Answer:
ethology
Explanation:
I just looked it up
Which would cause postsynaptic stimulation to end?.
Options:
A. They depend on the myelination of nerve axons
B. They include EPSPs and IPSPs
C. They are changes in the membrane potential of the postsynaptic terminal of a chemical synapse
D. They are caused by neurotransmitters
Answer:
They include EPSPs and IPSPsThey are changes in the membrane potential of the postsynaptic terminal of a chemical synapseThey are caused by neurotransmitters. Thus, the correct option is B, C, D.What is postsynaptic stimulation?An additional neuron known as a fascilitator is triggered when the postsynaptic neuron receives an unconditioned stimulation. The presynaptic neuron then responds to this cell, leading to sensitization.
When the neurotransmitter separates from its receptor, postsynaptic potentials start to be terminated. After that, the receptor is free to resume its original structural form. The receptor will now reopen ion channels that were opened when the neurotransmitter was attached to it.
For more information regarding postsynaptic stimulation, visit:
https://brainly.com/question/9632702
#SPJ1
Which of the following form(s) zygote (2n)?
Sperm + Ovum
n + n
Male gamete + Female gamete
All of the choices
Answer:
All of the choices
Explanation:
The n stands for 23 chromosomes, every cell has 46 chromosomes so 2n.
Male and female gametes have just n (23 chromosomes)
n + n = 2n
sperm and ovum are synonyms for the gametes
In general, how might recombinant dna technology be used to prevent a genetic disorder caused by a mutation in a single gene?.
Recombinant DNA technology is used to prevent a genetic disorder caused by a mutation in a single gene by reinserting nucleotide sequences in a normal linear order.
What is a gene?A gene is a fragment of single-stranded DNA that is used during transcription and translation to produce a protein.
A mutated gene has a different nucleotide sequence when compared to the normal gene, which can be corrected by using recombined normal sequences.
In conclusion, recombinant DNA technology is used to prevent a genetic disorder caused by a mutation in a single gene by reinserting nucleotide sequences in a normal linear order.
Learn more about recombinant DNA technology here:
https://brainly.com/question/5996835
#SPJ1
Which act prompted the developers to install stormwater management systems to handle the movement of polluted water? The_______prompted the developers to install stormwater management systems to handle the movement of polluted water.
US clean water act as a prompted the developers to install stormwater management systems to handle the movement of polluted water.
What is the role of us clean water act?The Clean Water Act (CWA) establishes the fundamental framework for controlling pollution discharges into American waters and setting quality criteria for surface waters.
In 1972, the US Clean Water Act was adopted. The Act's principal goal was to control and minimize the entry of pollutants into water bodies. This was done to make the water bodies cleaner, clearer, and more suitable for usage by the general public and the abundant life forms that were already present.
In order to handle the removal of contaminated water from the water bodies, the developers decided to install stormwater management systems.
Learn more about storm management here:
https://brainly.com/question/13322827
#SPJ1
The type of transcriptional control in operons in which a regulatory protein is an activator and stimulates transcription is called.
The type of transcriptional control in operons in which a regulatory protein is an activator and stimulates transcription is called positive control.
What controls the transcription of an operon?The regulatory DNA sequences are the important class of factors that controls the transcription of an operon.
The types of transcriptional control in operons in which a regulatory protein is an inhibitor and inhibits transcription are called negative control.
Therefore, the positive control and negative control of the transcription of an operon depend on the nature of regulatory proteins.
To learn more about Lac operon, refer to the link:
https://brainly.com/question/1619875
#SPJ1
Groundwater Activity: Properties of Water Lab Report
Introduction
Water is an essential part of processes on Earth. In this lab, you will investigate the properties of water and explain how they affect Earth material and surface processes.
Investigative Phenomenon:
What are the connections between the properties of water and their effects on Earth materials and surface processes?
