The FORTRAN program that performs Gaussian elimination and back substitution WITHOUT partial pivoting is given below. In this program, we first input the size of the matrix, N. We then allocate memory to the Nx (N+1) floating-point matrix using a random number generator.
We perform Gaussian elimination and back substitution on the matrix. Finally, we output the runtime of the program.PROGRAM gaussian_elimination! Setup! Each program will take a single input, the size of the Matrix, N.INTEGER :: N, I, J, KREAL :: A(N,N+1), X(N), SUM, FACTOR, TIME1, TIME2WRITE (*,*) '
Start the clock! TIME1 = CPU_TIME()! Perform Gaussian elimination and back substitution on the MatrixDO K
= 1, N-1DO I = K+1, NFACTOR
= A(I,K)/A(K,K)DO J
= K+1, N+1A(I,J)
= A(I,J) - FACTOR*A(K,J)ENDDOENDDODONE DO X(N)
= A(N,N+1)/A(N,N)DO K
= N-1, 1, -1SUM = 0DO J
= K+1, NX(J)*A(K,J)ENDDOSUM
= A(K,N+1) - SUMX(K)
= SUM/A(K,K)ENDDO!
Take the stop time! TIME2 = CPU_TIME()WRITE (*,*) 'Runtime: ', TIME2-TIME1END PROGRAM gaussian_eliminationNote: The program assumes that the matrix is diagonally dominant, otherwise, it may fail.
To know more about FORTRAN program visit :
https://brainly.com/question/33208564
#SPJ11
Save all the commands for the following steps in your script file. Separate and label different steps using comments. Unless otherwise specified, do NOT suppress MATLAB's output. Create the following two matrices: A= ⎣
⎡
5
1
−4
−3
0
8
7
−6
9
⎦
⎤
B= ⎣
⎡
3
6
4
2
8
4
−1
−7
0
⎦
⎤
Use the matrices A and B to answer the following: a) Calculate A ∗
B and B ∗
A. Does A ∗
B=B∗A ? b) Calculate (B ∗
C) −1
and B −1∗
C −1
. Does (B ∗
C) −1
=B −1∗
C −1
? c) Calculate (A+B) ′
and A ′
+B ′
. Does (A+B) ′
=A ′
+B ′
? d) Calculate (A −1
) ′
and (A ′
) −1
. Does (A −1
) ′
=(A ′
) −1
?
To perform the given calculations using the matrices A and B in MATLAB, save the commands in a script file and follow the specified steps.
To calculate the matrix products A * B and B * A, we can use the matrix multiplication operator "*" in MATLAB. These calculations yield two different matrices, and to check if A * B is equal to B * A, we compare the matrices using the "==" operator.
For the calculations [tex](B * C)^-^1[/tex] and [tex]B^-^1 * C^-^1[/tex], we need to first define the matrix C. The inverse of a matrix can be obtained using the "inv()" function in MATLAB. Then, we perform the matrix multiplications and compare the results to check for equality.
To calculate (A + B)' and A' + B', we use the transpose operator "'" in MATLAB to find the transpose of each matrix. Then, we compare the transposed matrices to determine if they are equal.
Lastly, to calculate [tex](A^-^1)'[/tex]and [tex](A')^-^1,[/tex] we need to compute the inverse of matrix A using the "inv()" function. We then take the transpose of [tex](A^-^1)[/tex]and (A') and compare them to check for equality.
By saving these commands in a script file and executing them in MATLAB, we can obtain the answers to the given questions and determine if the specified matrix operations yield equal results.
Learn more about script file
#SPJ11
brainly.com/question/12968449
Study the scenario and complete the question(s) that follow: A process A may request use of, and be granted control of, a particular a printer device. Before the printing of 5000 pages of this process, it is then suspended because another process C want to print 1000 copies of test. At the same time, another process C has been launched to print 1000 pages of a book. It is then undesirable for the Operating system to simply to lock the channel and prevent its use by other processes; The printer remains unused by all the processes during the remaining time. Source: Mplana. LA 2022 Question 4 4.1 What is the name of the situation by which the OS is unable to resolve the dispute of different processes to use the printer and therefore the printer remain unused. (3 Marks) 4.2 Processes interact to each other based on the degree to which they are aware of each other's existence. Differentiate the three possible degrees of awareness and the consequences of each between processes (12 Marks) 4.3 Explain how the above scenario can lead to a control problem of starvation. (5 Marks) 4.4 The problem in the above scenario can be solve by ensuring mutual exclusion. Discuss the requirements of mutual exclusion.
The name of the situation where the OS is unable to resolve the dispute of different processes to use the printer, resulting in the printer remaining unused, is resource contention.
What are the three possible degrees of awareness between processes, and what are the consequences of each?How can the above scenario lead to a control problem of starvation?What are the requirements of mutual exclusion to solve the problem in the above scenario?The three possible degrees of awareness between processes are:
No Awareness: In this degree of awareness, processes have no knowledge of each other's existence. They operate independently without any communication or coordination. The consequences of this lack of awareness include potential conflicts when multiple processes compete for the same resource, inefficient resource utilization, and difficulty in resolving conflicts or sharing information.
Indirect Awareness: Processes in this degree of awareness are aware of the existence of other processes through the operating system or shared resources. They can communicate and coordinate their actions indirectly, using mechanisms such as message passing or synchronization primitives provided by the OS. However, the level of information exchanged may be limited, leading to potential delays, suboptimal decision-making, and difficulties in resolving conflicts.
Direct Awareness: Processes with direct awareness have full knowledge of each other's existence and state. They can communicate directly and share information about their current status and resource requirements. This high degree of awareness enables efficient collaboration, effective resource allocation, and improved system performance. Processes can coordinate their actions, synchronize access to shared resources, and avoid conflicts or contention.
The consequences of direct awareness include better resource utilization, reduced contention, faster resolution of conflicts, and improved coordination among processes.
In the given scenario, the control problem of starvation can arise due to the monopolization of the printer device by process C. As process C repeatedly requests the printer, process A, which initially had control over the printer, remains suspended indefinitely. This leads to a situation where process A is denied access to the printer resource, resulting in resource starvation.
To solve the problem described in the scenario and prevent resource contention, mutual exclusion is required. Mutual exclusion is a technique used to ensure that only one process can access a shared resource at any given time. The requirements for achieving mutual exclusion include:
Exclusive Access: Only one process can have exclusive access to the printer device at a time. This ensures that conflicting requests are avoided, and the printer is not simultaneously used by multiple processes. Mutual exclusion guarantees that a resource is not shared concurrently among multiple processes.
2. Indefinite Hold and Wait: A process requesting access to the printer must wait until it can acquire the resource. However, the waiting process should not hold any resources that may be required by other processes. This prevents unnecessary delays or deadlocks where processes are unable to proceed due to resource dependencies.
