which type of event would include smerfs as well as wedding and party planners?

An employer has 3 employees, all of whom have exceeded the FUTA wage base. If the employer makes total payments to employees of $84,000 and enters $59,000 on line 5 of Form 940, then $25000 is entered on line 4 of Form 940.

More than half of workers start by reading the job description to assess the compensation they may expect before moving on to additional information about the job profile. Similar to this, it is the responsibility of the HR department to display accurate compensation information, distribute accurately calculated salaries, and guarantee that the workforce receives them. Several other payment methods are available, which we'll examine in more detail later.

Line 4 of Form 940 requires Payments exempt from FUTA Tax.

Hence Line 4 amount= 84000- 59000

=$ 25000

Different legislative regulations for paying employees exist in a large number of states and nations. Some of them provide pay-cards as a direct deposit substitute. The many payment methods are not known to every employee. Employees without bank accounts are not eligible for direct deposit. Mobile wallets cannot be used by those who don't own smartphones. Therefore, the employer must decide on the tactics to utilise in advance. To avoid legal repercussions, the company must pay the employees in accordance with official guidelines.

Learn more about Employees:

https://brainly.com/question/27404382

#SPJ4

Complete question;

An employer has 3 employees, all of whom have exceeded the FUTA wage base. If the employer makes total payments to employees of $84,000 and enters $59,000 on line 5 of Form 940, then $______ is entered on line 4 of Form 940.

Economists call the business practice of selling the same good at different prices to different customers "price discrimination." This practice allows businesses to capture more consumer surplus and increase their revenue by charging different prices based on customers' willingness to pay.

The business practice of selling the same good at different prices to different customers is called price discrimination. This practice is common in industries where there are varying levels of demand for the same product or service. By charging higher prices to customers who are willing to pay more, businesses can increase their profits. However, price discrimination can also be seen as unfair or discriminatory, as it can result in some customers paying more than others for the same product or service. It is important to note that price discrimination is not the same as collusion, which involves companies conspiring to fix prices. Additionally, compensating differentials refer to differences in pay or benefits that compensate workers for differences in working conditions or job requirements. Therefore, the correct answer to this question would be "A. Price discrimination."

To know more about Price discrimination visit:

https://brainly.com/question/29268450
#SPJ11

The after-tax cash flows for the company is found as: $72,750. The correct option  is $72,750.

The after-tax cash flows for the company can be calculated using the given information: earnings before depreciation and taxes (EBDT) of $82,000, depreciation of $45,000, and a 25% combined tax bracket.

First, we need to calculate the earnings before taxes (EBT) by subtracting depreciation from EBDT:
EBT = EBDT - Depreciation = $82,000 - $45,000 = $37,000

Next, we need to determine the taxes paid by multiplying EBT by the tax bracket:
Taxes = EBT * Tax Bracket = $37,000 * 0.25 = $9,250

Now we can calculate the earnings after taxes (EAT) by subtracting taxes from EBT:
EAT = EBT - Taxes = $37,000 - $9,250 = $27,750

Finally, to calculate the after-tax cash flows, we need to add back the depreciation since it is a non-cash expense:
After-Tax Cash Flows = EAT + Depreciation = $27,750 + $45,000 = $72,750

Therefore, the correct option  is $72,750.

Know more about the  after-tax cash flows

https://brainly.com/question/30777192

#SPJ11

There are no constraints on order size or lead time. In practice, these assumptions may not hold, and adjustments may need to be made to the EOQ calculation.

To determine the optimal order quantity that minimizes the total annual inventory cost, we can use the Economic Order Quantity (EOQ) formula. The formula is:

EOQ = sqrt((2DS)/H)

where:

D is the annual demand in units

S is the ordering cost per order

H is the annual holding cost rate as a decimal

Using the given information, we can calculate the EOQ as follows:

EOQ = sqrt((2 x 120 x $20) / 0.25)

EOQ = sqrt(4800)

EOQ = 69.28

Since we cannot order a fractional quantity, we need to round up to the nearest whole number. Therefore, we would recommend an order quantity of 70 units to minimize the total annual inventory cost. This order quantity falls within the second price break of the quantity discount schedule, which indicates that the unit cost of each item will be $15.50.

It's important to note that the EOQ model assumes that demand is constant and that there are no constraints on order size or lead time. In practice, these assumptions may not hold, and adjustments may need to be made to the EOQ calculation.

