graph. It is a way to calculate the area under a curve or between two curves.

We can use the substitution method to solve the integral. Let u = 2x, which means du/dx = 2 or du = 2dx.

Then we can rewrite the integral as:

∫[1,3] f(2x) dx = (1/2) ∫[2,6] f(u) du (substituting u = 2x and changing the limits of integration)

Since F'(x) = f(x), we can rewrite the right-hand side of the equation as:

(1/2) [F(u)] [2,6]

= F(6)/2 - F(2)/2 (using the definition of the antiderivative)

= (1/2) [F(6) - F(2)]

= (1/2) ∫[2,6] f(x) dx (using the definition of the antiderivative again)

So the final answer is:

∫[1,3] f(2x) dx = (1/2) ∫[2,6] f(x) dx.

To learn more about integral visit:

https://brainly.com/question/22008756

#SPJ4

The average person in an industrialized country uses hundreds of kilograms of mineral resources in a year, and this number is only set to increase as our demand for products and technology continues to grow.

To determine the exact amount of mineral resources used by an average person in an industrialized country in a year, we need to consider the types of minerals used and their respective quantities. According to the US Geological Survey, the most commonly used minerals in the US include copper, iron, aluminum, and zinc, among others.

In 2020, the US per capita consumption of copper was 2.5 kilograms, iron and steel were 505 kilograms, aluminum was 21.5 kilograms, and zinc was 0.024 kilograms. Therefore, the total mineral consumption per capita in the US in 2020 was approximately 529 kilograms.

It's worth noting that this number only accounts for a few commonly used minerals and doesn't include other minerals such as gold, silver, platinum, and more. Additionally, this number varies across different countries based on their industrialization levels and resource availability.

To know more about average here

https://brainly.com/question/16956746

#SPJ4

To calculate the standard deviation of a set of data, you need to have the individual data values. The individual data values are the numeric values that make up the data set.

To calculate the standard deviation, you need to perform the following steps:

Calculate the mean (average) of the data set.

For each data value, subtract the mean from the data value.

Square each of the differences calculated in step 2.

Sum the squared differences calculated in step 3.

Divide the sum of the squared differences by the number of data values minus 1 (this is called the "sample" standard deviation) or by the total number of data values (this is called the "population" standard deviation).

Take the square root of the result obtained in step 5 to obtain the standard deviation.

When calculating the standard deviation, it's important to use the correct number of decimal places and units of measurement to ensure accuracy.

What is the definition of accuracy?

Accuracy refers to how close a measured or calculated value is to the true or accepted value.

To learn more about the accuracy visit:

brainly.com/question/13099041

#SPJ11

The class width of a frequency distribution is the difference between the upper class limit of a class and the lower class limit of the same class. In other words, it represents the range of data values included in a particular class.

For example, suppose we have a frequency distribution with the following classes: 0-9, 10-19, 20-29, 30-39, and 40-49.

The class width of this frequency distribution would be the same for all classes and would be equal to 10. This is because the upper class limit of each class is 9, 19, 29, 39, and 49, respectively, and the lower class limit of each class is 0, 10, 20, 30, and 40, respectively. Therefore, the difference between the upper class limit and lower class limit for each class is 9, 9, 9, 9, and 9, respectively, giving a class width of 10.

In the given problem, the first class is 10-19 and the second class is 20-29. Therefore, the lower class limit of the first class is 10 and the upper class limit of the second class is 29.

Therefore, the class width is the difference between the upper class limit of the second class (29) and the lower class limit of the first class (10), which is equal to 29 - 10 = 19.

So the correct answer is 19.

To know more about frequency distribution, visit the link given below:

https://brainly.com/question/24973035

#SPJ4

Answer:

2 m/s

Step-by-step explanation:

To find the speed of the ball, we can use the formula:

Speed = Distance / Time

Given that the distance the ball moves is 3 m and the time it takes is 1.5 s, we can substitute those values into the formula to get:

Speed = 3 m / 1.5 s

Simplifying the expression by dividing 3 by 1.5, we get:

Speed = 2 m/s

Therefore, the speed of the ball is 2 m/s.

Statement iii is correct.

The test statistic is significant at the 0.03 level of significance, which is equivalent to a 97% confidence level.

Therefore, we can conclude that a 90% confidence interval for the difference in means will not contain the value 0 (Option I is false). Similarly, a 95% confidence interval for the difference in means will also not contain the value 0 (Option II is false). However, we cannot make any conclusion about a 99% confidence interval for the difference in means.