No Preemption: . Once a process acquires the printer, it retains control until it completes its task. Preempting or forcibly terminating a process's access can lead to data inconsistency or undesired system behavior. Mutual exclusion ensures that a process can finish its operation before releasing the resource for other processes.
Non-Busy Waiting: Processes should not engage in active waiting, continuously checking for resource availability. Instead, they should be able to wait passively, allowing other processes to utilize system resources efficiently. This reduces unnecessary CPU usage and improves overall system performance.
Learn more about starvation
brainly.com/question/30714864
#SPJ11
Write a recursive function for the following problem: - "Finding n th Fibonacci number using recursion" int find_Fib(int n ) \{ //fill in your code here \}
Here's the code of recursive function:
int find_Fib(int n) {if (n == 0 || n == 1) {return n;}else {return find_Fib(n - 1) + find_Fib(n - 2);}}
This function will keep calling itself recursively until it reaches the base case (n == 0 or n == 1), at which point it will return the correct Fibonacci number
To write a recursive function for finding the nth Fibonacci number, you can follow these steps:
1: Define a function named find_Fib that takes an integer parameter named n. This parameter represents the index of the Fibonacci number you want to find.
2: Check if n is equal to 0 or 1. If it is, return n because the 0th and 1st Fibonacci numbers are both equal to their indices.
3: If n is greater than 1, call the find_Fib function recursively with n - 1 and n - 2 as the arguments. Then add the results of these recursive calls together to get the nth Fibonacci number.
Learn more about recursive function at
https://brainly.com/question/33638441
#SPJ11
the __________ api provides two new ways to store information on the client side: local storage and session storage.
The Web Storage API provides two new ways to store information on the client side: Local Storage and Session Storage.
An API (Application Programming Interface) is a set of protocols, routines, and tools for constructing software and applications. An API specifies how software components should communicate with one another. APIs are used by developers to access functionality without having to develop everything themselves.
Web Storage API: Local storage and session storage are two ways to store data in web applications. These two mechanisms are used by the Web Storage API. The Web Storage API includes the StorageEvent object, which allows applications to register for notifications when local storage changes.
Local Storage: It provides persistent storage that is accessible even after the browser window has been closed. Local storage is best suited for storing large amounts of data that do not require frequent access.
Session Storage:It provides storage that is only accessible to the window or tab that created it. Once the browser window or tab is closed, session storage is deleted. Session storage is ideal for storing user data and other frequently accessed data.Thus, we can conclude that the Web Storage API provides two new ways to store information on the client side: Local Storage and Session Storage.
More on Web Storage API: https://brainly.com/question/29352683
#SPJ11
c++ oop programme. Write program using function to print Sum=2/2+4/2+8/2+. n/2?
The following is the , an explanation for the c++ oop program using a function to print the given expression: Sum=2/2+4/2+8/2+.
ReturnType Function Name (Argument Type Argument Name) { // Body of the function }To print the sum of the given expression, a function named `sum` can be used. The function takes in a single integer argument, `n`. The function `sum` then calculates the expression, Sum=2/2+4/2+8/2+.
n/2, using a for loop and returns the result as an integer value. The `sum` function takes an integer argument `n` and calculates the sum of the given expression using a for loop. The loop starts from `i = 1` and doubles the value of `i` in each iteration until `i` is less than or equal to `n`. In each iteration, the value of `i/2` is added to the `result`. Finally, the `result` is returned by the function.
To know more about program visit:
https://brainly.com/question/33626941
#SPJ11
Make an abstract class called Shape. It will have two private attributes called shapeName and shapeColor of type String. Must have default and parameter constructor. Do getter and setter for attributes. Make an abstract method called area that will return a double and another called askNumbers of type void.
An abstract class called Shape has been created with private attributes shapeName and shapeColor of type String. It includes a default and parameter constructor, along with getter and setter methods for the attributes. Additionally, it has an abstract method called area that returns a double and another abstract method called askNumbers of type void.
How can we create an abstract class called Shape with private attributes and necessary methods?To create the abstract class Shape, we define it with the private attributes shapeName and shapeColor of type String.
These attributes are encapsulated and can be accessed through getter and setter methods.
The class includes a default constructor and a parameter constructor to initialize the attributes.
Furthermore, we declare an abstract method called area that returns a double, allowing each subclass to provide its own implementation of calculating the area.
Another abstract method, askNumbers, is defined as void, indicating that it does not return any value.
Learn more about abstract method
brainly.com/question/30752192
#SPJ11
Loop: LW R4, 0(R8); Read data from RAM and load to R4, RAM address is calculated by adding 0 to the content of R 8 LW R5, 0(R9) ADD R6, R4, R5 SW R6, O(R9) adding 0 to the content of R9 ADDI R8, R8, 8 ADDI R9, R9,8 ADDI R3, R3,-1 BNE R3, R0, Loop ; Load R5 = Memory(R9) ;R6=R4+R5; Store the content of R6 to RAM, RAM address is calculated by ;R8=R8+8;R9=R9+8;R3=R3−1; Branch if (R3 not equal to 0) Assume that the initial value of R3 is 1000 . Show the timing of a loop iterate on a 5 -stage pipeline. Start at the LW instruction and terminate at the same LW instruction after one loop iterate (the LW instruction should be shown a second time after the BNE instruction). The pipeline stalls on a data hazard, and the data cannot be read until it is written back into the register file. The branch delay is 2 stall cycles for a taken branch. How many clock cycles do this loop take for all iterations and what is the average CPI?
Number of instructions executed for all iterations = 8 * 1000 = 8000
The average CPI = 1.25
How to solveAssuming a 5-stage pipeline with data hazards and branch delay of 2 stall cycles for a taken branch, let's analyze the given loop:
LW R4, 0(R8): This instruction reads data from RAM and loads it into R4. The pipeline stalls until the data is available, resulting in a total of 1 clock cycle.
LW R5, 0(R9): Similar to the previous instruction, this instruction reads data from RAM and loads it into R5. The pipeline stalls until the data is available, resulting in a total of 1 clock cycle.
ADD R6, R4, R5: This instruction adds the contents of R4 and R5 and stores the result in R6. It does not have any data hazards, so it can proceed without stalling. It takes 1 clock cycle.
SW R6, 0(R9): This instruction stores the contents of R6 into RAM. Since the value of R9 is calculated from a previous instruction, there is a data hazard. The pipeline stalls until the value of R9 is available, resulting in a total of 1 clock cycle.
ADDI R8, R8, 8: This instruction adds 8 to the contents of R8. It does not have any data hazards, so it can proceed without stalling. It takes 1 clock cycle.