Materials:
• water
• stopwatch
• a clean penny
• food coloring
• vegetable oil
• clear plastic cups
• dropper or pipette
• ice cube
• black pepper
• a bowl
• dish soap
• sponge or cloth
• a heating source (sunlight, lamp, etc.) or a cooling source (refrigerator)
• one balloon
• measuring tape or string and a ruler
• thermometer
Activity One: Investigating Cohesion
Cohesion is the ability of molecules to bind together. One way to test this is by investigating how the droplets of a particular liquid stick together compared to other liquids. Use the materials you have to determine water’s relative cohesion on a particular surface.
Describe the plan you will follow to determine this:
Record your data and observations:
Phenomena Reflective Question: How does the cohesive property of water come into play with it interacts with Earth materials?
Activity Two: Investigating Surface Tension
Surface tension is a property of a liquid that allows the surface to resist force. This means the surface of a liquid resists the weight of objects.
Procedures:
1. Fill a bowl ¾ full with tap water.
2. Sprinkle about a teaspoon of ground black pepper in the bowl. DO NOT STIR! Observe what happens to the black pepper.
3. Gently place your finger into the water and observe what happens.
4. Put two drops of dish soap on your finger. Gently use your finger to touch the surface of the water and observe what happens.
Data and observations:
Observations
Black pepper in water
Touching water without soap
Touching water with soap
Phenomena Reflective Question: How does the surface tension of water allow for it to interact with Earth materials?
Activity Three: Investigating Solubility
A liquid is polar, which means a substance can easily dissolve in it. How can you test water’s polarity compared to other substances? To measure solubility, it is necessary to compare initial and final results using your visual observations.
Describe the plan you will follow to determine this:
Record your data and observations: Add food coloring to each liquid. Observe each reaction and record your observations in the table below.
Time Water Vegetable Oil
0 seconds
5 seconds
10 seconds
15 seconds
20 seconds
Phenomena Reflective Question: Explain why water is called a universal solvent. How does this polarity allow for water to interact with Earth materials?
Activity Four: Investigating Specific Heat Capacity
Specific heat is the amount of heat energy needed to change the temperature of 1 gram of the substance one degree Celsius. Some objects' specific heat allows them to heat up or cool down faster than others of equal mass. How can you compare water’s specific heat to other substances? How does the specific heat of water affect how other objects, such as a damp cloth, warm up or cool down? To measure specific heat, it is necessary to compare initial and final results.
Describe the plan you will follow to determine this:
Record your data and observations: Observe the temperature of the damp sponge/cloth after being placed under a heat source. Caution: do not set the damp sponge or cloth to close to the heat source. Record your observations.
Time Damp Sponge/Cloth
0 seconds
5 seconds
10 seconds
15 seconds
20 seconds
Phenomena Reflective Question: How does water’s specific heat capacity come into play when it interacts with Earth materials or affect surface processes?
Activity Five: Investigating Expansion and Density
Density of an object can be found by calculating mass divided by volume. If two objects have the same mass, but one has a greater volume, the object with more volume is less dense. Does water’s density change when it is frozen?
Describe the plan you will follow to determine this:
Record your data and observations:
Phenomenon Reflective Question: Did the density of water change when it changed from solid to liquid? How do you think the density of water has an effect on Earth materials and surface processes?
Evaluating the Design:
Part of an investigation is to evaluation how well your investigation gave you the data you needed. In this report, include the following:
1. an evaluation of the plan you made for the various activities and how the data was collected
2. a description of how well the data allowed you to infer the effect of water on materials and processes in the world
3. a description of how to further investigate the effects of water and collect more accurate and precise data
Answer:
Explanation:
Both Groundwater and surface water are largely replenished by rain water.
What is the differences between mitosis and meiosis and explain why there is meiosis 1 and 2 in cell division but this is not happening with mitosis
Answer:
Explanation:
Cells divide and reproduce in two ways, mitosis and meiosis.
Mitosis results in two identical daughter cells, whereas meiosis results in four cells.
Keys differences and similarities between the two types of cell division.
Mitosis Meiosis
cells created: two daughter cells four daughter cells
Ploidy Creates diploid daughter cells Creates haploid daughter cells
Genetics Daughter cells are Daughter cells are . . genetically identical genetically different
Why is there a meiosis II but not mitosis II?
