Answer:
2
Explanation:
Covalent bonding occurs when pairs of electrons are shared by atoms. Atoms will covalently bond with other atoms in order to gain more stability, which is gained by forming a full electron shell. By sharing their outer most (valence) electrons, atoms can fill up their outer electron shell and gain stability.
Answer:
To fill their valance shell and become stable!
Explanation:
What kind of reaction is this? *
Na + C1, → NaCl
Why are acids called proton donors?
please help. it’s my last question.
Given
Atomic symbol
Required
Atomic composition
Solution
Atomic number = number of protons = number of electrons
Mass Number (A) is the sum of protons and neutrons
Number of protons and Number of Neutrons in nucleus
Number of electrons in the shell
From the picture:
protons = 3
neutrons = 4
electrons = 3
atomic number = protons = electrons = 3
mass number = protons + neutrons = 3+4 = 7
A standard 10.00 g mass is weighed on an analytical balance 100 times. The average and standard deviation obtained gives 10.12 ± 0.03 g. A calibration service is called. After the balance is recalibrated, the new measurements show 10.00 ± 0.03 g. Did the recalibration result in improved accuracy or precision?
Answer:
There was an improvement in accuracy. There was no change in precision.
Explanation:
The average mass after recalibration is closer to the mass of the standard, so the recalibration improved the accuracy (the measurement is closer to an accepted 'true' value).
The standard deviation did not change, so the precision (or how disperse the measurements are) was not affected.
I need some help to determine the mole and grams pls I would really appreciate the help
Answer:
[tex]n_{FeS}=0.686molFeS \\\\n_{H_2S}=23.3gH_2S[/tex]
Explanation:
Hello!
In this case, according to the given chemical reaction, it is possible to apply the following stoichiometric setups in order to compute the moles of reacting FeS and the grams of produced H2S, given the mass of HCl (molar mass = 36.46 g/mol) as shown below:
[tex]n_{FeS}=50.0gHCl*\frac{1molHCl}{36.46gHCl}*\frac{1molFeS}{2molHCl}\\\\n_{FeS}=0.686molFeS \\\\\\m_{H_2S}=50.0gHCl*\frac{1molHCl}{36.46gHCl}*\frac{1molH_2S}{2molHCl}*\frac{34.04gH_2S}{1molH_2S} \\\\n_{H_2S}=23.3gH_2S[/tex]
Best regards!
Breathing equipment used by rescue workers needs to capture the CO2 the humans breath out and produce O2 for them to breath in, like a plant during photosynthesis. One compound capable of doing this is potassium superoxide (KO2), which produces the salt by-product potassium carbonate. What is the balanced chemical equation for this reaction? Don't include states of matter.
Answer: [tex]4KO_2+2CO_2\rightarrow 2K_2CO_3+3O_2[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced chemical equation for reaction of potassium superoxide with carbon dioxide to produce oxygen and potassium carbonate will be:
[tex]4KO_2+2CO_2\rightarrow 2K_2CO_3+3O_2[/tex]
There diagrams imply that’s
A TISSUEs are always rectangular
B tissues are made up of cells
C Tissues all look the same
D tissues have the same Function
Answer:
b
Explanation:
bsbsbsbbebensnnsjswjjejejejejek
12) How many moles of CO can be produced from
10.0 mol of CO2
Answer:
5
Explanation:
There are 2 moles of CO in each CO2. 10 ÷ 2 = 5
explain how the particles of a substance change as a substance changes from a solid to a liquid to a gas.
Answer:
Some substances can change from the solid state to the gas state without ever becoming a liquid. During this process, known as sublimation, the sur- face particles of the solid gain enough energy to become a gas.When dry ice becomes a gas, it absorbs thermal energy from water vapor in the air.
Explanation:
How many moles of hydrogen atoms are in 0.213 moles of C6H1804
Answer: 3.834
Explanation: 18*0.213
The orbit closest to the nucleus has ___________ energy.
Answer:
inonic bonds with cavalent bonds
Explanation:
ionic bonds
PLEASE HELPPP!!! Calculate the mass (in grams) of lithium hydroxide that would be needed to produce 8.03 mol of
lithium sulfate in the reaction below.
2 LIOH + H2S04 -> Li2SO4 + 2 H20
Answer:
385g LiOH
Explanation:
Assuming the equation is balanced...
(8.03 mol Li2SO4) x (2 LiOH/ 1 Li2SO4)
= 16.1 mol LiOH ;
16.1 mol LiOH x (24g LiOH/ 1 mole LiOH) = 385g LiOH
The number of moles of LiOH needed to produce 8.03 moles is 16.06 moles. One mole of LiOH weighs, 23 g/mol. Hence, 16.06 moles weighs, 369.3 g.
