Why C2H4 is non-polar?.

From the given data of chemical compounds, 5.32 grams of W and 2.66 grams of X are needed.

The following calculation must be done to determine how much W and X is needed to make the necessary amount of Z because it takes 8 grammes of a chemical compound called Z to make it, and Z is made from compounds W, X, and Y in the ratios of 2: 1: 3 and Y is itself made from W and X, and to make 6 grams of Y requires 4 grams of W and 2 grammes of X.

8/6 = 1.33

The resulting ratio is 2.66 : 2.33  :3:99.

3.99 = w

3.99 x 4/6 = 2.66

1.33 grams of X are equal to 2.66 grams of W.

2.66 x 2 = 5.32

1.33 x 2 = 2.66

5.32 grams of W and 2.66 grams of X are therefore needed.

To learn more about Chemical compounds from given link

https://brainly.com/question/15733908

#SPJ4

The main component in a cement slab in a house is typically Portland cement.

Key points:

Learn more about cement slabs here:

https://brainly.com/question/5842807

#SPJ4

Low pressures and high temperatures are the optimal conditions for gas behaviour. The ideal gas law [tex]PV = nRT[/tex] states that ideal gases must conform to this law.

It is only feasible if the gas is made up of several freely moving point particles that do not interact with each other and have a very small total volume. An ideal gas is one in which all collisions between atoms or molecules are completely elastic and in which there are no intermolecular attraction forces. It can be compared to a collection of perfectly hard spheres that collide but do not interact with one another in any other way. The molecules of perfect gases are not attracted to one another or repel one another.

Learn more about Ideal gas here:

https://brainly.com/question/27870704

#SPJ4

Answer:

4.949 g

Explanation:

One mole of any substance has 6.022 x [tex]10^{23}[/tex] atoms or particles.

Setting up ratio between moles and atoms:

Moles    :    Atoms

  1          :     6.022 x [tex]10^{23}[/tex]

  X         :     2.98 x [tex]10^{22}[/tex]

X = (2.98 x [tex]10^{22}[/tex])/(6.022 x [tex]10^{23}[/tex])

X = 0.049 moles

The molar mass of KNO3 is : 39 + 14 + ( 16 x 3 ) = 101 g/mol

Moles   :   Mass

  1          :    101

  0.049  :      X

X = 0.049 x 101

X = 4.949 g

A sealable bag holds 3.79 L of gas. To fill the bag, 0.157 moles of H2 gas are required.

The ideal gas equation is what we use to solve this problem. Additionally known as the general gas equation. This equation is used to describe a possible ideal gas. It has a few restrictions. In 1834, Benoit Paul Emile Clapeyron made the first mention of it. An empirical form is used to write the ideal gas law:

                                 PV = n R T

where-

           P = Pressure

           V = volume

          T = Temperature

           n =  The amount of substance

           R =  Ideal gas constant

Now we have the values of these terms as-

            P = 1 atm , V = 3.79L ,  T = 293 K

and     R = 0.0826 L/atm

For getting moles of hydrogen we can use the values of variables in ideal gas equation as -

                    P V = n R T

Now              (1 atm) × ( 3.79L ) = n ×  ( 0.0826 L/atm)  × ( 293K)

                                           n = (1 × 3.79) ÷ (0.0826 x 293)

                                            =  0.157 moles

So that the 0.157moles of H₂ gas are needed for fill the bag .

A hypothetical gas made up of molecules that adhere to a few rules is referred to as the ideal gas. The molecules of ideal gas do not attract or repel one another. An elastic collision with the container's walls or an elastic collision with the ideal gas molecules would be the only interaction between them.

Learn more about ideal gas law:

brainly.com/question/25290815

#SPJ1

From the given reaction, Oxygen serves as the limiting reagent. Methane remains after the reaction.

A reactant that is completely consumed at the end of a chemical reaction is known as the limiting reagent. Since the reaction cannot proceed without this reagent, the amount of product that can be produced is constrained.

Because its quantity restricts the number of products that can be generated, the reagent that is totally consumed or reacted is known as the limiting reagent.

