White ___ undergo photosynthesis

the answer i think is 3

Explanation:

dehydration

Explanation:

After completion of surgery to correct syndactyly, the cortex stops representing the fingers."

The last option is correct

The syndactyly is described as a condition where fingers are fused together.

After the sugary, the fingers separate in about 6 months, which refers to the physical separation of the fingers. However, the cortical representation of the fingers in the brain changes much more rapidly.

In the brain, the primary somatosensory cortex is responsible for processing tactile information from different body parts, including the fingers.

The cerebral representation of the fingers may be joined or overlapped prior to surgery when they are united. However, as the fingers physically separate following the procedure, the cerebral representation of the fingers starts to shift.

Learn more about syndactyly at:

https://brainly.com/question/32799167

#SPJ1

The statement that best describes what Rutherford concluded from the motion of the particles is option c. Some particles traveled through empty spaces between atoms and some particles were deflected by small areas of high-density positive charge in atoms.

Rutherford's experiment, known as the gold foil experiment, led to the discovery of the atomic nucleus. He observed that most of the alpha particles passed straight through the gold foil without significant deflection, suggesting that atoms have mostly empty space. However, some alpha particles were deflected at different angles, indicating the presence of a small, dense, and positively charged region within the atom.

Based on these observations, Rutherford concluded that atoms have a central, positively charged nucleus that contains most of the atom's mass and positive charge. The electrons, which are negatively charged, were found to be orbiting around the nucleus in the empty space surrounding it.

Thus, some particles (alpha particles) traveled through the empty spaces between atoms (mostly passing through the foil), while some particles were deflected by the small areas of high-density positive charge in atoms (encountering the nucleus). Therefore, the correct answer is option c.

know more about Rutherford's experiment here:

https://brainly.com/question/2289254

#SPJ8

The Question was Incomplete, Find the full content below :

Rutherford tracked the motion of tiny, positively charged particles shot through a thin sheet of gold foil. Some particles traveled in a straight line and some were deflected at different angles.

Which statement best describes what Rutherford concluded from the motion of the particles?

a. Some particles traveled through empty spaces between atoms and some particles were deflected by electrons.

b. Some particles traveled through empty parts of the atom and some particles were deflected by electrons.

c. Some particles traveled through empty spaces between atoms and some particles were deflected by small areas of high-density positive charge in atoms.

d. Some particles traveled through empty parts of the atom and some particles were deflected by small areas of high-density positive charge in atoms.

The top layer of the ocean is the warmest because it directly interacts with sunlight and absorbs most of its heat.

The top layer of the ocean, known as the surface or mixed layer, is the warmest due to several factors:

Overall, the combination of direct sunlight, absorption, mixing, and insulation leads to the top layer of the ocean being the warmest.

For more such question on  sunlight

https://brainly.com/question/1603783

#SPJ8

Electromagnet A is likely to have a stronger magnetic field in (B) because it has more electric current from two batteries.

This is because the strength of an electromagnet is directly proportional to the current flowing through its wire and inversely proportional to the distance between the wire and the object being magnetized. The strength of an electromagnet depends on the amount of current flowing through its wire.

The more current there is, the stronger the magnetic field. Therefore, if electromagnet A has more electric current from two batteries compared to electromagnet B which has electric current from one battery, then it is more likely to have a stronger magnetic field. Moreover, the magnetic field strength also depends on the distance between the wire and the object being magnetized.

The closer the wire is to the object, the stronger the magnetic field will be. However, in this case, the two electromagnets are using the same size nail, which means the distance between the wire and the nail is the same for both electromagnets. Therefore, the difference in magnetic field strength is likely to be due to the difference in electric current flowing through their wires.

In summary, Electromagnet A is likely to have a stronger magnetic field than Electromagnet B because it has more electric current from two batteries. The correct answer is B.

