Which two substances are reactants in the chemical reactions of cellular respiration?

The freezing point of the solution is - 0.12 oC.

We know that;

ΔT = K m i

ΔT = Freezing point depression

K = Freezing constant

m = molality

i = Van't Hoff factor

Number of moles of sucrose= 2.23g/342 g/mol = 0.0065 moles

Mass of solvent in Kg = 0.1 Kg

Molality of the solution = 0.0065 moles/ 0.1 Kg = 0.065 m

Now;

ΔT = 1.86 oC/m × 0.065 m × 1

ΔT = 0.12 oC

Freezing point of pure water = 0 oC

Freezing point of solution =  0 oC -  0.12 oC = - 0.12 oC

Learn more: https://brainly.com/question/2292439

The presence of electron donating methoxy group in  p-methoxybenzaldehyde , makes it less reactive towards  nucleophilic additions.

Nucleophilic addition reactions that involve of p-Nitrobenzaldehyde and p-methoxybenzaldehyde both occur at the C=O functional group. The electron density around the carbonyl is a key factor that controls the reactivity of each compound.

In  p-Nitrobenzaldehyde, the electron withdrawing nitro group decreases the electron density around the carbonyl making it more vulnerable to nucleophilic attack.

In p-methoxybenzaldehyde, the methoxy group donates electrons by resonance towards the carbonyl thereby increasing the electron density around it so that it is less reactive towards nucleophillic addition reaction.

The nucleophilic attack on p-Nitrobenzaldehyde leads to more resonance structures than nucleophilic attack on p-methoxybenzaldehyde.

Learn more: https://brainly.com/question/4699407

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The correct choice is ~ A

S.I unit of time is Second

1Touch and hold a clip to pin it. Unpinned clips will be deleted after 1 hour.

Work is said to be done if the force applied to a body causes the body to move through a distance.

Student B used more work and power

Workdone = Force * Distance

For student A:

Force = 3N

distance = 5meters

Time taken = 10 secs

Workdone by Student A = 3 * 5

Workdone by student A = 15Nm

Power used up = workdone/time

Power used up = 15/10

Power used up = 1.5 Watts

For student B:

Force = 6N

distance = 5meters

Time taken = 5 secs

Workdone by Student A = 6 * 5

Workdone by student A = 30Nm

Power used up = workdone/time

Power used up = 30/5

Power used up = 6 Watts

This shows that student B used more work and power

Learn more here: https://brainly.com/question/6701368

As electron delocalization stabilizes the compound it is necessary that it takes place for compound to exist , hence the given statement is false.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds .Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ2

If a student notices that  one-quarter of the moon is visible, a lunar eclipse has taken place.

Eclipse is said to occur when one of the heavenly bodies casts a shadow on another heavenly body causing it to be partly visible or completely invisible. When the earth comes between the sun and the moon, a lunar eclipse is said to occur.

When a lunar eclipse occurs, the moon may be partly visible or completely invisible. Therefore, if a student notices that  one-quarter of the moon is visible, a lunar eclipse has taken place.

Learn more: https://brainly.com/question/6505878

Answer:

ty sa pointd

Answer:

933.33 m/ min

Explanation:

1 mile = 1.6 km

So the car travels 1.6× 35 km in 1 hour

One hour has 60 minutes

So speed of car = 1.6×35 km / 60 minutes

1km = 1000 m

Speed = 1.6×35×1000 m/ 60 minutes

= 933.33 meters per minute

A car is traveling 35 miles per hour. The speed that is measured in meters per minute is 933.33 m/ min.

Speed is the dimension of distance. It is calculated in meters per second. It is the rate of change of an object in a direction. Speed is calculated by dividing the distance by time. It is a scalar quantity.

Given, that a car is traveling 35 miles per hour. The speed is given, in miles we just have to convert the miles into meters per minute. Miles if the English unit of measurement and meter is the SI unit of measurement.

1 mile = 1.6 km

So the car travels 1.6× 35 km in 1 hour

One hour has 60 minutes

So speed of car = 1.6×35 km / 60 minutes

1km = 1000 m

Speed = 1.6 × 35 × 1000 m/ 60 minutes

= 933.33 meters per minute

Thus, the speed of the car is 933.33 m/ min.

To learn more about speed, refer to the link:

https://brainly.com/question/7359669

#SPJ2

Answer:

sorry i dont know

Explanation:

Answer:

B.

Explanation:

Hope this helpssss

<33

When the pressure of the equilibrium mixture of SO2, O2, and SO3 is doubled at constant temperature, the Kp is also doubled.

The equation of the reaction is given by; 2SO2 + O2 → 2SO3. The Kp of the reaction is obtained from;

Kp = pSO3^2/pSO2^2 . pO2

Since the Kp depends on the individual partial pressures of each of SO2, O2, and SO3 at equilibrium, if the pressure of the equilibrium mixture is doubled, the Kp is also doubled.

Learn more: https://brainly.com/question/11324711

Some benefits of genetic engineering in agriculture are increased crop yields, reduced costs for food or drug production, reduced need for pesticides, enhanced nutrient composition and food quality, resistance to pests and disease, greater food security, and medical benefits to the world's growing population.

