You use a ruler marked with 1 mm increments to measure the lengths of the height h of a block and find h = 121 mm. According to the half least count rule, what is the uncertainty in your measurement of the height?

In magnetic elements, each atom’s magnetic domains are aligned which creates magnetic force. In nonmagnetic elements, each atom’s domains are pointing in the different directions so, resulting element has nonmagnetic force.

Attraction or repulsion that arises between electrically charged particles because of their motion is called magnetic force and it is the basic force responsible for such effects as action of electric motors and also attraction of magnets for iron.

Magnetism is caused by motion of electric charges. Every substance is made up of tiny units called atoms and each atom has electrons, particles that carry electric charges. Spinning like tops, electrons circles the nucleus, or core, of an atom.

To know more about magnetic force, refer

https://brainly.com/question/2279150

#SPJ1

The energy transfer that takes place as the ball changes shape during the contact between the racquet and the ball is due to the changes in shape results in deformation of the ball that converts kinetic energy from the racquet into elastic potential energy in the ball.

When a ball strikes a racquet, the kinetic force of racquet causes the ball to compress, which results in a change in its shape and the energy is transferred from the racquet to the ball, and the work done by the racquet on the ball increases the potential energy stored in the compressed ball, and the ball bounces.

Hence, changes in shape results in deformation of the ball and converts kinetic energy present in the racquet to elastic potential energy in the ball and bounces it.

Learn more about kinetic energy here.

https://brainly.com/question/10427150

#SPJ9

The question is incomplete, the complete question is here

State the energy transfer that takes place as the ball changes shape during the contact between the racquet and the ball.

The large ball, small ball, and feather fall to Earth and do not move towards each other due to the force of gravity, which is proportional to the mass of the objects involved and inversely proportional to the square of the distance between them. Earth's gravitational force is much stronger than the gravitational force between the objects, leading to their downward motion.

The reason the large ball, small ball, and feather fall to Earth and do not move towards each other is due to the force of gravity. Gravity is a force that attracts objects towards each other, and the strength of this force depends on the mass of the objects involved. In this case, the large ball has a greater mass than the small ball, and the small ball has a greater mass than the feather.

According to Newton's law of universal gravitation, the force of gravity between two objects is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers. Since the distance between the objects is large compared to their sizes, the gravitational force between them is negligible.

Therefore, the objects fall towards Earth because the strength of Earth's gravitational force is much greater than the gravitational force between the objects themselves. The large ball experiences a stronger gravitational force due to its larger mass, resulting in a faster fall compared to the small ball and feather.

https://brainly.com/question/31888636

#SPJ2

Aluminum (Al) allows an electric current to flow through it easily. The correct option is B.

Electricity is the flow of electric charge through a conductor. The ability of a material to allow electric current to flow through it depends on its electrical conductivity. Materials with high electrical conductivity allow electric current to flow through them easily, while materials with low electrical conductivity resist the flow of electric current.

Here in the Question,

Option A: Glass is a poor conductor of electricity and has very low electrical conductivity. It is an insulator and does not allow electric current to flow through it easily.

Option B: Aluminum is a good conductor of electricity and has high electrical conductivity. It allows electric current to flow through it easily.

Option C: Rubber is an insulator and has very low electrical conductivity. It does not allow electric current to flow through it easily.

Option D: Carbon is a poor conductor of electricity and has low electrical conductivity. While some forms of carbon, like graphite, have a relatively high electrical conductivity, it is still much lower than that of aluminum. So, carbon does not allow electric current to flow through it easily.

Therefore, among the given options, only aluminum (option B) would allow an electric current to flow through it easily because it is a good conductor of electricity.

To learn about Ohm's law click:

https://brainly.com/question/1247379

#SPJ2

Total heat transfer while the tank is being filled in this manner, Q = ΔH = mCpΔT = 88,147 kJ

Ideal gas law states that pressure, volume, and temperature of gas are directly proportional to each other, as long as number of particles and mass of gas remain constant.

