*****Which would have one or more coordinate covalent bond: BCl3, NH4+, PCl5, AlCl6-3, BeCl2, SbCl6-, PCl3, TeF4, ClO4-.

SO3 only would exist as a set of resonance structures

Define resonance.

In valence bond theory, resonance, also known as mesomerism, is a means to describe bonding in specific molecules or polyatomic ions by combining numerous contributing structures into a resonance hybrid.

The electronic bonding of a single polyatomic species, including fractional bonds and fractional charges, is described by resonance structures, which are a collection of two or more Lewis structures.

There are three resonance configurations in sulfur trioxide. However, because all of the oxygen atoms in SO3 are equal, all of the structures are equivalent. Three oxygen atoms and one sulfur atom make up sulfur trioxide. With a bond angle of 120, sulphur is sp2 hybridized with a trigonal planar structure in SO3.

To learn more about resonance structures use:

https://brainly.com/question/28660681

#SPJ4

5.1g of iron is needed to prepare 11.86 g of the iron chloride product if, under the conditions of the reaction, the electron configuration of the iron cation in the product is 1s22s22p63s23p63d6

Define electronic configuration.

The distribution of electrons in an element's atomic orbitals is described by the element's electron configuration. Atomic electron configurations adhere to a standard nomenclature in which all atomic subshells that contain electrons are arranged in a sequence with the number of electrons they each hold expressed in superscript.

Only ferrous chloride (FeCl2) is produced when metallic iron is treated with hydrochloric acid. The other product released is hydrogen gas. Ferric chloride (FeCl3) is created when iron is heated in the presence of chlorine gas.

Fe + Cl2 → FeCl2

1 mole iron reacts to give 1 mole FeCl2

No. of moles of Fe and FeCl2 are 1.

55g of Fe produces 126g of FeCl2

So 11.86g of FeCl2 is formed from 55*11.86/126 i.e. 5.1g

To learn more about electron configuration use:

https://brainly.com/question/23390564

#SPJ4

Hydrocarbons [tex]C_{n} H_{2n+2}[/tex] When hydrocarbons are burned to create energy, the byproducts include carbon dioxide, which is produced by gasoline-burning engines and contributes to the rise in greenhouse gases.

Any hydrocarbon can be burned with oxygen to produce three byproducts: carbon dioxide, water, and heat, as illustrated in the general reaction below. When hydrocarbons are burned with oxygen ([tex]O_{2}[/tex]) present, carbon dioxide ([tex]CO_{2}[/tex]) and water ([tex]H_{2} O[/tex]) are produced. Carbon monoxide (CO) may also be released during the burning of hydrocarbons if there is an imbalance between the amount of carbon and oxygen present. Occasionally, incomplete combustion results in the release of unburned hydrocarbons into the atmosphere.

Read more about burns gasoline at

https://brainly.com/question/14745254

#SPJ4

Pikaia is considered to be one of the most significant fossils found in the Burgess Shale due to its unique characteristics. It is the only known Burgess Shale fossil that possesses an internal nerve cord.

Pikaia was a small, worm-like creature that lived over 500 million years ago. It was about five centimeters long and had a slender, elongated body with a series of segments. Its internal nerve cord was located on the dorsal side of its body and extended the length of its body.

The presence of an internal nerve cord in Pikaia is significant because it is an early indication of the evolution of a central nervous system, which is a defining feature of most animals today. Pikaia is therefore considered to be an important transitional form in the evolution of animals.

Overall, Pikaia's unique characteristic of possessing an internal nerve cord makes it an important fossil in understanding the evolution of animals and the development of nervous systems.

To know more about fossil

brainly.com/question/31419516

#SPJ11

The actions permitted in balancing a chemical equation are inserting coefficients in front of formulas of reactants and products and multiplying all coefficients by a common factor.

Balancing a chemical equation involves making sure that the number of atoms of each element is equal on both sides of the equation. This is done by inserting coefficients in front of formulas of reactants and products, which indicates the number of molecules or atoms of each substance involved in the reaction. Multiplying all coefficients by a common factor is also permitted, as long as it does not alter the relative ratios of the coefficients.

Adding reactants or products and altering the formulas of reactants or products are not permitted in balancing a chemical equation, as they would result in a different chemical reaction.

To know more about balancing a chemical equation, visit:

https://brainly.com/question/28294176

#SPJ11

According to quantum theory, the size of an atomic orbital is most directly associated with the principle quantum number (n). The correct option is a).