In general, as the level of confidence increases, the width of the confidence interval also increases. Therefore, it is possible that a 99% confidence interval for the difference in means may include the value 0 even though the 97% level of significance rejects the null hypothesis.

So, the only statement that must be true is III. A 99% confidence interval for the difference in means may or may not contain the value 0.

Learn more about p-value here

https://brainly.com/question/27198724

#SPJ4

A) The probability percentage that 121 or more Americans in the survey are afraid to fly is 13.57

B) The probability percentage that 165 or more Americans in the survey are afraid to fly is 0

C) What is the probability percentage that 8% or less of the Americans surveyed answered they were afraid to fly is 1.36

Percentage of people afraid to fly = 10%

P = 0.10

Total number of people  = 1100

Standard deviation = p (1 - p) / n

σ = 0.10(1 -0.1)/1100

σ = 0.00905

z is standard normal table

A) p (ρ ≥ [tex]\frac{121}{1100}[/tex]) = p [tex](\frac{z\geq\frac{121}{1100} }{0.00905} )[/tex]

p (ρ ≥ [tex]\frac{121}{1100}[/tex]) = p ( z ≥ 1.10)

p (ρ ≥ [tex]\frac{121}{1100}[/tex]) = 13.57 %

B) p (ρ ≥ [tex]\frac{165}{1100}[/tex] ) = p[tex](\frac{z\geq\frac{165}{1100} - 0.10 }{0.00905} )[/tex]

p (ρ ≥ [tex]\frac{165}{1100}[/tex] ) = p (z ≥ 5.52)

p (ρ ≥ [tex]\frac{165}{1100}[/tex] ) = 0

C) p (ρ ≤ 0.08 ) = p[tex](\frac{z\leq 0.08 - 0.10 }{0.00905} )[/tex]

p (ρ ≤ 0.08 ) = p (z ≤ -2.21)

p (ρ ≤ 0.08 )  = 1.36

To know more about probability  click here :

https://brainly.com/question/30149325

#SPJ4

The left right hand derivative is 3.

The left hand derivative is 2.

The function is not differentiable at x = 1.

When x < 1,

given that the function is, f(x) = 2x² - 2x - 1

Differentiating with respect to 'x' we get, f'(x) = 4x - 2

When x [tex]\geq[/tex] 1,

given the function is, f(x) = 3x - 3

Differentiating with respect to 'x', f'(x) = 3

Now, left hand derivative,

f'(1 -) = (4x - 2) at 1 = 4*1 - 2 = 4 - 2 = 2

f'(1+) = 3

Since, left hand derivative and right hand derivative for given function at x =  1 is not equal, so the function is not differentiable at x = 1.

To know more about differentiable here

https://brainly.com/question/15406243

#SPJ1

Based on the given information, we know that the arrival rate is 9 customers per hour and the service rate is 14 customers per hour. Since the arrival and service distributions are not known, we cannot use the m/m/1 formulas to calculate the average waiting time and total time spent in the system.

However, we can still use the Little's Law formula to relate the average number of customers in the system to the average waiting time. Little's Law states that the average number of customers in the system (N) is equal to the product of the arrival rate (λ) and the average time spent in the system (T), or N = λT.

Since we want to find the total time spent in the system, we can rearrange the formula to solve for T. Thus, T = N / λ.

We know from the given information that the average waiting time in the line is 18 minutes. Therefore, the average time spent in the system for a customer is T = 18 minutes + (1/14 hour), which is equal to 1.9 hours.

To calculate the total time spent in the system, we need to add the waiting time to the service time. Since the service rate is 14 customers per hour, the service time per customer is 1/14 hour or approximately 4.3 minutes. Thus, the total time spent in the system is approximately 22.3 minutes or 0.37 hours.

In summary, the average time spent in the system for a customer is 1.9 hours, and the total time spent in the system is approximately 22.3 minutes or 0.37 hours.

Learn more about arrival rate here:

brainly.com/question/30036732

#SPJ11

The appropriate test to compare the satisfaction scores before and after the introduction of the new service is a paired t-test or a dependent t-test.

This is because the same group of customers is being surveyed before and after the introduction of the new service. The two samples are not independent of each other, but are related or dependent because they are measuring the same thing in the same individuals at different points in time.

A paired t-test compares the means of two related samples and determines whether the difference between them is statistically significant or simply due to chance. In this case, the null hypothesis would be that there is no significant difference in customer satisfaction before and after the introduction of the new service, and the alternative hypothesis would be that there is a significant difference.

To know more about paired t-test,

https://brainly.com/question/15870238

#SPJ11

Answer:

2nd one

6th one

Step-by-step explanation:

Hope this helps! Pls give brainliest!