PV = nRT

P is pressure, V is volume, n is number of moles of gas, R is gas constant, and T is temperature.

V = nRT/P

n = PV/RT

n = (1650 kPa)(100 m3)/(0.287 kPa·m3/kg·K)(288 K) = 603.5 kg

V = nRT/P = (603.5 kg)(0.287 kPa·m3/kg·K)(293 K)/(1650 kPa) = 105.5 m3

m = nM = (603.5 kg)(28.97 kg/kmol) = 17,486 kg

Q = ΔH = mCpΔT

ΔH is change in enthalpy, m is mass of air, Cp is specific heat at constant pressure, and ΔT is change in temperature.

ΔH = CpΔT

Q = ΔH = mCpΔT = (17,486 kg)(1.005 kJ/kg·K)(5 K) = 88,147 kJ

To know more about ideal gas law, refer

https://brainly.com/question/27870704

#SPJ1

(a) The potential energy of the rock relative to the base of the cliff can be calculated using the formula for gravitational potential energy:

PE = mgh

where m is the mass of the rock (24.0 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the height of the cliff (80.0 m).

PE = 24.0 kg * 9.8 m/s^2 * 80.0 m = 15,360 J

(b) The kinetic energy of the rock just before it strikes the ground can be calculated using the formula for kinetic energy:

KE = 0.5 * m * v^2

where m is the mass of the rock (24.0 kg) and v is the velocity of the rock just before it strikes the ground. The velocity can be calculated using the equation of motion for a freely falling object:

v = sqrt(2gh)

v = sqrt(2 * 9.8 m/s^2 * 80.0 m) = 44.72 m/s

KE = 0.5 * 24.0 kg * 44.72 m/s^2 = 507.84 J

(a) The force is 12 N. (b) The normal force between the block and incline is  46.2 N. (c) The force of friction on the block is 12 N.

We can solve this problem using Newton's laws of motion and the equations of motion for objects on inclined planes.

(a) To find the force applied to the block, we can use the equation:

[tex]F_a_p_p_l_i_e_d = m * a[/tex]

here,[tex]F_a_p_p_l_i_e_d[/tex] is applied force,

m is mass of the block, and

a is acceleration of the block.

Reserving values:-

[tex]F_a_p_p_l_i_e_d = (5.2 kg) * (2.3 m/s^2) = 12 N[/tex]

Therefore, the force applied on block is 12 N.

(b) To find the normal force between the block and the incline, we can use the component of the force of gravity that is perpendicular to the incline:-

[tex]F_n_o_r_m = m * g * cos\theta[/tex]

here,

m is mass of the block,

g is acceleration due to gravity, and

theta is angle of the incline.

Reserving values:-

[tex]F_n_o_r_m = (5.2 kg) * (9.81 m/s^2) * cos25.0 = 46.2 N[/tex]

Therefore, the normal force between the block and the incline is about 46.2 N.

(c) To find the force of friction on the block, we need to compare the applied force to the maximum frictional force that the surface can provide, which is given by:

[tex]F_f_r_i_c_t_i_o_n_,_m_a_x = mu * F_n_o_r_m[/tex]

here, mu is coefficient of friction and

[tex]F_n_o_r_m[/tex] is normal force.

The force of friction acts in the opposite direction to the motion of the block, so it will be downhill in this case. If the block is moving uphill, then the force of friction would be uphill instead.

Reserving values:-

[tex]F_f_r_i_c_t_i_o_n_,_m_a_x = (0.26) * (46.2 N) = 12.0 N[/tex]

Since the applied force of 12 N is equal to the maximum frictional force, the block will slide with a constant velocity. Therefore, the force of friction on the block is 12 N.

To know more about force please refer: https://brainly.com/question/13191643

#SPJ4

Plot the I-V characteristic of the component on a graph with current (I) on the y-axis and voltage (V) on the x-axis.

What is Resistance?

Resistance is a property of a material or component that opposes the flow of electric current through it. It is measured in units of ohms (Ω) and is represented by the symbol R. Resistance is a fundamental property of electric circuits, and it is determined by the geometry, composition, and temperature of the material or component.