Learn more about constraints here

https://brainly.com/question/29989358

#SPJ11

The point in the supply chain that separates the push system from the pull system is called the "push-pull boundary."

The push-pull boundary is the point in the supply chain where products are produced based on anticipated demand (push system) and where products are produced based on actual customer demand (pull system).

Before the push-pull boundary, the production process is driven by a push system, where products are produced based on forecasts and anticipated demand. After the push-pull boundary, the production process is driven by a pull system, where products are produced based on actual customer orders and demand.

The push-pull boundary is an important concept in supply chain management as it helps to determine how much inventory should be held at each stage of the supply chain. By understanding the push-pull boundary and managing inventory levels accordingly, companies can improve supply chain efficiency, reduce waste, and improve customer satisfaction by providing products that meet actual demand.

Learn more about supply chain here:

https://brainly.com/question/30086410

#SPJ11

The restaurant manager decided to offer valet service at their restaurant is because they observed another similar restaurant offering the service.

Decision could be that the manager recognized the potential benefits of offering valet service, such as providing convenience for customers and improving the overall dining experience.

Additionally, the manager may have seen an increase in business and revenue at the other restaurant and believed that offering valet service could have a similar positive impact on their own restaurant.

In summary, the restaurant manager decided to offer valet service at their restaurant after observing another similar restaurant offering the service and recognizing the potential benefits it could bring to their own business.

learn more about customers click here:

https://brainly.com/question/380037

#SPJ11

It depends on what career path they choose. While some jobs may require less public speaking than others, it's important to remember that almost every job requires some level of communication with colleagues, clients, or customers.

Even if they are not delivering formal presentations, they may still need to give informal updates or speak in meetings.
Additionally, as they progress in their career, they may be asked to represent their company at industry events or conferences, which could require giving speeches or presentations.
However, if public speaking truly causes them a great deal of anxiety or stress, they can work on improving their skills and comfort level through training, practice, and coaching.

There are many resources available, both online and in person, that can help individuals become more confident and effective public speakers.
Overall, it's important for them to recognize that while they may not be giving college presentations anymore, communication and public speaking skills are valuable assets in any career.

Know more about communication here:

https://brainly.com/question/28153246

#SPJ11

For the most part, tactical planning is done at middle and top level of management.

The process of breaking down a company's strategic plan into more manageable, shorter-term plans in order to accomplish outcomes is known as tactical planning. Both top-level and middle-level management employ tactical planning to achieve their objectives.

After a team or corporation develops a strategic plan, tactical planning is the next step taken to divide that plan into more manageable objectives and goals. Goals are laid forth in a tactical plan together with the activities and tasks necessary to attain them. Most tactical plans provide a detailed description of the precise procedures or actions that will be followed to accomplish the objectives of the bigger strategic plan.

Option C is the correct answer.

Learn more about Strategy here:

https://brainly.com/question/24462624

#SPJ4

The complete question is, "Tactical planning usually involves which level of management?

a. middle

b. top

c. middle and top

d. operational"

Propeller blade tracking is the process of determining the exact position and orientation of each blade of a propeller in relation to one another and the hub.

This is important for several reasons. First, any deviation from the correct position can cause vibration, which not only reduces efficiency but also can lead to damage or failure of the propeller or the engine. Additionally, a propeller that is not properly tracked can produce unequal thrust, which can cause the aircraft to veer off course or experience handling difficulties.

Therefore, it is crucial to ensure that all blades are properly aligned and balanced, and that any necessary adjustments are made to achieve optimal performance and safety. This is typically done by using specialized equipment to measure the position of each blade and make necessary adjustments until they are all in perfect alignment.

Learn more about propeller here:

brainly.com/question/30113248

#SPJ11

Typically, payroll is not included in a full-featured financial management system. However, it can be integrated with the system as an add-on feature. The general ledger and cash management are usually included as core components of a financial management system. The correct option is B.

A full-featured financial management system is a software package that helps businesses manage their financial operations. It typically includes a range of functions such as accounts payable, accounts receivable, general ledger, cash management, and payroll.

The general ledger module records all financial transactions and provides the basis for producing financial statements, while the accounts payable module manages the payment of bills and invoices owed by the business. The accounts receivable module tracks money owed to the business by customers and helps to manage the collection of payments. The cash management module tracks cash balances and transactions, including bank deposits and withdrawals.