Step-by-step explanation:

The sum of the measures insiqe the quadriateral = 360

   one is angle o = 111   and two of them aare 90 degrees each

so    360 - 111 - 90 - 90 = x = 69 degrees

The Moellers had 1,500 miles remaining to reach their destination. On the first day, the Moellers drove 1/2 (or 0.5) of the 3,000 miles, which is 1,500 miles. This means they had 1,500 miles remaining to reach their destination.

On the second day, they drove 1/4 (or 0.25) of the remaining 1,500 miles, which is 375 miles. Therefore, they had 1,125 miles remaining to reach their destination after driving 1/2 on the first day and 1/4 on the second day.

Based on the given information, the Moellers drove 1/3 of the distance on the first day and 1/4 of the remaining distance on the second day. Let's calculate the remaining distance to reach their destination:

Total distance: 3,000 miles

First day: 1/3 of 3,000 miles = 1,000 miles

Remaining distance after the first day: 3,000 - 1,000 = 2,000 miles

Second day: 1/4 of 2,000 miles = 500 miles

Remaining distance after the second day: 2,000 - 500 = 1,500 miles

So, the Moellers had 1,500 miles remaining to reach their destination.

Visit here to learn more about distance brainly.com/question/15172156
#SPJ11

The average rate of change for % of drivers in an accident between 20 -  100 practice hrs is [tex]-0.2[/tex].

To find the average rate, we will to calculate the slope of the line passing through the points (20, 20%) and (100, 4%).

Using the formula for slope, we get:

Slope = (4% - 20%) / (100 - 20)

Slope = -16% / 80

Slope = -0.2

The average rate of change for the percent of drivers in an accident from states that require between 20 and 100 practice hours is -0.2 which means that for every additional 10 practice hours required by a state, the percent of drivers in an accident decreases by an average of 2%.

Missing table:

Practice hours 20 40 60 80 100

Percent of drivers 20% 19% 18% 10% 4%

Read more about rate of change

brainly.com/question/8728504

#SPJ4

Therefore, based on the inspection of the sample, it can be estimated that 8% of the articles in the original shipment may be defective.

The answer  is that the probable percentage of defective articles in the original shipment can be estimated using the formula:

Probable percentage of defective articles = (Number of defective articles in sample / Sample size) x 100

In this case, the number of defective articles in the sample is 4, and the sample size is 50. Plugging these values into the formula, we get:

Probable percentage of defective articles = (4/50) x 100 = 8%

Therefore, based on the inspection of the sample, it can be estimated that 8% of the articles in the original shipment may be defective.


Sampling is a technique used to estimate the characteristics of a large population by examining a smaller subset of it. In this case, a sample of 50 articles was inspected to estimate the probable percentage of defective articles in the original shipment of 500 articles. The number of defective articles in the sample was found to be 4, which represents 8% of the sample size. This percentage can then be used to estimate the probable percentage of defective articles in the entire shipment. However, it is important to note that the estimate may not be completely accurate, as the sample may not be fully representative of the entire population.

To know more about Sampling  visit:

brainly.com/question/16797504

#SPJ11

the probabilities for each event are Red ball: 1/5, White ball: 7/20, Yellow ball: 9/20 by using formula of  probability =possible outcome /total outcomes

To find the probability of a given event, we need to determine the number of successful outcomes and divide that by the total number of possible outcomes.

In this case, the event we want to find the probability for is not specified, so I will provide the probabilities for each color:

1. Probability of drawing a red ball:

Number of successful outcomes: 4 red balls
Total number of outcomes: 4 red + 7 white + 9 yellow = 20 balls

Probability of drawing a red ball = (Number of red balls) / (Total number of balls) = 4/20 = 1/5

2. Probability of drawing a white ball:

Number of successful outcomes: 7 white balls

Probability of drawing a white ball = (Number of white balls) / (Total number of balls) = 7/20

3. Probability of drawing a yellow ball:

Number of successful outcomes: 9 yellow balls

Probability of drawing a yellow ball = (Number of yellow balls) / (Total number of balls) = 9/20

To know more about Probability Visit:

https://brainly.com/question/30034780

#SPJ11

Answer: 3.743324

Step-by-step explanation:

Answer:

Step-by-step explanation:

To match each term to the corresponding probability of it snowing tomorrow, we can use the following definitions:

Likely means that the event has a high chance of happening, so the probability is close to 1. For example, P(snow) = 0.9 means that it is very likely to snow tomorrow.

Unlikely means that the event has a low chance of happening, so the probability is close to 0. For example, P(snow) = 0.1 means that it is very unlikely to snow tomorrow.

