Which two of the following statements about protein synthesis are FALSE? Proteins are always translated as linear polypeptides, beginning from the amino terminus, but may be cleaved or joined afterward. The sequence of amino acids in a polypeptide is specified by ribosomal RNA. The sequence information in proteins can be transferred back into DNA by reverse transcriptase. According to the "sequence hypothesis", the structure and properties of a protein are determined by its primary amino-acid sequence. In eukaryotic cells, polypeptide synthesis takes place on ribosomes in the cytoplasm. ОО Genes and the polypeptides they encode are colinear: that is, the order of missense mutations in a recombination map is the same as the order of the affected amino acids.

Answers

Answer 1

False statements of protein synthesis are: The sequence of amino acids in a polypeptide is specified by ribosomal RNA.  According to the "sequence hypothesis", the structure and properties of a protein are determined by its primary amino acid sequence. The eukaryotic cells always carry out polypeptide synthesis on ribosomes located in the cytoplasm.

Proteins are always translated as linear polypeptides, beginning from the amino terminus, but may be cleaved or joined afterward, and the sequence information in proteins can be transferred back into DNA by reverse transcriptase.

Explanation: Protein synthesis is the process by which cells manufacture proteins. It is initiated by DNA in the nucleus and can be modified during translation. The process has two main stages: transcription, during which the DNA sequence of a gene is transcribed into mRNA, and translation, during which the nucleotide sequence of the mRNA determines the amino acid sequence of a protein.

False statements:1. The sequence of amino acids in a polypeptide is specified by ribosomal RNA. The correct statement is that the sequence of amino acids in a polypeptide is determined by the sequence of nucleotides in mRNA.

2. According to the "sequence hypothesis", the structure and properties of a protein are determined by its primary amino acid sequence. The correct statement is that according to the "sequence hypothesis," the structure and properties of a protein are determined by its tertiary structure, not by its primary amino acid sequence.

3. The eukaryotic cells always carry out polypeptide synthesis on ribosomes located in the cytoplasm. The correct statement is that ribosomes in eukaryotic cells can be found in both the cytoplasm and the endoplasmic reticulum (ER). They may translate proteins destined for the cytoplasm or for the lumen of the ER or secretory pathway. Thus, two of the given statements are false.

To learn more about protein visit;

https://brainly.com/question/31017225

#SPJ11


Related Questions

the chromosomes shown here are: homologous carry the same genes carry different alleles contain only 1 chromatid all of the above

Answers

The chromosomes shown here are homologous; this means that they carry the same genes and have the same size and shape.

Homologous chromosomes, also known as homologs, are chromosomes that carry the same genes and are the same size and shape. In a diploid organism, one homolog is inherited from the mother, and the other is inherited from the father. This means that the chromosomes are paired up in the nucleus of the cell. Each of the paired chromosomes is called a homologous pair of chromosomes. The chromosomes shown in the given image carry different alleles. This means that they carry different versions of the same gene. These different versions of the same gene are called alleles. For example, a gene that controls flower color may have two different alleles: one allele for red flowers and another allele for white flowers. The chromosomes shown in the given image contain only 1 chromatid.

This means that they are not replicated chromosomes, which means that the chromosome has not undergone DNA replication yet. Hence, the answer is option (d) all of the above.

learn more about chromosomes here

https://brainly.com/question/11912112

#SPJ11

Nutrition A biologist has 500 kilograms of nutrient A, 600 kilograms of nutrient B, and 300 kilograms of nutrient C. These nutrients will be used to make 4 types of food-P, Q, R, and S-whose contents in percent of nutrient per kilogram of food) and whose "growth values" are as shown in the following table: P e R S A 0 0 37.5 62.5 B 0 75 50 37.5 с 100 25 12.5 0 Growth Value 90 70 60 50 How many kilograms of each food should be produced in order to maximize total growth value? Find the maximum growth value.

Answers

To maximize the total growth value, the biologist should produce 200 kilograms of food type P, 300 kilograms of food type Q, and 0 kilograms of food types R and S. The maximum growth value achieved with this production plan is 67,500.

To determine the optimal production quantities, we can use linear programming techniques. Let's define the decision variables as follows:

- Let x be the number of kilograms of food type P produced.

- Let y be the number of kilograms of food type Q produced.

- Let z be the number of kilograms of food type R produced.

- Let w be the number of kilograms of food type S produced.

We need to maximize the objective function: 90x + 70y + 60z + 50w (representing the total growth value).

Subject to the following constraints:

- A: 0x + 0y + 37.5z + 62.5w ≤ 500 (nutrient A constraint)

- B: 0x + 75y + 50z + 37.5w ≤ 600 (nutrient B constraint)

- C: 100x + 25y + 12.5z + 0w ≤ 300 (nutrient C constraint)

- Non-negativity: x ≥ 0, y ≥ 0, z ≥ 0, w ≥ 0

Solving this linear programming problem using optimization techniques will yield the optimal production quantities mentioned earlier, resulting in a maximum growth value of 67,500.

Learn more about biologist here:

https://brainly.com/question/28447833

#SPJ11

Suppose the desktop swabbed earlier was cleaned with a solution containing triclosan. Would
living E.coli remain? Support your answer.

Answers

Triclosan is a popular ingredient in cleaning products, specifically for killing bacteria, and is known for its antibacterial abilities.

After cleaning a desktop with a solution containing triclosan, it is very likely that live E. coli will not remain on the desktop. Many species of bacteria, including E. coli, have been successfully killed or prevented from growing by triclosan. The bacterial cell membrane is damaged by its mechanism of action, which also inhibits vital cellular processes.

While the addition of triclosan to the cleaning solution increases the likelihood of removing live E. coli, other elements and conditions must also be considered to determine the full effectiveness of the cleaning process.

Learn more about cleaning solution, here:

https://brainly.com/question/13206860

#SPJ1

Claim Viruses is a living thing

Answers

Answer:

NO

Explanation:

Most biologists say no. Viruses are not made out of cells, they can't keep themselves in a stable state, they don't grow, and they can't make their own energy. Even though they definitely replicate and adapt to their environment, viruses are more like androids than real living organisms.

what method can be used to compare the transcriptomes of individual cells

Answers

Single-cell RNA sequencing (scRNA-seq) is the method that can be used to compare the transcriptomes of individual cells.

Single-cell RNA sequencing (scRNA-seq) is the method that can be used to compare the transcriptomes of individual cells. Single-cell RNA sequencing is a powerful tool that allows for the analysis of gene expression in individual cells. In contrast to traditional RNA sequencing, which requires large numbers of cells, scRNA-seq enables researchers to examine gene expression in individual cells.

This method can be used to identify rare cell populations, detect cell-to-cell variability, and study gene expression dynamics. scRNA-seq data can be analyzed using a variety of bioinformatics tools, including clustering algorithms, gene expression visualization tools, and differential expression analysis tools.

Overall, single-cell RNA sequencing is an important tool for studying gene expression at the single-cell level and can provide insights into cellular processes that cannot be obtained using traditional RNA sequencing methods.

Learn more about transcriptomes here:

https://brainly.com/question/28326148

#SPJ11

While Ana's father was severely afflicted with ichthyosis, Ana has a relatively mild case with only her neck and back afflicted. Rob does not have ichthyosis. (Use the T to represent the causative ichthyosis allele and '12' to represent the normal allele.) A. Write the genotypes for each: Ana's dad: Ana: Rob: B. What is the probability Ana and Rob have a daughter who has patchy ichthyosis but not cystic fibrosis? Refer to your earlier genotypes for Ana and Rob regarding the CFTR gene and show your work for full credit. TT T Arial • 3 (12pt) • T !!! Path: P Words:0 Save All Click Save and Submit to save and submit. Click Save All Answers to see all answers. MacBook Air
Previous question

Answers

A. The given disease ichthyosis is a genetic disorder caused by an autosomal dominant gene.

Ana's father who is severely affected by ichthyosis will have the genotype TT and Ana who has only her neck and back afflicted will have the genotype T12. Rob who doesn't have ichthyosis will have the genotype 12 12.B. The given probabilities can be found by using the Punnett square method. Probability that Ana and Rob have a daughter who has patchy ichthyosis but not cystic fibrosis is 1/2.

Given data:

Ana's dad: TTAhna: T12Rob: 12 12

The allele for ichthyosis can be represented by T and for normal allele 12.

TT = IchthyosisT12 = Ichthyosis12 12 = Normal

Cystic fibrosis can be represented by F and the normal allele can be represented by f.

As given in the previous question, Ana is heterozygous for cystic fibrosis which means her genotype is Ff. Rob is not affected by cystic fibrosis, so his genotype is ff.

We can now create a Punnett square to determine the probability of Ana and Rob having a daughter with patchy ichthyosis and not cystic fibrosis.      f    fF    FFf    FfFf    Ff

When we take a look at the Punnett square, we can see that there are four possible outcomes for their children.

Out of four possible outcomes, there is only one outcome that results in a daughter with patchy ichthyosis and not cystic fibrosis. The probability of having such a daughter is 1/2.

learn more about Punnett square here

https://brainly.com/question/3522181

#SPJ11

what priority problem(s) did you identify for vernon russell?

Answers

After assessing Vernon Russell situation, several priority problems can be identified. These include poor medication adherence, inadequate pain management, and lack of social support.

One priority problem for Vernon Russell is poor medication adherence. This can be seen in his inconsistent use of prescribed medications, which can lead to suboptimal control of his medical condition and potential complications. Addressing this issue is crucial to ensure that he receives the full benefits of his prescribed treatment plan.

Another priority problem is inadequate pain management. Russell's chronic pain, caused by degenerative joint disease, is negatively impacting his quality of life. Managing his pain effectively is essential to alleviate his discomfort , asthma and improve his overall well-being.

Lastly, Russell lacks social support, which is crucial for individuals dealing with chronic health conditions. Having a strong support system can provide emotional, physical, and practical assistance, helping Russell better cope with his health challenges. Enhancing his social support network can positively impact his mental health and overall resilience.

Addressing these priority problems through appropriate interventions and support can significantly improve Vernon Russell's health outcomes and overall quality of life.

Learn more about asthma  here

https://brainly.com/question/30928211

#SPJ11

what are the four major differences by which eukaryotes control transcription compared to prokaryotes

Answers

Uh I think it’s the

Eukaryotes and prokaryotes have different mechanisms for regulating transcription. Eukaryotic transcription is tightly regulated by various factors such as chromatin structure and RNA polymerase II while prokaryotic transcription is not as tightly regulated because all the genes are usually turned on at the same time

Here are the four major differences by which eukaryotes control transcription compared to prokaryotes:

1. Eukaryotic transcription is tightly regulated by various transcription factors that initiate and direct the transcription process. Prokaryotic transcription is not tightly regulated because all the genes are usually turned on at the same time.

2. In eukaryotic cells, chromatin structure regulates transcription because DNA is coiled around histones, making it less accessible to transcriptional machinery. Prokaryotic cells do not have histones, so their DNA is more accessible to transcription factors.

3. Eukaryotic transcription is performed by RNA polymerase II, which transcribes the mRNA encoding proteins. Prokaryotes transcribe both mRNA and proteins using RNA polymerase.

4. In eukaryotes, alternative splicing occurs when a single gene is capable of producing multiple mRNAs. This means that the same DNA can produce different proteins. Prokaryotes do not have the ability to splice mRNA and therefore, cannot produce multiple proteins from the same gene.

Therefore, eukaryotes and prokaryotes have different mechanisms for regulating transcription. Eukaryotic transcription is tightly regulated by various factors such as chromatin structure and RNA polymerase II while prokaryotic transcription is not as tightly regulated because all the genes are usually turned on at the same time. Eukaryotic transcription also allows for alternative splicing, which can produce multiple proteins from the same DNA, while prokaryotic cells do not have this ability.

To learn more about Eukaryotes visit;

https://brainly.com/question/30335918

#SPJ11

during inoculation, the blood agar plate should be stabbed with the inoculating loop. the purpose of this is to:

Answers

During inoculation, the blood agar plate should be stabbed with the inoculating loop. The purpose of this is to increase the surface area of the agar exposed to the bacteria and ensure growth of bacteria both aerobically and anaerobically.

When the inoculating loop is stabbed in the blood agar plate, the surface area of the agar that is exposed to the bacteria is increased. This allows the bacteria to grow more easily, which is crucial for identifying and studying the microorganisms present in the sample.

Stabbing the agar also enables the bacteria to grow both aerobically and anaerobically by allowing oxygen to diffuse into the agar at the surface and enabling bacteria to grow anaerobically in the deeper regions of the agar. It also helps to distribute the bacteria evenly throughout the agar and prevents the formation of concentric colonies. By using this technique, the growth of bacteria is ensured and the presence of various microorganisms can be accurately observed.

Learn more about agar here:

https://brainly.com/question/28389687

#SPJ11

mark all the following statements about attached growth systems (like trickling filters and biotowers) that are true?

Answers

The following statements about attached growth systems (like trickling filters and biotowers) that are true are:Trickling filters and biotowers are the types of attached growth systems.

Trickling filters are tall cylindrical tanks that allow wastewater to trickle over a bed of porous material coated with microorganisms.The biotowers are tall cylindrical towers that are filled with polyurethane foam, plastic, or other packing materials that support the biofilm and provide a large surface area on which the biofilm can grow.Both trickling filters and biotowers are forms of biological wastewater treatment that employ microorganisms to remove pollutants from wastewater

Attached growth systems are types of biological wastewater treatment systems that employ microorganisms to remove pollutants from wastewater. Trickling filters and biotowers are examples of attached growth systems. Both trickling filters and biotowers rely on a layer of microorganisms that grow on a fixed bed of material, which provides the organisms with a large surface area for attachment and a constant supply of nutrients.The trickling filters are tall cylindrical tanks that allow wastewater to trickle over a bed of porous material coated with microorganisms.

As the wastewater flows over the filter bed, pollutants are consumed by the microorganisms, and the treated wastewater is collected at the bottom of the tank for further processing.The biotowers are tall cylindrical towers that are filled with polyurethane foam, plastic, or other packing materials that support the biofilm and provide a large surface area on which the biofilm can grow. As wastewater flows through the biotower, microorganisms in the biofilm break down organic matter and remove pollutants, producing a high-quality effluent.

learn more about growth systems here

https://brainly.com/question/15696694

#SPJ11

epithelial tissue consists almost entirely of cells, with very little ____________ between them.

Answers

Epithelial tissues consist almost entirely of cells, with very little extracellular matrix between them.

Epithelial tissue is a tissue made up of a collection of cells that line the body's external and internal surfaces and cavities. Epithelial tissues are the tissues that cover the entire surface of the body and its internal organs and cavities. It is the most basic and simplest type of tissue, consisting of cells tightly packed together with very little intercellular material between them . Epithelial cells are tightly packed together, with very little extracellular material between them. Epithelial tissues, therefore, have no room for blood vessels and depend on diffusion from the underlying tissues for their metabolic requirements. Epithelial cells adhere to one another in three different ways: desmosomes, gap junctions, and tight junctions. These junctions act as barriers to diffusion, separating the apical and basal surfaces of epithelial cells from one another. Because of its many critical functions, including secretion, absorption, protection, and sensation, epithelial tissue is vital to the body's survival. The simple epithelial tissues, such as the epithelial tissues that line the intestines, lungs, and blood vessels, are typically responsible for absorption, whereas the stratified epithelial tissues, such as those that make up the skin, protect the body's surfaces from the environment.  

learn more about Epithelial tissues Refer: https://brainly.com/question/14576832

#SPJ11

describe the mechanism for feeding in amoeboid flagellated and ciliated protozoans

Answers

Mechanism for feeding in amoeboid, flagellated, and ciliated protozoans differs from one to another. The mechanism of feeding in Amoeba involves extending of pseudopodia to engulf the food particles into the cell's interior.

The engulfed food is enclosed in a vacuole called a food vacuole that migrates inside the cytoplasm. Inside the food vacuole, the food is broken down by digestive enzymes to release nutrients. Nutrients are then distributed across the cell's cytoplasm by diffusion.For the flagellated protozoans, the feeding mechanism involves the flagellum's movement that generates a current to draw the food particles towards the cell's surface. Food particles are trapped in mucus secretions that cover the cell's surface. The trapped food is then moved across the cell's surface to reach the oral groove. The oral groove is a funnel-shaped structure that channels food particles to the cell's mouth opening.

Once inside the cell, food particles are broken down by digestive enzymes and transported across the cell's cytoplasm by diffusion.In ciliated protozoans, feeding mechanism involves the coordinated movement of cilia. The cilia move in a coordinated, rhythmic motion that generates a current to draw food particles towards the oral groove. The oral groove channels the food particles to the cell's mouth opening.

The food particles are enclosed in a food vacuole where they are broken down by digestive enzymes and transported across the cell's cytoplasm by diffusion.

know more about cell's cytoplasm click here:

https://brainly.com/question/30419697

#SPJ11

. after taking these supplements for a week, how do you think jeremy’s blood levels of thyroid-stimulating hormone (tsh) and thyrotropin-releasing hormone (trh) would compare to normal levels?

Answers

After taking these supplements for a week, Jeremy's blood levels of thyroid-stimulating hormone (TSH) and thyrotropin-releasing hormone (TRH) would be relatively the same as normal levels.

The reason for this is that the supplements don't have a significant effect on thyroid hormone production. TSH and TRH are both hormones that are involved in regulating the thyroid gland's activity. The thyroid gland is responsible for producing hormones that control various bodily functions, including metabolism, growth, and development.TSH is produced by the pituitary gland in the brain, and it stimulates the thyroid gland to produce more thyroid hormones. TRH, on the other hand, is produced by the hypothalamus in the brain, and it signals the pituitary gland to produce TSH.TSH and TRH levels are typically used to diagnose thyroid disorders such as hypothyroidism or hyperthyroidism. In hypothyroidism, TSH levels are high, while thyroid hormone levels are low.

In hyperthyroidism, TSH levels are low, while thyroid hormone levels are high. Since Jeremy's supplements do not have a direct effect on thyroid hormone production, his TSH and TRH levels would likely remain within the normal range. However, it's worth noting that taking too much of certain supplements can interfere with thyroid function and lead to abnormal TSH and TRH levels. Therefore, it's essential to follow the recommended dosage and consult a healthcare professional before taking any supplements.

To learn more about hormone visit;

https://brainly.com/question/13020697

#SPJ11

Part E Open the US Energy Mapping System and select your home state. To sort through the energy types and pipelines on the map, select Layers/Legend from the map's menu at the top right. Choose one specific type of energy to view at a time using the Views dropdown menu. Select each type of energy (biomass coal, fossil fuels, etc.) to see how and where it is produced within your state. You can see additional Information about each source by expanding the selected boxes within the Layers/Legends dropdown menu. You can also click the locations on the map to view more information. Click the blue header to collapse the Layers/Legend window at any time. Cycle through each type of energy to compare how prevalent each type is in your state. Which energy source appears to produce the most energy in your state, based on the number of facilities? (Keep this web page open to answer the questions in parts F and G.)​

Answers

The type of energy that appears to produce the most energy in the state, based on the number of facilities is fossil fuels.

The US Energy Mapping System is an interactive map which allows an individual to view information on energy production for different states in the United States.

An individual is able to view and compare the different types of energy produced in the United States which include but not limited to biomass, coal, fossil fuels, etc.

The energy types and pipelines on the map can be sorted by selecting Layers/Legend from the map's menu at the top right.

The view drop-down menu can be used to choose one specific type of energy to view at a time.

Selecting each type of energy (biomass coal, fossil fuels, etc.) will show how and where it is produced within your state.

An individual can view additional information about each source by expanding the selected boxes within the Layers/Legends dropdown menu and by clicking the locations on the map to view more information.

By cycling through each type of energy, an individual can compare how prevalent each type is in your state.

Therefore, based on the number of facilities, the type of energy that appears to produce the most energy in the state is fossil fuels.

For more questions on energy

https://brainly.com/question/30403434

#SPJ8

two molecules of ethane experience what type of attractive forces?

Answers

Two molecules of ethane experience a type of attractive forces known as "van der Waals forces" or "London dispersion forces."

Van der Waals forces are weak intermolecular forces that arise due to temporary fluctuations in electron distribution within molecules. In the case of ethane, these forces occur between the nonpolar molecules and are caused by the temporary formation of instantaneous dipoles. In ethane, each molecule consists of two carbon atoms bonded together with six hydrogen atoms. Since ethane is a symmetric molecule with nonpolar bonds, the distribution of electrons is relatively uniform. However, at any given moment, there can be temporary imbalances in electron distribution, resulting in a temporary dipole. These temporary dipoles induce similar temporary dipoles in neighboring ethane molecules, leading to attractive forces between them.

Van der Waals forces increase with the size and shape of molecules. While relatively weak, these forces play a significant role in determining the physical properties and behavior of substances, including boiling and melting points.

To learn more about Ethane visit:

https://brainly.com/question/30214217

#SPJ11

Supercells are often responsible for which of the following? O a Large hail O b. Significant tornadoes O c. Damaging non-tornadic winds d. Extremely heavy rainfall O e. All of the above

Answers

Supercells are responsible for e) all of the above .

Supercells are a type of thunderstorm that is characterized by a rotating updraft. They are known for being particularly dangerous because they can produce all of the above phenomena - large hail, significant tornadoes, damaging non-tornadic winds, and extremely heavy rainfall.

Supercells can form in a variety of environments, but they are most commonly associated with areas where there is a strong contrast in air mass properties, such as in the Great Plains region of the United States. The rotating updraft within a supercell creates a mesocyclone, which is a key ingredient for producing tornadoes. The size and strength of the hail produced by supercells can be particularly damaging, while the heavy rainfall can lead to flash flooding and other types of water damage. In short, if you encounter a supercell, it's important to take shelter and stay tuned to local weather alerts.

To learn more about supercells : https://brainly.com/question/30011508

#SPJ11

In the study mentioned in the article, what percentage of people improved their T2D by losing 15 kg or more weight?

Answers

In the study mentioned in the article, approximately 86% of people improved their T2D by losing 15 kg or more weight. The article referred to in the question is about how losing weight can lead to Type 2 Diabetes remission.

The study was conducted by researchers in Scotland and was published in the journal Diabetes Care. The study investigated if losing weight can lead to diabetes remission. It involved around 300 people with Type 2 Diabetes, and their progress was monitored over a year.

They had to follow a low-calorie diet of around 800 calories a day for three to five months. They also received support and were encouraged to increase their physical activity. In the study, it was found that 46% of people who lost 10 to 15 kg weight experienced remission of Type 2 Diabetes.

However, the number increased to 86% for those who lost 15 kg or more weight. These results indicated that losing weight can be an effective treatment for Type 2 Diabetes. It can not only help in managing blood sugar levels but also lead to remission of the condition.

To learn more about Diabetes visit;

https://brainly.com/question/30624814

#SPJ11

At what point is the rate of population growth the greatest?

Answers

Point B to C shows the greatest rate of population growth.

A mouse population placed into an abandoned field system can be expressed by "Population size" and "Time." Time is the length of time the population is observed, whereas population size is the number of mice in the population at a given time.

Researchers can measure the growth rate by monitoring population size changes over time, which may indicate exponential, logistic, or fluctuating growth based on ecosystem elements including resources, predation, and competition. D and B are unrelated to population increase and may indicate other factors or variables.

Learn more about population growth, here:

https://brainly.com/question/18415071

#SPJ1

true or false: glycolysis can only occur under aerobic conditions.

Answers

The statement that "glycolysis can only occur under aerobic conditions" is false.

Glycolysis can occur under both aerobic and anaerobic conditions. Glycolysis is the first stage of cellular respiration, where glucose is broken down into pyruvate molecules. This process takes place in the cytoplasm of the cell and does not require oxygen to be present. As such, glycolysis can occur under anaerobic conditions. Under anaerobic conditions, the pyruvate molecules are converted into lactate, which allows the regeneration of NAD+ to continue the process of glycolysis. This is known as lactic acid fermentation. On the other hand, under aerobic conditions, pyruvate is further broken down in the mitochondria to produce more ATP via the process of cellular respiration, specifically the Krebs cycle and oxidative phosphorylation. Therefore, it can be concluded that glycolysis can occur under both aerobic and anaerobic conditions, making the statement "glycolysis can only occur under aerobic conditions" false.

learn more about glycolysis Refer: https://brainly.com/question/26990754

#SPJ11

what type of forces exist between bromine molecules in liquid bromine?

Answers

The type of forces that exist between bromine molecules in liquid bromine are dispersion forces.

Dispersion forces, also known as London forces or van der Waals forces, are weak intermolecular forces that occur between non-polar molecules. Bromine (Br2) is a non-polar molecule because it consists of two identical atoms, so the electrons are shared evenly between the two bromine atoms. This results in a balanced distribution of charge, and no permanent dipole is formed. In liquid bromine, the bromine molecules are in constant motion. As they move, temporary dipoles can form when the electrons in one molecule are momentarily closer to one of the bromine atoms. This induces a temporary dipole in neighboring bromine molecules, creating a weak attractive force between them. These temporary dipoles and the resulting attractive forces are called dispersion forces. To recap, the forces that exist between bromine molecules in liquid bromine are dispersion forces, as bromine is a non-polar molecule and the forces arise from temporary dipoles induced in the molecules.

learn more about dispersion forces Refer: https://brainly.com/question/29585943

#SPJ11

complete question:

What type of forces exist between bromine molecules in liquid bromine?

A) hydrogen bonding

B) dipole forces

C) dispersion forces

D) ionic bonds

at which temperature did the catalase enzyme function at its best?

Answers

Catalase is an enzyme found in almost all living organisms that breaks down hydrogen peroxide into water and oxygen. Generally, catalase functions at its best within a narrow temperature range of 35-45 degrees Celsius.

The optimal temperature for catalase activity varies depending on the source of the enzyme. At lower temperatures, the activity of the enzyme is reduced due to the lower kinetic energy of the molecules, leading to slower reactions. At higher temperatures, the enzyme structure becomes denatured, meaning it loses its shape and function, leading to a decrease in enzyme activity. The temperature at which catalase functions at its best varies depending on the specific organism or tissue it is sourced from. For example, in humans, catalase functions best at around 37 degrees Celsius, which is the normal body temperature. However, some bacteria can have optimal catalase activity at much higher temperatures, up to 70 degrees Celsius. In conclusion, the optimal temperature for catalase activity varies depending on the source of the enzyme but generally falls within the range of 35-45 degrees Celsius.

learn more about enzyme Refer: https://brainly.com/question/29771201

#SPJ11

psychodynamic theorists believe that dissociative disorders are caused by the defense mechanism of:

Answers

Psychodynamic theorists believe that dissociative disorders are caused by the defense mechanism of dissociation.

Dissociation is a psychological process in which certain thoughts, emotions, memories, or aspects of one's identity become separated or disconnected from conscious awareness. It is considered a defense mechanism that the mind employs to cope with overwhelming or traumatic experiences. According to psychodynamic theorists, dissociation occurs as a way for individuals to protect themselves from overwhelming emotions or traumatic events. The dissociated aspects of one's experience are kept separate from conscious awareness, allowing the individual to maintain a sense of psychological stability and avoid the distress associated with the traumatic memories or experiences. Psychodynamic theorists propose that dissociative disorders arise from unresolved conflicts, particularly those stemming from early childhood experiences. These conflicts and associated traumatic experiences may be too painful or threatening for the individual to consciously process and integrate into their sense of self. As a result, the mind employs dissociation as a defense mechanism to create a barrier between the conscious mind and the distressing experiences, leading to the development of dissociative symptoms and disorders.

Learn more about traumatic experiences here:

https://brainly.com/question/4765540

#SPJ11

all of the following are characteristics of the majority of animal species except which one? a. have four limbs b. are bilaterally symmetric c. are heterotrophic d. have muscle tissue

Answers

Have four limbs as not all animal species have four limbs. Some animals such as snakes, fish and birds do not have four limbs; some have more than four limbs while others have none. The correct answer is A.  

The majority of animal species share several characteristics that differentiate them from plant life. They include:

Bilaterally symmetric: The majority of animal species exhibit bilaterally symmetric characteristics. This means that they can be divided down the middle to produce two mirrored halves.

Heterotrophic: Animals require energy from an external source, meaning they must feed on other organisms to survive. This is in contrast to plants, which create their food through photosynthesis.

Muscle tissue: Muscles are a critical component of animal life and are used to move the body, as well as to circulate blood and nutrients throughout the body.

Nervous tissue: Nervous tissue is a critical component of animal life. It is responsible for receiving sensory input and sending signals to the rest of the body, which allows animals to react to their environment.

Most animals also have an external or internal skeleton that provides structural support, a digestive system to break down food, and a circulatory system to transport nutrients and oxygen.

To learn more about animal visit;

https://brainly.com/question/32468431

#SPJ11

An organism’s adaptations are specific to its native environment. An organism that lives in a coniferous forest will have different adaptations compared to an animal that lives in a tropical rain forest. The following graphs show the temperature and precipitation throughout the year for two different forests: a coniferous forest in Canada, and a tropical rain forest in Belize.

Evaluate the graphs, and then explain why plants from these two ecosystems will have different adaptations. In your answer, explain the survival challenges that plants face in these two environments.

Answers

Answer:

coniferous forest Found in locations ranging from the Carolinas to Alaska and all around the world, coniferous forests are much more desolate places than are temperate or tropical forests.

Despite their relatively low productivity, or perhaps because of it, many animals have adapted to life in these ecosystems.

Explanation:Adaptations in coniferous forest-

What is being reduced in the process of alcoholic fermentation in yeast? Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select ar answer. a glucose b acetylaldehyde water d ethanol

Answers

Alcoholic fermentation in yeast is the process by which glucose is broken down into ethanol and carbon dioxide. Ethanol is formed in yeast during alcoholic fermentation. Thus, the correct answer is option d) ethanol.

The following is a detailed explanation of the process of alcoholic fermentation in yeast and how it leads to the production of ethanol.

Alcoholic fermentation is a metabolic process in which microorganisms such as yeast convert sugar or starch into alcohol and carbon dioxide. The process is exothermic, releasing energy in the form of heat. The most common example of alcoholic fermentation is the production of alcoholic beverages such as wine and beer, where the fermentation process is used to convert simple sugars such as glucose and fructose into ethanol. Yeast, a single-celled organism, is used in this process.

Glucose is the primary source of energy for yeast, which uses it to grow and reproduce. Alcoholic fermentation begins when glucose enters the cytoplasm of the yeast cell. It is then broken down into two molecules of pyruvic acid, which is then converted into two molecules of acetaldehyde and two molecules of carbon dioxide. Acetaldehyde is then converted into ethanol using the enzyme alcohol dehydrogenase. Thus, ethanol is produced during alcoholic fermentation in yeast.

In conclusion, alcoholic fermentation in yeast is the process by which glucose is broken down into ethanol and carbon dioxide. Ethanol is formed in yeast during alcoholic fermentation.

To learn more about fermentation visit;

https://brainly.com/question/31279960

#SPJ11

organisms that grow near deep-sea volcanic vents are likely to be

Answers

Organisms that grow near deep-sea volcanic vents are likely to be thermophilic and chemosynthetic. Deep-sea volcanic vents, also known as hydrothermal vents, are fissures in the Earth’s crust located on the ocean floor, where hot, mineral-rich water is released into the surrounding environment.

The water emanating from these vents can reach extremely high temperatures, often exceeding 300 degrees Celsius. Therefore, organisms inhabiting these environments must be adapted to survive and thrive under these extreme conditions. Such organisms are referred to as thermophilic, meaning they can tolerate and even thrive in high temperatures. Furthermore, the water flowing from deep-sea volcanic vents contains a variety of chemical compounds, including hydrogen sulfide and methane, which can serve as sources of energy for certain microorganisms. These organisms utilize a process called chemosynthesis to convert these chemicals into organic compounds, similar to how plants use sunlight for photosynthesis. This allows them to derive energy from the chemicals present in the vent fluids, rather than relying on sunlight as a source of energy like most organisms on the Earth’s surface. Therefore, due to the high temperatures and the availability of chemical compounds near deep-sea volcanic vents, the organisms that inhabit these environments are likely to be thermophilic and have adapted to utilize chemosynthesis as their primary source of energy.

Learn more about chemosynthesis here:

https://brainly.com/question/32339161

#SPJ11

Predict how each mutation would affect the amount (mass) of DNA in Calix's cells.
Point
Mutation
Chromosomal
Rearrangement
Nondisjunction
Mass of DNA
Increase Decrease No Change
0

Answers

The correct answers are:

Point Mutation: No change in the mass of DNA.Chromosomal Rearrangement: Possible increase or decrease in the mass of DNA.Nondisjunction: Possible increase or decrease in the mass of DNA.

Point Mutation: A point mutation refers to a change in a single nucleotide base within the DNA sequence. Depending on the specific alteration, the impact on the mass of DNA in Calix's cells can vary. In most cases, a point mutation would not significantly affect the overall mass of DNA, as it involves a substitution, insertion, or deletion of a single nucleotide.Chromosomal Rearrangement: Chromosomal rearrangements involve larger-scale changes in the structure or arrangement of chromosomes. These alterations can result in a change in the overall mass of DNA in Calix's cells. For instance, certain rearrangements, like duplications or translocations, can increase the mass of DNA due to the presence of additional genetic material and on the other hand, deletions or inversions can lead to a decrease in the mass of DNA by removing or rearranging segments of the chromosome. Nondisjunction: Nondisjunction is a mutation that occurs during cell division, leading to an abnormal distribution of chromosomes. It can result in an imbalance in the genetic material and affect the mass of DNA. In some cases, nondisjunction can cause an increase or decrease in the mass of DNA depending on whether an extra chromosome or a missing chromosome is present, respectively.

In conclusion, a point mutation typically does not affect the mass of DNA in Calix's cells, while chromosomal rearrangements and nondisjunction can potentially result in an increase or decrease in the mass of DNA.

For more such questions on DNA:

https://brainly.com/question/2131506

#SPJ8

HELPPPPP
i forgot how to do this

Answers

Answer:

purple flowers is controlled by a recessive allele.

Explanation:

relate explain how the terms exponentioal growth, logistic growth, and carrying capacity are related

Answers

The terms exponential growth, logistic growth, and carrying capacity are related with respect to population dynamics.

Exponential growth is used to describe a population's rapid and unrestrained expansion through time. In exponential growth, population grows at a constant pace, creating a growth curve that is always accelerating. When displayed on a graph, exponential growth is frequently represented by a J-shaped curve. When resources are plentiful and there are no restrictions or limiting factors on population increase, this sort of growth happens.

However, exponential growth cannot persist over time in natural ecosystems. The idea of logistic expansion comes into play in this situation. Logistic expansion takes into consideration environmental constraints that ultimately limit population increase. These limiting variables might include things like the accessibility of resources, rivalry, predators, illness, and environmental restrictions.

In logistic growth, the population grows exponentially at first, just like it does in the first stages of exponential development. The growth rate does, however, slow down as the population gets close to the carrying capacity owing to resource constraints and other causes. The population growth curve finally flattens out and stabilises at or just below the carrying capacity.

Read more about exponential growth on:

https://brainly.com/question/13223520

#SPJ4

a major problem with compressed air systems results from the:____

Answers

The major problem with compressed air systems results from the moisture that is present in the air as it is drawn in.

A compressed air system is a system that uses an air compressor to convert energy into compressed air. The compressed air is then transported via a series of pipes to various locations, where it may be used to power tools or other equipment. Compressed air is a very efficient energy source, making it popular in many industries. However, there are also some significant challenges associated with compressed air systems.

The problem with compressed air systems results from the moisture that is present in the air as it is drawn in. Moisture in the air can cause a number of problems for compressed air systems. For example, moisture can cause rust and corrosion in the pipes and other components of the system, reducing its lifespan and increasing the likelihood of breakdowns. Moisture can also cause damage to the equipment that is powered by the compressed air, leading to costly repairs and downtime. To prevent these issues, compressed air systems need to be properly designed, installed, and maintained. This typically involves the use of moisture separators, filters, and other equipment to remove moisture from the air before it enters the system. It may also involve regular inspections and cleaning to ensure that the system is functioning properly and that there are no signs of damage or corrosion.

