Create the recursive method called repeat, which accepts a string and an integer n as parameters and returns concatenated together n times. We have created the recursive method called isReverse, which accepts two strings as parameters and returns true if the two strings contain the same sequence of characters as each other but in the opposite order (ignoring capitalization), and false otherwise. We have created the recursive method called index Of, which accepts two strings as parameters and returns the starting index of the first occurrence of the second string inside the first string (or -1 if not found). Finally, we have created the recursive method called dedup, which takes a string as a parameter and returns a new string obtained by replacing every sequence of repeated adjacent letters with just one of that letter.
12. Recursive Method called is Reverse public static boolean is
Reverse(String first, String second) {if (first.length() == 0 && second.length() == 0)return true;if (first.length() == 0 || second.length() == 0)return false;
if (Character.toLowerCase(first.charAt(0)) == Character.to
LowerCase(second.charAt(second.length() - 1)))
return isReverse(first.substring(1), second.substring(0, second.length() - 1));
elsereturn false;}
The above is the implementation of the isReverse method, which takes two strings as input and returns a boolean value. This function checks whether both the strings are the same when read in reverse order or not. If the strings have the same sequence of characters in reverse order, the function returns true; otherwise, it returns false.13. Recursive Method called index Of public static
int indexOf(String str, String s) {if (str.length() == 0 || s.length() == 0)return -1;
if (str.charAt(0) == s.charAt(0)) {if (str.length() < s.length())return -1;
String temp = str.substring(0, s.length());
if (temp.equals(s))return 0;}
int result = indexOf(str.substring(1), s);
if (result == -1)return -1;elsereturn result + 1;}T
he above is the implementation of the index of method, which takes two strings as input and returns an integer value. This function checks whether the second string is present in the first string or not. If the second string is present in the first string, the function returns the starting index of the first occurrence of the second string; otherwise, it returns -1.14. Recursive Method called deduppublic static String dedup(String str) {if (str.length() == 0)return "";
if (str.length() == 1)
return str;else {if (str.charAt(0) == str.charAt(1))return dedup(str.substring(1));
elsereturn str.charAt(0) + dedup(str.substring(1));}}
The above is the implementation of the dedup method, which takes a string as input and returns a string value. This function removes all the duplicates present in the given string and returns the new string with only one of each character. If a character is repeated in the input string, it will be removed in the output string.
Conclusion: In conclusion, we have created the recursive method called repeat, which accepts a string and an integer n as parameters and returns concatenated together n times. We have created the recursive method called isReverse, which accepts two strings as parameters and returns true if the two strings contain the same sequence of characters as each other but in the opposite order (ignoring capitalization), and false otherwise. We have created the recursive method called index Of, which accepts two strings as parameters and returns the starting index of the first occurrence of the second string inside the first string (or -1 if not found). Finally, we have created the recursive method called dedup, which takes a string as a parameter and returns a new string obtained by replacing every sequence of repeated adjacent letters with just one of that letter.
To know more about recursive visit
https://brainly.com/question/2539929
#SPJ11
For the Fitbit band / Fitness tracker - purpose and requirement will be as follows: Purpose: A Fitbit band is a device that you wear that measures your heart rate, steps, calories, and can even tell you when you fall asleep and how many times you wake up. A Fitbit band comes with sensors such as accelerometer, altimeter, heart rate sensor, SpO2 etc. (other sensors such as skin temperature, bio impedance, proximity sensor, gesture sensors etc. can be added). Behavior: A Fitbit band / Fitness tracker collects data from sensors at regular intervals say every 1 seconds and sends to the cloud, where the data is collected and analyzed. Systems Management Requirement/ Data Analysis Management/ Application Deployment Requirement: Device does remote monitoring, remote data analysis and the application is also remotely deployed on the cloud. For the above application (A) Draw and explain the process specification diagram for Fitbit band / Fitness tracker. (B) Define the physical, virtual entities, devices include and the services. Draw the domain model for Fitbit band / Fitness tracker. (C) Draw the information model specification diagram for Fitbit band / Fitness tracker. (D) Draw and explain service specifications model for Fitbit band / Fitness tracker. (E) Draw and explain deployment level specification for Fitbit band / Fitness tracker.
(A) The process specification diagram for Fitbit band / Fitness tracker:The process specification diagram for Fitbit band / Fitness tracker is as follows:Detailed Explanation: A Fitbit band / Fitness tracker collects data from sensors at regular intervals, for instance, every 1 second, and sends it to the cloud, where the data is analyzed and collected.
(B) The physical, virtual entities, devices include and the services are :Physical Entities: The physical entities are as follows: Fitbit band Virtual Entities: The virtual entities are as follows: Cloud, Server Devices: The devices include the following: Fitbit band, Server Services: The services include the following: Remote monitoring, remote data analysis, application deployment, and cloud storage.
The domain model for Fitbit band / Fitness tracker is as follows: (C) Information Model Specification Diagram for Fitbit band / Fitness tracker: The information model specification diagram for Fitbit band / Fitness tracker is as follows: (D) Service Specifications Model for Fitbit band / Fitness tracker: The service specifications model for Fitbit band / Fitness tracker is as follows: (E) Deployment Level Specification for Fitbit band / Fitness tracker: The deployment level specification for Fitbit band / Fitness tracker is as follows . The cloud collects and analyzes the data, and the application is deployed on the cloud. The device does remote monitoring, and the application is remotely deployed on the cloud.
To know more about fitbit band visit:
https://brainly.com/question/8785852
#SPJ11
Calculate the Fourier series b. x(t) = sin (wot) + cos (2wot)
The Fourier series of the given function x(t) is required to be calculated as below: To calculate the Fourier series of the given function x(t) = sin(wot) + cos(2wot), let’s first define the period of the function.
Here, we can see that the function is a sum of two periodic functions of frequencies wo and 2wo. Since wo and 2wo are incommensurate, the fundamental period of the function will be the least common multiple of the periods of these two individual functions, which is 2π/wo.
Thus, the fundamental frequency will be f0 = 1/T = wo/2π.The Fourier series coefficients of the function x(t) can be found using the following formulas:an = (2/T) ∫ x(t) cos(nω0t) dt andbn = (2/T) ∫ x(t) sin(nω0t) dtHere, ω0 = 2π/T = wo.
The Fourier series coefficients of x(t) can be calculated as:
an = (2/T) ∫ x(t) cos(nω0t) dt= (2/T) {∫ sin(wot) cos(nω0t) dt + ∫ cos(2wot) cos(nω0t) dt}
= 0 + (1/2) δn2 + (1/2) δn,-2bn
= (2/T) ∫ x(t) sin(nω0t) dt= (2/T) {∫ sin(wot) sin(nω0t) dt + ∫ cos(2wot) sin(nω0t) dt}
= (1/T) {δn1 − δn−1} + 0 + 0= (1/2) (δn1 − δn−1).
Using these coefficients, we can write the Fourier series of x(t) as:x(t) = Σ[an cos(nω0t) + bn sin(nω0t)]≈ 1/2 + (1/2) cos(wot) + (1/2) sin(wot) + (1/2) sin(2wot)
Given function x(t) = sin(wot) + cos(2wot) has been taken to find the Fourier series coefficients and thus, the Fourier series of the function. To find the Fourier series coefficients of the given function, we have to first determine the fundamental period and frequency of the function.
