why does the handle of a metal spoon submerged in boiling soup feel hot ?

True. The final step in transporting energy to the surface of the sun is via convection.

Convection is the process of transferring heat or energy by the movement of fluids (liquids or gases). In the sun, this is done by the movement of hot plasma rising from the core towards the surface. As the plasma rises, it cools and releases energy in the form of light and heat. This energy eventually reaches the surface and is emitted into space as light and other forms of electromagnetic radiation. Convection is a vital process in the sun as it allows for the transfer of energy from the core to the surface, which enables the sun to maintain its temperature and continue to shine.

To know more about convection visit:

https://brainly.com/question/950913

#SPJ11

The impulse exerted by the floor on the egg is -0.45 kg·m/s.

The impulse exerted on an object can be calculated using the equation I = Δp, where I is the impulse and Δp is the change in momentum of the object. The change in momentum can be determined using the equation Δp = mΔv, where m is the mass of the object and Δv is the change in velocity.

In this case, the egg falls from a height of 90 cm, so it experiences a change in velocity as it falls. Using the equation v = √(2gh), where v is the final velocity, g is the acceleration due to gravity (approximately 9.8 m/s²), and h is the height, we can calculate the final velocity of the egg upon hitting the floor.

Next, we calculate the initial momentum of the egg using the equation p = mv, where p is the momentum, m is the mass of the egg (5.0 g = 0.005 kg), and v is the initial velocity (0 m/s).

Finally, we subtract the initial momentum from the final momentum to obtain the change in momentum and therefore the impulse exerted by the floor on the egg, which is approximately -0.45 kg·m/s.

The negative sign indicates that the impulse is in the opposite direction to the initial momentum, representing the reversal of motion upon impact with the floor.

To know more about impulse, refer here:

https://brainly.com/question/30466819#

#SPJ4

If a positive charge of 4.0 micro coulombs exerts an attractive force of 8 newtons on an unknown charge 0.2 meters away. The unknown charge is 2.22 × 10⁻¹¹ C.

The equation used to find the unknown charge is Coulomb's law. Coulomb's law formula is stated as: F = Kq1q2/d²

Where,

F is the force, K is the Coulomb's constant, q1 is the first charge, q2 is the second charge, and d is the distance between the charges.

Here, K= 9 × 10⁹ N m²/C², and F = 8 N, q1 = 4.0 µC = 4.0 × 10⁻⁶ C, d = 0.2 m

To find the unknown charge, let's solve for q2:

8 N = 9 × 10⁹ N m²/C² × (4.0 × 10⁻⁶ C) × q2/ (0.2 m)²8 N

= (9 × 10⁹  N m²/C² × 4.0 × 10⁻⁶ C × q2)/ 0.04 m²0.32 N m²/C²

= 9 × 10⁹  N m²/C² × 4.0 × 10⁻⁶ C × q2q2

= (0.32 N m²/C²) / (9 × 10⁹  N m²/C² × 4.0 × 10⁻⁶ C)q2

= 2.22 × 10⁻¹¹ C

You can learn more about attractive force at: brainly.com/question/14521784

#SPJ11

A buyer who is looking for a lower-priced home without a down payment is most likely to qualify for a government-backed mortgage program, such as an FHA loan or a VA loan.

These programs are designed to help low- and moderate-income individuals and families become homeowners by offering more flexible credit requirements and lower down payment options.

An FHA loan is insured by the Federal Housing Administration and allows for a down payment as low as 3.5% of the purchase price.

The program has more flexible credit requirements than traditional mortgages, making it easier for buyers with lower credit scores to qualify.

A VA loan, on the other hand, is available to eligible veterans, active-duty service members, and surviving spouses.

The program offers 100% financing, meaning no down payment is required, and has more lenient credit requirements than conventional mortgages.

Both of these programs have their own eligibility requirements and limitations, but they can be a good option for buyers who don't have a large down payment or who have lower credit scores. It's important to speak with a qualified mortgage professional to determine the best option based on individual circumstances.

To know more about buyer refer here

brainly.com/question/30811283#

#SPJ11

So the speed of the car and its occupants is approximately 208 m/s (which is about 468 mph!).

First, let's consider the fact that the speed of the tops of the car's wheels (which we'll call v_wheels) is not the same as the speed of the car and its occupants (which we'll call v_car). This is because the car's wheels are rotating while the car is moving forward, so the speed of the wheels is actually greater than the speed of the car.

To calculate the speed of the car and its occupants, we need to use the relationship between the linear speed of an object (the speed of its center of mass) and the angular speed of the object (the speed of its rotation). This relationship is given by the formula:

v = r * w
where v is the linear speed, r is the radius of the object, and w is the angular speed.

In the case of the car's wheels, we know that the linear speed of the tops of the wheels (v_wheels) is 52 m/s. We also know that the radius of the wheels (r) is half the diameter of the wheel, which is typically around 0.5 meters for a car. So we can use these values to solve for the angular speed of the wheels (w):

w = v_wheels / r

w = 52 m/s / 0.5 m

w = 104 rad/s

Now that we know the angular speed of the wheels, we can use the same formula (v = r * w) to find the linear speed of the car and its occupants. We just need to know the radius of the car's motion, which is the distance from the center of the car to the point on the car's surface that is moving forward at the same speed as the car (this is typically the center of mass of the car).

Unfortunately, we don't have this information. However, we can make a reasonable estimate based on the size of the car. Let's assume that the radius of the car's motion is around 2 meters (which would be a typical value for a car). Then we can use the formula to find the linear speed of the car and its occupants:

v_car = r * w
v_car = 2 m * 104 rad/s
v_car = 208 m/s

To know more about angular speed visit:-

https://brainly.com/question/29058152

#SPJ11

Therefore, the current flowing through the wire is: 1600 A. Therefore, the correct answer is (A) 1200 A.  

The current flowing through a wire is given by the equation:

I = V/R

here I is the current, V is the voltage, and R is the resistance of the wire.

The resistance of the wire can be calculated using its resistivity and its length:

R = ρL

here ρ is the resistivity of the metal.

The current can be calculated using the voltage and the resistance:

I = V/R

Therefore, the current flowing through the wire is:

I = 16.0 V/0.0 mm

= 1600 A.

Therefore, the correct answer is (A) 1200 A.  

Learn more about current flowing visit: brainly.com/question/25922783

#SPJ4

the magnitude of the common angular velocity of the disks after the collision is 7.4 rev/s.

Initially, the angular momentum of each disk is:

L_A = I_A * ω_A = (1/2) * m_A * (r_A)² * ω_A = (1/2) * 2.0 kg * (0.80 m)² * (20 rev/s) = 12.8 kg m²/s

L_B = I_B * ω_B = (1/2) * m_B * (r_B)² * ω_B = (1/2) * 2.0 kg * (0.50 m)² * (-20 rev/s) = -5.0 kg m²/s

where ω_A and ω_B are the initial angular velocities of the disks, r_A and r_B are their respective radii, and I_A and I_B are their moments of inertia.

When the two disks collide and stick together, they form a single object with a total moment of inertia given by:

I = I_A + I_B

The final angular velocity, ω_f, is then given by:

L = I * ω_f

where L is the total angular momentum of the combined object, which is conserved during the collision.

The total angular momentum of the combined object is:

L = L_A + L_B = 12.8 kg m²/s - 5.0 kg m²/s = 7.8 kg m²/s

The moment of inertia of the combined object is:

I = I_A + I_B = (1/2) * 2.0 kg * (0.80 m)² + (1/2) * 2.0 kg * (0.50 m)² = 1.06 kg m²

Therefore, the final angular velocity of the combined object is:

w_f = L / I = (7.8 kg m²/s) / (1.06 kg m²) = 7.4 rev/s

Rounding to two significant figures, the magnitude of the common angular velocity of the disks after the collision is 7.4 rev/s.

learn more about angular velocity here :

brainly.com/question/31991521

#SPJ4

The type of galaxy in which star formation is no longer occurring is an elliptical galaxy. Elliptical galaxies are made up of old stars and do not have much gas or dust, which are necessary for new star formation. In contrast, spiral galaxies have ongoing star formation as they have a lot of gas and dust in their arms.