CO₂ + 2H₂O ⇒ CH₄+ 2O₂

One mole of methane will totally react with two moles of oxygen to produce one mole of CO₂ and two moles of water, according to the stoichiometric equation given above.

64g of oxygen and 16g of methane will totally react in such case.

When methane is burned, the weight ratio of the reactions between CH₄ and O₂ is (16:64)=1:4.

Only 32 g of oxygen are provided in the question, though. Since we only have 32 when 64 is divided, oxygen will be the limiting reagent in this scenario.

Oxygen serves as the limiting reagent.

Methane is the extra reagent.

To learn more about limiting reagent from given link

https://brainly.com/question/23661051

#SPJ4

The empirical formula, P₂O₅, is the simplest whole number ratio to define the atoms that make up a species.

We calculate the ratio of phosphorus and oxygen atoms using the assumption that there are 100 g of unknown. There are 56.36 g of oxygen and 43.64 g of phosphorus in 100 g of material.

We divide via by each component's atomic mass:

O : 56.36 g / 16 g/mol = 3.52 mol oxygen
P : 43.64 g / 31 g/mol = 1.41 mol phosphorus

We want to get whole numbers, thus we divide through by the smallest molar quantity:

3.52. mol 1.41 mol of oxygen Equals 2.5

1 phosphorus is 1.41 mol of phosphorus.

A PO2.5 formula does us absolutely no benefit. The empirical formula is the simplest whole number ratio defining constituent atoms in a species, as we have shown, which is why. So, we only increase the ration by two to  give P₂O₅ as required.

To learn more about empirical formula from given link

https://brainly.com/question/1603500

#SPJ4

Answer:

Explanation:

the answer is B.

Answer:

1.2004 x [tex]10^{24}[/tex]

Explanation:

One mole of any substance has 6.022 x [tex]10^{23}[/tex] atoms.

Setting up ratio between moles and atoms:

Moles    :    Atoms

  1          :  6.022 x [tex]10^{23}[/tex]

  2         :    X

X = 2 x ( 6.022 x [tex]10^{23}[/tex] )

X = 1.2004 x [tex]10^{24}[/tex]

Answer: 30.3987 m/s

you might need to round that to the nearest hundredth or tenth

Explanation:

To solve this we must be knowing each and every concept related to speed  and its calculations. Therefore, 68 mi/hr  in m/s is 28.9m/s.

Speed may be defined as the distance traveled by an item in relation to the time that takes to travel that distance. In other words, it measures how rapidly an item travels but does not provide direction. The term "velocity" refers to the combination of direction and speed.

The average speed is the total distance traveled by the item in a particular time frame. A scalar quantity is average speed. The magnitude of a scalar quantity indicates that it has no direction.

Speed=Distance/Time

68 mi/hr  in m/s?

68 mi/3600=0.018m mi/s×1609

                   =28.9m/s

Therefore, 68 mi/hr  in m/s is 28.9m/s.

To know more about speed, here:

https://brainly.com/question/28238258

#SPJ1

The molecular formula and name of the acid would be [tex]C_4H_8O_2[/tex] and butanoic acid respectively.

The number of moles of the alkanoic acid is 0.5 mol and the mass of the acid is 44g. We can use this information to determine the molar mass of the acid as follows:

Molar mass = mass/mole = 44/0.5 = 88 g/mol

The alkanoic acid with a molar mass of 88 g/mol is butanoic acid.

[tex]C_4H_8O_2[/tex] = (12x4) + (1x8) + (16x2) = 88 g/mol

In other words, the name of the mono alkanoic acid is butanoic acid and the molecular formula is  [tex]C_4H_8O_2[/tex].

More on molecular formula of compounds can be found here: https://brainly.com/question/1247523

#SPJ1

If 0.5 mol of mono-alkanoic acid weighs 44 g determine the molecular formula and the name of the acid​

Determine quantitative density of a liquid whose mass is 62 g and whose volume is 31 mL. A block or wood with the dimensions 3 cm x 2 cm x 5 cm and a heft of 22.5 g (2 g/mL)

How do you calculate a block of wood's volume?

Result for an image A timber block weighs 22.5 grammes and has dimensions of 3 cm x 2 cm x 5 cm. What is that?

