At a sales level of $15,000, the two options yield the same salary.
To find the sales level at which the two options yield the same salary, we need to set the two salaries equal to each other and solve for sales:
2500 + 0.09x = 3100 + 0.05x
where x is the sales level.
Simplifying this equation, we get:
0.04x = 600
x = 15000
If the sales are less than $15,000, the first option with a lower base salary but a higher commission rate would be more favorable, while if sales exceed $15,000, the second option with a higher base salary but a lower commission rate would be more favorable.
It's worth noting that the decision between the two options depends on more than just the sales level. Other factors, such as the type of work, job security, and benefits, should also be considered when making a decision.
To learn more about salary here:
https://brainly.com/question/29126949
#SPJ1
During a construction project, heavy rain filled construction cones with water. The diameter of a cone is 11 in. and the height is 26 in. What is the volume of the water that filled one cone? Round your answer to the nearest hundredth. Enter your answer as a decimal in the box. Use 3.14 for pi. in³
Answer:
Step-by-step explanation:
volume of cone =(1/3)*3.14*r^2h
radius of cone=(11/2)=5.5in
height (h)=26in
volume=826.62in³
a bag contains 10 beads -- 2 black, 3 white, and 5 red. a bead is selected at random. the probability of selecting a white bead, replacing it, and then selecting a red bead is blank 1 0.15 . this is a blank 2 dependent event.
The probability of selecting a white bead, replacing it, and then selecting a red bead is 0.15 and this is an independent event.
To fill in the blanks:
1)The probability of selecting a white bead, replacing it, and then selecting a red bead is:
P(white, then red) = P(white) * P(red | white) = (3/10) * (5/10) = 0.15
Here, P(white) is the probability of selecting a white bead on the first draw, which is 3/10
And P(red | white) is the probability of selecting a red bead on the second draw, given that a white bead was selected on the first draw.
Since the first bead is replaced before the second draw, the probability of selecting a red bead on the second draw is still 5/10.
2)This is an independent event.
This is because the first draw does not affect the probability of the second draw, since the bead is replaced.
To learn more about probability visit:
brainly.com/question/4152354
#SPJ4
use spherical coordinates to find the center of mass of the solid of uniform density.hemispherical solid of radius r
The coordinates of the centre of mass are:
[tex]x = \frac{M_x}{M} = \frac{r}{2}\\y = \frac{M_y}{M} = \frac{r}{2}\\z = \frac{M_z}{M} = \frac{r}{2}[/tex]
To find the centre of mass of a solid of uniform density, we need to calculate the triple integral of the position vector (x, y, z) over the volume of the solid, and divide by the total mass of the solid.
In this case, the solid is a hemispherical shell of radius r and uniform density, so we can use spherical coordinates to simplify the calculations.
0 ≤ θ ≤ π/2
0 ≤ φ ≤ 2π
The mass of the solid is proportional to its volume, so we can assume that the total mass is [tex]M = \frac{2\pi r^3}{3}[/tex] (the mass of a full sphere of radius r, divided by 2).
