Answer:
Graphitic carbon nitride (g-C3N4) is a rising two-dimensional material possessing intrinsic semiconducting property with unique geometric configuration featuring superimposed heterocyclic sp2 carbon and nitrogen network, nonplanar layer chain structure, and alternating buckling. The inherent porous structure of heptazine-based g-C3N4 features electron-rich sp2 nitrogen, which can be exploited as a stable transition metal coordination site. Multiple metal-functionalized g-C3N4 systems have been reported for versatile applications, but local coordination as well as its electronic structure variation upon incoming metal species is not well understood. Here we present detailed bond coordination of divalent iron (Fe2+) through micropore sites of graphitic carbon nitride and provide both experimental and computational evidence supporting the aforementioned proposition.
65g of nitric acid are produced in a reaction. 2.5g of platinum are added to the reaction vessel at the start of the reaction to act as a catalyst. How much platinum will there be left in the vessel at the end of the reaction?
Answer:
2.5 g of platinum
Explanation:
Recall that a catalyst is a specie added to a reaction system to increase the rate of reaction. A catalyst does not participate in the chemical reaction hence it remains unchanged at the end of the chemical reaction. A catalyst merely provides an alternative reaction pathway by lowering the activation energy of the reaction system. Hence a catalysed reaction usually proceeds faster with less energy requirement than the uncatalysed reaction.
Since the catalyst does not participate in the reactions and remains unchanged at the end of the reaction, the mass of platinum will remain the same (2.5g). The mass can only change if a specie participates in the chemical reaction. Hence the answer.
2.5 g of platinum will there be left in the vessel at the end of the reaction
The following information should be considered:
Since the catalyst does not participate in the reactions and remains the same at the end of the reaction, the mass of platinum will remain the same (2.5g). The mass can only change in the case when a specie participates in the chemical reaction.learn more: https://brainly.com/question/2514933?referrer=searchResults
What systems need to be in place to ensure fairness in healthcare?
Answer:
The Healthcare system should be a welcome place to the different tiers of people in the society. There should be zero form of discriminations and everyone should be should be treated in the same way. Defaulters should be frowned at and adequate punishments should be meted out. There should be strict accountability of the funds made available to the healthcare centers to prevent diversion and any corrupt practices. These systems need to be in place to ensure fairness in healthcare.
A(n) __________ can be added to milk to neutralize it.
How can you contribute at your own level to save the environment? Plz say the anwer
Answer:
Some things you could do are recycle more, contribute to organizations that support saving the environment, finding alternate transportation methods such as riding a bike or walking, and finally, you could volunteer.
Which of the following is not sublimable? * 1 point Dry ice Calcium chloride Ammonium chloride
fasttttt
Answer:
Calcium chloride
Explanation:
Sublimation is the process whereby a solid substance is converted to gas when heat is applied or when exposed to an environment with a higher temperature.
Solid normally gets converted to the liquid phase before reaching the gaseous phase but these substances gets converted from solid straight to gas
Solid—> Gas
Dry ice( solid CO2) and Ammonium chloride undergo sublimation while Calcium chloride doesn't.
What evidence did the team examine that matter is conserved when dry ice changes into a gas?
Answer:
Im not sure what you mean but I hope what I wrote helps you!
The Law of Conservation of Matter says that the amount of matter stays the same, even when matter changes form. Sometimes it may seem that matter disappears during a science experiment, but this law tells us that matter cannot magically appear or disappear, it simply changes from one form to another.
Explanation:
__C7H16+ ___O2=
CO2 + H20 how to balance this equation
Answer:
C7H16 + 11O2 = 7CO2 + 8H2O
Explanation:
Start by balancing the C and H in C7H16 by adding the coefficient of 7 for CO2 because there are 7 C's in C7H16. Similarly, since there are 16 H's in C7H16, balance it by adding the coefficient of 8 to the H2O, which will result in 16 H's.
Finally, add up the O's on the right side and balance it by adding the appropriate coefficient on the O2. On the right, there are 22 O's, so balance the equation by adding the coefficient of 11 on the left for the O2.
Kinetic energy definition
Answer:
kinetic energy. (General Physics) the energy of motion of a body, equal to the work it would do if it were brought to rest. The translational kinetic energy depends on motion through space, and for a rigid body of constant mass is equal to the product of half the mass times the square of the speed.