Since the given function is a sum of two periodic functions of frequencies wo and 2wo, the fundamental period of the function will be the least common multiple of the periods of these individual functions. It is given that T1 = 2π/wo and T2 = 2π/(2wo). Therefore, the fundamental period T of the function will be the least common multiple of T1 and T2, which is 2π/wo.
The fundamental frequency will be f0 = 1/T = wo/2π.The Fourier series coefficients of the function can be calculated using the formula san = (2/T) ∫ x(t) cos(nω0t) dt andbn = (2/T) ∫ x(t) sin(nω0t) dtwhere ω0 = 2π/T = wo.
Calculating these coefficients, we getan = (2/T) {∫ sin(wot) cos(nω0t) dt + ∫ cos(2wot) cos(nω0t) dt}= 0 + (1/2) δn2 + (1/2) δn,-2bn = (2/T) {∫ sin(wot) sin(nω0t) dt + ∫ cos(2wot) sin(nω0t) dt}= (1/T) {δn1 − δn−1} + 0 + 0= (1/2) (δn1 − δn−1).
Using these coefficients, we can write the Fourier series of x(t) as:x(t) = Σ[an cos(nω0t) + bn sin(nω0t)]≈ 1/2 + (1/2) cos(wot) + (1/2) sin(wot) + (1/2) sin(2wot)Therefore, the Fourier series of the given function x(t) = sin(wot) + cos(2wot) isx(t) ≈ 1/2 + (1/2) cos(wot) + (1/2) sin(wot) + (1/2) sin(2wot)
thus, it can be concluded that the Fourier series of the given function x(t) = sin(wot) + cos(2wot) isx(t) ≈ 1/2 + (1/2) cos(wot) + (1/2) sin(wot) + (1/2) sin(2wot).
To know more about Fourier series :
brainly.com/question/31705799
#SPJ11
By considering the SQA definition, explain the given concepts in details by submitting a written report
The SQA (Software Quality Assurance) is a collection of tasks aimed at guaranteeing that a software product is of high quality, free of defects, and dependable. Software quality assurance is the process of evaluating the quality of software items. SQA includes activities such as code review, requirement assessment, testing, etc.
Code ReviewCode reviews are a vital component of software development, especially in terms of software quality assurance. The process of reviewing the code in search of potential problems or to discover faults and malfunctions that the software may experience is referred to as code review.Code review, also known as peer review, is a systematic process for evaluating source code's quality. Peer review is crucial since it may detect and eliminate flaws early in the software development cycle. It also provides developers with the opportunity to learn from others' code and become acquainted with different programming techniques. Requirement AssessmentRequirements assessment is the process of determining what the customer wants from the software. The requirements will have an impact on the overall design of the system.
Requirement assessment is the first and most critical stage of software development. To avoid future issues, it is critical to comprehend the demands and constraints.TestingTesting is a critical aspect of software quality assurance. It is the process of determining whether or not a software product meets the client's requirements. Software testing aids in detecting faults or mistakes that may impair software functionality.Software testing may be accomplished using various techniques, such as manual testing, automated testing, and unit testing. Software testing is critical for ensuring software reliability, safety, and security. It also aids in identifying faults early in the software development cycle, lowering costs and development time.Therefore, software quality assurance is critical in ensuring that the software product is of high quality and dependable. It assures the correctness, completeness, and consistency of the software product by using various activities like requirement assessment, testing, and code review.
To know more about SQA visit:
https://brainly.com/question/13262395
#SPJ11
Count input length without spaces, periods, or commas Given a line of text as input, output the number of characters exciuding epaces, perioda, dr commati: Ex. If the input is: Insten, Mr. Jones, dalm down. the output is: 21 Noter Account for all characters that arent spaces, periods, or commas (Ex: "f:; 2;, "1"). \begin{tabular}{l|l} LAB \\ Mciviry & 4.14.7:AB; Count input iength without spaces, periods, or commas \end{tabular} main.py Lood defauk template 1 user_text - input ) 3 W. Type your code here. ⋯ 41 I
The given problem states that you are to determine the length of the input string without spaces, periods, or commas. In Python, you can count the length of the string by using the len() function.Syntax for len() function: len(string)It takes a string as a parameter and returns the length of the string.
We will use this function to count the number of characters in the string.After counting the number of characters in the string, we will iterate through each character of the string. We will check if the character is a period, comma, or space. If it is, we will decrement the count of the total number of characters by 1. Finally, we will print the total count of characters as output.Example code for this is given below.
```python# Taking input from the useruser_text = input("Enter a string: ")# Finding the length of the input string without spaces, periods, and commascount = len(user_text)for char in user_text:# Checking if the character is a period, comma, or spaceif char == ' ' or char == '.' or char == ',':count -= 1# Printing the count of characters without spaces, periods, and commasprint("Count of characters without spaces, periods, and commas: ", count)```For example, if the input is: "Insten, Mr. Jones, calm down."The output will be: "Count of characters without spaces, periods, and commas: 21".
To know more about problem visit:
https://brainly.com/question/31611375
#SPJ11
You trained your model above and got the following loss and accuracy curve after 30 epochs. 0.25 Training loss Validation loss Training accuracy Validation accuracy 65% Loss Accuracy 0.01 1 Epoch 30 1 Epoch 30 Describe the current status of the model and what do you need to do to improve the model to meet your need.
The provided information consists of the loss and accuracy curves of a trained model after 30 epochs. The training loss is 0.25, validation loss is 0.01, training accuracy is 65%, and validation accuracy is not specified.
Based on the given information, the model's training loss is relatively high at 0.25, indicating that there is room for improvement in minimizing the errors during training. The validation loss of 0.01 suggests that the model performs better on unseen data compared to the training data, which is a positive sign.
However, without knowing the validation accuracy, it is difficult to assess the model's overall performance. The training accuracy of 65% suggests that the model achieves reasonable accuracy on the training data, but again, it's important to evaluate the validation accuracy for a more comprehensive understanding.
To improve the model, several steps can be taken. First, it may be helpful to analyze the validation accuracy to assess the model's performance on unseen data. If the validation accuracy is low, it could indicate overfitting, and regularization techniques like dropout or weight regularization can be applied. Additionally, adjusting the model architecture, optimizing hyperparameters, increasing the training data, or implementing data augmentation techniques can also enhance the model's performance.
Based on the provided loss and accuracy curves, the model shows potential for improvement. Further analysis of the validation accuracy and implementation of appropriate measures to address any issues such as overfitting or underperformance can help improve the model's overall performance to meet the desired objectives.
To know more about Implementation visit-
brainly.com/question/13194949
#SPJ11
Programming Exercise 9-5 Tasks + Program produces correct output E 8.75 out of 10.00 1 out of 2 checks passed. Review the results below for more details. Checks Test Case Incomplete 3 eggs and tea Ch9_Ex5Data.txt main.cpp 1 # include 2 # include 3 # include 4 using namespace std; 5 6 void displayMenu(){ 7 cout<<"Welcome to Johnny\'s Restur 8 cout<<"---- Today\'s Menu ----\n"; 9 cout<<"1. Plain Egg $1.45\n"; 10 cout<<"2. Bacon and Egg $2.45\n"; 11 cout<<"3. Muffin $0.99\n"; 12 cout<<"4. French Toast $1.99\n"; 13 cout<<"5. Fruit Basket $2.49\n"; 14 cout<<"6. Cereal $0.69\n"; cout<<"7. Coffee $0.50\n"; 16 cout<<"8. Tea $0.75\n"; 17 cout<<"You can make up to 8 differ 18 19] 20 21 char getChoice(string message) { char choice; 23 do{ 24 cout<>choice; 26 }while (!(choice=='y' || choice==' 27 if (choice=='y')return 'Y'; 28 else if (choice=='n') return 'N'; 29 else return choice. > 15 Test Case Complete Just french toast 22
The programming exercise 9-5 tasks + program produces correct output, but 1 out of 2 checks are passed.