To use the I-V characteristic of a component to find its resistance at a particular voltage, we can follow these steps:

Identify the region of the graph that corresponds to the voltage at which we want to find the resistance.

Choose two points on the I-V characteristic in this region, and calculate the change in voltage (ΔV) and the change in current (ΔI) between these two points.

Calculate the resistance of the component using the formula R = ΔV / ΔI.

Repeat this process at different voltages to determine how the resistance of the component varies with voltage.

It is important to note that the resistance of some components, such as diodes and transistors, can vary significantly with voltage and temperature. In these cases, the I-V characteristic may not be linear, and the resistance may need to be calculated using more advanced techniques such as curve fitting or numerical analysis.

Learn more about I-V characteristic from given link

https://brainly.com/question/29581750

#SPJ1

The force exerted by the truck on the trailer is approximately 2951.6 N.

To find the force exerted by the truck on the trailer, we can use Newton's second law of motion, which states that the net force acting on an object is equal to its mass times its acceleration. The net force in this case is the force exerted by the truck on the trailer, and we can express this as:

F = [tex]m_{total}[/tex] × a

where F is the net force, [tex]m_{total}[/tex] is the total mass of the truck and trailer, and a is the acceleration.

Substituting the given values, we get:

F = (1800 kg + 620 kg) × 1.16 m/s^2

Simplifying, we get:

F = 2951.6 N

To know more about force here

https://brainly.com/question/28875770

#SPJ4

Answer:

3

Explanation:

When the projectile reaches a vertical velocity of zero, this is the maximum height of the projectile and then gravity will take over and accelerate the object downward. The horizontal displacement of the projectile is called the range of the projectile, and depends on the initial velocity of the object.

Answer: A. Light always travels in a straight line.

Explanation: Light follows rectilinear motion. Rectilinear motion is also known as linear motion. For example; the motion of a bullet fired from a gun, a ray of the torch.

Light always travels in a straight line. It is considered to travel from one point to another in a straight line joining them. The path of light is called a ray of light.

To learn more about light:

https://brainly.com/question/104425

The distance between the two charges is approximately 0.0134 meters.

The Coulomb force between two point charges is given by Coulomb's Law,

[tex]F = \dfrac{k Q_1 Q_2}{r^2}[/tex]

where k is Coulomb's constant, Q1 and Q2 are the magnitudes of the two charges, and r is the distance between them.

Q1 = +8 x 10^-6C, Q2 = -5 x 10^-6C, and F = 0.2 N.

k = 9 x 10^9 N m^2/C^2.

Substituting these values into Coulomb's Law,

[tex]0.2 N = \dfrac{9 \times 10^9 \times 8 \times 10^{-6} \times -5 \times 10^{-6}}{ r^2}[/tex]

Multiplying both sides by r^2, we get:

r^2 = (3.6 x 10^-5 N) / 0.2

r^2 = 1.8 x 10^-4 m^2

r ≈ 0.0134 m

To know more about the Coulomb's Law, here

brainly.com/question/1616890

#SPJ4

Friction force Force that resists the slidihng or rolliong of one side object over another. As both the players pull with the same force therefore each player pull to drag the coach with force of 520.83

What is Friction?

Friction force on the given sled is 1000 N.

Angle between the two ropes dragging by the players is 50 Celcius.

Friction force Force that resists the slidihng or rolliong of one side object over another.

Let, f be the force applied by each player Pull force applied by the player one is equal to the pull force applied by the player two. Therefore the angle created between the ropes dragged by both the player will be equal and half of the given angle.

Angle created by each player with sled is, To keep this sled in  dynamic equilibrium the force applied by both the player must be equal to the friction force on the sled in opposite direction.

Therefore, Hence, each player pull to drag the coach with force of 520.83.

To learn more about friction, refer to the link:

https://brainly.com/question/13000653

#SPJ1

The energy stored in the camera flash is 28.44J.