Meiosis II is generally regarded as being very similar to mitosis, except for the presence of two parent cells, instead of only one. In both meiosis I and II, cytokinesis occurs, and there are two daughter cells per parent cell.
Acid precipitation can dissolve aluminum from soil. As aluminum is dissolved, it can flow into lakes and contaminate the water. High concentrations of aluminum in
lakes is fatal to many forms of aquatic life. This scenario provides evidence for which of theseconcepts?
A. Environmental change always has a negative impact on organisms.
B. Acid rain is the most important environmental problem to address.
C. Acid rain is the leading cause of death to fish in lakes.
D. Environmental change can impact the quality of life for living organisms.
The scenario described provides evidence for option D: Environmental change can impact the quality of life for living organisms.
The passage explains how acid precipitation, commonly known as acid rain, can dissolve aluminum from soil. This dissolved aluminum can then flow into lakes, resulting in contamination of the water.
High concentrations of aluminum in lakes can be fatal to many forms of aquatic life. This evidence supports the concept that environmental change can have a detrimental impact on living organisms.
Option A is incorrect because the passage does not suggest that environmental change always has a negative impact on organisms. While the scenario highlights a negative consequence of acid rain on aquatic life, it does not generalize this impact to all environmental changes.
Option B is also incorrect because the passage does not claim that acid rain is the most important environmental problem to address. It solely focuses on the specific issue of aluminum contamination in lakes due to acid rain.
Option C is incorrect because the passage does not state that acid rain is the leading cause of death to fish in lakes. It highlights the detrimental effect of high aluminum concentrations, but it does not compare it to other potential causes of fish death in lakes.
Therefore, the most appropriate concept supported by the scenario is option D, which acknowledges that environmental change can impact the quality of life for living organisms based on the example of aluminum contamination in lakes due to acid precipitation.
For more such answers on Organisms
https://brainly.com/question/17259533
#SPJ8
which list of names is the correct order for filing in an alphabetic system?
The list of names in the correct order using the alphabetic system will have the names listed from the letters A to Z.
What is the correct ordering of names in an alphabetic system?An alphabetic system is a system which orders items based on the ordering of alphabets.
The alphabets in English language are 26 in number from A to Z.
Since no names were provided, the list of names in the correct order using the alphabetic system will have the names listed from the letters A to Z.
Leran more about alphabetic system at: https://brainly.com/question/18800951
#SPJ12
Microbial control methods usually target any of the following cellular components except which one?.
Microbial control methods usually target any of the following cellular components except the mitochondria. option D
What are microbial control methods?Microbial control methods are methods aimed at the causation of ineffectiveness of microorganisms.
They could be physical or chemical methods.
Some microbial control methods include high or low temperature, drying, osmotic pressure, filtration, radiation, etc.
These methods target cell components that are not found in humans.
Therefore, microbial control methods usually target any of the following cellular components except the mitochondria
The options are
a. plasma membrane permeability
b. nucleic acids
c. microbial proteins
d. mitochondria
Learn more about the mitochondria here:
https://brainly.com/question/13912115
#SPJ1
which of the following was a social cost associated with the devolpment of the internal combustion engine used in most cars?
Option:
A. People were able to use their horses for new tasks.
B. New jobs were created.
C. Blacksmiths needed to gain new skills to continue working.
D. Families were able to travel farther more easily.
Answer:
Blacksmiths needed to gain new skills to continue working. Thus, the correct option is C.
What engineer Nikolaus August Otto developed?Engineer Nikolaus August Otto developed the first four-stroke internal combustion engine and established the Otto cycle, a well-known theoretical cycle that governs the operation of explosive engines.
Otto's engine outperformed the steam engine in use at the time in a number of ways. One of them is their light weight, as steam engines need large water reservoirs and fuel to burn in order to heat the water, which in this case would be charcoal or firewood. In addition to being light, the internal combustion engine consumed little fuel, even benzene. Another factor was Otto cycle internal combustion engines' power, which also outperformed steam engines in terms of size ratio.
These benefits put pressure on the automotive sector to build vehicles with this kind of technology. Blacksmiths were compelled to learn new skills in order to use this new technology.