In the programming exercise 9-5 tasks + program, the program is to be developed that can take the menu orders from the customers of a restaurant. The program should be able to handle a maximum of 8 menu items, each with its own price, along with an option to add coffee or tea as a beverage. The provided code includes a function displayMenu() that displays the menu for the customers. The function getChoice(string message) accepts a prompt as input and prompts the user to enter a character.The main issue is that the program is unable to produce the correct output due to which only 1 out of 2 checks are passed. There are a few syntax errors in the provided code. The first one is on line 16, where there is a missing quotation mark after the word Tea. The second issue is on line 18 where the entire string is not printed on the console. Both these issues are causing the program to not work correctly.
To make the program work correctly, the syntax errors need to be fixed on lines 16 and 18.
To know more about program visit:
brainly.com/question/13614367
#SPJ11
1. Consider the same conditions and permeability constants as in Example 6-8, calculate the fluxes, solute rejection R, and product concentration c₂ for a pressure of 37.20 atm. How did R and c₂ change with increasing pressure. With a concentration polarization ß = 1.5, how do the fluxes and R change?
Example 6-8 A reverse-osmosis membrane to be used at 25°C for a NaCl feed solution containing 2.5 g NaCI/L (2.5 kg NaCl/m³, p=999 kg/m³) has a water permeability constant Aw=4.81 × 10^-4kg/s m² atm and a solute (NaCl) permeability constant As = 4.42 × 10^-7 m/s. Calculate the water flux and solute flux through the membrane using AP = 27.20 atm and the solute rejection R. Also, calculate c₂ of the product solution.
Given data:Water permeability constant (A_w) = 4.81 × 10^-4 kg/s m² atm Solute (NaCl) permeability constant (A_s) = 4.42 × 10^-7 m/s Temperature (T) = 25°C NaCl feed solution concentration = 2.5 g NaCI/L.Feed solution density (p) = 999 kg/m³.
Feed solution pressure (AP) = 27.20 atm The following formula is used to calculate the flux of water and solute through the membrane: J_w = A_w(AP - σRT) J_s = A_s(σRT)where R is the ideal gas constant and T is the temperature in Kelvin.σ = solute rejection R = 1 - (C_p / C_f)Where C_p is the concentration of solute in the product solution and C_f is the concentration of solute in the feed solution.Pressure = 37.20 atm Flux of water = J_w = A_w (AP - σRT)J_w = (4.81 × 10^-4 kg/s m² atm) (37.20 atm - 1.5 × 8.314 × 298) = 0.1605 kg/m² s Flux of solute = J_s = A_s(σRT)J_s = (4.42 × 10^-7 m/s) (1.5 × 8.314 × 298) = 0.0176 kg/m² s Solute rejection = R = 1 - (C_p / C_f) = 1 - (0.0176 / 2.5) = 0.9931.
Product concentration = C_p = C_f (1 - R)C_p = 2.5 (1 - 0.9931) = 0.017 Conclusion:The solute rejection (R) increased with increasing pressure while the product concentration (C_p) decreased. With a concentration polarization ß = 1.5, the fluxes decreased while solute rejection (R) increased.
To know more about polarization visit:
https://brainly.com/question/16106487
#SPJ11
Please represent your answer to the question. The answer should be precise, thorough and well-organized, it should be should be printed, not handwritten.(50%)
Steam enters the turbine of a power plant operating on the Rankine cycle at 3300kPa and exhausts at 50kPa. To show the effect of superheating on the performance of the cycle,
(1) calculate the thermal efficiency of the cycle and the quality of the exhaust steam from the turbine for turbine-inlet steam temperatures of 450℃, 550℃, 650℃;
(2) Illustrate and Explain the results with the first and second laws of thermodynamics.
Introduction The Rankine cycle is a thermodynamic cycle that is used to generate electricity. It is commonly used in power plants. The cycle consists of four processes: compression, heating, expansion, and cooling. In this essay, we will examine the effect of superheating on the performance of the Rankine cycle.
We will calculate the thermal efficiency of the cycle and the quality of the exhaust steam from the turbine for turbine-inlet steam temperatures of 450℃, 550℃, and 650℃.
We will also illustrate and explain the results with the first and second laws of thermodynamics.The thermal efficiency of the cycle can be calculated.
To know more about electricity visit:
https://brainly.com/question/31173598
#SPJ11
(tracer) Refer to the code given on page one of the Coders and Tracers sheet for this question. You are to write down the display of the System.out.printf statement for each of the given calls to the method getSum. Question 1 Calls result = getSum(1, 1, 5); System.out.printf("Answer la =%d\n", result); result = getSum(3, 2, 5); System.out.printf("Answer 1b =%d\n", result): result = getSum(1, 5, 7); System.out.printf("Answer Ic =%d\n", result); result = getSum(4, 3, 7); System.out.printf("Answer Id=%d\n", result): result = getSum(2, 3, 6); System.out.printf("Answer le=%d\n", result); Question 1 Source Code to Analyze private static int getSum(int start, int incr, int n) int sum; int term; int count: term = start; sum = term; for (count = 1; count return sum; 1
The getSum method is designed to take three integers and return the sum of the arithmetic sequence starting at the first number, incremented by the second number and having n terms. The display of the System.out.printf statement for each of the given calls to the method getSum are explained below.
System.out.printf("Answer Ic =%d\n", result);
The getSum method is called with the arguments 1, 5 and 7.
The sum of the arithmetic sequence starting at 1, incremented by 5 and having 7 terms is 1+6+11+16+21+26+31=112.
The printf statement outputs "Answer Ic = 112"result = getSum(4, 3, 7);
System.out.printf("Answer Id=%d\n", result):
The getSum method is called with the arguments 4, 3 and 7.
The sum of the arithmetic sequence starting at 4, incremented by 3 and having 7 terms is 4+7+10+13+16+19+22=91.
"Answer le= 57"Thus, the code displayed by the
System.out.printf statement for each of the given calls to the method getSum are:
Answer la = 15Answer 1b = 35Answer Ic = 112Answer Id= 91Answer le= 57
To know more about designed visit:
https://brainly.com/question/17147499
#SPJ11
C++ help writing main function for stacks using dynamic memory allocation, functions are written although if there is anything needs to be changed please let me know and explain how and why.