The potential energy is a form of energy and the potential (and therefore voltage, when differences are taken) is defined as the potential energy (or potential energy difference) per unit charge.

The equation that relates the potential difference to energy is as follows:

V = E/Q

Where;

E = 474V × 0.06C

E = 28.44J

Learn more about energy at: https://brainly.com/question/10427150

#SPJ1

A light wave has a frequency of 5.4 x 10⁻¹⁴cycles per second and a wavelength of 5.5 x 10⁻¹⁷ meter so the speed of the wave is 29.7 x 10⁻³m/s.

v=λf, or velocity = wavelength x frequency, can be used to calculate a wave's speed. The distance a wave covers in a certain amount of time, such as the number of meters it covers every second, is known as its wave speed.

The formulae of the speed of the wave are,

v=λf, or velocity = wavelength x frequency

Frequency = 5.4 x 10⁻¹⁴ hertz

Wavelength = 5.5 x 10⁻¹⁷ m

v =  5.5 x 10⁻¹⁷x  5.4 x 10⁻¹⁴

 =    29.7 x 10⁻³ m/s

Therefore,  the speed of the wave is 29.7 x 10⁻³m/s.

Learn more about light, here:

https://brainly.com/question/2660739

#SPJ9

The car will move at a constant speed once it is unleashed, as is assumed. Hence, there is no acceleration. Newton's second law states that a straight line along zero will appear on the graph if F=ma=m(0)=0, F=0.

Acceleration is the rate at which an object changes its velocity. It is a vector quantity, which means it has both magnitude and direction. The standard unit of acceleration is meters per second squared (m/s²).

Acceleration can be caused by forces such as gravity, friction, and electromagnetism. When a force acts on an object, it causes a change in the object's motion, resulting in acceleration.

The relationship between acceleration, velocity, and time is described by the equation a = (v_f - v_i) / t, where a is acceleration, v_f is final velocity, v_i is initial velocity, and t is time.

The effects of acceleration can be seen in everyday experiences, such as feeling pushed back into your seat when a car accelerates or feeling weightless during freefall. Understanding acceleration is important in fields such as physics, engineering, and transportation.

Learn more about Acceleration here:

https://brainly.com/question/20689578

#SPJ4

The final velocity of the green ball is 5.0 m/s.

The final speed of the green ball can be determined using the law of conservation of momentum.

The momentum of the system (red and green ball) before the collision is equal to the momentum of the system after the collision, assuming there are no external forces acting on the system.

Before the collision, the momentum of the red ball is given by:

p1 = m1v1 = 0.50 kg   x 10 m/s = 5.0 kg m/s

After the collision, the momentum of the green ball is given by:

p2 = m2  x v2

Using the law of conservation of momentum, we have:

p1 + p2 = (m1 + m2) v1

5.0 kg m/s + p2 = (0.50 kg + 0.50 kg) x 10 m/s

5.0 kg m/s + p2 = 1.0 kg * 10 m/s

5.0 kg m/s + p2 = 10.0 kg m/s

p2 = 10.0 kg m/s - 5.0 kg m/s = 5.0 kg m/s

Learn more about final speed here: https://brainly.com/question/25905661

#SPJ1

The time period of wave  with a frequency of 6kHz was found to oscillate 24 000 times is 4s.

Given the frequency of wave (f) = 6kHz

Number of times the wave oscillates (n) = 24000

Let the time period = T

The time period frequency is inversely related to the number of oscillations. As the time period frequency increases, the number of oscillations decreases, and vice versa. The frequency of an event is the number of times it occurs in a unit of time. To be clear, it is separate from angular frequency and is occasionally referred to as temporal frequency. An event takes place once every second, or once every hertz (Hz), or frequency unit. Then, T = n/f such that:

T = 24000/(6 x 10^3) = 4s

To learn more about frequency click here https://brainly.com/question/22548127

#SPJ4

The arc length of one slice of pie is either 5.24 inches for 6 slices or 3.93 inches for 8 slices.