Certain means that the event will definitely happen, so the probability is exactly 1. For example, P(snow) = 1 means that it will surely snow tomorrow.

Impossible means that the event will never happen, so the probability is exactly 0. For example, P(snow) = 0 means that it will not snow tomorrow at all.

Using these definitions, we can match each term to the corresponding probability as follows:

Likely: P(snow) > 0.5

Unlikely: P(snow) < 0.5

Certain: P(snow) = 1

Impossible: P(snow) = 0

The test formula is t = (x₁ - x₂) / √(s₁²/n₁) + (s₂²/n₂))

The rejection region for the test is t < -1.971 or t > 1.971.

The question involves the concepts of hypothesis testing and the two-sample t-test.

Hypothesis testing is a statistical method used to make decisions about a population parameter based on a sample of data. In this case, we are interested in comparing the population mean wearing times for old braces and new bands.

The two-sample t-test is a statistical test used to determine if there is a significant difference between the means of two independent samples. The test involves calculating a test statistic (t-value) that measures the difference between the sample means, relative to the variation within the samples.

Here we have

Two hundred children were randomly assigned, 100 to each group.

A summary of the data is given below.

Old Braces: n₁ = 100, sample mean = 425, s₁ = 45 days;

New Bands: n₂ = 100, sample mean = 385, s₂ = 60 days;

You are interested in conducting a test to determine if the population mean wearing times differ using α = 0.10.

(i) The research hypothesis can be framed as:

H₀ : The population mean wearing times for old braces and new bands are equal.

Hᵃ: The population mean wearing time for old braces and new bands are not equal.

(ii) The test formula for comparing the population mean wearing times of two independent samples can be expressed as:

t = (x₁ - x₂) / √(s₁²/n₁) + (s₂²/n₂))

Where x₁ and x₂ are the sample means, s₁ and s₂ are the sample standard deviations, and n₁ and n₂ are the sample sizes.

(iii) To find the rejection region for the test, we first need to determine the degrees of freedom (df), which can be calculated as:

df = (s₁²/n₁+ s₂²/n₂)² / [(s₁²/n₁)² / (n₁ -1) + (s₂²/n₂)² / (n₂ -1)]

Using the given values, we get:

df = (45²/100 + 60²/100)² / [(45²/100)² / 99 + (60²/100)² / 99] = 185.98

Since we have two tails in the test and an alpha level of 0.10, we need to split the alpha level between the two tails.

Therefore, we can find the critical t-values using a t-distribution table with 185 degrees of freedom and an alpha level of 0.05 (half of 0.10).

For a two-tailed test at an alpha level of 0.05, the critical t-values are approximately ±1.971.

Thus, The rejection region for the test is t < -1.971 or t > 1.971. If the calculated t-value falls outside this range, we reject the null hypothesis in favor of the alternative hypothesis and conclude that the population mean wearing times for old braces and new bands are not equal.

Therefore,

The test formula is t = (x₁ - x₂) / √(s₁²/n₁) + (s₂²/n₂))

The rejection region for the test is t < -1.971 or t > 1.971.

Learn more about Hypothesis at

https://brainly.com/question/29519577

#SPJ4

Step-by-step explanation:

A. 1/6 + 1/2 = 4/6 = 2/3 (between 0 and 1)

B. 1/6 + 1/6 = 2/6 = 1/3 (between 0 and 1)

C. 1/6 (between 0 and 1)

D. 1/6 * 1/6 = 1/36 (between 0 and 1)

So, all of the options A, B, C, and D could represent the probability of a simple event as they are between 0 and 1?

The range of the number of heads we can expect with 95% confidence is:

Range = 37.5 +/- 8.49

Range = (29.01, 45.99)

The expected number of heads when flipping a fair coin is equal to the probability of getting a heads, which is 0.5, multiplied by the number of flips.

The expected number of heads in 75 flips is:

Expected number of heads = 0.5 × 75 = 37.5

The standard deviation for the number of heads can be calculated using the formula:

Standard deviation = [tex]\sqrt{(n \times p \times (1-p))[/tex]

n is the number of trials (75 in this case) and p is the probability of success (getting a heads, which is 0.5).

The standard deviation for the number of heads in 75 flips is:

Standard deviation = [tex]\sqrt{(75 \times 0.5 \times (1-0.5))[/tex] = [tex]\sqrt{(18.75)[/tex] = 4.33 (rounded to two decimal places)

The range of the number of heads that can be expected with a certain level of confidence can be calculated using the formula:

Range = z × standard deviation

z is the number of standard deviations from the mean that corresponds to the desired level of confidence.