To calculate the triple integral for the centre of mass, we need to compute the following integrals:
[tex]M_x = \iiint x \rho \, dV\\M_y = \iiint y \rho \, dV\\M_z = \iiint z \rho \, dV[/tex]
We can simplify the integrals using spherical coordinates:
[tex]\int_0^R \int_0^{\frac{\pi}{2}} \int_0^{2\pi} (r \sin\theta \cos\phi) \rho r^2 \sin\theta \, d\phi \, d\theta \, dr[/tex]
[tex]\int_0^R \int_0^{\frac{\pi}{2}} \int_0^{2\pi} (r \sin{\theta} \sin{\phi}) \rho r^2 \sin{\theta} \, \mathrm{d}\phi \, \mathrm{d}\theta \, \mathrm{d}r[/tex]
[tex]\int_0^R \int_0^{\frac{\pi}{2}} \int_0^{2\pi} (r \cos \theta) \rho r^2 \sin \theta \,d\phi \,d\theta \,dr[/tex]
Since the density is uniform, we can factor it out of the integrals:
[tex]M_x = \rho \int_0^R \int_0^{\frac{\pi}{2}} \int_0^{2\pi} (r^3 \sin^2 \theta \cos \phi) \, d\phi \,d\theta \,dr M_y = \rho \int_0^R \int_0^{\frac{\pi}{2}} \int_0^{2\pi} (r^3 \sin^2 \theta \sin \phi) \,d\phi \,d\theta \,dr M_z = \rho \int_0^R \int_0^{\frac{\pi}{2}} \int_0^{2\pi} (r^3 \cos \theta \sin \theta) \,d\phi \,d\theta \,dr[/tex]
The integrals over φ and θ can be evaluated using the standard formulas for integrating trigonometric functions over a range of angles:
[tex]\int_0^{2\pi}\cos\phi\, d\phi = \int_0^{2\pi}\sin\phi\, d\phi = 0\\\int_0^{\frac{\pi}{2}}\cos\theta \sin\theta\,d\theta = \frac{1}{2}\\x = \frac{M_x}{M} = \frac{r}{2}\\y = \frac{M_y}{M} = \frac{r}{2}\\z = \frac{M_z}{M} = \frac{r}{2}[/tex]
To know more about the coordinates visit:
https://brainly.com/question/10085860
#SPJ4
can someone help explain please??
The zeroes of the function that models the height of a ball after it is thrown are t = 1 and t = - 1 / 2.
What do zeros say of a function ?We are given h ( t ) = ( 1 - t ) ( 8 + 16 t)
We can find the zeros by setting them to zero :
( 1 - t ) = 0
t = 1
( 8 + 16 t ) = 0
16 t = - 8
t = - 8 / 16
t = -1 / 2
The zeroes signify moments when the ball's height is at or below ground level. Solely one zero possesses significance in a physical sense since negative time lacks relation to reality, t = 1 marking the point at which the ball arrives at the ground, denoting a period spanning only one second.
Find out more on zeros at https://brainly.com/question/14074587
#SPJ1
Please help I’ll give brainliest!!
Answer:
The real solutions are:
x = -5, -3, 4, 8
When talking about a scale drawing or model, _____________ is determined by the ratio of a given length on the drawing or model to its corresponding length on the actual object. How do we write this as a fraction?
When talking about a scale drawing or model, the scale factor is determined by the ratio of a given length on the drawing or model to its corresponding length on the actual object.
This can be written as a fraction, with the length on the drawing or model as the numerator and the corresponding length on the actual object as the denominator. For example, if a drawing of a building has a scale factor of 1:100 and the length of a wall on the drawing is 5 cm, the corresponding length on the actual building would be 500 cm (5 cm x 100). Therefore, the scale factor can be written as 5/500 or simplified to 1/100.
When talking about a scale drawing or model, the term you're looking for is "scale factor." It is determined by the ratio of a given length on the drawing or model to its corresponding length on the actual object. To write this as a fraction, you would place the length on the drawing or model as the numerator and the corresponding length on the actual object as the denominator. For example, if the scale factor is 1:10, you would write it as 1/10.
Visit here to learn more about fraction : https://brainly.com/question/10354322
#SPJ11
Please help!!!! I need this answer before It's due!
Answer: 38 3/4 or 38.75
Step-by-step explanation:
multiply 3 1/2 * 5 = 17 1/2
multiply 4 1/4 * 5 = 21 1/4
add the 2
=38 3/4
Which equation can be used to solve for
�
xx in the following diagram?
Choose 1 answer:
Choose 1 answer:
(Choice A)
150
−
10
�
=
90
150−10x=90150, minus, 10, x, equals, 90
A
150
−
10
�
=
90
150−10x=90150, minus, 10, x, equals, 90
(Choice B)
10
�
+
150
=
180
10x+150=18010, x, plus, 150, equals, 180
B
10
�
+
150
=
180
10x+150=18010, x, plus, 150, equals, 180
(Choice C)
10
�
=
150
10x=15010, x, equals, 150
C
10
�
=
150
10x=15010, x, equals, 150
(Choice D)
10
�
+
90
=
180
10x+90=18010, x, plus, 90, equals, 180
D
10
�
+
90
=
180
10x+90=180
An equation can be used to solve for x in the following diagram:
x + (4x - 85) = 90
The correct answer is an option (A)
From the attached figure we can observe that the right angle is divided into two angles i.e., angle x degree and angle (4x - 85) degrees
We know that the two angles are called complementary angles when the sum of their is equal to 90 degrees.