Know more about Electromagnet  here :

brainly.com/question/12555869

#SPJ8

Answer:

Explanation:

A hypothesis is like a guess you make before you do any research, and a theory is like a conclusion you draw after you see the data. A hypothesis can be right or wrong, but a theory is more likely to be right because it has evidence to back it up. A hypothesis can change if you find new data that contradicts it, but a theory is stable and consistent. For instance, the Cell Theory is a theory that tells us how living things work based on what we see under a microscope and in a lab, while a hypothesis might be an idea about why some animals have different kinds of skin, like fur or scales.

Sometimes, something can be both a theory and a hypothesis, depending on how much evidence it has and how many things it can explain. A theory is a hypothesis that has passed many tests and can explain a lot of things, and a hypothesis is a theory that has not done that yet. For example, the string theory is a hypothesis that tries to tell us what everything is made of, but we don't have any data to prove it. The cell theory, however, is a theory that tells us what living things are made of, and we have lots of data to prove it.

Answer:

Answer:

can be tested by many independent researchers - both

based on observations of natural phenomena - both

makes predictions about future events - both

a tentative statement used to guide scientific investigations - hypothesis

a well-established, highly reliable explanation - theory

Explanation:

Answer:

The mass of the products and the mass of the reactants are equal.

Explanation:

According to the Law of Conservation of Matter, matter cannot be created or destroyed in a chemical reaction. In the given chemical reaction of hydrogen and oxygen combining to form water, the reactants are hydrogen and oxygen, and the product is water. COM states that the total mass of the hydrogen and oxygen reactants must be equal to the total mass of the water product.

2H2+O2 -> 2H2O

Answer:

Based on the information provided, the most plausible explanation would be "Tobias drank from a water fountain that was contaminated." Mononucleosis is a contagious disease caused by the Epstein-Barr virus (EBV), which is most commonly spread through direct contact, such as sharing drinks or food, or through saliva. It's not related to exercise habits, gender, or inherited genes.

Explanation:

Mononucleosis, often called "mono," is an infectious illness caused most commonly by the Epstein-Barr virus (EBV), a type of herpes virus. Other viruses can also cause mononucleosis.

Now, let's break down each of the options you provided:

1. "Tobias never exercised and was more susceptible to the virus." While regular exercise can boost your immune system and potentially make you less susceptible to infections in general, not exercising doesn't specifically make you more susceptible to mononucleosis. The primary way to contract the virus is through direct contact with saliva from an infected person.

2. "As a male, Tobias has a better chance of getting mononucleosis." Mononucleosis affects both males and females, and there's no evidence to suggest that one gender is more susceptible to the virus than the other.

3. "Tobias inherited the gene from his parents." Mononucleosis is not a genetic disease. It's an infectious disease, which means it's caused by a virus, not by a gene passed down from parents to their children.

4. "Tobias drank from a water fountain that was contaminated." This is the most likely scenario. The Epstein-Barr virus, which causes mononucleosis, is spread through body fluids, usually saliva. If an infected person drank from a water fountain and left some saliva on it, and then Tobias drank from the same fountain, he could potentially contract the virus.

So, based on the information we have about how mononucleosis is spread, the most likely explanation for how Tobias contracted the disease is through direct contact with the virus, such as drinking from a contaminated water fountain.

Answer:

D. Tobias drank from a water fountain that was contaminated.

Explanation:

As stated in the question, mononucleosis is caused by a contagious virus that is transferred through direct contact.

A. Tobias never exercised and was more susceptible to the virus is not the answer. While he may have been more susceptible to the virus, the virus is contagious through touch, so not exercising would not directly give him the virus.

B. As a male, Tobias has a better chance of getting mononucleosis is also not the answer. Again, no direct contact is involved here, so he did not get the virus directly from being a male. (and being a male probably does not increase the chances at all).

C. Tobias inherited the gene from his parents is incorrect as well. The virus is contagious, not inherited. This means that he could not have directly inherited the virus from his parents.

This means that D. Tobias drank from a water fountain that was contaminated is the correct answer. Direct contact is involved here. Since the water fountain contains the virus, and Tobias had contact with the water fountain, he most likely contracted mononucleosis from drinking from the water fountain.

A physician may perform a Gram stain on bacteria from a patient's infection to obtain preliminary information about the bacterial cell wall structure, which can aid in selecting appropriate antibiotics for treatment.

