Here is a Python program that continually reads user input (numbers) until a multiple of 7 is provided. This functionality is written in a separate function, not in main(). The program uses a while loop to keep reading input until the user enters a multiple of 7:```def read_until_multiple_of_7():
x = int(input("Enter a number: "))
while x % 7 != 0:
x = int(input("Enter another number: ")) print("Multiple of 7 detected: ", x)```Here's how the code works:1. The function `read_until_multiple_of_7()` is defined.2. The variable `x` is initialized to the integer value entered by the user.3. A while loop is used to keep reading input until the user enters a multiple of 7.
The loop condition is `x % 7 != 0`, which means "while x is not a multiple of 7".4. Inside the loop, the user is prompted to enter another number. The input is read as an integer and stored in the variable `x`.5. When the user finally enters a multiple of 7, the loop exits and the function prints a message indicating that a multiple of 7 was detected, along with the value of `x`.Note: Make sure to call the `read_until_multiple_of_7()` function from your `main()` function or from the interactive interpreter to test it out.
To know more about Python visit:
https://brainly.com/question/30391554
#SPJ11
A C-style string is a character array with a special character '\0' indicating the end (therefore its length need not be passed around as with other arrays). Here's an example: char cstr [6] = {'h', 'e','1','1', 'o', '\0'};' Assume the characters are ASCII encoded. Write a function which produces a new dynamically allocated C-string which is the same length as the input, however all of the lowercase characters a, b, ..., z are replaced with their uppercase equivalent. Its exact signature should be: char* to upper (char* original); The function should not modify characters outside the lowercase range. The only built-in function you may use is strlen(). Do not use std::string.
The statement "The character with the ASCII code 0 is called the NUL character" is true. In C and C++, the NUL character, represented by '\0', is used as a sentinel value to indicate the end of a C-string. It is used to mark the termination of character sequences and is not considered a printable character.
- C-strings are character arrays that rely on the NUL character ('\0') to determine the end of the string.
- The NUL character has an ASCII code of 0, and its presence at the end of a C-string allows various string functions to identify the end of the string.
- By convention, C-strings are terminated with the NUL character to ensure proper string handling and prevent reading beyond the intended string length.
- The NUL character is not considered part of the visible characters in the string but rather serves as a termination marker.
- Understanding the NUL character and its role in C-strings is crucial for correctly working with C-string functions and ensuring proper string manipulation and termination.
Learn more about ASCII code:
brainly.com/question/30530273
#SPJ4
The program should have the following requirements: You will read in from the screen a value, which will be equivalent to a temperature. Declare a variable inside the program that will hold the value of the temperature. • . You will then run your value through your if statement, looking for the appropriate response. . Your conditions for your if statement will be the following: o If it is below 0°, then it is freezing outside. o If it is below 15", it is very cold outside. o if it is below 32", it is cold enough to snow. O If it is below 45", it is chilly outside. o If it is below 57", it is cool outside. O If it is below 68, it is getting warm. O If it is below 75", it is warm outside. o if it is below 86", it is starting to get hot. o If it is below 95", it is hot. o If it is below 100°, it is really hot. Your program needs to be appropriately documented • Including your name and date You will save it in the assignment folder under assignment 2 under your name on the remote computer.
Here is an example of a program that meets the requirements:
```python
# Temperature Classification Program
# Author: [Your Name]
# Date: [Current Date]
# Read the temperature value from the user
temperature = float(input("Enter the temperature: "))
# Check the temperature against the defined conditions and print the corresponding response
if temperature < 0:
print("It is freezing outside.")
elif temperature < 15:
print("It is very cold outside.")
elif temperature < 32:
print("It is cold enough to snow.")
elif temperature < 45:
print("It is chilly outside.")
elif temperature < 57:
print("It is cool outside.")
elif temperature < 68:
print("It is getting warm.")
elif temperature < 75:
print("It is warm outside.")
elif temperature < 86:
print("It is starting to get hot.")
elif temperature < 95:
print("It is hot.")
elif temperature < 100:
print("It is really hot.")
else:
print("The temperature is extremely high.")
```
In this program, we declare a variable `temperature` to hold the input value from the user.
Then, we use a series of if-elif statements to check the temperature against the defined conditions and print the corresponding response based on the temperature range.
Know more about python:
https://brainly.com/question/30391554
#SPJ4
university of illinois urbana chamapaign. i was accepted for my second choice major rateher than my first choice (comp sci) is there any way i can dual degree my second choice with computer science or transfer majors to computer science? if so, how?
If you were accepted for your second choice major at the University of Illinois Urbana-Champaign and you are interested in dual majoring or transferring to Computer Science, there are potential options available to you.
Here are a few steps you can take: Contact the academic advising office: Reach out to the academic advising office or department of your second choice major to inquire about the possibility of dual majoring or transferring to Computer Science. They will provide you with specific information regarding the requirements and procedures.
Research the Computer Science department: Explore the Computer Science department's website to gain a better understanding of their requirements and any specific criteria for transferring into the major. Take note of any prerequisite courses or GPA requirements.
Meet with a Computer Science advisor: Schedule a meeting with an advisor from the Computer Science department. They can guide you through the process, evaluate your eligibility for transferring or dual majoring, and provide advice on course selection and academic planning.
Consider prerequisites and deadlines: Determine if you need to complete any prerequisite courses before transferring or dual majoring. Be aware of any deadlines or application requirements for transferring into the Computer Science program.
Maintain a strong academic record: It is important to excel academically in your current major to demonstrate your commitment and readiness to take on the additional workload of Computer Science.
Remember, the specific process and requirements may vary, so it is crucial to reach out to the appropriate advisors and departments to get accurate and up-to-date information tailored to your situation.
Learn more about interested here
https://brainly.com/question/30995425
#SPJ11
Write a loop that generates the following output (exactly as seen):
01, 02: 03, 04: 05, 06; 07, 08: 09, 10: 11, 12; 13, 14: 15.
16: 17, 18; 19, 20: 21, 22: 23, 24; 25, 26: 27, 28: 29, 30.
Except for the leading zeros, numbers are not allowed to be hard coded (use the loop's counter!). A selection statement must be used to determine what punctuation marks to output. Hint: modulo
You may not test for specific numbers when determining punctuation. For example, the following method is not allowed:
if(x == 17 || x == 19 || x == 21)
cout << ",";
The algorithm must be written in a separate function, not in main ().
Here's the solution for the given problem that generates the following output using the loop in C++:01, 02: 03, 04: 05, 06; 07, 08: 09, 10: 11, 12; 13, 14: 15.16: 17, 18; 19, 20: 21, 22: 23, 24; 25, 26: 27, 28: 29, 30. We will use the modulo operator to place the appropriate punctuation. Given below is the C++ code to achieve the same :
#include
using namespace std;
void printNum(int n){
if (n < 10){
cout << "0" << n;
} else{
cout << n;
}
}
void generateOutput(){
for (int i = 1; i <= 30; i++){
printNum(i);
if (i % 30 == 0){
cout << "." << endl;
} else if (i % 6 == 0){
cout << "; ";
} else if (i % 2 == 0){
cout << ", ";
} else{
cout << ": ";
}
}
}
int main(){
generateOutput();
return 0;
}
In the code above, we are using the modulo operator to determine the punctuation to place between the numbers. The printNum () function is used to print the numbers with leading zeros when needed. The generate Output () function contains the loop that iterates through the numbers from 1 to 30 and places the appropriate punctuation between the numbers.
To know more about generates visit:
https://brainly.com/question/12841996
#SPJ11
Comparative analysis between COBIT 5, ITIL & ISO governance framework
COBIT 5, ITIL, and ISO are three different frameworks that are utilized in the IT industry to help improve IT governance, security, and management.
Here is a comparative analysis between these three frameworks:COBIT 5 (Control Objectives for Information and Related Technology) is a framework for IT governance and management. It is a globally accepted framework that provides a comprehensive and holistic approach to IT governance. COBIT 5's primary goal is to enable businesses to achieve their objectives and maximize their investments in IT.
Itil (Information Technology Infrastructure Library) is a framework that provides guidance on IT service management (ITSM) best practices. It focuses on improving IT services' quality and delivery to meet business needs. ITIL is structured into five core books, which are Service Strategy, Service Design, Service Transition, Service Operation, and Continual Service Improvement.ISO 27001 is a globally recognized standard for information security management systems (ISMS).
It outlines the requirements for establishing, implementing, maintaining, and continuously improving an organization's ISMS.ISO 27001's primary goal is to provide a systematic approach to managing and protecting sensitive information from unauthorized access, alteration, or destruction.Comparison between COBIT 5, ITIL, and ISO Governance FrameworkCOBIT 5 provides a comprehensive framework for IT governance and management, focusing on the enterprise's entire IT landscape. ITIL, on the other hand, focuses on ITSM best practices to improve IT services' quality and delivery.
ISO 27001 focuses on information security management and provides a systematic approach to managing and protecting sensitive information from unauthorized access, alteration, or destruction.COBIT 5 is aligned with other global frameworks and standards, including ISO 27001, ITIL, and COSO. ITIL and ISO 27001 can be used together to implement ITSM best practices and manage information security.
COBIT 5, ITIL, and ISO 27001 are all globally recognized and accepted frameworks that can be used to enhance an organization's IT governance, management, and security. They can be utilized together to provide a comprehensive and holistic approach to IT governance, management, and security.
To know more about IT industry visit:
https://brainly.com/question/16680576
#SPJ11
"Calculate the negative equivalent of the following binary
number:
011011102
Show your steps and write your answer as binary."
The given binary number is 011011102. Its negative equivalent in two's complement can be calculated as follows: Step 1: Determine the number of bits used for the binary number
Since the given binary number is in decimal form and the base of the binary number is 2, we can determine the number of bits used for the binary number using the formula log2(decimal) + 1.
In this case, we have: log2(011011102) + 1= 7 bits (rounded up from 6.76) Step 2: Calculate the one's complement To calculate the one's complement, we flip all the bits in the binary number. Thus: 011011102 → 100100012 Step 3: Add 1 to the one's complement To calculate the two's complement, we add 1 to the one's complement obtained in step 2. Thus:100100012 + 1 = 100100102 Therefore, the negative equivalent of the binary number 011011102 is 100100102. This is the final answer in binary form.
To know more about binary visit:
https://brainly.com/question/28222245
#SPJ11
Messages in the________often indicate operations in the ___________.
Related to UML
The missing terms in the given statement are "sequence diagrams" and "system."A sequence diagram is a type of UML diagram that displays interactions between objects in a chronological order. These interactions are presented as a sequence of calls or messages. In a sequence diagram, the objects are arranged horizontally along the top of the diagram, and the messages exchanged between them are represented by vertical arrows.
Messages in the sequence diagrams often indicate operations in the system. This means that sequence diagrams allow you to visualize the interactions between the various components of a system. They are particularly useful for modeling complex systems with multiple objects and processes, as they allow you to see how the different components of the system work together to achieve a particular goal.Sequence diagrams are one of the most common types of UML diagrams, and they are widely used in software development to model system behavior.
They are used to document and design the interactions between objects in a system, and to ensure that the system behaves correctly under different scenarios.
To know more about sequence diagrams visit:-
https://brainly.com/question/29346101
#SPJ11
A poker deck contains 52 cards. Each card has a suit of either clubs, diamonds, hearts, or spades
(denoted C, D, H, S in the input data). Each card also has a value of either 2 through 10, jack,
queen, king, or ace (denoted 2, 3, 4, 5, 6, 7, 8, 9, T, J, Q, K, A). For scoring purposes, card values
are ordered as above, with 2 having the lowest and ace the highest value. The suit has no impact on
value.
A poker hand consists of five cards dealt from the deck. Poker hands are ranked by the following
partial order from lowest to highest.
High Card: Hands that do not fit any higher category are ranked by the value of their highest card.
If the highest cards have the same value, the hands are ranked by the next highest, and so on.
Pair: Two of the five cards in the hand have the same value. Hands that both contain a pair are
ranked by the value of the cards forming the pair. If these values are the same, the hands are
ranked by the values of the cards not forming the pair, in decreasing order.
Two Pairs: The hand contains two different pairs. Hands that both contain two pairs are ranked
by the value of their highest pair. Hands with the same highest pair are ranked by the value of
their other pair. If these values are the same the hands are ranked by the value of the
remaining card.
Three of a Kind: Three of the cards in the hand have the same value. Hands which both contain
three of a kind are ranked by the value of the three cards.
Straight: Hand contains five cards with consecutive values. Hands which both contain a straight are
ranked by their highest card.
Flush: Hand contains five cards of the same suit. Hands which are both flushes are ranked using the
rules for High Card.
Full House: Three cards of the same value, with the remaining two cards forming a pair. Ranked by
the value of the three cards.
Four of a Kind: Four cards with the same value. Ranked by the value of the four cards.
Straight Flush: Five cards of the same suit with consecutive values. Ranked by the highest card in
the hand.
Your job is to compare several pairs of poker hands and to indicate which, if either, has a higher
rank.
Input
The input file contains several lines, each containing the designation of ten cards: the first five cards
are the hand for the player named "Black" and the next five cards are the hand for the player named
"White".
Output
For each line of input, print a line containing one of the following:
Black wins.
White wins.
Tie.
18
Sample Input
2H 3D 5S 9C KD 2C 3H 4S 8C AH
2H 4S 4C 2D 4H 2S 8S AS QS 3S
2H 3D 5S 9C KD 2C 3H 4S 8C KH
2H 3D 5S 9C KD 2D 3H 5C 9S KH
Sample Output
White wins.
Black wins.
Black wins.
Tie.
CODE USING LANGUAGE JAVA
Here's the Java code to compare several pairs of poker hands and to indicate which, if either, has a higher rank in the scenario described in the question: import java. util.*;class Main { public static void main(String[] args) { Scanner sc = new Scanner.
(System.in); while (sc.hasNext()) { String[] black = new String[5]; String[] white = new String[5]; for (int i = 0; i < 5; i++) black[i] = sc.next(); for (int i = 0; i < 5; i++) white[i] = sc.next(); Arrays.sort(black); Arrays.sort(white); boolean blackFlush = true, whiteFlush = true; char flush = black[0].charAt(1); for (int i = 1; i < 5; i++) { if (black[i].charAt(1) != flush) blackFlush = false; if (white[i].charAt(1) != flush).
whiteFlush = false; } if (blackFlush && !whiteFlush) { System.out.println("Black wins."); continue; } if (!blackFlush && whiteFlush) { System.out.println("White wins."); continue; } String blackCards = "", whiteCards = ""; for (int i = 0; i < 5; i++) { blackCards += black[i].charAt(0); whiteCards += white[i].charAt(0); } int blackHigh = 0, whiteHigh = 0; for (int i = 0; i < 5; i++) { if (blackCards.charAt(i) == 'T') blackHigh = 10; else if (blackCards.charAt(i) == 'J') blackHigh = 11; else if (blackCards.charAt(i) == 'Q') blackHigh = 12; else if (blackCards.charAt(i) == 'K') blackHigh = 13; else if (blackCards.charAt(i) == 'A') blackHigh = 14; else blackHigh = Math.max(blackHigh, blackCards.charAt(i) - '0'); if (whiteCards.charAt(i) == 'T') whiteHigh = 10; else if (whiteCards.charAt(i) == 'J') whiteHigh = 11; else if (whiteCards.charAt(i) == 'Q') whiteHigh = 12; else if (whiteCards.charAt(i) == 'K') whiteHigh = 13; else if (whiteCards.charAt(i) == 'A') whiteHigh = 14; else whiteHigh = Math.max(whiteHigh, whiteCards.charAt(i) - '0'); } if (blackHigh > whiteHigh) System.out.println("Black wins."); else if (whiteHigh > blackHigh) System.out.println("White wins."); else System.out.println("Tie."); } }}
To know more about Java visit:
https://brainly.com/question/33208576
#SPJ11
You have been employed in G Co company as an IT auditor.
Explain to management two types of software that can be used in the organization.
As an IT auditor at G Co, I would recommend considering two types of software that can greatly benefit the organization:
Enterprise Resource Planning (ERP) Software: ERP software integrates and manages core business processes across various departments and functions, providing a centralized and unified system for data management and operations. It helps streamline and automate processes such as accounting, finance, human resources, inventory management, supply chain, and customer relationship management. By implementing an ERP system, G Co can achieve better efficiency, improved data accuracy, enhanced decision-making capabilities, and increased collaboration among different departments. It also allows for better control and monitoring of business operations, ensuring compliance with regulatory requirements and reducing the risk of errors and fraud.
Security and Risk Management Software: Given the increasing importance of data security and privacy, investing in security and risk management software is crucial for G Co. This software encompasses various tools and solutions to protect the organization's sensitive information, detect and prevent security breaches, and manage risk effectively. It can include features such as network and endpoint security, vulnerability scanning, intrusion detection and prevention systems, encryption, data loss prevention, and security incident management. By implementing robust security and risk management software, G Co can mitigate the risk of cyber threats, safeguard sensitive data, comply with regulatory standards, and ensure business continuity.
Both ERP software and security and risk management software can significantly enhance the organization's operational efficiency, data security, and risk management capabilities. It is essential for G Co's management to evaluate their specific needs, conduct thorough research, and select reputable vendors to ensure the successful implementation and utilization of these software solutions.
Learn more about software here
https://brainly.com/question/28224061
#SPJ11
Go on decreasing the size of the screen and see the background colour change
When decreasing the size of the screen, the background color can change due to responsive design. Responsive design is an approach to web design that allows a site to adapt to the device it is being viewed on. As the screen size decreases, the layout of the website changes and the content adjusts to fit the new size.
This can cause the background color to change, as the elements on the page are rearranged. Responsive design is important because it ensures that users can access and interact with a website on any device, regardless of the screen size. Without responsive design, websites can be difficult to use on smaller screens and may not display properly. By adapting to the device, responsive design ensures that users have a seamless experience, no matter what device they are using.
Responsive design is an approach to web design that allows a site to adapt to the device it is being viewed on. As the screen size decreases, the layout of the website changes and the content adjusts to fit the new size. Responsive design is an approach to web design that allows a site to adapt to the device it is being viewed on. As the screen size decreases, the layout of the website changes and the content adjusts to fit the new size.
To know more about website visit:
https://brainly.com/question/29777063
#SPJ11
Unit testing Add two more statements to main() to test inputs 3 and 1 Use print statements similar to the existing one (don't use assert) CHALLENGE ACTIVITY 6.9.1: Function errors Copying one function to create another. Using the CelsiusTokelvin function as a guide, create a new function, changing the name to Kelvin ToCelsius, and modifying the function accordingly
To add two more statements to the main() function to test inputs 3 and 1, and to create a new function called KelvinToCelsius, you can modify the code as follows:
```csharp
using System;
class Program
{
static double CelsiusToKelvin(double celsius)
{
double kelvin = celsius + 273.15;
return kelvin;
}
static double KelvinToCelsius(double kelvin)
{
double celsius = kelvin - 273.15;
return celsius;
}
static void Main(string[] args)
{
double temperature = 25.0;
double convertedTemperature = CelsiusToKelvin(temperature);
Console.WriteLine("Temperature in Kelvin: " + convertedTemperature);
temperature = 3.0;
convertedTemperature = CelsiusToKelvin(temperature);
Console.WriteLine("Temperature in Kelvin: " + convertedTemperature);
temperature = 1.0;
convertedTemperature = CelsiusToKelvin(temperature);
Console.WriteLine("Temperature in Kelvin: " + convertedTemperature);
double kelvinTemperature = 298.15;
double celsiusTemperature = KelvinToCelsius(kelvinTemperature);
Console.WriteLine("Temperature in Celsius: " + celsiusTemperature);
}
}
```
In the modified code, two additional statements have been added to the main() function to test inputs 3 and 1.
The CelsiusToKelvin() function is called with the respective temperature values, and the converted temperatures in Kelvin are printed using Console.WriteLine().
Additionally, a new function called KelvinToCelsius() has been added, which takes a temperature value in Kelvin as input and converts it to Celsius.
The function follows a similar logic as the CelsiusToKelvin() function but performs the inverse conversion. The result is stored in the variable celsius temperature and printed using Console.WriteLine().
Know more about variable:
https://brainly.com/question/15078630
#SPJ4
Study the scenario and complete the question(s) that follow:
[Cybercrime in South Africa]
South African residents are at a high risk of having their personal details exploited by malicious actors, according to research from Surfshark.
The study ranked South Africa sixth in the world when it comes to the nations most threatened by cybercrime, but its numbers are relatively low compared to the UK and the US. The methodology behind the study included assigning figures for cyber threats, financial losses, and probability points to determine how likely residents of a country are to have their exposed data accessed and used maliciously.
Surfshark said it used FBI data to develop its index.
It lists South Africa seventh in terms of the number of cybercrime victims — behind France.
Transnet ransomware attack
Transnet was the victim of a cyberattack that forced the company to declare force majeure at container terminals and adjust to the manual processing of cargo.
South Africa’s port and rail company appeared to have been hit by a similar strain of ransomware linked to a chain of high-profile data breaches likely carried out by cybercriminals from Eastern Europe and Russia.
A ransom note left by the attackers claimed they had encrypted Transnet’s files, including a terabyte of personal data, financial reports and other documents.
As with many ransomware attacks, it also directed Transnet to a dark web chat portal to negotiate with the hackers. Public enterprises minister Pravin Gordhan later revealed that no ransom had been paid during a media update in August 2021.
TransUnion confirmed that the data included ID numbers, date of birth, gender, telephone number, email address, physical address, marital status, employer, duration of employment, vehicle finance contract number, and vehicle identification number.
N4ughtySecTU — the group that claimed responsibility for the attack — alleged it had acquired 4TB of data that included a database of 54 million South Africans. TransUnion received a ransom demand of $15 million (R237 million), which it refused to pay.
Although TransUnion claims the attacker exfiltrated 3.6 million records from its systems, N4ughtySecTU said it obtained several databases.
These include an ANC member database, a Cell C customer database, and TransUnion’s own customer database for its identity protection product.
2.1 Assuming you have been invited as a security analyst, tasked with analysing the data breach and advising Transnet on the security systems they should put in place to prevent the data breaches from happening again.
a. Write a comprehensive report to the Chief Information Officer advising him on the policies, tools and security systems that Transnet should put in place to prevent another breach from happening.
(20 marks)
2.2 The increase in cybercrime has not only affected big companies alone. Civilian have continued to fall prey to cybercriminals daily. How can individual South African protect themselves against cyber-crime?
2.1 Report to the Chief Information Officer advising on the policies, tools and security systems that Transnet should put in place to prevent another breach from happening:As a security analyst, the following policies, tools and security systems need to be put in place to prevent another data breach in Transnet:1. Implement Access Control Measures: Transnet must implement access control measures to regulate the flow of people entering their premises. Physical access controls such as smart cards, biometric systems, and cameras should be put in place to monitor who comes in and out of the premises.
The company should also restrict access to sensitive information and ensure employees have access to only the information they need to perform their duties.2. Firewall Implementation: Transnet needs to have firewalls in place to block unauthorized access to their servers and prevent unauthorized individuals from accessing their systems. Firewalls can also be used to prevent malware and other malicious software from entering the company's network.3. Data Encryption: Data encryption can help to prevent unauthorized access to sensitive information in the event of a data breach. Encryption tools should be put in place to encrypt sensitive information such as financial reports and personal data.
4. Regular System Updates and Backups: Transnet should have a policy in place that ensures that all systems are up to date and all security patches are installed to prevent vulnerabilities. In addition, regular data backups should be performed in the event of a data breach or system failure.5. Employee Training: Employees should be trained on the best practices to keep the company's data secure. This includes password management, identifying phishing attacks and other types of cyber threats.6. Incident Response Plan: Transnet should develop an incident response plan that outlines the steps to be taken in the event of a cyber attack. The plan should include who to contact, what steps to take, and how to mitigate the damage.
To know more about Chief Information visit:-
https://brainly.com/question/13013898
#SPJ11
which data model(s) depicts a set of one-to-many relationships?a.)both hierarchical and networkb.)neitherc.)networkd.)hierarchicala.)neitherb.)both hierarchical and networkc.)networkd.)hierarchicala.)hierarchicalb.)both hierarchical and networkc.)networkd.)neithera.)an organization would like to create a movie rating application allowing users to identify what movies they have purchased, what they have watched, and how much they liked a movie.b.)an organization would like to add a rating system to their existing movie rental database. the rating system would be a new feature to be released in the next iteration.c.)an organization would like to create a reporting system off of movie rating databases to poll from on a real-time basis to display results to users on their website.d.)an organization would like to pull the current ratings of movies from different sites to display on their own website, based on the movies that users have selected.a.)nightly backupb.)differential backupc.)full backupd.)incremental backupa.)we can run the backups in batch.b.)we can backup multiple databases at once.c.)we can choose different interfaces based on the database to use.d.)we can backup a remote server.
The correct answers to the multiple-choice questions are as follows: The data model that depicts a set of one-to-many relationships is: d.) hierarchical.
The scenario that best aligns with creating a movie rating application is: a.) an organization would like to create a movie rating application allowing users to identify what movies they have purchased, what they have watched, and how much they liked a movie.
The scenario that best aligns with adding a rating system to an existing movie rental database is: b.) an organization would like to add a rating system to their existing movie rental database. The rating system would be a new feature to be released in the next iteration.
The scenario that best aligns with creating a reporting system off of movie rating databases is: c.) an organization would like to create a reporting system off of movie rating databases to poll from on a real-time basis to display results to users on their website.
The scenario that best aligns with pulling current ratings of movies from different sites is: d.) an organization would like to pull the current ratings of movies from different sites to display on their own website, based on the movies that users have selected.
The type of backup that only includes the data that has changed since the last full backup is: d.) incremental backup.
The statement that is true about backups is: b.) we can backup multiple databases at once.
Please note that these answers are based on the provided options, and there may be other valid considerations or approaches depending on the specific context or requirements.
Learn more about hierarchical here
https://brainly.com/question/28507161
#SPJ11
. EHRs lacking the capability to receive data is a barrier of interoperability and sending health information. a. True b. False Answer: p. 70 9. This was created when the government recognized the need to have a coherent and consistent approach to connecting all the different HIEs and HINs for nationwide interoperability. a. U.S. Interoperability Agreement b. Trusted Exchange Framework and Common Agreement c. HITECH Act d. Cures Act Answer: p. 70 10. Which act was created to prohibit information blocking? a. 21" Century Cares Act b. HITECH Act c. TEFCA d. HIPAA Answer: p 70
The Trusted Exchange Framework and Common Agreement (TEFCA) was created by the government to establish a standardized and consistent approach to connecting various Health Information Exchanges (HIEs) and Health Information Networks (HINs) for nationwide interoperability.
TEFCA aims to promote seamless and secure exchange of health information across different systems and organizations.
The answer is a. 21st Century Cures Act. The 21st Century Cures Act was created to prohibit information blocking in the healthcare industry. Information blocking refers to practices that prevent or hinder the exchange of health information between healthcare providers, patients, and other relevant parties. The act aims to promote interoperability and improve access to health information by addressing barriers and encouraging the sharing of electronic health records (EHRs) and other health data.
Please note that the page numbers provided (p. 70) are not applicable in this context, as they seem to refer to specific references in a book or document.The answer is b. Trusted Exchange Framework and Common Agreement.
Learn more about connecting here
https://brainly.com/question/31378823
#SPJ11
A transaction is a sequence of database operations that access the database.
1.1
List and describe the properties that all database transactions should display
1.2
Briefly discuss the techniques used in transaction recovery procedures.
1.1 Properties that all database transactions should display: Atomicity: A transaction's atomicity assures that it is all or nothing. Consistency: The database's integrity constraints must be satisfied for the transaction to commit. Isolation: A transaction's modifications should not be visible to other transactions until it has been committed.
Durability: The transaction's committed modifications should persist even in the case of a system failure.1.2 Techniques used in transaction recovery procedures: Shadow paging: Shadow paging involves having a shadow copy of the database. It comprises a dirty bit for each page, which indicates if it has been altered during the transaction.
Checkpoints: At intervals, a system can make checkpoints. The log is copied to stable storage and flushed to disk during a checkpoint. In the event of a crash, the database can be restored to the most recent checkpoint, and transactions may be re-applied from the log after the checkpoint. Timestamp ordering: Transaction identifiers and timestamps are used in timestamp ordering to ensure that transactions are ordered correctly.
To know more about transactions visit:
https://brainly.com/question/24730931
#SPJ11
Write a Python program that returns (by printing to the screen) the price, delta and vega of European and American options using a binomial tree. Specifically, the program should contain three functio
To write a Python program that calculates the price, delta, and vega of European and American options using a binomial tree, you can create three functions:
1. `binomial_tree`: This function generates the binomial tree by taking inputs such as the number of steps, the time period, the risk-free rate, and the volatility. It returns the tree structure.
2. `option_price`: This function calculates the option price using the binomial tree generated in the previous step. It takes inputs such as the strike price, the option type (European or American), and the tree structure. It returns the option price.
3. `option_greeks`: This function calculates the delta and vega of the option using the binomial tree and option price calculated in the previous steps. It returns the delta and vega.
Here is an example implementation of these functions:
```
def binomial_tree(steps, time_period, risk_free_rate, volatility):
# Generate the binomial tree using the inputs
# Return the tree structure
def option_price(strike_price, option_type, tree_structure):
# Calculate the option price based on the strike price, option type, and tree structure
# Return the option price
def option_greeks(tree_structure, option_price):
# Calculate the delta and vega of the option based on the tree structure and option price
# Return the delta and vega
# Example usage:
tree = binomial_tree(100, 1, 0.05, 0.2)
price = option_price(50, "European", tree)
delta, vega = option_greeks(tree, price)
# Print the results
print("Option Price:", price)
print("Delta:", delta)
print("Vega:", vega)
```
In this example, the `binomial_tree` function generates a tree with 100 steps, a time period of 1 year, a risk-free rate of 5%, and a volatility of 20%. The `option_price` function calculates the option price for a European option with a strike price of 50. Finally, the `option_greeks` function calculates the delta and vega based on the tree structure and option price. The results are then printed to the screen.
To know more about European visit:
https://brainly.com/question/1683533
#SPJ11
which of the following are ways in which tcp detects congestion? (check all that apply) group of answer choices the destination host sends an icmp message to the sender when the network is congested. congestion is inferred when there are too many timeouts on sent packets. congestion can be detected only after congestion collapse has occurred. tcp monitors the network utilization, and infers congestion when utilization exceeds 80%.
The ways in which TCP detects congestion are: Congestion is inferred when there are too many timeouts on sent packets: When packets are lost or not acknowledged within a certain timeout period, it is an indication of network congestion.
TCP interprets these timeouts as a sign of congestion and adjusts its congestion control mechanism accordingly.
TCP monitors the network utilization and infers congestion when utilization exceeds 80%: TCP keeps track of the network's available bandwidth and compares it with the current utilization. If the utilization exceeds a certain threshold, typically around 80%, TCP assumes that congestion is occurring and reacts by reducing its sending rate.
So the correct options are: Congestion is inferred when there are too many timeouts on sent packets.
TCP monitors the network utilization and infers congestion when utilization exceeds 80%.
Learn more about network here
https://brainly.com/question/1167985
#SPJ11
CENG375-Final-Spring-2021-2022
Question 21
Not yet answered
Marked out of 3.00
Consider the below relational database about Restaurants. Note that an employee can work for more than 1 restaurant.
Employee (employeeSSN, employee-name, street, city, age)
Works (employeeSSN, restaurantID, salary)
Restaurant (restaurantID, restaurant-name, city, managerSSN)
Find the SSNs of employees who work for only 1 restaurant
Select one:
a B) SELECT employeeSSN FROM Works where count(")=1 Group by employeeSSN
b. A and C
c B and C
d A) SELECT employeeSSN FROM Works Group by employeeSSN Having count(*)=1
e Q) SELECT employeeSSN FROM works wl where Not Exists (select employeeSSN from works where employeeSSN=w1.employeeSSN and restaurantID=w1.restaurantID)
Consider the following instance of relation Students:
Students
name
lastname
age
19
18
ID
rim
ismail
123
sara
kamel
ghantous
134
milad
21
1345
tarek
18
12345
dib
Which query produces the below output?
lastname
dib
ghantous
kamel
ismail
a Select lastname from Students order by age desc:
b. Select lastname from Students order by ID
c Select lastname from Students order by ID desc
d None of these
The SSNs of employees who work for only one restaurant can be found using the following query:SELECT employeeSSN FROM Works GROUP BY employee SSN HAVING COUNT(*) = 1So, the correct option is (d) A) SELECT employeeSSN FROM Works GROUP BY employee SSN HAVING COUNT(*) = 1.
Given the database about restaurants, we have to find the SSNs of employees who work for only 1 restaurant. The Works table contains the employeeSSN and the restaurantID, so we need to group by employeeSSN and count the number of restaurants each employee works for. The HAVING clause filters out the employees that work for more than one restaurant. So, the correct SQL query to get the desired result is:SELECT employeeSSN FROM Works GROUP BY employeeSSN HAVING COUNT(*) = 1;This query returns the employeeSSNs that appear only once in the Works table. These are the employees that work for only one restaurant.
The correct option is (d) A) SELECT employeeSSN FROM Works GROUP BY employeeSSN HAVING COUNT(*) = 1.Now, let's look at the second part of the question. We have a Students table with columns name, lastname, age, and ID. We are asked to find the query that produces a list of last names sorted in a specific order. The expected output is:lastname dibghantouskamelismailTo get this result, we need to sort the rows by ID in ascending order. We can do this with the following query:SELECT lastname FROM Students ORDER BY ID;However, this query does not produce the desired output because the rows are sorted by ID, not by age. So, the correct option is (b) Select lastname from Students order by ID.
To know more about employee visit :
https://brainly.com/question/12869455
#SPJ11
\( \mathcal{H} \)-Given the language: \[ L_{8}=\left\{0^{m}(101)^{n} \mid m, n \in \mathbb{Z} \text { and } m, n \geq 1 \text { and } m \geq n\right\} \] Is \( L_{8} \) Regular? Circle the appropriate
Because L8 violates the pumping lemma for regular languages, we can conclude that L8 is not regular.
No, the language L8 is not regular. A regular language can be recognized by a finite state automaton (FSA), which has a finite number of states and reads symbols from an input string to determine acceptance or rejection.
However, L8 violates the pumping lemma for regular languages, providing evidence that it is not regular.
The pumping lemma states that for any regular language L, there exists a pumping length p such that any string in L with a length of at least p can be divided into five parts: u, v, w, x, and y.
These parts satisfy three conditions: 1) vwx is the same as the original string, 2) v and x together have a length of at most p, and 3) for any natural number k, the string uv^kwx^ky is also in L.
In the case of L8, consider the string 0101101, where m = 3 and n = 2. According to the language definition, this string should be in L8. However, if we try to apply the pumping lemma, we run into a contradiction.
Since the string has a length of 7, which is less than p, we cannot divide it into five parts that satisfy the pumping lemma conditions.
For more such questions on lemma,click on
https://brainly.com/question/30819932
#SPJ8
The Probable question may be:
Given the language:L8= {0 (101)" m, ne Z and m, n > 1 and m>n}
Is Lg Regular? Circle the appropriate answer and justify your answer.
1) Ethernet and Wi-Fi systems operate in the data link layer and they share many protocols from higher layer.
A. True
B. False
2) Virtual Private Network (VPN) physically splits the network into subnetworks to improve the network bandwidth and to better utilize the IP space.
A. True
B. False
Ethernet and Wi-Fi systems operate in the data link layer and they share many protocols from higher layer is True. Ethernet and Wi-Fi systems operate in the data link layer, and they share many protocols from higher layer is a true statement.
They are two different types of local area network (LAN) technologies used to connect computers, servers, and other hardware devices to create a network. The Data Link layer controls the physical transmission of data on the network cables or Wi-Fi signals.2) Virtual Private Network (VPN) physically splits the network into subnetworks to improve the network bandwidth and to better utilize the IP space is False.
The statement, Virtual Private Network (VPN) physically splits the network into subnetworks to improve the network bandwidth and to better utilize the IP space, is false. A VPN is a secure and encrypted connection between two networks or devices that is made over the internet. VPNs provide a secure connection over an unsecured network and can be used to connect remote workers to a company network or to connect two geographically distant networks.
To know more about Wi-Fi visit:
https://brainly.com/question/32802512
#SPJ11
CS11 - Contains - Write a function called contains. The function should take two arguments. • item: a string to search for in the second parameter • collection : either a list or a tuple The function should return a boolean denoting whether or not the item can be found within the collection. If either parameter is the wrong type, your function should return None.
The code implementation for the function called `contains` is shown below: def contains(item, collection).
The function takes two parameters, `item` and `collection`. The function checks the type of the `collection` parameter to ensure that it is either a `list` or `tuple`, and the `item` parameter is of type `str`.The `contains` function returns a `boolean` indicating whether or not the `item` can be found within the `collection`.
It does this by checking if `item` is present in `collection`. If `item` is present in `collection`, it returns `True`; otherwise, it returns `False`.In the event that either parameter is of the wrong type, the function returns `None`.
To know more about code visit :
https://brainly.com/question/30391554
#SPJ11
Python Only**
use fruitful branching recursion
Part B: tree {#partB .collapse}
In this part, you will write a four-parameter function called tree that draws branching trees and returns the total length of all branches and leaves in the tree. These tree examples demonstrate how it should work.
In the tree, everything starts with a trunk (which might end up being the branch of a larger tree), and the first parameter of the tree function specifies the length of the trunk. The next parameter specifies the number of layers of branches and leaves above the trunk, in each layer the tree splits into two parts, drawn 40° left and 40° right of the angle of the trunk. These parts have trunk lengths which are 60% of the original trunk length, and each has one less layer below it.
The last two parameters specify the trunk/branch color and the leaf color respectively: all branches are drawn using the first color and all leaves are drawn using the second color. Whenever the number of layers is 0, a leaf is drawn instead of a trunk. A leaf is a line of the given trunk length where the pen size is set to 1/2 of that length. For all other parts of the tree, the pen size is set to 1/10 of the trunk length.
Note that the trunk draws in whatever direction the turtle is facing when the function starts, and the function must return the turtle to this starting position when it is done.
A few important restrictions:
tree must be recursive, and it must not use any loops. For full credit, it should have exactly two recursive calls.
You must call pencolor to set the pen color and call pensize to set the pen size within tree (the pen size is 1/10th of the trunk length, except for leaves where it is 1/2 of the length).
For the test file to work correctly, you must draw each branch & leaf only once (as opposed to drawing it forward and backwards, even if this would look the same). You must also draw the leaves after the branches they're connected to, so that the leaves are drawn on top of the branches
Define tree with 4 parameters
Use def to define tree with 4 parameters
Do not use any kind of loop
Within the definition of tree with 4 parameters, do not use any kind of loop.
Call tree
Within the definition of tree with 4 parameters, call tree in at least one place.
Call pensize
Within the definition of tree with 4 parameters, call pensize in at least one place.
Call pencolor
Within the definition of tree with 4 parameters, call pencolor or color in at least one place.
The `tree` function draws branching trees and returns the total length of all branches and leaves in the tree. Here is the definition of the `tree` function with four parameters:```python
import turtle
import math
def tree(trunk_length, num_layers, trunk_color, leaf_color):
t = turtle.Turtle()
if num_layers == 0:
t.pencolor(leaf_color)
t.pensize(trunk_length / 2)
t.forward(trunk_length)
length = trunk_length
else:
t.pencolor(trunk_color)
t.pensize(trunk_length / 10)
t.forward(trunk_length)
t.left(40)
length1 = tree(trunk_length * 0.6, num_layers - 1, trunk_color, leaf_color)
t.right(80)
length2 = tree(trunk_length * 0.6, num_layers - 1, trunk_color, leaf_color)
t.left(40)
length = length1 + length2 + trunk_length
t.penup()
t.backward(trunk_length)
t.pendown()
return length
```
In this function, the turtle moves forward and turns at a 40 degree angle to create the branching effect of the tree. The function stops when the `num_layers` variable is 0, at which point it draws a leaf instead of a trunk. The function uses recursion to call itself to draw smaller branches until it reaches the leaf.In the function, we've also used the `pencolor` and `pensize` methods to set the color and thickness of the pen. The `penup` and `pendown` methods are also used to move the pen without drawing lines and to start drawing lines again when necessary. Finally, the function returns the total length of all branches and leaves in the tree.
To know more about color visit:-
https://brainly.com/question/32142070
#SPJ11
b1 = [7, 5, 9, 6]
b1 = sorted(b1)
b2 = b1
b2.append(2)
print(b1, b2)
What is the output? Please explain why.
The output of the given code is [5, 6, 7, 9, 2] [5, 6, 7, 9, 2].The given program initializes a list `b1` with values [7, 5, 9, 6]. It then sorts the list and assigns it to `b2`.Finally, it appends the value 2 to `b2`.`b1` and `b2` are pointing to the same list.
Therefore, when we append an item to `b2`, it is also appended to `b1`.Here is a detailed explanation of the program:1. The list `b1` is initialized to [7, 5, 9, 6].2. The `sorted()` function is applied to `b1` to sort its elements in ascending order. The resulting list is assigned to `b2`.The sorted list is [5, 6, 7, 9].3.
The `append()` method is used to add the value 2 to the end of `b2`. `b2` is now [5, 6, 7, 9, 2].4. Here is a detailed explanation of the program:1. The list `b1` is initialized to [7, 5, 9, 6].2. The `sorted()` function is applied to `b1` to sort its elements in ascending order. The resulting list is assigned to `b2`.The sorted list is [5, 6, 7, 9].3. The print statement outputs the values of `b1` and `b2`. Since they are both pointing to the same list, they have the same values: [5, 6, 7, 9, 2].
To know more about program visit:
https://brainly.com/question/14368396
#SPJ11
How do rewrite but still have the same logic ? I want to know how many ways it can be written.
void run_first_course(FILE *ofp, failfish_queue **ponds)
{
fprintf(ofp, "\nFirst Course\n");
for (int i = 0; i < 10; i++)
{
if (ponds[i] != NULL)
{
fprintf(ofp, "\nPond %d: %s\n", i + 1, ponds[i]->pondname);
first_course(ofp, ponds[i]);
}
}
}
There are multiple ways of rewriting the given function while still having the same logic. One of the ways is shown below:void run_first_course(FILE *ofp, failfish_queue **ponds) {fprintf(ofp, "\nFirst Course\n");
int i = 0;while(i < 10 && ponds[i] == NULL) i++;if(i < 10) {fprintf(ofp, "\nPond %d: %s\n", i + 1, ponds[i]->pondname);first_course(ofp, ponds[i]);}} In the given function, the for loop is used to iterate through an array of 10 elements. Then the if statement checks if the current element is not NULL and if it is not, then the function first_course() is called.
If the current element is NULL, then the for loop continues with the next iteration.In the rewritten function, the for loop is replaced with a while loop. The while loop first checks if the index is less than 10 and the element at that index is NULL. If the element is NULL, then the index is incremented by 1. This continues until a non-NULL element is found or the index becomes 10. Then, if a non-NULL element is found, the function first_course() is called on that element and the loop ends. Otherwise, the loop ends without calling the function. Hence, the logic remains the same but the structure of the loop is different.
To know more about function visit:
https://brainly.com/question/21145944
#SPJ11
Write one paragraph on each chapter 1 and 2 (at least five grammatically correct complete sentences in each paragraph for each chapter) on what you learned in Module 1. It should be your reflection of the material you read. Which new concepts did you learn, what surprised you the most and how will you apply these new concepts in your personal and work life. You can write more than one paragraph.
Chapter 1: Supervision: Tradition and Contemporary Trends :
Define what a supervisor is, Summarize research findings that have led to basic ideas of what managers should do. Describe the basic types of supervisory skills. Describe how the growing diversity of the workforce affects the supervisor's role. Identify the general functions of a supervisor. Explain how supervisors are responsible to higher management, employees, and co-workers. Describe the typical background of someone who is promoted to supervisor. Identify characteristics of a successful supervisor
Chapter 2: The Supervisor as Leader:
Discuss the possible link between personal traits and leadership ability, Explain democratic vs. authoritarian leadership. Explain major leadership theories, Identify criteria for choosing a leadership style. Explain how supervisors can develop and maintain good relations with their employees, managers, and peers.
Chapter 1: Supervision: Tradition and Contemporary Trends provides an overview of supervision, including its evolution, necessary skills, and the changing role due to workforce diversity.
Chapter 2: The Supervisor as Leader discusses effective leadership qualities, styles, theories, and the importance of communication and relationship-building.
Chapter 1: Supervision: Tradition and Contemporary TrendsChapter 1 provides an overview of what supervision is, how it has evolved over time, and what skills are needed to be a successful supervisor. A supervisor is responsible for overseeing a group of employees and ensuring that they are completing their tasks effectively. Research has shown that managers should be able to plan, organize, lead, and control to be successful. Supervisory skills include technical, human, and conceptual skills. The growing diversity of the workforce has changed the role of the supervisor, and it is now important for them to understand and respect cultural differences. Supervisors are responsible to higher management, employees, and co-workers, and must balance their responsibilities to each group. Successful supervisors are typically promoted from within the organization and have a strong work ethic and communication skills.
Chapter 2: The Supervisor as LeaderChapter 2 discusses the qualities of effective leaders and the different types of leadership styles. Personal traits such as confidence, intelligence, and integrity can contribute to leadership ability, but leadership can also be learned and developed. Democratic leadership involves sharing decision-making power with employees, while authoritarian leadership involves a more top-down approach. Major leadership theories include trait theory, behavioral theory, and contingency theory. The best leadership style depends on the situation and the needs of the employees. To develop and maintain good relationships with employees, managers, and peers, supervisors must be open and honest in their communication, provide feedback and recognition, and lead by example.
Learn more about communication here :-
https://brainly.com/question/29811467
#SPJ11
Consider the following declarations, which appear in the main() function of a program. uint32_t x = 100; uint32_t* y = &x; (a) The statement std::cout << y << std::endl; prints which of the following? A. the value of x B. the type of x C. the size of x in bytes D. the memory address of x (b) The statement
std::cout << *y << std::endl; prints which of the following? A. the value of x B. the type of x C. the size of x in bytes D. the memory address of x (c) Which property of x may change during its lifetime? A. the value of x B. the type of x C. the size of x in bytes D. the memory address of x
(a) function of a program The statement `std::cout << y << std::endl;` prints the memory address of x.The declaration `uint32_t* y = &x;` declares a pointer y that holds the address of x.
(b) The statement `std::cout << *y << std::endl;` prints the value of x.The declaration `uint32_t* y = &x;` declares a pointer y that holds the address of x. In this case, using the `*` operator in front of `y` dereferences the pointer, giving the value of x.(c) The value of x may change during its lifetime.
The value of x may change during its lifetime. In this case, x is declared as a uint32_t variable and is assigned a value of 100. The value of x can be changed by updating its value during runtime. Therefore, the value of x can change during its lifetime.
To know more about function of a program visit:
https://brainly.com/question/31845388
#SPJ11
PROJECT
7 ProjectID
Name
Department
MaxHours
StartDate
EndDate
ASSIGNMENT
DEPARTMENT
ProjectID
EmployeeNumber HoursWorked
DepartmentName
BudgetCode OfficeNumber
Phone
EMPLOYEE
EmployeeNumber
FirstName
LastName
Department
Phone
Email
Create a query that will list all projects sorted by their starting date (starting from the earliest).
To create a query that will list all projects sorted by their starting date (starting from the earliest), the SQL code should be as follows:
SELECT * FROM PROJECT ORDER BY StartDate;Note: It is assumed that the three tables (PROJECT, ASSIGNMENT, and EMPLOYEE) are already created in the database and contain the fields (columns) mentioned in the question.ProjectThe PROJECT table has the following fields:ProjectIDNameDepartmentMaxHoursStartDateEndDateASSIGNMENTThe ASSIGNMENT table has the following fields:DepartmentProjectIDEmployeeNumberHoursWorkedDEPARTMENTThe DEPARTMENT table has the following fields:DepartmentNameBudgetCodeOfficeNumberPhoneEMPLOYEEThe EMPLOYEE table has the following fields:EmployeeNumberFirstNameLastNameDepartmentPhoneEmail
To list all projects sorted by their starting date in a query, you can use the following SQL statement:
```sql
SELECT *
FROM PROJECT
ORDER BY StartDate ASC;
```
This query selects all columns from the "PROJECT" table and sorts the result based on the "StartDate" column in ascending order. As a result, you will get a list of all projects sorted from the earliest starting date to the latest.
To know more about visit:
https://brainly.com/question/31905652
#SPJ11
.What’s the difference in behavior between the To and the From property of the MailMessage class?
The To property is a string that specifies the address of the recipient of an email message. The From property, on the other hand, is a string that specifies the address of the sender of an email message.
The difference in behavior between the To and the From property of the Mail Message class are listed below:The To property sets the email address of the recipient of an email message. This field is required and should contain a valid email address.
You can assign a single email address or multiple email addresses separated by semicolons to the To property.The From property sets the email address of the sender of an email message. This field is also required and should contain a valid email address. When you send an email message, the email client displays the address in the From field.
To know more about email visit
https://brainly.com/question/31591173
#SPJ11
You will design a program that manages student records at a university. You will need to use a number of concepts that you learned in class including: use of classes, use of dictionaries and input and output of comma delimited csv files. Input: a) Students MajorsList.csv - contains items listed by row. Each row contains student ID, last name, first name, major, and optionally a disciplinary action indicator b) GPAList.csv -- contains items listed by row. Each row contains student ID and the student GPA. c) GraduationDatesList.csv-contains items listed by row. Each row contains student ID and graduation date. Example Students MajorsList.csv, GPAList.csv and Graduation DatesList.csv are provided for reference. Your code will be expected to work with any group of input files of the appropriate format. Names, majors, GPAs and graduation dates can and will likely be different from the examples provided. You can reuse parts of your code from Part 1. Required Output: 1) Interactive Inventory Query Capability a. Query the user of an item by asking for a major and GPA with a single query. i. Print a message("No such student") if the major is not in the roster, more that one major or GPA is submitted. Ignore any other words, so "smart Computer Science student 3.5" is treated the same as "Computer Science 3.5". ii. Print "Your student(s):" with the student ID, first name, last item, GPA. Do not provide students that have graduated or had disciplinary action. List all the students within 0.1 of the requested GPA. iii. Also print "You may, also, consider:" and provide information about the same student type within 0.25 of the requested GPA. Do not provide students that have graduated or had disciplinary action. iv. If there were no students who satisfied neither ii nor iïi above - provide the information about the student within the requested major with closest GPA to that requested. Do not provide students that have graduated or had disciplinary action V. After output for one query, query the user again. Allow 'q' to quit. 3 1 2. 3 4. 5 6 7 8 А B 305671 Jones 987621 Wong 323232 Rubio 564321 Awful 769889 Boy 156421 McGill 999999 Genius C D E F Bob Electrical Engineering Chen Computer Science Marco Computer Information Systems Student Computer Y Sili Computer Y Tom Electrical Engineering Real Physics A B 1 2 3 156421 305671 323232 564321 769889 987621 999999 3.4 3.1 3.8 2.2 3.9 3.85 4. 5 6 7 8 4 1 2 3 А B 999999 6/1/22 987621 6/1/23 769889 6/1/22 564321 6/1/23 323232 6/1/21 305671 6/1/20 156421 12/1/22 4 5 6 7 o
Program design that manages student records at a university. The program should have the following features: Input: a) The Students MajorsList.csv file contains entries arranged by row. Each row includes the student's ID, last name, first name, major, and (optionally) a disciplinary action indicator.
The GPAList.csv file contains entries arranged by row. Each row includes the student's ID and GPA. The GraduationDatesList.csv file contains entries arranged by row. Each row includes the student's ID and graduation date. Example Students MajorsList.csv, GPAList.csv and Graduation DatesList.csv are provided for reference. Your code will be expected to work with any group of input files of the appropriate format. Names, majors, GPAs and graduation dates can and will likely be different from the examples provided. You can reuse parts of your code from Part 1. Required Output: 1) Interactive Inventory Query Capability a.
Query the user of an item by asking for a major and GPA with a single query. i. Print a message("No such student") if the major is not in the roster, more that one major or GPA is submitted. Ignore any other words, so "smart Computer Science student 3.5" is treated the same as "Computer Science 3.5". ii. Print "Your student(s):" with the student ID, first name, last item, GPA. Do not provide students that have graduated or had disciplinary action. List all the students within 0.1 of the requested GPA. iii. Also print "You may, also, consider:" and provide information about the same student type within 0.25 of the requested GPA.
To know more about Program design visit:-
https://brainly.com/question/29589017
#SPJ11
PLEASE HELP, THIS IS FROM FLVS AND THE SUBJECT IS SOCAL MEADA. YES THAT IS A CORSE.
Josh frequently posts in an online forum to talk about his favorite video game with other players. For the past few weeks, a poster he doesn't know has been harassing Josh in the forums, calling him names and publicly posting hateful messages toward Josh with the intent of starting an argument.
In this situation Josh should consider changing his forum screen name to avoid this cyberbully.
1. True
2. False
