The angular acceleration is 0.19 and the number of turns is 41.07 revolutions.
m = 87 kg be the mass of the grindstone,
r = 0.35 m be the radius of the grindstone,
I = mr²/2 be the grindstone's moment of inertia,
ω = 95 revolution/min = 95 2π/60s = 9.9 s-1 be initial angular velocity,
F = 15 N be the force pressing radially,
f = 0.2 be the coefficient of friction,
α (unknown) be the grindstones angular acceleration.
a)The tangential force slowing the grindstone is
fF
Its torque is
rfF
By Newton's Second Law
rfF = Iα
Therefore
α = rfF/I = 2rfF/mr² = 2fF/mr
Substituting actual numbers
α = 2×0.2×15/(87×0.35) = 0.19 s-2
Note that the above is the absolute value of the acceleration.
Depending on which direction is considered positive or negative,
the answer may need to be negated.
b)
Let
t be the time it takes the grindstone to come to rest,
θ be the total angle by which the grindstone will turn before coming to rest.We have the following identities, which follow from the definition of acceleration:
ω = αt
θ = αt²/2
From the first
t = ω/α
Plug into the second
θ = α(ω/α)²/2 = ω²/2α
Substitute actual numbers
θ = 9.9²/2×0.19 = 257.92
The above result is in radians.
Since the result is supposed to be given in revolutions,
we need to divide by the number of radians per revolutions:
257.92/2π = 41.07 revolutions
Therefore, the angular acceleration is 0.19 and the number of turns is 41.07 revolutions.
To learn more about torque refer here
https://brainly.com/question/20691242
#SPJ4
12. Calculate the potential difference that would be shown by the voltmeters shown in the circuits below. PLEASE ANSWER FAST
Answer: It is D
Explanation:
Divide the potential difference by the current to obtain the wire resistance. 20. Power A circuit has 12 of resistance and is connected to a 12-V battery.
Choose an example of a vertical motion with a negative velocity and a negative acceleration.
A body falling down towards earth, when upward direction is considered as positive direction got negative velocity and acceleration.
What is negative velocity and negative acceleration?Negative velocity = You move backwards. Negative acceleration = You slow down or you go faster in the backwards direction.You are standing on top of a building with certain height, H and you select height of building to be positive. If you throw a stone upward it's displacement is increasing and velocity is decreasing, both of them are positive and it is attracted towards earth by an acceleration so it is downward. SO it's value is negative.After reaching the maximum height the stone comes down and it's velocity increases in the downward direction, in this situation it is having negative velocity and and negative acceleration.An object which moves in the negative direction has a negative velocity. If the object is speeding up then its acceleration vector is directed in the same direction as its motion (in this case, a negative acceleration).Negative Velocity: An object has negative velocity if its position is changing in the negative direction as time increases. If examining a graph of displacement vs. time, the velocity is negative whenever the graph has negative slope.To learn more about negative acceleration refer to:
https://brainly.com/question/28737047
#SPJ1
what is - zqxs toivde :: apple flavoured and 8 are blackberry flavoured. She chooses a sweet at random and eats it. Then she chooses another sweet at random. Calculate the probability
The probabilities regarding the sweets are given as follows:
a) both sweets were apple flavour: 5/17.
b) both sweets were blackberry flavored: 28/153.
c) the first was apple and the second was blackberry: 40/153.
How to calculate the probabilities?A probability is calculated as the division of the number of desired outcomes by the number of total outcomes.
The sweets are chosen without replacement, hence the probability that both sweets were of apple flavor is calculated as follows:
p = 10/18 x 9/17 = 5/17.
The probability that both were blackberry flavored is calculated as follows:
p = 8/18 x 7/17 = 28/153.
The probability that the first was apple and the second was blackberry is of:
p = 10/18 x 8/17 = 40/153.
Missing InformationThe complete problem is given as follows:
Maria has a bag containing 18 fruit drop sweets. 10 are apple flavoured and 8 are blackberry flavoured. She chooses a sweet at random and eats it. Then she chooses another sweet at random. Calculate the probability that:
a) both sweets were apple flavour
b) both sweets were blackberry flavored
c) the first was apple and the second was blackberry
More can be learned about probabilities at https://brainly.com/question/14398287
#SPJ1
xl and xc can be combined to favor one particular frequency, the resonant frequency to which the lc circuit is tuned quizledt
It will give resonant frequency when [tex]X_{c}= X_{l}[/tex].
The frequency on which Inductive Reactance ([tex]X_{l}[/tex]) and Capacitive Reactance([tex]X_{c}[/tex]) becomes equals that is called Resonant Frequency. Resonance Effect is also called tuning effect.An LC circuit, also known as a tank circuit, a tuned circuit, or a resonant circuit, is an electric circuit that consists of a capacitor marked by the letter “C” and an inductor signified by the letter “L.”These circuits are used to generate signals at a specific frequency or to accept a signal from a more complex signal at a specific frequency.LC circuits are basic electronics components found in a wide range of electronic devices, particularly radio equipment, where they are employed in circuits such as tuners, filters, frequency mixers, and oscillators. The basic purpose of an LC circuit is to oscillate with the least amount of damping possible.To know more about circuits visit:
https://brainly.com/question/13092725
#SPJ4
lucy has three sources of sound that produce pure tones with wavelengths of 36 cm , 60 cm , and 92 cm . she also has an assortment of narrow tubes that are closed off at one end but open at the other. after experimenting, lucy notices that each tone will resonate with tubes of some lengths but not with others. for each wavelength, determine which tube lengths, if any, will resonate with sound of that wavelength. you are currently in a labeling module. turn off browse mode or quick nav, tab to items, space or enter to pick up, tab to move, space or enter to drop. wavelength of sound: 36 cm 60 cm 92 cm length of tube: answer bank. g
When α = 36 then L= 9cm ,27 cm,45 cm, 63cm ; when α = 60 then L= 15cm,45cm,75cm,105cm and when α = 92 then L= 23cm, 69cm, 115cm, 161cm. α is wavelength and L is the length of tubes.
What is wavelength?In physics, wavelength is the spatial period of a periodic wave and the distance over which the shape of the wave repeats.
L=( 2n+1)* α/4
when α = 36
L= (2n+1) * 36/4
= (2n+1) *9
when n= 0,1,2,3
L= 9cm ,27 cm,45 cm, 63cm
when α = 60
L= (2n+1) * 60/4
= (2n+1) * 15
when n= 0,1,2,3
L= 15cm,45cm,75cm,105cm
when α = 92
L= (2n+1) * 92/4
= (2n+1) * 23
when n= 0, 1, 2,3
L= 23cm, 69cm, 115cm, 161cm
To know more about wavelength, refer
https://brainly.com/question/10750459
#SPJ4
T/F which of the following best describes the energy transformations that occur when a flashlight that runs on batteries is turned on?
The chemical energy in the batteries is transformed into electrical power when the lighting is put on, which goes through the wires of the flashlight. Then, light and heat energy are created from this electrical energy.
What are two sorts of batteries?Batteries can be divided into two categories: main and secondary. Primary batteries cannot be refilled because they are "single use."Examples of primary batteries include dry phones and (most) alkaline batteries. The second type, which is rechargeable, is a secondary battery.
What exactly are batteries used for?An object that stores energy and releases it by transforming chemical energy into electrical energy is a battery. Typical batteries typically employ one or more fuel cells to chemically generate electricity.
To know more about batteries visit:
https://brainly.com/question/27252702
#SPJ4
A fighter jet is traveling at 515m/s directly away from a communication antenna that broadcasts at 406 MHz. What change in frequency does the fighter jet observe?
The fighter jet notices a change in frequency of 697 Hz.
rom Doppler's effect, f' = f(1 - u/c)
Here, c denotes the speed of light, u is the speed of the fighter jet, and f is the frequency of the antenna's broadcast.
so, f' = f(1 - u/c)
⇒f'/f = 1 - u/c
⇒(f - f')/f = u/c
⇒∆f = fu/c
so change in frequency, ∆f = fu/c
now f = 406 × 10⁶ Hz , u = 515 m/s and c = 3 × 10^8 m/s
so, ∆f = (406 × 10^6 × 515)/(3 × 10^8)
= 69696.67 × 10^-2
= 696.9667 Hz ≈ 697 Hz
Because of this, the fighter jet measured a 697 Hz change in frequency.
Learn more about frequency here:
https://brainly.com/question/14320803
#SPJ4
A fighter jet is traveling at 515m/s directly away from a communication antenna and that broadcasts at 406MHz.
The antenna is a device that is used for transmitting and receiving signals, which represent some information. antennas play a major role in the case of wireless communication system as the antenna effectively converts electromagnetic waves to electronic signals. antennas are the basic components of any electrical circuit, because it provides interconnecting links between transmitter and free space or free space and receiver.
The purpose of an antenna is to collect and convert electromagnetic waves to electronic signals. In communication antenna, the same antenna can be used for both transmission and reception.
to know more about antenna please visit.
https://brainly.com/question/13068622
#1234
It's nighttime, and you've dropped your goggles into a 3.2-m-deep swimming pool. If you hold a laser pointer 1.2 m above the edge of the pool, you can illuminate the goggles if the laser beam enters the water 1.8 m from the edge. Part A How far are the goggles from the edge of the pool? Express your answer to two significant figures and include the appropriate units. μΑ ? d= Value Unit
The distance of the goggle from the edge is 4.7 m
What is the Snell's law in physics?According to Snell's law, "For light of a particular colour and for the given pair of media, the ratio of the sine of the angle of incidence to the sine of the angle of refraction is a constant."Snell's Rule No. 1: The incident ray, the refracted ray, and the normal ray are all said to be on the same plane.To take the shortest path across a system, a ray shifts its direction as it passes from one refractive index medium to another. We refer to the light beam as being reflected each time a light ray crosses a barrier along its path and bounces back at an angle.Given data :
Laser angle with water surface is given by: Tan α = 1 / 1.8= 0.55
α = 26.56°
Laser angle with Normal = 90 – 26.56 = 63.44 °
Assuming a red laser, refractive index in water is 1.331.
Angle of refraction in water is given by:
Ref Ind = Sin i / Sin r
1.331 = Sin 63.44 / Sin r
Sin r = 0.8945 / 1.331 = 0.6721
Angle r = 42.22°
For the path in water:
Tan 42.22 = x / 3.2
x = 2.9m where x is the lateral displacement of the laser ince it hits the water
So the goggles are 1.8 + 2.9 = 4.7 m from edge of pool
Learn more about Snell's law refer to :
https://brainly.com/question/22266487
#SPJ4
How did John philoponus changed the science of forces
Answer:
philoponus originated one of physics great paradigm shifts. he said that after a projectile is launched, it keeps moving because of a force impressed into it by the thrower
Most of the energy you expend in cycling is dissipated by the drag force. If you double your speed, you increase the drag force by a factor of 4. This increases the power to cycle at this greater speed by what factor?
A. 2 B. 4 C. 8 D. 16
The power is increased by factor of 8 beacuse of the energy consumed in increasing the drag force.
Power is the rate of energy release. CCCs have high energy, but the TNT explosion has high power. It is defined as the energy used per second. It is the rate of energy release,
power = energy/time
The most common unit for power is the watt, named after James Watt who truly developed the science of the steam engine. It was the most powerful motor of its time, and the “high tech” of the 1700s. The watt is defined as one joule per second:
1 Watt = 1 W = 1 watt = 1 joule per second
1 kW = 1 kilowatt = 1000 joules per second
The value of TNT is that even though it has less energy per gram than chocolate chip cookies, it has greater power (since it can convert its limited energy to heat in a few millionths of a b). Of course, it can’t deliver this power for very long because it runs out of energy.
Power (P) = F v
Given,
where n is new
Vn = 2v
And Fn = 4F
So Pn = Fn*Vn
= 4F *2v =
= 8 (Fv) = 8 P
So, this increases the power by factor of 8.
To know more about power here
https://brainly.com/question/2248465
#SPJ4
The energy released from condensation in thunderstorms can be very large. Calculate the energy released into the atmosphere for a small storm of radius 1.8 km, assuming that 2.7 cm of rain is precipitated uniformly over this area. The heat Q required to change the phase of a sample of mass m is,
Q = mLv
Where, Lv is the latent heat of vaporization.
The heat that must be applied to a unit quantity of material in order to shift it from the liquid to the vapor phase without a change in temperature is known as the latent heat of vaporization or evaporation (Lv).
Describe the latent heat of vaporization using an example?
The energy needed to convert stuff from a liquid to a vapor without affecting temperature is known as the latent heat of vaporization. The change of liquid water particles into vapors occurs, for instance, when a water kettle is brought to a boil.
In plain English, what is latent heat of vaporization?
Latent heat of vaporization is the quantity of heat required to transform a unit mass of a liquid substance into a gaseous phase under conditions of constant temperature.
To know more about vapor visit;
https://brainly.com/question/14480429
#SPJ4
Which of the following telescopes is best suited for studying the hottest intergalactic gas(10 million K) in a cluster of galaxies?
Chandra X-ray Telescope
Chandra X-ray telescope is the one that is best suited for studying the hottest intergalactic gas in a cluster of galaxies.
Intergalactic gas is found in space that exists in-between the cluster of galaxies. This space is known as intergalactic space. An intergalactic gas is a very hot gas that emits X-rays. Temperature is very high where intergalactic gases exists in the universe. The intergalactic gases found in the universe are hydrogen and helium gases.
Chandra X-ray telescope is a successful mission of NASA that is programmed to detect the gases that emit X-rays. Therefore, intergalactic gases can easily be detected by this telescope. It is a powerful design that can also detect hot regions between the galaxies. This telescope was launched in the space by NASA, in the year 1999.
To know more about Chandra X-ray telescope, visit: https://brainly.com/question/29479139
#SPJ4
calculate the larmor precession frequency of a hydrogen nucleus in a 5.30 t magnetic field. assume that the shielding coefficient is zero. give your answer in hz using 5 significant digits relative to (x.xxxx).
The larmor precession frequency is [tex]2.256 * 10^8 Hz[/tex]
What is larmor precession frequency?
The rate at which the proton's magnetic moment precesses around the external magnetic field is known as the Larmor or precessional frequency in MRI. The magnetic field's strength, Bo, and the frequency of precession are correlated.
we know
f = γB (1 - σ)
where,
f = frequency
B = applied magnetic field
γ = gyromagnetic ratio
σ = shielding coefficient
For hydrogen nucleus (1H) = 42.58MHz/T
B = 5.30T
Given σ = 0 (assume)
Substituting the values in equation:
f = 42.58 * 5.30(1 - 0)
f = 42.58 * 5.30 * 1
f = 225.674MHz
f = [tex]2.256 * 10^8 Hz[/tex]
The larmor precession frequency is [tex]2.256 * 10^8 Hz[/tex]
To know more about precession frequency, check out:
https://brainly.com/question/14656079
#SPJ4
The filament of a 75-W light bulb is at a temperature of 3300 K. Assuming the filament has an emissivity e = 0.9, find its surface area. (Use s = 5.6696 10-8 W/m2 · K4 for the Stefan-Boltzmann constant.)
Surface area is 1.10 × 10^-5 .
Stefan-Boltzmann law, statement that the total radiant heat power emitted from a surface is proportional to the fourth power of its absolute temperature.All bodies radiate energy W depending on temperature T, according to the Stefan-Boltzmann law W = ε σT4 where emissivity ε is equal to 1 for black bodies and less than 1 for grey bodies, σ being the Stefan constant.
From Stefan's law, the power radiated by an object at absolute
temperature T and surface area A is POAT, where a=5.6696 × 10
W/m²K and e is the emissivity. Thus, the surface area of the filament
must be
A =75 W / (5.6696x10 )(1.0 )(3300) = 1.10 * 10^-5
To know more about Stefan-Boltzmann Law :-
brainly.com/question/14266924
#SPJ4
vexplain the differences between refraction diffraction, and interference. are there any situations where more than one of those are happening at the same time? in which of these situations does the speed of a wave change? what about the wavelength? and the frequency? provide as detailed a description as possible to show that you have mastered the differences between these three processes
Refraction is when light travels from one medium to another
This is studied by considering the light as ray.
Here as the ray travels from one medium to another, its speed changes.
However, the frequency of the waves which depend on the source will not change in the other medium as well. So frequency does not change in refraction. But wavelength changes when light undergoes refraction.
Interference and Diffraction are studied treating light as wave. And both of these are basically superposition of waves
In interference, light from two coherent sources interfere with each other and the resulting wave pattern is the subject of interference.
While in diffraction, secondary wavelets emerging from the original wave's different parts is considered. The supersposition of these secondary wavelets is basically diffraction.
In both of these interference and diffraction, speed, wavelength and frequency all remains same as the speed and therefore wavelength depends only on the medium
Reflection involves the change in direction of a wave as it bounces off a barrier. Wave refraction involves the change in direction of a wave as it passes from one medium to another. Diffraction involves the change of direction of a wave as it passes around an opening or barrier in its path.
Reflection is the process of reflecting light when it hits an in-plane medium. Refraction is the process of changing the path and bending light as it passes through a material. Hence, this is the main difference between reflection and refraction.
Learn more about reflection refraction diffraction here :
https://brainly.com/question/19029438
#SPJ4
A runner can jog at 5m\s how many laps or a 400m track could she complete in 4 minutrs?
Answer:
3 laps
Explanation:
1 minute = 60 seconds.
4 minutes * 60 seconds/ 1 minute = ==> use seconds-minutes conversion
factor to solve for the number of
seconds in 4 minutes
4 * 60 seconds/1 = ==> cancel the minutes unit
4 * 60 seconds = 240 seconds in 4 minutes
Now solve for the number of meters completed in 240 seconds by using the meters-seconds conversion
240 seconds * 5 meters/1 second=
240 * 5 meters/1= ==> cancel the seconds unit
240*5 meters = 1200 meters
Now solve for the number of laps equivalent to 1200 meters by using the laps-meters conversion
1200 meters * 1 lap/400 meters =
1200 * 1 lap/400 = ==> cancel the meters unit
1200 laps/400 =
1200/400 laps = 3 laps
A person is lying on a diving board 2.50 above the surface of the water in a swimming pool. The person looks at a penny that is on the bottom of the pool directly below her. The penny appears to the person to be a distance of 7.00 from her.
Part A
What is the depth of the water at this point?
Express your answer with the appropriate units.
S =
The depth of the water at this point by using water refractive index 1.33 is 5.985m.
What is refractive index (index of refraction)?In optics, the refractive index of an optical medium is a dimensionless number that gives the indication of the light bending ability of that medium. The refractive index determines how much the path of light is bent, or refracted, when entering a material.
Distance that is below water (as seen by diver)
= 7 - 2.5 = 4.5m
apparent depth would be 4.5m
using the formula
apparent depth = real depth / refractive index
real depth = 4.5 * 1.33= 5.985m
Therefore, the real depth of the water at this point is 5.985m
Learn more about refractive index (index of refraction) https://brainly.com/question/23750645
#SPJ4
Which of these can be dissipated?
Choose all that are correct.
A: chemical b: thermal c:light d: sound e: elastic
All of the following can be dissipated
thermal energylightsoundelastic energyChemical energy cannot be dissipated, but it can be converted into other forms of energy through chemical reactions.
Answer:
b: thermal c:light d: sound
Explanation:
whatever can be converted into heat
find the tension in each cord in the following figure, if the weight of the suspended object is 100 n. (make a free body diagram).
T a = 573.77 N and T b = 702.7 N are the tensions in the system's cords A and B, respectively.
What is meant by tension?A rope, string, or cable that is stretched under an applied force develops a force known as a tension force in physics. In the opposite direction of the force imparted to the rope or cable, tension is exerted along its whole length. Other names for tension include stress, tensity, and tautness.
The force transferred through a rope, string, or wire when pushed by forces acting from opposite sides is referred to as tension. The tension force is applied along the entire length of the wire and exerts an equal amount of strain on the bodies at each end.
Something can stretch under tension. Something gets squeezed together through compression. Only materials having the ability to resist forces are useful. Similar to how water moves through a pipe, force moves through a material.
We have to solve the system of equations:
- T a × cos 60° + T b × sin 45° - 210 N = 0
- T a × sin 60° + Tb cos 45° = 0
------------------------------------------------------
- 1/2 T a + √2 / 2 T b = 210 N
- √3 / 2 T a + √ 2 / 2 T b = 0 / * ( - 1 )
---------------------------------------------------
- 1/2 T a + √2 / 2 T b = 210 N
√ 3 / 2 T a - √2 / 2 T b = 0
----------------------------------------
T a ( √3 / 2 - 1 / 2 ) = 210 N
0.366 T a = 210 N
T a = 210 N : 0.366
1 ) T a = 573.77 N
Ta × √3 / 2 = T b × √ 2 / 2
T b = ( 573.77 × 1.732 ) : 1.4142
2 ) T b = 702.7 N
The complete question is:
Find the tension in each cord in the figure if the weight of the suspended object is w = 210N
A) Find the tension in the cord A for system (b).
B) Find the tension in the cord B for system (b).
To learn more about tension refer to:
https://brainly.com/question/24994188
#SPJ4
consider medical x rays that are taken with electromagnetic waves having a wavelength around 0.14 nm in air. What is the frequency of such waves? Express your answer with the appropriate units
Frequency of such waves is 2.14 x 10¹⁸ Hz.
Given
wavelength λ = 0.14 *10^⁻⁹ m
ν =c/λ = (3×10⁸)/(0.14 x 10⁻⁹) =2.14 x 10¹⁸ Hz
The relation between frequency, velocity and wavelength of a wave is given by,
ν=v/λ
Where ν is the frequency,
v is the speed of the wave and
λ is the wavelength of the wave.
The angular frequency of the wave is given by,
ω=2π
ν=2πT
Electricity can be static, like the energy that can make your hair stand on end. Magnetism can also be static, as it is in a refrigerator magnet. A changing magnetic field will induce a changing electric field and vice-versa—the two are linked. These changing fields form electromagnetic waves. Electromagnetic waves differ from mechanical waves in that they do not require a medium to propagate. This means that electromagnetic waves can travel not only through air and solid materials, but also through the vacuum of space.
To know more about wavelength :-
brainly.com/question/15077874
#SPJ4
How did great britian changed the science of forces
Shortage of wood and the abundance of convenient coal deposits and Commercial-minded aristocracy of the great Britain changed the science of forces.
What is the Spread of the Industrial Revolution?Britain attempted to keep its manufacturing processes a secret, but people came to learn about them and brought the knowledge home with them.
Sometimes they used rowboats to smuggle the machines to nearby nations. Belgium, Switzerland, France, and the states that would become Germany were the first nations after Britain to build factories and railroads. Industrialization proven to require the establishment of a national train network. Switzerland's railroads were built in 1847, Belgium's in 1834, France's in 1842, and Germany's in the 1850s.
Learn more about Industrial Revolution here:
https://brainly.com/question/855594
#SPJ1
what happens to the atomic number of an atom when the number of neutrons in the nucleus of that atom increases? (2 points) it decreases it increases it doubles it remains the same
The atomic number of an atom when the number of neutrons in the nucleus of that atom increases, it remains the same.
What is meant by atomic number?The charge number of an atomic nucleus is the chemical element's atomic number, also known as nuclear charge number (symbol Z). This is equivalent to the proton number (np), or the number of protons present in the nucleus of each atom of that element, for conventional nuclei. Ordinary chemical elements can be uniquely identified using their atomic number. The atomic number and the number of electrons are both equal in a regular, uncharged atom.Isotopes are atoms with the same atomic number but distinct neutron numbers, and thus, varying mass numbers. The standard atomic weight of an element is determined by the average isotopic mass of an isotopic mixture for that element in a particular environment on Earth. A little over three-quarters of naturally occurring elements exist as a mixture of isotopes (see monoisotopic elements).Learn more about atomic number refer to :
https://brainly.com/question/1805828
#SPJ1
What is the magnitude B of the magnetic field at the location of the charge due to the current-carrying wire? Express your answer in teslas. View Available Hint(s) V AED + ? BB = V\rm{T}) Learning Goal:
To practice Problem-Solving Strategy 24.2 Magnetic force problems A long straight horizontal wire carries a current I = 1.20 A to the left. A positive 1.00 C charge moves to the right at a distance 5.00 m above the wire at constant speed v = 5000 m/s. (Figure 1) What are the magnitude and the direction of the magnetic force on the charge?
The magnitude of the magnetic field on the charge: 4.8 × 10⁻⁸ T
What is magnetic field?The magnetic field is a zone surrounding a magnetic substance or a moving electric charge where magnetism acts. Moving electric charges and magnetic dipoles combine to form a magnetic field, which acts as a force field on other adjacent moving charges and magnetic dipoles.
B and H are used to denote the magnetic field. The SI units for B and H are Newtons per meter per ampere or Teslas, respectively.
Here, by right hand rule, the magnetic field around the wire which will be into the location.
Thus, the magnitude of the magnetic field,
B = μ(0)I/2πr
or, B = [(4π × 10 ⁻⁷) × (1.20)] ÷ [2π(5.00)]
or, B = 4.8 × 10⁻⁸ T
To know more about magnetic field refer to:
https://brainly.com/question/7802337
#SPJ1
if the position of a particle on the x-axis at time t is −5t2, then the average velocity of the particle for 0 ≤ t ≤ 3 is
Answer:
Below
Explanation:
Position at t = 0 = -5 (0)^2 = 0
Position at t = 3s -5 (3)^2 = -45
average velocity = (-45- 0 ) / 3s = -15 units/s
The average velocity of the particle for 0 ≤ t ≤ 3 is - 15 unit.
What is velocity?The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
Given that: the position of a particle on the x-axis at time t is = -5t².
Hence, at t = 0s; the position of the particle = 0 unit.
at t = 3s; the position of the particle = -5× 3²unit = - 45 unit.
Then, the average velocity of the particle
= (final position - initial position) time interval
= (- 45 - 0)/3 unit
= - 15 unit.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ2
substance a has a high melting point, is soluble in water, is a conductor of electricity when dissolved in water but not as a solid, and has a hard surface. stsate the type of bonding you would expect to find in this substance
The type of bonding in the substance is an ionic bond, as the substance is a non-conductor of electricity in the solid state but is a conductor when melted or in a liquid state.
When the complete transfer of some electrons takes place from one atom to another atom, the kind of bond is ionic bond. The atom which loses one or more electrons becomes a cation. It is a positively charged ion. The atom which gains one or more electrons becomes an anion. It is a negatively charged ion.
Ionic bonding is very strong. When the substance is in a solid state, bond force does not leave free electrons to conduct electricity. When dissolved in water, the bond breaks, and some electrons are freed to conduct electricity.
Water is a polar covalent compound that can help in breaking of ionic bonds.
To know more about ionic bond here
brainly.com/question/11527546
#SPJ4
students attach a force probe in the middle of string a to measure ta and then use a different force probe to provide the applied force f to the box of mass m1. with the box of mass m3 held in place by one student, a second student pulls to the left on the force probe that provides the applied force f. as the second student pulls with a steady force, and with the boxes remaining at rest, the following pairs of readings from the two force probes are recorded at different times. Time F(N) TA (N) ti 10.6 11 10 10.4 10.2 10.8 10 11 t5 10.6 11 Based on the measurements above, how do the magnitudes of the two force quantities compare? The two quantities exactly agree numerically. The two quantities agree within experimental uncertainty but do not exactly agree numerically. The two quantities disagree by an amount that is larger than the experimental uncertainty. The two quantities cannot be compared because the two force probes have different levels of precision.
The magnitudes of the two force quantities after comparing the two quantities agree within experimental uncertainty but do not agree numerically.
What is applied force?One of the most prevalent forms of force is applied force, which is the force we exert on objects with our hands, legs, or any other item. As an illustration, push a chair with some force to move it in a certain direction.
According to Newton's second equation of motion, an object's force is equal to its mass times its acceleration, or F = m × a.
Use Newtons for force, kilograms for mass, and meters per second squared for acceleration when applying this formula.
Given that, time F(N) TA(N)
t₁ 10.6 11
t₂ 10.4 10
t₃ 10.2 10
t₄ 10.8 11
t₅ 10.6 11
Thus, The mean value of F is: 10.52 N
The mean value of TA is: 10.6 N
So, the two quantities agree within experimental uncertainty but do not agree numerically.
Thus, the two quantities cannot be compared because the two force probes have different levels of precision.
To know more about applied force refer to:
https://brainly.com/question/2733221
#SPJ1
an electron in a cathode-ray tube is accelerated through a potential difference of 10 kv, then passes through the d
The field strength that will deflect the electrons is 2.93*10^-3 T or 2.93mT.
Calculation:
from figure
sin(o) =d/r
r =d/sin(o) =1.6/sin8 =11.5 cm
from conservation of energy
qV =(1/2)mv^2
[tex](1.6*10^-19)(10*10^3)=(1/2)(9.11*10^-31)*v^2[/tex]
[tex]v=5.93*10^7 m/s[/tex]
and
r = mv/qB
= [tex]B =mv/qr =(9.11*10^-31)*(5.93*10^7)/(1.6*10^-19)(11.5*10^-2)[/tex]
B = 2.93*10^-3 T or 2.93mT.
An electron is a subatomic particle with a negative elementary charge. Electrons belong to the first generation of the leptonic particle family and are generally considered elementary particles because they have no known composition or substructure. In the standard model of particle physics.
Electrons are the smallest particles that make up an atom and have a negative charge. In neutral atoms, the number of protons and electrons is the same, and are considered elementary or elementary particles. electrons belong to a group of elementary particles called leptons.
Learn more about An electron here:- https://brainly.com/question/860094
#SPJ4
This painting represents the Milky Way Galaxy as it would appear edge-on from a distance. Label the indicated features; be sure to pay attention to where the leader lines are pointir Drag the labels to the appropriate blanks on the diagram. You may use a label more than once. View Available Hint(s) Reset Help bulge globulan clusters halo disk
The indicated features from top to bottom:
spiral armbulgediskIt is called a spiral galaxy because it looks like a spinning windmill when viewed from above or below. The Sun is in one of the spiral arms about 25,000 light-years away from the center of the galaxy.
Our solar system is in a galaxy called the Milky Way which is tightly packed with 100 to 400 billion other stars many of which have planets of their own. The Milky Way got its name because it looks like a stream of spilled milk across the sky. An elliptical galaxy is a type of galaxy with an almost featureless image that is nearly elliptical and smooth.
Learn more about The Milky Way Galaxy here:- https://brainly.com/question/13956361
#SPJ4
An 7.80-mF capacitor is connected across an AC source with an rms voltage of 71.0 V oscillating with a frequency of 30.0 Hz. What are the following for this circult? (a) capacitive reactance (b) rms current (c) maximum current
a)The capacitive reactance is 680 ohms.
[tex]X_{c}=1/2\pi fC[/tex]
[tex]X_{c}=1/2\pi *30*7.8*10^{-6}[/tex]
[tex]X_{c}=680\\[/tex]
b)The rms current is 0.10 amperes.
[tex]I_{rms}=V_{rms}/X_{c}[/tex]
[tex]I_{rms}=71/680[/tex]
[tex]I_{rms}=0.10A[/tex]
c)The maximum current in the circuit is 0.147 amperes.
[tex]I_{max}=\sqrt{2} *I_{rms}[/tex]
[tex]I_{max}=\sqrt{2} *0.10[/tex]
[tex]I_{max}=0.147A[/tex]
What is capacitive reactance?
The measure of the opposition to alternating current by the capacitor is called Capacitive Reactance. The unit of Capacitive Reactance is Ohms-like resistance. The symbol of Capacitive Reactance is XC
What is the capacitive reactance formula?
Xc = 1/2πfc
XC is the capacitive reactance, π is a constant with the value of 3.14, f is the frequency, and c is the capacitance.
To know more about capacitive reactance:
https://brainly.com/question/14579743
#SPJ1
Consider a fish swimming forward in the ocean. Which of the following describes the basic action/reaction forces between the fish and the water? Explain the answer.
a. The forces point in the same direction because forces in liquid media behave differently than forces in air.
b. The force of the fish points forward while the force of the water points back.
c. The force of the fish points back while the force of the water points forward.
d. The force of the fish points upward while the force of the water pulls downward.
Answer:
turn off the force
Explanation:
