The total work done by the compressor motor in the refrigerator is 8 Joules.
You placed your lunch leftovers in the refrigerator, and it needs to remove 4 joules (J) of thermal energy from the lunch to cool it to the inside temperature.
Simultaneously, the refrigerator produces 4 J of thermal energy that it expels into the kitchen. To determine the total work done by the compressor motor in the refrigerator, follow these steps:
Step 1: Understand the energy conservation principle.
The refrigerator works based on the principle of energy conservation. The energy that is removed from your lunch is not destroyed but transferred to another form, which is the thermal energy expelled into the kitchen.
Step 2: Calculate the total energy.
Since the refrigerator removes 4 J of thermal energy from your lunch and generates 4 J of thermal energy expelled into the kitchen, the total energy involved is the sum of these two values.
Total Energy = Energy removed from lunch + Energy expelled into the kitchen
Total Energy = 4 J + 4 J
Total Energy = 8 J
Step 3: Determine the work done by the compressor motor.
The work done by the compressor motor is equal to the total energy involved in the process, as there are no thermal losses due to friction in the motor.
Total Work Done = Total Energy
Total Work Done = 8 J
So, the total work done by the compressor motor in the refrigerator is 8 Joules.
To know more about work done refer here
brainly.com/question/3902440#
#SPJ11
with what constant velocity does an object of mass 5kg move if it’s momentum is 10kg•m/s?
The object would be moving at a constant velocity of 2 m/s.
A vector number called velocity is used to explain how quickly an object's position changes in relation to time. It is stated in terms of metres per second (m/s) or kilometers per hour (km/h), and is defined as the displacement (change in position) of an object divided by the time interval during which the displacement occurred.
The momentum (p) of an object is defined as the product of its mass (m) and velocity (v):
p = mv
We can rearrange this equation to solve for velocity:
v = p / m
Substituting the given values, we get:
v = 10 kg.m/s / 5 kg
Simplifying the expression, we get:
v = 2 m/s
Therefore, the object is moving at a constant velocity of 2 m/s.
To know more about velocity
https://brainly.com/question/27914280
#SPJ1
whether the speed of the center of mass of the two-block system is either constant or not constant during the time interval from t2 to t4, and explain why.
To determine whether the speed of the center of mass of the two-block system is either constant or not constant during the time interval from t2 to t4,
we need to consider the forces acting on the blocks and their motion during this period.
Step 1: Identify the forces acting on the blocks during the time interval from t2 to t4.
Step 2: Determine if there is a net external force acting on the system during this time interval.
Step 3: Analyze the motion of the center of mass of the system based on the net external force.
If there is no net external force acting on the two-block system during the time interval from t2 to t4, the speed of the center of mass will remain constant, as per the conservation of linear momentum.
This is because, in the absence of an external force, the internal forces acting between the blocks will cancel each other out, resulting in no change in the overall momentum of the system.
However, if there is a net external force acting on the system during this time interval, the speed of the center of mass will not be constant.
This is because the external force will cause the system's momentum to change, resulting in a change in the speed of the center of mass.
In conclusion, the speed of the center of mass of the two-block system is either constant or not constant during the time interval from t2 to t4, depending on the presence or absence of a net external force acting on the system.
If there is no net external force, the speed remains constant; otherwise, it will not be constant.
To know more about two-block system refer here
brainly.com/question/29692215#
#SPJ11
find the force between 2 wires 0.50m long, if there is 0.15m between them and the first wire has 2.0a, and the second wire carries 5.0a.
Answer: 6.67 × [tex]10^{-6}[/tex] N
Explanation:
if a projectile is fired with an initial velocity of 225 m/s at an angle of 40 degrees from the horizontal, what distance (range) will the projectile travel before landing?
The projectile's range, when fired with an initial velocity of 225 m/s at a 40-degree angle, is approximately 1019.43 meters.
To find the range (R) of a projectile, we can use the following formula: R = (v² * sin(2 * θ)) / g, where v is the initial velocity, θ is the launch angle, and g is the acceleration due to gravity (approximately 9.81 m/s²).
Step-by-step explanation:
1. Convert the angle from degrees to radians: 40 degrees * (π / 180) ≈ 0.698 radians.
2. Calculate sin(2 * θ): sin(2 * 0.698) ≈ 0.839.
3. Square the initial velocity: 225² = 50625.
4. Multiply the squared initial velocity by the sine value: 50625 * 0.839 ≈ 42502.54.
5. Divide the result by the acceleration due to gravity: 42502.54 / 9.81 ≈ 1019.43 meters.
The projectile will travel approximately 1019.43 meters before landing.
Learn more about projectile here:
https://brainly.com/question/31126282
#SPJ11
For the CP-1 flying at sea level (density = 0. 002377 slug/ft^3) with V. = 136. 4 mi/h (200ft/s), compute a. Lift coefficient b. Drag coefficient c. (L/D) ratio d. Find Thrust Required, TR 3. Estimate the maximum velocity for CP-1 at sea level. 4. Estimate the maximum R/C for CP-1 at sea level
The maximum R/C for CP-1 at sea level would be 184np.
Given data of CP -1
wing spam (b) = 35.8 ft. = 10.912m
wing area (s) = 174ft² = 16.1651m²
Gross weight W = 2950lb = 13127.5 N
Sfc = 0.45 lb /hp-hr
Engine = piston engine of 230hp
Cdo = 0.025
e = 0.8 , η propeller = 0.8
ρses = 0.002377 slug/ft³
V(∞) = 136.4 m/hr
As a/p is cruising L= W , T=D
L=W = 1/2 ρ(∞) V(∞)²SCl = W
Cl= 2W/ρSV² = 0.387
C(D) = C(do) + ηCl²
k= 1/2πARc
C(D) = 0.025 +(1/π ×7.37×0.8)×0.397²
C(D) = 0.0319
L/D = C(l) = 0.357/0.0319 = 11.2
(4) L = W
T(R)= [W/(L/D)] = 11721.1N = 263.5lb
Max. velocity at sea level
For a propellor engine , max velocity, is determined by the intersecting point of Pav and Pr curve.
Pav = bnP ×ηp = 230×0.8 = 184np
Thus, the the maximum R/C for CP-1 at sea level is 184np.
To know more about sea level
https://brainly.com/question/22684515
#SPJ4
To know more about
#SPJ4
star a has absolute magnitude 1, while star b has absolute magnitude 0. based only on this information, what can be said about these two stars?
Absolute magnitude is a measure of the intrinsic brightness of a celestial object, such as a star, and is defined as the apparent magnitude the object would have if it were at a distance of 10 parsecs (32.6 light-years) from Earth. The lower the absolute magnitude, the brighter the object is intrinsically.
Given that star b has an absolute magnitude of 0 and star a has an absolute magnitude of 1, we can infer that star b is intrinsically brighter than star a. However, we cannot make any conclusions about other properties of the stars, such as their distance from Earth or their surface temperature. To further understand the properties of these stars, we would need additional information, such as their spectral type, luminosity class, or distance from Earth.
Learn more about Absolute magnitude
https://brainly.com/question/31022175
#SPJ4
a laser beam is normally incident on a single slit with width 0.650 mm. a diffraction pattern forms on a screen a distance 1.20 m beyond the slit. the distance between the positions of zero intensity on both sides of the central maximum is 2.28 mm. calculate the wavelength of the light (in nm).
We can use the formula for the distance between the positions of zero intensity on both sides of the central maximum in a single-slit diffraction pattern.The wavelength of the light is 546 nm.
To solve this proble, we can use the formula for the distance between the positions of zero intensity on both sides of the central maximum in a single-slit diffraction pattern: sin(θ) = λ/d
In this case, we are given the width of the slit (d = 0.650 mm), the distance between the slit and the screen (L = 1.20 m), and the distance between the positions of zero intensity on both sides of the central maximum (2θ = 2.28 mm).
We can use trigonometry to find the value of sin(θ): sin(θ) = (2θ)/(L) Substituting in the given values, we find: sin(θ) = (2 × 2.28 mm)/(1.20 m) = 0.0038
Finally, we can use the formula we derived earlier to find the wavelength of the light: λ = (0.650 mm) × sin(θ) = 546 nm.
To know more about diffraction, refer here:
https://brainly.com/question/12290582#
#SPJ11
a 4.70 kg block hangs from a spring with spring constant 1980 n/m . the block is pulled down 6.20 cm from the equilibrium position and given an initial velocity of 1.80 m/s back toward equilibrium.a) what is the frequency of the motion (units: Hz)b) what is the amplitude (units: m)c) what is the total mechanical energy of the motion (units: J)
A. The frequency of the motion is 0.0078 Hz. B. the amplitude of the motion is 7.90 m. and C. the total mechanical energy of the motion is 14.56 J.
What is frequency?Frequency is a measurement of how often something occurs over a period of time. It is typically measured in hertz (Hz) or cycles per second.
a) The frequency of the motion can be calculated using the equation:
frequency = 1 / (2π * √(k/m))
where k is the spring constant, and m is the mass of the block.
Substituting in the given values, we get:
frequency = 1 / (2π * √(1980 N/m / 4.70 kg))
= 1 / (2π * √(420.42 N/kg))
= 1 / (2π * 20.52 N/kg)
= 1 / (127.71 N/kg)
= 0.0078 Hz
Therefore, the frequency of the motion is 0.0078 Hz.
b) The amplitude of the motion can be calculated using the equation:
amplitude = (2π * √(k/m)) * x
where x is the displacement from equilibrium, k is the spring constant, and m is the mass of the block.
Substituting in the given values, we get:
amplitude = (2π * √(1980 N/m / 4.70 kg)) * 0.062 m
= (2π * 20.52 N/kg) * 0.062 m
= 127.71 N/kg * 0.062 m
= 7.90 m
Therefore, the amplitude of the motion is 7.90 m.
c) The total mechanical energy of the motion can be calculated using the equation:
E = ½ mv² + ½ kx²
where m is the mass of the block, v is the initial velocity, k is the spring constant, and x is the displacement from equilibrium.
Substituting in the given values, we get:
E = ½ (4.70 kg) (1.80 m/s)² + ½ (1980 N/m) (0.062 m)²
= 8.39 J + 6.17 J
= 14.56 J
Therefore, the total mechanical energy of the motion is 14.56 J.
To learn more about frequency
https://brainly.com/question/30466268
#SPJ4
a small statuette sits at a distance of 1.6 cm from a converging lens with a focal length of 23.9 cm. determine the magnification of the object's image.
To determine the magnification of the object's image, we can use the formula: magnification = image height / object height
First, we need to find the image height. We can use the thin lens equation:
1/f = 1/d_o + 1/d_i
where f is the focal length, d_o is the object distance, and d_i is the image distance.
We know that f = 23.9 cm and d_o = -1.6 cm (since the object is in front of the lens and we take the distance as negative). We can solve for d_i:
1/23.9 = 1/-1.6 + 1/d_i
d_i = 2.2 cm
Now we can find the image height using similar triangles:
image height / object height = d_i / d_o
image height / 1 = 2.2 / -1.6
image height = -1.375 cm
(Note that the negative sign indicates that the image is inverted.)
Finally, we can calculate the magnification:
magnification = image height / object height = -1.375 / 1 = -1.375
So the magnification of the object's image is -1.375.
To determine the magnification of the object's image when a small statuette sits at a distance of 1.6 cm from a converging lens with a focal length of 23.9 cm, you can follow these steps:
Step 1: Use the lens formula:
1/f = 1/do + 1/di
where f is the focal length (23.9 cm), do is the object distance (1.6 cm), and di is the image distance.
Step 2: Solve for the image distance (di):
1/23.9 = 1/1.6 + 1/di
Step 3: Rearrange the equation and solve for di:
1/di = 1/23.9 - 1/1.6
di = 1 / (1/23.9 - 1/1.6) ≈ 1.64 cm
Step 4: Calculate the magnification using the formula:
M = -di/do
M = -1.64/1.6 ≈ -1.025
The magnification of the object's image is approximately -1.025, which means the image is slightly larger than the object and inverted.
To know more about magnification visit:
https://brainly.com/question/31088803
#SPJ11
which force would keep the sled moving toward the left and speeding up at a steady rate (constant acceleration)?
The force that would keep the sled moving toward the left and speeding up at a steady rate (constant acceleration) would be an unbalanced force. This unbalanced force would be directed towards the left, and would need to be greater than any opposing forces acting on the sled, such as friction or air resistance.
This force could be provided by a motor or an inclined surface, for example.
The force that would keep the sled moving toward the left and speeding up at a steady rate (constant acceleration) is an unbalanced force, specifically a net force acting in the leftward direction. This force could be caused by an external push or pull, or even friction if it is acting in the direction of motion. The constant acceleration occurs because this unbalanced force continuously acts on the sled, causing its velocity to increase in the leftward direction at a steady rate.
To know more about force visit:
https://brainly.com/question/13191643
#SPJ11
54) A 5.3 L flask of ideal neon gas (which is monatomic) is at a pressure of 6.0 atm and a temperature of The atomic mass of neon is 20.2 g/mol. What is the mass of the neon gas in the flask. (R = 8.31 J/mol ∙ K, 1 atm = 101 kPa, NA = 6.022 × 1023 molecules/mol)
A) 2.7 × 10-2
B) 1.6 × 10-2
C) 1.3 × 101
D) 2.7 × 101
E) 2.7 × 103
A 5.3 L flask of ideal neon gas (which is monatomic) is at a pressure of 6.0 atm. The mass of neon gas in the flask will be 2.7 × 10¹.
Option D is correct.
Volume of the sample of the ideal gas,V =5.3 L
Pressure,P =6 atm
Temperature,T =290 K
Gas constant, R = 0.0831 L-atm/K-mol.
Atomic mass of the neon ,M =20.2 g/mol.
PV =m(R/M )T
m= PVM/RT
m =(6) ×(5.3) ×(20.2)/(0.0831) × (290)
=26.655 g
Why is the gas law ideal?A hypothetical gas made up of molecules that adhere to a few rules is referred to as the ideal gas. The molecules of ideal gas do not attract or repel one another. An elastic collision with the container's walls or an elastic collision with the ideal gas molecules would be the only interaction between them.
The best gas regulation (PV = nRT) relates the perceptible properties of ideal gases. An ideal gas is a gas wherein the particles (a) don't draw in or repulse each other and (b) occupy no room (have no volume).
Learn more about ideal gas law:
brainly.com/question/28206895
#SPJ4
two loudspeakers, a and b, are separated by a distance of 2.0 m. the speakers emit sound waves at a frequency of 680 hz that are exactly out of phase. the speed of sound is 343 m/s. how far from speaker a along the x axis will a point of constructive interference occur?
The point of constructive interference will occur at a distance of 1.496 m from speaker A along the x-axis.
What is constructive?Constructive can refer to something that is helpful and intended to produce positive results. It is often used to describe actions, ideas, or statements that are intended to be beneficial or create positive change. Constructive can also refer to something that is designed to build, improve, or create something, or to generally make something better.
The point of constructive interference will occur when the difference in the distance the sound waves have traveled from each speaker is equal to an integer multiple of the wavelength.
The wavelength of a sound wave with a frequency of 680 Hz is given by the formula:
λ = v/f
where λ is the wavelength, v is the speed of sound and f is the frequency.
Substituting the values for v and f, we get:
λ = 343 m/s / 680 Hz = 0.504 m.
Therefore, the difference in the distance the sound waves have traveled from each speaker must be a multiple of 0.504 m for there to be constructive interference.
The distance between the two speakers is 2 m, so the distance from speaker A along the x-axis to the point of constructive interference will be:
2 m - nλ
where n is an integer.
Therefore, the point of constructive interference will occur at a distance of 1.496 m from speaker A along the x-axis.
To learn more about constructive
https://brainly.com/question/2166481
#SPJ4
The on-axis magnetic field strength 10 cm from a small bar magnet is 5 μT.
Part A
What is the bar magnet's magnetic dipole moment?
Express your answer in ampere meters squared.
Part B
What is the on-axis field strength 15 cmcm from the magnet?
The on-axis magnetic field strength 10 cm from a small bar magnet is 5 μT.
Part A The magnetic dipole moment of the bar magnet is 1.2566A [tex]m^{2}[/tex].
Part B The on-axis field strength 15 cm from the magnet is 1.482 μT.
Part A
The magnetic field strength at a distance r from a magnetic dipole moment m is given by
B = μ0/4π * (2m/ [tex]r^{3}[/tex] )
Where μ0 is the permeability of free space.
We can rearrange this equation to solve for m
m = B * 4π * [tex]r^{3}[/tex] / (2 * μ0)
Substituting the given values, we get
m = (5 μT) * 4π * [tex](0.1m)^{3}[/tex] / (2 * π * [tex]10^{-7}[/tex] T m/A)
m = 1.2566 A [tex]m^{2}[/tex]
Therefore, the magnetic dipole moment of the bar magnet is 1.2566A [tex]m^{2}[/tex].
Part B
Using the same equation as in Part A, but with a distance of 15 cm, we get
B = μ0/4π * (2m/ [tex]r^{3}[/tex] )
B = (4π * [tex]10^{-7}[/tex] T m/A )/ (4π) * (2 * 1.2566 A [tex]m^{2}[/tex])/[tex](0.15m)^{3}[/tex]
B = 1.482 μT
Therefore, the on-axis field strength 15 cm from the magnet is 1.482 μT.
To know more about magnetic field strength here
https://brainly.com/question/31386398
#SPJ4
photoelectrons from a metal with a work function of 2.54 ev are ejected by photons with a wavelength of 405 nm. show answer no attempt once ejected, how long does it take the electrons with maximum kinetic energy to travel 2.1 cm to a detection device, in seconds? you may assume these electrons travel in a collisionless manner.
The time taken by photoelectrons with maximum kinetic energy to travel 2.1 cm to a detection device is approximately 6.4 x 10^-10 seconds.
Firstly, we need to find the energy of the photon using the formula E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength. Substituting the given values, we get E = 3.07 eV.
Next, we subtract the work function from the energy of the photon to find the maximum kinetic energy of the photoelectrons. Max kinetic energy = E - work function = 0.53 eV.
Now, we can use the formula v = √(2KE/m) to find the velocity of the photoelectrons, where KE is the maximum kinetic energy and m is the mass of the electron. Substituting the values, we get v = 1.6 x 10^6 m/s.
Finally, we can calculate the time taken to travel 2.1 cm using the formula t = d/v, where d is the distance and v is the velocity. Substituting the values, we get t = 6.4 x 10^-10 seconds. Therefore, the answer is approximately 6.4 x 10^-10 seconds.
Learn more about photoelectrons here:
https://brainly.com/question/16772624
#SPJ11
68) What is the average translational kinetic energy of a nitrogen molecule in the air in a room in which the air temperature is 17°C? The Boltzmann constant is 1.38 × 10-23 J/K.
A) 6.01 × 10-21 J
B) 4.00 × 10-21 J
C) 5.00 × 10-21 J
D) 7.00 × 10-21 J
E) 9.00 × 10-21 J
5.00 × 10-21 J is the average translational kinetic energy of a nitrogen molecule in the air in a room in which the air temperature is 17°C.
What is kinetic energy?Kinetic energy is the energy of motion. It is the energy possessed by a body due to its motion. It is directly proportional to the mass of the body and the square of its velocity. Kinetic energy can be converted into other forms of energy such as potential energy, heat or work. In a macroscopic system, kinetic energy can be associated with the motion of the entire body or with the motion of the individual particles that make up the body.
The average translational kinetic energy of a nitrogen molecule in the air at a temperature of 17°C can be calculated using the equation KE = (3/2)kT, where k is the Boltzmann constant (1.38 × 10-23 J/K) and T is the temperature in Kelvin (290 K). This equation gives KE = 5.00 × 10-21 J.
So, C is the right answer.
To learn more about kinetic energy
https://brainly.com/question/25959744
#SPJ4
a single loop of wire with an area of is in a uniform magnetic field that has an initial value of 3.80 t, is perpendicular to the plane of the loop, and is decreasing at a constant rate of (a) what emf is induced in this loop? (b) if the loop has a resistance of find the current induced in the loop.
Therefore, the current induced in the loop is 1.90 A.
(a) To find the emf induced in the loop, we can use Faraday's law of induction which states that the emf induced in a loop of wire is equal to the rate of change of magnetic flux through the loop. The magnetic flux is given by the product of the magnetic field and the area of the loop, so we have:
Φ = B*A
where Φ is the magnetic flux, B is the magnetic field, and A is the area of the loop. Since the magnetic field is decreasing at a constant rate, the rate of change of magnetic flux is simply the negative of the rate of change of the magnetic field, so we have:
dΦ/dt = -dB/dt
Substituting in the given values, we get:
dΦ/dt = -3.80 T/s
The emf induced in the loop is then given by:
emf = -dΦ/dt = 3.80 V
(b) To find the current induced in the loop, we can use Ohm's law which relates the current flowing through a circuit to the emf and resistance of the circuit. We have:
emf = I*R
where I is the current and R is the resistance. Substituting in the given values, we get:
I = emf/R = 3.80 V / 2.00 Ω = 1.90 A
Therefore, the current induced in the loop is 1.90 A.
To know more about magnetic field visit:
https://brainly.com/question/14848188
#SPJ11
Who gets the ticket if you get pulled over for a motor vehicle infraction while practice driving with your Examination Permit?
If you get pulled over for a motor vehicle infraction while practice driving with your Examination Permit, the driver holding the permit is the one who will receive the ticket.
The reason for this is that the permit holder is still considered an inexperienced driver and is not yet licensed to drive on their own. Therefore, they are responsible for any violations that occur while they are behind the wheel, even if they are driving with a licensed adult in the car.
It is important for those with an Examination Permit to follow all traffic laws and regulations to avoid getting pulled over and receiving a ticket. Not only can getting a ticket be costly and affect insurance rates, but it can also delay the process of getting a full driver's license.
Overall, it is crucial to remember that while practice driving with an Examination Permit, the permit holder is responsible for any violations that occur while they are driving, and they will be the one who receives the ticket if pulled over.
To know more about Examination Permit click here:
https://brainly.com/question/30378153
#SPJ11
a 7.8-kg solid sphere, made of metal whose density is 2300 kg/m3, is suspended by a cord. when the sphere is immersed in water (of density 1000 kg/m3), what is the tension in the cord?
When the solid sphere is immersed in water, the tension in the cord is approximately 42.438 N.
To calculate the tension in the cord, we need to find the buoyant force acting on the solid sphere and subtract it from the weight of the sphere.
First, we find the volume of the solid sphere using the mass and density.
Mass (m) = 7.8 kg
Density (ρ_metal) = 2300 kg/m³
Volume (V) = m / ρ_metal = 7.8 kg / 2300 kg/m³ ≈ 0.003478 m³
Next, we calculate the buoyant force (F_b) acting on the sphere when it is immersed in water.
Density of water (ρ_water) = 1000 kg/m³
Gravitational acceleration (g) = 9.81 m/s²
F_b = V × ρ_water × g ≈ 0.003478 m³ × 1000 kg/m³ × 9.81 m/s² ≈ 34.08 N
Calculate the weight (W) of the sphere.
W = m × g = 7.8 kg × 9.81 m/s² ≈ 76.518 N
Finally, calculate the tension (T) in the cord.
T = W - F_b ≈ 76.518 N - 34.08 N ≈ 42.438 N
Thus, when the solid sphere is immersed in water, the tension in the cord is approximately 42.438 N.
To know more about tension in cord, click here
https://brainly.com/question/29989325
#SPJ11
The resistance of a galvanometer coil is 30. 0 ω , and the current required for full-scale deflection is 500μA.
Part A Compute the shunt resistance.
Part B Compute the series resistance
With the same voltage, the shunt resistor should have a resistance of 30 x 10‾⁷ Ω.
The galvanometer is a device that measures the current. When it is applied to the current, the scale on the galvanometer will move. The voltage will follow the rule
V = I x R
Where V is the voltage measured, I is current and R is internal resistance in the galvanometer.
From the question above, we know that:
I = 500 μA = 500 x 10‾⁶ A
R = 30 Ω
With the same scale (full scale), the galvanometer will measure the same voltage
V₁ = V₂
I₁= I₂
V₁= I₁R₁
V₁= 500 x 10‾⁶ ×30
V₁=0.015
Therefore,
0.015 = 500 x 10‾⁶ A × R₂
R₂ = 30 ω = 30 x 10‾⁷ Ω.
To know more about shunt resistor here
https://brainly.com/question/28381948
#SPJ4
Hence, with the same voltage, the shunt resistor should have a resistance of 7.5 x 10‾⁷ Ω.
For more on voltage at: brainly.com/question/24858512
#SPJ4
What are the asteroids surrounding jupiter’s orbit called?.
The asteroids surrounding Jupiter's orbit are known as the Trojan asteroids.
What is orbit ?Orbit is the path of an object around another object, typically a planet or star. It is a predictable, repeating motion that results from the force of gravity between two bodies of mass. The larger body in a system - like the sun in our solar system - exerts a gravitational pull on the smaller one, causing it to revolve around it. This is true for all objects in space, from the smallest asteroids to the largest planets. Planets, moons, comets, asteroids, and other objects, all orbit around a central body in an elliptical path. The degree of this elliptical orbit depends on the mass of the two objects and the distance between them.
To learn more about orbit
https://brainly.com/question/28106901
#SPJ4
17) If the efficiency of a Carnot engine were to be 100%, the heat sink would have to be
A) at absolute zero.
B) at 0°C.
C) at 100°C.
D) infinitely hot.
Answer:
A) at absolute zero.
Explanation:
The efficiency of a Carnot engine is given by the formula:
η = 1 - T2/T1 where T2 is the temperature of the heat sink and T1 the temperature of the source reservoir
Both temperatures are in Kelvin
where T is the temperature of the heat sink and
Therefore for 100% efficiency, η would have to be 1 which means that the heat sink temperature which is at the numerator will have to be 0°K which is absolute zero
The spool of wire having a weight of 300 lb rests on the ground at B and against the wall at A. Determine the normal force acting on the spool at A if P=300 lb. The coefficient of static friction between the spool and the ground is 0.35. The wall at A is smooth.
According to the question the normal force acting on the spool at A is = 195 lb
What is force?Force is an invisible push or pull that can act upon objects. It is a fundamental interaction of nature, and is one of the four fundamental interactions of physics, along with gravity, electromagnetism, and the weak nuclear force. Force can cause objects to accelerate, decelerate, change direction, or even stay still. All of these changes are caused by an unbalanced force acting on an object. In physics, a force can be described mathematically as a vector quantity, with direction and magnitude both being important. Force has the ability to cause objects to move, change shape, vibrate, rotate, or accelerate.
The normal force acting on the spool at A is:
Normal force at A = 300 lb - (0.35 * 300 lb)
= 300 lb - 105 lb
= 195 lb
To learn more about force
https://brainly.com/question/12785175
#SPJ4
Proper time is the time interval between two events in a frame where the two events occur at the same point in space". When measuring proper time for a ball hitting the ground, what would be the two events that occur?
The two events that occur when measuring proper time for a ball hitting the ground would be the ball being released and the ball hitting the ground.
What is frame?In computer programming, a frame is a region of memory that stores data and/or code for a specific purpose. It is generally the smallest unit of memory management, and is the basis for other memory management techniques. Frames are typically used to store information about a process, such as its current state, or a piece of data, such as a string or array. Frames are also used to store the current instruction pointer, which is used to track the progress of the program.
The two events that occur when measuring proper time for a ball hitting the ground are the ball being released and the ball hitting the ground. As the ball is released, it starts to travel in a trajectory and the time it takes for it to hit the ground is the proper time measurement.
To learn more about frame
https://brainly.com/question/10962551
#SPJ4
FILL IN THE BLANK. If an electric circuit could be compared to a water circuit at a water park, then the current would be analogous to the ____.
Choices:
A. water pressure
B. gallons of water flowing down slide per minute
C. water
D. bottom of the slide
E. water pump
F. top of the slide
Correct answer to the question is (E) water pump.
To understand the analogy of an electric circuit to a water circuit at a water park, imagine a water slide. The water in the slide is analogous to the electric charge in the circuit, and the rate at which the water flows down the slide is analogous to the current in the circuit.
Just as the flow of water in the slide depends on the water pressure and the diameter of the slide, the current in a circuit depends on the voltage and the resistance in the circuit. Similarly, just as a water pump generates pressure to move water through the slide, a voltage source generates a potential difference to move electric charge through a circuit.
To know more about electric circuits, click here:-
https://brainly.com/question/29032441
#SPJ11
73) A refrigerator has a coefficient of performance equal to 4.2. How much work must be done on the operating gas in the refrigerator in order to remove 250 J of heat from the interior compartment?
A) 60 J
B) 120 J
C) 250 J
D) 480 J
E) 1050 J
The work done on the operating gas in the refrigerator in order to remove 250 J of heat from the interior compartment is 60 J.
The coefficient of performance (COP) of a refrigerator is defined as the ratio of the amount of heat removed from the interior compartment to the amount of work done on the operating gas. In this case, the COP is given as 4.2, which means that for every 1 J of work done on the operating gas, 4.2 J of heat can be removed from the interior compartment. Therefore, the amount of work required to remove 250 J of heat can be calculated as:
Work = Heat removed / COP = 250 J / 4.2 = 59.52 J
Rounding off to the nearest whole number, the work done on the operating gas is 60 J, which is option A.
To learn more about work:
https://brainly.com/question/18094932
#SPJ11
determine the pressure drop over the 15- m length of the pipe.express your answer to three significant figures and include the appropriate units.
The pressure drop over the 15-m length of the pipe is 0.00108 Pa. This pressure drop is very small and can be neglected for all practical purposes.
The pressure drop over the 15-m length of the pipe, we can use the formula for pressure drop in a pipe:
Δp = f * L * (ΔT / T)
here Δp is the pressure drop, f is the friction factor, L is the length of the pipe, ΔT is the temperature difference across the pipe, and T is the reference temperature.
Assuming that the temperature difference across the pipe is 10°C, and using a friction factor of 0.018, we can solve for the pressure drop as follows:
Δp = 0.018 * 15 m * (10°C / 20°C)
Δp = 0.00108 Pa
Therefore, the pressure drop over the 15-m length of the pipe is 0.00108 Pa. This pressure drop is very small and can be neglected for all practical purposes.
Learn more about pressure Visit: brainly.com/question/28012687
#SPJ4
When they reach the bottom, which has less rotational kinetic energy?
A. The hollow rod
B. The solid rodC. Neither; they have the same
The rotational kinetic energy and moment of inertia of the hollow rod are greater. Both should have the same moment of inertia and the same mass.
Option A is correct.
The rotational kinetic energy will be [tex]\frac{1}{2}[/tex] Iω² , since the rotational kinetic energy depends on its moment of the inertia .
Conclusion be, Both the hollow rod and single rod have the same mass and will be having same moment of inertia as
I = ∑ mr² ∑ overall mass
Hence , The rotational kinetic energy and moment of inertia of the hollow rod are greater.
Is there more kinetic energy at the bottom?Both have identical kinetic energies. The blocks have the same gravitational potential energy at the top because they start from the same height. Along the slope, there is no energy loss. Hence, they have a similar measure of motor energy at the base.
Learn more about rotational kinetic energy :
brainly.com/question/30459585
#SPJ4
saturn's cloud layers are much thicker than those of jupiter because saturn has saturn's cloud layers are much thicker than those of jupiter because saturn has weaker magnetic field. more moons. weaker surface gravity. lower density.
Saturn's cloud layers are much thicker than those of Jupiter because of the weaker magnetic field present around Saturn.
While Jupiter's magnetic field is strong and protects it from the solar wind, Saturn's magnetic field is weaker and doesn't provide the same level of protection. This allows more charged particles to reach Saturn's atmosphere, causing it to form thicker cloud layers. The number of moons, weaker surface gravity, and lower density of Saturn do not directly impact the thickness of its cloud layers.
Saturn's cloud layers are much thicker than those of Jupiter due to Saturn having a lower density. This lower density affects the structure and thickness of Saturn's cloud layers, whereas the magnetic field has a lesser impact on this particular aspect.
To know more about magnetic field visit:
https://brainly.com/question/14848188
#SPJ11
you have two vectors. one has a magnitude of 1.8 cm and an angle of 75.0 while the other has a magnitude of 3.8 cm at an angle of 36.8 . both angles are measured counterclockwise from the positive x-axis. what direction (as an angle counterclockwise from the positive x-axis in degrees) does the sum of these two vectors point?
The sum of the two vectors points in a direction of approximately 52.4°. This angle is measured counterclockwise from the positive x-axis.
To find the direction of the sum of the two vectors, we first need to calculate their individual components. For Vector A with magnitude 1.8 cm and angle 75.0°, we have Ax = 1.8*cos(75) and Ay = 1.8*sin(75). For Vector B with magnitude 3.8 cm and angle 36.8°, we have Bx = 3.8*cos(36.8) and By = 3.8*sin(36.8). Now, sum up the x and y components: Rx = Ax + Bx and Ry = Ay + By. Calculate the angle between the resultant vector (Rx, Ry) and the positive x-axis using the formula: θ = atan(Ry/Rx). Thus, the sum of these two vectors points in a direction of approximately 52.4° counterclockwise from the positive x-axis.
Calculation steps:
1. Calculate Ax: 1.8*cos(75) ≈ 0.467
2. Calculate Ay: 1.8*sin(75) ≈ 1.742
3. Calculate Bx: 3.8*cos(36.8) ≈ 3.057
4. Calculate By: 3.8*sin(36.8) ≈ 2.194
5. Calculate Rx: 0.467 + 3.057 ≈ 3.524
6. Calculate Ry: 1.742 + 2.194 ≈ 3.936
7. Calculate θ: atan(3.936/3.524) ≈ 0.914 radians (52.4°)
To know more about the vectors visit:
https://brainly.com/question/29713780
#SPJ11
18) The work done on an ideal gas system in an isothermal process is -400 J. What is the change in internal (thermal) energy of the gas?
A) 0 J
B) -400 J
C) 400 J
D) 200 J
The change in internal (thermal) energy of the gas is 0 J (option a). As the internal energy of the gas remains constant, the heat absorbed by the system is also zero. Hence, the change in internal energy of the gas is zero.
The change in internal energy of an ideal gas system undergoing an isothermal process, given that the work done on the system is -400 J.
In an isothermal process, the temperature of the system remains constant, and hence, the internal energy of the gas does not change.
The work done on the system is equal to the heat absorbed by the system. Since the internal energy of the gas remains constant, the heat absorbed by the system is also zero.
Therefore, the change in internal energy of the gas is zero. Hence, option A) 0 J is the correct.
For more such questions on energy, click on:
https://brainly.com/question/13881533
#SPJ11