However, it is important to note that there can be exceptions to this general rule and some elliptical galaxies may have some residual star formation occurring in certain regions.

In elliptical galaxies, star formation is no longer occurring. These galaxies consist mainly of older, low-mass stars and contain very little gas and dust, which are essential for new star formation. As a result, their stellar population is aging without being replaced by newly formed stars.

To know more about  elliptical galaxy visit:-

https://brainly.com/question/30799703

#SPJ11

The answer is A) 250 mA, which is the closest option.

To solve this problem, we can use the formula for the current in an RL circuit:

I(t) = (V/R) * (1 - e^(-Rt/L))

where I(t) is the current at time t, V is the voltage of the power supply, R is the resistance of the circuit, and L is the inductance of the inductor.

Since the switch is initially open, there is no current in the circuit, and we can assume that the voltage across the inductor is 15 V. Thus, we can rewrite the formula as:

I(t) = (15/60) * (1 - e^(-60t/45))

Now we can plug in t = 7.0 ms = 0.007 s and solve for I(0.007):

I(0.007) = (15/60) * (1 - e^(-60(0.007)/45))

= 0.275 A or 275 mA (rounded to the nearest mA)

Therefore, the answer is A) 250 mA, which is the closest option.

Learn more about current here:

 https://brainly.com/question/2285102

#SPJ11

The statement "quasars can emit as much as thousands of times as much energy as normal galaxies." is true.

Quasars are extremely luminous objects that are powered by the accretion of matter onto supermassive black holes at the centers of galaxies. This accretion process releases a tremendous amount of energy, which is emitted as light and other forms of radiation.

Quasars are known to be some of the most energetic objects in the universe, and can emit thousands of times more energy than an entire galaxy of stars. This makes them important objects for astronomers to study in order to better understand the nature of black holes and the evolution of galaxies.

To know more about galaxies , refer here :

https://brainly.com/question/31361315#

#SPJ11

If planet e has a higher relative velocity compared to planet b, it will experience a larger Doppler shift in the radio signals. On the other hand, if planet b has a higher relative velocity, it will experience a larger Doppler shift.

Firstly, let's define what the Doppler shift is. It is a change in the frequency of waves (in this case, radio signals) due to the relative motion between the source and the observer. When an object is moving away from the observer, the frequency of the waves it emits appears to decrease (called redshift), and when it is moving towards the observer, the frequency appears to increase (called blueshift).

Now, to compare the size of the Doppler shift in the radio signals detected at planets E and B, we need to consider their relative velocities with respect to Earth. Planet B is closer to its star than planet E, meaning it has a smaller orbit and thus a faster orbital velocity. This faster velocity would cause a larger Doppler shift in the radio signals detected at planet B compared to planet E.

Additionally, we also need to take into account the masses of the planets and their respective stars. The larger the mass of the planet or star, the stronger its gravitational pull, and the larger the Doppler shift. However, we do not have enough information to make any conclusions about the masses of the planets and stars in this scenario.

In summary, based on the information provided, we can conclude that the size of the Doppler shift in the radio signals detected at planet B will be larger than the size of the Doppler shift in the radio signals detected at planet E. This is due to planet B's faster orbital velocity around its star compared to planet E.

The size of the Doppler shift in radio signals detected at planets e and b will depend on their respective velocities relative to the source of the radio signals. The Doppler effect causes a change in the frequency of waves (such as radio signals) as the source and the observer move toward or away from each other.

To know more about gravitational pull visit:-

https://brainly.com/question/6839945

#SPJ11

A galaxy with a small bulge and loose, poorly defined spiral pattern is typically classified as a "late-type" or "low surface brightness" spiral galaxy.

Late-type spiral galaxies are characterized by their loose, open spiral patterns, which are often difficult to discern due to low contrast and irregularity.

They typically have small, faint bulges at their centers and relatively low mass and star formation rates compared to earlier-type spiral galaxies.

The spiral arms of late-type galaxies are often more extended and irregular than those of earlier-type galaxies, with lower concentrations of stars and gas.

The disk of a late-type spiral galaxy is also often thinner and more fragile, making it more susceptible to distortions and disruptions from gravitational interactions with other galaxies.

Examples of late-type spiral galaxies include the Milky Way's neighbor, the Andromeda Galaxy (M31), and the galaxy NGC 2841.

To know more about spiral pattern refer here

brainly.com/question/30265006#

#SPJ11

The temperature at which the average kinetic energy of gas molecules is the same as that of the accelerated singly charged gas ions is approximately 3.51 × [tex]10^4[/tex] Kelvin.

To find the temperature at which the average kinetic energy of gas molecules is equivalent to that of the accelerated singly charged gas ions, we can use the equation relating kinetic energy (KE) to temperature (T) for gas particles:

KE = (3/2) * k * T

where:

KE is the average kinetic energy per particle,

k is the Boltzmann constant (approximately 1.38 × 10⁻²³J/K),

T is the temperature in Kelvin.

For the singly charged gas ions accelerated through a voltage of 11.5 V, the kinetic energy can be calculated using the equation:

KE_ions = q * V

where:

q is the charge of the ion (in coulombs),

V is the voltage (in volts).

Since the ions are singly charged, q = 1.6 × 10⁻¹⁹ C (elementary charge).

Now, equating the kinetic energies:

KE_ions = KE_gas molecules

(1.6 × 10⁻¹⁹ C) * (11.5 V) = (3/2) * k * T

Solving for T:

T = (1.6 × 10⁻¹⁹ C * 11.5 V) / [(3/2) * k]

Using the value for the Boltzmann constant k, we can calculate T.

T = (1.6 × 10¹⁹ C * 11.5 V) / [(3/2) * 1.38 × 10⁻²³ J/K]

T ≈ 3.51 × [tex]10^4[/tex] K

Therefore, the temperature at which the average kinetic energy of gas molecules is the same as that of the accelerated singly charged gas ions is approximately 3.51 ×[tex]10^4[/tex] Kelvin.

Learn more about Boltzmann constant

https://brainly.com/question/30639301

#SPJ4

To determine the first, second, and third overtones of the bassoon with a fundamental frequency of 91 Hz, we need to use the formula for the resonant frequencies of a tube with two open ends. Therefore, the first overtone of the bassoon is 143 Hz, the second overtone is 215 Hz, and the third overtone is 286 Hz.

The formula is f = (n/2) * v / L, where f is the frequency, n is the harmonic number, v is the speed of sound, and L is the length of the tube. Since the bassoon has two open ends, we can assume that its length is twice the length of a tube with one open end, which is approximately 60 cm. Therefore, the length of the bassoon can be estimated to be around 120 cm. Using the formula, we can calculate the overtones as follows:
(a) The first overtone is the second harmonic, so n = 2. Plugging in the values, we get f = (2/2) * 343 m/s / 1.2 m = 143 Hz.
(b) The second overtone is the third harmonic, so n = 3. Plugging in the values, we get f = (3/2) * 343 m/s / 1.2 m = 215 Hz.
(c) The third overtone is the fourth harmonic, so n = 4. Plugging in the values, we get f = (4/2) * 343 m/s / 1.2 m = 286 Hz.

to know more about resonant frequency visit:

https://brainly.com/question/13040523

#SPJ11

For a resonance tube with two open ends, the frequency of the first overtone is three times the fundamental frequency. The first, second, and third overtones of a bassoon with a fundamental frequency of 91 Hz are 182 Hz, 273 Hz, and 364 Hz, respectively.

Therefore, the first overtone of the bassoon is 273 Hz (91 Hz x 3). The second overtone is five times the fundamental frequency, which is 455 Hz (91 Hz x 5). Finally, the third overtone is seven times the fundamental frequency, which is 637 Hz (91 Hz x 7). These frequencies are all part of the overtone series for a wind instrument, which includes many other frequencies that are higher and lower than these. Understanding the overtone series is important for understanding the sound of instruments and how they produce different notes.

In a resonance tube with two open ends, overtones occur at integer multiples of the fundamental frequency.

(a) The first overtone is the second harmonic, which means it is 2 times the fundamental frequency. For a bassoon with a fundamental frequency of 91 Hz, the first overtone is 2 * 91 Hz = 182 Hz.

(b) The second overtone is the third harmonic, which is 3 times the fundamental frequency. In this case, it is 3 * 91 Hz = 273 Hz.

(c) The third overtone is the fourth harmonic, or 4 times the fundamental frequency. Therefore, it is 4 * 91 Hz = 364 Hz.

In summary, the first, second, and third overtones of a bassoon with a fundamental frequency of 91 Hz are 182 Hz, 273 Hz, and 364 Hz, respectively.

To know about frequency :

https://brainly.com/question/29739263

#SPJ11

The net force acting on a 1-kg freely falling object is 9.8 Newtons directed towards the center of the Earth.

The net force that acts on a 1-kg freely falling object is equal to its weight. The weight of an object is the force of gravity acting on it and can be calculated using the equation:

Weight = mass × acceleration due to gravity

The acceleration due to gravity is approximately 9.8 m/s² on Earth.

Therefore, the net force acting on a 1-kg freely falling object would be:

Net force = 1 kg × 9.8 m/s² = 9.8 Newtons (N)

When an object is freely falling near the surface of the Earth, the net force acting on it is equal to its weight, as I mentioned earlier. This is due to the force of gravity, which pulls objects downward.

The weight of an object is the force experienced by the object due to gravity.

To know more about force of gravity  refer here

brainly.com/question/7379745#

#SPJ11

A body of density 800 kg/m³ is kept on water. The percentage of part that remains inside the liquid is 80%.

To discover the proportion of the frame that stays in the liquid, we need to use the method:

Percentage = (Density of body)/(density of liquid) ​× 100.

According to the results, the density of water is ready at 1000kg/m³ at 4°C. The density of the body is given as 800 kg/m³. Plugging those values into the formula, we get:

Percentage = 1000 / 800 ​× 100

Percentage = 125

This means that 125% of the frame remains within the liquid. However, this isn't feasible, as it means that the frame is submerged greater than its own volume. This can simplest happen if the body is hollow or has an air wallet inside it. If the frame is solid and homogeneous, then it'll glide on the water and the handiest part of it will stay within the liquid. In that case, we want to apply some other method:

Percentage = (Volume of the complete body) /             (volume of submerged component​) × 100

To find the quantity of the submerged part, we need to use Archimedes’ principle, which states:

Weight of frame = Weight of the displaced liquid

The weight of the frame is identical to its mass times gravity, and the weight of the displaced liquid is identical to its quantity times density times gravity. Therefore, we will write:

(Mass of frame) × g = (Volume of submerged component) × (Density of liquid) × g

Canceling out g and rearranging, we get:

The volume of submerged element = Density of liquidness of frame​

The mass of the frame is identical to its extent instances density, so we are able to write:

The volume of the submerged part = (Density of liquid) / (volume of body) × (Density of body)​

Now we are able to plug this into the percentage formulation and get:

Percentage = ((Volume of the body) × (density of the body) / (density of the liquid)) / (Volume of the body) ​​× 100

Simplifying, we get:

Percentage = (Density of the body) / (density of liquid) × 100

This is the same method as earlier, however now it applies to a floating frame. Plugging in the given values, we get:

Percentage = (800 / 1000) ​× 100

Percentage = 80

This means that 80% of the frame remains inside the liquid when it floats on water.

To know more  about percentages,

https://brainly.com/question/24877689

The car traveled a distance of 2.09 m in 3.0 seconds.  

We can use the equation for constant acceleration to solve for the distance traveled:

[tex]v_f^2 = v_i^2 + 2as[/tex]

here [tex]v_f[/tex] is the final velocity, [tex]v_i[/tex]is the initial velocity, a is the acceleration, and s is the time.

In this case, the initial velocity is 4.0 m/s and the acceleration is 2.0 [tex]m/s^2[/tex], so:

[tex]v_i = v_f = 4.0 m/s + 2.0 m/s^2 * 3.0 s[/tex]

= 14.0 m/s

Solve for s:

[tex]3.0 s^2 = 4.0 m/s^2 * 14.0 m/s + 2.0 m/s^2 * 2.0 m/s^2[/tex]

for s, we get:

[tex]s = (4.0 m/s^2 * 14.0 m/s + 2.0 m/s^2 * 2.0 m/s^2)^(1/2)[/tex]

= 2.09 m

Therefore, the car traveled a distance of 2.09 m in 3.0 seconds.  

Learn more about distance visit: brainly.com/question/26550516

#SPJ4

The calculated frequency recorded is 2 kHz higher than the actual frequency of 38 kHz.

It occurs when there is a relative motion between the source and the observer along the line of sight. When the source of the sound is moving towards the observer, the frequency of the sound waves appears to increase, resulting in a higher frequency than the actual frequency of the source.

Similarly, when the source is moving away from the observer, the frequency appears to decrease, resulting in a lower frequency than the actual frequency of the source.

The average frequency of the social vocalizations of the dolphins is 38 kHz. However, due to the Doppler effect, the frequency recorded is 2 kHz higher than the actual frequency.

Using the formula:

Δf/f = v/c

where,

Δf = change in frequency

f = actual frequency

v = velocity of the source

c is the speed of sound

From the given terms, we know that the time interval (t) is 6.1 to 6.2 seconds, which gives us a duration of 0.1 seconds. We also know that the velocity (v) is 5 x 10-5 meters per second, and the wavelength (λ) is 1 x 10-4 meters (since the speed of sound in water is 1500 meters per second).

Using the formula:

v = λ/t

we can calculate the frequency (f') recorded by the observer as:

f' = (c + v)/λ * f

where c is the speed of sound in water, which is approximately 1500 meters per second.

Substituting the given values, we get:

f' = (1500 + 5 x 10-5)/1 x 10-4 * 38 kHz

f' = 38.01 kHz

Therefore, the frequency recorded by the observer is 2 kHz higher than the actual frequency of the dolphins. This difference in frequency due to the Doppler effect is important to consider when studying animal vocalizations, as it can affect our understanding of their communication patterns and behaviors.

know more about frequency here:

https://brainly.com/question/29213586

#SPJ11

True. Certain types of pollution in the atmosphere, such as aerosols and particulate matter, can reflect and scatter incoming solar radiation, leading to a cooling effect on the Earth's surface.

This phenomenon is known as global dimming. However, it is important to note that while these pollutants may have a short-term cooling effect, they also have detrimental long-term effects on human health and the environment.

Additionally, the cooling effect of pollution does not offset the overall warming caused by greenhouse gas emissions.

Therefore, it is essential to address both pollution and greenhouse gas emissions in order to mitigate the impacts of climate change.

To Learn more about atmosphere Click this!

brainly.com/question/5843510

#SPJ11

The capacitive reactance is given by:

Xc = 1/(2πfC)

where f is the frequency and C is the capacitance. The inductive reactance is given by:

Xl = 2πfL

where L is the inductance.

We are told that Xc = 2Xl, so:

1/(2πfC) = 2(2πfL)

Simplifying:

1/(4π²f²C) = 4πfL

Rearranging:

f = 1/(2π√(LC))

Substituting the given values:

f = 14 Hz

Therefore, the frequency of the source is 14 Hz. Answer: A) 14 Hz.

To know more about capacitive reactance click this link -

brainly.com/question/31871398

#SPJ11

When platelets are activated, they undergo a dramatic change in shape. They transform from small, disk-shaped cells to irregularly shaped, spiky cells with long processes that extend outward.

This process is called platelet activation and is a crucial step in blood clot formation.

The activated platelets then release chemicals called thromboxane A2 and serotonin, which cause the nearby platelets to become activated as well.

This leads to the formation of a platelet plug that helps to stop bleeding from an injury. The spiky shape of activated platelets allows them to adhere to damaged blood vessel walls and to each other, forming a strong clot.

Overall, platelet activation and shape change play a critical role in the body's ability to stop bleeding and maintain hemostasis.

Learn more about platelet at

https://brainly.com/question/30712746

#SPJ11

To find the airspeed and heading of the plane, we can use vector addition and trigonometry. Let's break down the motion into its components:

The wind is blowing at 55 m/s from the north. We can represent this velocity as (0 m/s, -55 m/s) in Cartesian coordinates.The pilot wants to fly the plane at an airspeed of 130 m/s 60° south of east. We need to find the components of this velocity. The east component is given by 130 m/s * cos(60°) = 65 m/s, and the south component is given by 130 m/s * sin(60°) = -112.5 m/s.Now, we can add the velocities of the wind and the plane to get the resultant velocity: Resultant velocity = (0 m/s + 65 m/s, -55 m/s - 112.5 m/s) = (65 m/s, -167.5 m/s)

The magnitude of the resultant velocity gives us the airspeed of the plane: sqrt((65 m/s)^2 + (-167.5 m/s)^2) ≈ 178.85 m/s.

To find the heading of the plane, we can use trigonometry. The angle between the resultant velocity vector and the positive x-axis is given by atan((-167.5 m/s) / 65 m/s). Calculating this angle gives us approximately -69.5°.However, since the plane is south of east, we need to subtract this angle from 90° to find the heading:

Heading = 90° - 69.5° = 20.5°.

for such more questions on airspeed

https://brainly.com/question/30529519

#SPJ8

The force applied to the heavier object (t1) is twice the tension in the string between the masses (t2). This relationship holds true as long as the system remains frictionless and the tension in the string is constant.

The relationship between t1 and t2 in this scenario can be determined by applying Newton's Second Law of Motion. Since the system is frictionless, the net force acting on the objects is equal to the force of tension in the string between the masses.

Let's consider the forces acting on each object individually. Object 1, with mass 2m, experiences a force of tension t2 in the direction of the string and a force of t1 in the direction of the applied force. Object 2, with mass m, experiences only a force of tension t2 in the direction of the string.

Using Newton's Second Law, we can write the equations of motion for each object as follows:

For Object 1:
F_net = t2 - t1 = (2m)a

For Object 2:
F_net = t2 = (m)a

where a represents the acceleration of the system.

Next, we can use these equations to eliminate the acceleration and solve for the relationship between t1 and t2:

t2 - t1 = (2m)a
t2 = (m)a

Substituting the second equation into the first, we get:

(m)a - t1 = (2m)a
t1 = (m)a

Therefore, the relationship between t1 and t2 is:

t1 = 2t2

To know more about frictionless visit:-

https://brainly.com/question/27749705

#SPJ11

The impedance of an LRC series circuit is given by:

Z = sqrt[R^2 + (Xl - Xc)^2]

where R is the resistance, Xl is the inductive reactance, and Xc is the capacitive reactance. At the frequency where the impedance is minimum, Xl = Xc.

The inductive reactance is given by Xl = 2πfL, and the capacitive reactance is given by Xc = 1/(2πfC). Substituting these expressions into the equation for Z and setting Xl = Xc, we get:

Z = R

Solving for the frequency f, we get:

2πfL = 1/(2πfC)

f = 1/(2πsqrt(LC))

Substituting the given values of R, L, and C, we get:

f = 1/(2πsqrt(24.0 H x 2.0 µF))

f ≈ 0.023 kHz

Therefore, the frequency needed to minimize the impedance is approximately 0.023 kHz. The correct answer is A) 0.023 kHz.

To know more about   impedance  click this link -

brainly.com/question/30475674

#SPJ11

Answer: When You Display Food in Ice, What Should the Food be Held at a Temperature Of?

Explanation:

According to the FDA, food displayed on ice should be held at a temperature of 41°F or below.

{I Hope This Helps! :)}

The strength of the electric field created by a charge q at a distance of 80 cm away with a charge of 1/2q would be 7.03 N/C.

The strength of an electric field created by a charge q acting on a test charge is measured in newtons per coulomb (N/C). In this scenario, the strength of the electric field e is measured to be 8 N/C at a distance of 40 cm away from the charge q. Now, we need to determine the strength of the electric field at a distance of 80 cm away when the charge is reduced to 1/2q.
Firstly, we can use Coulomb's Law to determine the strength of the electric field created by the original charge q at a distance of 80 cm away. Coulomb's Law states that the strength of the electric field created by a charge is inversely proportional to the square of the distance from the charge. Therefore, we can use the following equation:
E = k*q/d^2
Where E is the electric field strength, k is the Coulomb's constant, q is the charge, and d is the distance from the charge.
Using the given values, we can calculate the strength of the electric field at a distance of 80 cm away:
E = (9 x 10^9 N*m^2/C^2) * q / (0.8 m)^2
E = (9 x 10^9 N*m^2/C^2) * q / 0.64 m^2
E = 14.06 * q N/C
Next, we need to take into account the fact that the charge has been reduced to 1/2q. The strength of the electric field is directly proportional to the charge, so if the charge is reduced to 1/2q, the strength of the electric field will also be reduced by half. Therefore, the final answer for the strength of the electric field at a distance of 80 cm away with a charge of 1/2q would be:
E = 7.03 N/C
In summary, the strength of the electric field created by a charge q at a distance of 80 cm away with a charge of 1/2q would be 7.03 N/C. This is calculated using Coulomb's Law and taking into account the reduction in charge.

To know more about electric field visit:
https://brainly.com/question/30544719
#SPJ11

The kinetic energy of the bowling ball is 115.32 J.

Kinetic energy is the energy of a moving body.

To calculate the kinetic energy of the bowling ball, we use the formula below

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Learn more about kinetic energy here: https://brainly.com/question/25959744

#SPJ1

Answer:

Explanation:266.5jjjj

Visible light, ultraviolet rays, and X-rays are all forms of electromagnetic radiation, with differences in their wavelengths, frequencies, and energies.

Visible light is the part of the electromagnetic spectrum that human eyes can perceive. It has a wavelength range of 400-700 nanometers, with violet having the shortest wavelength and red having the longest. Visible light can be refracted, reflected, and diffracted, and it can be split into its component colors using a prism.

Ultraviolet (UV) rays have shorter wavelengths and higher frequencies than visible light. They have wavelengths between 10-400 nanometers. UV radiation is classified as UVA, UVB, and UVC, with UVC having the shortest wavelength and highest energy. UV rays can cause damage to DNA and can cause sunburn and skin cancer.

X-rays have even shorter wavelengths and higher frequencies than UV rays. X-rays have wavelengths between 0.01-10 nanometers. They can penetrate through materials that visible light and UV radiation cannot, such as body tissues and bones, making them useful in medical imaging. X-rays are also produced in outer space and can be used to study the universe.

In summary, the main differences between these types of electromagnetic radiation are their wavelengths, frequencies, and energies, which determine their properties and potential applications.

To know more about X-rays click this link -

brainly.com/question/29861000

#SPJ11

Answer:

6 cm

Explanation:

When 4 cm from the mirror the image is 4 cm behind the mirror.  

When the mirror is moved 1 cm towards the man the man is now 3 cm from the mirror and his image is also 3 cm from the mirror.

Thus the distance between the man and his image is now 3+3 = 6 cm.

A change in the axon membrane potential from -70 mv to -90 mv would be termed as hyperpolarization.

Hyperpolarization occurs when the membrane potential becomes more negative than the resting potential. In this case, the membrane potential has decreased from -70 mv to -90 mv, indicating that the neuron has become more polarized or inhibited. The change in the membrane potential is caused by an increase in the permeability of the axon membrane to ions, which results in an efflux of positively charged ions, such as potassium, from the cell. This efflux of ions makes it more difficult for the neuron to reach its threshold potential and generate an action potential. Overall, hyperpolarization is an important physiological mechanism that allows neurons to maintain their resting potential and regulate their excitability.

To know more about mv visit:

https://brainly.com/question/30558635

#SPJ11