It is simple to determine the volume of such a block, prism, a cylinder by multiplying the base's area by the object's height or altitude.

How is block mass determined?

Multiply the volume and density together.

You may get the mass of your object by multiplying your two numbers together. You'll notice that you end up having units of mass if you keep track of both the units as you go along (kilograms or grams). A diamond, for instance, has a volume of 5,000 cm3 and a density of 3.52 g/cm3.

To know more volume about :-

https://brainly.com/question/1578538

SPJ1

Determine quantitative density of a liquid whose mass is 62 g and whose volume is 31 mL. A block or wood with the dimensions 3 cm x 2 cm x 5 cm and a heft of 22.5 g (2 g/mL)

Result for an image A timber block weighs 22.5 grammes and has dimensions of 3 cm x 2 cm x 5 cm. What is that?

It is simple to determine the volume of such a block, prism, a cylinder by multiplying the base's area by the object's height or altitude.

Multiply the volume and density together.

You may get the mass of your object by multiplying your two numbers together. You'll notice that you end up having units of mass if you keep track of both the units as you go along (kilograms or grams). A diamond, for instance, has a volume of 5,000 cm3 and a density of 3.52 g/cm3.

To know more volume about :-

brainly.com/question/1578538

#SPJ1

Approximately 0.26 moles of CO2 fill the container.

To determine the number of moles of CO2 that fill the container, we can use the ideal gas law equation:

PV = nRT

Where:

P = pressure of the gas (1.00 atm)

V = volume of the gas (6.28 L)

n = number of moles of gas (unknown)

R = ideal gas constant (0.0821 L·atm/mol·K)

T = temperature of the gas in Kelvin (293 K)

Rearranging the equation, we have:

n = PV / RT

Substituting the given values:

n = (1.00 atm) * (6.28 L) / (0.0821 L·atm/mol·K) * (293 K)

Calculating the expression:

n = 6.28 / 24.0513

n ≈ 0.26 moles

Therefore, approximately 0.26 moles of CO2 fill the container.

It's worth noting that the answer is rounded to two decimal places, as the given values were provided with two decimal places. Additionally, the calculation assumes ideal gas behavior and that there are no other gases or impurities present in the container.

For more such question on moles visit:

https://brainly.com/question/29367909

#SPJ8

To extract a very non-polar organic substance from a reaction that is run in ethanol, one possible method would be to use a liquid-liquid extraction technique.

This involves separating the non-polar product from the polar ethanol solvent by using a non-polar solvent that is immiscible with ethanol. One common non-polar solvent that can be used for this purpose is hexane. Hexane is immiscible with ethanol and is a good solvent for non-polar compounds. To extract the product, the reaction mixture is first cooled to separate any solid that may have formed. Then, the reaction mixture is added to a separatory funnel and the hexane is slowly added to the top of the funnel.

The two layers will separate and the hexane containing the non-polar product can be drained off the bottom of the funnel. The hexane layer is then washed with a small amount of aqueous solution (such as water or an aqueous solution of an acid or a base) to remove any remaining polar impurities and then dried over anhydrous salt (such as Na2SO4 or MgSO4) to remove any traces of water. After this process, the hexane can be evaporated to obtain the purified non-polar product.

Learn more about Liquid-liquid Extraction here: https://brainly.com/question/13345735

#SPJ4

Although this sounds fantastic, there is still a lot of debate around the usage of GMOs, and there are good reasons why they shouldn't be used in food, as suggested by Option D, because there isn't enough data on the long-term impacts of consuming GMOs.

The GMO debate centres on genetic material that has been purposefully altered using genetic engineering techniques for improved production, disease resistance, etc. It is unclear at this time whether these modifications are safe for ingestion by humans or the environment. Long-term study should be required for this because some studies have found GMO to be hazardous, such as causing diabetes, while others have found it to be beneficial.

Because there isn't enough data on the long-term effects of consuming GMOs, as Option D says, there is still a lot of controversy around the usage of GMOs and good reasons why they shouldn't be used in food.

