Write an equation that shows the formation of a copper (ii) ion from a neutral copper atom

Number of photons emitted = 2167200 photons/second

 Photons are particles of light that are emitted from atoms. They exist in a wide range of energies and wavelengths and can be emitted from both natural and artificial sources.

Photons are emitted when an electron in an atom moves from a higher energy state to a lower energy state.

1. Number of photons emitted = (Energy conversion efficiency) × (Power in Watts) × (eV/J) × (Avogadro's number) × (1/Energy of band gap)

Number of photons emitted = (0.9) × (50) × (1.6 x 10-19/1) × (6.02 x 1023) × (1/2.0)

Read more about photons emitted

https://brainly.com/question/3962600

#SPJ1

Both sugar and water are made of molecules and atoms.

A tiny or very small particle of a chemical element is known as an atom, which may or may not present independently. Molecules are defined as a groups of atoms has the bond fuse together which represents the smallest part of a compound. Two or more identical or different atoms are chemically bonded with each other.

The smallest particle of a material that has all of the physical and chemical properties of the material. Molecules are made up of only one or more than one atom. Sugar has a solid state of matter whereas water has a liquid state of matter. Sugar which is a solid has more hard particles as compared to water whereas a liquid has less compact particles.

So we can conclude that both are made of molecules and atoms.

Learn more about atoms here: https://brainly.com/question/6258301

#SPJ1

17g is the mass of of silver nitrate will react with 5.85 g of sodium chloride to produce 14.35 g of silver chloride and 8.5 g of sodium nitrate.

Silver nitrate is indeed a chemical compound having the formula AgNO[tex]_3[/tex]. It serves as a flexible precursor to a wide range of other silver compounds, including those employed in photography.

It is significantly less light sensitive than halides. It was originally known as lunar caustic because ancient alchemists connected silver with both the moon and termed it luna.

According to law of conservation of mass

Total mass of reactants = Total mass of products

Mass of Silver nitrate + 5.85g= 14.35g+ 8.5g

Mass of silver nitrate = 22.85-5.85= 17g

Therefore,  17g is the mass of silver nitrate.

To learn more about silver nitrate, here:

https://brainly.com/question/29627918

#SPJ9

Both dogs used the same amount of work, and the brown dog used less power.

Work and power are both concepts in physics that are related to the transfer of energy, but they are not the same thing. Work refers to the amount of energy transferred to or from an object as a result of a force acting on it over a certain distance, whereas power refers to the rate at which work is done.

In other words, work is a measure of the total energy transferred, while power is a measure of how quickly that energy is transferred. Mathematically, work is defined as the product of the force applied to an object and the distance over which that force is applied, while power is defined as the rate of doing work, or the amount of work done per unit time.

Learn more about power:https://brainly.com/question/11579192

#SPJ1

All the possible structural isomers for the molecular formula C₆H₁₂ are given here. All of them has the same number of carbon and hydrogen atoms but with different structures.

Isomers are compounds with the same chemical formula but different structures, spatial conformation, geometry, functional groups  etc. There are are different kinds of isomers.

Structural isomers are compounds with same formula but different structures. In the case alkanes, alkenes or alkynes, the position of the branches or groups attached can be of different but formula stay the the same.

Here, the compound with the formula, C₆H₁₂ have structures similar of alkenes and can have ring structures as shown in the image. The position of the double bond or the branches are different in each isomers.

Find more on structural isomers:

https://brainly.com/question/2005530

#SPJ9

you gonna get magnesium bromide MgBr2

Magnesium is metal and bromine is non-metal, and the combination of the two produces an ionic compound called magnesium bromide

Used as a catalyst.

Used for position-specific analysis of Triglycerols.

Widely used as an anticonvulsant for the treatment of neuropathy.

It is used as a mild sedative.

The independent variable is the the widths of the wires.

In an experimental setup, the independent variable is the variable that is manipulated or changed by the researcher. It is also referred to as the "predictor variable" or the "explanatory variable."

The idea behind manipulating the independent variable is to observe its effect on another variable, which is called the dependent variable. The dependent variable is the variable that is thought to be affected by the independent variable.

Learn more about independent variable:https://brainly.com/question/29430246

#SPJ1

Answer:

In order to calculate the theoretical yield of Aluminum Sulfate in this reaction, you would need to know the balanced chemical equation for the reaction between Copper (II) Sulfate and Aluminum.