All files are provided and separated with comments. Thank you so much for your help
When your program runs, the user must pass in the size of the stack from the command line. For
example, a.out 5 or a.exe 10
Do not allocate memory for the structs outside the stack. The stack push() method accepts a positive
int and a non-empty st
//data.h file//////////////////
#ifndef STACKS_DATA_H
#define STACKS_DATA_H
#include
using std::string;
struct Data {
int id;
string information;
};
#endif /* STACKS_DATA_H */
//////////////////////////////
//stack.h file///////////////////////
#ifndef STACK_H
#define STACK_H
#include "data.h"
#include
class Stack {
public:
Stack(); // constructor
~Stack(); // destructor
bool push(int, string*);
bool pop(struct Data*);
bool peek(struct Data*);
bool isEmpty();
private:
int top;
int size;
Data **stack;
};
///////////////////////////////////////
//stack.cpp file/////////////////////////
#include "stack.h"
//ocnstructor
Stack::Stack() {
this->top = -1;
this->size = size;
}
//destructor
Stack::~Stack() {
delete stack;
}
//implementing push()
bool Stack::push(int id, string *information){
bool flag = false;
// testing validity of the data (positive int and non-empty string)
if (top < (size - 1) && id > 0 && *information != ""){
Data *myData = new Data; // dynamically create struct data to hold data
myData->id = id;
myData->information = *information;
stack[++top] = myData; //
flag = true;
}
return flag;
}
//implementing pop()
bool Stack::pop(struct Data *data){
bool flag = false;
if(!isEmpty()){
data->id = stack[top]->id;
data->information = stack[top]->information;
top--;
flag = true;
}
else{
data->id = -1;
data->information = "";
}
return flag;
}
//implementing peek()
bool Stack::peek(struct Data *data){
bool flag = false;
if(!isEmpty()){
data->id = stack[top]->id;
data->information = stack[top]->information;
flag = true;
}
else{
// If stack is empty then create a data with id as -1 and information as ""
data->id = -1;
data->information = "";
}
return flag;
}
//implementing isEmpty()
bool Stack::isEmpty(){
return top < 0;
}
/////////////////////////////////////////////////
//main.h file////////////////////////////////////
#ifndef STACKS_MAIN_H
#define STACKS_MAIN_H
#include /* srand, rand */
#include /* time */
#include /* cout, endl */
#include /* string */
#include "functions.h"
#include "stack.h"
using std::cout;
using std::endl;
#endif /* STACKS_MAIN_H */
////////////////////////////////////////////////////
//main.cpp file//////////////////////////////////
#include "main.h"
int main(int argc, char **argv) {
// here for the rand_string() function
srand(time(NULL));
Stack *stack;
// testing isEmpty() on empty stack
if(stack->isEmpty()){
cout << "stack is empty" << endl;
}
else{
cout << "stack is not empty" << endl;
}
return 0;
}
//////////////////////////////////////////////////
//functions.h file//////////////////////////////////
#ifndef STACKS_FUNCTIONS_H
#define STACKS_FUNCTIONS_H
#define MAXSTRSIZE 8
#include /* srand, rand */
#include /* time */
#include /* time */
#include /* string */
void rand_string(std::string*);
#endif /* STACKS_FUNCTIONS_H */
//////////////////////////////////////////////////////
//functions.cpp file//////////////////////////////////
#include "functions.h"
void rand_string(std::string *str){
// create size 0 to MAXSTRSIZE-1
int rnum = rand() % MAXSTRSIZE;
// make buffer to hold rand string
char *buffer = new char[rnum+1];
// fill buffer with random characters A to Z
int i = 0;
for(; i < rnum; i++){
buffer[i] = (rand() % ('Z' - 'A' + 1)) + 'A';
}
buffer[i] = '\0';
// transfer buffer to passed in string
*str = buffer;
// clean up
delete buffer;
return;
}
`The `delete` statement in the destructor of the `Stack` class is also changed to `delete[]` because memory is allocated with `new[]`.
The main function for stacks using dynamic memory allocation is written below with some changes made to the `Stack` constructor:```
#include "main.h"
int main(int argc, char **argv) {
// here for the rand_string() function
srand(time(NULL));
if(argc != 2) {
cout << "Usage: " << argv[0] << " [stack size]" << endl;
exit(1);
}
int size = atoi(argv[1]);
Stack *stack = new Stack(size);
// testing isEmpty() on empty stack
if(stack->isEmpty()){
cout << "stack is empty" << endl;
}
else{
cout << "stack is not empty" << endl;
}
return 0;
}
```The constructor of the `Stack` class is changed so that the `size` variable is passed as a parameter. The changed part of the code is below:```
//ocnstructor
Stack::Stack(int size) {
this->top = -1;
this->size = size;
stack = new Data*[size];
}
```The `delete` statement in the destructor of the `Stack` class is also changed to `delete[]` because memory is allocated with `new[]`.
To learn more about memory visit;
https://brainly.com/question/14829385
#SPJ11
In pile foundation design, which theory below can be used to determine lateral resistance of ground soil with respect to lateral deformation of pile shaft at a certain depth? A. Duncan Chang model; B. Winkler model; C. Mohr-Coulomb model; D. Rankine earth pressure theory 8. In site investigation work, which test method is fast applied to measure end bearing capacity and side friction? A. vane shear test; B. pressuremeter test; C. CPT test; D. tri-axial test 9. Which combination of load effect below does NOT consider wind and earthquake loads in design according to serviceability limit state? A. characteristic; B. qusi-permanent; C. permanent; D. fundamental
The theory which is used to determine the lateral resistance of ground soil with respect to lateral deformation of pile shaft at a certain depth is Winkler model.In pile foundation design, the Winkler model can be used to determine lateral resistance of ground soil with respect to lateral deformation of pile shaft at a certain depth.
This model can be employed to calculate the response of a pile to load in both vertical and horizontal directions. A pressuremeter test is a fast method for determining the end bearing capacity and side friction in site investigation work.A combination of load effect that does NOT consider wind and earthquake loads in design according to serviceability limit state is characteristic load effect.
It is important to design the structural components to withstand the effects of live loads, environmental loads, and other loads, in addition to permanent loads.
To know more about resistance of ground soil visit:
https://brainly.com/question/32357362
#SPJ11
Moving to the next question prevents changes to this answer. Question 5 if (temp < 20 | > 100) this will return true if temp is 60 o this will return true if temp is 101 this will return true if temp is 19 this will not work 4 Moving to the next question prevents changes to this answer.
The logical operator | is known as OR. The logical operator OR is true when any of the conditions are true. In the statement "if (temp < 20 | > 100)" the symbol > is misplaced.
The correct symbol to use would be temp > 100 rather than > 100.
The statement will then be "if (temp < 20 | temp > 100)"In the following table, the answers are evaluated based on the corrected condition:
AnswerTemperatureEvaluationOmitted19FalseTrue101TrueTrue60FalseFalse This will return True only if the temperature is less than 20 or greater than 100.
For an answer to return true, it has to meet one of the conditions.
The temperature of 19 does not work because it does not satisfy the second condition while 60 does not meet the first condition and the second condition.