A physician may perform a Gram stain on bacteria taken from a patient's infection for several reasons, despite the fact that bacteria cannot be definitively identified based on a Gram stain alone.

Therefore, while a Gram stain alone cannot definitively identify bacteria, it plays a valuable role in providing preliminary information and guiding the initial management of bacterial infections.

For more such question on  bacteria

https://brainly.com/question/8695285

#SPJ8

Gametes are haploid cell that result from the meitoc division of a germ cell. In the exposed example, the correct option is A. Gametes will have either the A or a allele.

Gametes are haploid cells (n) that results from meiotic cell division. They carry half the number of chromosomes of the diploid parental cell (germ cell).

Gamete formation involves the random and independent segregation of the alleles during meiosis, which results in different chromosomal combinations in the daughter cells.

In the exposed example, there is a parental cell carrying a diallelic gene Aa. This cell divides, and each of the alleles migrate to one of the resulting gametes.

Parental cell) Aa

Gametes) A and a

The correct option is A. Gametes will have either the A or a allele.

You can learn more about gametes at

https://brainly.com/question/972178

#SPJ1

Caesalpinia pulcherrima is a species of flowering plant in the pea family Fabaceae, native to the tropics and subtropics of the Americas.

1. The Pride of Barbados flower which is scientifically known as Caesalpinia pulcherrima, is described as  a vibrant and ornamental flowering plant native to the tropical regions of the Americas, including Barbados.

2. The Pride of Barbados flower exhibits axile placentation.

Axile placentation refers to the arrangement of ovules within the ovary of a flower.

3. The Pride of Barbados flower has a superior ovary which  is positioned above the attachment point of other floral parts, such as the sepals, petals, and stamens. In the case of the Pride of Barbados flower, the ovary is located at the base of the floral structure, below the colorful petals and stamens.

Learn more about Axile placentation at:

https://brainly.in/question/13504070

#SPJ1

#complete question:

Main focus : Pride of Barbados flower.

Question :

1. Give a brief summary containing information about the Pride of Barbados flower ( e.g it's scientific name , where its found , e.t.c.)

2. What type of Placentation is found in Pride of Barbados flower ?

3. What type of Ovary is found in Pride of Barbados flower ?

OB. Species B will have a wider range of phenotypes. This is because having more alleles controlling leaf color in species B provides a greater potential for genetic variation, resulting in a wider range of observable traits or phenotypes compared to species A. So,  option B is the right choice.

The difference between species A and species B lies in the number of alleles controlling leaf color. Alleles are different forms of a gene that determine specific traits.

Based on this information, the correct answer is OB. Species B will have a wider range of phenotypes. The greater number of alleles in species B allows for more diverse expressions of leaf color, resulting in a broader spectrum of observable traits.

The right answer is option B. Species B will have a wider range of phenotypes.

For more such question on phenotypes

https://brainly.com/question/22117

#SPJ8

The various functions of marketing include product planning and development, pricing, promotion, distribution, selling, market research, and customer service.

1. Product Planning and Development: This function involves identifying customer needs and wants and developing products or services that satisfy those needs. It includes activities such as product design, packaging, branding, and innovation.

2. Pricing: Setting the right price for a product or service is crucial for its success. This function involves determining the optimal price that balances profitability with customer value and demand. Factors considered include production costs, competition, and customer perception of value.

3. Promotion: Promotional activities aim to communicate the value and benefits of a product or service to the target market. It includes advertising, public relations, sales promotions, and personal selling. The goal is to create awareness, generate interest, and stimulate demand.

4. Distribution: This function involves determining the most efficient and effective ways to make products available to customers. It includes decisions about channels of distribution, logistics, warehousing, and inventory management. The goal is to ensure the right products are available in the right place at the right time.

5. Selling: Selling is the process of persuading and influencing customers to purchase a product or service. It involves personal interactions, negotiations, and building relationships with customers. Sales techniques and strategies are employed to meet sales targets and maximize revenue.

6. Market Research: Market research helps businesses understand their target market, competition, and consumer behavior. It involves gathering and analyzing data on market trends, customer preferences, and buying habits. This information helps in making informed decisions and developing effective marketing strategies.