The payroll module manages employee salaries, benefits, and taxes. It typically includes functions such as calculating employee pay, generating paychecks, and filing tax reports. While all of these functions are typically included in a full-featured financial management system, some businesses may choose to use specialized software for certain functions, such as payroll processing.

The correct option is B.

Learn more about Financial management: https://brainly.com/question/989344

#SPJ11

The profit maximizing quantity (Q) and price (P) can be calculated using the following formula:

Q = MR = MC and P = D(Q)

In order to calculate profit maximizing quantity and price using total revenue relating to intermediate business microeconomics, the following steps should be followed:

1: Determine the total revenue (TR) curve of the firm using the data given in the question. This can be done by multiplying the quantity (Q) by the price (P) of the product.

2: Identify the point at which the slope of the TR curve is equal to zero. This is the point where the marginal revenue (MR) curve intersects the horizontal axis. The MR curve can be calculated by taking the first derivative of the TR curve with respect to Q.

3: Determine the quantity (Q) at which the MR curve intersects the marginal cost (MC) curve. This is the profit maximizing quantity of the firm. The MC curve can be calculated using the data given in the question.

4: Determine the price (P) at which the profit maximizing quantity (Q) can be sold. This can be done by looking at the demand curve of the product and finding the price that corresponds to the profit maximizing quantity (Q).

The demand curve can be calculated using the data given in the question

.The profit maximizing quantity (Q) and price (P) can be calculated using the following formula:

Q = MR = MC and P = D(Q)

Where:

Q = Quantity

MR = Marginal revenue

MC = Marginal cost

P = Price

D(Q) = Demand curve

Learn more about marginal revenue at:

https://brainly.com/question/14040343

#SPJ11

Answer: B) Vendors is not one of the five main variables affecting project success.

Explanation:

The five main variables affecting project success, often referred to as the "Project Management Triangle," are time, cost, quality, scope, and risk. Vendors are not typically considered one of the main variables affecting project success.

Time refers to the schedule or timeline for completing the project, cost refers to the budget or resources allocated to the project, quality refers to the level of excellence or standards for the project's deliverables,

scope refers to the objectives and goals of the project, and risk refers to the likelihood and potential impact of unexpected events or obstacles.

Effective project management involves balancing these five variables to ensure successful completion of the project. If any one of these variables is not managed effectively, it can negatively impact the overall success of the project.

To know more about Vendors refer here

https://brainly.com/question/28580521#

#SPJ11

The amount of advertising cost that should be allocated to the Grinding department for the current period is $42,000.

To calculate this, we will use the following information:
- Total advertising cost: $70,000
- Drilling department sales: $380,000
- Grinding department sales: $570,000
- Total sales: $950,000
We will use the percentage of total sales as the allocation base for advertising cost. First, find the percentage of sales for each department:
Grinding department's sales percentage = (Grinding sales / Total sales) * 100
= ($570,000 / $950,000) * 100
= 60%
Next, allocate the advertising cost to the Grinding department:
Allocated advertising cost to Grinding = Total advertising cost * Grinding department's sales percentage
= $70,000 * 60%
= $42,000

In summary, the amount of advertising cost that should be allocated to the Grinding department for the current period is $42,000.

Learn more about sales click here:

https://brainly.com/question/25743891

#SPJ11

The total amount of stock that a corporation's charter allows it to issue is referred to as D) Authorized stock.

This term refers to the maximum number of shares that a corporation is allowed to issue according to its charter or articles of incorporation.

It is important to note that authorized stock is not necessarily the same as issued or outstanding stock, which refers to the actual number of shares that have been sold or are currently in circulation.

Therefore, the authorized stock represents the potential for future stock issuances if the corporation decides to do so.

Know more about the Authorized stocks here:

https://brainly.com/question/31091008

#SPJ11

Protectionism in the form of a $3 tariff is a type of trade barrier that is imposed by a country on imported goods to protect its domestic industries. The tariff increases the price of the imported goods, making them less competitive than domestic goods, which may lead to a decrease in the volume of imports.