Answer:it is the simplest one
the energy possessed by a body due to its motion is called kinetic energy
K.E.=[tex]\frac{1}{2}[/tex]mv²
Match each element to the correct description of its usual behavior in a chemical reaction.Silicon (Si)Argon (Ar)Sodium (Na)Will lose electrons
Answer:
Sodium (Na) — Will lose electrons
Silicon (Si) — Will lose electrons
Argon (Ar) — No reaction
Hope this helps.
1.)A strong acid solution requires 3.2 grams of sulfuric acid (H2SO4). How many molecules of sulfuric acid are in the solution?
2.) While measuring out the sulfuric acid you accidentally spilled some of it! Before trying to clean it up you put some baking soda (NaHCO3) on to it neutralize it. If you scatter 7.8 g of baking soda on the acid how many moles of baking soda have you used?
Answer: 1. There are [tex]0.20\times 10^{23}[/tex] molecules of sulfuric acid in the solution.
2. 0.093 moles of baking soda have been used.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
1. [tex]\text{Number of moles of sulpfuric acid}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{3.2g}{98g/mol}=0.033moles[/tex]
1 mole of [tex]H_2SO_4[/tex] contains = [tex]6.023\times 10^{23}[/tex] molecules of sulfuric acid
Thus mole of [tex]H_2SO_4[/tex] contains = [tex]\frac{6.023\times 10^{23}}{1}\times 0.033=0.20\times 10^{23}[/tex] molecules of sulfuric acid
There are [tex]0.20\times 10^{23}[/tex] molecules of sulfuric acid in the solution.
2. [tex]\text{Number of moles of baking soda}=\frac{\text{Given mass}}{\text {Molar mass}}=\frac{7.8g}{84g/mol}=0.093moles[/tex]
0.093 moles of baking soda have been used.
Which one is NOT an acid?
A. H2S04 B. H2NO3 C. HCI D. NaOH
Which group is in the leftmost column on the periodic table?
alkali metals
a.pex
yes
Calculate the percent ionic, the percent covalent, and the bond length (in picometers) of a chemical bond between phosphorus and selenium.
Phosphorus—atomic radius: 109 pm; covalent radius: 106 pm; ionic radius: 212 pm.
Selenium—atomic radius: 122 pm; covalent radius: 116 pm; ionic radius: 198 pm.
98 percent ionic, 2 percent covalent, 410 pm
4 percent ionic, 96 percent covalent, 222 pm
2 percent ionic, 98 percent covalent, 222 pm
96 percent ionic, 4 percent covalent, 410 pm
Answer:
The correct option is;
4 percent ionic, 96 percent covalent, 222 pm
Explanation:
The parameters given are;
Phosphorus:
Atomic radius = 109 pm
Covalent radius = 106 pm
Ionic radius = 212 pm
Electronegativity of phosphorus = 2.19
Selenium:
Atomic radius = 122 pm
Covalent radius = 116 pm
Ionic radius = 198 pm
Electronegativity of selenium= 2.55
The percentage ionic character of the chemical bond between phosphorus and selenium is given by the relation;
Using Pauling's alternative electronegativity difference method, we have;
[tex]\% \, Ionic \ Character = \left [18\times (\bigtriangleup E.N.)^{1.4} \right ] \%[/tex]
Where:
Δ E.N. = Change in electronegativity = 2.55 - 2.19 = 0.36
Therefore;
[tex]\% \, Ionic \ Character = \left [18\times (0.36)^{1.4} \right ] \% = 4.3 \%[/tex]
Hence the percentage ionic character = 4.3% ≈ 4%
the percentage covalent character = (100 - 4.3)% = 95.7% ≈ 96%
The bond length for the covalent bond is found adding the covalent radii of both atoms as follows;
The bond length for the covalent bond = 106 pm + 116 pm = 222 pm.
The correct option is therefore, 4 percent ionic, 96 percent covalent, 222 pm.
What is a solvent?
A.always water
B.the liquid in the solution
C.the substance in which the solute dissolves
Answer:
C. the substance in which the solute dissolves
Explanation:
There are two terms in this... the solute and the solvent. The way I learned how to remember this is with a little pirate analogy: The loot (stolen treasure) always goes in the vent. So, the soLUTE goes in the solVENT.
Inorganic compounds which are found in the earth are called: minerals vitamins synthetics cement
Answer:
Minerals
Explanation:
I looked it up on google. Thanks.
The recommended dose of aspirin will yield approximately 100.0 micrograms/mL in the blood. How many molecules of aspirin (C9H8O4) are in a drop (0.100 mL) of blood?
Answer:
3.34x10¹⁶ molecules of aspirin are in a drop of blood
Explanation:
The recomended dose of aspirin in blood is 100.0μg/mL =
1x10⁻⁴g aspirin / mL of blood.