What is lithium sulphate ?Lithium sulphate is an ionic compound formed by the donation of electron from the lithium metal to the sulphate group. It is formed by the reaction of lithium hydroxide with sulphuric acid.
As per the given balanced chemical equation of the reaction, the 2 moles of lithium hydroxide LiOH gives one mole of lithium sulphate. Then, number of moles of LiOH needed to give 8.03 mol of the product is:
2 × 8.03 = 16.06 mol.
Molar mass of LiOH = 23 g/mol.
mass of 16.06 moles of LiOH = 23 ×16.06 = 369.3 g.
Therefore, the required mass LiOH is 369.3 g.
Find more on LiOH:
https://brainly.com/question/16251002
#SPJ6
How does latitude affect water temperature? Choose ALL that apply Lesson 2.05 none of the choices Temperatures are greatest at low altitudes because of the proximity to the equator As you move to higher latitudes approaching the poles, the temperature decreases. Temperatures are lowest at low altitudes because of the proximity to the equator
Answer:
I think it's option 3 (From top to bottom)
Explanation:
When the water is at a higher altitude there's only about 40 percent heat that the equator does.
A mixture of cyclopropane (C3H6) and oxygen (O2) is sometimes used as a general anesthetic. In a mixture, the partial pressures of cyclopropane and oxygen are 170. torr and 570. torr, respectively. Calculate the ratio of the moles of oxygen to the moles of cyclopropane in the mixture.
Answer:
0.30
Explanation:
Provided that the volume and pressure remains constant
[(Pressure of cyclopropane)/ (Pressure of Oxygen)] = [(no. Of moles of cyclopropane)/(no. Of moles of Oxygen)]
Pressure of cyclopropane= 170. torr
Pressure of Oxygen= 570. torr
If we substitute the values
[(no. Of moles of cyclopropane)/(no. Of moles of Oxygen)] = 170/570
[(no. Of moles of cyclopropane)/(no. Of moles of Oxygen)] = 0.30
Hence, the ratio of the moles of oxygen to the moles of cyclopropane in the mixture is 0.30
what can affect the reaction RATE but not the rate constant?
Answer/Explanation:
The rate of a reaction depends on the rate constant and concentration the rate constant according to Arrhenius is as u stated. An increase in temperature increases the rate constant and hence the rate. An increase in concentration increases the rate but not the rate constant.
20 g of Allg is dissolved in water to produce a solution with a concentration of 2.007M. What is the volume of this solution in milliliters?
Answer:
369 ml
Explanation:
Mass of Aluminium (Al) = 20 g
Molar concentration = 2.007M
Molar concentration = Number of moles / Volume
The relationship between mass and number of moles;
Number of moles = Mass / Molar mass
Number of moles = 20 / 27 = 0.741 mol
2.007 = 0.741 / Volume
Volume = 0.741 / 2.007 = 0.369 L
converting to millilitres by multiplying by 1000
Volume = 0.369 * 1000 = 369 ml
Indicate the electron pair geometry and the molecular geometry for each of the six compounds. Compound Electron pair geometry Molecular geometry CO 2 CO2 linear linear BF 3 BF3 SO 2 SO2 trigonal planar bent SiCl 4 SiCl4 tetrahedral tetrahedral PF 3 PF3 tetrahedral trigonal pyramidal OF 2 OF2 tetrahedral bent
Answer:
CO2
Electron pair geometry- Linear
Molecular geometry- Linear
BF3
Electron pair geometry - Trigonal planar
Molecular geometry- trigonal planar
SO2
Electron geometry - Trigonal planar
Molecular geometry - bent
SiCl4
Electron geometry- tetrahedral
Molecular geometry - tetrahedral
PF3
Electron pair geometry - tetrahedral
Molecular geometry- trigonal pyramidal
OF2
Electron pair geometry- tetrahedral
Molecular geometry- bent
Explanation:
Considering the molecule CO2, there are two regions of electron density in the molecule positioned at an angle of 180 degrees from each other hence the molecule is linear.
For BF3, the three bond pairs are arranged at the corners of a triangle to give a trigonal planar geometry at a bond angle of 120 degrees.
SO2 has two bonding groups and one lone pair giving three regions of electron density and a trigonal planar electron pair geometry. Due to the distortion to geometry caused by the presence of a lone pair, the molecule is bent.
