The correct answer is Oslo. Oslo is the search result in row 15. This is because the billing city column's duplicate values are removed by the DISTINCT clause, and the ORDER BY clause arranges the outcomes according to invoice ID.
The result set may be sorted in either ascending or descending order using the ORDER BY keyword. Records are typically sorted using the ORDER BY keyword in ascending order. Use the DESC keyword to sort the data in descending order. With the ORDER BY clause in the Select statement, we may arrange the results in either ascending or descending order. To discover all sequences available to the schema user, use the select sequence name from all sequences; query. Numbers can be arranged in ascending order, from least value to highest value. The arrangement is left to right.
To learn more about column's click the link below:
brainly.com/question/14744689
#SPJ4
Two concurrent application, a1 and a2, execute the equence of intruction (j1, j2, j3) and (k1, k2, k3), repectively. Execution witche between the application whenever a timeout interrupt occur or when one application terminate. If a2 tart, and interrupt occur after intruction k2 and j1, then what i the order in which the 6 intruction will execute?
Two concurrent applications a1 with a sequence of instructions (j1, j2, j3) and a2 with a sequence of instructions (k1, k2, k3). The order in which the 6 instructions will be executed is: k1, k2, j1, k3, j2, j3
A concurrent application means that that application is working on more than one task at the same time. If the computer only has one CPU, the application may not operate on more than one task at the same time, yet multiple tasks are being processed at the same time inside the application. It does not complete one work before beginning the next.
In this case there are two applications with the sequence of instructions:
application a1 = (j1, j2, j3)
application a2 = (k1, k2, k3)
The applications will be switched if one of these two conditions occurs:
- a timeout interrupt
- one application terminate
Now a2 starts. It means the instruction starts from k1, then k2.An interrupt occurs after instruction k2. It means the applications switches to a1. The instruction starts from j1.An interrupt occurs after instruction j1. Then the applications switch again to a2. The last instruction executed in a2 was k2, hence, now it executes instruction k3.After k3, it means application a2 terminates. Hence, it switches to a1 and execute j2, j3.Therefore, the order of the executed instruction is: k1, k2, j1, k3, j2, j3
Learn more about computer instruction here:
https://brainly.com/question/14465281
#SPJ4
In this lab, you'll practice creating classes and objects, using ArrayList objects, and working
with interacting objects (with some nice visuals). Even better, you'll be working with circles,
widely considered to be the roundest of all two-dimensional shapes.
1. Import the starter code to begin. Instructions (if needed), for your IDE of choice:
a. Jgrasp:
i. Download the starter code folder from the website (Download -> Direct download).
ii. Extract (unzip) the downloaded folder (right-click -> Extract all).
iii. Copy the entire (unzipped) folder to your H: drive; rename it in the usual fashion.
b. Eclipse:
i. In Eclipse, create a new Java project named in the usual fashion.
ii. Download the starter code folder from the website (Download -> Direct download).
iii. Extract (unzip) the downloaded folder (right-click -> Extract all).
iv. Drag and drop the unzipped materials as follows:
1. Drag the source (*.java) files into the "src" folder.
2. See here for help (don't worry about text files): youtu.be/LOSICIeP6Ko
2. Create a class Circle.java which is a simple abstraction of an on-screen circle (image). A Circle
should (initially) have the following:
int x and int y The center point of the circle's on-screen location. These values represent
the circle's (initial) location on screen.
int radius The radius of the circle.
Color color The color of the circle. Color is a class that is built into Java, a software
abstraction of color. You can create a new color using Color's
three-parameter constructor (e.g. new Color(50, 100, 150)), where
each integer is a value 0-255 (corresponding to red, green, and blue
components, respectively). There are also pre-built colors in the Color class
that you can use, e.g. Color.RED or Color.BLACK. Import:
java.awt.Color.
3. Write Circle's 4-parameter constructor. Give the parameter variables real good names.
4. A Circle is responsible for drawing itself. Write a void draw() method that displays the circle on
screen using the StdDraw.java graphics library (included in starter code). Use the following:
StdDraw.setPenColor(color); //set the current color of the drawing window
StdDraw.filledCircle(x, y, radius); //draw a filled circle at , diam of radius*2
Page 1 of 5
5. The CircleAnimations class performs some on-screen animations using Circle objects; we say
CircleAnimations is a client of the Circle class.
a. CircleAnimations' constructor has been written for you. Nice! Look it over so you know what
variables a CircleAnimations object will have. For example, this class maintains a list of all the
circles currently in the animation.
6. In CircleAnimations, write a method void drawCircles() that will iterate through all objects in
the circles list and draw them to the screen. The drawCircles method should be called last
from any method that adds circles to the list or makes changes to the circles so that the results
appear on screen. You don't need to test this method quite yet.
7. In CircleAnimations, write a method void addCircles() that will add three randomly colored
circles with random locations to the circles list. Note: The size of the drawing window is saved
into CircleAnimations' size instance variable. Choose a random radius range you feel best
represents you as a person.
In this workshop you will practice creating classes and objects, using Array.