If we want to be 95% confident that the true number of heads falls within the range, we use a z-score of 1.96, which corresponds to the 95% confidence level.

The range of the number of heads we can expect with 95% confidence is:

Range = 1.96 × 4.33 = 8.49 (rounded to two decimal places)

So we can expect to get around 37.5 heads, give or take 8.49.

For similar questions on Range

https://brainly.com/question/24326172

#SPJ11

The z-score for the value 63.49 is approximately 0.24.

What is statistics?

Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data.

Yes, it is possible to calculate a z-score for the value 63.49 assuming that the data follows a normal distribution.

The z-score measures the number of standard deviations a data point is away from the mean of the distribution. To calculate the z-score, we first need to calculate the mean and standard deviation of the dataset.

The mean can be calculated by adding up all the values and dividing by the total number of values:

Mean = (59 + 60 + 61 + 62 + 62 + 63 + 63 + 63 + 64 + 64 + 65 + 66 + 67 + 68) / 14 = 63

The standard deviation can be calculated using the following formula:

Standard deviation = sqrt((1/N) * sum((xi - x_mean)²))

where N is the number of values, xi is each value in the dataset, and x_mean is the mean of the dataset.

Using this formula, we can calculate the standard deviation of the dataset:

Standard deviation = sqrt((1/14) * ((59 - 63)² + (60 - 63)² + ... + (68 - 63)²))

Standard deviation ≈ 2.02

Now we can calculate the z-score for the value 63.49 using the following formula:

z-score = (x - x_mean) / standard deviation

where x is the value we want to calculate the z-score for.

z-score = (63.49 - 63) / 2.02 ≈ 0.24

Therefore, the z-score for the value 63.49 is approximately 0.24.

To learn more about statistics from the given link:

https://brainly.com/question/28053564

#SPJ4

we first need to figure out how long the entire 10k race will take the runner.

Since the runner has completed 30% of the race in 20 minutes, we can use that information to estimate the total time it will take the runner to complete the entire race.

To do this, we can use a proportion. If the runner completed 30% of the race in 20 minutes, we can set up the equation: 30/100 = 20/x, Here, x represents the total time it will take the runner to complete the race. To solve for x, we can cross-multiply:

30x = 100 * 20

30x = 2000

x = 2000/30

x ≈ 66.67

So, the runner will complete the entire 10k race in approximately 66.67 minutes. Next, we need to determine whether the runner can maintain the same pace for the entire race. If the runner can maintain the same pace, we can use the information we have to estimate the runner's final time.

If the runner completed 30% of the race in 20 minutes, we can use that to calculate how long it will take the runner to complete the remaining 70% of the race. To do this, we can set up the equation: 30/100 = 20/x, Solving for x, we get: x = 20 * 100 / 30, x ≈ 66.67/3, x ≈ 22.22 .

So, the runner will complete the remaining 70% of the race in approximately 22.22 minutes if she can maintain the same pace. Adding this time to the 20 minutes the runner has already completed, we get: 20 + 22.22 = 42.22,

Therefore, if the runner can maintain the same pace, her final time for the 10k race will be approximately 42.22 minutes.

To know more about equation click here

brainly.com/question/649785

#SPJ11

Answer:

1.5

Step-by-step explanation:

20/20 = 3

30/20 = 1.5

Only options I and III are (C)'s correct responses.

I. k-fold cross-validation requires fitting the model k times, whereas LOOCV requires fitting the model n times. Since k > n, k-fold cross-validation is more efficient computationally than LOOCV.

II. k-fold cross-validation has an advantage over LOOCV in bias reduction since each training set is a random sample of the data and tends to reduce bias.

III. LOOCV has an advantage over k-fold cross-validation in variance reduction since LOOCV uses almost all the data to fit the model for each test observation, resulting in lower variance in the test error estimate. In contrast, k-fold cross-validation uses only a subset of the data for each training set, which can lead to higher variance in the test error estimate.

In conclusion, assertions I and III are valid, and the proper response is (C) I and III alone.

To know more about validation visit :

https://brainly.com/question/30076094

#SPJ4

The area of the given shape above would be = 169m² while the perimeter of the shape = 52m

To calculate the area of the given shape, the formula that should be used is given below;

Area = a²

where;

a = 13m

area = 13× 13 = 169m²

The perimeter of the shape = 2(a+b)

= 2(13+13)

= 2×26

= 52 m

Therefore, the perimeter and the area of the shape above would be = 52m and 169m² respectively.

Learn more about area here:

https://brainly.com/question/28470545

#SPJ1