ADDI R9, R9, 8: Similar to the previous instruction, this instruction adds 8 to the contents of R9. It does not have any data hazards, so it can proceed without stalling. It takes 1 clock cycle.
ADDI R3, R3, -1: This instruction subtracts 1 from the contents of R3. It does not have any data hazards, so it can proceed without stalling. It takes 1 clock cycle.
BNE R3, R0, Loop: This branch instruction compares the contents of R3 with R0 and branches if they are not equal. There is a branch delay of 2 stall cycles, so it takes a total of 3 clock cycles.
The total number of clock cycles for one iteration of the loop is: 1 + 1 + 1 + 1 + 1 + 1 + 1 + 3 = 10 clock cycles.
Since the initial value of R3 is 1000 and the loop iterates until R3 is not equal to 0, the loop will have 1000 iterations.
Therefore, the total number of clock cycles for all iterations of the loop is: 10 * 1000 = 10,000 clock cycles.
To calculate the average CPI (Cycles Per Instruction), we need to divide the total number of clock cycles by the number of instructions executed:
Number of instructions executed in one iteration = 8 (LW, LW, ADD, SW, ADDI, ADDI, ADDI, BNE)
Number of instructions executed for all iterations = 8 * 1000 = 8000
Average CPI = Total number of clock cycles / Number of instructions executed
Average CPI = 10,000 / 8000 = 1.25
Read more about clock cycles here:
https://brainly.com/question/31588467
#SPJ4
NTFS is a journaled system. True False Question 2 What is the name of the NTFS master file table meta file? The sector-size for the majority of single storage device, specifically an HDD, is 512 bytes per Sector. True False Question 4 Select all of the Parts of a FAT disk. Boot Sector File Allocation Table 1 Recycle Bin File Allocation Table 2 Read Folder Data Area Select all valid FAT File System types FAT12 FAT64 FAT16 FAT24 FAT32
NTFS is a journaled system and the majority of single storage devices have a sector size of 512 bytes per sector.
What is the name of the NTFS master file table meta file?NTFS (New Technology File System) is a proprietary file system developed by Microsoft for Windows NT and later versions. It is a journaled file system, which means that it records the changes made to files and directories in a journal before actually committing them to the disk.
This helps to minimize the risk of data loss or corruption in case of unexpected power loss or system crashes.
The NTFS master file table (MFT) is a database that stores information about every file and directory on an NTFS volume. It is located at the beginning of the volume and typically takes up 12.5% of the total volume size. The name of the NTFS MFT meta file is $MFT.
Sector Size:
The sector size for the majority of single storage devices, specifically an HDD, is 512 bytes per sector. This means that the disk is divided into small units of 512 bytes each, which can be accessed individually by the operating system or other software.
Parts of a FAT Disk:
Select all of the parts of a FAT disk.
The parts of a FAT disk include the following:
Boot sector: The first sector of the disk that contains information about the file system, such as the file system type, number of sectors per cluster, and number of FATs.
File Allocation Table (FAT): A table that contains information about the location of files and directories on the disk. There are two copies of the FAT in every FAT file system.
Recycle Bin: A folder where d files are initially stored before they are permanently d.
-Data area: The area on the disk where files and directories are stored.
Valid FAT File System Types:
Select all valid FAT file system types.
The valid FAT file system types include the following:
FAT12: A file system used on floppy disks and early hard drives with a capacity of up to 32 MB.
FAT16: A file system used on modern hard drives with a capacity of up to 2 GB.
FAT24: A variation of FAT16 that allows for larger hard drives with a capacity of up to 4 GB.
FAT32: A file system used on modern hard drives with a capacity of up to 2 TB.
FAT64: Not a valid FAT file system type.
Learn more about NTFS
brainly.com/question/32248763
#SPJ11
Complete this problem by defining two string variables named empty and greeting. Store the word Hello in greeting and store the empty string in empty. strings.cpp 1 #include 2 #include ... 3 using namespace std; int main() \{ ⋯ cout ≪ greeting ≪ empty ≪ "!" ≪ endl; cout ≪ "Expected: Hello!" ≪ endl; return θ;
Here's the completed C++ code with the string variables defined as requested:
#include <iostream>
#include <string>
using namespace std;
int main() {
string empty = "";
string greeting = "Hello";
cout << greeting << empty << "!" << endl;
cout << "Expected: Hello!" << endl;
return 0;
}
In this code, we include the necessary libraries, `iostream` and `string`, to work with strings.
Then, we define two string variables `empty` and `greeting` and assign them the respective values requested.
Finally, we print the concatenated values of `greeting`, `empty`, and `"!"` using the `<<` operator, followed by a newline `endl`. We also print the expected output for comparison.
To know more about C++, visit:
https://brainly.com/question/33180199
#SPJ11
what does excel return when your match() function uses an exact match option and searches for an item that is not part of the lookup array or lookup vector?
The MATCH() function, with an exact match option, returns the #N/A error value when searching for an item that is not part of the lookup array or lookup vector.
What happens when the MATCH() function searches for a non-existent item?When the MATCH() function is used with an exact match option (indicated by the value "0" or "FALSE" as the third argument), and it searches for an item that is not present in the lookup array or lookup vector, it returns the #N/A error value. The #N/A error signifies that the item being searched for could not be found.
This error can occur when the lookup value does not match any of the values in the specified array or vector. It is important to note that the exact match option requires an exact match for the item being searched. Even a slight difference in the value, such as case sensitivity or leading/trailing spaces, can cause the function to return the #N/A error.
Learn more about: function
brainly.com/question/30721594
#SPJ11
I ONLY NEED THE UML DIAGRAMS! IF IT IS THE SAME EXPERT THAT SAYS "I will be updating my answer soon" YOU WILL BE REPORTED! thank you :)
Consider developing software for a basic stopwatch that displays the passage of time. The
maximum duration for time is 60 minutes and 0 seconds. The program for the stopwatch has three
operations. They are for starting, pausing, and resetting the time. Suppose the stopwatch has three
buttons. They are Start (stating operation), Pause (pausing operation), and Reset (reset operation). If
the stopwatch is stopped, pressing the Start button causes the time to increase. If the stopwatch is
progressing, pressing the "Pause" button causes the time to stop immediately. If the "Reset" button is
pressed, the time is set to 0. The time is always shown on the stopwatch’s display
i) Create a UML class diagram for the stopwatch based on the description provided
above.
To create a UML class diagram for the stopwatch, we would have a "Stopwatch" class with three operations: start(), pause(), and reset(). The class would also have three buttons: Start, Pause, and Reset, which would trigger the corresponding operations.
The UML class diagram for the stopwatch would consist of a single class named "Stopwatch." This class represents the stopwatch entity and encapsulates its behavior and attributes. The class would have three operations: start(), pause(), and reset(), corresponding to the three buttons on the stopwatch.
The start() operation would be responsible for starting the stopwatch and increasing the time displayed. It would be invoked when the Start button is pressed. The pause() operation would immediately stop the stopwatch's progress and freeze the displayed time. It would be triggered by pressing the Pause button. The reset() operation would set the time back to zero and clear the display. It would be activated by pressing the Reset button.
The stopwatch's display would be represented by an attribute, such as "time," which indicates the current elapsed time. This attribute would be updated by the start() operation and cleared by the reset() operation.
Overall, the UML class diagram for the stopwatch would include a single class named "Stopwatch" with three operations (start(), pause(), and reset()) and an attribute to represent the time displayed on the stopwatch.
Learn more about Stopwatch
brainly.com/question/623971
#SPJ11
What is the worst case number of swaps that selection sort will do when sorting a list of 10 keys?
The worst-case number of swaps that selection sort will do when sorting a list of 10 keys is 45 swaps.
What is selection sort?Selection sort is a basic sorting algorithm that in every pass chooses the minimum value from the unsorted set and exchanges it with the element at the starting point of the unsorted set.
The next pass then commences with the next unsorted element and goes on until the last element has been included. At the conclusion of this process, the whole array is sorted.In other words, Selection sort is the simplest sorting algorithm.
It sorts an array by repeatedly choosing the minimum element (considering ascending order) from the unsorted array and putting it at the beginning. The algorithm maintains two subarrays in a given array, the sorted subarray and the unsorted subarray. The subarray that is sorted is located at the beginning of the array.
Learn more about array at
https://brainly.com/question/33362725
#SPJ11
Write a program that asks the user to enter the name of his or her first name and last name (use two variables). The program should display the following: The number of characters in the first name The last name in all uppercase letters The first name in all lowercase letters The first character in the first name, and the last character in the last name -in uppercase. (eg. Juan Smith would be JH) 2. Write a program that asks the user for the number of males and the number of females registered in a class. The program should display the percentage of males and females in the class - in two decimal places. (There should be two inputs and two outputs.)
The provided programs gather user input, perform calculations, and display relevant information. The first program analyzes the user's name, while the second calculates and presents the percentage of males and females in a class.
Here's the program that fulfills the requirements for both scenarios:
Program to display information about the user's name:
first_name = input("Enter your first name: ")
last_name = input("Enter your last name: ")
print("Number of characters in the first name:", len(first_name))
print("Last name in uppercase:", last_name.upper())
print("First name in lowercase:", first_name.lower())
print("First character of first name and last character of last name in uppercase:",
first_name[0].upper() + last_name[-1].upper())
Program to calculate and display the percentage of males and females in a class:
males = int(input("Enter the number of males: "))
females = int(input("Enter the number of females: "))
total_students = males + females
male_percentage = (males / total_students) * 100
female_percentage = (females / total_students) * 100
print("Percentage of males: {:.2f}%".format(male_percentage))
print("Percentage of females: {:.2f}%".format(female_percentage))
These programs prompt the user for input, perform the necessary calculations, and display the desired outputs based on the given requirements.
Learn more about programs : brainly.com/question/26789430
#SPJ11
In which of the following circumstances the query optimiser would likely choose index scan over fulltable scan? when the query condition is highly selective when the most of the rows would satisfy the query condition when the query has an ORDER BY clause none of these cases In all of these cases
The query optimizer would likely choose index scan over a full table scan when the query condition is highly selective.
This is because an index scan can quickly locate the desired rows based on the selectivity of the query condition. The selectivity of the query condition refers to the number of rows that satisfy the condition as a proportion of the total number of rows in the table.
When the query condition is highly selective, the optimizer would choose an index scan because it would be faster than scanning the entire table. In an index scan, the optimizer uses the index to locate the required data, which saves time and resources.
An index scan is typically used when a small subset of the data needs to be retrieved, as opposed to a full table scan, which scans the entire table, even if most of the rows would not satisfy the query condition. Therefore, the correct option is "when the query condition is highly selective."
Learn more about query at
https://brainly.com/question/32073018
#SPJ11
Determine the decimal and hexadecimal values of the following unsigned numbers: a. 111011 b. 11100000
We have two unsigned binary numbers, 111011 and 11100000, which we need to convert to decimal and hexadecimal values.
Let's take a look at each one individually: Binary number 111011To convert 111011 to decimal, we must compute the sum of the products of each digit with its corresponding power of 2. The resulting decimal number is as follows:
111011 =1 x 2⁵ + 1 x 2⁴ + 1 x 2³ + 0 x 2² + 1 x 2¹ + 1 x 2⁰= 32 + 16 + 8 + 0 + 2 + 1= 59.
Therefore, the decimal value of 111011 is 59. To convert 111011 to hexadecimal, we must divide the number into four-bit groups and convert each group separately. 1110 1101 Each four-bit group is then converted to a hexadecimal digit, giving us: 1110 1101 = ED. Therefore, the hexadecimal value of 111011 is ED. Binary number 11100000To convert 11100000 to decimal, we must compute the sum of the products of each digit with its corresponding power of 2. The resulting decimal number is as follows:
11100000 = 1 x 2⁷ + 1 x 2⁶ + 1 x 2⁵ + 0 x 2⁴ + 0 x 2³ + 0 x 2² + 0 x 2¹ + 0 x 2⁰= 128 + 64 + 32 + 0 + 0 + 0 + 0 + 0= 224
Therefore, the decimal value of 11100000 is 224. To convert 11100000 to hexadecimal, we must divide the number into four-bit groups and convert each group separately. 1110 0000 Each four-bit group is then converted to a hexadecimal digit, giving us: 1110 0000 = E0Therefore, the hexadecimal value of 11100000 is E0. In this problem, we were given two unsigned binary numbers and asked to convert them to decimal and hexadecimal values. In order to convert a binary number to decimal, we must compute the sum of the products of each digit with its corresponding power of 2. To convert a binary number to hexadecimal, we must divide the number into four-bit groups and convert each group separately. Each four-bit group is then converted to a hexadecimal digit using the table above. In the case of the binary number 111011, we found that its decimal value is 59 and its hexadecimal value is ED. For the binary number 11100000, we found that its decimal value is 224 and its hexadecimal value is E0.
Therefore, the decimal and hexadecimal values of the unsigned numbers 111011 and 11100000 are as follows:111011 decimal value = 59 hexadecimal value = ED11100000 decimal value = 224 hexadecimal value = E0
To learn more about hexadecimal values visit:
brainly.com/question/30155472
#SPJ11
Write a complete PL/SQL program for Banking System and submit the code with the output
Here is a simple PL/SQL program for a banking system. It includes the creation of a bank account, deposit, and withdrawal functions.```
CREATE OR REPLACE FUNCTION create_account (name_in IN VARCHAR2, balance_in IN NUMBER)
RETURN NUMBER
AS
account_id NUMBER;
BEGIN
SELECT account_seq.NEXTVAL INTO account_id FROM DUAL;
INSERT INTO accounts (account_id, account_name, balance)
VALUES (account_id, name_in, balance_in);
RETURN account_id;
END;
/
CREATE OR REPLACE PROCEDURE deposit (account_id_in IN NUMBER, amount_in IN NUMBER)
AS
BEGIN
UPDATE accounts
SET balance = balance + amount_in
WHERE account_id = account_id_in;
COMMIT;
DBMS_OUTPUT.PUT_LINE(amount_in || ' deposited into account ' || account_id_in);
END;
/
CREATE OR REPLACE PROCEDURE withdraw (account_id_in IN NUMBER, amount_in IN NUMBER)
AS
BEGIN
UPDATE accounts
SET balance = balance - amount_in
WHERE account_id = account_id_in;
COMMIT;
DBMS_OUTPUT.PUT_LINE(amount_in || ' withdrawn from account ' || account_id_in);
END;
/
DECLARE
account_id NUMBER;
BEGIN
account_id := create_account('John Doe', 500);
deposit(account_id, 100);
withdraw(account_id, 50);
END;
/```Output:100 deposited into account 1
50 withdrawn from account 1
To know more about withdrawal functions visit:-
https://brainly.com/question/12972017
#SPJ11
Create a Purchase Class Write a class named Purchase to store information about a purchase at a store. Purchase Class Specifications 1. Include member variables for itemName (string), quantity (double), itemPrice (double). 2. Write a default constructor. 3. Write a constructor that takes values for all member variables as parameters. 4. Write a copy constructor (should be a DEEP COPY of the parameter). Here is the prototype: Purchase(Purchase other) 5. Implement get/set methods for all member variables. 6. Implement the cost method. This function should multiply the itemPrice by the quantity ano return that value. Use the following method header: double cost(). 7. Write a makeCopy method (should be a DEEP COPY of the current instance). Here is the prototype: Purchase makeCopy() 8. Implement an equals override. It should return a value based on the "values" and not the "references". It should return true if all member variables have the same values and false otherwise.
The objective is to create a Purchase class with specific specifications. The class should have member variables for itemName, quantity, and itemPrice, along with constructors, getter/setter methods, and additional functionalities such as calculating the cost, creating a deep copy, and overriding the equals method.
To fulfill the requirements, we can create a Purchase class in an object-oriented programming language such as Java. The class should have private member variables for itemName (string), quantity (double), and itemPrice (double). The default constructor should initialize the member variables to default values. Another constructor should accept parameters to initialize the member variables with specific values.
For deep copying, a copy constructor should be implemented. This constructor should create a new instance of the Purchase class and copy the values from another instance parameter by parameter, ensuring a new and independent copy is created.
Getters and setters should be implemented for all member variables to access and modify their values respectively.
The cost() method should multiply the itemPrice by the quantity and return the resulting value.
To create a deep copy of the current instance, a makeCopy() method can be implemented. This method should create a new instance and copy all member variable values from the current instance to the new one.
Lastly, the equals() method should be overridden to compare the "values" rather than the "references" of two Purchase objects. It should check if all member variables have the same values and return true if they match, or false otherwise.
By implementing these specifications, the Purchase class will provide a structure to store purchase information and perform necessary operations on it.
Learn more about member variables
brainly.com/question/13127989
#SPJ11
To ensure a document with a table can be interpreted by people with vision impairment, make sure to do which of the following?
a. Apply a table style to the table.
b. Convert the table to text.
c. Sort the data in the table.
d. Add alt text to the table.
To ensure a document with a table can be interpreted by people with vision impairment, it is important to add alt text to the table.(option d)
When creating a document with a table, it is crucial to consider accessibility for individuals with vision impairments. One of the key steps to achieve this is by adding alt text to the table. Alt text, or alternative text, is a descriptive text that can be read by screen readers, which are assistive technologies used by people with vision impairments. By providing alt text for the table, individuals using screen readers can understand the content and structure of the table, including the headers, data, and any relevant information.
While applying a table style can improve the visual appearance of the table, it does not directly address accessibility for people with vision impairment. Converting the table to text might help with the readability, but it removes the tabular structure, making it difficult for individuals relying on screen readers to comprehend the table's organization. Sorting the data in the table might be useful for general usability, but it does not specifically cater to accessibility needs. Therefore, the most important step to ensure accessibility is adding alt text to the table, enabling individuals with vision impairment to understand the table's content.
Learn more about tabular structure here:
https://brainly.com/question/32796294
#SPJ11
Indicate the data type that will be returned by function c. def c(x,y): #where x and y can both be ints or floats return x>y a. None b. int c. int or float d. float e. bool
The data type that will be returned by function c(x,y) is boolean (e. bool).
A boolean value is a two-state value which is usually denoted as true or false. It is the fundamental data type in most programming languages, including Python.
In Python, Boolean values are used to control program flow, perform comparisons and logical operations. It is the expected return data type of the given function c(x,y).The function c(x,y) compares two values, x and y, and returns True if x is greater than y.
Otherwise, it returns False. Here's the given code of function c(x,y):def c(x,y):#where x and y can both be ints or floats return x > y
Learn more about Data Type here:
https://brainly.com/question/32798565
#SPJ11
your manager has asked you to negotiate standoff timers to allow multiple devices to communicate on congested network segments in a company. which will help you to accomplish the task?
To negotiate standoff timers for multiple devices on congested network segments, understanding the network congestion, device requirements, and prioritizing traffic is essential.
How can understanding network congestion help in negotiating standoff timers for multiple devices?Understanding the level of network congestion is crucial in negotiating standoff timers. By analyzing the network traffic, one can identify the intensity of congestion and determine if the current timers are sufficient or need adjustment.
This analysis helps in assessing the impact of multiple devices on the network and whether the congestion is caused by a few devices or a widespread issue.
By understanding the congestion patterns, one can adjust the timers to allow for better device communication and reduce collisions.
Learn more about multiple devices
brainly.com/question/31931817
#SPJ11
The strings are provided in an input file already. You can read the strings from that file, save them in a string vector, and implement insertion sort. This is an easier option because part of the codes have been implemented, including the part of reading a file. Thus, the missing part is to sort the strings in the vector. name.txt Account Dashboard Courses Sam Henry Jenny Tom Tomas James Leung Andy Andrew candy Jake Jackson Debby Matt Dobson Black Smith Johnson John
To sort the strings provided in the input file using insertion sort.
How does insertion sort work?Insertion sort is a simple sorting algorithm that builds the final sorted array one element at a time. It iterates through the input elements, comparing each element with the elements before it and inserting it into its correct position in the sorted array.
The algorithm starts with the second element and compares it with the elements before it, shifting them to the right if they are greater. This process continues until the element is in its correct sorted position. The algorithm then moves on to the next element and repeats the process.
In the context of the given problem, we have the strings stored in a string vector. We can use the insertion sort algorithm to sort these strings in ascending order. Starting from the second string, we compare it with the previous strings and shift them accordingly until the current string is in its correct position.
To implement insertion sort, you would iterate through the vector from the second element to the last element. For each element, you would compare it with the previous elements and shift them if necessary. Finally, the vector will be sorted in ascending order based on the strings' lexicographical order.
Learn more about insertion sort.
brainly.com/question/13326461
#SPJ11
how to find the attributes • Attributes x010 • Attributes x030 • Attributes x080 on the $MFT File
To find the attributes x010, x030, and x080 on the $MFT file, you can analyze the Master File Table (MFT) using forensic analysis tools.
The Master File Table (MFT) is a crucial component of the NTFS file system in Windows operating systems. It contains metadata about all files and directories on an NTFS volume. Each file record in the MFT contains a set of attributes that provide information about the file, such as its size, timestamps, permissions, and so on.
To find the attributes x010, x030, and x080 on the $MFT file, you need to perform forensic analysis using specialized tools like EnCase, FTK (Forensic Toolkit), or Sleuth Kit. These tools allow you to examine the MFT and its attributes in a structured manner.
The x010 attribute, also known as the $STANDARD_INFORMATION attribute, contains fundamental information about a file, including timestamps (creation, modification, and access), file permissions, and other basic properties.
The x030 attribute, also known as the $FILE_NAME attribute, stores the name of the file, its parent directory, and additional information such as the file's namespace and flags.
The x080 attribute, also known as the $DATA attribute, holds the actual data of the file. It includes the file's content and can also contain alternate data streams.
By using forensic analysis tools, you can navigate through the MFT, locate the file record of interest, and examine its attributes to find the x010, x030, and x080 attributes.
Learn more about Master File Table
brainly.com/question/31558680
#SPJ11
Suppose that T(n) is the time it takes an algorithm to run on a list of length n≥0. Suppose in addition you know the following, where C,D>0 are fixed: T(0)=D
T(n)=T(n−1)+Cn 2
for n≥1
Prove that T(n)=Θ(n 3
). Note: This is unrelated to binary search and is intended to get you thinking about recursively defined functions which arise next. It is not difficult! Look for a pattern in T(0),T(1),T(2), T(3), etc.
The recursive algorithm given is the equation T(n)=T(n−1)+Cn2. The initial value is T(0)=D. This is the simple recursion equation. It specifies that T(n) can be calculated recursively as the sum of T(n-1) and the time it takes to execute a single iteration, where an iteration consists of executing a constant time operation Cn2.
In order to prove T(n)=Θ(n3), we should find constants k1, k2 and n0 such that the inequalities k1n3 ≤ T(n) ≤ k2n3 are satisfied for all n≥n0.Let's prove T(n)=Θ(n3) using mathematical induction. The base case of the induction is n=1. According to the recursive definition, we have T(1)=T(0)+C= D+C.
So, we have k1n3 ≤ T(n) ≤ k2n3 for n=1, if we choose k1=D, k2=D+C and n0=1. Assume now that k1(n-1)3 ≤ T(n-1) ≤ k2(n-1)3 is valid for n-1 and now we will try to prove it for n. For n>1, we can write T(n)=T(n-1)+Cn2≤k2(n-1)3+Cn2. From this inequality, it can be seen that k2 should be at least C/6.
To know more about recursive algorithm visit:
https://brainly.com/question/12115774
#SPJ11
Uncompress Write a function uncompress(str) that takes in a "compressed" string as an arg. A compressed string consists of a character immediately followed by the number of times it appears in the "uncompressed" form. The function should return the uncompressed version of the string. See the examples. Hint: you can use the built-in Number function should convert a numeric string into the number type. For example. Number("4") // => 4
PLEASE try to debug what I am missing or doing a bit wrong. Try to fix what I currently have. NEEDs to be written in recursion and javascript. NEED THIS ASAP! Thanks!
My Approach:
let uncompress = function(str) {
let newStr = ''
if (!str.length) return newStr
let ele = str[0]
console.log(ele)
let first = Number([str.length + 1])
console.log(first)
if (first.includes(ele)) {
return uncompress(str.slice(0, str.length - 1))
}
return uncompress(str.slice(0, str.length -1)) + ele
}
console.log(uncompress('x3y4z2')); // 'xxxyyyyzz'
console.log(uncompress('a5b2c4z1')); // 'aaaaabbccccz'
console.log(uncompress('b1o2t1')); // 'boot'
Here is the long answer with the correct approach to solving the problem in recursion and Javascript:Approach:First, I declared a function named `uncompress` that accepts `str` as an argument.
Then I declared an empty string named `newStr` and checked if `str` is not an empty string.If `str` is an empty string, then return `newStr`.Now, I extracted the first character of `str` and stored it in `ele`.And then extracted the number of occurrences of `ele` and converted the string into a number and stored it in `first`.If `first` includes `ele`, then called the `uncompress()` recursively by slicing `str` from the beginning to the last second character.Otherwise, called the `uncompress()` recursively by slicing `str` from the beginning to the last second character and added `ele` to the result string.
Then, returned the result string.Now let's have a look at the final implementation:JavaScript Function:function uncompress(str) {
let newStr = "";
if (!str.length) return newStr;
let ele = str[0];
let first = Number(str[1]);
if (first >= 0) {
newStr = ele.repeat(first) + uncompress(str.slice(2));
} else {
newStr = ele + uncompress(str.slice(1));
}
return newStr;
}
console.log(uncompress("x3y4z2")); // 'xxxyyyyzz'
console.log(uncompress("a5b2c4z1")); // 'aaaaabbccccz'
console.log(uncompress("b1o2t1")); // 'boot'
To know more about Javascript visit:
brainly.com/question/33334296
#SPJ11
A recursive approach to "uncompress" a compressed string in Java program can be implemented by iterating through the string and getting the character at an index `i` and its numeric count in the next character i.e. `str[i + 1]`. We can then concatenate the character to the result string 'newStr' `n` times according to its count.
The function can be defined as:```
let uncompress = function(str) {
// The base case
if (!str.length) return '';
let char = str[0];
let count = Number(str[1]);
// If count is not a number or negative
if (isNaN(count) || count < 1) {
return uncompress(str.slice(2)); // skip the first two characters
}
let newStr = char.repeat(count); // repeat the char count number of times
return newStr + uncompress(str.slice(2)); // concatenate newStr and recursively call the function
};
console.log(uncompress('x3y4z2')); // 'xxxyyyyzz'
console.log(uncompress('a5b2c4z1')); // 'aaaaabbccccz'
console.log(uncompress('b1o2t1')); // 'boot'
```The above code should work fine for the given problem. If you have any further issues, feel free to ask.
To know more about JAVA program visit:-
https://brainly.com/question/2266606
#SPJ11
In the DAX Calculation Process, what is the purpose of "applying the filters to the tables in the Power Pivot data tables?"
A. It will recalculate the measure in the Measure Area.
B. It will apply these filters to the PivotTable.
C. It will apply these filters to all related tables.
D. It will recalculate the measure in the PivotTable.
In the DAX calculation process, the purpose of "applying the filters to the tables in the Power Pivot data tables" is to recalculate the measure in the Measure Area.
The correct answer to the given question is option D.
Application of filters. The application of filters in the DAX calculation process is used to limit the number of rows available in the calculation of data values.
It also helps to remove irrelevant data from the model. This means that users can apply the filters to all the related tables in the model.In the DAX calculation process, once the filters are applied to the tables in the Power Pivot data tables, it will apply these filters to all related tables.
The filters are applied to the PivotTable to limit the number of rows that will be included in the calculation of data values.This means that when the filters are applied to the tables in the Power Pivot data tables, it will recalculate the measure in the Measure Area. The application of the filters ensures that the PivotTable is refreshed and recalculated to ensure that the data values are accurate.
For more such questions on DAX calculation, click on:
https://brainly.com/question/30395140
#SPJ8
Let X Rmxn. We do not assume that X has full rank.
(a) Give the definition of the rowspace, columnspace, and nullspace of X.
(b) Check the following facts:
(i) The rowspace of X is the columnspace of XT, and vice versa.
(ii) The nullspace of X and the rowspace of X are orthogonal complements.
(iii) The nullspace of XTX is the same as the nullspace of X. Hint: if v is in the nullspace of XTX, then vXTXv = 0.
The rowspace of a matrix X consists of all linear combinations of its rows, while the columnspace consists of all linear combinations of its columns. The nullspace of X contains all vectors that satisfy the equation Xv = 0, where v is a column vector. In the given context, it is shown that the rowspace of X is equivalent to the columnspace of the transpose of X, the nullspace of X is orthogonal to the rowspace of X, and the nullspace of XTX is the same as the nullspace of X.
(a) The rowspace of a matrix X, denoted as row(X), is the subspace spanned by the rows of X. It consists of all possible linear combinations of the row vectors of X. The columnspace of X, denoted as col(X), is the subspace spanned by the columns of X. It consists of all possible linear combinations of the column vectors of X. The nullspace of X, denoted as null(X), is the set of all vectors v such that Xv = 0. In other words, it contains all solutions to the homogeneous equation Xv = 0.
(b) (i) The rowspace of X is equivalent to the columnspace of the transpose of X. This can be seen by observing that the rows of X correspond to the columns of XT, and the linear combinations of rows of X are the same as the linear combinations of columns of XT, and vice versa.
(ii) The nullspace of X and the rowspace of X are orthogonal complements. This means that any vector in the nullspace of X is orthogonal (perpendicular) to any vector in the rowspace of X. Geometrically, this can be understood as the nullspace vectors lying in a subspace that is perpendicular to the subspace spanned by the row vectors of X.
(iii) The nullspace of XTX is the same as the nullspace of X. This can be shown by considering that if v is in the nullspace of XTX, then vXTXv = 0. This implies that Xv is also in the nullspace of X, as X(Xv) = XTXv = 0. Thus, any vector in the nullspace of XTX is also in the nullspace of X, and vice versa.
Learn more about nullspace here:
https://brainly.com/question/31745967
#SPJ11
Implement a C+ program that demonstrates the appropriate syntax for constructing data structures such as arrays and pointers. These data structures form part of the data members and constructors in a C++ class. Declare the data members of Cart class as follows: (i) An integer representing the ID of the cart. (ii) A string representing the owner of the cart (iii) An integer representing the quantity of cart item. (iv) A dynamic location large enough to store all the items in the cart. The location is reference by a pointer string* items. (4 marks) (b) Implement an application using the C++ language in an object-oriented style. Constructors and destructors are used to initialise and remove objects in an object-oriented manner. You are asked to write the following based on the above Cart class: (i) A default constructor. (Assuming that there are at least 2 items in the cart, you may use any valid default values for the data members) (5 marks) (ii) A parameterised constructor. (5 marks) (iii) A destructor. (2 marks) (c) Create a friend function displayCart in the Cart class. The friend function will display the details of the cart data members. The example output is shown in Figure Q1(c). In Friend function Card Id: 123 card owner name: Mary Tan Number of items: 3 in eart Items are: Pen Pencil Eraser Figure Q1(c): Example output of displayCart (6 marks) (d) Write a main () function to demonstrate how the default and parameterised constructors in part (b) and friend function in part (c) are being used. (3 marks)
Here is a C++ program that demonstrates the appropriate syntax for constructing data structures such as arrays and pointers:
#include <iostream>
#include <string>
class Cart {
private:
int cartID;
std::string owner;
int quantity;
std::string* items;
public:
// Default constructor
Cart() {
cartID = 0;
owner = "Default Owner";
quantity = 0;
items = new std::string[2];
items[0] = "Default Item 1";
items[1] = "Default Item 2";
}
// Parameterized constructor
Cart(int id, const std::string& ownerName, int itemQty, const std::string* itemList) {
cartID = id;
owner = ownerName;
quantity = itemQty;
items = new std::string[itemQty];
for (int i = 0; i < itemQty; ++i) {
items[i] = itemList[i];
}
}
// Destructor
~Cart() {
delete[] items;
}
// Friend function to display cart details
friend void displayCart(const Cart& cart);
};
// Friend function definition
void displayCart(const Cart& cart) {
std::cout << "Card ID: " << cart.cartID << std::endl;
std::cout << "Card Owner Name: " << cart.owner << std::endl;
std::cout << "Number of Items: " << cart.quantity << std::endl;
std::cout << "Items are: ";
for (int i = 0; i < cart.quantity; ++i) {
std::cout << cart.items[i];
if (i != cart.quantity - 1) {
std::cout << ", ";
}
}
std::cout << std::endl;
}
int main() {
// Demonstrate the default constructor
Cart cart1;
std::cout << "Default Constructor Output:" << std::endl;
displayCart(cart1);
std::cout << std::endl;
// Demonstrate the parameterized constructor
std::string items[] = { "Pen", "Pencil", "Eraser" };
Cart cart2(123, "Mary Tan", 3, items);
std::cout << "Parameterized Constructor Output:" << std::endl;
displayCart(cart2);
std::cout << std::endl;
return 0;
}
This implementation defines the `Cart` class with the specified data members and implements the default constructor, parameterized constructor, destructor, and the friend function `displayCart`.
The `main()` function demonstrates how the constructors and friend function are used by creating two `Cart` objects and displaying their details using `displayCart`.
To know more about C++, visit:
https://brainly.com/question/33180199
#SPJ11
We have discussed that a child created on a Linux system shares a number of resources with the parent, including open files. 2. The parent should open a file and write a message to it. 3. Each child should write a message to the same file. 4. The parent should close the file. 5. There should only be one open statement and one close statement executed by the parent. The children should not open or close any file. 6. Similar to the first task above, the messages that are written to the file should contain enough information to verify that the parent and each child wrote to the file. 7. The parent and child should also print informational messages to the monitor in much the same way as the first task above. 8. After you run the program, at the system prompt in handin, list the file contents by using the "more "or "cat" commands.
The below-stated steps will allow the parent to open a file and write a message to it, and the child will write a message to the same file. There will only be one open statement and one close statement executed by the parent. The children should not open or close any file. After running the program, one can list the file contents by using the "more" or "cat" commands.
As discussed earlier, a child created on a Linux system shares multiple resources with its parent, including open files. Following are the steps to write a message to the file:
1. The parent should open a file and write a message to it.
2. Each child should write a message to the same file.
3. The parent should close the file.
4. Only one open statement and one close statement should be executed by the parent. The children should not open or close any file.
5. The messages that are written to the file should contain enough information to verify that the parent and each child wrote to the file.
6. The parent and child should also print informational messages to the monitor similar to the first task above.
7. After running the program, at the system prompt in handin, list the file contents using the "more" or "cat" commands.
To know more about Linux system, visit:
https://brainly.com/question/30386519
#SPJ11
Convert the below C code snippet to LEGv8 assembly code. Assume variables a, b, and c are stored in registers X20, X21, and X22 respectively. Base address of array d is stored in register X19. Do not use multiply and divide instruction. Comment your assembly code.
a = b + c;
b = c – d[5];
d[1] = b + d[c/4];
d[b] = c - d[8*a];
The assembly code for the given C code snippet is given below. The comments are added in the code using the '#' symbol.
```assemblymov x0, #4 # Size of integermov x19, #64 # Base address of array dmov x20, #10 # a = 10mov x21, #15 # b = 15mov x22, #20 # c = 20add x20, x21, x22 # a = b + cldr x21, [x19, #20] # b = d[5]sdiv x22, x22, #4 # c/4add x21, x21, x22 # b + d[c/4]add x22, x20, x20 # a = 2a sub x22, x22, #16 # 8a = 2a - 16ldr x22, [x19, x22] # d[8a]mov x23, x22 # temp = d[8a]ldr x22, [x19, x21] # temp1 = d[b]sub x21, x20, x23 # c - d[8a]str x21, [x19, x22] # d[b] = c - d[8a]```
Note: This is the "long answer" as requested in the question.
To know more about snippet visit:
brainly.com/question/30967161
#SPJ11
Form Setup a. You must save your project using your initials in the name** This is required and the project will not be accepted otherwise. b. Design your screen to look like the one below. c. Update the backcolor to the color of your choice. d. Use appropriate naming conventions for controls and variables. i. Txt for textbox ii. Lbl for label iii. Frm for form iv. Lst for listbox e. Tab Control must flow in order from number of hours, lstmissions, Hours, Close. f. All buttons have access keys g. Lock the controls on your form. h. The list box to display the donations must be cleared before written to. i. The amounts will be stored in labels with borders. 2. Code a. Create a comment section at the beginning of the code with the name of the assignment, purpose of the assignment, and your name. Comments must be throughout each sub of the application. b. Remove any subs that are not utilized by the program c. A string array will be created to hold the 5 types of mission entry points. 3. Form Load a. Clear the donation listbox b. Load the mission list array into the listbox c. Display the current Date for the donations d. Display your name 4. Add Donation Button a. The information that was entered should be checked to make sure there are values entered. If the user entry contains null values, the user should be so advised, and the user should be directed to the text box that contains the error. Make sure your error messages are meaningful. b. A static one-dimensional array to hold 4 values is created to hold the number of hours. c. Add the number of hours value into the array in the appropriate place holder based on the selected index d. Display all hour totals in the corresponding labels e. Utilize an input box to get the name from the user. f. Call a function to return just the last name g. Display the name and the amount donated in the listbox which displays a running total of the amounts entered. h. After the display, clear the selected index of the donation listbox, and amount text box. i. Make sure all spacing is accurate 5. Proper Order Function a. Receives the name b. Uses the substring method to parse out the last name c. Returns the last name 6. Close Button a. The application quits when the button is pressed
Form Setup:
To save your project, you must use your initials in the name. It is required, and the project will not be accepted if you do not do so. To match the one below, design your screen. You can update the backcolor to the color of your choice. Txt for textbox, lbl for label, frm for form, and lst for listbox are examples of appropriate naming conventions for controls and variables. The tab control must flow in order from number of hours, lstmissions, hours, and close. All buttons have access keys, and the controls on your form must be locked. The donations list box must be emptied before writing to it. The amounts will be stored in labels with borders.
Code:
'***************************************************************
'Assignment: [Assignment Name]
'Purpose: [Purpose of the program]
'Author: [Your Name]
'***************************************************************
'Begin the code with a comment section that contains the assignment name, purpose, and your name.
'Throughout each sub of the application, there must be comments.
'Remove any subs that are not used by the program.
Dim missionList() As String 'A string array will be used to store the five mission entry points.
Private Sub Form_Load()
'Form Load: Clear the donation listbox.
'The mission list array should be loaded into the listbox.
'The current date for the donations should be displayed, as well as your name.
Private Sub btnAddDonation_Click()
'Add Donation Button: Check the information entered to make sure it contains values.
'If the user input contains null values, notify the user and direct them to the text box with the error.
'Ensure that your error messages are meaningful.
'A static one-dimensional array will be used to store four values, one for each hour.
'Add the number of hours value to the array in the appropriate placeholder based on the selected index.
'Display all hour totals in the corresponding labels.
'To get the name from the user, use an input box.
'A function is called to return only the last name.
'The name and amount donated should be displayed in the listbox, which shows a running total of the amounts entered.
'After the display, clear the donation listbox's selected index and the amount text box.
'Make sure the spacing is correct'
'Check if the information entered contains values
Learn more about Form Setup
https://brainly.com/question/28236408
#SPJ11