7. Customer Service: Providing excellent customer service is vital for customer satisfaction and loyalty. This function involves addressing customer inquiries, resolving complaints, and ensuring a positive post-purchase experience. It aims to build long-term relationships and enhance the overall customer experience.

In the context of selling a product, let's consider a fitness tracker as an example.

1. Product Planning and Development: Identify customer needs for fitness tracking, design a tracker with features like heart rate monitoring, step counting, and sleep tracking.

2. Pricing: Determine a competitive price by considering production costs, pricing of similar products, and perceived value by customers.

3. Promotion: Advertise the fitness tracker through various channels, such as online ads, social media campaigns, and collaborations with fitness influencers. Offer discounts or special promotions to generate interest.

4. Distribution: Partner with retail stores, online marketplaces, and fitness centers to ensure the availability of the fitness tracker to target customers.

5. Selling: Train sales representatives to educate potential customers about the benefits of the fitness tracker and address their concerns. Offer personalized recommendations based on individual fitness goals.

6. Market Research: Conduct surveys and analyze customer feedback to understand preferences, improve product features, and identify opportunities for expansion.

7. Customer Service: Provide a responsive customer support system to address inquiries, troubleshoot issues, and ensure customer satisfaction with the fitness tracker.

By incorporating these functions of marketing, a fitness tracker can be successfully launched, promoted, and sold in the market, meeting customer needs and generating revenue.

For more such questions on product, click on:

https://brainly.com/question/1966268

#SPJ8

O+

because lack antigen A,B, and AB

Answer:

Soil health, nitrogen fixation, and sunlight are three factors that affect plant growth.

Explanation:

Soil health: Healthy soil provides the necessary nutrients, water, and support for plants to grow. Nutrients are absorbed by plant roots, promoting growth, while proper soil structure ensures adequate water retention and drainage.

Nitrogen fixation: Certain bacteria or leguminous plants convert atmospheric nitrogen into a usable form for plants. This process provides plants with an abundant source of nitrogen, essential for growth, foliage development, and productivity.

Sunlight: Through photosynthesis, plants convert sunlight into energy (glucose) and oxygen, fueling growth and metabolic processes. Sunlight also influences the direction and orientation of plant growth, impacting overall plant health.

Earth's systems are interconnected, and what happens in one system can have an impact on the others like, if humans pollute the air, this can lead to climate change, which can then impact the water system.

Deforestation: Deforestation is the clearing of trees from an area of land. This can lead to soil erosion, which can pollute waterways and disrupt the water cycle. Deforestation can also impact the climate, as trees absorb carbon dioxide from the atmosphere.

Pollution: Pollution is the release of harmful substances into the environment. This can come from a variety of sources, including factories, cars, and power plants. Pollution can impact the air, water, and land, and can also harm human health.

Overfishing: Overfishing is the harvesting of fish at a rate that exceeds their ability to reproduce. This can lead to the depletion of fish populations, which can have a ripple effect on the entire food chain.

Climate change: Climate change is a long-term change in the Earth's climate. This can be caused by a number of factors, including human activities such as the burning of fossil fuels. Climate change can impact the Earth's systems in a variety of ways, including by causing more extreme weather events, rising sea levels, and changes in plant and animal life.

Find out more on earth's systems here: https://brainly.com/question/29035576

#SPJ1

Earth’s atmosphere helps to regulate its temperature. However, the addition of gases such as (1) A Carbon Dioxide causes more energy to radiate back toward Earth. As a result, the atmospheric temperature increases over time. If Earth had no atmosphere, it would radiate nearly as much energy as it receives from the Sun. This implies that the temperatures on Earth would be(2) B Lower than Earth’s current temperature.

The addition of gases such as (a) Carbon Dioxide causes more energy to radiate back toward Earth. These gases are known as greenhouse gases because they absorb and re-emit infrared radiation, trapping heat in the atmosphere. Carbon Dioxide, in particular, is a significant greenhouse gas contributing to the greenhouse effect and global warming.

