The sandwich and the silver dollar will pass each other at a height of 10m above the ground.
We'll consider the sandwich's trajectory and the silver dollar's fall to determine their passing position.
1. Firstly, let's analyze the sandwich's motion. Since it's thrown just hard enough to reach your friend, it will have an initial vertical velocity (V0) and cover a distance of 10 meters in its ascent. We can use the equation H = V0t - (1/2)gt^2, where H is the height, t is the time taken, and g is the acceleration due to gravity (9.81 m/s^2).
2. For the silver dollar, it's dropped from rest, meaning its initial velocity is 0. We can apply the same equation to its motion: H = (1/2)gt^2.
3. The sandwich and the silver dollar will pass each other at the same time (t) and height (H). Therefore, we can equate the two equations:
V0t - (1/2)gt^2 = (1/2)gt^2.
4. This simplifies to V0t = gt^2, and we can solve for t: t = V0/g.
5. Substitute t back into the equation for the silver dollar's motion: H = (1/2)g(V0/g)^2 = (1/2)(V0^2/g).
6. Since we don't have the numerical value of V0, we cannot find the exact height (H). However, we've established the position where the dollar and sandwich pass each other in terms of V0 and g. Their passing height will be H = (1/2)(V0^2/g) above the ground.
For more about height:
https://brainly.com/question/10726356
#SPJ11
acceleration of a car a car traveling along a straight road at 61 ft/sec accelerated to a speed of 85 ft/sec over a distance of 480 ft. what was the acceleration of the car, assuming it was constant? (round your answer to two decimal places.)
The acceleration of the car was 4.94 ft/sec², assuming it was constant.
To arrive at this answer, we need to use the formula for acceleration, which is:
[tex]a = \frac{(vf - vi)}{t}[/tex]
where a is acceleration, [tex]v_{f}[/tex] is final velocity, [tex]v_{i}[/tex] is initial velocity, and t is time.
Since the problem tells us that the car traveled a distance of 480 ft and accelerated from 61 ft/sec to 85 ft/sec, we can first calculate the time it took for this acceleration to occur:
[tex]t = \frac{d}{v}[/tex]
[tex]= \frac{480 ft}{(85 ft/sec - 61 ft/sec)}[/tex]
= 12 seconds
Now we can use the acceleration formula, with [tex]v_{i}[/tex] = 61 ft/sec,[tex]v_{f}[/tex] = 85 ft/sec, and t = 12 seconds:
[tex]a =\frac{(85 ft/sec - 61 ft/sec)}{12 sec }[/tex]
[tex]= 4.94 ft/sec^{2}[/tex]
Therefore, the acceleration of the car was [tex]4.94 ft/sec^{2}[/tex].
We can say that the car experienced a constant acceleration of [tex]4.94 ft/sec^{2}[/tex] as it traveled along the straight road and increased its speed from 61 ft/sec to 85 ft/sec over a distance of 480 ft.
For more information on acceleration kindly visit to
https://brainly.com/question/13946914
#SPJ11
two long, parallel wires are a distance r apart and carry equal currents in the same direction. if the distance between the wires triples, while the currents remain the same, what effect does this have on the attractive force per unit length felt by the wires?multiple choicethe force per unit length increases by a factor of one third.the force per unit length decreases by half.the force per unit length increases by half.the force per unit length decreases by a factor of one third.
The force per unit length decreases by a factor of one third.The attractive force per unit length between the wires is given by the equation F/L = μ₀I²/2πr, where F is the force, L is the length, μ₀ is the permeability of free space, I is the current, and r is the distance between the wires.
If the distance between the wires triples, the force per unit length will decrease. This is because r is in the denominator of the equation, so increasing the value of r will decrease the overall value of F/L.
To find the factor by which the force per unit length changes, we can use the equation above and substitute 3r for r.
F/L = μ₀I²/2π(3r) = (1/3)(μ₀I²/2πr)
Therefore, the force per unit length decreases by a factor of one third.
To know more about current visit:
https://brainly.com/question/2424523
#SPJ11
esvoe2d0ed08ecb062e3d06c06fa518f2cfa271dd4d07f77922df45f53a2704d2541aeovse two people are talking at a distance of 3.0 m from where you are, and you measure the sound intensity as 1.1*10^-7 w/m^2. another student is 4.0 m away from the talkers. calculate a reasonable estimate for the sound intensity that the other student measures.
The sound intensity that the other student measures is approximately 6.1875 x 10^-8 W/m^(2). This is calculated using the inverse square law.
To estimate the sound intensity that the other student measures, we can use the inverse square law for sound intensity. The formula for the inverse square law is I2 = I1 * (d1^(2) / d2^(2)), where I1 is the initial sound intensity, I2 is the final sound intensity, d1 is the initial distance, and d2 is the final distance.