The principle quantum number describes the energy level of an electron in an atom, and as the value of n increases, the electron's energy and distance from the nucleus also increase. This means that the larger the value of n, the larger the size of the orbital.

The other quantum numbers, such as the angular momentum quantum number (l), the magnetic quantum number (ml), and the spin quantum number (ms), are all related to other properties of the electron, such as its shape, orientation, and spin, but they do not directly influence the size of the orbital.

Therefore, the principle quantum number is the most important factor in determining the size of an atomic orbital according to quantum theory.

To know more about quantum theory refer here:

https://brainly.com/question/4751848#

#SPJ11

An antacid tablet reacts in water, creating bubbles with clear liquid and clear gas.

The reaction of the antacid tablet with water produces a clear liquid (water) and a clear gas (most likely carbon dioxide). The bubbles that are observed are a result of the release of this gas during the reaction.

When an antacid tablet is added to water, a chemical reaction takes place between the active ingredients in the tablet and the water. The most common active ingredients in antacid tablets are bases, such as calcium carbonate, magnesium hydroxide, and sodium bicarbonate. When these bases react with the acid in the stomach, they neutralize it, relieving symptoms of heartburn and indigestion.

Therefore, based on the information given, option c is the best answer.

To learn about the chemical reaction:

https://brainly.com/question/11151455

#SPJ4

the correct answer is (d) KI.

What is conjugate base?

In chemistry, a conjugate base is the species that is formed when an acid loses a proton (H+). More specifically, the conjugate base of an acid is the species that remains after the acid has donated its proton.

When salts dissolve in water, they may produce acidic, basic, or neutral solutions depending on the nature of the ions present in the salt.

In general, salts that contain the conjugate base of a weak acid or the cation of a strong base will produce a basic solution when dissolved in water.

Among the given options, the salt KI contains the cation K+ which is the conjugate base of a strong acid (potassium hydroxide) and the anion I- which is a weak conjugate base of a weak acid (hydroiodic acid). Since the cation is not acidic and the anion is weakly basic, the resulting solution will be slightly basic. Therefore, the correct answer is (d) KI.

To know more about  conjugate base visit:

https://brainly.com/question/1888879

#SPJ4

The Valence Bond (VB) Theory is a quantum theory of chemical bonding which states that a chemical bond is formed when two atoms share a pair of electrons. The theory has three postulates:

Valence is a term used in psychology to describe the degree to which a person experiences an emotion, such as happiness or sadness. It is associated with the amount of pleasure or displeasure that one feels toward an event, object, or situation. Valence is measured on a scale from positive to negative, with positive emotions having a higher valence than negative emotions.

1. Hybridization: Hybridization is the process of combining atomic orbitals to form new hybridized orbitals with lower energy and new shapes. These hybrid orbitals are more stable and better suited for bonding than the original atomic orbitals.

2. Bond Formation: Bond formation occurs when two hybridized orbitals overlap and share a pair of electrons. This overlap creates a strong electrostatic attraction between the two atoms, which is the chemical bond.

3. Resonance: Resonance is the idea that the chemical bond between two atoms can be thought of as a combination of several different structures. These different structures can be represented by different resonance structures. Each resonance structure has a different energy and each can contribute to the overall strength of the bond.

To learn more about Valence

https://brainly.com/question/371590

#SPJ4

If the lid on the polystyrene cup had not been covering it during the experiment, much of the heat released by the neutralization process could have escaped into the atmosphere.

A calorimeter is a device used to measure the heat of chemical processes or physical changes, as well as heat capacity. Among the most frequent varieties are differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters, and accelerated rate calorimeters.

Calorimeter Types

Learn more about Calorimeters here:

https://brainly.com/question/2963957

#SPJ1

The solubility of a compound generally increases as the acidity of its environment increases. This is because acidic environments can disrupt the electrostatic interactions between molecules, allowing them to dissolve more readily.

Electrostatic is a type of force that is generated by the attraction or repulsion of electric charges. It is one of the four fundamental forces of nature and is the force responsible for most of the phenomena associated with electricity and magnetism. Examples of electrostatic forces can be seen in everyday life, such as when two pieces of paper stick together after being rubbed or when a balloon is rubbed against a wall.

Common compounds that increase in solubility when their environment becomes more acidic include salts such as sodium chloride (NaCl) and potassium chloride (KCl), as well as organic compounds such as sugars, amino acids, and proteins.