The arc length of one slice of pie can be found by dividing the circumference of the pie by the number of slices it is cut into.

The circumference of the pie can be found using the formula

C = πd

Where d is the diameter of the pie.

Substituting d = 10 inches,

we get:

C = π × 10 inches ≈ 31.42 inches

If we assume that the pie is cut into n equal slices, then the arc length of one slice is approximately:

Arc length ≈ C/n

If we want an approximate value for the arc length, we can use a value of n that is easy to work with,

such as n = 6 for 6 slices or n = 8 for 8 slices.

For n = 6, the arc length of one slice is approximately:

Arc length ≈ 31.42 inches / 6 ≈ 5.24 inches

For n = 8, the arc length of one slice is approximately:

Arc length ≈ 31.42 inches / 8 ≈ 3.93 inches

Therefore, the approximate arc length of one slice of pie is either 5.24 inches for 6 slices or 3.93 inches for 8 slices.

For a similar questions on arc length,

https://brainly.com/question/28108430

#SPJ4

Answer:

A) Electric flux depends on the charge Q within and enclosed surface regardless of the shape of the surface - this concept is particularly useful for symmetric surfaces (centralized charge within a sphere) - field outside a uniform cylinder - whenever charges are symmetric with respect to the external environment.

B) Since the gravitational field has the same form as the electric field -           F = G M1 M2 / R^2 the same arguments apply to the gravitational field - Field lines passing out thru an enclosed surface are sources of field whereas field lines passing inward thru an enclosed surface are sinks for the field

Your weight at the top of the ladder would be one-quarter of its normal value. The correct option is C.

The gravitational pull of the Earth, denoted by g, is the net acceleration imparted to objects by the combined effect of gravitation and centrifugal force. It is a vector quantity whose direction corresponds to a plumb bob and whose strength or magnitude is determined by the norm.

The formula for gravity is,

g = GM / R²

g = 1 / R²

gt = 1 / (2R)²

gt / g = R² / 4R²

gt = 1 / 4g

Therefore, at the top of the ladder, your weight would be one-quarter of its normal value.

To know more about gravity follow

https://brainly.com/question/14286635

#SPJ1

Gulls are often observed dropping clams . When it hits the rocks, the shell is traveling at approximately 22.3 m/s.

The following equation for motion with constant acceleration caused by gravity can be used to determine the shell's velocity when it hits the rocks:

where v = v₀ + a × t

v is the shell's final velocity when it hits the rocks; v₀ is its initial velocity, which is 0 m/s since it was dropped from rest; a is the acceleration caused by gravity (9.8 m/s²); and t is the time it takes for the shell to fall to the rocks. We can use the vertical displacement equation to determine the time t.

y = v₀ × t + (1/2) × a × t²

17 m = 0 m/s × t + (1/2) × 9.8 m/s² × t²

17 m = 4.9 m/s² × t²

t = √(17 m / 4.9 m/s²)

t = 2.28 s

Now that we have the time t, we can substitute it back into the equation for velocity:

v = v₀ + a × t

v = 0 m/s + 9.8 m/s² × 2.28 s

v = 22.3 m/s

Learn more about velocity:

brainly.com/question/29523095

#SPJ1

Evan's kinetic energy during the trial was [tex]295.99 kg m^2/s^2.[/tex]

Energy is defined as the capacity for doing work. It is the ability to cause change or to make things happen. It exists in many forms and can be derived from various sources such as the sun, wind, water, and even nuclear power. Energy can be transformed from one form to another, such as when electricity is generated from the sun or when mechanical energy is converted into electrical energy. Energy can also be stored in batteries, stored in the form of potential or kinetic energy, or even converted into thermal energy.

Kinetic energy (KE) is the energy an object has due to its motion. It is calculated using the equation [tex]KE = 1/2 mv^2[/tex], where m is the mass of the object and v is its velocity.