Calculation steps:
1. Plug in the given values: I1 = 1.1 x 10^(-7) W/m^(2), d1 = 3.0 m, and d2 = 4.0 m.
2. Calculate the ratio of the distance squares: (3.0 m)^(2) / (4.0 m)^(2) = 9 / 16.
3. Multiply the initial intensity by the ratio: (1.1 x 10^(-7) W/m^(2)) * (9/16) = 6.1875 x 10^(-8) W/m^(2).
Hence, the sound intensity that the other student measures is approximately 6.1875 x 10^(-8) W/m^(2).
To know more about the sound intensity visit:
https://brainly.com/question/17062836
#SPJ11
A tired squirrel (mass of 1 kg) does push-ups by applying a force to elevate its center-of-mass by 5 cm. Estimate the number of push-ups that a tired squirrel must do in order to do a approximately 5.0 Joules of work.
Work, Energy, and Power: Calculating the Amount of Work Done by Forces
The number of push-ups in center-of-mass that a tired squirrel must do in order to do a approximately 5.0 Joules of work is 10.2 push-ups.
What is center-of-mass?Center of mass (COM) is a concept used in physics to describe the average position of a group of particles that make up a system. This point is of significant importance in mechanics, since all the external forces that act on the system, as well as its internal forces, can be calculated using the COM.
The amount of work done by a force is equal to the magnitude of the force multiplied by the distance the object moves in the direction of the force.
Therefore, the amount of work done by the tired squirrel is:
Work = Force × Distance
Work = (1 kg) × (9.8 m/s2) × (0.05 m) = 0.49 Joules
To do 5.0 Joules of work, the tired squirrel must do (5.0 Joules) / (0.49 Joules) = 10.2 push-ups.
To learn more about center-of-mass
https://brainly.com/question/28021242
#SPJ4
in a constant-volume process, 210 j of energy is transferred by heat to 1.01 mol of an ideal monatomic gas initially at 305 k. (a) find the work done on the gas. j (b) find the increase in internal energy of the gas. j (c) find its final temperature.
A. the work done on the gas is zero, the gas is equal to the energy transferred by heat, 210 J. and the final temperature of the gas is 358.3 K.
What is temperature?Temperature is a measure of hotness or coldness of an object or substance. It is measured by thermometers using the Celsius (°C) or Fahrenheit (°F) scales. Temperature is an important factor in determining the rate of chemical reactions, the properties of substances, and the state of matter.
a) The work done on the gas is given by the equation:
Work = -PΔV
Since the process is a constant-volume process, the change in volume, ΔV, is zero. Therefore, the work done on the gas is zero.
b) The increase in internal energy of the gas is given by the equation:
ΔU = Q - W
Since the work done on the gas is zero, the increase in internal energy of the gas is equal to the energy transferred by heat, 210 J.
c) The final temperature of the gas is given by the equation:
Q = nCvΔT
where n is the number of moles of the ideal gas, Cv is the molar heat capacity at constant volume, and ΔT is the change in temperature.
Substituting the given values, we get:
210 J = 1.01 mol x (3/2)R x ΔT
Therefore, the final temperature of the gas is:
ΔT = (210 J)/[1.01 mol x (3/2)R] = 53.3 K
Therefore, the final temperature of the gas is 358.3 K.
To learn more about temperature
https://brainly.com/question/26866637
#SPJ4
in a tanning bed, exposure to photons of wavelength 300 nm or less can do considerable damage. part a determine the lowest energy in electron volts of such photons. express your answer in electronvolts.
In a tanning bed, exposure to photons of wavelength 300 nm, the lowest energy of such photons will be 4.136 eV .
There is a wavelength and a frequency for each photon. The frequency is characterized as the distance between two pinnacles of the electric field with a similar vector. The number of wavelengths that a photon travels through in a second is what is referred to as its frequency. Not at all like an electromagnetic wave, a photon can't really be of a variety.
Given wavelength = 300 nm
so, let the energy of the photons is E
E = h × c/(wavelength × e)
E = 6.626 ×10⁻³⁴ × 3 × 10⁸/(300 × 10⁻⁹ × 1.602 × 10⁻¹⁹)
E = 4.136 eV
Hence , the lowest energy of such photons is 4.136 eV
How are photons connected with frequency?The energy of a photon is inversely proportional to the electromagnetic wave's wavelength. The more limited the frequency, the more enthusiastic is the photon, the more drawn out the frequency, the less lively is the photon. Photons can be made and annihilated while preserving energy and force.
Learn more about Photon :
brainly.com/question/30820906
#SPJ4
What are the 5 human senses. Thanks! Brainliest to first answer!
What terrestrial world is shown in this visible-light photo?.
The terrestrial world shown in this visible-light photo is Earth.