Without that information, it is not possible to determine the amount of Aluminum Sulfate that would be produced from 2.50 grams of Copper (II) Sulfate.

Explanation:

The new pressure of the gas is 203 psi.

Boyle's law is a gas law that states that the pressure of a gas is inversely proportional to its volume at a constant temperature. The law can be expressed mathematically as:

P * V = k

where P is the pressure of the gas, V is its volume, and k is a constant. This law states that as the volume of a gas increases, its pressure decreases, and as its volume decreases, its pressure increases.

We know that;

P1V1 = P2V2

P1 = initial pressure

P2 = final pressure

V1 = initial temperature

V2 = final temperature

P1 = 29

V1 = V

P2 = ?

V2 = P/7

Then;

P2 = P1V1/V2

P2 = 29 * V/V/7

P2 = 203 psi

Learn more about gas pressure:https://brainly.com/question/18124975

#SPJ1

The percent fat, carbohydrates and protein for this sandwich are   18%, 56.4% and 24.71% respectively.

The mass percent might be used to denote a degree. Furthermore, it defines the component during a certain mixing. The solution composition usually frequently defined in terms of mass percentage.

It represents the amount of solute contained in a constant amount of solution. The quantity of solutes can be stated in terms of mass or moles.

Mass percent of fat= (10.1/ 53.7)×100=18%

Mass percent of carbohydrate = (30.3/ 53.7)×100=56.4%

Mass percent of protein= (13.3 / 53.7)×100=24.71%

Therefore,  the percent fat, carbohydrates and protein for this sandwich are   18%, 56.4% and 24.71% respectively.

To learn more about mass percentage, here:

https://brainly.com/question/28998211

#SPJ1

The system developed to extinguish fires in commercial cooking operations, reducing the temperature of the burning liquid is the "wet chemical extinguishing system".

This system is specifically designed to suppress fires that start in deep fryers and other cooking appliances commonly found in commercial kitchens. The wet chemical extinguishing system is a specialized fire suppression system that uses a specially formulated liquid agent to extinguish fires by cooling the fuel and preventing re-ignition. The liquid agent is discharged in a fine mist, which blankets the burning fuel and cools it to below its ignition temperature. This helps prevent the fire from spreading and re-igniting, and reduces the potential for injury or property damage. Other fire suppression systems temperature that are commonly used include the combination system, which combines wet chemical and dry chemical agents, the dry pipe system, which is a type of sprinkler system that uses pressurized air to prevent water from entering the pipes until a fire is detected.

learn more about temperature   here:

https://brainly.com/question/11464844

#SPJ4

If each household emits 60 metric tons of CO2 on average, and 21 metric tons are from transportation, the remaining CO2 emissions from a household would be 60 - 21 = 39 metric tons.

However, it is not possible to determine how many metric tons of CO2 are specifically from the use of buses, as this information is not specified. The 21 metric tons of CO2 emissions from transportation could come from a variety of sources, including buses, cars, trains, and airplanes. Without further information, it is not possible to determine exactly how many of the 21 metric tons of transportation-related CO2 emissions are specifically from the use of buses. To determine this information, you would need data that breaks down the total transportation-related CO2 emissions into smaller categories, such as emissions from individual modes of transportation. So, while it's known that each household emits an average of 60 metric tons of CO2 per year, with 21 of those metric tons being from transportation, it is not possible to determine the exact amount of CO2 emissions from the use of buses without additional information.

To learn more about transportation refer to this link

https://brainly.com/question/28817407

#SPJ4

The mass (in grams) of Mn present in 1.07×10²⁴ atoms is 97.735 grams

We'll begin by obtaining the number of mole of Mn. This can be obtained as follow:

From Avogadro's hypothesis,

6.02×10²³ atoms = 1 mole of Mn

Thus,

1.07×10²⁴ atoms = (1.07×10²⁴ atoms × 1 mole) / 6.02×10²³ atoms

1.07×10²⁴ atoms = 1.777 moles of Mn

Now, we shall determine the mass (in grams) of Mn. Details below:

Mole = mass / molar mass

Cross multiply

Mass = Mole × molar mass

Mass of Mn = 1.777 × 55

Mass of Mn = 97.735 grams

Thus, from the above calculation, it is evident that the mass of Mn is 97.735 grams

Learn more about mass:

https://brainly.com/question/6613610

#SPJ1

To determine how many grams of copper (I) nitrate (CuNO3) are required to produce 44.00 grams of aluminum nitrate (Al(NO3)3), we need to use stoichiometry and the balanced chemical equation that relates the two compounds.