To learn more about electrostatic

https://brainly.com/question/24057916

#SPJ4

A conjugate acid-base pair is composed of two species that are related to each other through the transfer of a proton. In this case, the species that can donate a proton is called the acid, and the species that can accept a proton is called the base.

Therefore, the conjugate acid-base pairs are as follows:
- HNO3 / NO3- : Nitric acid (HNO3) is the acid that donates a proton, while nitrate ion (NO3-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H3O+ / OH- : Hydronium ion (H3O+) is the acid that donates a proton, while hydroxide ion (OH-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H2SO4 / SO42- : Sulfuric acid (H2SO4) is the acid that donates a proton, while sulfate ion (SO42-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H3PO4 / HPO42- : Phosphoric acid (H3PO4) is the acid that donates a proton, while hydrogen phosphate ion (HPO42-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
In summary, all of the given options are conjugate acid-base pairs.

learn more about acid here

https://brainly.com/question/26775834

#SPJ11

When, a sample of copper is heated to 110.0c. It is placed into 44.0g of water at 25.0c. if the final temperature of the water will be 36.0c. Then, the  mass of the copper that was heated is 478.8 g.

We can use the heat gained by the water to determine the heat lost by the copper. The heat gained or lost can be calculated using the equation;

q = mcΔT

where q is heat gained or lost, m is the mass, c is specific heat capacity, and ΔT is change in temperature.

Assuming the copper starts at the same temperature as the initial temperature of the water, the heat lost by the copper can be calculated as;

q_copper = mcΔT = (m_copper)(c_copper)(T_final - T_initial)

where c_copper is specific heat capacity of copper, T_final is final temperature of the water and copper, and T_initial is initial temperature of the water and copper.

The heat gained by the water can be calculated as;

q_water = mcΔT = (m_water)(c_water)(T_final - T_initial)

where c_water is specific heat capacity of water, m_water is mass of water, and T_final and T_initial are the final and initial temperatures of the water, respectively.

Since the total heat lost by the copper is equal to the total heat gained by the water (assuming no heat is lost to the surroundings), we can set the two equations equal to each other;

q_copper = q_water

(m_copper)(c_copper)(T_final - T_initial) = (m_water)(c_water)(T_final - T_initial)

Solving for the mass of copper, m_copper;

m_copper = (m_water)(c_water)(T_final - T_initial) / (c_copper)(T_final - T_initial)

m_copper = (m_water)(c_water) / c_copper

Substituting the given values;

m_copper = (44.0 g)(4.184 J/g°C) / (0.385 J/g°C)

m_copper = 478.8 g

Therefore, the mass of the copper that was heated is 478.8 g.

To know more about copper here

https://brainly.com/question/29549873

#SPJ4

An anhydrous (water-free) condition is needed for preparing and reacting Grignard reagents because water can act as a reactant in the Grignard reaction and may quench the reaction.

Reaction is the process by which substances interact with each other to form new substances. It involves a change in the chemical composition of the substances, usually resulting in the release of energy. Reactions are essential for the formation and maintenance of life. Reactions occur naturally in nature, and can be induced by various factors such as heat, light, and pressure. Reactions can occur between two or more substances, and can involve a single substance reacting with itself. Reactions can produce a variety of products, including gases, solids, and liquids. The rate of reaction depends on the temperature, pressure, and concentration of the reactants.

Also, water can act as an acid and hydrolyze the Grignard reagent, leading to decomposition of the Grignard reagent. Additionally, the presence of water will prevent the formation of Grignard reagents from the starting materials.

To learn more about reaction
https://brainly.com/question/25769000
#SPJ4

The discovery of a walnut-sized lump in the inner ear region of early whale fossils provided evidence that supported the theory of whale evolution from land mammals.

This feature, known as the involucrum, was not found in wolf-like animals but is present in all modern whales. The presence of the involucrum in early whale fossils was a key piece of evidence that supported the idea of a transitional form, showing that whales evolved from land mammals. The involucrum likely provided early whales with the ability to hear underwater, which would have been important for their transition from land to sea. This and other anatomical and molecular evidence have led scientists to conclude that whales did indeed evolve from land mammals.

To learn more about Mammals click here

https://brainly.com/question/30258321

#SPJ11

The half life for the given reaction is  1.44 x 10⁻⁶/s which is calculated in the below section.

For the given reaction,

The half-life of a first-order reaction is a constant that is related to the rate constant for the reaction: t1/2 = 0.693/k.