To learn more about GMOs from given link

https://brainly.com/question/873883

#SPJ4

Complete Question -

Genetically-Modified Organisms (GMOs) are currently being developed for agriculture. Currently commercialized GM crops in the U.S. include soy (94%), cotton (90%), canola (90%), sugar beets (95%), corn (88%), and Hawaiian papaya (more than 50%). The use of GMO crops can reduce agricultural costs to farmers and provide greater crop-yields, possibly helping with issues of food shortages. Although this sounds great, there is still a lot of controversy around the use of GMOs. Which of these is a valid argument on why we should not use GMOs in our food?

A) GMOs do not have any nutritional value

B) GMO crops are always more expensive to buy

C) GMO crops are invasive and take over the habitat of local crops

D) there is not enough research on long-term effects of eating GMOs

Option A has the correct order of compounds that are arranged in order of increasing strength of intermolecular forces.

Intermolecular forces are those forces which binds the molecules together in any matter whether it be solid, liquid or gas. The strength of these forces may differ from one matter to other and are also weaker in nature as compared to the covalent bonding.

These forces determine bulk properties, such as melting points of solids and boiling points of liquids. Intermolecular forces are electrostatic in nature and arise from the interaction between positively and negatively charged species.

Here are some types of intermolecular forces that exists in nature:

Learn more about Dipole-Dipole interactions here:

https://brainly.com/question/29788491

#SPJ4

According to studies, convection ovens generally cook 25% faster than traditional ovens at a lower cooking temperature of roughly 25 degrees F, even if cooking times vary slightly between ovens.

Convection ovens, in contrast to conventional radiant (also known as thermal) ovens, include a fan that evenly distributes air inside the chamber, removing hot and cold regions.

A convection oven may cook food up to 25% more quickly than a regular oven.

Food cooks roughly 25% more quickly in a convection oven because hot air is blown directly onto it rather than merely surrounding it.

Convection ovens heat up more quickly and cook food more quickly. Thanks to some straightforward modifications to the appliance, they also cook more evenly.

All of this results in tastier baked goods, meats, and other foods.

Overall, the convection oven option is excellent if you want a crisp, rapid result, but stick with the regular oven if you want your food to retain moisture or rise before it is fully baked.

To learn more about Convection oven from given link

https://brainly.com/question/15700369

#SPJ1

Electrons are subatomic particles that are found in the energy levels swirling around the nucleus on an electron cloud and are negatively charged.

What is meant by nucleus ?

To learn more about nucleus refer to

https://brainly.com/question/9376695

#SPJ4

Answer:

I believe the answer is True

Explanation:

I could be wrong but in order for Chlorine 35 and Chlorine 37 to be different would they have to have a different amount of electrons? I am sorry if this is wrong. I took Chemistry a few years ago.

Answer:

The number after the name 'chlorine' is called the mass number. The mass number is a tally of the number of protons and the number of neutrons in an atom's nucleus. Since all atoms of chlorine contain 17 protons, chlorine-35 and chlorine-37 differ in the number of neutrons each one has.

Explanation:

So its true lol

:)

When radioactive atoms decay, they give off alpha particles, beta particles, and gamma rays in addition to radiation.

Alpha particles are made up of two protons and two neutrons, making them similar to a helium nucleus. They have a positive charge and are relatively large and slow-moving. Beta particles are high-energy electrons or positrons, and are much smaller and faster than alpha particles. They have a negative charge. Gamma rays are high-energy electromagnetic radiation, similar to X-rays. They have no mass and no charge and are the most energetic and penetrating of the three types of particles. These particles are emitted during the radioactive decay process, and the type and amount of particles emitted depends on the specific isotope undergoing decay.

To know more about radioactivity

https://brainly.com/question/1770619

#SPJ4

Predicting the products of chemical reactions involves understanding the reactants and the type of chemical reaction taking place.

What are those reactions?

To learn more about chemical reactions refer to:

https://brainly.com/question/29762834

A neutron is a subatomic particle found in the nucleus of every atom except that of simple hydrogen. The particle derives its name from the fact that it has no electrical charge; it is neutral. Neutrons are extremely dense.

What is meant by neutron ?