The impact of a $3 tariff on the volume of imports will depend on several factors, including the elasticity of demand for the imported goods, the availability of substitute goods, and the competitiveness of domestic industries.If the demand for the imported goods is highly elastic, meaning that consumers are very sensitive to price changes, a $3 tariff may significantly reduce the volume of imports. In this case, consumers may switch to substitute goods or reduce their overall consumption of the imported product. For example, if a $3 tariff is imposed on imported bananas, consumers may choose to buy domestic fruits or reduce their overall fruit consumption.On the other hand, if the demand for the imported goods is inelastic, meaning that consumers are less sensitive to price changes, a $3 tariff may have a smaller impact on the volume of imports. In this case, consumers may continue to purchase the imported goods despite the price increase. For example, if a $3 tariff is imposed on imported luxury cars, consumers who value the prestige associated with these cars may continue to buy them despite the price increase.

To know more about goods visit:

brainly.com/question/12802278

#SPJ11

An insurance policy being a contract of adhesion means that it is a standardized agreement that is offered on a "take it or leave it" basis, with little room for negotiation.

This can have several effects on the insured. Firstly, the insurer can refuse to pay claims unless the insured has complied with all policy provisions. This means that if the insured fails to follow any of the policy requirements, the insurer can deny the claim. Secondly, the insured cannot assign the policy without the insurer's consent, which limits their ability to transfer ownership or rights to the policy. Thirdly, the insurer can require the insured to pay any premiums, and the insured cannot negotiate the premium amount. However, there is one potential benefit to the insured in a contract of adhesion. If a policy contains any ambiguities or uncertainties, the insured typically gets the benefit of the doubt. This means that in cases of uncertainty, the courts will generally interpret the policy in favor of the insured.

To know more about insurance policy visit :-

https://brainly.com/question/7383156

#SPJ11

To determine the amount of cash paid for purchases by Jet during 2013, we need to use the formula for cash flow from operating activities which is:

Net cash flow from operating activities = Cash receipts from customers - Cash paid to suppliers
First, we need to calculate the cash receipts from customers which can be derived from the sales figure given in the financial statements.

Therefore, cash receipts from customers = Sales + Decrease in accounts receivable
= $57.2 + (-$10.4) = $46.8 million
Next, we need to calculate the cash paid to suppliers which is the cash outflow for purchases. This can be calculated using the cost of goods sold figure and the changes in inventory and accounts payable. Therefore, cash paid to suppliers = Cost of goods sold - Decrease in inventory + Increase in accounts payable
= $36.9 - (-$6.4) + $7.4 = $50.7 million
Finally, we can calculate the net cash flow from operating activities by subtracting the cash paid to suppliers from the cash receipts from customers. Therefore, the amount of cash paid for purchases by Jet during 2013 is:
Net cash flow from operating activities = Cash receipts from customers - Cash paid to suppliers
= $46.8 million - $50.7 million
= -$3.9 million (negative cash flow)
This indicates that Jet Company paid out more cash for purchases than they received from customers during the year 2013.

To learn more about cash flow refer:

https://brainly.com/question/27994727

#SPJ11

According to goal-setting theory, managers should assign challenging goals to motivate employees.

This theory suggests that setting specific and challenging goals for employees can lead to increased motivation, engagement, and performance.

When goals are clear and challenging, employees are more likely to feel a sense of purpose and direction in their work, and they are more likely to be committed to achieving those goals.
However, it's important to note that simply assigning challenging goals is not enough.

To effectively motivate employees, managers need to ensure that these goals are achievable, relevant to the employee's job and skill set, and provide feedback and support throughout the process.

Without these elements, employees may feel overwhelmed, demotivated, or discouraged by goals that are too challenging or unattainable.
In addition, managers should also consider the individual needs and preferences of their employees when setting goals.

While some employees may thrive on high-pressure, challenging goals, others may feel more motivated by goals that are more attainable or aligned with their personal values and interests.

Know more about goal-setting theory here:

https://brainly.com/question/13923637

#SPJ11

False. The fundamental tenet of the lean philosophy is to eliminate waste and increase efficiency in production processes. Seniority-based pay is not a core principle of the lean philosophy.

The lean philosophy originated from the Toyota Production System and emphasizes the importance of continuous improvement, respect for people, and creating value for customers. It advocates for the elimination of any activity or process that does not add value to the end product, thus minimizing waste and increasing efficiency.

The pay structure in a lean organization is typically based on the value that each worker brings to the production process, rather than seniority. This approach incentivizes workers to improve their skills and contribute more to the organization's success, which in turn benefits both the worker and the company.

Learn more about Philosophy:

brainly.com/question/12450703

#SPJ11

To create a portfolio that is equally invested in a risk-free asset and two stocks and equally as risky as the overall market, the second stock must have a beta of 1.17.

Beta measures the sensitivity of a stock's returns to the overall market returns. A beta of 1 indicates that the stock moves in line with the market. In this scenario, the first stock has a beta of 0.83, which means it is less risky than the market. To balance the portfolio's risk and make it equally as risky as the overall market, the second stock should have a beta that compensates for the first stock's lower beta. Since the first stock has a beta below 1, the second stock should have a beta above 1. In this case, the second stock must have a beta of 1.17 to achieve an equal level of risk as the overall market.

You can learn more about beta at

https://brainly.com/question/2168832

#SPJ11

False. the cost per exposure of most online advertising channels is difficult to account

The cost per exposure of most online advertising channels is not difficult to account for. In fact, one of the advantages of online advertising is that it allows for precise measurement and tracking of ad performance, including the cost per exposure. Online advertising platforms typically provide detailed analytics that allow advertisers to track the number of impressions (exposures) an ad receives and the cost associated with each impression.

Additionally, with the use of cookies and other tracking technologies, advertisers can track user behavior and target their ads more effectively, which can lead to higher conversion rates and a better return on investment. Therefore, the cost per exposure of most online advertising channels is not difficult to account for.

Learn more about online advertising here

https://brainly.com/question/29629214

#SPJ11

The cost difference between two alternatives or solutions is referred to as net incremental cost. More specifically, it refers to the extra expense involved in selecting one alternative over another. The net incremental cost or savings of buying from the outside supplier can be calculated by comparing the total cost per unit for Wheeler Company to produce the product versus the cost per unit offered by the outside supplier.

For Wheeler Company, the total cost per unit is the sum of the direct materials cost, direct labour cost, and overhead cost, which is $10.90 + $24.90 + $16.90 = $52.70 per unit.

If Wheeler buys from an outside supplier, it will incur 40% of its overhead cost, which is $6.76 per unit. Therefore, the total cost per unit for Wheeler to buy from the outside supplier would be $49.04 + $6.76 = $55.80 per unit.

To calculate the net incremental cost or savings of buying, we need to compare the two costs per unit. The cost per unit for Wheeler Company to produce the product is $52.70, while the cost per unit for buying from the outside supplier is $55.80.

Therefore, the net incremental cost of buying from the outside supplier is $55.80 - $52.70 = $3.10 per unit. In other words, if Wheeler Company buys from an outside supplier, it will save $3.10 per unit compared to producing the product in-house.

To know more about Incremental Cost visit:

https://brainly.com/question/28167612

#SPJ11

The Federal Trade Commission Act is a law that prohibits unfair methods of competition.

The Federal Trade Commission (FTC) Act was enacted in 1914 to protect consumers from anticompetitive practices such as monopolies, price fixing, and deceptive advertising. The act established the Federal Trade Commission as an independent agency responsible for enforcing antitrust laws and preventing unfair business practices. The act prohibits unfair methods of competition, which includes practices that harm competition and consumers. This can include price discrimination, false advertising, and deceptive trade practices. The act also restricts certain practices, such as exclusive dealing, tying contracts, and interlocking boards of directors, that may limit competition. However, the act does not address issues such as digital file copying or the removal of trade barriers.

Learn more about Federal Trade Commission Act here

https://brainly.com/question/30006568

#SPJ11

The statement is incorrect. "Chart of Accounts" is not a transaction category in QuickBooks. Rather, it is a list of all the accounts that a business has set up to record its transactions.

These accounts are organized into categories such as assets, liabilities, equity, income, and expenses.

The four main transaction categories in QuickBooks are:

Customers: This category includes transactions related to sales to customers, such as invoices, sales receipts, and refunds.

transaction : This category includes transactions related to purchases from vendors, such as bills, checks, and purchase orders.

Employees: This category includes transactions related to payroll and employee expenses, such as paychecks, payroll tax payments, and expense reports.

Banking: This category includes transactions related to the business's bank and credit card accounts, such as deposits, withdrawals, and credit card charges.

Each transaction in QuickBooks is assigned to one of these categories to help organize and track the financial activity of the business.

Learn more about transaction  here:

https://brainly.com/question/24730931

#SPJ11

dollar price of the zero coupon bond with 21 years to maturity, semiannual compounding, and a par value of $1,000, with a YTM of 5% is $430.34.