In a drop (0.100mL) there are:
0.100mL ₓ (1x10⁻⁴g aspirin / mL of blood) = 1x10⁻⁵g aspirin.
Molecular mass of aspirin is:
9C = 12.01g/mol ₓ 9 = 108.09g/mol
8H = 1.01g/mol ₓ 8 = 8.08g/mol
4O = 16g/mol ₓ 4 = 64g/mol
108.09 + 8.08 + 64 = 180.17g/mol
Thus, moles of aspirin in 1x10⁻⁵g are:
1x10⁻⁵g ₓ (1mol / 180.17g) = 5.55x10⁻⁸ moles of aspirin
In 1 mole, you have 6.022x10²³ molecules, thus:
5.55x10⁻⁸ moles of aspirin ₓ (6.022x10²³ molecules / 1 mole ) =
3.34x10¹⁶ molecules of aspirin are in a drop of blood
Which is the electron configuration for bromine?
Answer:
first answer
Explanation:
atomic number of bromine is 35
[tex]1{s}^{2} 2 {s}^{2} 2 {p}^{6} 3 {s}^{2} 3 {p}^{6} 3 {d}^{10} 4 {s}^{2} 4 {p}^{5} [/tex]
Answer:
1s22s22p63s23p64s23d104p5
Explanation:
;)
Hexane is a chain organic compound that has the formula C6H14. What type of organic compound is hexane? Alcohol Amine Ether Hydrocarbon
Answer: [tex]C_6H_{14}[/tex] is a hydrocarbon.
Explanation:
Alcohols are the compounds which contain -OH as the functional group. Example: [tex]CH_3OH[/tex]
Amine are the compounds which contain [tex]-NH_2[/tex] as the functional group. Example: [tex]CH_3NH_2[/tex]
Ether are the compounds which contain [tex]ROR[/tex] as the functional group. Example: [tex]CH_3OCH_3[/tex]
Hydrocarbons are defined as the compounds in which bonds are present between carbon and carbon atoms. Hydrocarbons with single bond between carbon and carbon atoms are called as alkanes.The general formula for alkanes is [tex]C_nH_{2n+2}[/tex] Example: [tex]C_6H_{14}[/tex] which is named as hexane.
Answer:
D) Hydrocarbon
Explanation:
Completed the test and got it right
The sodium salt, NaA, of a weak acid is dissolved in water; no other substance is added. Which of these statements (to a close approximation) is true?
Answer:
Your question is somewhat poorly worded, even so what I can contribute is the statement is false, since the salt is sodium chloride, where its severe chemical formula NaCl, is a SALT not an acid and if it dissolves in water, seriously the solute of a solution, where water plays the role of the solvent
Explanation:
Sodium chloride is a binary salt, very easy to dissolve in water, it is also called the famous table salt, since it can be ingested in food even though it is not so recommended against high blood pressure conditions.
Seleccione una actividad humana y el impacto generado debe realizar un resumen sobre la actividad seleccionada y dos medidas de prevención para evitar la alteración de los ciclos.
Answer:
Industrial activity increases the emission of greenhouse gases in the atmosphere, especially carbon dioxide (CO2), and it negatively affects climate by increasing global warming.
Two actions to face the global warming:
1- To substitute the use of fossil fuels by alternative clean energy sources such as, for example, hydroelectric, geothermal, solar and wind energy resources.
2- The government's policies decided to develop electric cars and to stimulate healthy habits such as walking instead of the use of conventional fossil-fueled transport modes.
We know from the relative amounts of 16O and 18O that global temperatures and global climate have changed over time. Why is it important for scientists to be able to explain how they know that climate has changed over time and that they are able to repeat experiments that support this information?
Answer:
In order to take steps by humans for controlling the change in climate.
Explanation:
It is important that scientist find out the change which occurs in the climate with the passage of time by performing experiments and also repeat the experiments in order to verify their findings. Due to these experiments, scientists also find out the reasons behind of climate change which enable us to take steps in preventing the change that occurs in the environment. it is also important for scientists to be able to explain how they know that climate has changed over time in order to explain that he is not assuming or making predictions, he has to provide evidence for his statement which is only be possible through experiments.
explain why we must balance all chemical equations
Answer:
The chemical equation needs to be balanced so that it follows the law of conservation of mass.
Explanation:
Explanation:
the chemical equation needs to be balance so that it follows the law of conservation of mass. a balance chemical equation occurs when the number of the different atoms of elements to the reactants side is equal to that of the product side. balancing chemical equation is a process of trial and error .
If the mass of a certain block is 500g, what is the weight of the block?
______________________________
Solution,
Mass=500g =500/1000=0.5 kg
gravity(g)=9.8m/s^2
Now,
Weight= m*g
= 0.5*9.8
=4.9 N
So the weight of the block is 4.9 Newton
hope it helps...
Good luck on your assignment
_______________________
How many grams of chlorine gas are needed to react with 3.5 liters of a 1.7 molar
potassium bromide solution?
Cl2 + 2 KBr - 2 KCl + Br2
Answer: 211.2 grams
Explanation:
To calculate the number of moles for given molarity, we use the equation:
[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution in L)}}[/tex] .....(1)
Molarity of [tex]KBr[/tex] solution = 1.7 M
Volume of solution = 3.5 L
Putting values in equation 1, we get:
[tex]1.7M=\frac{\text{Moles of}KBr}{3.5L}\\\\\text{Moles of }KBr=\{1.7mol/L\times 3.5L}=5.95moles[/tex]
The balanced chemical reaction is:
[tex]Cl_2+2KBr\rightarrow 2KCl+Br_2[/tex]
According to stoichiometry:
2 mole of KBr requires = 1 mole of [tex]Cl_2[/tex]
5.95 moles of KBr requires = [tex]\frac{1}{2}\times 5.95=2.975[/tex] moles of [tex]Cl_2[/tex]
Mass of [tex]Cl_2=moles\times {\text {Molar mass}}=2.975mol\times 71g/mol=211.2g[/tex]
Thus 211.2 grams of chlorine gas are needed to react with 3.5 liters of a 1.7 molar potassium bromide solution
Which of the following statements is true?
A. Every organism is made of different elements.
B. All living things are made of the same elements.
C. Every species is made of different elements.
D. All matter is made of the same 10 elements.
Answer:
Every species is made of different elements.
Explanation:
Living organisms are classified by their species. Species refer to a group of closely related individual organisms which are callable of interbreeding with each other and exchanging genetic material.
Member of a species have similar genetic make up and often look alike, it is the lowest taxonomic rank of closely related organisms.
Members of of different species are often composed of different elements. Since individual organisms are members of a given species, we can say that every species of organisms are made up of different elements.
When 0.3 moles of acetylene is burned , total mole number of the products will be? a- 0.30 mol b-0.60 mol c-0.75 mol d-0.90 mol e- 1.2 mol
Answer:
d. 0.9 mol
Explanation:
On this case we have to start with the formula of acetylene:
[tex]C_2H_2[/tex]
Now we can write the chemical reaction of combustion:
[tex]C_2H_2~+~O_2~->~CO_2~+~H_2O[/tex]
The next step is to balance the reaction:
[tex]2C_2H_2~+~5O_2~->~4CO_2~+~2H_2O[/tex]
The molar ratio between [tex]C_2H_2[/tex] and [tex]CO_2[/tex] is 2:4, so:
[tex]0.3~mol~C_2_H_2\frac{4~mol~CO_2}{2~mol~C_2H_2}=0.6~mol~CO_2[/tex]
The molar ratio between [tex]C_2H_2[/tex] and [tex]H_2O[/tex] is 2:2, so:
[tex]0.3~mol~C_2_H_2\frac{2~mol~H_2O}{2~mol~C_2H_2}=0.3~mol~H_2O[/tex]
The total moles would 0.6 + 0.3=0.9 moles.
I hope it helps!
determine the mass of a copper (ii) trioxonitrate(v) that will be formed when 15g og copper is added to excess dilute trioxonitrate(v) acid
Explanation:
Copper(II) carbonate basic, CuCO3•Cu(OH)2(s), is the dull green colour that forms on copper roofs. Copper oxidises in the air to form an approximately equimolar mixture of CuCO3 and Cu(OH)2.The percentage of CuCO3 in the
which of these methods could are used to separate an insoluble solid and soluble solid
Answer:
To separate an insoluble solid from a soluble solid: Mixing the mixture with water, filtering out the insoluble solid, and then evaporating the water to isolate the soluble solid.
Explanation:
Answer:
Mixing the mixture with water, filtering out the insoluble solid, and then evaporating the water to isolate the soluble solid
Why would we want to correct for water vapor?
Answer:
The vapor pressure due to water in a sample can be corrected for in order to get the true value for the pressure of the gas.
Explanation:
The nickname __________ was given to people from southern states that supported reconstruction laws that helped African Americans.
A. "copperhead"
B. "scalawag"
C. "carpetbagger"
D. "Radical Republican"