Insect resistance: Corn

Herbicide tolerance: Soybean

The theoretical yield of acetate is 2607 g. The actual yield of acetate is 1066.8 g. The percentage yield of acetate is 41%.

If 1 mole of vinegar contains 6.02  x 10^23 particles

x moles of vinegar contains 9.02 x 10^24 particles

x = 1 mole x 9.02 x 10^24 /6.02 x 10^23

x = 15 moles of vinegar

The reaction is as follows;

2HC2H3O2 + CaCO3 -----> Ca(C2H3O2)2 + H2O + CO2

Since 2 moles of vinegar reacts with 1 mole of carbonate

x moles of vinegar reacts with 16.5 moles of carbonate

x =  2 moles x 16.5 moles/ 1 mole

x = 33 moles of vinegar

We can see that the vinegar is the reactant in excess hence the carbonate is the limiting reactant.

Theoretical yield = 16.5 moles x 158 g/mol = 2607 g

Actual yield = 6.35 moles  x 158 g/mol = 1066.8 g

Percent yield = 1066.8 g/2607 g × 100/1

= 41%

Learn more: https://brainly.com/question/13440572?

Answer:

Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O

The reactants are present in equimolar amounts, so there is no excess or limiting reactants.

(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O

(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J

(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O

Explanation:

Answer:

Fe is the excess reactant

Reaction yields are the amount of the reactant and the products of a chemical reaction. In the reaction between iron and oxygen, iron is the excess agent.

The reactant present in an extra quantity than the other reactant in a chemical reaction which reacts with the limiting reactant is called an excess reactant.

In a reaction mixture, the excess reactant is present even when the limiting agent is completely consumed.

The chemical reaction between iron and oxygen is shown as,

[tex]\rm 4 Fe(s) + 3 O_{2}(g) \rightarrow 2 Fe_{2}O_{3}[/tex]

From the reaction, it can be said that oxygen is a limiting reagent that limits the formation of iron (iii) oxide.

Therefore, iron is an excess reactant.

Learn more about excess and limiting reagents here:

https://brainly.com/question/13285193

Answer:

It is an unstable form of a chemical element that releases radiation as it breaks down and becomes more stable.

THE ADVANTAGE OF IODIN

THE DISADVANTAGE OF IODIN

Answer:

Explanation:

The material that is not a mixture; it has the same properties all the way through is called a substance. Thus the material that is not a mixture; it has the same properties all the way through is called a substance.

ALL THE BEST :)

Answer: specialized body structures of Snakes

Explanation:

Snakes have many adaptations that allow them to move, hunt, eat and survive in their environments. Many animals have developed specific parts of the body adapted to survival in a certain environment. Among them are webbed feet, sharp claws, whiskers, sharp teeth, large beaks, wings, and hooves. In most aquatic animals, swimming is a must. To aid swimming, many animals have adapted and evolved with webbed feet.

Answer:

it gives an atom its charge

Answer:

Direct-air capture

Explanation:

To understand the technology I'm about to explain, I'll model it to something familiar. As you know, the process of  photosynthesis is where trees and plants use sunlight, water, and carbon dioxide to create energy for themselves, and release oxygen as a byproduct. Direct- air capture is exactly like this. Its pulls in air and then through a range of similiar chemical reactions, it extracts the carbon dioxide from it while returning the rest of the air to the surrounding environment. Except, the Direct-air capture does this at a much faster rate than nature does. The direct-air capture uses a ginormous fan that pulls air in which then passes over plastic surfaces that have potassium hydroxide solutions covered over them. The potassium hydroxide solution chemically binds with the carbon dioxide molecules, removing them from the air and trapping them in the liquid solution as a carbonate salt. The carbon dioxide is then contained where it is compressed and purified and then stored for later use.

found a picture hope this helps

Answer:

This is a picture of it hope this helps!

The Lewis structure along with bonds for ethene (C₂H₄) is drawn below-

A Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule.

The shared pairs of electrons are drawn as lines between atoms, while lone pairs of electrons are drawn as dots next to atoms.

They also display the total number of lone pairs present in each of the atoms that constitute the molecule.

Learn more about Lewis structure, here:

https://brainly.com/question/29603042

#SPJ6

Balanced:

2NaOH + CO2 → Na₂CO₃ + H₂O

Explanation:

To balance an equation, the amount of atoms on each side must be equal.

Atom Count on Reactant Side:

Atom Count On Product Side:

As you see, to simply balance the equation, put the 2 in order for the atom count on the reactant side to be equal to the product side. The 2 will add one more of each atom so that its the same as the product side.

Answer:

this the partial removal of a substance from a solution or mixture by dissolving it in another immiscible solvent in which it is more soluble.

Answer:

d. 83 °c

Explanation:

Answer:

D. 83 c

Explanation:

took the test

Answer:

1.345.0

Explanation:

Hope this helpssss

Answer:

Explanation:

Hydrodistillation is a traditional method for the extraction of bioactive compounds from plants. In this method, plant materials are packed in a still compartment then water is added in sufficient amount and brought to a boil. ... The vapor mixture of water and oil is condensed by indirect cooling with water.

[tex] \huge \bf༆ Answer ༄[/tex]

Question : - 1

An object that produces electrical energy through redox reactions is called Galvanic cell

Question : - 2

Pb undergoes Oxidation

[tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]