In addition to being light, the internal combustion engine consumed little fuel, even benzene. Another reason was Otto cycle internal combustion engines' power, which also outperformed steam engines in terms of size ratio.
For more information regarding Blacksmiths, visit:
https://brainly.com/question/15145423
#SPJ1
Name three industries in the North?
Certain preparations contain killed or weakened live biological agents that, upon injection into our body, protect the body against those pathogens. what are these preparations called? a. vaccines b. enzymes c. t cells
Chromosomes contain different amounts of:
Answer:
DNA srry if im wrong
Explanation:
Answer:
DNA
Explanation:
A chromosome is made up of proteins and DNA organized into genes. Each cell normally contains 23 pairs of chromosomes.
the cause of shin splint is usually due to ____ .
The cause of shin splints is usually (or generally) due to Overuse.
What is a shin splint?A shin splint refers to a health problem associated with pain in the tibia/shin bone.
The tibia bone is very large and its pain is a serious problem, thereby shin splint would be treated immediately.
In conclusion, the cause of shin splints is usually (or generally) due to Overuse.
Learn more about shin splint here:
https://brainly.com/question/13606769
#SPJ12
Dihybrid crosses
1. In man, assume that spotted skin (S) is dominant over non-spotted skin (S) and that wooly hair (W) is dominant over non-wooly hair (W). cross a marriage between a heterozygous spotted, non-wooly man with heterozygous wooly-haired, non-spotted woman. Give genotypic and phenotypic ratios of offspring?
Explanation:
The phenotypes and genotypes of the progeny can be determined by a dihybrid cross of the parents.
The heterozygous male will have the genotype 'SSww' and the heterozygous female will have the genotype 'ssWW'.
When crossed, the F1 offsprings will have a hybrid genotype of 'SsWw'. These offsprings are heterozygous with spotted skin and wooly hair.
On self-crossing of the F1 hybrids, we find four different combinations of the alleles- SW, Sw, SW and sw. The probability of getting each of these combinations is 1/4.
Hence, the probability of any dihybrid type is 1 out of the 16 possible genotypes. Using Punnet square, we find
9 SSWW: 3 SSww: 3 ssWW : 1 ssww
This is the phenotypic ratio of the offsprings.
The ratio of the possible genotypes will be 1:2:1:2:4:2:1:2:1.
Cellulose is a starchy carbohydrate.
Which of these statements about
cellulose is TRUE?
A. Cellulose is rarely found on Earth.
B. Cellulose is a type of fat.
C. Cellulose is a complex carbohydrate.
D. Cellulose dissolves easily in water.
Answer:
the answer is d
Explanation:
because as the first statement tell you it is a carbohydrate so B is eliminated .
and we know that it is found in plants so A is eliminated too.
and it makes cell wall and can not easily dissolve in water and d is eliminated so definitely the answer is C
The true statement about cellulose is a complex carbohydrate. The correct option is C.
What is cellulose?Cellulose is a glucose-based linear polymer (polysaccharide) that is found in nature. Its chemical formula is (C6H10O5)X. Plants typically produce it through synthesis.
The primary characteristics of this polysaccharide are biodegradability and hydrolysis resistance. The sturdy formation of plant cell walls is greatly aided by cellulose, a hard, fibrous, and water-insoluble polysaccharide. 20.
The fibrils (bundles of microfibrils) and microfibrils (bundles of polysaccharides) made up of cellulose chains make up the plant cell wall. It is colorless and tasteless.
Therefore, the correct option is C. Cellulose is a complex carbohydrate.
To learn more about cellulose, refer to the link:
https://brainly.com/question/5957180
#SPJ2
A blood alcohol concentration of. 08 indicates that _____ percent of your blood is alcohol.
A blood alcohol concentration of. 08 indicates that 0.08% of your blood is alcohol.
Any driver who's stopped by a law enforcement officer and found to have a breath or blood alcohol level of .08 or higher will, at the time of the arrest?Any driver who's stopped by a law enforcement officer and found to have a breath or blood alcohol level of .08 or higher will, at the time of the arrest will have their driving privilege suspended. Depending on what occurs, the suspension will change from shorter to longer, and vice versa.