The balanced chemical equation for the reaction is: 3CuNO3 + 2Al -> 3Cu + 2Al(NO3)3 This equation tells us that 3 moles of CuNO3 react with 2 moles of Al to produce 2 moles of Al(NO3)3 and 3 moles of Cu.

We can use this information to calculate the amount of CuNO3 required to produce 44.00 grams of Al(NO3)3 as follows: Calculate the molar mass of Al(NO3)3: Al(NO3)3 = 1(26.98) + 3(14.01 + 3(16.00)) = 213.00 g/mol

Convert the given mass of Al(NO3)3 to moles: moles Al(NO3)3 = 44.00 g / 213.00 g/mol = 0.2065 mol Use the stoichiometric ratio from the balanced chemical equation to determine the moles of CuNO3 required: 3 moles CuNO3 / 2 moles Al(NO3)3 = x moles CuNO3 / 0.2065 moles Al(NO3)3 x moles CuNO3 = 3/2 x 0.2065 mol = 0.3097 mol

By using the balanced chemical equation, we can relate the amount of one compound to the amount of another compound in the reaction. This allows us to use stoichiometry to calculate the amount of one compound required to produce a given amount of another compound.

Learn more about chemical equation here:

https://brainly.com/question/30087623

#SPJ4

The distance of the Earth from the sun in gigameters is 1.50 × 10⁻⁴ Gm

A unit conversion is the expression of the same property in a different unit of measurement. To convert kilometers to gigameters, you need to divide the number of kilometers by 10¹². Here's the formula: Gigameters = Kilometers / 10¹²

To convert the distance from kilometers to gigameters (Gm), divide the number of kilometers by 10¹².

So, 1.50 × 10⁸ km ÷ 10¹² = 1.50 × 10⁻⁴ Gm

Therefore, the distance from the Earth to the Sun is approximately 1.50 × 10⁻⁴ Gm.

Learn more on unit conversion here: https://brainly.com/question/17739692

#SPJ1

Spaced practice is a learning strategy where the time between learning sessions is increased over time.

In this approach, material is studied multiple times, with increasing intervals between each session. This type of practice is thought to enhance long-term retention and improve memory compared to massed practice, where all the material is studied in one single session.

Spaced practice is often used in education and training programs, especially for subjects that require memorization or recall of information. The idea behind spaced practice is that it allows time for the material to be consolidated in memory, rather than simply being repeated in short-term memory.

Learn more on spaced practice here: https://brainly.com/question/15547593

#SPJ1

Sodium chloride is more likely to dissolve in water because it is polar and is attracted to the polar molecules of water. On the other hand, butane is nonpolar and is not attracted to the polar molecules of water, so it is less likely to dissolve.

Sodium chloride, also known as table salt, has ionic bonds, meaning it is composed of positive and negative ions. The positive sodium ion and negative chloride ion are attracted to the polar water molecules, which have a positive charge at one end and a negative charge at the other. This attraction between the ions of salt and the polar water molecules leads to the dissolution of salt in water.

Butane, on the other hand, is a nonpolar substance. It is composed of nonpolar carbon and hydrogen atoms arranged in a linear structure. These nonpolar atoms are not attracted to the polar water molecules, so they do not dissolve well in water. In fact, butane is a hydrocarbon and is one of the components of natural gas. It is a fuel that is used for heating and cooking, and it is not soluble in water.

In conclusion, the solubility of a substance in water depends on its molecular structure and the type of bonds it contains. Polar substances tend to dissolve well in water because they are attracted to the polar water molecules, while nonpolar substances are less likely to dissolve because they are not attracted to the polar water molecules.

To know more about solubility, visit:https://brainly.com/question/28170449

The number of moles of cesium chloride produced 0.183 moles.

The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.

According to this question, the chemical formula for cesium chloride is CsCl. A chemist measured the amount of cesium chloride produced during an experiment. She finds that 30.8 g of cesium chloride is produced.

The molar mass of Cesium chloride is 168.36 g/mol

Moles = 30.8g ÷ 168.36g/lol

moles = 0.183 moles

Learn more about moles at: https://brainly.com/question/14919968

#SPJ1

Answer:

The molarity of a solution can be calculated by dividing the number of moles of solute by the volume of the solution in liters. To calculate the number of moles of solute in a solution, we first need to find the mass of the solute.