Earth is a terrestrial planet, meaning it is a rocky planet like Mercury, Venus, and Mars. It is the third planet from the sun and is the only known planet to have life.
Visible light can be used to capture images of many different terrestrial worlds, including planets, moons, and asteroids in our solar system, as well as exoplanets orbiting other stars. If you could provide more context or details about the photo in question, I may be able to help you identify the terrestrial world shown.
To know more about visible-light, visit;
https://brainly.com/question/26970988
#SPJ11
is the magnitude of the impulse imparted to ball b greater than, less than, or equal to that imparted to ball a?
The magnitude of the impulse imparted to ball b is less than that imparted to ball a. This is because the impulse imparted to a body is equal to the product of the force applied and the time for which it acts.
Since in this case, the force applied on ball b is less than the force applied on ball a and both are acting for the same amount of time, the impulse imparted to ball b is less than that imparted to ball a. In other words.
since ball b has a smaller mass than ball a, it requires less force to cause the same change in momentum and therefore, the impulse imparted to it is also less.
Know more about magnitude here
https://brainly.com/question/14452091#
#SPJ11
the sled is then pulled up a steeper hill of the same height as the hill sketched above. how will the velocity of the sled at the bottom of the hill (after it has slid down) compare to that of the sled at the bottom of the original hill?
The velocity of the sled at the bottom of the steeper hill will be greater than the velocity of the sled at the bottom of the original hill.
A hill is a landform that is elevated above the surrounding area, with a sloping surface that usually rises to a peak or summit. Hills can be formed by various geological processes such as erosion, tectonic uplift, or volcanic activity. They are typically smaller than mountains and are often used for recreational activities such as hiking, skiing, or sledding. The shape and size of a hill can influence the way it is used and perceived, and it can also affect the movement and behavior of wildlife and plant communities. A hill is a landform that is higher than the surrounding area and has a distinct summit. It is typically formed by natural processes such as erosion, deposition, or tectonic activity, although human activity such as excavation or construction can also create hills.Hills are typically less steep and smaller than mountains, with a summit that is rounded or slightly flattened. They are commonly found in landscapes with rolling terrain or gentle slopes and can be covered by vegetation such as grasses, shrubs, and trees.
To know more about hill visit :
https://brainly.com/question/12559629
#SPJ11
a block of metal weighs 40 n in air and 30 n in water. what is the buoyant force on the block due to the water? the density of water is 1000 kg/m3. a block of metal weighs 40 n in air and 30 n in water. what is the buoyant force on the block due to the water? the density of water is 1000 kg/m3. 40 n 70 n 30 n 10 n
To calculate the buoyant force, subtract the weight of the block in water from its weight in air which will give 10 N.
The buoyant force on a block of metal submerged in water can be determined by comparing its weight in air and its weight in water. In this case, the block weighs 40 N in air and 30 N in water. The difference in these weights is due to the buoyant force acting on the block when it is submerged in water.
To calculate the buoyant force, subtract the weight of the block in water from its weight in air: 40 N (air) - 30 N (water) = 10 N. Therefore, the buoyant force acting on the block due to the water is 10 N. This force is caused by the pressure of the water pushing up on the block, effectively making it feel lighter. The density of water (1000 kg/m³) is not required to determine the buoyant force in this scenario, as the information provided is sufficient to directly calculate the force.
Learn more about buoyant force here:
https://brainly.com/question/21990136
#SPJ11
specify a natural phenomenon that exhibits a similar spectrum of a white-light source like what you observed in step p2, and briefly discuss how it is formed. does it also possess the higherorder spectrums that you saw in step p2? explain
A rainbow is a natural phenomenon that exhibits a similar spectrum to a white-light source observed in step P2, and it also possesses higher-order spectrums due to multiple internal reflections within water droplets.
A natural phenomenon that exhibits a similar spectrum of a white-light source like what you observed in step P2 is a rainbow. A rainbow is formed when sunlight is refracted, reflected, and dispersed through water droplets in the atmosphere, separating the light into its various colors.
Just like the white-light source in step P2, a rainbow does possess higher-order spectrums. These higher-order spectrums are formed due to multiple internal reflections of light within the water droplets. However, these higher-order spectrums are usually less intense and harder to observe, as the light undergoes more attenuation with each successive reflection.
Learn more about natural phenomenon here,
https://brainly.com/question/28568475
#SPJ11
Two balls, identical except for color, are thrown from the roof of a tall building at the same instant. The red ball is thrown up with speed v and the blue ball is thrown downward, also with speed v. Ignore air resistance. Which of the following statements is true? Select the correct answer a the blue ball reaches the ground first but b the red ball has more speed. O the red ball reaches the ground first.
c both balls land with the same speed, but at different times.
d both balls land at the same time but the red ball has more speed. e both balls land at the same time.
The acceleration of gravity is always acting downwards, regardless of the direction of motion of the object. e) Both balls land at the same time.
When the balls are thrown from the roof of the building, they both experience the same acceleration due to gravity. Therefore, the time it takes for each ball to reach the ground will be the same. The initial upward or downward velocity of the balls will not affect the time it takes to reach the ground. Hence, option (e) is correct. Both balls will land at the same time, regardless of their initial velocities. The velocities of the balls when they hit the ground will depend on their initial velocities and the distance they fall. However, since they are identical balls, they will have the same velocity when they hit the ground.
Learn more about “ acceleration of gravity “ visit here;
https://brainly.com/question/2626017
#SPJ4
a graduate student in astronomy needs to measure the mass of a spiral galaxy she is studying for her phd thesis. which of the following observations would be important for her to make?
Obtain the speed at which stars or gas near the outer regions of the galaxy are moving around. This will help the graduate student measure the mass of the galaxy by applying the equation for the circular velocity of a rotating object, which is related to its mass.
What is galaxy?A galaxy is a massive, gravitationally bound system consisting of stars, gas, dust, and dark matter. It is held together by gravity and comprises of billions of stars and their planetary systems, dust, and interstellar gas. Galaxies come in various sizes and shapes, and are classified according to their visual appearance. They can be spiral, elliptical, or irregular in shape. The Milky Way, our own galaxy, contains over 200 billion stars, and is estimated to be 13.51 billion years old.
To learn more about galaxy
https://brainly.com/question/17117676
#SPJ4
Complete Question:
9/ A graduate student in astronomy needs to measure the mass of a spiral galaxy she is studying for her PhD thesis. Which of the following observations would be important for her to make?
construct an H-R diagram for a prominent open cluster in the galaxy's disk
measure the gamma-ray emission from the galaxy
compare the overall color of the galaxy to other galaxies of the same type
determine whether or not there is evidence for a massive black hole at the galaxy's center
obtain the speed at which stars or gas near the outer regions of the galaxy are moving around
determine gravitational field of earth at a height of 6.4*10^6 m. earths mass is 6.0*10^24 kg and its radius is 6.4*10^6 m
The gravitational field of Earth at a height of 6.4*10⁶ m is approximately 1.56 m/s² The gravitational field at a height h above the surface of Earth can be calculated using the formula:
g = G * M / (R + h)²
where G is the gravitational constant (6.6743 × 10⁻¹¹ m³ kg⁻¹ s⁻² ), M is the mass of Earth, R is the radius of Earth, and h is the height above the surface.
Substituting the given values, we get:
g = 6.6743 × 10⁻¹¹ * 6.0 × 10²⁴ / (6.4 × 10⁶ + 6.4 × 10⁶)²
g = 1.56 m/s²
Therefore, the gravitational field of Earth at a height of 6.4*10⁶ m is approximately 1.56 m/s².
Learn more about “ gravitational field “ visit here;
https://brainly.com/question/26690770
#SPJ4
a 121 kg horizontal platform is a uniform disk of radius 1.71 m and can rotate about the vertical axis through its center. a 66.9 kg person stands on the platform at a distance of 1.19 m from the center, and a 25.5 kg dog sits on the platform near the person 1.35 m from the center. find the moment of inertia of this system, consisting of the platform and its population, with respect to the axis. moment of inertia:
Answer: To find the moment of inertia of the system consisting of the platform, person, and dog, we can use the formula:
I = I_platform + I_person + I_dog
where I_platform, I_person, and I_dog are the moments of inertia of the platform, person, and dog, respectively.
The moment of inertia of the platform can be found using the formula for the moment of inertia of a uniform disk:
I_platform = (1/2)MR^2
where M is the mass of the platform and R is its radius. Substituting the given values, we get:
I_platform = (1/2)(121 kg)(1.71 m)^2
I_platform = 182.34 kg·m^2
The moment of inertia of the person can be found using the parallel axis theorem, which states that the moment of inertia of a body about an axis parallel to its center of mass is given by:
I_person = I_cm + Md^2
where I_cm is the moment of inertia of the person about their center of mass, M is their mass, and d is the distance between the axis and their center of mass. We can assume that the person is a uniform rod, so the moment of inertia about their center of mass is:
I_cm = (1/12)ML^2
where L is their length. Substituting the given values, we get:
I_cm = (1/12)(66.9 kg)(2(1.19 m))^2
I_cm = 6.07 kg·m^2
Substituting this into the parallel axis theorem, we get:
I_person = 6.07 kg·m^2 + (66.9 kg)(1.19 m)^2
I_person = 83.18 kg·m^2
The moment of inertia of the dog can also be found using the parallel axis theorem, assuming that the dog is a uniform cylinder. The moment of inertia about the center of mass of a cylinder is (1/2)MR^2, so the moment of inertia about the axis passing through the center of mass is:
I_dog = (1/2)MR^2 + Md^2
where M is the mass of the dog, R is the radius of the dog, and d is the distance between the axis and the center of mass of the dog. Substituting the given values, we get:
I_dog = (1/2)(25.5 kg)(0.15 m)^2 + (25.5 kg)(1.35 m)^2
I_dog = 7.68 kg·m^2
Finally, we can substitute all the values into the formula for the total moment of inertia:
I = I_platform + I_person + I_dog
I = 182.34 kg·m^2 + 83.18 kg·m^2 + 7.68 kg·m^2
I = 273.20 kg·m^2
Therefore, the moment of inertia of the system consisting of the platform, person, and dog, with respect to the axis passing through the center, is 273.20 kg·m^2.
did your results for the weight of the displaced water and the buoyant force in part a allow you to confirm archimedes' principle? what is your justification? if not, what seemed to be the issue with your data? write out your answer in a clear and well supported paragraph.
our results confirmed Archimedes' principle, and we were able to support this principle with the measurements we obtained. We can therefore conclude that the buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object, in accordance with Archimedes' principle.
In part a of the experiment, we measured the weight of the displaced water and the buoyant force acting on an object immersed in water. These measurements allowed us to confirm Archimedes' principle, which states that the buoyant force acting on an object is equal to the weight of the water displaced by that object. Our results were in agreement with this principle, as the buoyant force we measured was equal to the weight of the water displaced by the object.
The principle of Archimedes is based on the fact that an object immersed in a fluid will experience a buoyant force that is equal to the weight of the fluid displaced by the object. This principle applies to any object, regardless of its size or shape, as long as it is fully submerged in the fluid. Our measurements in part a allowed us to verify this principle, as the weight of the displaced water was found to be equal to the buoyant force acting on the object.
our results confirmed Archimedes' principle, and we were able to support this principle with the measurements we obtained. We can therefore conclude that the buoyant force acting on an object submerged in a fluid is equal to the weight of the fluid displaced by the object, in accordance with Archimedes' principle.
To know more about Archimedes' principle visit:
brainly.com/question/787619
#SPJ11
Niobium metal becomes a superconductor when cooled below 9 K. Its superconductivity is destroyed when the surface magnetic field exceeds 0.100 T. In the absence of any external magnetic field, determine the maximum current a 5.99 mm diameter niobium wire can carry and remain superconducting.
Maximum current a 5.99 mm diameter niobium wire can carry and remain superconducting is approximately 1508 A.
To determine the maximum current a 5.99 mm diameter niobium wire can carry and remain superconducting, we need to use the critical magnetic field (Hc) formula and the Ampère's Law:
Hc = Bc / μ₀
I = 2πr * Hc
Where Bc is the critical magnetic field (0.100 T), μ₀ is the permeability of free space (4π × 10⁻⁷ Tm/A), r is the radius of the wire, and I is the maximum current.
First, find Hc:
Hc = 0.100 T / (4π × 10⁻⁷ Tm/A) ≈ 79578 A/m
Next, find the radius of the wire:
r = (5.99 mm / 2) * 10⁻³ m = 2.995 * 10⁻³ m
Finally, find the maximum current (I):
I = 2π(2.995 * 10⁻³ m) * 79578 A/m ≈ 1508 A
Therefore, the maximum current a 5.99 mm diameter niobium wire can carry and remain superconducting is approximately 1508 A.
To know more about maximum current, refer
https://brainly.com/question/27839310
#SPJ11
18) The volume coefficient of thermal expansion for gasoline is 950 × 10-6 K-1. By how many cubic centimeters does the volume of 1.00 L of gasoline change when the temperature rises from 30°C to 50°C?
A) 6.0 cm3
B) 12 cm3
C) 19 cm3
D) 37 cm3
The volume of 1.00 L of gasoline change when the temperature rises from 30°C to 50°C is (B) 12 cm3.
What is volume ?Volume is the quantity of three-dimensional space that an object occupies or contains. It is measured in cubic units, such as cubic centimeters (cm3) or cubic meters (m3). Volume is an important concept in various areas of mathematics, including geometry and calculus. It is used to measure the size of solids and the capacity of containers, such as barrels, tanks and other vessels.
The volume coefficient of thermal expansion for gasoline is 950 × 10-6 K-1. This means that for every Kelvin increase in temperature, the volume of gasoline will increase by 950 × 10-6 cm3. To calculate the change in volume when the temperature rises from 30°C to 50°C, we can calculate the difference in temperature in Kelvin (50°C - 30°C = 20°C = 20 K). We can then multiply this difference by the volume coefficient of thermal expansion, which will give us the change in volume. Thus,The change in volume for 1.00 L of gasoline is (950 × 10-6 K-1) × (20 K) = 12 cm3.
Therefore the correct answer is B .
To learn more about volume
https://brainly.com/question/29796637
#SPJ4
a particle with a charge of 0.6 c is moving at right angles to a uniform magnetic field with a strength of 0.5 t. the velocity of the charge is 860 m/s. what is the magnitude of the magnetic force exerted on the particle?the magnitude of the magnetic force exerted on the particle isn.
The magnitude of the magnetic force exerted on the particle is 258 N.
This is calculated using the formula F = qvB sinθ, where F is the force, q is the charge, v is the velocity, B is the magnetic field strength, and θ is the angle between the velocity and magnetic field.
To find the magnitude of the magnetic force exerted on a particle with a charge of 0.6 C moving at right angles to a uniform magnetic field with a strength of 0.5 T and a velocity of 860 m/s, we can use the formula F = qvB sinθ. Since the particle is moving at right angles to the magnetic field, the angle θ is 90° and sinθ equals
Therefore, the formula becomes F = qvB.
By plugging in the given values (q = 0.6 C, v = 860 m/s, B = 0.5 T),
we get F = (0.6 C)(860 m/s)(0.5 T) = 258 N.
Thus, the magnitude of the magnetic force exerted on the particle is 258 N.
To know more about the magnetic field visit:
https://brainly.com/question/31381556
#SPJ11
. In the "equal and opposite" Newton's Third Law, reaction force to a bat hitting a ball is the _________________.A. bat having a greater force on the ball than the ball has on the batB. ball putting equal force on the batC. ball having greater force than the batD. ball stopping
In the "equal and opposite" Newton's Third Law, reaction force to a bat hitting a ball is the B. ball putting equal force on the bat.
According to Newton's Third Law of Motion, for every action, there is an equal and opposite reaction. When a bat hits a ball, the bat exerts a force on the ball, and in return, the ball exerts an equal and opposite force on the bat. This means that the force of the ball pushing back on the bat is just as strong as the force of the bat hitting the ball. Therefore, the correct answer is that the ball puts an equal force on the bat.
To learn more about Newton's Law, click here:
https://brainly.com/question/974124
#SPJ11
The explanation for refraction must involve a change in:.
Refraction occurs when light passes from one medium to another, such as air to water, and its speed changes.
What is refraction ?Refraction is a phenomenon of light where it bends when it passes through various mediums such as glass, water, or air. When light passes from one medium to another, it changes direction and bends towards the normal line, which is an imaginary line that is perpendicular to the surface of the medium. This phenomenon occurs because the speed of light changes when it passes through different mediums. For example, when light moves from a denser medium such as glass or water to a less dense medium such as air, it bends away from the normal line. Refraction also affects how we perceive things, as it changes the direction of the light, making objects appear closer or more distant than they actually are.
To learn more about refraction
https://brainly.com/question/27932095
#SPJ4
A uniform ladder 5. 0 m long rests against a frictionless, vertical wall with its lower end 3. 0 m from the wall. The ladder weighs 160 n. The coefficient of static friction between the foot of the ladder and the ground is 0. 40. A man weighing 740 n climbs slowly up the ladder.
Since this is greater than the maximum frictional force of 64 N, the ladder will begin to slip. To prevent this from happening, the man must climb the ladder carefully and slowly, so that the horizontal component of his weight does not exceed the maximum frictional force.
To solve this problem, we need to consider the forces acting on the ladder and the man.
First, let's consider the ladder. The ladder has a weight of 160 N acting downwards, and a normal force acting upwards from the ground. Since the ladder is not accelerating vertically, the normal force must be equal in magnitude and opposite in direction to the weight of the ladder, which means the normal force is 160 N as well.
Next, let's consider the man. The man has a weight of 740 N acting downwards, and a normal force acting upwards from the ladder. Since the man is not accelerating vertically, the normal force must be equal in magnitude and opposite in direction to the weight of the man, which means the normal force is 740 N as well.
Now, let's consider the forces acting horizontally on the ladder. The only force acting horizontally is the frictional force between the ladder and the ground. The maximum frictional force is given by the coefficient of static friction multiplied by the normal force, which in this case is 0.4 x 160 N = 64 N. As long as the horizontal component of the ladder's weight and the man's weight do not exceed 64 N, the ladder will remain in static equilibrium and not slip.
To find the horizontal component of the ladder's weight, we can use trigonometry. The angle between the ladder and the ground is given by:
θ = tan⁻¹(3.0 m / 5.0 m)
= 31.0°
The horizontal component of the ladder's weight is then:
F_h = 160 N x cos(31.0°)
= 138.7 N
The horizontal component of the man's weight is:
F_h = 740 N x cos(31.0°)
= 640.7 N
The total horizontal force acting on the ladder is the sum of these two forces:
F_total = 138.7 N + 640.7 N
= 779.4 N
To know more about maximum frictional force,
https://brainly.com/question/3389350
#SPJ11
a 25kg child slides, from rest, down a playground slide that is 4.0m long, as shown in the figure. the slide makes 40 degrees angle with the horizontal. the child's speech at the bottom is 3.2m/s. what was the force of friction that the slide was exerting on the child?
The force of friction that the slide will be exerting on the child was 64 N.
To find the force of friction, we first need to determine the acceleration of the child as they slide down the slide. We can use the conservation of energy to do this.
The initial potential energy of the child is given by:
Ep = mgh
where m is the mass of the child, g is the acceleration due to gravity (9.8 m/s²), and h is the height of the slide. Since the child starts from rest, all of this potential energy is converted to kinetic energy at the bottom of the slide:
Ek = 1/2 mv²
where v is the final speed of the child at the bottom of the slide.
Since energy is conserved, we can set Ep equal to Ek:
mgh = 1/2 mv²
Simplifying this equation, we get:
g*h = 1/2 v²
Plugging in the values given in the problem, we get:
(9.8 m/s²)(4.0 m) = 1/2 (3.2 m/s)²
Solving for v, we get:
v = 3.2 m/s
Therefore, the acceleration of the child down the slide is given by:
a = (v² - u²) / (2s)
where u is the initial speed (0 m/s) and s is the distance down the slide (4.0 m). Plugging in the values, we get:
a = (3.2² - 0²) / (2*4.0) = 2.56 m/s²
To find the force of friction, we can use Newton's second law, which states that the force (F) acting on an object is equal to its mass (m) times its acceleration (a):
F = ma
Plugging in the values, we get:
F = (25 kg)(2.56 m/s²) = 64 N
Therefore, the force of friction that the slide was exerting on the child was 64 N.
To know more about friction
https://brainly.com/question/15396341
#SPJ1
Explanation:
Initial potential energy = mgh = 25 kg * 9.81 m/s^2 * 4 sin 40 m =630.574 J
At bottom, all of this energy has been converted to kinetic energy and lost as friction
KE at bottom = 1/2 mv^2 = 1/2 25 * 3.2 ^2 = 128 J
so 630.574 - 128 = 502 .57 J of energy lost due to work of friction
502.57 = Ff * d
502.57 = Ff * 4 m
Ff = 125.6 N
As a check, let's solve by a second method:
the AVERAGE velocity of the child is (3.2 - 0 ) / 2 = 1.6 m/s
so the 4 meters of slide will be covered in 4 / 1.6 = 2.5 seconds
therefore the acceleration is Δv/Δt = 3.2 / 2.5 = 1.28 m/s^2
Fdp = 25 kg * 9.81 m/s^2 * sin 40 = 157.644 N
The NET force acting down the plane to accelerate the child is Fdp - Ff :
F = ma
( Fdp - Ff ) = ma
157.644 - Ff = 25 kg ( 1.28 m/s^2) shows Ff = 125.6 N Just like we found by the first method ! ✓ CHECK !
What factors affect the force of friction between two solid objects? Select all that apply.
how hard the surfaces press on each other
the surface areas of the objects
the speed of the objects
the types of surfaces involved
The four factors that affect the force of friction between two solid objects are how hard the surfaces press on each other, the surface areas of the objects, the speed of the objects, and the types of surfaces involved.
What is friction?Friction is the force that resists the relative motion of two objects that are in contact with each other. It is created when two surfaces rub together and is dependent on the nature of the surfaces, the degree of the contact between them, and the amount of the force that is pressing the surfaces together. Friction is important in everyday life, as it helps us to walk and to keep objects from sliding away from us. It can also be a hindrance, as it causes objects to slow down or stop when moving.
The force of friction is dependent on the amount of pressure that the surfaces are pressing against each other, meaning that greater pressure will result in a greater coefficient of friction. The surface areas of the objects also have an effect, with greater surface area resulting in a larger coefficient of friction. The speed of the objects also affects the force of friction, as faster speeds will increase the coefficient of friction. Finally, the types of surfaces involved can have an effect on the coefficient of friction, as some materials have a greater coefficient of friction than others.
To learn more about friction
https://brainly.com/question/24338873
#SPJ4
Suppose you wish to fabricate a uniform wire from 1.20 g of copper. The wire is to have a resistance of
R = 0.800 Ω
and all the copper is to be used.
(a) What must be the length of this wire?
m
(b) What must be the diameter of this wire?
µm
(a) The length of the wire can be found using the formula for resistance:
R = ρL/A
where ρ is the resistivity of copper, L is the length of the wire, and A is the cross-sectional area of the wire. Solving for L, we get:
L = RA/ρ
We are given R and the mass of copper, so we need to find A and ρ. The density of copper is 8.96 g/cm^3, so the volume of copper in the wire is:
V = m/ρ = 1.20 g / (8.96 g/cm^3) = 0.134 cm^3
Since the wire is uniform, its volume is equal to the volume of a cylinder with length L and diameter d:
V = πd^2L/4
Solving for the diameter, we get:
d = sqrt(4V/πL)
Now we can substitute this expression for d into the expression for the cross-sectional area of the wire:
A = πd^2/4 = π(4V/πL)/4 = V/L
Substituting these expressions for A and ρ into the expression for L, we get:
L = RA/(m/ρ) = RρV/m = Rρ(m/ρ^3)/m = R/ρ^2 = R/(8.96x10^-9)^2
Plugging in the values, we get:
L = 0.800 Ω / (8.96x10^-9 Ωm^2) = 98.2 m
Therefore, the length of the wire must be 98.2 m.
(b) Now that we know the length of the wire, we can use the expression for the diameter that we derived earlier:
d = sqrt(4V/πL) = sqrt(4(0.134 cm^3)/π(98.2 m)) = 1.16 µm
Therefore, the diameter of the wire must be 1.16 µm.
To solve this problem, we used the formula for resistance and the properties of copper to find the length and diameter of the wire. We started by finding the volume of copper in the wire using its mass and density. Since the wire is uniform, its volume is equal to the volume of a cylinder, which allowed us to find the cross-sectional area of the wire. Then we used the formula for resistance to find the length of the wire, and finally we used the expression for diameter that we derived earlier to find the diameter of the wire.
Learn more about resistance
https://brainly.com/question/17563681
#SPJ11
an isolated object is initially spinning at a constant speed. then, although no external forces act upon it, its rotational speed increases. this must be due to
When no external forces are acting upon an object, its angular momentum remains constant (angular momentum conservation). However, the angular velocity can change if the moment of inertia changes, so an increase in the rotational speed must be due to a decrease in the moment of inertia.
What is angular velocity?Angular velocity is a measure of the rate of change of an object's angular position over time. It is measured in radians per second, and is usually denoted by the Greek letter omega (ω). Angular velocity is usually expressed in terms of either rotations per second or degrees per second. It is related to linear velocity, which is the speed of an object in a straight line. Angular velocity can also be related to angular acceleration, which is the rate of change of angular velocity over time. Angular velocity is an important concept in physics, as it is used to describe the motion of objects within a rotating system.
This can be caused by an increase in the mass of the object, which would decrease the moment of inertia.
To learn more about angular velocity
https://brainly.com/question/29342095
#SPJ4
Complete Question:
A 250-turn solenoid carries a current of 9.0 A. The radius of the solenoid is 0.075 m; and its length is 0.14 m. Determine the magnetic flux through the circular cross-sectional area at the center of the solenoid.
A) 1.8 x 10^-5 Wb
B) 9.9 x 10^-5 Wb
C) 3.6 x 10^-4 Wb
D) 7.0 x 10^-4 Wb
E) 2.2 x 10^-3 Wb
A 250-turn solenoid carries a current of 9.0 A. The radius of the solenoid is 0.075 m; and its length is 0.14 m. The magnetic flux through the circular cross-sectional area at the center of the solenoid is 1.8 x 10^-5 Wb.
We can use the formula for the magnetic field inside a solenoid, which is given by:
B = μ₀nI
where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current. We can find the number of turns per unit length, n, by dividing the total number of turns by the length of the solenoid:
n = N/L = 250/0.14 = 1786 turns/m
Substituting the values given, we get:
B = μ₀nI = 4π x 10^-7 T·m/A x 1786 turns/m x 9.0 A = 5.06 x 10^-3 T
The magnetic flux through the circular cross-sectional area at the center of the solenoid is given by:
Φ = BA
where A is the area of the cross section.
Substituting the values given, we get:Φ = (5.06 x 10^-3 T) x (π x (0.075 m)^2) = 8.96 x 10^-5 WbTherefore, the answer is A) 1.8 x 10^-5 Wb.
To know more about magnetic field, click here https://brainly.com/question/23096032
#SPJ11
if you were to integrate around the curve in the opposite direction, what would be the value of the line integral? express your answer in tesla-meters.
The value of a line integral is determined by the path taken and the vector field being integrated over. Reversing the direction of integration would change the path taken and therefore change the value of the line integral.
what is line integral?
A line integral is a type of integral in calculus that is used to calculate the total value of a vector field along a curve or path. It involves integrating a vector field over a curve or path, and can be used to find the work done by a force along a path, or the circulation of a fluid along a closed loop, among other things.
To learn more about force visit:
brainly.com/question/13191643
#SPJ11
A 20.0 kg cannonball is fired from a 2.40 ´ 103kg. If the cannon recoils with a velocity of 3.5 m/s backwards, what is the velocity of the cannonball?
Answer:420ms^-1
Conserving linear momentum (mv)=(MV)
