The function that returns all strings of a given length from a vector without changing the original vector is made.
To write a function that returns all strings of a given length from a vector without changing the original vector, you can follow these steps
:Step 1: Define a function that takes a vector and the desired length as arguments and returns a new vector containing all strings of the desired length. The function should not modify the original vector.
Step 2: Use the filter function to create a new vector that contains only the strings with the desired length. Use the length function to check the length of each string.
Step 3: Return the new vector created in step 2.
Here's an implementation of the function:
```rfunction getStringsByLength(vector, length)
{return filter(vector, function(string) {return length(string) == length;});}```
In this function, the first argument is the vector, and the second argument is the desired length. The filter function is used to create a new vector that contains only the strings with the desired length.
The length function is used to check the length of each string. The function returns the new vector created by the filter function.
Know more about the strings
https://brainly.com/question/25324400
#SPJ11
control charts for variables are based on data that come from
Control charts for variables are based on data that come from continuous measurement processes.
These processes generate numerical measurements of a characteristic of interest, called a variable. The variable can be any measurable attribute such as weight, length, height, volume, temperature, pressure, and so on. The data obtained from measuring the variable is plotted on a control chart to monitor the stability and performance of the process over time.
Variables control charts consist of two types: X-bar and R charts. The X-bar chart displays the average value of the variable, and the R chart displays the range or variation of the variable. Both charts are used together to detect any shifts or changes in the process mean or variability.
The data used to construct the control charts should be representative of the process being monitored and should be collected in a systematic and consistent manner. The data should be accurate, precise, and unbiased. Typically, a minimum of 20 to 25 consecutive samples of the variable is collected before constructing the control charts.
In summary, control charts for variables are based on data that come from continuous measurement processes of a measurable attribute. The data is used to construct X-bar and R charts to monitor the stability and performance of the process over time. The quality of the data is essential to ensure the reliability and usefulness of the control charts.
Learn more about data :
https://brainly.com/question/31680501
#SPJ11
. a gear ratio is a direct measure of the ratio of the rotational speeds of two interlocking gears. it is calculated as the ratio of the number of teeth in the driven gear to the number of teeth in the drive (smaller) gear. a mechanic wants to design the gears with a gear ratio of approximately 3.87248. if he assumes that wheels cannot have more than 50 teeth on them, how many teeth should there be on each gear?
The mechanic should design the gears with 387 teeth on the driven gear and 7 teeth on the drive gear to achieve an approximate gear ratio of 3.87248.
How to determine how many teeth should there be on each gearLet's assume the number of teeth on the driven gear (larger gear) is "x," and the number of teeth on the drive gear (smaller gear) is "y."
We can set up the following equation based on the given information:
x/y ≈ 3.87248
To find the closest integer values for x and y that satisfy this equation, we can multiply both sides by a common factor to eliminate the decimal approximation:
10x/10y ≈ 38.7248
Now, we can choose a common factor to scale up the equation, such as multiplying both sides by 100:
100x/100y ≈ 387.248
From this equation, it's clear that we need to find two integers close to 387.248, with one number not exceeding 50. Let's start by checking multiples of 387:
Since 387/7 is close to an integer, let's consider it as a possibility:
x = 387
y = 7
In this case, the gear ratio would be:
x/y = 387/7 ≈ 55.2857
Therefore, the mechanic should design the gears with 387 teeth on the driven gear and 7 teeth on the drive gear to achieve an approximate gear ratio of 3.87248.
Learn more about gears at https://brainly.com/question/31655918
#SPJ4
what is the voltage output of a transformer used for rechargeable flashlight batteries, if its primary has 480 turns, its secondary 8 turns, and the input voltage is 110 v?
The voltage output of the transformer used for rechargeable flashlight batteries would be 1.83 volts.
The voltage output of a transformer is determined by the ratio of the number of turns in the primary coil to the number of turns in the secondary coil. In this case, the ratio is 480:8 or 60:1. So, if the input voltage is 110 volts, the output voltage will be 110 divided by 60, which is 1.83 volts.
To calculate the voltage output, we will use the formula V_secondary = (N_secondary / N_primary) * V_primary, where V_secondary is the output voltage, N_secondary is the number of turns in the secondary coil, N_primary is the number of turns in the primary coil, and V_primary is the input voltage.
To know more about voltage visit:-
https://brainly.com/question/15282109
#SPJ11
which code segment correctly uses the margin shorthand to assign the values to a div? bottom: 15px top: 10px left: 5px right: 20px
The correct code segment to assign the values of bottom: 15px, top: 10px, left: 5px, and right: 20px to a div element is div { margin: 10px 20px 15px 5px; }.
The margin shorthand property in CSS allows you to set all four margin values in a single declaration. The values are assigned in the order of top, right, bottom, and left. So in order to assign the values of bottom: 15px, top: 10px, left: 5px, and right: 20px to a div element, we would use the following code:
breaks down the values in the margin property. The first value, 10px, is assigned to the top margin. The second value, 20px, is assigned to the right margin. The third value, 15px, is assigned to the bottom margin. The fourth and final value, 5px, is assigned to the left margin.
To know more about code visit:-
https://brainly.com/question/15301012
#SPJ11
you are presented with an ip address with a prefix of /22. how many more subnets can you add to your design if you further subnet with a vlsm mask of /27?
If you further subnet with a VLSM mask of /27, you may add 32 subnets to your design.
A /22 prefix length subnet is composed of 1024 addresses.
A /27 prefix length subnet contains 32 addresses.
In this scenario, we can discover how many /27 subnets are required to accommodate the /22 prefix length subnet.
A subnet mask of /22 has a prefix length of 22, which implies that the network portion of the address is 22 bits long and the host portion of the address is 10 bits long.
Since 32 - 22 = 10, the host part of the IP address is 10 bits long.
The maximum number of IP addresses that may be assigned to hosts in a /22 subnet is 2^10 - 2, or 1022 (2 addresses are reserved for the network address and broadcast address).
When we use a VLSM mask of /27, we reduce the number of bits allocated to the host address portion of the address by 27 - 22 = 5 bits.
This raises the number of bits dedicated to the network portion of the address to 27, allowing for the creation of additional subnets.
There are 32 /27 subnets in a /22 subnet.Each of the /27 subnets contains 32 IP addresses (30 usable). There are no network addresses in the subnets that overlap.
Know more about the subnet
https://brainly.com/question/32109432
#SPJ11
a support desk technician is dealing with an angry customer. which two approaches should the technician take in dealing with the customer? (choose two.)
When dealing with an angry customer, a support desk technician should take the following two approaches:
How to deal with an angry customerActive Listening: The technician should actively listen to the customer's concerns without interruption. This means allowing the customer to express their frustration fully and empathetically understanding their perspective.
Calm and Respectful Tone: The technician should maintain a calm and respectful tone throughout the interaction. By speaking politely and professionally, the technician can help de-escalate the situation and create a more positive environment for resolving the customer's issue.
Read more about support desk here:
https://brainly.com/question/14076013
#SPJ4
a) When comparing the quality asphaltic material provided by two plants, X and Y, for a certain highway job, sufficient samples from each plant were taken and tested. The results from Plant X, showed a peaked bell shaped distribution (Lepto Kurtosis) while those from Plant Y gave a flat shape (Platy Kurtosis). Which plant, in your opinion, has a better quality control and why?
Based solely on the shape of the distribution of their test results, it is my opinion that Plant X has better quality control than Plant Y.
A peaked bell-shaped distribution, or Lepto Kurtosis, indicates that the data is clustered more towards the center of the distribution, with fewer extreme values. On the other hand, a flat shape, or Platy Kurtosis, suggests that the data is evenly distributed, with no significant clustering towards the center or extremes.
The peaked bell-shaped distribution of Plant X's results suggests that they have a tighter control over the consistency of their material. The fewer extreme values in the data indicate that Plant X is producing asphaltic material that meets the required specifications more consistently than Plant Y.
To know more about Plant visit:
https://brainly.com/question/13156174
#SPJ11
When the application starts, the total calories displayed should be zero. Each time the user clicks one of the PictureBoxes, the calories for that fruit should be added to the total calories, and the total calories should be displayed. When the user clicks the Reset button, the total calories should be reset to zero.
The above-mentioned task can be easily achieved by using the properties of the PictureBox and the Reset Button. The following are the steps to do the same:
Step 1: Set the initial value of Total calories to 0 when the application starts.The first step is to set the initial value of Total calories to 0 when the application starts. This can be achieved by writing the following code snippet under the Form_Load() event.Private Sub Form_Load() Total_calories = 0End Sub
Step 2: Add the calories for the fruit clicked by the userTo add the calories for the fruit clicked by the user, we can use the PictureBox_Click event. In this event, we need to check which PictureBox was clicked by the user and then add the respective calories to the Total calories variable.For example, if the user clicks on the PictureBox1, we need to add the calories for Fruit1 to the Total calories variable. Similarly, if the user clicks on the PictureBox2, we need to add the calories for Fruit2 to the Total calories variable. This can be achieved by writing the following code snippet under the PictureBox_Click event.Private Sub PictureBox1_Click()Total_calories = Total_calories + Fruit1_caloriesEnd SubPrivate Sub PictureBox2_Click()
To know more about PictureBox visit:
https://brainly.com/question/31789253
#SPJ11
problem 07.071 - determine the maximum shearing stress for the given general state of stress. skip to question consider the given state of stress. take x = 38 mpa and y = 18 mpa.
The maximum shearing stress for the given general state of stress, considering the given state of stress, taking x = 38 MPa and y = 18 MPa is 20 MPa.
The maximum shearing stress for the given general state of stress, considering the given state of stress, taking x = 38 MPa and y = 18 MPa is 20 MPa.
The general state of stress is given as:σx = 38 MPa, σy = 18 MPa, τxy = -12 MPa
The normal and shear stresses on an inclined plane with respect to x-axis is given by the following equation:
σn = (σx + σy)/2 + [(σx - σy)/2]cos2θ + τxy sin2θσs = [(σx - σy)/2]sin2θ + τxy cos2θ
where, σn = normal stress,σs = shear stress,θ = angle made by the plane with the x-axis
In this case, we need to find the maximum shear stress, which occurs when θ is such that the second term in σs expression is maximum.
To obtain maximum value of σs, we equate the derivative of the second term with respect to θ to zero.
τxy cos2θ - [(σx - σy)/2]sin2θ = 0τxy cos2θ = [(σx - σy)/2]sin2θtan2θ = 2τxy/(σx - σy)
Substituting the given values, we have:tan2θ = 2(-12)/20 = -1.2
The maximum value of tan2θ is -1. So, we have:tan2θ = -1 = tan(-45°)2θ = -45°θ = -22.5°
The maximum shear stress is obtained by substituting the obtained value of θ in the expression for σs.
σs = [(σx - σy)/2]sin2θ + τxy cos2θ= [(38 - 18)/2]sin(-45°) - 12 cos(-45°)= 20 MPa
Hence, the maximum shearing stress for the given general state of stress, considering the given state of stress, taking x = 38 MPa and y = 18 MPa is 20 MPa.
Know more about the shearing stress
https://brainly.com/question/20630976
#SPJ11
If a TCP's connection has MSS of800 bytesMSS of800 bytes and its RTT is160 msecRTT is160 msec, the resulting initial sending rate during its slow start stage is about 40 kbps, here 'k' represents 1000. true or false?
True. During the slow start stage of a TCP connection, the sender gradually increases its sending rate until it reaches a certain threshold. This threshold is determined by the receiver's advertised window size and the network's.
The Maximum Segment Size (MSS) refers to the maximum amount of data that can be sent in a single TCP segment, excluding the TCP header. In this case, the MSS is 800 bytes.
The Round Trip Time (RTT) is the time it takes for a packet to travel from the sender to the receiver and back. In this case, the RTT is 160 msec. The initial sending rate during slow start can be calculated using the following formula:
Initial Sending Rate = MSS / (RTT * sqrt(2))
Plugging in the values, we get:
To know more about TCP connection visit:-
https://brainly.com/question/30439999
#SPJ11
the decision has been made to use ϕn = 20°, pt = 6 teeth/in, and ψ = 30° for a 2:1 reduction. choose the smallest acceptable full-depth pinion and gear tooth count to avoid interference
The smallest acceptable full-depth pinion and gear tooth count to avoid interference is Np = 9 and Ng = 18, respectively.
Given:ϕn = 20°pt = 6 teeth/inψ = 30°r = 2:1 reduction Formula Used:1. Tooth Depth formula: h t = 2.2/PN+2PTNcosϕ2. Circular pitch (p) formula: P = πd/N where, h t = Tooth depth PT = Transverse pressure angle N = Number of teethϕ = Pressure angle P = Circular pitch d = Pitch circle diameter Procedure: First, calculate the value of N using the relation for a 2:1 reduction: R = r = 2:1For this, Let the pinion tooth count be Np and the gear tooth count be Ng.
We will use the formulas of tooth depth and circular pitch to 1. Tooth depth: ht = 2.2/PN+2PTNcosϕIf there is no interference, h t should be smaller than the minimum allowable clearance cmin. This minimum allowable clearance can be taken as c min = 0.1575P + 0.01575 inch for involute gears.ht for pinion and gear teeth must be equal, so we get:2.2/Pp+2PTpcosϕ = 2.2/Pg+2PTgcosϕWe are given: PT = 6 teeth/inϕ = 20°ψ = 30°Np = (1/2)Ng Ng = smallest full-depth gear tooth count.
To know more about gear visit:
https://brainly.com/question/9505366
#SPJ11
Cite the phases that are present and the phase compositions for the following alloys:
(a) 25 wt% Sn-75 wt% Pb at 100°C
(b) 25 wt% Pb-75 wt% Mg at 600°C
(c) 1.25 kg Sn and 14 kg Pb at 200°C
(d) 21.7 mol Mg and 35.4 mol Pb at 350°C
(e) 4.2 mol Cu and 1.1 mol Ag at 900°C
(f) Determine the relative amounts (in terms of mass fractions) of the phases for the alloys and temperatures given in question.
(a) The composition of the 25 wt% Sn-75 wt% Pb alloy at 100°C is mostly made up of a single phase that is lead-rich and has a small amount of tin (less than 1%). This single phase is referred to as a solid solution, and it has a body-centered cubic crystal structure. The formula for the solid solution is Pb-rich α.
(b) The 25 wt% Pb-75 wt% Mg alloy at 600°C is made up of two phases: a lead-rich phase (α) and a magnesium-rich phase (β). At 600°C, the relative amounts of the two phases are 53% α and 47% β. The α phase has a body-centered cubic structure, while the β phase has a hexagonal close-packed structure.(c) The 1.25 kg Sn and 14 kg Pb alloy at 200°C is a two-phase mixture of lead-rich α phase and tin-rich β phase. At 200°C, the relative amounts of the two phases are 45% α and 55% β.
The α phase has a body-centered cubic structure, while the β phase has a tetragonal structure.(d) The 21.7 mol Mg and 35.4 mol Pb alloy at 350°C is a two-phase mixture of lead-rich α phase and magnesium-rich β phase. At 350°C, the relative amounts of the two phases are 24% α and 76% β. The α phase has a body-centered cubic structure, while the β phase has a hexagonal close-packed structure.(e) The 4.2 mol Cu and 1.1 mol Ag alloy at 900°C is a single-phase mixture of copper-rich solid solution.
(f) To determine the relative amounts of the phases, we need to convert the weight percentages or the mole fractions into mass fractions. Once we have the mass fractions, we can use lever rule to calculate the relative amounts of the phases. The lever rule states that the mass fraction of one phase is proportional to the length of the tie-line that connects the two-phase regions on the phase diagram. The mass fraction of the other phase is 1 minus the mass fraction of the first phase.
To know more about fractions visit :
https://brainly.com/question/10354322
#SPJ11
The technology that makes up an organization’s digital ecosystem is its:
digital platform
Internet of Things
technology sponsor
IT consumerization
IT monarchy
The digital platform is the foundation of an organization's digital ecosystem, which includes IoT devices, and is overseen by option c) technology sponsor.
The technology that makes up an organization's digital ecosystem is its digital platform. This includes all of the hardware, software, and infrastructure that are used to support the organization's digital operations. It also includes the Internet of Things (IoT) devices that are connected to the platform, such as sensors, cameras, and other smart devices.
IT consumerization refers to the trend of employees bringing their own personal devices and software into the workplace, and using them for work-related tasks. This can create challenges for IT departments, as they need to ensure that these devices are secure and compatible with the organization's digital platform.
To know more about devices visit:
https://brainly.com/question/31864860
#SPJ11
write (define) a public static method named getallodd, that takes an arraylist as an argument and returns a new arraylist with all of the odd values in the argument arraylist`.
The code is written in the space below
How to write the codeimport java.util.ArrayList;
public class Main {
public static ArrayList<Integer> getAllOdd(ArrayList<Integer> numbers) {
ArrayList<Integer> oddNumbers = new ArrayList<>();
for (int number : numbers) {
if (number % 2 != 0) {
oddNumbers.add(number);
}
}
return oddNumbers;
}
public static void main(String[] args) {
ArrayList<Integer> numbers = new ArrayList<>();
numbers.add(1);
numbers.add(2);
numbers.add(3);
numbers.add(4);
numbers.add(5);
ArrayList<Integer> oddNumbers = getAllOdd(numbers);
for (int number : oddNumbers) {
System.out.println(number);
}
}
}
Read mroe on public static method here https://brainly.com/question/30032860
#SPJ4
when checking the tires of a truck, an offcenter stem in a truck wheel opening is an indicator of a:___
An offcenter stem in a truck wheel opening is an indicator of a bent wheel.
The valve stem on a wheel is typically centered in the wheel opening, and any deviation from this center position can be a sign of a bent wheel. A bent wheel can be caused by a number of factors, such as hitting a pothole or curb, or by normal wear and tear over time.
A wheel misalignment occurs when the angles of the tires are not properly adjusted, causing uneven tire wear and poor vehicle handling. An off-center stem in a truck wheel opening can be a visible sign of this issue, indicating that the wheel may not be properly seated or that there is an issue with the suspension components.
To know more about bent wheel visit:-
https://brainly.com/question/31327633
#SPJ11
Three infinite lines of charge, rhol1 = 3 (nC/m), rhol2 = −3 (nC/m), and rhol3 = 3 (nC/m), are all parallel to the z-axis. If they pass through the respective points (0,−b), (0,0), and (0,b) in the x–y plane, find the electric field at (a,0,0). Evaluate your result for a = 2 cm and b = 1 cm.
The given question is regarding the calculation of the electric field produced by infinite lines of charge.
The formula to calculate the electric field due to infinite lines of charge is given below. E = (ρ / 2ε0 )iˆ(1 - cosθ1) + (ρ / 2ε0 )iˆ(1 - cosθ2)Here, E = electric field due to infinite lines of charge.ρ = linear charge density.ε0 = permittivity of free space. iˆ = unit vector in the direction of the field.θ1, θ2 = angles between the line joining the point and the points on the wire and the vector connecting the charge element to the point where the field is to be calculated.
We are given the following data,ρl1 = 3 (nC/m)ρl2 = −3 (nC/m)ρl3 = 3 (nC/m)The three infinite lines of charge are all parallel to the z-axis and pass through the respective points (0,−b), (0,0), and (0,b) in the x–y plane. The point where we have to calculate the electric field is (a, 0, 0)We have to evaluate our result for a = 2 cm and b = 1 cm.
To know more about electric visit:-
https://brainly.com/question/15306001
#SPJ11
if a truss has 7 joints, how many members can the truss have and still be considered statically determinate? group of answer choices 5 11 14 varies on the type of truss (howe, pratt, etc.) 9
A truss is considered statically determinate if the number of members in it is equal to or less than twice the number of joints in it, minus three.
The formula can be represented as;M ≤ 2J - 3where M is the number of members, and J is the number of joints.So if a truss has 7 joints, it can have a maximum of 11 members and still be considered statically determinate. Any number of members above 11 will make the truss statically indeterminate because there will be redundant members that can't be supported by the given number of joints.Therefore, the answer to this question is 11 members.
To know more about statically visit:
https://brainly.com/question/24160155
#SPJ11
cite the phases that are present, the phase compositions and fraction of phases for the following alloys:
At this temperature, the alloy is in the liquid phase. The phase composition is a single liquid phase with 15wt% tin (Sn) and 85wt% lead (Pb).
At this temperature, the alloy is in the liquid phase. The phase composition is a single liquid phase with 25 percent lead (Pb) and 85 percent magnesium (Mg).
How to determine the solutionThis is a composition in the Pb-Sn system. The Pb-Sn phase diagram reveals that at 100°C, the system is a single-phase region, specifically in the beta phase (Pb-rich phase). As the composition is 85 wt% Pb, the phase present would be the Pb-rich phase.
Read more on alloys here:https://brainly.com/question/1759694
#SPJ4
Complete question
Cite the phases that are present and the phase compositions for the following alloys: 15 wt% Sn-85 wt% Pb at 100 degree C (212 degree F) 25 wt% Pb-75 wt% Mg at 425 degree C (800 degree F)
For each number: a. State the null hypothesis. b. State the alternative hypothesis. c. What is the obtained t value? d. What is the significance or probability associated with the obtained t value? e. What do the results indicate? 1. A social psychologist was interested in the sex differences in the sociability of teenagers. Using the number of good friends as a measure, she compared the sociability level of 10 female and 10 male teenagers. The table below shows the data she gathered.
As per the given details, null hypothesis (H0) is that there is no significant difference in the sociability levels between female and male teenagers.
We must compare the social skills of male and female teenagers based on the number of close friends in order to conduct the statistical study. The following information is used in this comparison:
Females: 8, 3, 1, 7, 7, 6, 3, 8, 5, 8
Males: 1, 5, 8, 3, 2, 1, 2, 2, 4, 3
a. There is no discernible difference between male and female teenagers in terms of null hypothesis (H0).
b. Male and female teenagers differ significantly from one another in terms of friendliness, according to an alternative hypothesis (Ha).
The obtained t-value and significance can be calculated using the given data in the manners given below:
T-value determined is 1.168
Significance (p-value): 0.260
We fail to reject the null hypothesis since the significance (p-value), which is 0.260 and higher than 0.05, is more than 0.05.
Thus, this implies that, based on the available data, there is insufficient evidence to demonstrate a significant difference in the levels of sociability between teenage boys and girls.
For more details regarding null hypothesis, visit:
https://brainly.com/question/30821298
#SPJ4
xt: When running, which line in Text 1 detects a timer overrun exception? O 31 O 59 O 35 42
Text 1 is a program that demonstrates how to use the Timer and Timer Task classes to schedule a task to execute at fixed intervals.
In the given program, the task's run method outputs the current date and time. You can detect a timer overrun exception by wrapping the schedule At Fixed Rate method call in a try-catch block that catches the Timer Runtime If the timer queue overruns, the schedule At Fixed Rate method throws a Timer Runtime Exception, which indicates that the task's next scheduled execution was delayed and the task might now be running continuously to catch up.
Timer overrun exception A timer overrun exception is thrown when the timer queue overruns and a timer task cannot be run because too many tasks are scheduled. The timer queue will only execute tasks scheduled within the next 100 milliseconds.
To know more about Timer visit:-
https://brainly.com/question/32295384
#SPJ11
What should you do when you discover an uncommunicated change in your tool (e.g. Workflow Management Tool ITSM Tool, etc.)? Select the correct option(s) and click submit. As a team, understand the change in detail, and update SOPs, scripts, etc. if required As a team, investigate why the change communication was missed, and take corrective actions to avoid recurrence As a team, analyze whether any past work items were impacted by this change, and take necessary corrective action if required All of the above
When you discover an uncommunicated change in your tool, it is important to take immediate action to avoid any negative impact on your work.
The correct option would be "All of the above" because all of these actions are important to take as a team.
Firstly, it is essential to understand the change in detail and how it may affect your work processes. This will help you update your standard operating procedures (SOPs), scripts, and other relevant documentation. Secondly, it is crucial to investigate why the change communication was missed and take corrective actions to avoid recurrence. This will help ensure that future changes are communicated effectively and that everyone is on the same page.
Lastly, it is essential to analyze whether any past work items were impacted by this change and take necessary action if required. This will help prevent any further negative impact and ensure that your work is up-to-date and accurate. Overall, it is important to work as a team to address uncommunicated changes and take necessary actions to ensure that your work processes are optimized and efficient.
To know more about uncommunicated visit :
https://brainly.com/question/29567501
#SPJ11
2. In a certain group of people, it was found that 42% of them have alcoholic fathers, 8% of them have alcoholic mothers, and 48% of them have at least one alcoholic parent. If we randomly choose one individual from this group, what is the probability that: (a) the selected individual has two alcoholic parents? (b) the selected individual has an alcoholic mother but he/she does not have an alcoholic father? (c) the selected individual has an alcoholic mother, if he/she has an alcoholic father? (d) the selected individual has an alcoholic mother, if he/she does not have an alcoholic father?
We have (a) Probability of the selected individual has two alcoholic parents: P(Two alcoholic parents) = P(Alcoholic fathers) + P(Alcoholic mothers) - P(Alcoholic fathers and mothers) = 0.42 + 0.08 - 0.48 = 0.02.
Probability of the selected individual has an alcoholic mother but he/she does not have an alcoholic father: P(Alcoholic mother and not alcoholic father) = P(Alcoholic mothers) - P(Alcoholic fathers and mothers) = 0.08 - 0.48 = -0.4 < 0. But, probability cannot be negative. Therefore, the probability is 0. Hence, the required probability is 0.
Probability of the selected individual has an alcoholic mother, given he/she has an alcoholic father: P(Alcoholic mother | alcoholic father) = P(Alcoholic mothers and fathers) / P(Alcoholic fathers) = 0.48 / 0.42 = 1.14. But, probability cannot be greater than 1. Therefore, the probability is 1. Hence, the required probability is 1.(d) Probability of the selected individual has an alcoholic mother.
To know more about Probability visit:
https://brainly.com/question/15270030
#SPJ11
As you consider the different methods of sharing files, which of the following is a disadvantage of cloud computing a. The amount of space that files will take up on your computer. b. The inability to access your files if you lose your Internet connection. c. The files you will lose if your computer crashes. d. How long it will take to access a backup of files. can be installed that would act as a barrier and inspect data being
The disadvantage of cloud computing among the options given is b. The inability to access your files if you lose your Internet connection.
Cloud computing relies heavily on an internet connection, and if the connection is lost, it can be challenging or impossible to access your files. However, cloud computing also offers many advantages, such as remote access to files, the ability to collaborate with others in real-time, and automatic backups.
The amount of space that files take up on your computer is not a disadvantage of cloud computing because the files are stored on remote servers, not on your computer. Losing files due to computer crashes is also not a disadvantage of cloud computing because the files are backed up on remote servers.
To know more about cloud visit:
https://brainly.com/question/30137210
#SPJ11
list the levels of transformation and name an example for each level.
There are four levels of transformation: incremental, modular, architectural, and radical.
Incremental transformation involves making small changes to an existing system or process. An example of this would be updating software to fix bugs or adding a new feature to a product. Modular transformation involves breaking down a system or process into smaller, more manageable modules
Raw Materials - This level involves extracting raw materials from the environment. Example: Mining of minerals like iron ore.Basic Processing - This level involves converting raw materials into primary commodities. Example: Smelting iron ore to produce pig iron.
To know more about transformation visit:-
https://brainly.com/question/31771105
#SPJ11