Thus, 0.08% of your blood is alcohol.
To learn more about alcohol. click here:
https://brainly.com/question/4698220
#SPJ1
What is the lock and key theory?
Lock and key theory states that enzymes have a specific shape that directly correlates to the shape of the substrate.
What is the lock and key theory of enzymes?Enzymes are globular protein that catalyses a biological chemical reaction.
One of the characteristics of enzymes is that they are usually substrate-specific i.e. They bind and act to a particular substrate.
This characteristics is explained by the lock and key theory of enzymes, which states that enzymes have a specific shape that directly correlates to the shape of the substrate.
Learn more about enzymes at: https://brainly.com/question/17320375
#SPJ12
Fossil fuels represent Group of answer choices a large amount of paleozoic and mesozoic biomass buried anaerobically millions of years ago. natural deposits of organic materials that formed long before life on Earth evolved. the remains of fossil animals that lived a few thousand years ago. sustainable sources of energy that are underused today.
Fossil fuels represent the remains of fossil animals that lived a few thousand years ago.
How fossil fuel are formed?Fossil fuels are formed from decomposition of plants and animals dead bodies. These fuels are found in the Earth's crust. It contain carbon and hydrogen, which can be burned for energy.
So we can conclude that Fossil fuels represent the remains of fossil animals that lived a few thousand years ago.
Learn more about fossil here: https://brainly.com/question/11829803
#SPJ12
Which of the following are true of a species? Select all that apply.
1 of 4 QUESTIONS
All fertile individuals can breed with one another.
Individuals vary genetically.
There is no natural selection occurring.
There is gene flow between populations.
Answer:
the 1rst and 2nd
Explanation:
all fertile individuals can breed with one another and individuals vary genetically
heyy
please help me with these answers
theyre quite simple but i dont really know how to explain the answers
1. Tulips are pollinated by insects. explain three ways the flower is adapted for this type of pollination
2. explain the differences in the types of pollen produced by insect-pollinated amd wind-pollinated plants.
thankss
1. Bees, flies, wasps, butterflies, and moths are significant insect pollinators. Moths are drawn to white flowers that are open at night, but bees and butterflies are drawn to brilliantly colored blooms with powerful scents that are open during the day.
What is pollination?The act of moving pollen grains from an anther to a flower's stigma is called pollination. Flowers that are pollinated by insects typically generate a sweet nectar that the insects visit to consume. If a flower is self-pollinating, fertilization occurs when pollen stock from an insect contacts the stigma of the bloom. If the bug is bisexual, it will fly to another bloom and disperse the pollen.
2. Most flowers advertise themselves by being brightly colored and perched on long stems so they wave in the air and are closer to where insects are flying, as opposed to on the ground, where they would otherwise be. A flower's petal sizes and shapes, in addition to color, can draw insects.
3. Flowers draw insects because of their aroma or vibrantly colored petals. Nectar is a delicious liquid that many flowers generate that is consumed by insects. The female part of the flower is the carpel.
Answer 2. Flowers that are pollinated by insects have characteristics that enable insects, birds, or other animals to pollinate them while consuming the nectar. When an insect brushes by the stigma of a flower, whether it is the same bloom or another, pollen grains will adhere to the insect's outer layer and stick to the flower's stigma, pollinating the flower. When the two seˣ cells combine, fertilization occurs, the ovule develops into a seed, and the ovary becomes a fruit. The pollen grain then grows a pollen tube down the style to reach the ovary, which contains the ovules.
For more information regarding pollination, visit:
https://brainly.com/question/20563422
#SPJ1
How does Hydrosphere affect atmosphere during Australia bushfire?
Soli reaction is ______
Answer:
soil reaction is an indication of the acidity or alkalinity of soil and is measured in pH units
Schools are looking for a balanced food option to serve their students.
they are looking for a food that has some carbohydrates, proteins, and lipids.
1. identify a food on the list that has some of each of the macromolecules.
2. explain how you know that the food has the macromolecules.
hint:
start your exploration with a food that is common in schools!