For SiCl4, the four bonding groups are arranged at the corners of a regular tetrahedron hence it is tetrahedral both in electron pair geometry and in molecular geometry.
PF3 molecule has four regions of electron density corresponding to tetrahedral electron pair geometry. The presence of the lone pair leads to a trigonal pyramidal molecular geometry.
For OF2, there are four regions of electron density around the central oxygen atom. Two bond pairs and two lone pairs leads to a tetrahedral electron pair geometry but a bent molecular geometry is observed due to the two lone pairs.
(ILL GIVE BREAINLIEST!! ) Which process(es) has steps called prophase, metaphase, anaphase, and telophase?
meiosis and mitosis
mitosis and fertilization
fertilization only
meiosis only
Answer:
mitosis and fertilization is a required answer.
Answer:
meiosis and mitosis
Explanation:
the difference is that meiosis goes through it twice.
A chemist carefully measures the amount of heat needed to raise the temperature of a 894.0g sample of a pure substance from to −5.8°C to 17.5°C. The experiment shows that 4.90kJ of heat are needed. What can the chemist report for the specific heat capacity of the substance?
Answer:
C = 0.2349 J/ (g °C)
Explanation:
Mass, m = 894.0g
Initial Temperature = −5.8°C
Final Temperature = 17.5°C
Temperature change = 17.5°C - (−5.8°C) = 23.3
Heat, H = 4.90kJ = 4900 J
Specific heat capacit, C = ?
The relationship between these quantities is given by the equation;
H = mCΔT
C = H / mΔT
C = 4900 / (894)(23.3)
C = 0.2349 J/ (g °C)
Fill in the coefficient needed to make the equation balanced.
1. _______ Na + Cl2 → ______NaCl
a. 2, 2
b. 2, 3
c. 2, 1
d. 2, 4
2. _______Al + _______S → Al2S3
a. 2, 2
b. 2, 3
c. 2, 4
d. 2, 6
3. ______ H2 + O2 → ______H2O
A. 2, 2
b. 2, 3
c. 2, 4
d. 2, 8
4. _______Fe + ______O2 → ______Fe2O3
a. 4, 2, 2
b. 4, 2, 1
c. 4, 3, 2
d. 4, 3, 1
Answer:
1 a
2 b
3 a
4. c
Explanation:
Help pls!!!!!!!!!!!!!!!!!!!!!!!!!
Chief Keef - Love Sosa
Police investigating the scene of a sexual assault recover a large blanket that they believe may contain useful physical evidence. They take it to the laboratory of forensic serologist Scott Alden, asking him to test it for the presence of semen. Noticing faint pink stains on the blanket, Scott asks the investigating detective if he is aware of anything that might recently have been spilled on the blanket. The detective reports that an overturned bowl of grapes and watermelon was found at the scene, as well as a broken glass that had contained wine. After the detective departs, Scott chooses and administers what he considers the best test for analysing the piece of evidence in his possession. Three minutes after completion of the test, the blanket shows a positive reaction. What test did Scott choose, and what was his conclusion? Explain your answer.
Answer:
Acid Phosphatase (AP) Test
Explanation:
Acid phosphate is an enzyme that is found in the body. It is secreted majorly by the prostrate gland into the seminal fluid. The acid phosphatase test is used to test for the presence of semen in items.
Scott chose the acid phosphatase test because it is very useful in testing for semen on large items such as blankets. The reaction time for an acid phosphatase test for semen is less than 30 seconds. Seeing that the test was completed in three minutes, Scott concluded that the positive reaction was as a result of some other fluid.
The detectives reported that an overturned bowl of grapes and watermelon was found at the scene as well as a broken glass that had contained wine. Scott knew that some fruit juices like that of watermelon give a positive reaction to the acid phosphatase test but with more time that of the semen fluid because the reaction is a very slow one.
Scott concluded that there was no presence of semen on the blanket and therefore there was no sexual assault.
Density of water calculation using a 10 mL graduated cylinder
10 mL graduated cylinder + 10 mL unknown liquid (g) 10 mL graduated cylinder (g) Volume of liquid (mL) Density (g/mL)
Trial 1 19.731 9.861 10.0
Trial 2 19.831 9.861 10.0
Trial 3 19.831 9.861 10.0
Trial 4 19.771 9.861 10.0
Trial 5 19.751 9.861 10.0
Required:
Calculate the average density for the gradudated cylinder measurements.
Answer:
Average density of the liquid = 0.992 g/mL
Explanation:
Density = mass/volume
mass of liquid = (mass of liquid + mass of cylinder) - mass of cylinder
Trial 1: mass of liquid = 19.731 - 9.861 = 9.87
volume of liquid = 10 mL
density of liquid = 9.87 g / 10 mL = 0.987 g/mL
Trial 2: mass of liquid = 19.831 - 9.861 = 9.97
volume of liquid = 10 mL
density of liquid = 9.97 g / 10 mL = 0.997 g/mL
Trial 3: mass of liquid = 19.831 - 9.861 = 9.97
volume of liquid = 10 mL
density of liquid = 9.97 g / 10 mL = 0.997 g/mL
Trial 4: mass of liquid = 19.771 - 9.861 = 9.91
volume of liquid = 10 mL
density of liquid = 9.91 g / 10 mL = 0.991 g/mL
Trial 5: mass of liquid = 19.751 - 9.861 = 9.89
volume of liquid = 10 mL
density of liquid = 9.89 g / 10 mL = 0.989 g/mL
Average density = (0.987 + 0.997 + 0.997 + 0.991 + 0.989)/5 = 4.961/5
Average density of the liquid = 0.992 g/mL
Which example is a long-term environmental change?
O La Niña
O EI Nino
O climate change
O small asteroid impact
C
Part A
Summarize your research, and describe the attributes of the savanna.
Answer:
Savanna regions have two distinct seasons - a wet season and a dry season. There is very little rain in the dry season. In the wet season vegetation grows, including lush green grasses and wooded areas.
Savannas are grasslands found in Africa, Australia, South America, and India. The climate is warm or hot. Savannas experience both dry and rainy seasons. Each year, savannas receive about 20 to 50 inches of rain in a span of six to eight months. The other months are dryer. There’s also a threat of wildfires because of the severe dryness during these months. Grasslands are true to their name because their vegetation is mostly grass. Savannas are home to a wide range of animals, including different species of beetles and insects, which many creatures consume. Squirrels, mice, elephants, gazelles, and antelopes are the plant-eating animals that live in the savanna. Hyenas, lions, and leopards are some of the meat-eating animals in these areas. Some of the nonliving components of the system include very porous soil that allows water to drain easily.
how many moles are in a 25.0 grams of carbon dioxide
answer:44.0095
Explanation:
sana makatulong
Answer:
44.0095
Explanation:
We assume you are converting between grams CO2 and mole. You can view more details on each measurement unit: molecular weight of CO2 or mol This compound is also known as Carbon Dioxide. The SI base unit for amount of substance is the mole.
Did i answer these right??
5.6 g of Iron reacts with excess fluorine gas.
The mass of iron fluoride produced is 11.3 g
What is the formula of the iron fluoride?
Answer: FeF3 Iron(III) fluoride
Explanation: 5.6 g = 1/10 mole Fe
11.3-5.6g F = 5.7 = 3/10 mole F
(30 POINTS) Which order shows the levels of organization from largest to smallest?
organism, organ system, cell, organ, tissue
organism, tissue, organ system, organ, cell
organism, organ, organ system, cell, tissue
organism, organ system, organ, tissue, cell
Answer:
cell,tissue,organ,organ system,organism
A sample of iron, which has a specific heat capacity of 0.449 Jg^-1℃^-1, is put into a calorimeter (see sketch at right) that contains 100.0 g of water. The iron sample starts off at container 93.3 °C and the temperature of the water starts off at 22.0 °C. When the temperature of the water stops changing it's 25.7 °C. The pressure remains constant at 1 atm.
Required:
Calculate the mass of the iron sample. Be sure your answer is rounded to 2 significant digits.
Answer:
[tex]m_{iron}=32.1g[/tex]
Explanation:
Hello!
In this case, since the interaction between hot iron and cold water allows the heat transfer from iron to water and therefore we can write up the following energetic equation:
[tex]Q_{iron}+Q_{water}=0[/tex]
Whereas the heat terms can be written in terms of mass, specific heat and temperature change:
[tex]m_{iron}C_{iron}(T_f-T_{iron}) + m_{water}C_{water}(T_f-T_{water}) = 0[/tex]
So we solve for the mass of iron as follows:
[tex]m_{iron} = \frac{m_{water}C_{water}(T_f-T_{water})}{C_{iron}(T_f-T_{iron}) }[/tex]
Now, we plug in the given data to obtain:
[tex]m_{iron} = \frac{-100g*0.449\frac{J}{g\°C} (25.7\°C-22.0\°C)}{0.449\frac{J}{g\°C} (25.7\°C-93.3\°C) }[/tex]
[tex]m_{iron}=32.1g[/tex]
Best regards!