If Earth had no atmosphere, it would lose energy primarily through radiation and would radiate nearly as much energy as it receives from the Sun. Without the greenhouse effect provided by the atmosphere and greenhouse gases, the temperatures on Earth would be (b) Lower Than Earth's current temperature. The greenhouse effect helps regulate the temperature by trapping some of the outgoing heat, preventing it from escaping into space. This results in a warmer overall climate compared to what would be expected without an atmosphere.

Therefore, the presence of greenhouse gases, including Carbon Dioxide, in Earth's atmosphere leads to an increased atmospheric temperature over time, while the absence of an atmosphere would cause the temperatures to be lower than the current temperature due to the lack of greenhouse effect.

Know more about Carbon Dioxide here:

https://brainly.com/question/25385913

#SPJ8

The question was incomplete. find the full content below:

Earth’s atmosphere helps to regulate its temperature. However, the addition of gases such as (1)__ causes more energy to radiate back toward Earth. As a result, the atmospheric temperature increases over time. If Earth had no atmosphere, it would radiate nearly as much energy as it receives from the Sun. This implies that the temperatures on Earth would be(2)__ Earth’s current temperature.

1)

a. Carbon Dioxide

b. Oxygen

c. Nitrogen

2)

a. Higher Than

b. Lower Than

c. Equal To

Answer:

Roots have specialized cells called root hair cells that are responsible for absorbing water and mineral ions like nitrates from the soil. These cells have long thin projections that stick out into the soil.

For plants to take up mineral ions, ions are moved into root hairs, where they are in a higher concentration than in the dilute solutions in the soil. This movement of ions from a low concentration in the soil to a higher concentration in the plant is achieved through a process called active transport. Active transport is a process that is required to move molecules against a concentration gradient. This means that substances are moved from a low concentration to a high concentration, which is the opposite of what would happen naturally. The process requires energy.

In the case of root hair cells absorbing nitrate ions from soils with low nitrate concentrations, active transport allows the plant to take in the ions it needs from the soil around it. The energy required for this process is produced by respiration.

Answer:

ok, here is your answer

Explanation:

AI-generated answer

The triple beam balance is used to measure mass, which is the amount of matter in an object. Therefore, any item that needs to be measured in terms of its mass can be measured using the triple beam balance in the Gizmo. Some examples of items that can be measured using a triple beam balance are:

- Solids such as rocks, metals, and minerals

- Liquids such as water, oil, and alcohol

- Powders such as flour, sugar, and salt

To measure an item on the triple beam balance in the Gizmo, place the item on the pan and adjust the riders on the beams until the pointer is at zero. Then, move the riders along the beams to find the mass of the item. Make sure to read the mass from left to right, starting with the largest beam and moving to the smallest beam.

In summary, the most appropriate item to measure on the triple beam balance in the Gizmo is any item that needs to be measured in terms of its mass.

Answer:

B.Thoracic

Explanation:

If you ever feel like you have too much on your back, you might be right. The thoracic region of the spine has 12 vertebrae, which is more than any other region of the spine. That's a lot of bones to carry around! The cervical region has seven vertebrae, the lumbar region has five vertebrae, the sacral region has five fused vertebrae, and the coccygeal region has three to four fused vertebrae. The thoracic vertebrae are in the upper back and are attached to the ribs. So next time you have a backache, just remember: you have a lot of backbone!

So the real length of the root hair, X, is 5X micrometers (μm).

We have :

factor = 200

Length of the root hair in the image = X

The magnification factor is described as the ratio of the image size to the actual size. In this case, the image size is X and the actual size is X divided by the magnification factor.

Actual size = Image size / Magnification factor

Actual size (in μm) = (Image size / Magnification factor) * 1000

Actual size (in μm) = (X / 200) * 1000

Actual size (in μm) = 5X

Learn more about magnification factor at:

https://brainly.com/question/29306986

#SPJ1

Answer:

here u go

Explanation:

The natural process that causes the depletion of the ozone layer is the breakdown of ozone molecules by ultraviolet radiation from the sun.

The allele for round shape in this case would be lowercase 'h' (h), as it is recessive to the dominant oval shape allele (H).

For more such questions on Allele:

https://brainly.com/question/23516288

#SPJ8

1. Make observations - option E. Plants grow well under sunlight or a lightbulb with a hot, white light.

2. Ask a question - option C. Do plants grow as well under a different color of light?

3. Test the hypothesis - option A. Put one plant under a white lightbulb, and place the other plant under a red lightbulb. Measure the growth of the two plants.

4. Analyze the results, and make a conclusion - option D. Determine whether the plant grown under the white lightbulb or the plant grown under the red lightbulb grew better.

5. Test or modify - option B. If you observe no change, repeat the experiment with different colors of lightbulbs. If there is a change, repeat the experiment for one or two more trials to ensure that the color of the lightbulb contributes to the change.

To design an experiment that investigates how plants respond to changes in their environment, we can follow the scientific method. The goal is to understand if different colors of light affect plant growth.

Here's an explanation of each step:

1. Make observations: Start by observing that plants grow well under sunlight or a lightbulb with a hot, white light. This observation forms the basis for the experiment.

2. Ask a question: Formulate a question based on the observation, such as "Do plants grow as well under a different color of light?"

3. Test the hypothesis: Put one plant under a white lightbulb and place the other plant under a red lightbulb. Measure the growth of the two plants over a specified period, noting any differences in their growth patterns.

4. Analyze the results and make a conclusion: Determine whether the plant grown under the white lightbulb or the plant grown under the red lightbulb grew better. Compare the growth rates, height, number of leaves, or any other relevant measurements to draw conclusions.

5. Test or modify: If you observe no significant change between the white and red light conditions, repeat the experiment with different colors of lightbulbs. If there is a change, repeat the experiment for one or two more trials to ensure that the color of the lightbulb contributes to the observed differences in plant growth.

The Question was Incomplete, Find the full content below :

Your teacher asks you to design an experiment that shows how plants respond to changes in their environment. You have two identical plants to do your experiment, and you may add any other equipment of your choosing. Using the scientific method, design an experiment that meets your teacher’s criteria.

Match each step of the scientific method with a step of the experiment.

1. Make observations.

2. Ask a question.

3. Test the hypothesis.

4. Analyze the results, and make a conclusion.

5. Test or modify.

A. Put one plant under a white lightbulb, and

place the other plant under a red lightbulb.

Measure the growth of the two plants.

B. If you observe no change, repeat the experiment with different colors of lightbulbs. If there is a change, repeat the experiment for one or two more trials to ensure that the color of the lightbulb contributes to the change.

C. Do plants grow as well under a different

color of light?

D. Determine whether the plant grown under the white lightbulb or the plant grown under the red lightbulb grew better.

E. Plants grow well under sunlight or a lightbulb

with a hot, white light.

know more about plant growth here:

https://brainly.com/question/9323511

#SPJ8

Answer:

False.

Explanation:

Scientific advances have led to increased energy efficiency and waste reduction. Scientific research has led to the development of new technologies and methods that have improved energy efficiency and reduced waste in various industries and sectors. For example, the development of renewable energy technologies like wind and solar power has significantly reduced our reliance on fossil fuels and reduced greenhouse gas emissions. Additionally, advances in materials science and manufacturing processes have led to the creation of more efficient appliances, vehicles, and buildings that consume less energy and produce less waste. Overall, scientific advances have been crucial in helping us address pressing environmental issues and create a more sustainable future.

These are the description of the joint action, muscles and bones involved in the overhand throw

Wind-up

Hip flexion: The hip flexors (iliopsoas, rectus femoris, sartorius) contract to flex the hip joint, bringing the throwing arm up towards the chest.

Shoulder flexion: The shoulder flexors (anterior deltoid, pectoralis major) contract to flex the shoulder joint, bringing the arm up towards the chest.

Elbow flexion: The elbow flexors (biceps brachii, brachialis) contract to flex the elbow joint, bringing the forearm up towards the chest.

Stride

Hip extension: The hip extensors (gluteus maximus, hamstrings) contract to extend the hip joint, bringing the throwing leg forward.