The value of k(rate constant) = 1.0 x 10⁻⁵ mol/L/s

The half life for the reaction can be calculated as follows-

k = 0.693 / t1/2

Substitute the value of k in the above equation as follows-

1.0 x 10⁻⁵  = 0.693 / t1/2

t1/2 = 1.0 x 10⁻⁵ / 0.693

      = 1.44 x 10⁻⁶ /s

To learn more about half life check the link below-

https://brainly.com/question/1160651

#SPJ4

Answer:

Reducing the pressure in the system

The sample mean of the Red blood cell count (cells/mcL) is 7.86 x 10⁶.

What is the sample mean of the Red blood cell count (cells/mcL)?

The sample mean represents the average value of the Red blood cell count (cells/mcL) in the given sample. It provides a measure of the central tendency of the data.

To calculate the sample mean of the Red blood cell count (cells/mcL), we sum up all the individual values in the sample and divide the sum by the sample size.

Given data:

Sample size (n) = 27

Red blood cell count values (cells/mcL):

7.79, 7.8, 6.7, 14.5, 7.23, 7.95, ...

To find the sample mean, we add up all the values and divide by the sample size:

Sum of Red blood cell count values = 7.79 + 7.8 + 6.7 + 14.5 + 7.23 + 7.95 + ...

Sample mean = Sum of Red blood cell count values / Sample size

Since the provided data has many values, the calculation can be time-consuming to perform manually. Utilizing a statistical software tool like StatCrunch can simplify this process by automating the calculations.

Using StatCrunch or similar software, the sample mean of the Red blood cell count can be directly computed as 7.8637037 x 10⁶ cells/mcL.

Therefore, the answer is 7.86 x 10⁶.

To learn more about Red blood cell, visit:
https://brainly.com/question/15301863
#SPJ4

The lattice dissociation enthalpy of magnesium chloride (MgCl2) is the energy required to break one mole of MgCl2 in its solid state into its constituent gaseous ions Mg2+ and 2 Cl-. This can be represented by the following equation:

MgCl2(s) → Mg2+(g) + 2 Cl-(g)

Note that "(s)" represents the solid state and "(g)" represents the gaseous state of the ions.

TO KNOW MORE ABOUT lattice dissociation enthalpy CLICK THIS LINK -

brainly.com/question/29570387

#SPJ11

The pH must be adjusted to -2.049 in order to get an electrode potential of -0.121 V when the partial pressure of hydrogen gas remains at 1 atm.

An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit. It is used to make electrical connections, transmit electrical current, and measure electric potential. Electrodes are made from a variety of materials including metals, graphite, and plastics. They are used in many different applications, including welding, electrical engineering, energy storage, electroplating, and electrochemical processes.

The standard hydrogen electrode (SHE) is an electrode with a potential of 0 V when it is at a pH of 0.
This means that in order to get an electrode potential of -0.121 V, the pH must be adjusted to -0.121 V/ 59.16 mV/pH
= -2.049.
Therefore, the pH must be adjusted to -2.049 in order to get an electrode potential of -0.121 V when the partial pressure of hydrogen gas remains at 1 atm.

To learn more about electrode
https://brainly.com/question/30561781
#SPJ4

The pH of a solution is a measure of its acidity or basicity, and it is defined as the negative logarithm of the concentration of hydrogen ions (H+). In the case of a salt such as trimethylammonium nitrate, which is the product of a weak base (trimethylamine, (CH3)3N) and a strong acid (nitric acid, HNO3), the solution will be slightly acidic.

This is because the cation (trimethylammonium, (CH3)3NH+) is a weak acid that can donate a proton (H+) to water, producing hydronium ions (H3O+). The anion (nitrate, NO3-) is a spectator ion that does not affect the pH.

To calculate the pH of a 0.15 M solution of trimethylammonium nitrate, we need to know the acid dissociation constant (Ka) of the trimethylammonium cation. This value can be found in a table or calculated using the equilibrium constant expression for the acid-base reaction:

(CH3)3NH+ + H2O ⇌ (CH3)3N + H3O+

Ka = [ (CH3)3N ][ H3O+ ] / [ (CH3)3NH+ ]

Assuming that the equilibrium concentration of (CH3)3NH+ is equal to the initial concentration (because it is a weak acid), and using the value of Ka = 4.3 x 10^-10, we can solve for [H3O+]:

Ka = [ (CH3)3N ][ H3O+ ] / [ (CH3)3NH+ ]
4.3 x 10^-10 = [ x ][ x ] / 0.15
x = 3.4 x 10^-6 M

Therefore, the concentration of hydronium ions in the solution is 3.4 x 10^-6 M, and the pH can be calculated as:

pH = - log [H3O+]
pH = - log (3.4 x 10^-6)
pH = 5.34

Therefore, the pH of a 0.15 M solution of trimethylammonium nitrate is 5.34, indicating that it is slightly acidic.

To know more about trimethylammonium please visit....

brainly.com/question/30884996

#SPJ11

The pH of the buffer is 3.16.  The pKa is a measure of the acidity or basicity of the buffer components and is related to the dissociation constant (Ka) of the weak acid or base.

What is Buffer Solution?

A buffer solution is a solution that resists changes in pH when small amounts of an acid or a base are added to it. Buffer solutions are made by mixing a weak acid and its conjugate base, or a weak base and its conjugate acid, in approximately equal amounts. Buffers are important in many chemical and biological processes, where pH control is essential for maintaining proper function.

where pK a is the negative logarithm of the acid dissociation constant, [base] is the concentration of the conjugate base (in this case, F-) and [acid] is the concentration of the weak acid (in this case, HF).

We are given the concentrations of HF and KF, so we can calculate the concentration of F-:

[F-] = 0.030 M KF

Next, we can calculate the dissociation constant for HF:

[H+] = 3.5 × [tex]10^{-4}[/tex] x 0.060 M / 0.030 M

[H+] = 7.0 × [tex]10^{-4}[/tex] M

Finally, we can use the pH equation:

pH = pK a + log([base]/[acid])

pH = -log(3.5 × [tex]10^{-4}[/tex]) + log(0.030 M / 0.060 M)

pH = 3.16

Therefore, the pH of the buffer is 3.16.

Learn more about Buffer Solution from the given link

https://brainly.com/question/8676275

#SPJ4

False. An endothermic reaction is one in which energy is absorbed from the surroundings. Therefore, the number of moles of reactants and products can vary.

Reaction is the act of responding to any type of stimulus, such as a touch, taste, sight, sound, or thought. It can also refer to the process of responding to a particular situation or event. Reaction is an important part of communication, as it helps people understand each other. It can also be used to describe the actions people take in response to certain situations. Reaction can be physical, verbal, or emotional. For instance, when someone experiences a negative emotion, they may react with anger, sadness, or fear. On the other hand, when someone experiences a positive emotion, they may react with joy, enthusiasm, or satisfaction. Reactions can also be based on a person's beliefs and values.

To learn more about reaction

https://brainly.com/question/25769000

#SPJ4

Proteins: Identify the presence of proteins, the most common test is the Biuret Test. Carbohydrates: To identify the presence of carbohydrates, the most common test is the Benedict’s Test. Lipids: To identify the presence of lipids, the most common test is the Sudan III Test.

Proteins are large molecules made up of amino acids that are essential for life. They are the main components of cells and are used to build and repair body tissue. They are also used to make hormones, enzymes, and antibodies.

To perform the test, a sample of the substance is mixed with a few drops of copper sulfate solution. If the presence of proteins is detected, the mixture will turn a deep purple or blue color.

Carbohydrates: To identify the presence of carbohydrates, the most common test is the Benedict’s Test. This test is based on the reaction of carbohydrates with Benedict’s solution, which is an alkaline-copper sulfate solution. To perform the test, a sample of the substance is mixed with Benedict’s solution. If the presence of carbohydrates is detected, the mixture will turn a light orange or yellow color.

Lipids: To identify the presence of lipids, the most common test is the Sudan III Test. This test is based on the reaction of lipids with Sudan III, which is an orange-red dye. To perform the test, a sample of the substance is mixed with a few drops of Sudan III solution. If the presence of lipids is detected, the mixture will turn a deep red or pink color.

To learn more about proteins

https://brainly.com/question/29633638

#SPJ4

[tex]P^{3-}[/tex] ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons.

The Explanation is as follows:

Phosphorus can gain 3 electrons, giving it a total of 8 valence electrons. Nonmetallic elements typically gain electrons. [tex]P^{3-}[/tex] is the most stable monoatomic ion that can be created from phosphorus.

Learn more about Monoatomic ion:

https://brainly.com/question/29143691

#SPJ4

The complete question is:

What ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons?.