Schools have to give proper meals and carbohydrates to students.
What is a balanced diet?A balanced diet is one that includes a variety of foods in the right amounts and ratios to meet the body's needs for calories, proteins, minerals, vitamins, and other nutrients. A small portion of the diet is also set aside for extra nutrients to last through the brief period of leanness. In this situation, we must choose a unique menu that offers the
In this context, we have to first prepare the list of the number of carbohydrates, lipids, and proteins and then we have to identify the maximum amount required in the meal. then observe the common food in the school.
Learn more about a balanced diet here:
https://brainly.com/question/10669660
#SPJ1
Ms. Gates has recently become dually eligible for medicare and medicaid. She is very concerned about how this will affect her prescription drug coverage. What should you tell her?.
If Ms. Gates is eligible for both the Medicare and the Medicaid, then her drugs will be covered under part D. So, she should be informed that Medicare will generally cover the drugs. But the ones that are not covered will be covered under Medicaid.
The Medicare and Medicaid program are federal and state government program for the people who have limited assets and are 65 or older.
These program provides healthcare coverage to the people. The Medicare program although covers most of the drugs, but some drugs are excluded from the Medicare, these drugs are mostly covered by Medicaid program.
So, the Ms. Gates should be informed that all her drugs will be covered under the Medicare and Medicaid privileges.
Learn more about Medicare and Medicaid here:
brainly.com/question/11084349
#SPJ12
A ligamentous connection such as an antebrachial interosseous membrane is called a.
A ligamentous connection such as an antebrachial interosseous membrane is called a syndesmosis.
A fibrous joint called the syndesmosis is held together by ligaments. It is situated between the distal fibula, or outside leg bone, and the tibia, or shinbone, close to the ankle joint. It is also known as the distal tibiofibular syndesmosis for this reason.
syndesmosis is made up of a number of ligaments. The top three are:
Tibiofibular anterior inferior ligamentTibiofibular posterior inferior ligamentArticular cartilage ligamentTibiofibular transverse ligamentThe syndesmosis ligament supports and stabilizes your ankle by acting as a shock absorber. Its primary function is to keep the tibia and fibula in line and from extending outward too much.
learn more about syndesmosis here: https://brainly.com/question/15080589
#SPJ4
Which phrase used by the president was specifically chosen to convince the public to support the war?
“facts of yesterday”
“unprovoked and dastardly attack”
“have already formed their opinions”
“a state of war has existed”
The phrase used by the president was specifically chosen to convince the public to support the war is “unprovoked and dastardly attack”. Thus, option "B" is correct.
How, support your answer?President Roosevelt was in office when Pearl Harbor happened, and it was the perfect occasion that the government of the United States needed to enter a war that was clearly being won by the Germans and Japanese, they had already taken decisions prior to this to help the allies, but they couldn´t directly send troops when the bombings on Pearl Harbor took place, and since the USA had never provoked, attacked or done anything to upset Japan, they were now able to declare war on Japan an its allies.
Thus, option "B" is correct.
To learn more about President Roosevelt click here:
https://brainly.com/question/14014275
#SPJ1
Answer:
B
Explanation:
Did the assignment
How did the Lumber industry contribute to the pollution in Sudbury (Located in Canada)
As of now Sudbury has some of the cleanest air in all of Ontario. That’s hard to believe given the city once emitted 2.5 million tonnes of sulfur dioxide per year due to the Lumber industry. In the 1980s, the “Sudbury” became known as a unit of pollution, against which other industrial cities were measured. It’s now become known as a unit of restoration.
Explain how activation energy is related to exothermic and endothermic reactions.
Activation energy is related to exothermic and endothermic reactions because in exothermic reaction activation energy is lower than in endothermic reactions.
What is an activation energy?Activation energy is defined as the energy that must be overcome for a chemical reaction to take place.
A chemical reaction can either be exothermic or endothermic reactions.
This activation energy is related to exothermic reaction because there is net energy release from the reaction while in the endothermic reaction there is net absorption to energy.
Learn more about exothermic reaction here:
https://brainly.com/question/1380484
#SPJ1