Knee extension: The knee extensors (quadriceps femoris) contract to extend the knee joint, bringing the foot up towards the buttock.

Arm cocking

Shoulder external rotation: The shoulder external rotators (infraspinatus, teres minor, posterior deltoid) contract to externally rotate the shoulder joint, bringing the humerus into a cocked position.

Elbow extension: The elbow extensors (biceps brachii, brachialis) contract to extend the elbow joint, locking the arm in place.

Arm acceleration

Shoulder external rotation: The shoulder external rotators continue to contract to externally rotate the shoulder joint, generating power for the throw.

Elbow extension: The elbow extensors continue to contract to extend the elbow joint, generating power for the throw.

Wrist extension: The wrist extensors (extensor carpi radialis longus, extensor carpi radialis brevis) contract to extend the wrist joint, cocking the wrist back.

Arm deceleration

Shoulder internal rotation: The shoulder internal rotators (subscapularis, latissimus dorsi) contract to internally rotate the shoulder joint, slowing down the arm and preparing for the release.

Elbow flexion: The elbow flexors contract to flex the elbow joint, slowing down the arm and preparing for the release.

Wrist flexion: The wrist flexors (flexor carpi radialis, flexor carpi ulnaris) contract to flex the wrist joint, preparing for the release.

Follow-through

Shoulder internal rotation: The shoulder internal rotators continue to contract to internally rotate the shoulder joint, completing the throwing motion.

Elbow flexion: The elbow flexors continue to contract to flex the elbow joint, completing the throwing motion.

Wrist flexion: The wrist flexors continue to contract to flex the wrist joint, completing the throwing motion.

Bones involved:

Hip: Femur, ilium, ischium, pubis

Shoulder: Scapula, humerus

Elbow: Radius, ulna

Wrist: Carpals, metacarpals, phalanges

Agonist/Antagonist:

Agonist: The muscle that is responsible for the main movement of the joint.

Antagonist: The muscle that opposes the action of the agonist.

For example, in the arm cocking phase, the agonist is the shoulder external rotators and the antagonist is the shoulder internal rotators.

Find out more on joint action here: https://brainly.com/question/32278689

#SPJ1

Sophia is using a  option B. compound light microscope.

The clue lies in the fact that she is adjusting the mirror to observe a circle of light. Compound light microscopes use visible light to illuminate specimens and rely on a system of lenses to magnify the image. The mirror is an essential component of the microscope's illumination system.

In a compound light microscope, the mirror reflects light from an external source, such as a lamp or natural light, through the condenser and onto the specimen. The condenser focuses and concentrates the light, which then passes through the objective lens, specimen, and ocular lens, creating an enlarged and magnified image that can be observed by the user.

Electron microscopes, on the other hand, use a beam of electrons to visualize specimens rather than light. They have a significantly higher magnification and resolution compared to compound light microscopes, allowing for detailed examination of subcellular structures. Scanning electron microscopes (SEM) are a type of electron microscope that produce a three-dimensional image by scanning the specimen's surface with a focused beam of electrons. However, they do not rely on a mirror for illumination, making option C incorrect.

In summary, Sophia's use of a mirror to observe a circle of light suggests she is employing a compound light microscope. Therefore the correct option is B

Know more about compound light microscope here:

https://brainly.com/question/546408

#SPJ8

The Question was Incomplete, Find the full content below :

Sophia is observing slides under a microscope while adjusting its mirror so that a circle of light can be seen. Which type of microscope is she using?

a. electron microscope

b. compound light microscope

c. scanning electron microscope.

The two issues that will be most likely to occur if DNA were not stored in chromosomes is DNA will tangle and destroy.

DNA is also called deoxyribonucleic acid. It is a molecule that carries the genetic instructions used in the development, functioning, and reproduction of living organisms and many viruses.

DNA is a long, double-stranded helical structure that consists of nucleotides. Each nucleotide is composed of a sugar molecule a phosphate group and four nitrogenous bases. DNA is stored in chromosomes to prevent damage.

Learn more about DNA below: https://brainly.com/question/30993611

#SPJ1