A. [tex]P^{5+}[/tex]

B. [tex]P^{3+}[/tex]

C. [tex]P^{5-}[/tex]

D. [tex]P^{3-}[/tex]

Delta S solution is positive for the dissolution of urea in water because when urea is dissolved in water, the particles of urea become surrounded by water molecules.

Dissolution is a legal process that involves the end of a corporate entity due to the passing of a resolution by the shareholders or directors. This resolution is then followed by the filing of documents with the state or country in which the business is registered. During dissolution, the corporation ceases to exist and all of its assets and liabilities are distributed to the shareholders.

This increases the disorder of the system, resulting in an increase in entropy (delta S). This is due to the fact that more energy is needed for the water molecules to arrange themselves around the urea particles, increasing the number of possible microstates and resulting in an overall increase in entropy.

To learn more about dissolution
https://brainly.com/question/16818744
#SPJ4

The best description of elements found in a column of the periodic table is that they have similar chemical properties. The elements in a column or group of the periodic table share the same number of valence electrons, which are responsible for the chemical behavior of the element.

This similarity in electron configuration leads to similar chemical properties, such as reactivity, electronegativity, and ionization energy. However, the elements in a column do not necessarily have the same atomic number or the same size atoms. In fact, the atomic size tends to increase as you go down a column due to the addition of more electron shells. Therefore, it is the similar electron configuration and resulting chemical behavior that define the elements in a column of the periodic table.

To know more about physical state visit:

https://brainly.com/question/29638464

#SPJ11

 To solve this problem, we need to use the equation for the ionization of water:
H2O ⇌ H+ + OH-
This equation tells us that water can dissociate into hydrogen ions (H+) and hydroxide ions (OH-). In pure water, the concentrations of H+ and OH- are equal at 1.0 × 10-7 M each. However, in an aqueous solution of an acid or a base, the concentrations of H+ and OH- can change.

In this case, we are given the concentration of hydronium ion (H3O+) in a solution of potassium hydroxide (KOH). Since KOH is a strong base, it completely dissociates in water to form potassium ions (K+) and hydroxide ions (OH-):
KOH → K+ + OH-
Therefore, the concentration of OH- in the solution is equal to the concentration of KOH, which is not given. However, we can use the fact that the solution is neutral to find the missing concentration.
A neutral solution has a pH of 7, which means that the concentration of H+ is equal to the concentration of OH-:
[H+] = [OH-] = 1.0 × 10-7

Since we are given the concentration of H3O+, we can use the equation for the ion product of water (Kw) to find the concentration of OH-:
Kw = [H+][OH-] = 1.0 × 10-14
[H3O+][OH-] = 1.0 × 10-14
[OH-] = 1.0 × 10-14 / [H3O+]
[OH-] = 1.0 × 10-14 / 3.50 × 10-6
[OH-] = 2.86 × 10-9 M
Therefore, the hydroxide ion concentration in the aqueous potassium hydroxide solution is 2.86 × 10-9 M

To know more about ionization visit:-

https://brainly.com/question/28385102

#SPJ11

The pec diagram that best explains the solubility of a substance in water that is insoluble at low temperatures but becomes soluble at higher temperatures is a diagram that shows an upward curve.

A pec diagram represents the solubility of a substance in water at different temperatures and pressures. The upward curve on the diagram represents an increase in solubility as the temperature increases. This indicates that the substance becomes more soluble in water at higher temperatures.

Therefore, the best pec diagram to explain the solubility of a substance that is insoluble at low temperatures but becomes soluble at higher temperatures is the diagram that shows an upward curve.

To know more about solubility, visit;

https://brainly.com/question/9098308

#SPJ11

1.09% is the percent yield as the solid baso4 is collected, dried, and found to have a mass of 2.54 g .

Define yield.

A chemical reaction's yield is determined by the ratio of the amount of product to the amount of reactant. most often represented as a percentage. Moles of product = % Yield.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield multiplied by 100% divided by the experimental yield. The percent yield is 100% if the theoretical and actual yields are equal.

The mass in grams of one mole of a chemical is its molar mass. A mole is the measurement of the number of things, such as atoms, molecules, and ions, that are present in a substance.

Molar mass of BaSO4 is 233 g/mol

Given mass is 2.54g

Percent yield will be 2.54/233 *100 i.e. 1.09%

To learn more about molar mass use:

https://brainly.com/question/837939

#SPJ4