Since the concentration of the phosphate sample is given in mg/L (ppm), we can convert this to grams by multiplying by 0.001:

93.1 mg/L x 0.001 g/mg = 0.0931 g/L

Next, we can find the number of moles of solute by dividing the mass of solute by its molar mass:

0.0931 g ÷ (1 mol/94 g) = 0.000989 mol/L

Finally, we can find the molarity of the solution by dividing the number of moles of solute by the volume of the solution:

0.000989 mol ÷ (1 L) = 0.000989 M

H[tex]_2[/tex]O[tex]_2[/tex] + 2ICl [tex]\rightarrow[/tex] I[tex]_2[/tex] + 2OH⁻ is the net ionic equation for the given reaction.  The net ionic equation is frequently employed in acid-base neutralization, double displacement, and redox processes.

The net ionic equation is indeed a chemical equation for something like a reaction that only includes the species that are involved in the reaction. The net ionic equation is frequently employed in acid-base neutralization, double displacement, and redox processes.

In those other terms, the net ionic includes elements to water-based processes involving strong electrolytes.

H[tex]_2[/tex]O[tex]_2[/tex] + 2KI + 2HCl → 2H[tex]_2[/tex]O + I[tex]_2[/tex]+ 2KCl

H[tex]_2[/tex]O[tex]_2[/tex] + 2K⁺+2I⁻ + 2H⁺ + 2Cl⁻ → 2H⁺ + 2OH⁻ + I[tex]_2[/tex]+ 2K⁺ + 2Cl⁻

H[tex]_2[/tex]O[tex]_2[/tex] + 2ICl [tex]\rightarrow[/tex] I[tex]_2[/tex] + 2OH⁻

Therefore, H[tex]_2[/tex]O[tex]_2[/tex] + 2ICl [tex]\rightarrow[/tex] I[tex]_2[/tex] + 2OH⁻ is the net ionic equation for the given reaction.

To know more about net ionic equation, here:

https://brainly.com/question/28599017

#SPJ9

Answer: answer of the question is given below

Explanation:

Answer:

0.556 °C.

Explanation:

The freezing point depression of a solution can be calculated using the equation:

ΔTf = Kf x molality

Where ΔTf is the change in freezing point, Kf is the molal freezing point depression constant, and molality is the concentration of solute in mol/kg.

For magnesium chloride, Kf = 1.853 °C/molal. The molality of the solution can be calculated as follows:

molality = moles of solute / mass of solvent (in kilograms)

= 0.300 mol / (0.300 mol x 1000 g/mol) = 0.300 g/1000 g = 0.0003 kg/kg = 0.300 mol/kg

Now, substituting the values into the equation:

ΔTf = Kf x molality

= 1.853 °C/molal x 0.300 mol/kg

= 0.556 °C

So the freezing point of the 0.300 molal aqueous solution of magnesium chloride will be lower than the freezing point of pure water by 0.556 °C.



ALLEN

Prokaryotes, single-celled microorganisms without nuclei, include both bacteria and archaea.

Describe prokaryotes.

Prokaryotes are creatures without a nucleus or other organelles in their cells. Bacteria and archaea, two separate groupings of prokaryotes with allegedly independent evolutionary histories, are separated into. The majority of prokaryotes are tiny, single-celled creatures with a straightforward structure.

Both of them are microscopic, single-celled organisms with a wide range of forms. Bacteria and archaea both contain only one circular chromosome and no membrane-bound organelles. Archaea can contain flagella to help with movement, just like bacteria may.

Although there are many different shapes that bacteria and archaea can take, cocci, bacilli, and spirilli are the three that are most frequently found. In comparison to ordinary eukaryotes, bacteria and archaea are both typically tiny organisms.

To know more about Bacteria use link below:
https://brainly.com/question/8695285

#SPJ1

There are 0.610 moles of anion  which are present in 34.8 g of aluminium trifluoride  compound or AlF₃.

Mole is defined as the unit of amount of substance . It is the quantity which measures amount of substance of how many elementary particles are present in a  that given substance.

It is defined as exactly 6.022×10²³ elementary entities. The elementary entity can be a molecule, atom ion depending on which  type of substance is present. Amount of elementary entities which are  present  in a mole is called as Avogadro's number.

Number of moles of anion =mass/molar mass= 34.8/57= 0.610

Thus, there  are 0.610 moles of anion present in 34.8 g of aluminium trifluoride or AlF₃.