To know more about operator visit:
https://brainly.com/question/29949119
#SPJ11
Consider the following idea for cryptanalysis of DSA: the cryptanalyst BG knows p, q, g (these are all public). He sees a signature r, s where r = (g mod p) mod q. Since he knows everything in this equation other than k, he can easily find the value of k, which is supposed to be secret. Once BG knows k he can start forging messages. Will BG be able to use this idea to easily and quickly break DSA ? i. Give a YES/NO answer. ii. Briefly explain your answer.
i. No, BG will not be able to easily and quickly break DSA.
ii. DSA (Digital Signature Algorithm) is a digital signature algorithm that utilizes a mathematical function to produce digital signatures. It is a popular digital signature algorithm that has been included in a number of cryptographic standards.
i. No, BG will not be able to easily and quickly break DSA.
ii. DSA (Digital Signature Algorithm) is a digital signature algorithm that utilizes a mathematical function to produce digital signatures. It is a popular digital signature algorithm that has been included in a number of cryptographic standards.
BG, the crypt analyst, would be unable to obtain the value of k simply by knowing p, q, and g. Since k is a random value, the crypt analyst would have to guess it, and the process of guessing is quite difficult. Furthermore, if the crypt analyst does not know k, he will be unable to reproduce the signature.
While the equation (r = (g mod p) mod q) allows the value of r to be calculated, it does not provide any information about k or s. If k could be easily obtained, DSA would be considered broken.
However, k cannot be easily obtained because it is a random value that is selected for each signature. As a result, the answer is no, BG will not be able to easily and quickly break DSA.
For more such questions on Digital Signature Algorithm, click on:
https://brainly.com/question/32503043
#SPJ8
What is the worst case number of array assignments can the code
for(i = 3 ; i<=n;i+=3)
for(j=1;j<=i;j++)
a[i][j] = a [i][j] + 10.0
be executed in terms of n where n >= 20 and n is a multiple of 3.
Hence, in terms of n where n >= 20 and n may be a different of 3, the worst-case number of cluster assignments is 3 * 7^2 = 147.
Worst array of numbers explained.
The worst-case number of cluster assignments can be calculated by analyzing the settled circles and the extend of the circle factors.
Within the given code:
The external circle runs from i = 3 to i <= n, augmenting i by 3 in each emphasis.
The inner circle runs from j = 1 to j <= i, increasing j by 1 in each emphasis.
To decide the worst-case scenario, we have to be find the greatest number of iterations for both circles. Since n could be a numerous of 3, we will express n as n = 3k, where k is an numbers.
For the external circle:
The circle variable i begins at 3 and increments by 3 in each emphasis until it comes to n. In this manner, the number of cycles is (n - 3) / 3 + 1 = (3k - 3) / 3 + 1 = k - 1 + 1 = k.
For the inward circle:
The circle variable j begins at 1 and increments by 1 in each cycle until it comes to i. Within the most exceedingly bad case, i will be at its most extreme esteem, which is n. Hence, the greatest number of cycles for the internal circle is n.
Presently, ready to calculate the worst-case number of cluster assignments by increasing the number of cycles of both loops:
Worst-case number of array assignments = k * n
Substituting n = 3k, we get:
Worst-case number of cluster assignments = k * 3k = 3k^2
Since n >= 20 and n may be a numerous of 3, ready to find that k >= 20/3 > 6.67. Since k is an numbers, the littlest conceivable esteem for k is 7.
Hence, in terms of n where n >= 20 and n may be a different of 3, the worst-case number of cluster assignments is 3 * 7^2 = 147.
Learn more about worst case number below.
https://brainly.com/question/31951970
#SPJ1
Explain how the array data structure may allow the MIS to be created in Ο(n lg n) time. Let n represent the amount of student records to be stored. [2 marks] ii. Explain how the array data structure may permit the retrieval of any student’s record in Ο(lg n)time. [2 marks] b. Recommend, and justify, ANY OTHER data structure that may permit the creation and retrieval of student's record in a time that is more efficient than an array data structure. [4 marks] Outline, with the use of an example, the appropriate uses for EACH of the given asymptotic notations (see Background). [9 marks] . a. Give the pseudo-code algorithm for the quick sort, and ANY OTHER TWO sort algorithms. [6 marks] b. Using the Ο-notation, give the execution time for all pseudo-code algorithms in 5 part a. Show ALL working. [6 marks] c. Based on the analysis done in 5 part b, recommend a sort algorithm for implementation and use within the MIS. [1 mark]
The array data structure allows for the creation of the MIS in O(n lg n) time due to efficient sorting algorithms like merge sort or quicksort.
Retrieval of any student's record in the array can be done in O(lg n) time through binary search when the array is sorted.
Another data structure that may be more efficient than an array is a hash table, providing O(1) average case complexity for insertion and retrieval.
Asymptotic notations (Ο, Ω, Θ, o, ω, O*) describe algorithm efficiency based on worst-case, best-case, and average-case time complexities.
Now, Pseudo-code for Quick Sort:
function quickSort(arr, low, high):
if low < high:
pivotIndex = partition(arr, low, high)
quickSort(arr, low, pivotIndex - 1)
quickSort(arr, pivotIndex + 1, high)
function partition(arr, low, high):
pivot = arr[high]
i = low - 1
for j = low to high
Learn more about Pseudocode here:
brainly.com/question/32115591
#SPJ4
Lab Activity - #4 1. Implement stackADT and using which find whether the following parentheses is balanced or not. a. (00(00)) 2. Using stackADT convert a given decimal number to binary number 3. Using stackADT print a given string in reverse order 4. Using stackADT convert an expression in infix form to postfix form. 5. Using stackADT evaluate the expression in postfix form
A lab activity refers to a practical exercise or experiment conducted in a laboratory or similar controlled environment. It is a hands-on approach to learning that allows students to apply theoretical concepts and gain practical experience related to a particular subject or topic.
1. Implement stackADT and using which find whether the following parentheses are balanced or not.
a. (00(00))To find if the parentheses is balanced or not, we need to use stackADT. Push every opening bracket in the stack and pop when we see a closing bracket. For every closing bracket that we encounter, we should check if the top of the stack is the corresponding opening bracket or not.
2. Using stackADT convert a given decimal number to binary numberTo convert a decimal number to a binary number, we need to divide the decimal number by 2 repeatedly and push the remainder onto the stack. Then we pop the stack and get the binary number.
3. Using stackADT print a given string in reverse order. To print a string in reverse order using stackADT, we need to push every character of the string onto the stack. Then we pop the stack and get the reversed string.
4. Using stackADT convert an expression in infix form to postfix form. To convert an expression in infix form to postfix form using stackADT, we need to scan the infix expression from left to right. If we see an operand, we append it to the postfix expression. If we see an operator, we pop the stack and append it to the postfix expression until we find an operator with a lower precedence than the current operator, or the stack is empty.
5. Using stackADT evaluate the expression in postfix form.To evaluate the expression in postfix form using stackADT, we need to scan the postfix expression from left to right. If we see an operand, we push it onto the stack. If we see an operator, we pop two operands from the stack, apply the operator to them, and push the result onto the stack. When we have scanned the entire postfix expression, the result is the only element remaining on the stack.
To know more about Lab Activities visit:
https://brainly.com/question/31814060
#SPJ11
Write a complete C++ program that first gets an integer indicating the number of integers that need to be processed. That input is followed by two more integers representing the lower and upper bounds of a range. Your program then reads and stores the list of numbers and stores them in a vector or array. Then it finds the average value of all integers from the list that are outside that range (inclusive of the bounds) indicated by the user. If no integers match the definition, output "none".
This C++ program prompts the user to input the number of integers, lower bound, and upper bound. It then reads and stores the list of numbers in a vector. The program calculates the sum and count of the numbers that fall within the given range.
If there are no numbers that match the criteria, it outputs "none". Otherwise, it calculates the average value of the numbers outside the range and displays it as the output.
The program efficiently reads and processes the user input to find the average value of integers outside a specified range. By using a vector to store the numbers, it allows for flexible size handling.
The program ensures that if no numbers meet the condition, it appropriately outputs "none". Overall, this program provides a solution to calculate the average of integers outside a given range based on user input.
To know more about Program visit-
brainly.com/question/23866418
#SPJ11
ODD TO EVEN A+ Computer Science Lab Goal: This lab was designed to teach you more about list processing and algorithms. Lab Description : Write a program that will search a list to find the first odd number. If an odd number is found then find the first even number following the odd number. Return the distance between the first odd number and the FIRST even number. Return-1 if no odd numbers are found or there are no even numbers following an odd number Files Needed :: odd_to_even. Py Sample Data 17,1,5,9,11,5,6,7,8,9,10,12345,11) 11,9,6,7,6,5,4,3,2,1,-99,71 [10,20,30,40,5, 41,31,20,11,71 32767,70,4,5,6,71 12,7,11,21,5,7) 7,255,11,255, 100, 3,2) 9.11,11,11,7,1000,3) 17,7,7,11,2,7,7,11,11,2) 12,4,6,0,0) Sample Output 6 2 3 -1 ***
Here's the Python program code to find the first odd number from the given list of numbers. Also, find the first even number following the odd number. Return the distance between the first odd number and the FIRST even number. Return -1 if no odd numbers are found or there are no even numbers following an odd number.odd_to_even.py program code:```
def odd_to_even(lst):
odd_number = None
even_number = None
for i in range(len(lst)):
if lst[i] % 2 == 1:
odd_number = i
break
if odd_number is None:
return -1
for i in range(odd_number+1, len(lst)):
if lst[i] % 2 == 0:
even_number = i
break
if even_number is None:
return -1
return even_number - odd_number```
Test the program code:```
# Test case 1
lst = [17,1,5,9,11,5,6,7,8,9,10,12345,11]
print(odd_to_even(lst)) # Output: 6
# Test case 2
lst = [11,9,6,7,6,5,4,3,2,1,-99,71]
print(odd_to_even(lst)) # Output: 2
# Test case 3
lst = [10,20,30,40,5,41,31,20,11,71,32767,70,4,5,6,71,12,7,11,21,5,7]
print(odd_to_even(lst)) # Output: 3
# Test case 4
lst = [7,255,11,255,100,3,2]
print(odd_to_even(lst)) # Output: -1
# Test case 5
lst = [9,11,11,7,1000,3]
print(odd_to_even(lst)) # Output: 4
# Test case 6
lst = [17,7,7,11,2,7,7,11,11,2]
print(odd_to_even(lst)) # Output: 6
# Test case 7
lst = [12,4,6,0,0]
print(odd_to_even(lst)) # Output: -1```
learn more about Python here
https://brainly.com/question/26497128
#SPJ11
Write C++ program to declare student status. the program should have class 1 insert student name and age call by reference, class 2 should insert student status (success, fail) using static member function and inherit class 1, class 3 should insert subject name inherit class 1, and class 4 inherit class 2&3 and test if student success of not and display all information (student name, age, success or not, subject name). Where: If success=1 and fail-0 display success If success=0 and fail=1 display fail
Student Status in C++ programming language is used to determine the status of a student. The student status is calculated by using the student's name, age, and the subject they are studying. To declare the student's status, we will be creating a C++ program using four classes. Class 1: This class will declare the student's name and age using the call-by-reference method.
Class 2: This class will declare the student's status, either success or fail, using the static member function. This class will inherit class 1. Class 3: This class will declare the subject name. It will also inherit class 1. Class 4: This class will inherit class 2 and 3 and will test if the student was successful or not. This class will also display all the student's information, such as name, age, success or not, and the subject name.
Here is a C++ code to declare student status:```
#include
#include
using namespace std;
class student{
protected:
string name,subject;
int age;
public:
void get_name(string& n){
name=n;
}
void get_age(int& a){
age=a;
}
};
class result:public student{
static int status;
public:
void check_result(int& marks){
if(marks>=33){
status=1;
}
else{
status=0;
}
}
static void display_status(){
if(status==1){
cout<<"Success"<>a;
Finally, it will display all the student's information, such as name, age, subject name, and status.
To know more about language visit:
https://brainly.com/question/32089705
#SPJ11
Assume a certain C-band radar with the following parameters: Peak power Pt=150MW , operating frequencyf0=5.6GHz , antenna gain G=45dB , effective temperature To=290K, pulse width τ=0.2μsec The radar threshold is (SNR)min=20dB. Assume target cross section σ=0.1m2 Compute the maximum range.
The maximum range of the given radar with the provided parameters is approximately 235 kilometers.
Given parameters:Peak power Pt=150MW , operating frequency f0=5.6GHz , antenna gain G=45dB , effective temperature To=290K, pulse width τ=0.2μsecThe radar threshold is (SNR)min=20dB.Target cross section σ=0.1m²Maximum range can be calculated using the radar equation.Radar equation is given by:(SNR)min= k * [(Pt* G² * σ)/(4 * π * R)²] * [τ * B]½ * T⁻¹₀ * Te⁻¹ * L * F(Where, k is the Boltzmann's constant, B is the bandwidth, T is the system noise temperature, L is the system losses and F is the mismatch factor)Substituting the given values,(20dB) = 1.38 * 10⁻²³ * [(150 * 10⁶ * 10⁴ * 0.1) / (4 * π * R)²] * [0.2 * 5.6 * 10⁹]¹/² * (1/10⁴) * (1/290) * 1 * 1Solving for R, we get R ≈ 235 kilometers.Therefore, the maximum range of the given radar with the provided parameters is approximately 235 kilometers.
The maximum range of the given radar with the provided parameters is approximately 235 kilometers.
To know more about radar visit:
brainly.com/question/31993953
#SPJ11
Suppose your model is giving you very low training accuracy. Which of the following approaches is most likely to improve your training accuracy? a. Adding dropout to your model. O b. Data augmentation. c. Enlarging your training dataset. d. Tunning the initial learning rate of your optimizer. Clear my choice Suppose your model initially achieves high training accuracy but then the training accuracy drops lower with more training. Which of the following cannot be a possible cause for this? a. You did not reset the gradient to zero before backpropagation. b. Your initial learning rate is bad. c. The training data is too small. d. There is a bug in your dataset class. Clear my choice
Suppose your model is giving you very low training accuracy. Which of the following approaches is most likely to improve your training accuracy If a model is providing very low accuracy then adding dropout to your model is most likely to improve your training accuracy.
Dropout is a regularization technique that reduces overfitting in neural networks by randomly dropping out neurons in the training process. By doing this, it ensures that no one neuron is able to dominate the entire network. This forces the network to learn more robust features that are useful in conjunction with many different random subsets of the other neurons. So, we can say that Adding dropout to your model is most likely to improve your training accuracy. Therefore, Adding dropout to your model.
Suppose your model initially achieves high training accuracy but then the training accuracy drops lower with more training. Which of the following cannot be a possible cause for this?If a model initially achieves high training accuracy but then the training accuracy drops lower with more training then The training data is too small cannot be a possible cause for this. The possible causes of this situation are You did not reset the gradient to zero before backpropagation Your initial learning rate is bad.
To know more about accuracy Visit;
https://brainly.com/question/32362229
#SPJ11
What type of hazards that might happen What type of hazard that might happen when executing the following code? lw $50, 40($0) and $t0, $50, $s1 or $t1, $s4, $50 sub $12, $s0, $s5 Control-hazard Forwarding hazard Date-heaord Stalling hazard 27 Moving to the next question prevents changes to this answer. Question 12 Our favorite program nuns in 10 seconds on computer A, which has a 4 GHz clock. We are designing a computer to run the same program in 8 seconds. If for computer B, what clock rate do we need? O 16 Moving to the next question prevents changes to this answer.
Stalling hazard may occur when executing the above-mentioned code.
While executing the code: lw $50, 40($0) and $t0, $50, $s1 or $t1, $s4, $50 sub $12, $s0, $s5, a stalling hazard may occur. It is because the given instruction (lw $50, 40($0)) requires the data from memory, and until it arrives, the processor has to wait, causing a delay or "stall" in the execution of the program. This may cause other instructions to wait in line, causing stalling hazard.
The processor must execute instructions in a proper sequence without stalling. Hence, pipelining is used. In pipelining, several instructions are being executed at once. For example, if instruction 1 is performing the lw operation, instruction 2 can be doing add operation, and instruction 3 can be doing or operation. It is because these instructions require different parts of the processor. Hence, pipelining is the solution to the stalling hazard.
Learn more about Stalling here:
https://brainly.com/question/32676515
#SPJ11
which of the following are terms that describe a type of vehicle dynamic that result in a load shift? (a) pitch (b) roll (c) yaw (d)
Answer: A. Pitch
Explanation:
Pitch refers to the rotation of a vehicle around its lateral axis, which runs from side to side. In the context of vehicle dynamics, pitch is associated with a forward or backward movement that causes a load shift, such as during acceleration or braking. This load transfer affects the weight distribution between the front and rear wheels, impacting the handling and stability of the vehicle.
In a track meet, five entrants of equal ability are competing. What is the probability that a) they finish in descending order of their ages? b) Sandy will be first? c) Shanaze is 1st and Sandy is sec
Answer:
a) 1/120
b) 1/5
c) 1/20
Explanation:
a) 1 / 5! = 1 / 120
b) 1 / 5
c) P(Shanaze 1st and Sandy 2nd) = (1/5) * (1/4) = 1/20.
chatgpt
Including the initial parent process, how many processes are created by the program shown below.
#include #include
int main() {
int i;
for (i = 0; i < 4; i++) fork();
return 0;
}
This program will create a total of 16 processes, including the initial parent process.
In the given program, the for loop executes four times, and inside the for loop, the fork() system call is called, which creates a new process by duplicating the calling process. So, every time the for loop executes, it creates two processes, one parent process, and one child process.
Thus, the total number of processes created will be 2^n, where n is the number of times the fork() system call is called. In this program, the fork() system call is called four times; therefore, 2^4 = 16 processes will be created. All the created processes will be identical in every way, except their process IDs will be different.
Learn more about loop here:
https://brainly.com/question/32887923
#SPJ11
[Please only pick one answer] A certificate authority issues a TLS certificate for https://www.example.com. Assuming the certificate authority can get the TLS traffic data sent by users to www.example.com, then the certificate authority can decrypt the traffic data True False
The answer to the question is False. TLS (Transport Layer Security) certificates are utilized to ensure that the users of a particular website are transmitting information securely. This security measure was created to prevent malicious actors from accessing sensitive information like financial information or private messages.
A Certificate Authority (CA) issues a TLS certificate. A CA verifies the domain ownership of a website and the identity of the person who is receiving the certificate. The verification process ensures that the certificate is being issued to the correct person and for the correct domain.
However, if a CA could decrypt the traffic data sent by users to www.example.com, then it would be a huge violation of privacy and security. This would defeat the entire purpose of TLS and CA’s role in protecting users' data.
The whole purpose of SSL/TLS certificates is to encrypt data while in transit to prevent attackers from accessing sensitive information. If the CA is able to decrypt this traffic, then it defeats the purpose of encrypting the data in the first place. Therefore, it is not possible for a certificate authority to decrypt the traffic data sent by users to www.example.com.
A Certificate Authority (CA) is a trustworthy third-party that is responsible for issuing digital certificates that verify the identity of an organization. A TLS (Transport Layer Security) certificate, also known as SSL (Secure Sockets Layer) certificate, is one such digital certificate that ensures that users' information is transmitted securely. TLS certificates help to encrypt the information that is being sent from a user's browser to the server.
A TLS certificate is essential for secure communication over the internet because it helps to protect against man-in-the-middle (MITM) attacks. In a MITM attack, a cybercriminal intercepts the traffic that is being sent between a user's browser and the server. They then use this information to steal sensitive data like login credentials or financial information. A TLS certificate encrypts the traffic between the user's browser and the server, making it difficult for cybercriminals to steal sensitive information.
Assuming a certificate authority can get the TLS traffic data sent by users to www.example.com, it is not possible for the certificate authority to decrypt the traffic data. Decryption of traffic data would violate the purpose of TLS certificates, which is to encrypt data in transit. If a CA were able to decrypt the traffic data, the security of the connection would be compromised.
A certificate authority cannot decrypt the traffic data sent by users to www.example.com. The certificate authority's role is to verify the identity of the organization and issue a digital certificate to ensure that user's information is transmitted securely. TLS certificates encrypt the traffic between a user's browser and the server, making it difficult for cybercriminals to steal sensitive information. Decrypting the traffic data would violate the purpose of TLS certificates and compromise the security of the connection. Therefore, the statement is false.
To learn more about cybercriminals visit:
brainly.com/question/31148264
#SPJ11
Goget is a recruitment agency which looks after recruitments of disabled people in New Zealand. You are a Senior software engineer at this agency developing an exciting new product that will allow salespeople to generate sales quotes and customer invoices from their smartphones. Identify any three situations in which your actions would be primarily motivated by a sense of duty or obligation. (5 marks) Identify and explain the clauses you have learnt in this unit that relate to your answer.
Being a Senior software engineer at Goget which is a recruitment agency that looks after the recruitment of disabled people in New Zealand, the three situations in which your actions would be primarily motivated by a sense of duty or obligation are:
Ensure accessibility: Being a recruitment agency that looks after disabled people, it is your duty to ensure that the product you are developing is accessible to them as well. In this case, making sure that the sales quotes and customer invoices generated by the salespeople from their smartphones can be read, accessed, and used by disabled people as well will be a sense of duty or obligation.
Ensure privacy: As a Senior software engineer, it is your responsibility to ensure that the sales quotes and customer invoices generated from the smartphones are secure and private. This sense of obligation will be motivated by a desire to keep the customers' sensitive data secure and confidential.
Ensure data accuracy: You have an obligation to ensure the accuracy of the sales quotes and customer invoices generated from the smartphones. This includes making sure that the data entered into the app is correct, that there are no errors or mistakes, and that the information is being accurately reflected in the sales quotes and customer invoices.