We can observe that angle x degree and angle (4x - 85) degrees are complementary angles.
This means that the sum of these angles must be 90 degrees.
x + (4x - 85) = 90
this is the required equation.
Thus, the correct answer is an option (A)
Learn more about an equation here:
https://brainly.com/question/28243079
#SPJ1
Find the complete question below.
Identify the type I error and the type II error that correspond to the given hypothesis.
The percentage of households with Internet access is greater than 60 %.
Answer: Type I error and Type II error are associated with hypothesis testing, where we test a hypothesis by collecting data and analyzing it.
For the given hypothesis, we can set up the null hypothesis as follows:
H0: The percentage of households with Internet access is less than or equal to 60%.
And the alternative hypothesis as:
Ha: The percentage of households with Internet access is greater than 60%.
Now, a Type I error occurs when we reject the null hypothesis (i.e., conclude that the percentage of households with Internet access is greater than 60%) when it is actually true. This means that we would be making a false claim that the percentage of households with Internet access is greater than 60%, when it is not.
On the other hand, a Type II error occurs when we fail to reject the null hypothesis (i.e., conclude that the percentage of households with Internet access is less than or equal to 60%) when it is actually false. This means that we would be missing the truth that the percentage of households with Internet access is greater than 60%.
So, in the context of the given hypothesis, a Type I error would be to conclude that the percentage of households with Internet access is greater than 60% when it is actually less than or equal to 60%, and a Type II error would be to fail to conclude that the percentage of households with Internet access is greater than 60% when it is actually greater than 60%.
let x and y be the random variables that count the number of heads and the number of tails that come up when two fair coins are flipped. show that x and y are not independent.
There is no outcome that satisfies this condition, while the product of the marginal probabilities is 4/16=1/4. Therefore, we conclude that x and y are not independent.
What is probability?
Probability is a measure of the likelihood of an event occurring. It is a numerical value between 0 and 1 (inclusive), where 0 represents an impossible event and 1 represents a certain event.
To show that x and y are not independent, we need to demonstrate that the joint probability distribution of x and y does not factor into the product of their marginal distributions.
The possible outcomes when two coins are flipped are:
HH
HT
TH
TT
Since the coins are fair, each of these outcomes has probability 1/4. We can define the random variables x and y as follows:
x is the number of heads, which can take on the values 0 or 1 or 2.
y is the number of tails, which can also take on the values 0 or 1 or 2.
The joint probability distribution of x and y can be represented by a 3x3 matrix:
[tex]\left[\begin{array}{ccc}1&0&0\\0&2&0\\0&0&1\end{array}\right][/tex]
The (i, j) entry of this matrix represents the probability that x=i and y=j. For example, the probability that x=1 and y=2 is 0, since there is only one outcome (HT) that satisfies this condition and its probability is 1/4.
The marginal distribution of x is obtained by summing the entries of each row:
x | 0 1 2
--|-----
p | 1 2 1
Similarly, the marginal distribution of y is obtained by summing the entries of each column:
y | 0 1 2
--|-----
p | 1 2 1
If x and y were independent, then the joint probability distribution would factor into the product of the marginal distributions:
[tex]\left[\begin{array}{ccc}p&p&p\\p&p&p\\p&p&p\end{array}\right][/tex]
However, this is not the case, as can be seen by comparing the joint probability distribution with the product of the marginal distributions. For example, the probability that x=1 and y=1 is 0, since there is no outcome that satisfies this condition, while the product of the marginal probabilities is 4/16=1/4.
Therefore, we conclude that x and y are not independent.
To learn more about probability visit:
https://brainly.com/question/23417919
#SPJ4
Find the indicated side of the triangle.
Answer:
a = 6
Step-by-step explanation:
using the sine ratio in the right triangle
sin30° = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{a}{12}[/tex] ( multiply both sides by 12 )
12 × sin30° = a
12 × 0.5 = a , then
a = 6
Identify the test statistic for this hypothesis test.The test statistic for this hypothesis test is(Round to two decimal places as needed.)Identify the P-value for this hypothesis test.The P-value for this hypothesis test is(Round to three decimal places as needed.)Identify the conclusion for this hypothesis test.A.Reject Upper H 0. There is not sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.B.Fail to reject Upper H 0. There is sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.C.Fail to reject Upper H 0. There is not sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.D.Reject Upper H 0. There is sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.
A. Reject Upper H0. There is not sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.
B. Fail to reject Upper H0. There is sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.
C. Fail to reject Upper H0. There is not sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.
D. Reject Upper H0. There is sufficient evidence to warrant support of the claim that more than 20% of users develop nausea.
The test statistic for this hypothesis test is the difference between the sample proportion and the hypothesized proportion. In this case, the hypothesis is that more than 20% of users develop nausea, and the sample proportion is the proportion of users who reported nausea in the sample.
Learn more about nausea.
https://brainly.com/question/8171653
#SPJ4
Multiply. (−0. 64)(−2. 5) Enter your answer as a decimal in the box
The product of the numbers (−0. 64) and (−2. 5) is
1.6.
How to multiply the given numbersTo multiply (-0.64)(-2.5), we can accomplish the task using the following steps:
Multiply the absolute values of the numbers:
0.64 x 2.5 = 1.6
Determine the sign of the product: Since we are multiplying two negative numbers, the product is positive.
Add the sign to the product: (-0.64)(-2.5) = 1.6
hence, (-0.64) x (-2.5) = 1.6.
These can also be solved using calculator
Learn more about multiply at
https://brainly.com/question/28768606
#SPJ4
Suppose the following set of random numbers is being used to simulate the
event of a basketball player making two free throws in a row. How should the
numbers be rearranged?
502666 346453 524366 387026 704473 775061 350054 771009
621563 762199
A. 502 666 346 453 524 366 387 026 704 473 775 061 350 054 771
009 621 563 762 199
B. 50 26 66 34 64 53 52 43 66 38 70 26 70 44 73 77 50 61 35 00 54
77 10 09 62 15 63 76 21 99
C. 5026 6634 6453 5243 6638 7026 7044 7377 5061 3500 5477
1009 6215 6376 2199
D. 50266 63464 53524 36638 70267 04473 77506 13500 54771
00962 15637 62199
The correct rearrangement is: 5026 6634 6453 5243 6638 7026 7044 7377 5061 3500 5477 1009 6215 6376 2199. The Option C is correct.
How to rearrange a set of random numbers?Rearrangement means the action or process of changing the position, time or order of something or number in this context.
To rearrange the set of numbers, we can choose a method such as sorting them in ascending or descending order or grouping them in pairs.
The correct option is C. 5026 6634 6453 5243 6638 7026 7044 7377 5061 3500 5477 1009 6215 6376 2199. This option groups the numbers in pairs which is suitable for simulating two free throws in a row.
Read more about rearrangement
brainly.com/question/30288664
#SPJ1
0 1 2 3 4.10 .20 .50 .15 0.05What is the probability that at least 1 student comes to office hours on Wednesday?
The probability that at least 1 student comes is therefore 1 - 0.05 = 0.95. So the probability that at least 1 student comes is 1.00 - 0.05 = 0.95.
To calculate the probability that at least 1 student comes to office hours on Wednesday, we need to add up the probabilities of all the possible scenarios in which at least 1 student comes.
First, we can calculate the probability that no student comes, which is given by the last number in the list, 0.05.
The probability that at least 1 student comes is therefore 1 - 0.05 = 0.95.
Alternatively, we could add up the probabilities of all the scenarios where at least 1 student comes, which are given by the first 9 numbers in the list:
0.00 + 0.10 + 0.20 + 0.50 + 0.15 + 0.05 + 0.00 + 0.00 + 0.00 = 1.00
So the probability that at least 1 student comes is 1.00 - 0.05 = 0.95.
Visit here to learn more about probability : https://brainly.com/question/30034780
#SPJ11
Okay so out of these estimated solutions which ones correct? PLEASE THIS IS MY FINAL HELP! 50 POINTS! THE IMAGE IS BELOW THIS!
Answer:
The answer is D!!!
Step-by-step explanation:
x=-7/5,=8/5 or (x=-1 2/5,y= 1 3/5) D one -7/5 = 1 2/5. 8/5 = 1 3/5
D IS THE CORRECT ANSWER
e. now say two robots are going to attempt the same task. the robots operate independently from one another. what is the probability that both robots succeed less than or equal to 80 times out of 100?
The probability of one robot succeeding in a task less than or equal to 80 times out of 100 can be calculated using a binomial distribution formula. Assuming the probability of success for one robot is p, the probability of success for both robots is p^2. Using the binomial distribution formula, we can calculate the probability of success for each robot and then multiply them together to find the probability of both robots succeeding less than or equal to 80 times out of 100. The formula is P(X<=80) = sum of P(X=k) from k=0 to k=80, where X is the number of successes in 100 attempts.
To calculate the probability of both robots succeeding less than or equal to 80 times out of 100, we need to first find the probability of success for one robot. Let's assume the probability of success for one robot is p = 0.7. The probability of success for both robots is then p^2 = 0.7^2 = 0.49.
Next, we need to use the binomial distribution formula to calculate the probability of success for each robot. The formula is P(X=k) = (n choose k) * p^k * (1-p)^(n-k), where n is the number of attempts, k is the number of successes, and (n choose k) is the binomial coefficient.
Using this formula, we can calculate the probability of one robot succeeding less than or equal to 80 times out of 100. P(X<=80) = sum of P(X=k) from k=0 to k=80 = sum of [(100 choose k) * 0.7^k * 0.3^(100-k)] from k=0 to k=80.
We can use a calculator or a software program like Excel to calculate this sum. The result is 0.9899, which means the probability of one robot succeeding less than or equal to 80 times out of 100 is almost 99%.
To find the probability of both robots succeeding less than or equal to 80 times out of 100, we just need to multiply the probability of one robot succeeding by itself: 0.9899 * 0.9899 = 0.9799. So the probability of both robots succeeding less than or equal to 80 times out of 100 is about 98%.
The probability of both robots succeeding less than or equal to 80 times out of 100 can be calculated using the binomial distribution formula. Assuming the probability of success for one robot is p, the probability of success for both robots is p^2. Using the formula P(X<=80) = sum of P(X=k) from k=0 to k=80, we can calculate the probability of one robot succeeding less than or equal to 80 times out of 100. Multiplying this probability by itself gives us the probability of both robots succeeding less than or equal to 80 times out of 100. For the given values, the probability is about 98%.
To know more about bionomial distribution visit:
https://brainly.com/question/9295333
#SPJ11
What does the distance value measure?
The term "distance" can refer to different types of measuring depending on the context. In general, distance is a numerical value that indicates the amount of separation between two objects or points in space.
In mathematics, distance usually refers to the length of a line segment connecting two points in a Euclidean space. The distance can be measured using various formulas, such as the Pythagorean theorem, which computes the length of the hypotenuse of a right triangle formed by the two points and the origin.
In physics, distance can refer to the separation between two objects in three-dimensional space, often measured in meters or kilometers.
In computer science and data analysis, distance can refer to a measure of similarity or dissimilarity between two objects or data points. For example, the Euclidean distance, Manhattan distance, or cosine distance can be used to quantify the difference between two vectors or sets of features.
In general, the meaning of the distance value depends on the specific context and the type of measurement being used.
To know more about Distance visit:
https://brainly.com/question/28551043
#SPJ4
In a company's survey of 500 employees, 25% said they go to the gym at least twice a week. The margin of error is ±2%. If the company has approximately 2,500 employees, what is the estimated maximum number of employees going to the gym at least twice a week?
Note that the estimated maximum number of employees going to the gym at least twice a week is 675.
How is this so?The sample size is 500 people, and 25% of them go to the gym at least twice a week, resulting in 0.25*500 = 125 employees.
Because the margin of error is 2%, the actual percentage of employees who go to the gym at least twice a week could range between 23% and 27%.
To compute the expected maximum number of workers who go to the gym at least twice a week, we may assume that all 2,500 employees have been polled and use the upper bound of the confidence interval
675 workers are equal to 0.27 x 2,500.
As a result, the maximum number of employees who go to the gym at least twice a week is 675.
Learn more about maximum number;
https://brainly.com/question/14702337
#SPJ1
the length of an arc of a circle is 27.1434 and the radius of the circle is 9 then the central angle is what percent of 2pi
Answer:
To find the central angle in radians, you can use the formula:
θ = s/r
where θ is the central angle in radians, s is the length of the arc, and r is the radius of the circle.
Substituting the given values, we get:
θ = 27.1434/9
θ = 3.01604 radians
To find the central angle as a percentage of 2π, we can use the formula:
θ/2π x 100%
Substituting the value of θ, we get:
(3.01604/2π) x 100%
≈ 48.04%
Therefore, the central angle is approximately 48.04% of 2π.
Step-by-step explanation:
Determine the total annual FICA tax for an annual salary of $38,480. (FICA is 7.65%) a. $294.37 b. $717.96 c. $2,385.76 d. $2,943.72 Please select the best answer from the choices provided A B C D
The total FICA tax amount on the annual salary of $38,480 is given by option d. $2,943.72
Annual salary is equals to $38,480.
FICA (Federal Insurance Contributions Act) tax includes two separate taxes.
Social Security tax and Medicare tax.
The Social Security tax rate is 6.2% and the Medicare tax rate is 1.45%, making the total FICA tax rate 7.65%.
To determine the total annual FICA tax for an annual salary of $38,480,
we need to multiply the salary by the FICA tax rate,
Total FICA tax = Annual salary × FICA tax rate
⇒ Total FICA tax = 0.0765 x $38,480
⇒ Total FICA tax = $2,943.72
Therefore, the total annual FICA tax is equal to option d) $2,943.72.
Learn more about FICA tax here
brainly.com/question/30845215
#SPJ4
What would a simple (1-for-1) substitution provide?
A simple (1-for-1) substitution would provide a direct replacement of one element or variable with another element or variable.
This can be useful in simplifying equations or formulas by replacing complex expressions with simpler ones. However, it may not always be applicable or accurate in more complex situations.
A simple 1-for-1 substitution provides a straightforward replacement of one element with another in a given context. This can be applied in various scenarios, such as replacing letters in cryptography, swapping ingredients in a recipe, or substituting variables in mathematical equations. The primary purpose of this substitution is to maintain the overall structure while changing a specific component.
Visit here to learn more about mathematical equations : https://brainly.com/question/29514785
#SPJ11
For a two-tailed test at 12. 66% significance level, the critical value of z is:.
The critical value of z for a two-tailed test at 12.66% significance level is approximately ±1.88.
For a two-tailed test at 12.66% significance level, we need to find the critical value of z. Here are the steps to find the critical value:
1. Since it is a two-tailed test, we need to divide the significance level by 2. This is because the rejection region is distributed equally in both tails of the distribution. So, 12.66% ÷ 2 = 6.33%.
2. Now, we need to convert the percentage to a decimal: 6.33% = 0.0633.
3. Next, we need to find the z-score that corresponds to the given probability (0.0633) in the standard normal distribution table. To do this, look for the closest probability value to 0.0633 in the body of the table.
4. After finding the closest probability value, locate the corresponding z-score. For a two-tailed test, you will have both a positive and negative z-score, which are symmetric around the mean (0).
After following these steps, you will find that the critical value of z for a two-tailed test at 12.66% significance level is approximately ±1.88.
to learn more about two-tailed test click here:
brainly.com/question/30115381
#SPJ11
Lin runs 10 laps around a track in 12 minutes. How many minutes per lap was that
?
Using the unitary method, we were able to determine that Lin ran each lap in 1.2 minutes, or 72 seconds.
To use the unitary method, we first need to determine the ratio between the number of laps and the time it took to run them. We can do this by dividing the total time by the number of laps:
Ratio = Total time / Number of laps
Ratio = 12 minutes / 10 laps
Ratio = 1.2 minutes per lap
Now we have the ratio between the time and the number of laps. We can use this ratio to find the time it took to run one lap by dividing the ratio by the number of laps:
Time per lap = Ratio / Number of laps
Time per lap = 1.2 minutes per lap / 1 lap
Time per lap = 1.2 minutes
Therefore, it took Lin 1.2 minutes, or 72 seconds, to run one lap around the track.
To know more about unitary method here
https://brainly.com/question/28276953
#SPJ4
a z-statistic reports how many sds an observed value is from the expected value, where the expected value is calculated using the
A z-statistic reports how many standard deviations an observed value is from the expected value, where the expected value is calculated using the population mean and standard deviation.
To calculate the z-statistic, use the following formula:
z = (x - μ) / (σ / √(n))Where:
x = the observed value
μ = the population mean
σ = the population standard deviation
n = the sample size
The z-statistic tells us how many standard deviations an observed value is from the expected value, which is the population mean. A positive z-score indicates that the observed value is above the expected value, while a negative z-score indicates that the observed value is below the expected value. A z-score of 0 indicates that the observed value is equal to the expected value. By calculating the z-statistic, we can determine how unusual or significant an observed value is relative to the population.
Learn more about Standard Deviation:
https://brainly.com/question/24298037
#SPJ4
Complete Question:
a z-statistic reports how many sds an observed value is from the expected value, where the expected value is calculated using the___.
NaCl crystals slip on {110}< 110 > slip systems. There are six possible systems of this type.
A. What are the exact slip plane and slip direction of the six possible systems?
B. Sketch the slip plane and slip direction of each system found in question A using standard cubic representations.
C. Consider a NaCl crystal subjected to uniaxial compression parallel to z = [110], on which of the {110}< 110 > slip systems would the shear stress be the highest? That is, on which of the systems would slip be expected? Give all active slip systems.
For a NaCl crystal has six slip systems,
A) The exact slip planes are [tex][\bar 1 1 0] [/tex], [tex][0 \bar1 1] [/tex], [tex][\bar 1 0 1] [/tex], [ 1 1 0], [0 1 1] and [ 1 0 1] and slip direction are (110), (011), ( 101) , [tex]( \bar 1 1 0) [/tex], [tex](0 \bar 11 ) [/tex] and [tex]( \bar1 0 1) [/tex] of te six systems.
B) The sketch of the slip plane and slip direction for each slip system is present in attached figure.
C) Slip systems (ii), (iii), (v) & (vi) are the suitable ones.
We have a NaCl crystals has slip on {110} < 110 > slip systems. Total number of possible systems = 6
The slip plane refers to the plane of maximum atomic density, and the slip direction is the closest folded direction in the slip plane.
A) For six possible systems, slip planes and slip directions are the following:
direction : (110)plane : [tex][\bar 1 1 0] [/tex].
Direction : (011)Plane : [tex][0 \bar1 1] [/tex]
Direction : ( 101)plane : [tex][\bar 1 0 1] [/tex]
Direction: [tex]( \bar 1 1 0) [/tex]plane : [ 1 1 0]
Direction : [tex](0 \bar 11 ) [/tex]plane : [0 1 1]
Direction : [tex]( \bar1 0 1) [/tex]plane : [ 1 0 1]
B) Using the standard cubic representations, the slip plane and slip direction of each system is present in attached figure.
C) Shear is y stress would at assis ; suitable 21 be highest in the direction which either x axis and y axis parallel to system (ii), (iii), (v) & (vi) are the suitable ones. Hence, we resolved all parts.
For more information about slip plane, visit :
https://brainly.com/question/31631295
#SPJ4
A family purchases a light sphere to be used out on their patio. The diameter of the sphere is 18 in.
What is the volume of the light sphere?
Use 3.14 for pi.
Enter your answer as a decimal in the box. Round only your final answer to the nearest hundredth.
in³
Answer: The volume of the light sphere is 3052in³
Step-by-step explanation; diameter of sphere= 18in
therefore, the radius of the sphere = diameter/2
R = 18/2 = 9in
now, the volume of the light sphere = 4/3 πr³
Therefore volume = 4/3*3.14*9*9*9
=3052.08 in³ ≈ 3052in³
Suppose the probability distribution for X = number of jobs held during the past year for students at a school is as in the following table.
No. of Jobs, X 0 1 2 3 4
Probability 0.17 0.35 0.25 0.16 0.07
(a) Find P(X 2), the probability that a randomly selected student held two or fewer jobs during the past year.
P(X 2) =
Correct: Your answer is correct.
(b) Find the probability, P that a randomly selected student held either one or two jobs during the past year.
P =
Incorrect: Your answer is incorrect.
(c) Find P(X > 0), the probability that a randomly selected student held at least one job during the past year.
P(X > 0) =
Correct: Your answer is correct.
(d) Fill in the table that lists the cumulative probability distribution function for X.
k 0 1 2 3 4
P(X<=k)
a. P(X ≤ 2) = 0.77
b. P(X = 1 or X = 2) = 0.60
c. P(X > 0) = 0.83
d. The cumulative probability distribution function for X is given in the table.
(a) The probability of a randomly selected student holding two or fewer jobs during the past year is given by the sum of the probabilities of holding 0, 1, or 2 jobs:
P(X ≤ 2) = P(X = 0) + P(X = 1) + P(X = 2) = 0.17 + 0.35 + 0.25 = 0.77
Therefore, P(X ≤ 2) = 0.77.
(b) The probability of a randomly selected student holding either one or two jobs during the past year is given by the sum of the probabilities of holding 1 or 2 jobs:
P(X = 1 or X = 2) = P(X = 1) + P(X = 2) = 0.35 + 0.25 = 0.60
Therefore, P = 0.60.
(c) The probability of a randomly selected student holding at least one job during the past year is the complement of the probability of holding no jobs:
P(X > 0) = 1 - P(X = 0) = 1 - 0.17 = 0.83
Therefore, P(X > 0) = 0.83.
(d) The cumulative probability distribution function for X is the sum of the probabilities up to and including the value k:
P(X ≤ k) = ∑P(X = i) for i = 0 to k
Using the given probabilities, we can fill in the table:
k 0 1 2 3 4
P(X ≤ k) 0.17 0.52 0.77 0.93 1.00
Therefore, the cumulative probability distribution function for X is:
P(X ≤ k) = 0.17 for k = 0
P(X ≤ k) = 0.52 for k = 1
P(X ≤ k) = 0.77 for k = 2
P(X ≤ k) = 0.93 for k = 3
P(X ≤ k) = 1.00 for k = 4
To learn more about probability visit:
https://brainly.com/question/11234923
#SPJ4
Answer in standard form
Answer:Any number that we can write as a decimal number, between 1.0 and 10.0, multiplied by a power of 10, is said to be in standard form. 1.23 × 108; If you observe carefully, 1.23 is a decimal number between 1.0 and 10.0 and so we have the standard form of 123,000,000 as 1.23 × 10 8.
Step-by-step explanation:
P.S i am emo
a parameter of the exponential smoothing model that provides the weight given to the most recent time series value in the calculation of the forecast value is known as the . a. smoothing constant b. mean square error c. error term d. mean absolute deviation
The correct answer is option A, "smoothing constant".
What is statistics?
Statistics is a branch of mathematics that deals with the collection, analysis, interpretation, presentation, and organization of numerical data.
Exponential smoothing is a widely used forecasting technique that involves giving different weights to the past observations in a time series, with the most recent observation being given the highest weight. The parameter that determines the weight given to the most recent observation is known as the "smoothing constant".
The smoothing constant is a value between 0 and 1, and it represents the rate at which the influence of past observations on the forecast decreases over time. A larger value for the smoothing constant gives more weight to recent observations, while a smaller value gives more weight to older observations.
The parameter of the exponential smoothing model that provides the weight given to the most recent time series value in the calculation of the forecast value is known as the "smoothing constant".
Therefore, the correct answer is option A, "smoothing constant".
To learn more about statistics from the given link:
https://brainly.com/question/28053564
#SPJ1