To calculate the dollar price of a zero coupon bond with 21 years to maturity, semiannual compounding, and a par value of $1,000, we need to use the formula for present value of a bond:
PV = FV / (1 + r)^n
where PV is the present value of the bond, FV is the par value of the bond, r is the yield to maturity (YTM) of the bond, and n is the number of periods until maturity.Since the bond is a zero coupon bond, it does not make any coupon payments. Instead, it is purchased at a discount to its par value and the investor receives the full par value at maturity. Therefore, the PV of the bond is the price that the investor pays to purchase the bond.
Now, we are given that the YTM is unknown. To calculate the YTM, we need to use the trial and error method or a financial calculator. For simplicity, we will assume that the YTM is 5%.
The number of periods until maturity is 21 years with semiannual compounding. Therefore, the number of periods is 21 x 2 = 42.
Using the formula for PV, we get:
PV = $1,000 / (1 + 0.05/2)^42
PV = $1,000 / (1.025)^42
PV = $1,000 / 2.3228
PV = $430.34
To know more about bond visit:

brainly.com/question/31994049

#SPJ11

The initial price of the bond with par value of $10,000 and annual coupon of 8% is equal to $6,114.69.

Par value of the bond = $10,000

Annual coupon = 8 percent

To calculate the initial price of the bond,

Determine the present value of its future cash flows.

The bond has a par value of $10,000 and promises to pay an 8% annual coupon.

This means that the bond will pay ,

8% of $10,000 = $800 as an annual coupon payment.

The bond matures in 25 years, so it will make 25 coupon payments of $800 each, plus the par value of $10,000 at maturity.

To calculate the present value of these cash flows,

Use the formula for the present value of an annuity,

PV = C × (1 - (1 + r)⁻ⁿ) / r

Where,

PV = Present Value

C = Coupon payment

r = Yield to maturity

n = Number of periods

Here, the coupon payment (C) is $800,

the yield to maturity (r) is 11.3% (or 0.113 as a decimal),

and the number of periods (n) is 25.

Plugging in these values, calculate the present value,

PV = $800 × (1 - (1 + 0.113)⁻²⁵) / 0.113

⇒ PV ≈ $800 × (1 - 0.1363) / 0.113

⇒ PV ≈ $800 × 0.8637 / 0.113

⇒ PV ≈ $6,114.69

Therefore, the initial price of the bond is approximately $6,114.69.

learn more about bond here

brainly.com/question/30347494

#SPj4

it is important to use multiple methods and sources of information when forecasting financial statements.

The assumption embodied in the percent of sales method is that accounts payable and accruals are tied directly to sales. The percent of sales method, also known as the income statement method, is a technique used to forecast financial statements by using a percentage of the previous year's sales. This method assumes that certain accounts, such as accounts payable and accruals, are directly related to the level of sales. As sales increase, the amount of these accounts also increases in proportion to the increase in sales. The percent of sales method is a commonly used technique in financial forecasting, as it is relatively simple to use and requires minimal information. However, it is important to note that this method is based on assumptions and historical data, and may not accurately predict future financial results. Therefore, it is important to use multiple methods and sources of information when forecasting financial statements.

Learn more about forecasting here

https://brainly.com/question/21445581

#SPJ11

When BMW, a German company, purchases a welding machine that was made in Toronto, the purchase is a German import and a Canadian export. The correct option is B).

This is because the welding machine was made in Canada and then sold to Germany, which means that Canada has exported a good to Germany, and Germany has imported a good from Canada.

An import is defined as the purchase of goods or services from a foreign country, while an export is the sale of goods or services to a foreign country.

In this case, the welding machine was produced in Canada, making it a Canadian product, and it was purchased by BMW, a German company, making it an import for Germany.

At the same time, the welding machine was sold by a Canadian company to a German company, making it an export for Canada.

It's important to note that imports and exports are not necessarily equal in value, as the value of imports can exceed the value of exports, or vice versa, resulting in a trade deficit or a trade surplus.

However, in the case of a single transaction like the purchase of a welding machine, the value of the import and the export should be equal.

In summary, when BMW, a German company, purchases a welding machine that was made in Toronto, the transaction is considered a German import and a Canadian export. Therefore, the correct option is B).

To know more about BMW, refer to the link :

https://brainly.com/question/30174625#

#SPJ11