In Evan's case, his mass is 58.6 kg and his velocity is 10.1 m/s. Therefore, his kinetic energy during the trial can be calculated as follows:

[tex]KE = 1/2 * 58.6 kg * (10.1 m/s)^2KE = 295.99 kg m^2/s^2[/tex]

Therefore, Evan's kinetic energy during the trial was [tex]295.99 kg m^2/s^2.[/tex]

To learn more about energy visit

brainly.com/question/13881533

#SPJ1

The volume of water from the volume of oil, which yields V_diff = 50,000 cm³ - 6.283 cm³ = 49

Yield is a measure of the return on an investment. It is typically expressed as a percentage of the initial investment and is calculated by dividing the annual income generated by an investment by the initial cost of the investment.

The difference in height between the two arms after the fluid comes to rest can be determined using the equation for the volume of a cylinder, which is V=πr²h, where r is the radius of the cylinder and h is the height. Since we know the volume of water and oil that was added to one arm, we can calculate the difference in height.
First we need to calculate the volume of water in one arm. Since we know the radius is 1 cm and the height is half of the U-shaped monometer (2 cm), the volume of water in one arm is V_water = πr²h = π(1 cm)²(2 cm) = 6.283 cm³.
Next we need to calculate the volume of oil. Since we know the volume of oil is 50 ml, we can convert this to cm³ by multiplying it by 1000. This gives us the volume V_oil = 50 ml x 1000 = 50,000 cm³.
Now we can calculate the difference in height between the two arms by subtracting the volume of water from the volume of oil, which yields V_diff = 50,000 cm³ - 6.283 cm³ = 49

To learn more about yield
https://brainly.com/question/30592929
#SPJ1

It takes approximately 9.24 seconds to reach 2% of the original speed.

We can use the equation for velocity with a drag force to solve for the time it takes to reach 2% of the original speed:

[tex]v = v0 e^(-b/m)t + (mg/b)(1 - e^(-b/m)t)[/tex]

where:

v is the velocity at time t

v0 is the initial velocity

b is the drag coefficient

m is the mass of the object

g is the acceleration due to gravity

At 2% of the original speed, the velocity is 0.02 x 6.5 m/s = 0.13 m/s.

Substituting the given values, we have:

[tex]0.13 m/s = 6.5 m/s * e^(-1.10x10^4 kg/s * t/70 kg) + (70 kg * 9.81 m/s^2 / 1.10x10^4 kg/s) * (1 - e^(-1.10x10^4 kg/s * t/70 kg))[/tex]

Simplifying and solving for t using numerical methods, we get:

t ≈ 9.24 seconds

Therefore, it takes approximately 9.24 seconds to reach 2% of the original speed.

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ1

The type of image produced by the converging lens when object O is at that position will be virtual and enlarged, Option D.

A virtual image is an image that is formed when light rays do not actually converge at a single point, but instead appear to converge when they are extended backwards. A virtual image is typically created by objects that are behind a lens or mirror that diverts the light rays in such a way that they appear to come from a different location.

An enlarged image, on the other hand, refers to a visual representation that has been magnified or made larger than the original size of the object being viewed.

Learn more on virtual and enlarged image here: https://brainly.com/question/15553241

#SPJ1

This indicates that to increase the temperature of the water in the bathtub from 2°C to 7°C, roughly 62,760 kJ of heat energy were added.

While scientists typically use the Centigrade (or Celsius) scale, where water freezes at 0 degrees and boils at 100 degrees, we typically measure temperature in the United States using the Fahrenheit scale, where water freezes at 32 degrees and boils at 212 degrees.

According to the data given, the bathtub once held 300 kg of water at 2°C.

we can use the specific heat capacity of water and the formula:

Q = m * c * ΔT

The specific heat capacity of water is 4.184 J/(g°C), or 4184 J/(kg°C). Therefore, the amount of heat energy absorbed by the water is:

Q = 300 kg * 4184 J/(kg°C) * (7°C - 2°C)

Q = 62,760 kJ

To know more about specific heat visit:-

https://brainly.com/question/28852989

#SPJ1

Answer: plastic

Explanation: