Answer:
this is answer
Explanation:
Cls
for i =1 to 5
input "enter the name";n$
print n$
next i
end
dry air will break down if the electric field exceeds about 3.0×106v/m.What amount of charge can be placed on a capacitor if the area of each plate is 8.8 cm^2?
If the electric field surpasses 3.0106v/m, dry air will degrade. If a capacitor's plates have an area of 8.8 cm2 apiece, it can hold a charge of 23.364 nC.
The charge of the capacitor is
Q=CV
= (ε₀A/d)(Ed)
Q=ε₀EA
The amount of charge that can be placed on a capacitor is,
Q=ε₀EA
=(8.85×10⁻¹²Nm²/C²)(3×10⁶ V/m)(8.8×10⁻⁴ m²)
=23.364×10⁻⁹
= 23.364 nC
The electric field is mathematically defined as a vector field that can be associated with each point in space, representing the force per unit charge exerted on a positive test charge at rest at that point.
The electric charge or time-varying magnetic fields produce the electric field. The electric field is responsible for the attractive forces that hold the atomic nucleus and electrons together at the atomic scale.
Gauss' law states that the total electric flux out of a closed surface is equal to the charge enclosed divided by permittivity. Or, the total flux associated with a surface is one-tenth of the charge enclosed by the closed surface.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ4
Calculate the polar radius of gyration of the shaded area about its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = ... mm
The shaded area's polar radius of gyration around its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = 253 mm.
The difference between the area of the complete polygon and the area of the unshaded portion inside the polygon is the area of the shaded region. There are two methods for the area of the shaded component to appear in polygons. The darkened area can be found either in the polygon's centre or on one of its sides. You might occasionally be necessary to determine the size of shaded areas. The area of the shaded zone is often calculated by deducting the area of a smaller inner form from the area of a larger outer shape. "Sector" of a circle is represented by the darkened area. A sector is the area of a circle that is bounded by two radii and an arc.
Learn more about shaded area here
https://brainly.com/question/13515841
#SPJ4
Can you label the steps of energy production at a coal-fired power plant? Moving clockwise, label the steps of energy production in this diagram of a coal-fired power plant.
1. Coal is burned in the furnace
2. Heat from combustion boils water
3. Steam turns the turbine
4. Magnets are moved past copper coils to generate current
5. Steam is cooled and condensed
6. Air pollutants are filtered out
7. Toxic ash is taken to a hazardous waste disposal site
Label the steps involved in producing energy in this illustration of a coal-fired power plant in a clockwise direction.
1). Firstly, the furnace burns coal.
2). Heat from burning causes water to boil.
3). Steam drives the turbine.
4). In order to produce current, magnets are moved past copper coils.
5). Condensed steam is cooled.
6). Filters are used to remove air contaminants.
7). Toxic ash is transported to a disposal facility for hazardous waste.
Energy is the ability to conduct work in physics. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other forms. Additionally, there is heat and work, which is energy moving from one body to another. Energy is always identified in accordance with its nature once it has been transferred. Therefore, the heat transported may manifest as thermal energy while work performed may result in mechanical energy.
Motion is a property of all energies. Anybody in motion, for instance, possesses kinetic energy. Even while at rest, a tensioned object like a spring or bow has the capacity to move; this is because of the way it is built.
Learn more about Energy here:
https://brainly.com/question/10501228
#SPJ4
Question Suppose we have a business operating in six cities around the Pacific Rim: San Diego; San Francisco_ Tokyo, Shanghai, Manila, and Honolulu: We are interested in counting the number of ways wC can travel from one city to another with at most n stopovers We look up all the direct flights and put them in table: San Diego 17 San Francisco San Francisco / San Diego. Tokyo; Shanghai, Manila; Honolulu Tokyo San Francisco, Shanghai, Manila Shanghai San Diego; San Francisco, Tokyo, Manila Manila Tokyo, Shanghai, Honolulu Honolulu San Francisco, Shanghai, Manila. Let's say we want to get from San Diego to Manila with at most three stops along the way: For example, the trip going from San Diego through San Franeisco, then Honolulu; then Shanghai, then Manila is a trip with exactly three stops_ 5.1 Use Matlab to list all possible ways to get from San Diego to Manila with exactly three stops_
During domestic layovers, you are permitted to leave the airport. For instance, it is acceptable and safe to exit the airport if you are a US citizen and have a stopover inside the nation.
It's simple. Use Skyscanner's multi-city flight search feature to book and travel to several locations with just one easy search by selecting "multi-city" instead of "roundtrip" or "one way." Additionally, it's a terrific method to find the top discounts. Although these words are frequently used in the same sentence, they do not mean the same thing. The period of time between two flights known as a layover is spent at the airport. The next aircraft on your itinerary that you are awaiting to board at the airport is known as a connecting flight.
To learn more about stopover click the link below:
brainly.com/question/14799250
#SPJ4
Approximately 12% of men have a type of colorblindness that prevents them from
distinguishing between red and green. If 3 men are selected at random, find the probability
that all of them will have this type of red-green colorblindness.
The probability that all 3 men have red-green colorblindness is 0.0017 or 0.17%
How to find the probability?The probability that a randomly selected man has red-green colorblindness is 0.12.
If we want to find the probability that all 3 selected men have this type of colorblindness, we can multiply the probability of a single man having it (0.12) by itself 3 times.
So the probability that all 3 men have red-green colorblindness is:
0.12 * 0.12 * 0.12 = 0.001728 ≈ 0.0017 or 0.17%
Read more about probability here:
https://brainly.com/question/24756209
#SPJ1
Find the number of vertices, the number of edges, and the degree of each vertex in the given undirected graph. Identify all isolated and pendant vertices.
The vertices based on the information will be:
1. 6 vertices, 1 pendant vertex(c), 1 isolated vertex(d),6 edges
2. 5vertices,15 edges, 0 isolated vertex, 0 pendant vertex
3. 9 vertices,2 isolated,0 pendant,12 edges
What is the vertex?Vertex is a node in graph and represented as dot or circle in the diagram
Degree is the total number of of edges through a vertex is known as degree (In a undirected graph, a self-loop adds two to the node's degree)
An isolated vertex is a vertex with degree zero
An pendant vertex is a vertex with degree 1. It can also be refered to as leaf node.
Learn more about vertex on
https://brainly.com/question/21191648
#SPJ1
how to use delaman tire air compressor, air compressor 12v portable mini air compressor electric tire inflator pump 12 volt car 300 psi
To use the Delaman Tire Air Compressor, Air Compressor 12V Portable Mini Air Compressor Electric Tire Inflator Pump 12 Volt Car 300 PSI, first plug the compressor into a 12-volt power source.
Check the pressure gauge on the compressor to make sure it is at the desired pressure setting. Attach the air hose of the compressor to the valve stem of the tire. Turn the air compressor on and wait until the tire is inflated to the desired pressure level. Turn the air compressor off and disconnect the air hose from the tire. Check the tire pressure with a tire pressure gauge to make sure it is at the correct pressure.
Learn more about Air Compressor:
https://brainly.com/question/13080807
#SPJ4
what allows an arch bridge to span greater distances than a beam bridge, or a suspension bridge to stretch over a distance seven times that of an arch bridge
The answer rests in how each style of bridge handles compression and tension, two significant stresses.
At 17.61 kilograms, the arch bridge collapsed, followed by the truss at 11.23 kilograms and the suspension at 14.86 kilograms. The test's findings indicate that the experiment may be reproduced digitally and that the arch bridge design performs best in the particular conditions of this experiment. Because the voussoirs are forced together rather than apart by downward pressure, an arch is able to support a much heavier weight than a horizontal beam of the same size and material. The supports of the arch must withstand the ensuing outward thrust.
Learn more about stresses here-
https://brainly.com/question/30128830
#SPJ4
In approximately 50 words, explain how to fast track the construction of a hospital and what type of construction firm would be best suited for the project.
The 25-kg bar has a center of mass at G. If it is supported by a smooth peg at C, a roller at A, and cord AB, determine the reactions at these supports.
A fixed support that is to a structure restricts all rotations and movements at that location.
There are six support responses applied from the fixed support to the structure since the joint with fixed support has no degrees of freedom. R (externally independent) (externally independent) Support for a There are three possible reactions at a engine. The term "ball and socket joint" is another name for the support. A built structure is often connected to its base using one of three basic types of connections: roller, pinned, and fixed. A simple support is a fourth form that is uncommon in building constructions. This is frequently as having no friction.
Learn more about engine here-
https://brainly.com/question/27162243
#SPJ4
(a) Since the original solution also uses Pb and Vb (implemented using busy-waiting), why is the above solution much worse in terms of performance
Process scheduling that is based on priority is called priority scheduling. The scheduler chooses the jobs to complete according to priority in this algorithm.
The processes that are more important should be completed first, and tasks with equal importance should be completed in a round-robin or FCFS fashion. Priority is determined by factors like memory and time constraints. The CPU has been assigned to a certain process in this kind of scheduling approach. The activity that occupies the CPU will free it by changing context or ceasing. The only approach that works on a variety of hardware platforms is this one. That's because, unlike preemptive scheduling, it doesn't require specialized hardware (like a timer).
Learn more about specialised here-
https://brainly.com/question/28114678
#SPJ4
The air gap of an automotive air-conditioning compressor is the space between the
clutch assembly and the air-conditioning pulley.
true
false
The given statement is TRUE.
Why is this true?In an automotive air-conditioning system, the compressor is responsible for compressing and circulating refrigerant.
The compressor is typically driven by the engine through a belt and pulley system. The air gap is the space between the clutch assembly, which connects and disconnects the compressor from the engine, and the air-conditioning pulley, which is connected to the compressor and driven by the belt.
The purpose of the air gap is to provide clearance between these two components, which allows the clutch to disengage and the compressor to spin freely when the air-conditioning system is not in use.
Read more about air gap here:
https://brainly.com/question/14752856
#SPJ1
Problem 5.1Vectors: FA ,Bx, ByPart A Draw the free-body diagram for the cantilevered beam. A is the a fixed support.Draw the vectors starting at the black dots. The location and orientation of the vectors will be graded. The length of the vectors will not be graded. Double-click on the black dot to indicate the direction of the moment. To change the direction click on the dot one more time.add elementv vector sum delete element attributes 5 reset ? help 6 kN 30° 1.5 m 4 kN -1.5 m→トー1.5 m
Starting with the black dots, draw the vectors. The vectors' position and orientation will be rated. The vectors' lengths won't be graded.
What exactly is a cantilevered building?A projecting volume or girder that is joined to a building at just one end is called a cantilever. Although they have been extensively utilized in bridge design for many years, they are still used in a variety of ways in modern structures.
How do cantilever walls work?Reinforced concrete is used to construct cantilever walls, and an L-shaped (or inverted T-shaped) foundation is used. By transferring the vertical tension behind the wall onto the foundation, the toppling caused by earth pressure lateral generated by the same soil mass is avoided.
To know more about cantilevered visit:
https://brainly.com/question/13254986
#SPJ4
the baxter laboratory building acts like a cable-stayed bridge in the way the roof is supported. group of answer choices true false
The statement 'the baxter laboratory building acts like a cable-stayed bridge in the way the roof is supported' is true.
The Baxter Laboratory Building is a unique structure, acting like a cable-stayed bridge in the way the roof is supported.
Unlike traditional bridges, where the cables are connected to an abutment or pillar, the Baxter Laboratory Building has its cables connected directly to the roof, creating an arch-like structure.
This unique construction style allows for greater stability and load-bearing capabilities, making the Baxter Laboratory Building a truly remarkable structure.
The roof is held up by pillars, which are connected to the roof with cables. This design helps to reduce the weight of the roof, making it easier to support and increasing its strength.
To learn more about roof, click here:
https://brainly.com/question/17589120
#SPJ4
Which battery cable is bolted to the vehicle frame to allow the metal structure of the vehicle to serve as a large conductor to carry current?
Answer:
The Negative battery cable is used to bolt the vehicle frame to allow the metal structure of the vehicle to serve as a large conductor to carry current.
Explanation:
Battery cable is large automotive cable. Like smaller types of automotive wire, it is available in PVC and cross-linked forms. Click here to read an earlier post explaining the differences between PVC and cross-linked wire insulation.
One type of PVC battery cable is SGT cable. It is rated to 80°C and therefore can be used in starters or battery grounds. Cross-linked battery cables can also be used in starter and battery ground applications, and they are more resistant to heat, abrasion, and aging than PVC cable.
Two types of cross-linked battery cable are SGX and STX. They are rated to 125°C. Of the three types of battery cable (SGT, SGX, amd STX), STX has the thinnest wall, making it a popular choice for automotive applications with limited space.
To learn more about this visit the link:
https://brainly.com/question/26923743
https://brainly.com/question/29354736
a chemical fume hood is a primary engineering control. which of the following describes how it works with the building exhaust system?: a. all air in the fume hood is exhausted outside of the building b. all air in the fume hood is filtered and recycled back into the lab c. all air in the fume hood is filtered and recycled back into the building air supply d. none of the above
The exhaust system collects exhaust gases from the cylinders, removes pollutants, reduces noise levels, and directs the purified exhaust gases away from the occupants at appropriate locations within the vehicle.
What is Exhaust system?Depending on the engine, the exhaust system consists of he one or he two channels. Flow resistance should be chosen so that exhaust back pressure has as little impact on engine performance as possible.
For an exhaust system to work properly, it must be thought of as a whole and developed accordingly. This means that the component must be matched by the designer to be specific to the vehicle and engine.
All internal combustion engines produce an "exhaust noise" due to the pulsating ejection of gases from the cylinders. This noise should be attenuated by reducing the acoustic energy of the exhaust stream.
Therefore, The exhaust system collects exhaust gases from the cylinders, removes pollutants, reduces noise levels, and directs the purified exhaust gases away from the occupants at appropriate locations within the vehicle.
To learn more about exhaust system, refer to the link:
https://brainly.com/question/12961501
#SPJ1
A system of parallel, non-concurrent forces acting on a body can be reduced to which of the following:
A. One resultant force and one resultant moment acting at any point on the body
B. One resultant force acting at a specific point on the body
C. Both of the above
D. None of the above
A system of parallel, non-concurrent forces acting on a body can be reduced by One resultant force and one resultant moment acting at any point on the body and One resultant force acting at a specific point on the body. Thus, C. Both of the above is correct.
What is non-concurrent forces?Two or more forces that share a common line of action but have equal magnitudes but act in opposite directions are said to be non-concurrent forces. In plain English, this means that a system of forces is said to be non- concurrent when its components do not intersect at a single point. A concurrent force system, however, has a common point through which all forces pass.
Combined forces that don't add up to zero are considered non-concurrent forces. The fact that a couple's line of action does not intersect at one point makes them an example of a non-concurrent force. When it comes to mechanics, a couple is a system of forces with a resultant (net, or sum) moment but no resultant force.
Learn more about non-concurrent force
https://brainly.com/question/15103668
#SPJ4
Let P(n) be the statement that 1^3 + 2^3 + 3^3 + + n^3 = (n(n+1)/2)^2 for the positive integer n. What is the statement P(1)? Show that P(1) is true, completing the basis step of the proof. What is the inductive hypothesis? What do you need to prove in the inductive step?Complete the inductive step, identifying where you use the inductive hypothesis.
One must first assume the inductive hypothesis for n before using that assumption to demonstrate that the assertion is true for n + 1. This is known as the induction step.
What does inductive reasoning in math class 11 mean?This means that the assertion P(n) is true for n = k + 1 if and only if the supplied statement holds true for some prime number k. This is sometimes referred to as the "inductive step," and the "inductive hypothesis" is the presumption because P(n) is valid for n=k.
What does induction mean exactly?Electromagnetic induction, or simply induction, is the technique of creating electrical charge in a conductor by exposing the conductor to a fluctuating magnetic field.
To know more about induction visit:
https://brainly.com/question/29525504
#SPJ4
describe one type of plate boundary found on earth.
There is a diverging border formed when two tectonic plates separate. Earthquakes frequently happen at these borders as magma (molten rock) flows from the Earth's mantle to the top and solidifies to create fresh oceanic crust.
The widely recognized scientific hypothesis that the Earth's lithosphere is composed of a number of massive tectonic plates that have been gently moving since about 3.4 billion years ago is known as Platonic movement (from the Late Latin: tectonicus, from the Ancient Greek: v, lit. "pertaining to construction"). The continental drift theory, which was developed in the early 20th century, is the foundation of the model. Following the confirmation of seafloor spreading in the mid- to late 1960s, plate tectonics became widely accepted by geoscientists. According on how they are defined, the solid outermost shell of the planet, known as the lithosphere, is divided into seven or eight large plates, as well as several smaller plates or "platelets." The kind of plate boundary—convergent, divergent, or transform—determines where the plates converge. Along these plate boundaries, earthquakes, volcanic activity, mountain-building, and the creation of oceanic trenches all occur (or faults). The relative motion of the plates normally varies between 0 and 10 cm every year.
Learn more about tectonic plates here
https://brainly.com/question/1162125
#SPJ4
A long 35-cm-diameter cylindrical shaft made of stainless steel 304 (k = 14. 9 W/m2·K, rho = 7900 kg/m3 , cp = 477 J/kg·K, and α = 3. 95 × 10-6 m2 /s) comes out of an oven at a uniform temperature of 500°C. The shaft is then allowed to cool slowly in a chamber at 150°C with an average convection heat transfer coefficient of h = 60 W/m2 ·K. Determine the temperature at the center of the shaft 20 min after the start of the cooling process. Also, determine the heat transfer per unit length of the shaft during this time period
upon failure of the normal supply, a legally required standby system is required to be available in ? or less.
For all of the following options d, optional standby systems, as classified by the AHJ, would typically be required.
What kind of backup mechanism is available? systems created to supply electricity to public or private buildings or other objects when the system's operation is not essential for life safety. These systems are made to deliver locally generated or stored power to specified loads automatically or manually. What are the three different kinds of backup power systems? According to NFPA 70: National Electrical Code, there are three types of emergency and standby power systems: emergency power, legally required backup power, and voluntary standby power (NEC). Passive Optical Network is a PON. PON, which is based on fiber-optic telecommunications technology, is used to provide individualized end users with broadband network access. It enables a service provider to maintain an effective broadband connection for numerous end users via a single fiber (homes and small businesses).
Learn more about Backup power systems here:
https://brainly.com/question/29972846
#SPJ4
a room that is 40 feet by 65 feet with a 10-foot-high joisted ceiling will be protected with heat detection. the joists are 12 inches deep and run in the 40-foot direction. the engineer specified heat detectors with a 50-foot listed spacing. how many heat detectors are required for this room?
Heat detection will be used to protect a 40 by 65-foot space with a provided joisted ceiling. 716 tiles are required because the rafters are 12 inches deep.
A detection sentence is what?Finding sentences within a text is the goal of sentence boundary detection. A phrase is the input unit for several tasks in natural language processing, including part-of-speech tag, dependency analysis, named entity recognition and machine translation.
Calculation
The parameters of a room given in the question are
Length = 10 feet
Width = 14 feet
Height = 12 feet
and Jamie wants to put the tiles on walls and the floor of his room.
Dimensions of each tile
Length = 1 feet
width = 1 feet
Surface area of walls and floor = 4 walls + floor = 4(Area of one wall) + area of floor
= 2(Length×height + width×height) + (length×width)
= 2(10×12 + 14×12) + (10×14) = 2(120+168) + 140 = 2×288 + 140 = 576 +140 = 716
Now total number of tiles required = Total area to be covered/area of one tile
Number of tiles = 716/1 = 716
Therefore 716 tiles needed by Jamie.
To know more about detection visit:
https://brainly.com/question/2136390
#SPJ4
No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over?
No underwater luminaires shall be installed in a permanently-installed swimming pool that operates on supply circuits over 150 volts between conductors.
What is circuit?A circuit in electronics is a closed path that enables the movement of electricity from one point to another. A gap or break in the circuit does not obstruct the flow of current, even though it may contain a variety of electrical components like transistors, resistors, and capacitors.
A basic circuit is something like a flashlight. Because the circuit is not closed when the switch is off, no electricity will flow from the batteries to the flashlight's bulb. A piece of metal inside the flashlight physically closes the circuit gap when you turn the switch to the on position. The bulb then illuminates as a result of the batteries' electrical flow.
Learn more about circuit
https://brainly.com/question/21505732
#SPJ4
how to answer what have been your most significant experiences in stem (science, technology, engineering, and mathematics) and how will you use stem principles to improve the world?
By combining science, computing, engineering, and math, STEM enables us to address the problems that the world faces today.
How would you define engineering?Engineering is the use of math and science to the designing, testing, and construction of devices, structures, and procedures. A rewarding job can result from studying it. Problem-solving is at the heart of engineering.
Which nation has the best mechanical engineering sector?China, the States of America, German, and France have the largest need for mechanical engineers. Because they require them to design and construct machinery and other technology for their firms, these nations have a strong market for those in this field.
To know more about engineering visit:
https://brainly.com/question/14094488
#SPJ4
Determine the magnitude and direction of the force that must be applied to the bottom of the gate shown in Fig. P2.77 to keep the gate closed.
The magnitude of force that a liquid applies to the the container's surface in which it is contained is known as hydrostatic force. Hydrostatic is the amount of tension in a fluid at a specific depth.
What is the physics magnitude?In physics, the word "magnitude" is used to characterize an object's maximum size and direction. Magnitude is a factor that is shared by both scalar and vector values.
What is a vector's magnitude?The length of a vector determines its magnitude. The magnitude of the vector is denoted by the letter "a." For more information on a vector's magnitude, see the introductory to vectors.
To know more about magnitude visit:
https://brainly.com/question/17150549
#SPJ4
When a system has several control-sensing and response requirements, which is best to use?
A. Electric control
B. Pneumatic control
C. Modulating control
D. Electronic control
Answer:
A. Electric Control
Explanation:
A. Electric Control
The BEST term to describe the situation when fire activity presents a potential hazard to fireline personnel if the tactics being used are not adjusted is
The Fireline intensity is expressed in terms of flame length. It is equivalent to the product of the fuel's low heat of combustion (kJ/kg).
The heat availability of combustion per unit of ground is the sum of the heat released during a specified period of time for each unit length of the fire's edge and the rate at which the fire spreads per unit of ground area. The basic unit of measurement is Btu/sec/ft of fire front. The Fireline intensity (kW/m) is the rate of energy or heat emission per unit time per unit length of the fire front. It is equivalent to the product of the fuel's low heat of combustion (kJ/kg), the amount of fuel used in the flame front (kg/m2), and the linear pace of fire from a mathematical standpoint.
Learn more about The Fireline intensity here:
https://brainly.com/question/29348434
#SPJ4
what has the small engine and implement industry done to control emissions
Answer:
The small engine and implement industry has adopted a variety of emission control technologies to reduce pollution from engine and implements. Major innovations include direct fuel injection, spark ignition, catalytic converters, fuel reformulation, and combustion optimization. These technologies reduce the amount of hazardous air pollutants (HAPs) released into the environment. In addition, the industry has implemented stringent pollution control regulations and certification standards to further protect the environment from hazardous emissions. The main reason why the small engine and implement industry has implemented emission control techologies is to meet the requirements of Environmental Protection Agency (EPA) regulations and reduce local air pollution.
a high waist-to-hip ratio is an indication of a group of answer choices high allostatic load. low pendicular load. low allostatic load. high pendicular load.
The correct answer is high allostatic load a high waist-to-hip ratio is an indication of a group.
Allostatic load is the weight that results from collected life events and ongoing stress. Different physiological systems engage in varying levels of interaction with one another.Allostatic overload results when environmental obstacles are greater than a person's capacity to handle them. High levels of racial antagonism and discrimination, poor income, and low educational attainment all strongly predicted high allostatic load levels in a longitudinal community-based investigation on a multiethnic sample of midlife women [65]. In certain investigations, allostatic stress and years of schooling were inversely correlated [61, 73, 79, 90–92].
To learn more about high allostatic load click the link below:
brainly.com/question/28477083
#SPJ4
Martinez Construction, a large firm that has traditionally taken on many different types of projects, has begun to struggle. Many smaller firms in its area have found market sectors that they serve exclusively, such as building athletic facilities for one business, business centers for another, and affordable small-income housing for yet another. These businesses have been taking business away from Martinez, even though Martinez has greater resources than any of them. From this example, what do you think is the problem for Martinez?
Martinez needs to find ways to serve the specialized markets in its area better.
Martinez needs to find ways to serve the specialized markets in its area better.
Martinez needs to update its image because it has been in its market too long.
Martinez needs to update its image because it has been in its market too long.
Martinez needs to advertise its size and resources as selling points in its market.
Martinez needs to advertise its size and resources as selling points in its market.
Martinez needs to be smaller in order to respond more dynamically to customer needs.
Martinez needs to be smaller in order to respond more dynamically to customer needs.