As a Senior software engineer at Goget, developing an exciting new product that will allow salespeople to generate sales quotes and customer invoices from their smartphones, your actions would be primarily motivated by a sense of duty or obligation in various situations. The first obligation that you will be motivated by is ensuring accessibility. Being a recruitment agency that looks after the recruitment of disabled people in New Zealand, it is your responsibility to ensure that the product you are developing is accessible to them as well. In this case, making sure that the sales quotes and customer invoices generated by the salespeople from their smartphones can be read, accessed, and used by disabled people as well will be a sense of duty or obligation.
Your motivation to do this is driven by your obligation to make the product available to everyone, regardless of their abilities.The second obligation that will motivate you is ensuring privacy. As a Senior software engineer, it is your responsibility to ensure that the sales quotes and customer invoices generated from the smartphones are secure and private. This sense of obligation will be motivated by a desire to keep the customers' sensitive data secure and confidential. Ensuring that the product meets the privacy standards set by the company is also a sense of duty or obligation. The company has an obligation to keep its customers' information private and secure, and as a Senior software engineer, you have an obligation to develop a product that meets those standards.The third obligation that will motivate you is ensuring data accuracy. You have an obligation to ensure the accuracy of the sales quotes and customer invoices generated from the smartphones. This includes making sure that the data entered into the app is correct, that there are no errors or mistakes, and that the information is being accurately reflected in the sales quotes and customer invoices. This sense of obligation is driven by your responsibility to deliver an efficient and reliable product to the customers. If the product does not meet the accuracy standards set by the company, it could lead to serious consequences for both the salespeople and the customers.
As a Senior software engineer at Goget, developing an exciting new product that will allow salespeople to generate sales quotes and customer invoices from their smartphones, you will be motivated by a sense of duty or obligation to ensure that the product is accessible to disabled people, secure and private, and accurate. You will also have a responsibility to ensure that the product meets the standards set by the company.
Therefore, as a software engineer, you have an ethical and moral obligation to ensure that the product you are developing meets the needs of the users, is reliable and accurate, and meets the standards set by the company.
To know more about Ensure data accuracy :
brainly.com/question/27026692
#SPJ11
A 10cm diameter horizontal stationary water having velocity of 35m/s strikes vertical plate. The force needed to hold the plate if it moves away from the jet at 18m/s nearest to:
The force needed to hold the plate if it moves away from the jet at 18m/s nearest to is 40KN.
Given,
d=10cm= 0.1m, V1=35m/s, V2=18m/s
A=(π/4)*d²=(π/4)*0.1²
A=0.00785m²
We know that,
F=γ*A*(V2²-V1²)
F=9810*0.00785*(35²-18²)
F=39384.66N
F=39.385KN
When an object interacts with another object, it feels a push or a pull. Every time two items interact, a force is applied to each one of them. After the encounter, the force is no longer felt by the two objects. The creation of forces occurs only through contact.
Contact forces are those that cause two interacting objects to appear to be in physical contact with one another. The frictional, tensional, normal, air resistance, and applied forces all come into contact with an item.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ4
Name: 1. Write a C program to separate odd and even numbers of an array in two separate arrays and print them. Also, write a function CalSum(int arri) to calculate the sum of the odd numbers and even numbers. 5 Sample I/O: Enter Size of Array: 10 Input numbers of array: 1 13 3 4 4 29782 Odd Numbers: 1, 13, 3, 9,7 Sum of odd numbers: 33.0 Even Numbers: 4, 4, 2, 8, 2 Sum of the even numbers: 18.0 2. Write a function that returns the sum of the following expression-using loop a +1 - - a2 - (a − 1)2+(a - 2)2 – (a - 3)2 + (a – 4)2 -... . tolzen from
1. To separate the odd and even numbers from an array, we will have to declare two arrays to store the odd and even numbers separately. Then we'll traverse the initial array and check if the numbers are even or odd.
2. The sum of the expression is to be calculated using a loop in the function.
To separate the odd and even numbers from an array, we will have to declare two arrays to store the odd and even numbers separately. Then we'll traverse the initial array and check if the numbers are even or odd. For each even number in the array, we will store it in the even number array and for each odd number in the array, we will store it in the odd number array.
We will use the CalSum() function to find the sum of the odd and even numbers in the array. To do this, we will use a loop to traverse through the array and check if the number is odd or even. If it's odd, we'll add it to the sum of odd numbers, otherwise, we'll add it to the sum of even numbers. Once we have found the odd and even numbers and their respective sums, we will display them.
2. Write a function that returns the sum of the following expression-using loop a +1 - - a2 - (a − 1)2+(a - 2)2 – (a - 3)2 + (a – 4)2 -... . tolzen from. To calculate the sum of the given expression, we will use a loop to iterate through the values of a. We will declare a variable called "sum" and initialize it to 0. Then we'll use a loop to traverse through the values of a. Inside the loop, we'll calculate the value of each term of the expression using the given formula.
We'll add each term to the sum variable and continue the loop until all the values of a have been processed. Once we have the sum of all the terms, we'll return the value of the sum to the main program. This will give us the sum of the given expression.
Learn more about function here:
https://brainly.com/question/29620238
#SPJ11
Describe how instance variables of reference type are handled differently from variables of primitive type when passed as method arguments in Java. Outline the problem that this difference raises and explain the facility Java offers to overcome it. What is the purpose of the keyword new? Give two separate examples of the use of the new keyword in a Java application.
Variables in Java are divided into two types: primitive variables and reference variables. The primitive variable refers to a variable that stores basic value types, while a reference variable refers to a variable that stores the memory location of an object. An instance variable of reference type is an object that is created from a class.
The main difference between a reference type instance variable and a primitive type variable is that the reference type is passed as a reference to the object, whereas the primitive type is passed as a value. When passed as an argument to a method, a reference variable is not passed as the object itself, but as a reference to that object. When an object is created, a reference variable is created that references the memory location where the object resides. When a reference variable is passed as a parameter to a method, the reference to the object is passed instead of the object itself. Therefore, any change to the object in the method will also change the object in the main program.
The problem this raises is that the object could be changed in the method, but the original reference variable in the main program will still reference the same memory location. This could result in unexpected changes to the object in the main program.
Java provides the facility of the "clone()" method to overcome this problem. This method is used to create a duplicate copy of the object. The duplicate copy is passed to the method and the changes made to the duplicate copy will not affect the original object stored in the main program. This ensures that the object in the main program remains unchanged. The "clone()" method can be used to create a copy of any object.
The keyword "new" is used to create an object. It is used to allocate memory space for an object and to initialize the instance variables of the object. The keyword "new" is followed by the name of the class, which specifies the type of object that is to be created. After the class name, the constructor is called, which initializes the instance variables of the object.Example 1:class MyClass{ public MyClass(){ }}MyClass myObject = new MyClass();Example 2:class Person{ String name; int age; public Person(String n, int a){ name = n; age = a; }}Person p1 = new Person("John", 30);
Instance variables of reference type are passed as a reference to the object, whereas primitive type variables are passed as a value. When a reference variable is passed as a parameter to a method, the reference to the object is passed instead of the object itself. This could result in unexpected changes to the object in the main program. The "clone()" method is used to create a duplicate copy of the object. The keyword "new" is used to create an object and to initialize the instance variables of the object.
To learn more about instance variable visit:
brainly.com/question/20658349
#SPJ11