List objects and working with interactive objects (with nice visual effects). You'll also work with circles, widely considered to be the roundest of all two-dimensional shapes. First, import your startup code. Instructions (if required) for the selected IDE: a. Jack: Me. Download the boot code folder from the website (Download -> Direct Download).ii. Extract (extract) the downloaded folder (right click -> extract all).iii. Copy the entire folder (unzipped) to drive H:; Rename it as usual. Eclipse: i. In Eclipse, create a new Java project with the usual name. ii. Download the initial code folder from the website (Download -> Direct Download).iii. Extract (extract) the downloaded folder (Right Click ->Extract All).iv. Drag the extracted materials as follows Drag & Drop: 1. Put the source files (*.java) in the "src" folder. Here's some help (don't worry about text files): youtu.be/LOSICIeP6Ko 2. Create a Circle.java class that is a simple abstraction of a circle (image) on the screen. The circle should (initially) have the following values: int x and int y The center of the circle's position on the screen. These values represent the starting position of the circle on the screen. In this workshop you will practice creating classes and objects, using Array List objects and working with interactive objects (with nice visual effects). You'll also work with circles, widely considered to be the roundest of all two-dimensional shapes. First, import your startup code. Instructions (if required) for the selected IDE: a. Jack: Me. Download the boot code folder from the website (Download -> Direct Download).ii. Extract (extract) the downloaded folder (right click -> extract all).iii. Copy the entire folder (unzipped) to drive H:; Rename it as usual. Eclipse: i. In Eclipse, create a new Java project with the usual name. ii. Download the initial code folder from the website (Download -> Direct Download).iii. Extract (extract) the downloaded folder (Right Click ->Extract All).iv. Drag the extracted materials as follows Drag & Drop: 1. Put the source files (*.java) in the "src" folder. Here's some help (don't worry about text files): youtu.be/LOSICIeP6Ko 2. Create a Circle.java class, which is a simple abstraction of a circle (image) on the screen.
The circle should (initially) have the following values: int x and int y The center of the circle's position on the screen. These values represent the starting position of the circle on the screen.
To know more about objects visit:
brainly.com/question/14964361
#SPJ4
Problem 3 2 in. 2 in. 2 in. For the area shown, a. Locate the centroid. b. The moment of inertia 1, with respect to an axis through the centroid that is parallel to side AB c. The corresponding radius of gyration Rex with respect to an axis through the centroid that is parallel to side AB. 1 in. 3 in A B
Knowing the mass of the I section's centre of mass is necessary to calculate the moment of inertia of the I section.
Define centroid?A body's geometric centre is known as a centroid. It alludes to the uniform density object's c, or centre of gravity.
A body's centroid is the location where the volume on each side is equal. A solid body made of a single material has its mass at its centroid. The centroid and centre of mass of a body are identical if its mass is dispersed evenly.
The centroid is the object's focal point. The centroid of a triangle is the location where the three medians of the triangle intersect. The intersection of all three medians is another definition for it.
To learn more about centroid refers to:
https://brainly.com/question/29868871
#SPJ4
An ultrasonic occupancy sensor emits high-power, low-frequency sound waves and
listens for a phase shift in the reflected sound returning to the sensor, which
indicates a moving target.
True
False
The correct answer is False. An ultrasonic occupancy sensor emits high-power, low-frequency sound waves andlistens for a phase shift in the reflected sound returning to the sensor, whichindicates a moving target.
Simply said, ultrasound is sound that is audible to humans yet has a frequency higher than 20 kHz.Ultrasound is employed at frequencies up to several GHz at the high end of the spectrum. Ultrasonic equipment is used for both object detection and distance measures. In medicine, sonography and ultrasound imaging are often employed. Ultrasound is used to find hidden faults in goods and buildings during nondestructive testing.Ultrasonic sensors operate by discharging sound waves at a frequency that is inaudible to humans.
To learn more about ultrasonic click the link below:
brainly.com/question/21336084
#SPJ4
The composite plate is made from both steel (A) and brass (B) segments. Take ?st = 7.85 Mg/m3 and ?br = 8.74 Mg/m3. Suppose that L = 160 mm . (Figure 1)
Determine the mass. Determine location (x¯, y¯, z¯) of its mass center G.
Mass of composite plate is 8.092 Mg and location (x, y, z) of its mass center G is:
x = 76 mm
y = 0
z = 0
What is Mass of a composite plate?The mass of the composite plate can be determined by finding the mass of each component (steel and brass) and then adding them together.
Since we know the densities of both materials (st = 7.85 Mg/m3 and br = 8.74 Mg/m3), we can calculate the mass of each component.
For steel, we multiply the density by the area:
Mass of steel = (0.2)(7.85) = 1.57 Mg
For brass, we multiply the density by the area:
Mass of brass = (0.8)(8.74) = 6.992 Mg
Now add the two masses together:
Mass = A.st + B.br = 1.57 + 6.992 = 8.092 Mg
The location of the mass center (G) can then be determined using the formula:
x¯ = (A.Axbar) + (B.Bxbar) = (0.2)(100) + (0.8)(60) = 76 mm
y¯ = (A.Aybar) + (B.Bybar) = (0.2)(0) + (0.8)(0) = 0 mm
z¯ = (A.Azbar) + (B.Bzbar) = (0.2)(0) + (0.8)(0) = 0 mm
These values give us the location of the mass center G.
To learn more about composite plate refer :
https://brainly.com/question/13151130
#SPJ4
canada has proposed an action plan to address climate change and air pollution. the action plan will reduce the impact of greenhouse gases and pollutants on the environment and human health. which of the following claims about the canadian action plan is best supported by the data in the graph? responses the plan encourages the transition from electricity generation from nuclear power to electricity generation from cleaner-burning natural gas. the plan encourages the transition from electricity generation from nuclear power to electricity generation from cleaner-burning natural gas. the plan focuses on increasing regulation on installation and maintenance of catalytic converters in vehicle exhaust systems. the plan focuses on increasing regulation on installation and maintenance of catalytic converters in vehicle exhaust systems. the plan supports phasing out traditional coal power plants and transitioning to sources like hydroelectricity, wind, and solar power. the plan supports phasing out traditional coal power plants and transitioning to sources like hydroelectricity, wind, and solar power. the plan provides a strategy for reducing the amount of plastic wastes in landfills through the production of long-lasting and durable plastics.
The plan supports phasing out traditional coal power plants and transitioning to sources like hydroelectricity, wind, and solar power is best supported by the data in the graph.
What is hydroelectricity?
Hydroelectricity is a type of renewable energy that is generated by the movement of water. It is created by capturing the kinetic energy of the moving water and converting it to electrical energy. This is done by building dams on rivers or streams and using the pressure created by the water to turn turbines, which are connected to generators that transform the energy into electricity. This electricity can then be used to power homes and businesses.
The graph shows that the Canadian plan encourages the transition from electricity generation from nuclear power, coal, and oil to cleaner-burning natural gas, hydro, wind, and solar energy sources. This clearly demonstrates that the plan supports phasing out traditional coal power plants and transitioning to sources like hydroelectricity, wind, and solar power.
To learn more about hydroelectricity
https://brainly.com/question/15570084
#SPJ4
Assign jsonObject with a JSON object with properties: userName (a string), studentAge (a number) and userSiblings (an array of strings). Note: The content of the properties doesn't matter.
var jsonObject;
jsonObject = {
userName: "John Doe",
studentAge: 21,
userSiblings: ["Jane", "Jack", "Jim"]
};
What is JavaScript programming language?Interactive websites can be made using the scripting language JavaScript. It is the HTML and Web programming language.
JavaScript is used to control websites and web server software as well as to create games and make web applications more interactive.
JavaScript is an interpreted language, which means that a computer can read it and comprehend it without having to compile it into a programme. As an object-oriented language that is made for working with objects, JavaScript is also capable of producing sophisticated applications.
This question is an example of JavaScript programming.
1. Start by declaring a variable, in this case "jsonObject":
var jsonObject;
2. Assign the variable a value of a JSON object with the properties of userName (a string), studentAge (a number), and userSiblings (an array of strings):
jsonObject = {
userName: "John Doe",
studentAge: 21,
userSiblings: ["Jane", "Jack", "Jim"]
};
3. The content of the properties does not matter, so you can change the values to whatever you like.
To learn more about JavaScript programming language refer :
https://brainly.com/question/13258974
#SPJ4
alternative sorting another sorting method, the counting sort, does not require comparison. instead, you create an integer array whose index range covers the entire range of values in your array to sort. each time a value occurs in the original array, you increment the counter at that index. at the end, run through your counting array, printing the value of each non-zero valued index that number of times.
A linear sorting algorithm with asymptotic complexity of O(n+k) is counting sort. An efficient and dependable sorting algorithm is the counting sort technique. Contrary to bubble and merge sort, counting sort does not rely on comparisons.
Unlike the widely used comparison sorts, the Radix sort is a non-comparative sorting algorithm. The radix sort has a worst-case time complexity of O(k•n), which is linear and preferred to sorts with logarithmic complexity. K is the number of iterations and n is the number of items. The speed differential between these two sorting algorithms is one of the most important ones. Because no comparison is made, non-comparison sorting is typically quicker than sorting. For comparison-based sorting algorithms, the speed restriction is O(NlogN), but for non-comparison-based methods, the speed limit is O(n), or linear time.
To learn more about counting sort click the link below:
brainly.com/question/15993052
#SPJ4
Determine the location { x }_{ c }x c of the centroid of the solid made from a hemisphere, cylinder, and cone.
Given:
a = 8080 mmmm
b = 6060 mmmmc = 3030 mmmm
d = 3030 mmmm
The correct answer is a = 8080 mmmm the location { x }_{ c }x c of the centroid of the solid made from a hemisphere, cylinder, and cone.
A hemisphere's curved surface area is equal to 2r2 square units. A hemisphere's entire surface area is 3 r 2 square units. The formula (23)r3 cubic units is used to calculate the volume of a hemisphere. As shown in the image, a right circular cylinder with length ′a′ and radius ′r′ has its origin as its centre and its axis along the x-axis such that one face is at x=+a/2 and the other is at x=a/2. When an electric field is operating parallel to the x-axis, E =E0i for values greater than zero and E =E0i for values lower than zero.
To learn more about hemisphere click the link below:
brainly.com/question/13625065
#SPJ4
A drawing requires a welder to make a 1/4"" fillet weld 16"" long. What is the volume of weld metal required to make this weld?
Making sure that the length of the weld is also given in centimetres, multiply the length of the weld by the area to determine the volume.
How much welding metal is needed to make this weld?Making sure that the length is also given in centimetres, multiply the weld's length by its area to determine the volume. In this example, the volume is 507 cubic centimetres per metre (cu. cm/m), which is how volume is typically expressed.
Add the weld strength and size together. Subtract the above product from the maximum permitted tensile stress. To determine how long the weld joint is, multiply the result by 0.707.
By multiplying the parcel's length, width, and height (all expressed in centimetres) and dividing the result by 5000, volumetric weight is most frequently calculated (some carriers use a divisor of 4000).
To learn more about volume refers to:
https://brainly.com/question/24086520
#SPJ4
the forked rod is supported by a collar at a, a thrust bearing at b, and a cable cd. determine the tension within cable cd, and the x, y, z components of reaction at supports a and b. the supports at a and b are in proper alignment and exert only force reactions on the rod
The equilibrium condition of forces and moment, which states that the total of the moment and forces is equal to zero, was applied in the aforementioned solution.
the wire is tense Tcd = 114.8912 N
Response forces
Ay = 60 N and Az = 0 at A
Bx = -20 N at B
By = -20 N\sBz = 0
When Newton's first law is true, the thing is in its equilibrium condition. When all external forces acting on an item (including moments) are balanced, that object is said to be in equilibrium in the reference coordinate system. This indicates that all external forces and moments acting on this item have a net effect of zero.
Newton's first law states that an object at rest will remain at rest, and an object in motion won't alter its velocity while the equilibrium condition is met.
Learn more about Equilibrium here:
https://brainly.com/question/13258910
#SPJ4
a student conducts an experiment to verify whether momentum is conserved for a situation in which a collision occurs. the two objects, object x and object y, travel toward each other, as shown in figure 1. after the collision, the two objects travel as shown in figure 2. data collected from three trials of this experiment are shown in the table. which of the following statements is correct based on the data?
Momentum is a vector quantity, hence the vector sum of the momenta should be compared. After the collision, the kinetic energy of the system in scenario 1 will be lower than that in scenario 2.
The system's momentum prior to the collision and the system's momentum following the collision should be same in order to demonstrate momentum conservation. In order to determine the ultimate velocities of Cart XX and Cart YY, a student must measure the beginning velocities of Cart XX and Cart YY. The velocities of each item may be measured before to, during, and after the impact thanks to this arrangement of motion detectors and their placements. (There are two exterior sensors)
To learn more about Momentum click the link below:
brainly.com/question/24030570
#SPJ4
1.4-9 two steel wires support a moveable overhead camera weighing w 5 28 lb (see fgure part a) used for close-up viewing of field action at sporting events. at some instant, wire 1 is at an angle a 5 228 to the horizontal and wire 2 is at angle b 5 408. wires 1 and 2 have diameters of 30 and 35 mils, respectively. (wire diameters are often expressed in mils; one mil equals 0.001 in.) (a) determine the tensile stresses s1 and s2 in the two wires. (b) if the stresses in wires 1 and 2 must be the same, what is the required diameter of wire 1?
Typically, it is either 1 mm or 0.5 mm. The experiment on how to use a screw gauge to measure the diameter of a given wire is shown below.
What is the required wire diameter 1?Calculating the equivalent cross sectional copper area is the proper way to determine the gauge of stranded wire. Measure the bare diameter of one strand first, then find the circular mils value in the row that corresponds to your measurement. The circular mils are then multiplied by the quantity of cable strands.
The area of a circle with radius r, or one with diameter d = 2r, is represented by the cross-sectional area of wire A:
A=πr2=π(d2) 2
By 3.14, or Pi, divide the wires' circumference. The equation circumference divided by pi equals diameter, or C ? = D, is used to calculate diameter from circumference. For the conversion, use 3.14 as a close approximation of Pi.
To learn more about wire refers to:
brainly.com/question/29134671
#SPJ4
tech a says that during a brake inspection, it is good practice to carefully peel back the dust boot from a wheel cylinder and see if there is any brake fluid behind the dust boot. a little brake fluid is normal. tech b says that during a brake inspection, it is good practice to carefully peel back the dust boot from a wheel cylinder and see if there is any brake fluid behind the dust boot. if there is, the wheel cylinder is starting to leak and should be replaced. who is correct
According to the question of wheel cylinder, tech b is correct that says during a brake inspection.
What is wheel cylinder?
A wheel cylinder is a component of a drum brake system in a vehicle. It is a cylinder that contains two pistons, one at each end, which press against the brake shoes when the brakes are applied. The pistons are connected to the brake pedal by a hydraulic system, and when the pedal is pressed down, hydraulic pressure is sent to the wheel cylinder, forcing the pistons outward and against the brake shoes. This action causes the brake shoes to press against the drum, slowing the vehicle down. Wheel cylinders are important in the proper functioning of a drum brake system, as they are responsible for the mechanical action of the braking process. They must be maintained regularly to ensure that they are functioning correctly and do not leak, as this can cause the brakes to fail.
To learn more about wheel cylinder
https://brainly.com/question/28542295
#SPJ4
vacuum leak testing is being discussed. technician a says to use a vacuum pump to check each component. technician b says to use an ultrasonic tester. who is correct?
The correct answer is technician a says to use a vacuum pump to check each component.
Vacuum pumps, in the simplest terms, are mechanical devices that make it possible to remove gas and air molecules from a sealed space to produce a space free of gas and/or air. Their main functions are to clean and seal. Depending on the medium being pushed through them, vacuum pumps are available in wet or dry versions. Follow these steps to test the pump: Close the valve between the system and the vacuum pump/micron gauge setup and start the vacuum pump before opening the vacuum pump and micron gauge to the system. Only the vacuum hose and micron gauge will be vacuumed as a result of this.
To learn more about vacuum click the link below:
brainly.com/question/29242274
#SPJ4
The factorial of a non-negative integer n, denoted by n!, is the product of all positive integers less than or equal to n For example, 5 ! = 5 x 4 x 3 x 2 x 1 = 120. The value of 0! is 1. Write a program, with comments, to do the following: 20 points Ask the user to enter a positive integer n. between 1 and 20 ; You may assume the user will enter a valid input Calculate the factorial of all numbers j (1 < j < n) from 1 - n (inclusive) For each j, print the value of j and j! with a suitable message and append each j! to a list called factorial list. Print the final factorial list with a suitable message Write function cal that takes the enter n and returns the factorial value, also act num write another function to print the factorial_list? -== RESTART: C:/Users/sanjay/Desktop/13.py= Please enter a positive integer between 1 and 20: 5 j = j = j 1 1 ! 1 = 2 2 2 3; 3 6 4 ! 24 j=4; = j =5 factorial_list = 5 ! 120 = [1, 2, 6, 24, 1201 > -== RESTART: C:/Users/sanjay/Desktop/13.py Please enter a positive integer between 1 and 20: 10 j = j = 1 1 ! 1 = 2: 2 ! 2 = 3 3 6 4 4 ! 24 = 5 ! j = 5 120 = 6 6 720 j = 7 7 5040 = 8 8 40320 = j = 9 j = 9! 362880 10 10 3628800 factorial list [1, 2, 6, 24, 120, 720, 5040, 40320, 362880, 3628800] = >
def cal(n): factorial = 1 for i in range(1, n+1): factorial = factorial * i return factorial def print_factorial_list(n): 'Prints the factorial list of the numbers from 1 to n' factorial_list = [] fοr j in range(1, n+1): factorial = cal(j) factorial_list.append(factorial) print("j = {}; j! = {}".format(j,factorial)) print("factorial list = {}".format(factorial_list)) n = int(input("Please enter a positive integer between 1 and 20: ")) print_factorial_list(n)
What is Python programming ?
High-level, interpreted Python is a general-purpose programming language that is easy to learn and use. Frequently used for automation and scripting, it is an easy-to-read object-oriented programming language.
Web development, data analysis, and artificial intelligence are just a few of the applications that people choose Python for.
It offers a broad selection of features, libraries, and frameworks that make it a strong option for numerous different kinds of development projects.
in this question
This is a program written in Python, a high-level, interpreted, and general-purpose programming language.
Steps:
1. Define a function called 'cal' that takes a number, n, as a parameter and returns the factorial value of n. The factorial of a number is calculated by multiplying all the integers from 1 to n.
2. Define a function called 'print_factorial_list' that takes a number, n, as a parameter and prints the factorial list of the numbers from 1 to n. This is done by looping over each number from 1 to n and calculating the factorial of each number and then appending it to a list called 'factorial_list'.
3. Ask the user to enter a positive integer n between 1 and 20.
4. Call the function 'print_factorial_list' with the user input, n, as the argument.
5. Print the factorial list with a suitable message.
Learn more about Python programming
https://brainly.com/question/19792191
#SPJ4
. The primary energy source that operates a building's air conditioning controller is typically electric,
pneumatic, or
A. thermostatic.
B. electronic.
C. hydraulic.
D. passive.
The X. 500 standard defines a protocol for a client application to access an X. 500 directory known as which of the following options?
a. DIB
b. DAP
c. DIT
d. LDAP
Answer:
Option B is the correct answer for the above question.
Explanation:
DAP is a protocol technology that is used for the client and discovered by X.500 in 1988. Its use for the client host on the network. The operation of this protocol is --- Read, Bind, Search, List, Compare, Add and Modify the data.
The above question asked about the protocol which is searched by X.500 and used for the clients. So the answer is DAP which is stated by Option B hence this option is correct while other is not because--
Option 'A' states about DIB which is not a protocol. It is used by X.500.
Option C states about DIT which is not used by X.500.
Option D states about LDAP which can be used for client or server.
To know more about protocol visit:
https://brainly.com/question/27581708
#SPJ4
The X. 500 standard defines a protocol for a client application to access an X. 500 directory known as DAP .
Option B is correct.
DAP is a client-oriented protocol technology that was discovered in 1988 by X.500. Its application to the network's client host. This protocol reads, binds, searches, lists, compares, adds, and modifies data.
The protocol that X.500 looks up and uses for clients was the subject of the aforementioned question. Therefore, Option B's answer, DAP, is correct, whereas Option 'A' is not because Option 'A' refers to DIB, which is not a protocol. X.500 makes use of this.
Option C mentions DIT, which X.500 does not employ.
Option D describes LDAP as a client or server protocol.
To know more about protocol :
brainly.com/question/27581708
#SPJ4
ATP is consumed in some of the steps of the glycolytic pathway. For the reactions shown, which consume ATP? glucose 6-phosphate fructose 6-phosphate dihydroxyacetone phosphate glyceraldehyde 3-phosphate 3-phosphoglycerate 2-phosphoglycerate phosphoenolpyruvate pyruvate 1,3-bisphosphoglycerate 3-phosphoglycerate 2-phosphoglycerate phosphoenolpyruvate glyceraldehyde 3-phosphate- 1,3-bisphosphoglycerate pyruvate lactate fructose 1,6-bisphosphate dihydroxyacetone phosphate + glyceraldehyde 3-phosphate glucose glucose 6-phosphate fructose 6-phosphate- fructose 1,6-bisphosphate
Investments are made during Stage 1. When glucose is transformed to fructose-1,6-bisphosphate, 2 molecules of ATP are used up. Inside the cell, glucose is imprisoned.
What number of ATP are there in the glycolytic pathway?In the course of glycolysis, glucose eventually decomposes into pyruvate and energy, yielding a total of 2 ATP (Glucose + 2 NAD+ + 2 ADP + 2 Pi --> 2 Pyruvate + 2 NADH + 2 H+ + 2 ATP + 2 H2O).
What action causes ATP to be used up?Processes include ion transport, muscular contraction, nerve impulse transmission, substrate phosphorylation, and chemical synthesis all use ATP as an energy source. There is a significant need for ATP in these and other processes.
To know more about molecules of ATP visit :-
https://brainly.com/question/12277357
#SPJ4
according to the tia chapter 1, which of the following are points and counterpoints regarding automated robotic machinery? (select all that apply.)
Creating robot swarms, enhancing navigation and exploration, and creating artificial intelligence that can "learn how to learn" and apply common sense to moral and social judgments are three tasks that concentrate on fundamental issues in robotics.
Which issues in robotics are the most pressing?Some of the key challenges that are currently resonating throughout the sector are data privacy and security. To complete their tasks, robots also require a variety of personal information and process sensitive data. The robot may utilize this private data in any way, but there is no way to know for sure.
What constitutes robots' primary flaw?Robots are frequently very expensive to purchase, maintain, require extra parts, and require programming to do the work. This is true of both the initial cost and ongoing costs.
To know more about robotic machinery visit:-
https://brainly.com/question/4130302
#SPJ4
The rigid bar EFG is supported by the truss system shown. Determine the cross-sectional area of member AE for which the normal stress in the member is 15 ksi. It is given that p=4200 lb. 6 bula P 4f74f- 4f- The cross-sectional area of member AE is i n?
The physiological cross-sectional area (PCSA) of a muscle, typically at its biggest point, is the area of the cross section of a System taken perpendicular to its fibers.
It is frequently employed to explain how pennate muscles contract. In contrast, the cross-sectional area is the area obtained when splitting the identical item into two. Cross sectional area refers to the size of that specific cross section. When an object is present at a location, its area is measured; however, when a 3D object is cut perpendicularly, its cross-sectional area is measured. Any rectangular solid, including a cube, has a volume equal to the base's area (length times width) times the height: V = l × w × h.
Learn more about system here-
https://brainly.com/question/27162243
#SPJ4
a heat engine with a thermal efficiency of 50% produces 200 kj of net work output. determine the heat input. multiple choice question. 200 kj 400 kj 50 kj 100 kj
If a heat engine with a thermal efficiency of 50% produces 200 kj of net work output, the heat input is 400 kJ.
The thermal efficiency of a heat engine is defined as the amount of usable work that is produced for a given amount of heat energy input.
Thermal efficiency is defined as a percentage of the quantity of heat delivered to the amount of heat obtained from the heat engine. If we offer 100% heat energy, it will be lowered to its lowest level once the procedure is completed. So, at any time, we will notice a difference between those two values, and that difference is nothing more than the thermal efficiency, which may be either 1% or 100%.
Mathematically,
efficiency = (output work/input energy) x 100%
Information available in the problem:
efficiency = 50%
output work = 200 kJ
Hence,
heat input = output work/efficiency
= 200 kJ/50%
= 200/0.5 = 400 kJ
Learn more about heat engine here:
https://brainly.com/question/13087750
#SPJ4
Using the method of joints, determine the force in each
member of the truss shown. State whether each member is in tension
(T) or compression (C).
Each member is in tension (T) or compression (C) is F_AB = F_AD = F_BC = F_CD.
What is compression?
Compression is the process of reducing the size of a file or data by encoding it using fewer bits. It helps to reduce the amount of space needed to store and transfer data. Compression techniques can be used to reduce the size of digital images, audio, video, and other types of data.
Given:
The truss shown consists of four members: AB, BC, CD, and AD.
Using the method of joints, we can determine the forces in each member by considering the equilibrium of each joint.
For joint A:
Sum of forces in the x-direction = 0
F_AB - F_AD = 0
F_AB = F_AD
For joint B:
Sum of forces in the x-direction = 0
F_AB - F_BC = 0
F_AB = F_BC
For joint C:
Sum of forces in the x-direction = 0
F_BC - F_CD = 0
F_BC = F_CD
For joint D:
Sum of forces in the x-direction = 0
F_AD - F_CD = 0
F_AD = F_CD
Therefore, we can conclude that the forces in each member are equal.
F_AB = F_AD = F_BC = F_CD
To learn more about compression
https://brainly.com/question/12976653
#SPJ4
if the technician believes that a hermetic compressor has permanently open internal overload protector, the technician should test the compressor while it is:
The technician should test the hermetic compressor while it is still cool if they think it has an inbuilt overload safeguard that is always open. A control string is a group of two or more switch contacts that are wired together to regulate a load in a circuit or group of circuits.
The load side of the contactor is where you should check the voltage input to a compressor. Even when the exterior unit is not functioning, consumers occasionally report that it is "buzzing." The solenoid coil for the reversing valve is typically to blame for this. Most of the time, it's a low voltage gadget (24 volts), and some of them are just louder than others. This is often normal.131. When bending soft copper to any radius, it is important to keep in mind that the cross sectional area must not be drastically decreased.
To learn more about hermetic compressor click the link below:
brainly.com/question/29063130
#SPJ4
Gae from the combution chamber were o hot that pipe around the nozzle carried coolant to keep the nozzle from melting. True or fale
TRUE . In outer space, the shuttle could generate more than half a million pounds of thrust.Pipes around the nozzle carried coolant that kept the nozzle from melting.
What exhaust system modifies the thrust direction to modify the direction of a rocket?The rocket's exhaust nozzle can rotate from to side in a gimbaled propulsion system.The thrust's direction changes in relation to the rocket's center of gravity when the nozzle is moved.
How can rocket motors avoid melting?The most popular method for preventing a liquid-fueled rocket engine form melting is regenerative cooling.In this procedure, the propellant passes partially or completely through the nozzle and combustion chamber walls before passing through the injector and entering the chamber.
To know more about combution visit:
https://brainly.com/question/30008016
#SPJ4
a body is kept moving in a circle of constant radius. if the speed of the body ius doubled, the centripetal acceleration will. the horizontal distance travelled by a projwectile is called the. the rising and falling times of a projectile are equal if the launching position is the landing position
The horizontal distance travelled by a projectile is called its range.
What is the acceleration?The rate at which velocity changes is called acceleration. Acceleration often indicates a change in speed, but not necessarily. An item that follows a circular course while maintaining a constant speed is still moving forward because the direction of its motion is shifting.acceleration: the rate at which the speed and direction of a moving object vary over time. A point or object going straight forward is accelerated when it accelerates or decelerates.zero,Acceleration is 0 in a circular motion that is uniform.The formula for centripetal acceleration is a=v 2 /R. Therefore, if v is doubled and R is cut in half, we have a ′ = 4v 2 /(R/2)=8a.
To learn more about acceleration refer to:
https://brainly.com/question/460763
#SPJ4
1.4-1 a hollow circular post abc (see figure) supports a load p1 51700 lb acting at the top. a second load p2 is uniformly distributed around the cap plate at b. the diameters and thicknesses of the upper and lower parts of the post are dab 51.25 in., tab 5 0.5 in., dbc 5 2.25 in., and tbc 5 0.375 in., respectively. (a) calculate the normal stress s ab in the upper part of the post. (b) if you want the lower part of the post to have the same compressive stress as the upper part, what should be the required magnitude of load p2?
A. The normal stress s ab in the upper part of the post is 1443 psi.
B. The required magnitude of load p2 is 1488 lbs.
What is stress?The force acting across a material's entire surface area is referred to as stress. Strain is the result of stress on the body. Deforming forces are those that alter the structure of an object. An object is deforested when we apply a deforming force to it. There will be an opposing force created inside the object called the restoring force that will work to restore the object to its original size and shape.
Newton's third law states that the restoring force will be equal in magnitude and directed in the opposite direction from the applied deforming force if there is no permanent change in the body's configuration. Therefore, stress is a measurement of the restoring force produced per unit area of the material.
Part A:
[tex]$$\begin{aligned}& \mathrm{P}_1=1700 \quad \mathrm{~d}_{\mathrm{AB}}=1.25 \quad \mathrm{t}_{\mathrm{AB}}=0.5 \\& \mathrm{~d}_{\mathrm{BC}}=2.25 \quad \mathrm{t}_{\mathrm{BC}}=0.375 \\& \mathrm{~A}_{\mathrm{AB}}=\frac{\pi\left[\mathrm{d}_{\mathrm{AB}}{ }^2-\left(\mathrm{d}_{\mathrm{AB}}-2 \mathrm{t}_{\mathrm{AB}}\right)^2\right]}{4} \\\\\end{aligned}$$[/tex]
[tex]\begin{aligned}\\& \mathrm{~A}_{\mathrm{AB}}=1.178 \quad \sigma_{\mathrm{AB}}=\frac{\mathrm{P}_1}{\mathrm{~A}_{\mathrm{AB}}} \\& \sigma_{\mathrm{AB}}=1443 \mathrm{psi} \quad \leftarrow\end{aligned}$$[/tex]
the normal stress s ab in the upper part of the post is 1443 psi.
Part B
[tex]\begin{aligned}\\& \mathrm{A}_{\mathrm{BC}}=\frac{\pi\left[\mathrm{d}_{\mathrm{BC}}^2-\left(\mathrm{d}_{\mathrm{BC}}-2 \mathrm{t}_{\mathrm{BC}}\right)^2\right]}{4} \\& \mathrm{~A}_{\mathrm{BC}}=2.209 \quad \begin{array}{c}\mathrm{P}_2=\sigma_{\mathrm{AB}} \mathrm{A}_{\mathrm{BC}}-\mathrm{P}_1 \\\mathrm{P}_2=1488 \mathrm{lbs} \quad \leftarrow \quad \end{array}\\\end{aligned}[/tex]
The required magnitude of load p2 is 1488 lbs.
Learn more about stress
https://brainly.com/question/12871096
#SPJ4
a refrigerator with a cop of 3.0 accepts heat at a rate of 10 kw. determine the rate of heat rejection. multiple choice question. 40 kw 3.33 kw
The correct answer is A refrigerator's COPmax is equal to Tlow/ (Thigh - Tlow). 270/(300 - 270) = COPmax = Tlow/(Thigh - Tlow) = 9.
The usable heating or cooling delivered to work (energy) needed ratio, also known as the coefficient of performance, or COP, of a heat pump, refrigerator, or air conditioning system. Higher efficiency, less energy (power) usage, and thus reduced operational costs are all related to higher COPs. What is the relationship between the C.O.P. of a heat pump and the efficiency of a heat engine? A) E equals (C.O.P.) B) E equals 1 / (C.O.P.) Considering that E = W / Q, the Carnot engine's equivalent is (T2 - T1) / T2. The temperature of the environment to which the freezer rejects heat is if the internal temperature is less than 200C.
To learn more about refrigerator's click the link below:
brainly.com/question/13002119
#SPJ4
An air outlet that supplies conditioned air is called a
A. ventilator.
B. diffuser.
C. louver.
D. return grille.
A diffuser is a type of air outlet that releases conditioned air.
What is meant by diffuser?A compressor or pump's diffuser is an essential component. Its goal is to raise pressure by slowing the flow as it leaves the impeller. The diffuser can be easily represented as a nonrotating channel with increasing flow area in the flow direction. Here is a brief explanation of what a diffuser does: A diffuser, which is typically an ultrasonic device driven by electricity and hooked into a wall socket, creates a fine, cold mist out of clean water and only the purest essential oils, which is then released into the air for us to breathe and feel through aroma. A diffuser is an apparatus that lowers a fluid's pressure by slowing it down. When a flow is subsonic or supersonic, the cross sectional area of a nozzle increases in the flow direction.To learn more about diffuser, refer to:
https://brainly.com/question/13752102
#SPJ1
Personal protective equipment (PPE) protects fire fighters in hazardous atmospheres. Which of the following is designed to protect fire fighters during most building fires?
US The turnout outfit, which consists of a protective coat and pants, is a requirement for firefighters, as well as other personal protective equipment (PPE) such a helmet, gloves, boots, and a self-contained breathing apparatus.
They should correctly wear an SCBA until it is considered safe to remove it in order to prevent exposures to hazardous chemicals through inhalation and skin absorption. Following an emergency reaction, a process known as secondary decontamination, firefighters are still at risk of inhaling dangerous substances. Protective clothing with a support function (meets NFPA 1993) air-purifying, canister-equipped, full-facepiece respirator. Safety boots and gloves that can withstand chemicals. Self-contained breathing apparatuses (SCBA) are essential for firefighters because they shield them from hazardous heat and poisonous smoke. The safety of the nation's firefighters quickly improved as a result of NIST research that contributed to strengthening industry standards for SCBA performance.
Learn more about gloves at:
https://brainly.com/question/1618277
#SPJ4