Learn more about moles,here:

https://brainly.com/question/26416088

#SPJ9

If commercial vinegar contains around 5 g of acetic acid (ch 3cooh) per 100 ml (1 l = 1000 ml) in solution, its molarity is 0.83 M.

Molarity is the amount of solute in moles per litre of solution.

Acetic acid's mass is reported as 5.0 g, and the solution's volume is 100.0 mL.

We divide the grammes of acetic acid by the molar mass in order to convert them from grammes to moles.

Acetic acid's chemical formula is CH₃COOH. Molar mass of acetic acid is equal to 2(12.01), 4(1.01), 2(16), 24.02, 4.04, and 32 grammes per mol. Acetic acid has a molecular weight of 5.0/60.06, or 0.083 moles.

Transform mL to L.

1 L equals 1000 mL, as we are aware.

The solution's molarity is equal to 0.083moles per 0.1000L, or 0.83M, thus we divide by 1000 to convert from mL to L. 100/1000 = 0.1000 L

Therefore, 0.83 M of acetic acid is present in vinegar.

Learn more about Molarity here:

https://brainly.com/question/9949541

#SPJ4

A weak acid or a weak base is a substance that partially ionizes to form two ions in aqueous solution.

What exactly do you mean by  aqueous solution?

An aqueous solution is basically a solution in which the solvent is water. Aqueous solutions can contain salts, acids, bases and other compounds. These solutions are often used in chemistry, biology and medicine for a variety of purposes.

HCN + H2O ⇌ H+ + CN- (weak acid)

HF + H2O ⇌ H+ + F- (weak acid)

NH4OH + H2O ⇌ NH4+ + OH- (weak base)

C5H5N + H2O ⇌ H+ + C5H5N- (weak acid)

To know more about aqueous solution,

https://brainly.com/question/19587902

#SPJ1

The concept Avogadro's law is used here to determine the number of moles of Helium. The number of moles of He is 0.0033 mol.

The Avogadro's law states that equal volumes of all gases under similar conditions of temperature and pressure contain equal number of molecules. Mathematically it is expressed as:

V ∝ n

1m³ = 1000 L

0.150 m³ = 150 L

0.90 m³ = 900 L

For two different gases, equation is:

V₁n₁ = V₂n₂

n₂ = V₁n₁ / V₂

= 150 × 0.0200 /  900

= 0.0033 mol

Thus the number of moles of 'He' is 0.0033 mol.

To know more about Avogadro's law, visit;

https://brainly.com/question/3491421

#SPJ1

Answer:

Organic solidarity

Explanation:

its right

There are 2.81 × 10^24 moles number of carbon atoms in a 140.0 g sample of glucose (C6H1206).

The term molar mass of a substance is defined as the mass in grams of one mole of the compound. In a substance, the amount of entities present e.g., atoms, molecules, ions. A mole of any substance is 6.022×10²³ molecules.

To calculate, we need to know the number of moles present in 140 grams of carbon.

number of moles = mass/molar mass

molar mass of glucose is = 180 g/mol

Therefore, the number of moles will be ;

140/180 = 0.7778 mole

1 mole of glucose contains 6 moles of carbon;

Then, 0.7778 moles will contain = 4.667 moles

the number of atoms in 1 mole is 6.02 × 10^23 atoms

The number of atoms in 4.667 moles will be :

4.667 × 6.02 × 10^23

= 2.81 × 10^24 atoms

Thus, 2.81 × 10^24 moles number of carbon atoms in a 140.0 g sample of glucose (C6H1206).

To learn more about the molar mass, follow the link;

https://brainly.com/question/12127540

#SPJ9

For a given mass of gas at a constant temperature, when volume decreases pressure increases.

For at a constant temperature, when mass decreases pressure increases.

According to Boyle's Law, at a constant temperature, the pressure of a gas is inversely proportional to its volume.

Thus, a decrease in the volume of a gas will result in an increase in pressure, assuming that the temperature and amount of gas remain constant.

Assuming that the temperature and volume remain constant, an increase in the mass of a gas will result in an increase in its pressure. This is because as the mass of the gas increases, the number of gas particles also increases, which leads to an increase in the frequency and force of their collisions with the container walls. These increased collisions result in an increase in the pressure of the gas.

Learn more about pressure and volume gases at: https://brainly.com/question/24719118

#SPJ1