The global ecological footprint can never exceed the capacity of two planets.
The data in the graph clearly shows that, since 1970, humanity exceed the Earth's biocapacity, which means that we are using up natural resources faster than the Earth can replenish them. This trend has continued for more than 50 years, and it has led to a general upward trend in the global ecological footprint. While there have been occasional periods of decrease, such as during economic recessions, the overall trend has been an increase in the ecological footprint. This trend is alarming because it puts the planet's resources and ability to support human life at risk.
In addition to highlighting the problem, the graph also suggests the need for action. Policymakers and individuals alike must take steps to reduce our ecological footprint, such as by promoting sustainable practices and reducing waste. While this may require significant changes in lifestyle and consumption habits, the consequences of inaction could be catastrophic for the planet and all its inhabitants. Therefore, it is essential to act quickly and decisively to reduce our ecological footprint and ensure a sustainable future for generations to come.
To learn more about ecological footprint, click here https://brainly.com/question/14441911
#SPJ4
The rock cicle deposition , compactación and cementación
Clasts, or plant and animal remains, are the fragments of pre-existing rocks that are compressed and bonded together to form sedimentary rocks.
What is the association of compaction and cementation to shake cycle?The formation of sedimentary rocks from loose sediments through the process of compression and cementation, also known as lithification. Naturally, melting is the process by which solid rock is transformed back into liquid magma. A process that takes hundreds of millions of years is the rock cycle.
What is the process of cementation and compaction?Squeezing air or water between sediment particles is known as compaction. The process by which minerals bond individual sediment grains together is known as cementation.
To learn more about sedimentary rocks here:
https://brainly.com/question/10709497
#SPJ4
Which of these locations is most likely to have the oldest rocks?a transform fault zonethe middle of a continenta mid-ocean ridgethe top of a mountain rangean abyssal plain of an ocean basin
The oldest rock on Earth can be found on the northeast coast of Hudson Bay in Canada's bedrock, which is 4.28 billion years old.
Which of the oldest rocks on the ocean floor is the oldest?A geologist in Israel claims that the eastern Mediterranean Sea's bottom contains the oceanic crust that is approximately 340 million years old, making it the oldest in the world.
Compared to the continents, the seafloor is typically more flat and devoid of features. Erosion at the sea's surface flattened the flat-topped seamounts known as guyots, which were discovered with their tops 1800 meters below the surface. Geologically, the continental crust includes continental shelves.
Where can one find the oldest rocks?Mineral grains known as zircons, which can be found in Western Australia and date back approximately 4.36 billion years, are the oldest known form of geological material, although technically they are not rocks.
To learn more about Mineral grains here:
https://brainly.com/question/19548940
#SPJ4
Why is surface water near the Equator not likely to sink down into the deep ocean?
a. Because water near the Equator is much warmer than the deep ocean so there is no density difference between the surface and deep ocean
b. Because water near the Equator is much warmer than the deep ocean so the surface water is much less dense and will not sink
c. Because water near the Equator is saltier than the deep ocean so the surface water is much more dense and will not sink
Answer: i think c
Explanation:
The series of processes in which rock forms, changes from one type to another, is destroyed, and forms again by geological processes is called: ________
The series of processes in which rock forms, changes from one type to another, is destroyed, and forms again by geological processes is called the rock cycle.
What is the rock cycle?Crystallization, metamorphism, and sedimentation are the three processes that are responsible for the transformation of one rock into another. By undergoing one or more of these processes, any type of rock has the potential to metamorphose into any other type of rock. This results in the formation of the rock cycle.
The rock cycle is an explanation of the relationships between the three different types of rocks and how the mechanisms that alter rocks from one type to another over time. Due to the cyclical nature of this process, the transformation of rock is referred to as a geologic cycle and, on planets that support life, a biogeochemical cycle.
To learn more about the rock cycle, click here:
https://brainly.com/question/29767269
#SPJ4
Regions where the continents or the sea floor are pulling apart are called
a. convection zones
b. subduction zones
c. magnetospheric zones
d. rift zones
Answer:
b. subduction zones
Explanation:
what kind of tides would you expect during a new moon?
When the sun, moon, and Earth are in alignment (at the new or full moon), the solar tide adds to the lunar tide, resulting in extra-high high tides and very low, low tides—both known as spring tides.
There are three basic tidal patterns in the world: semidiurnal, mixed, and diurnal. A semidiurnal tide occurs when both high tides are roughly equal to each other and both low tides are roughly equal. A mixed tide occurs when the two highs and lows differ significantly.
This is the most common tidal pattern, with two highs and two lows each day and little variation in the height of successive high or low waters, and it is found along much of North America's east coast.
Learn more about kind of tides
https://brainly.com/question/30581998
#SPJ4
In 1914 Germany was an ally of
Russia was an ally of
Which category did France fall under?
Which category did the Ottoman Empire fall under?
and
Answer: Russia was ally of France and great Britain
The Ottoman Empire came into World War I as one of the Central Powers. The Ottoman Empire entered the war by carrying out a surprise attack on Russia's Black Sea coast on 29 October 1914, with Russia responding by declaring war on 2 November 1914.
During World War I, France was one of the Triple Entente powers allied against the Central Powers.
what region has about half of the world’s known oil reserves?
The Middle East region is estimated to hold about half of the world's known oil reserves.
This region is home to some of the world's largest oil-producing countries, including Saudi Arabia, Iran, Iraq, and the United Arab Emirates. Oil was first discovered in the Middle East in the early 20th century, and since then, the region has become a major player in the global oil industry. The abundant reserves of oil in the Middle East have made the region a key factor in determining the global oil market, as well as a source of political tension and economic power.In Saudi Arabia, the world's largest oil producer, oil accounts for over 90% of the country's total exports and nearly 70% of its gross domestic product. Other major oil producers in the Middle East include Iran, Iraq, and the United Arab Emirates, which also have substantial reserves of oil.The oil reserves in the Middle East are located mainly in the Persian Gulf, with major fields located in Saudi Arabia, Iran, and Iraq.
learn more about oil reserves here:
https://brainly.com/question/241564
#SPJ4
a boundary formed when two plates move away from each other
Answer:
a divergent boundary occurs when two tectonic plays move away from each other.
This figure shows the main subdivisions of the geologic timescale. Which of these is ... A. Cenozoic
B. Mesozoic C. Paleozoic D. Precambrian.
The geologic timescale is a system of chronological dating that classifies Earth's history into different time intervals on significant geological events
The four main subdivisions of the geologic timescale, from most recent to oldest, are:A. Cenozoic: This is the most recent subdivision, spanning from 66 million years ago to the present day. It is characterized by the rise of mammals, birds, and flowering plants, as well as the evolution of modern humans.B. Mesozoic: This subdivision spans from 252 to 66 million years ago and is known as the "Age of Reptiles." It includes the famous dinosaurs, as well as the emergence of birds, flowering plants, and the first mammals.C. Paleozoic: This subdivision spans from 541 to 252 million years ago and is known as the "Age of Invertebrates." It includes the rise of complex life forms such as fish, amphibians, reptiles, and insects.D. Precambrian: This is the oldest subdivision, spanning from the formation of the Earth (4.6 billion years ago) to 541 million years ago. It includes the earliest known forms of life, such as bacteria and algae, and the evolution of simple multicellular organisms.
learn more about timescale here:
https://brainly.com/question/29971187
#SPJ4
Where is active sea-floor spreading occurring today? The Red Sea. The Great Salt Lake. The Mississippi River. Lake Michigan.
option 1) The Red Sea. is active sea-floor spreading occurring today.Some of the world's hottest and saltiest seawater can be found in the Red Sea.
The Red Sea is the saltiest of all the seas that connect to the ocean without the presence of a single river. One popular theory for the Red Sea's name is that it contains a cyanobacterium called Trichodesmium erythraeum, which turns the normally blue-green water reddish-brown.
Some of the world's hottest and saltiest seawater can be found in the Red Sea. It is one of the most heavily traveled waterways in the world, carrying maritime traffic between Europe and Asia via its connection to the Mediterranean Sea via the Suez Canal. Its name comes from the color changes seen in its waters.
Learn more about The Red Sea
https://brainly.com/question/557668
#SPJ4
Full Question :Where is active sea-floor spreading occurring today?
The Red Sea. The Great Salt Lake. The Mississippi River. Lake Michigan.the new jersey plan called for all of the following except?
A. Congress would elect several people to form an executive office.
B. the elimination of a Supreme Court.
C. the ability of Congress to regulate trade and impose taxes.
D. acts of Congress would be the supreme law of the land. E. the principle of one state, one vote.
The New Jersey Plan called for all of the following EXCEPT:
B. The elimination of a Supreme Court.
The New Jersey Plan was one of the proposals for the structure of the United States government put forward at the Constitutional Convention of 1787. It was presented as an alternative to the Virginia Plan, which proposed a strong federal government with a two-house legislature.
The New Jersey Plan called for a unicameral (one-house) legislature, in which each state would have equal representation and the principle of "one state, one vote" would apply. It also proposed an executive branch made up of several people elected by Congress, and a Supreme Court to be appointed by the executive. Additionally, the New Jersey Plan proposed that acts of Congress would be the supreme law of the land and that Congress would have the ability to regulate trade and impose taxes.
Thus, the New Jersey Plan did not call for the elimination of a Supreme Court, which distinguishes it from the other proposals put forward at the Constitutional Convention.
To learn more about New Jersey Plan , click here:
https://brainly.com/question/28907645
#SPJ4
What role does nondisjunction play in the formation of a fertile allopolyploid hybrid? -It doubles the chromosome number in the hybrid.
-It allows gametes of the two parent species to combine.
-It causes the chromosomes to line up at the center of the cell during mitosis.
-It breaks down chromosomes that don't exist as homologous pairs.
Nondisjunction plays a role in the formation of a fertile allopolyploid hybrid by doubling the chromosome number in the hybrid.
Nondisjunction is an error in cell division that occurs when chromosomes do not separate properly during meiosis, leading to gametes with an abnormal number of chromosomes. In the context of allopolyploid hybridization, nondisjunction can occur when gametes from the two parent species with different chromosome numbers combine, resulting in a hybrid with a doubled chromosome number. This can lead to the formation of a fertile allopolyploid hybrid, as the doubled chromosome number can result in hybrid offspring with new combinations of traits and an increased level of genetic diversity.
Allopolyploidy is a type of hybridization where two different species mate and produce offspring with a doubled set of chromosomes. This is because the hybrid offspring inherit one set of chromosomes from each parent, resulting in a chromosome number that is twice that of the parent species.
In order for an allopolyploid hybrid to be fertile and capable of producing viable offspring, it is important that the chromosomes from the two parent species are able to pair and align properly during meiosis. This is where nondisjunction comes into play. Nondisjunction is a type of meiotic error where the chromosomes do not separate properly, resulting in gametes with an abnormal number of chromosomes.
To learn more about Allopolyploidy :
https://brainly.com/question/12944602
#SPJ4
5. based upon your calculations, can the landscape be restored to its original topography? explain why this is or is not possible. does legislation requiring restoration make mining more expensive?
Yes, legislation requiring restoration can make mining more expensive. Restoring a landscape after mining activities have taken place can be a costly and time-consuming process, and mining companies may need to allocate additional funds and resources to comply with restoration requirements.
Restoring a landscape to its original topography after mining activities have taken place is often difficult, if not impossible. The mining process typically involves significant disruption of the natural landscape, including excavation, removal of vegetation and topsoil, and alteration of the underlying geology. As a result, it can be challenging to recreate the original topography and ecosystem.
In some cases, however, it may be possible to mitigate some of the damage and restore some aspects of the landscape. This might involve techniques such as contouring the land to mimic natural topography, reintroducing native vegetation, and implementing erosion control measures. The success of restoration efforts will depend on a range of factors, including the extent and type of mining activity, the condition of the landscape prior to mining, and the resources available for restoration.
Legislation requiring restoration can make mining more expensive, as companies may need to allocate additional funds and resources to comply with restoration requirements. This can also be a deterrent for mining companies, as the cost of restoration can make certain mining activities economically unfeasible. However, requiring restoration can also help to minimize the environmental impact of mining and ensure that the land is returned to a more sustainable state after mining is complete.
To learn more about topography, click here:
https://brainly.com/question/2279445
#SPJ4
help m e pelaseseeee
Answer:
24)=A,25)=c
Explanation:
24) ans is A
25) ans is C
what patterns of spatial distribution exist in the United States’ political parties.
Answer:
In the United States, political parties tend to have distinct spatial distributions. Generally, the Democratic Party is more popular in urban areas, while the Republican Party is more popular in rural areas. Additionally, the Democratic Party tends to be more popular in the Northeast and West Coast, while the Republican Party is more popular in the Midwest and South.
what does the presence of mud cracks and mud curls indicate about the rock's depositional environment?
They suggest a setting where the sediment was wet and later dried off. A tidal flat or flood plain might be such a setting.
What are the three depositional environments?An area of the earth's surface known as the depositional environment is where sediments are laid down and has specific chemical, biological, and physical properties. There are three different types of depositional habitats: continental, marginal marine, and marine environments.
What kinds of habitats are depositional environments?A depositional environment is a particular kind of location where sediments are deposited, such as a stream channel, a lake, or the bottom of a deep ocean. They are frequently referred to as sedimentary environments.
To know more about depositional environments visit:
https://brainly.com/question/29038474
#SPJ1
what are the economic uses of three common nonsilicate minerals? Halite is used for common salt, gypsum is used in plaster, and graphite is used as pencil lead.
The economic uses of three common non-silicate minerals are as follows:
Halite: Halite is commonly known as rock salt and is primarily used as a source of common salt (sodium chloride). It is used in a variety of industries including the chemical industry for the production of soda ash and caustic soda, as well as the food industry for seasoning and preserving food products.
It is also used as a de-icing agent on roads and as a raw material in the manufacturing of glass and ceramics.
Gypsum: Gypsum is a soft mineral that is commonly used in the construction industry as plaster and wallboard. It is also used as a soil conditioner, in the production of cement, and as a filler in paper, paint, and other industrial applications.
Graphite: Graphite is a form of carbon that is used in a variety of industrial applications due to its unique properties such as high thermal conductivity, electrical conductivity, and lubrication.
It is commonly used as pencil lead, as well as in the manufacturing of batteries, lubricants, and crucibles for high-temperature applications. It is also used as a raw material in the production of steel and other alloys.
For more questions like Minerals click the link below:
brainly.com/question/11285252
#SPJ4
3. What does the word geology mean?
Answer:
study of earth, divided between physical and historical
Explanation:
What is responsible for the mild climates found in western and northern europe?
The mild climates found in western and northern Europe are primarily due to the warming effects of the North Atlantic Drift, which is a warm ocean current that brings heat from the Gulf of Mexico to the region.
This current keeps the coastal areas of these regions relatively warm in the winter and cool in the summer, leading to mild year-round temperatures.
The sea surface temperature of the oceanic climate and the zone of the western and northern Europe are same as that of the eastern coast of the united stated as these are located on the higher latitudes as the climate of the western Europe is similar to that of the subtropical and the semi-arid in the southern parts and that of the Mediterranean humid climate that is induced by the North Atlantic current.
For more questions like Mild Climate visit the link below:
https://brainly.com/question/10891670
#SPJ4
during the process of adiabatic cooling, the temperature decreases as air expands, but during adiabataic warming the temperature increases because the air has:
During the process of adiabatic cooling, the temperature decreases as air expands because the expansion of the air causes it to do work on its surroundings, which in turn lowers its internal energy, resulting in a decrease in temperature.
Adiabatic heating and cooling are thermodynamic processes that occur without the exchange of heat or matter between the system and its surroundings. These processes occur as a result of changes in the internal energy of the system caused by work done on or by the system.
During adiabatic heating, a gas is compressed, which increases its pressure and temperature. The work done on the gas during compression is converted into an increase in the internal energy of the gas, resulting in a higher temperature. This increase in temperature is due to the gas molecules having a higher average kinetic energy and moving faster.
On the other hand, during adiabatic cooling, a gas is allowed to expand, which reduces its pressure and temperature. The work done by the gas during expansion decreases its internal energy, resulting in a lower temperature. This decrease in temperature is due to the gas molecules having a lower average kinetic energy and moving slower.
To learn more about adiabatic, click here:
https://brainly.com/question/13002309
#SPJ4
which seismic waves are the slowest and recorded last on the seismogram but can cause the most damage?
Rayleigh waves are the slowest of all the seismic wave types and in some ways the most complicated.
A seismic wave is an acoustic energy wave that travels through the Earth or another planet. It can be caused by an earthquake (or quake in general), a volcanic eruption, magma movement, a large landslide, or a large man-made explosion that generates low-frequency acoustic energy.
Seismologists study seismic waves by recording them with seismometers, hydrophones (in water), or accelerometers. Seismic waves differ from seismic noise (ambient vibration), which is persistent low-amplitude vibration caused by a variety of natural and anthropogenic sources.
Learn more about seismic wave
https://brainly.com/question/13056218
#SPJ4
subduction zones occur a what type of plate boundary?
Subduction zones occur at convergent plate boundaries, where two tectonic plates move towards other and one plate sinks beneath.
The sinking plate, known as the subducting plate, sinks into the Earth's mantle and begins to melt, producing magma. This magma rises and can form volcanoes along the edge of the overlying plate, creating a chain of volcanic islands such as the Aleutian Islands or the Japanese island arc.The subduction process also generates earthquakes, as the subducting plate grinds against the overriding plate and releases built-up stress. The boundary between the two plates is known as the Benioff Zone, and it is characterized by a series of shallow and deep earthquakes that occur at depths of around 70 km to 700 km.Subduction zones are found along the margins of continents, where oceanic plates collide with and sink beneath continental plates. Some examples of subduction zones include the Pacific Ring of Fire, the Andes Mountains of South America, and the Sumatra-Java trench in the Indian Ocean.
learn more about subduction here:
https://brainly.com/question/29321895
#SPJ4
Copernicus said that t he rotation of the Earth on its axis caused the O A daily motions in the heavens. B phases of the Moon. OC retrograde motion of the planets O D eclipses of the Moon. O E motion of the Sun along the ecliptic.
The Earth and planets provided a comprehensive explanation for a wide range of celestial phenomena, from the stars and planets to the phases of the Moon and the retrograde motion of the planets.
Copernicus believed that the rotation of the Earth on its axis was responsible for the daily motions of the stars and planets in the sky. As the Earth rotates, it appears as though the stars and planets are moving across the sky, but in reality, it is the Earth's rotation that is causing this apparent motion.
However, Copernicus' theory also explained other celestial phenomena, such as the phases of the Moon. He observed that the Moon appeared to go through a series of phases, from new to full and back to new again, and he explained this as being caused by the Moon's position relative to the Earth and Sun.
Additionally, Copernicus' theory accounted for the retrograde motion of the planets, which was a puzzling phenomenon to earlier astronomers. As the planets move in their orbits around the Sun, they occasionally appear to reverse their motion and move backwards for a time. Copernicus explained this as being caused by the relative motion of the Earth and the other planets, and the fact that the Earth moves faster in its orbit than the outer planets.
For more such questions on Astronomy
https://brainly.com/question/12415970
#SPJ4
What is the tenacity of a mineral, and how can it be described? Tenacity is the mineral's resistance to breaking, bending, or otherwise deforming.
Tenacity refers to a mineral's ability to resist breaking, bending, or otherwise deforming.
In other words, it describes how tough and resilient a mineral is under stress. There are several different terms that can be used to describe a mineral's tenacity, including brittle, malleable, ductile, sectile, and flexible.
Brittle minerals are those that break or shatter easily when subjected to stress, while malleable minerals can be bent or molded without breaking. Ductile minerals can be stretched or pulled into thin wires or sheets, while sectile minerals can be cut into thin slices with a knife.
Flexible minerals can be bent or twisted without breaking, but they will not retain their new shape once the stress is removed. Understanding a mineral's tenacity is important for identifying and classifying minerals, as well as for predicting their behavior under various geological conditions.
For more questions like Mineral click the link below:
https://brainly.com/question/11285252
#SPJ4
select all of the following that explain why the fossil record is incomplete. - erosion and movements of the earth's surface have destroyed many fossils that did form. - many organisms decomposed before they were buried in sediments - many fossils may never be discovered because they are buried deeply or submerged under water.
For a number of causes, the fossil record is incomplete. Many fossils that did form have been lost by erosion and shifting of the earth's surface, and many more may never be discovered because they are buried underground or submerged beneath water.
In addition, many species died before being buried in sediments, which prevented them from becoming fossils.
Furthermore, the fossil record only provides a snapshot of ancient life; it's possible that certain species existed before and after fossilisation episodes but were not preserved as a result.
Finally, living organisms are continually developing, and many species may have evolved and become extinct before they could be fossilised. The fossil record is imperfect for the reasons listed above, among others.
To learn more about fossils visit:
https://brainly.com/question/179683
#SPJ4
PLEASE HELP BRAINLIEST!!!!!!!!!!!!!
Note that the causes in Dafur matched with their direct effect are given as follows:
reports of violence reach the international community → financial assistance sent to Sudan from other countriesunfair treatment of black Africans by Sudan's government → black Africans demand more representation in governmentJanjaweed militia, backed by military, attacks black Africans → thousands of deaths among black Africansdrought → conflict between black Africans and Arab nomads over land and water use.Who were the Janjaweed militia?The Janjaweed militia were a group of Arab tribes in Darfur, Sudan, who were accused of carrying out mass atrocities against black African tribes during the Darfur conflict in the early 2000s.
They were alleged to have been backed by the Sudanese government, and their actions were condemned by the international community as genocide and war crimes.
Learn more about Dafur:
https://brainly.com/question/11724123
#SPJ1
Answer:
Reports of violence reach the international community → right here is what you put: financial assistance sent to Sudan from other countries
And an Unfair treatment of black Africans by Sudan's government black Africans demand more representation in government
Janjaweed militia, backed by military, attacks black Africans → thousands of deaths among black Africans
drought conflict between black Africans and Arab nomads over land and water use
But wait
Who were these people that me and that other brainly user is telling you about, well? Well:
The Janjaweed militia were a group of Arab tribes in Darfur, Sudan, who were accused of carrying out mass atrocities against black African tribes. There was war and havock such then, people. Bad times because of just the color of their skin in some issues.
Explanation:
it has been suggested that the threat of global warming can be addressed by geoengineering strategies. which strategy has not been examined by researchers? question 3 options: adding iron to the oceans building lots of chemical plants to remove ocean acidity injecting sulfate particulates into the stratosphere covering the oceans with styrofoam chips placing giant mirrors in orbit above the earth to reflect sunlight
(a) adding iron to the oceans so that the threat of global warming can be addressed through geoengineering strategies.
Major radiative forcing geoengineering techniques discussed in the literature include stratospheric aerosol injection,sea sky brightening,cirrus thinning, space mirrors,surface-based brightening,and various radiation management techniques.Albedo enhancement. Increase the reflectivity of clouds or the Earth's surface so that more of the Sun's heat is reflected back into space.Space reflectors. By blocking a small proportion of sunlight before stratospheric aerosols reach Earth, some geoengineering schemes propose solar radiation management technologies that modify the Earth's albedo or reflect incoming short-wavelength sunlight.Human activity is driving this change, primarily through the emission of carbon dioxide (CO2) and other greenhouse gases, which are released.
To learn more about geoengineering please click on below link.
https://brainly.com/question/9522204.
#SPJ4
how do scientists believe that an asteroid impact in the yucatan peninsula of central america caused a worldwide mass extinction?
Scientists believe an asteroid struck the Yucatan Peninsula in central America. by suppressing photosynthesis and obstructing the sun.
The more than 10-kilometer-diameter asteroid hit a shallow ocean and shattered the planet's crust several kilometres below the surface. It melted, evaporated, and shattered the carbonate and sulphate-containing Yucatan target rocks as well as ocean water. A crater with a diameter of around 200 kilometres resulted as a result. beginning of the Chicxulub Drilling Project in Mexico's Yucatan On December 3, a scientific deep drilling operation into the Chicxulub crater, which was created about 65 million years ago by the impact of an asteroid and is thought to have led to the extinction of the dinosaurs and other species, will begin on the Yucatan Peninsula in Mexico.
learn more about asteroid impact here:
https://brainly.com/question/16544877
#SPJ4
10. Pilihan ganda45 detik1 ptQ. Dark moths began to outnumber white moths in cities after the Industrial Revolution. What is the most likely reason for this change?Pilihan jawabanLight-colored moths mutated into dark colored moths.Light-colored moths began to die due to overpopulation.Light-colored moths were less favored for survival in the new environment.Light-colored moths began to turn black because of factory pollution.
The most likely reason for dark moths beginning to outnumber white moths in cities after the Industrial Revolution is that light-colored moths were less favored for survival in the new environment.
Dark moths began to outnumber white moths in cities after the Industrial Revolution primarily because light-colored moths were less favored for survival in the new environment. The pollution and soot from factories and other industrial activities darkened the bark of trees in urban areas, providing better camouflage for dark-colored moths. This gave dark moths a survival advantage over light-colored moths, which were more visible to predators. As a result, over time, the population of dark moths increased while that of light-colored moths decreased. This phenomenon is an example of natural selection and demonstrates how human activities can have unintended consequences on the environment and the species that inhabit it.
This is because the soot and pollution from factories and other industrial activities darkened the bark of trees in urban areas, providing better camouflage for dark-colored moths. As a result, dark moths had a higher survival rate than light-colored moths, leading to an increase in their population over time. The other options listed are not supported by scientific evidence and are therefore less likely to be the cause of the change in moth populations.
To learn more about dark moths, click here:
https://brainly.com/question/15101218
#SPJ4