To learn more about neutron refer to

https://brainly.com/question/11927555

#SPJ4

Answer:

Mass = 145g H

Explanation:

-First we need to convert atoms to moles :

1mole =6.022 ×10^23 atoms (The number of particles in 1 mole is called Avogadro's Number (6.0221421 x 1023))

8.65×10^23 atoms of H ×1 mol / 6.022×10^23

=1.45×10^2

=145 mol

- then convert moles to grams :

Mass in grams of H

Mass = number of moles ×molar mass for H

= 145 mol ×1 g/mol

= 145 g

The process that creates chemical elements lighter than iron is known as nuclear fusion and the evidence is the fusion of carbon and helium nuclei which forms an oxygen nucleus, and so on.

This is referred to as the type of reaction which is characterized by two or more atomic nuclei being combined to form one or more different atomic nuclei and subatomic particles.

It is also responsible for the creation of chemical elements lighter than iron through successive reactions and a common example is the fusion of carbon and helium nuclei to form an oxygen nucleus thereby making it the correct choice.

Read more about Nuclear fusion here https://brainly.com/question/982293

#SPJ1

The mass of the hydrogen gas produced is equal to 0.368 g, not 0.322 this is wrong mass .

The reaction between calcium and water yields the following balanced chemical equation: 2 Ca  + 2 H₂O  →  2 CaOH + H₂

that the mass of calcium is 14.7 g,

the number of moles of calcium is 14.7/40, which equals 0.3675 mol.

The number of moles of water is 11.5/18, which equals 0.638 mol.

Two moles of calcium react with two moles of water.

Calcium is therefore a limiting reagent.

The mass of 0.1838 mol of hydrogen gas is 0.368 g, and 0.3675 mol of Ca produces hydrogen gas. A balanced chemical equation is one in which both sides of the equation have the same number of atoms.

The reactant that is consumed first in a chemical reaction, also known as the limiting reagent, limits the amount of product that can be produced.

Learn more about chemical equation:

brainly.com/question/23877810

#SPJ1

Add dilute hydrochloric acid to calcium carbonate, bubbles of carbon dioxide gas appear.

These are the steps in this procedure:

a) The component marked J is a heatproof mat that acts as a stable, heat-resistant basis to stop the test tube from shattering as a result of the heat produced.

A test tube is the item with the label K.

This is utilized to keep the reactants in check. The L-shaped component is a delivery tube.

through which the gas produced is piped into the delivery tube.

The M-designated component is a bung.

It serves to keep the generated gas inside the test tube.

Diluted hydrochloric acid, which is the component with the letter N, serves as the reactant that creates the gas.

A delivery tube is the component with the letter P.

It is employed to gather the gas generated.

b) The L-shaped component's job is to route the created gas into the delivery tube.

The P-shaped component's job is to collect the created gas.

c) Downward delivery is the mechanism used to collect the created gas.

This is accomplished by joining the delivery tube to the test tube and submerging the delivery tube's tip in a water beaker.

This enables the generated gas to pass through the delivery tube and into the water-filled beaker.

d) A burning candle or a glowing splinter can be used to detect the gas created.

To learn more about preparation of carbon dioxide refer :

https://brainly.com/question/1301348

#SPJ1

Answer: It all boils down to the two cities' proximity to the Pacific Ocean, along with wind currents and geographical location

Explanation: It is known throughout the whole scientific community that a body of water near a city produces very stable temperatures throughout the year with small dips. When it is summer, instead of San Diego boiling in the heat, the Pacific absorbs most of this heat, making the heat in the city tolerable (almost), this makes the ocean appear cold in the summer.

When it turns to winter, the heat absorbed by the ocean in the summer gets radiated making the cold in San Diego negligible. Applying this same logic to Mount Laguna, which is not near a body of water, it can be understood that it would have more extreme temp. swings.

Along with water, there is wind currents. I don't live in Mount Laguna, but I have to assume from the context you gave me that a cold wind current usually flows there, making it colder than in San Diego, which has a warm current.

The location also matters, if this town is under a valley, canyon, or mountain it could be under a shadow further decreasing the temp. more than San Diego.

Hopefully this helps, and good luck!