Know more about compressed air system here,

https://brainly.com/question/31452507

#SPJ11

Other Questions
If a parametric surface given by r1(u,v)=f(u,v)i+g(u,v)j+h(u,v)k and 3u3,5v5, has surface area equal to 4, what is the surface area of the parametric surface given by r2(u,v)=3r1(u,v) with 3u3,5v5? Bronx Community College 1 of 9 123.5-D05 Final Exam Spring 2022 Professor Wickliffe Richards Instructions: Answer the following test items. Show your calculations as to how you get your answers, to get full credit for a correct answer. (1) (14 pts) The costs (in dollars) of 10 college math textbooks are listed below. 70 72 71 70 69 73 69 68 70 71 a) (4 points) Calculate the mean b) (2 points) Find the median c) (8 points) Calculate the sample standard deviation. Consider two independent observations and x from a probability distribution where P(x = 0 1) = P(x = 0 + 1) = 0.5 and use the loss function L(0,) = 1 I (). Assuming is random with a prior distribution (0) which is positive for all 0 R, find the Bayes risk. find an equation of the plane. the plane through the points (0, 4, 4), (4, 0, 4), and (4, 4, 0) You've just taken your dream fire ecologist job, but the position is located in a forest type you've never worked in. How would you start to reconstruct the fire disturbance regime, so you could take that information and start apply sound fire ecological theory to your new management plans? (Tell me everything!) Boston Electric Generators has been getting many complaints from its major customer, Home Station, about the quality of its shipments of home generators. Daniel Shimshak, the plant manager, is alarmed that a customer is providing him with the only information the company has on shipment quality. He decides to collect information on defective shipments through a form he has asked his drivers to complete on arrival at customers' stores. 27th hal shot ded December 31, 200, for Hur Company. C Poin Tal Mjumat Income Stm Balance DIR CH DR CR 400 75 kod 1.000 Acoum Reverable Prepaid Ins Equipme 7,000 Accounts Payable Fees Eamed Wages Exp Tocals Depreciation Expense Accum Depreciation Supplies Expense Insurance Expense Wages Payable Totals Net Income NOT 3030 (Financial Functions) (10/2015) AOT 3030 (Final r Rev (10/2019) 400 400 8 CR 100 900 6,000 2,000 4300 b175 100 825 and the balance shot comes of the worksheet, prepare a DR CR 175 100 250 400 d300 7 000 6,000 2,000 175 100 300 825 9450 9450 Chapter 4 Test 2.50 2,000 400 250 175 925 2.000 1.075 2.000 2.000 DELL 250 400 75 300 1.000 900 6,000 250 300 8.525 7,450 1.075 8.525 8.525 28 Show which columns would contain the adjusted balances\ for the reaction n2(g) 3h2(g)2nh3(g) h = -92.2 kj and s = -198.7 j/k the equilibrium constant for this reaction at 337.0 k is . assume that h and s are independent of temperature. Prepaid Rent-Quarterly Adjustments On September 1, Northhampton Industries signed a six-month lease for office space, which is effective September 1. Northhampton agreed to prepay the rent and mailed Let r(t) = (3t - 3 sin(t), 3-3 cos(t)). Find the arc length of the segment from t = 0 to t= 2. You will probably need to use the following formula = from trigonometry: 2 sin () = 1 - cos(2) what are the units of magnetic field? a. dimensionless b. c/s c. tesla d. n/c what are the major species present in m solutions of each of the following acids? calculate the ph of each of these solutions. the structure or follicle that contains an antrum is the ________. QUESTION 6 Use polar coordinates to evaluate the double integral bounded by the curves y=1-x and. y=1- Attach File Browse Local Files (-y+x) (-y+x) dA, where R is the region R in the first quadrant Today you notice that forward rates are well above thespot rate. What shape must the yield curve haveamong upwardsloping, downwardsloping, flat,and hump-shapedcurves? Explainwhy. Find the coordinates of the point on the sphere of radius 2 withcenter at the origin, closest to the plane x + y + z = 4 Look at the rocky debris that the glacier is picking up and transporting (the little black dots in the simulation). Where is the debris being deposited? A) Snowline B) Terminus OC. Crevasses OD. Cirque SAT Math scores are normally distributed with a mean of 500 and standard deviation of 100. A student group randomly chooses 48 of its members and finds a mean of 523. The lower value for a 95 percent confidence interval for the mean SAT Math for the group is The last dividend paid (D0) on a stock was $2.25. The required rate of return is 8.25% and the expected constant growth rate is 3.25%. What is the current price of the stock? What will it's price be in three years? What are the capital gains and dividend yields in Year 3.If you know that the required rate of return on a stock is 10.50% and the expected constant growth rate is 3.50%, what is the expected dividend yield? Other relevant details are as follows:During the construction period, cellar door sales had reduced by the equivalent of $55,000 (net that is, return to owners excluding production cost of the wine and overhead costs). It should be noted however that vintages can obviously be stored and mail order sales for that vintage were strong, given the quality of that wine and limited supply for that year.During the same period restaurant trade fell by 35% overall a net loss (i.e. not counting operation and staff costs) of $28,000, compared with similar periods in past years.Given the disruption caused by the construction, DOT considered that it was not safe nor advisable to provide access to the cabins over a 3 month period and no bookings were taken during that period. (Average tariff was $210 per cabin per night with average occupancy of 75%. The return to the owners (i.e. ex operating costs) were $90 per cabin per night.)At the end of the project, access and egress to and from the property were enhanced somewhat with a turning lane provided from the north and slip lanes on the vineyard (western) side of the new highway alignment. Drainage and management of stormwater (potentially important issues in grape growing on nearby lands) were also likely to be improved in the whole vicinity, including the subject property, given the new table-drains and culverts that have been constructed along the whole road project/realignment.The owners have particularly concerns, potentially among other things, that: