Answer:
In this problem the correct thing would be to use the ideal gas equation.
Explanation:
Well in this exercise we will use the following equation:
(P x V) / T = (p x v) / t
On the right side of the equation we will find the initial values, that is, the values with which the reaction begins and in general they are always the first to write in the problems.
Instead on the left side of the equation, the letters that are in lowercase are the final values, that is to say at the end of the reaction that the values of pressure, temperature and volume are reached.
P is pressing, just like p, T and t are temperature, and V and v are volume.
We use this equation so we consider the behavior of said gas to be an IDEAL gas, a constant volume.
That is why the given pressures require an atmosphere to pass, which is another unit used to press the pressure ... Much needed in this equation! An atmosphere is equivalent to 760 millimeters of mercury ...
Then the final and initial pressures would be:
initial pressure: 1.15 atm
final pressure: 1.38 atm
In this way you already have the values to be able to solve in the equation your unknown that would be the final temperature:
Considering that the volume is constant, we cancel it from the equation, 1.15 atm would be in the value of P and 1.38 in the value of p ... In this way it considers that 20 degrees Celsius is the initial temperature or ses T, we would only have to clear the t.
Which table represents a relation that is not function?
Please
Answer:
1
Explanation:
Any relation with a repeated input value is not a function.
Table 1 has the input value 2 listed twice, so does not represent a function.
If you prepare a solution by adding sufficient amount of solute so that after heating and cooling the solution there is a visible amount of solid solute left in the bottom of the beaker, the solution would be considered ________.
Answer:
saturated
Explanation:
Identify whether each species functions as a Brønsted-Lowry acid or a Brønsted-Lowry base in this net ionic equation. HF (aq) + SO32- ⇌ F- + HSO3- Brønsted-Lowry _____ Brønsted-Lowry _____ Brønsted-Lowry _____ Brønsted-Lowry _____ In this reaction: The formula for the conjugate _____ of HF is The formula for the conjugate _____ of SO32- is
Explanation:
A Bronsted-Lowry base is a substance that accepts a proton in the form of a hydrogen (H) atom.
On the other hand;
Bronsted-Lowry acid is the substance that donates the proton.
HF (aq) + SO32- ⇌ F- + HSO3-
In the forward reaction;
Bronsted-Lowry acid : HF
Bronsted-Lowry base: SO32-
In the backward reaction;
Bronsted-Lowry acid : HSO3-
Bronsted-Lowry base: F-
The conjugate base of HF is F-
The conjugate acid of SO32- is HSO3-
Coral reefs support more species per unit area than any other marine
environment on Earth. What role do coral reefs play in the health of the
biosphere?
A. Coral reefs tend to drain nearby wetlands of stagnant water.
B. Their productive organisms play a major role in nutrient recycling.
C. Their colorful organisms attract millions of tourists each year.
D. Coral reefs require very specific environmental conditions.
SUBMIT
Answer:
B. Their productive organisms play a major role in nutrient recycling.
Explanation:
Coral reefs contain photosynthetic algae that help coral reefs in processing nutrients and contribute in the nutrient cycle.
The process of photosynthesis in corals leads to carbon fixing in which corals transform, carbon dioxide, into organic carbon. carbon fixing property allows corals to become primary producers.
Dissolve organic matter produced by corals is consumed by several organisms such as crabs, worms, fish, and snails.
Hence, coral reefs maintain the flow of energy and nutrient cycle in the biosphere and the correct option is B.
1 Ammonia, NH3, reacts with incredibly strong bases to produce the amide ion, NH2 -. Ammonia can also react with acids to produce the ammonium ion, NH4 +. (a) Which species (amide ion, ammonia, or ammonium ion) has the largest H ¬ N ¬ H bond angle? (b) Which species has the smallest H¬N¬H bond angle?
Answer:
a) ammonium ion
b) amide ion
Explanation:
The order of decreasing bond angles of the three nitrogen species; ammonium ion, ammonia and amide ion is NH4+ >NH3> NH2-. Next we need to rationalize this order of decreasing bond angles from the valence shell electron pair repulsion (VSEPR) theory perspective.
First we must realize that all three nitrogen species contain a central sp3 hybridized carbon atom. This means that a tetrahedral geometry is ideally expected. Recall that the presence of lone pairs distorts molecular structures from the expected geometry based on VSEPR theory.
The amide ion contains two lone pairs of electrons. Remember that the presence of lone pairs causes greater repulsion than bond pairs on the outermost shell of the central atom. Hence, the amide ion has the least H-N-H bond angle of about 105°.
The ammonia molecule contains one lone pair, the repulsion caused by one lone pair is definitely bless than that caused by two lone pairs of electrons hence the bond angle of the H-N-H bond in ammonia is 107°.
The ammonium ion contains four bond pairs and no lone pair of electrons on the outermost nitrogen atom. Hence we expect a perfect tetrahedron with bond angle of 109°.
In this problem, you will use Lenz's law to explore what happens when an electromagnet is activated a short distance from a wire loop.
You will need to use the right-hand rule to find the direction of the induced current. When the switch is open, which of the following statements about the magnetic flux through the wire loop is true? Assume that the direction of the vector area of the wire loop is to the right.
A) There is no magnetic flux through the wire loop.
B) There is a positive flux through the wire loop.
C) There is a negative flux through the wire loop.
Answer:
The correct answer is Option A (There is no magnetic flux through the wire loop.)
Explanation:
Magnetic flux measures the entire magnetic field that passes through the wire loop.
The right hand rule can be demonstrated on how magnetic flux is generated through the moving current in the wire loop. The magnetic flux through the wire loop will decrease as it moves upward through the magnetic field region.
If the direction of the vector area of the wire loop is to the right, and the switch is closed, it will push the magnetic flux to the right which will now be increased due to an equal increase in the current in the wire loop. But, when the switch is open, this will halt the movement of current through the wire loop thus affecting the generation of magnetic field. This would make the magnetic flux to be zero.
The statement related to the magnetic flux is option A i.e. no magnetic flux is there.
What is magnetic flux?It determined the overall magnetic field that should be passed via the looping of the wire. here the right-hand rule represent how the magnetic flux should be created via the movement of the current.
Also, it should be decreased in the case when it should be moved upward. Also, in the case when the direction of the vector area should be right so the switch should be closed.
Therefore, the option A is correct.
Learn more about magnetic here: https://brainly.com/question/18704022
There are __________ moles of N atoms present in a 2.0 g C8H10O2N4.
Answer:
[tex]n_N=0.041molN[/tex]
Explanation:
Hello,
In this case, for this mole-mass relationship, we are able to compute the moles of nitrogen atoms by firstly obtaining the moles of the given compound, considering its molar mass that is 194 g/mol:
[tex]n_{C_8H_{10}O_2N_4}=2.0gC_8H_{10}O_2N_4*\frac{1molC_8H_{10}O_2N_4}{194gC_8H_{10}O_2N_4} =0.01molC_8H_{10}O_2N_4[/tex]
Then, by knowing that one mole of the given compound has four moles of nitrogen atoms, we apply the following relationship:
[tex]n_N=0.01molC_8H_{10}O_2N_4*\frac{4molN}{1molC_8H_{10}O_2N_4} \\\\n_N=0.041molN[/tex]
Best regards.
Best example of potential energy?
Answer:
water stored in a dam
Explanation:
when the water is in dam it is ready to move bit is not moving
What is the systematic name of the following compound?
Mn3(PO4)2
The polyatomic ion phosphate has the formula PO
Answer:
Manganese(II) phosphate | Mn3(PO4)2 - PubChem
Answer:
Magnese(ll) posphate M23 (p042) Molecular weight.
That is what the leters stand for!
IF THIS HELPED AND IF YOU DON'T MIND CAN YOU PLEASE MARK ME BRAINLIEST?which element causes burning when me mix it with oxygen
Answer:
Hydrogen peroxide is ans
what is the chemical symbol and name of the third element in the periodic table
Answer: Aluminum symbol Al or aluminum American English
Explanation:
Answer:
Hii
Li( Lithium)
Explanation:
Lithium has the atomic number of three and is the third element in periodic table.
What is the atomic mass of AlNO2?
Answer:
I am not sure, but I think this is the answer 72.987 g/mol
How many significant figures are in 382.90?
Answer:
5
Explanation:
Answer:
5
Explanation:
symbol for carboxylic acid
A chemist working as a safety inspector finds an unmarked bottle in a lab cabinet. A note on the door of the cabinet says the cabinet is used to store bottles of diethylamine, tetrahydrofuran, chloroform, ethanolamine, and acetone. First, from her collection of Material Safety Data Sheets (MSOS), the chemist finds the following information:
liquid density
diethylamine 1.1 gcm-3
tetrahydrofuran 0.7 9gcm-3
chloroform 0.71 gcm-3
ethanolamine 0.89 gcm-3
acetone 1.6 gcm-3
Next, the chemist measures the volume of the unknown liquid as 0.767 L and the mass of the unknown liquid as 682 g.
1. Calculate the density of the liquid.
2. Given the data above, is it possible to identify the liquid?
3. If it is possible to identify the liquid, do so.
a. dimethyl sulfoxide.
b. acetone.
c. diethylamine.
d. tetrahydrofuran .
e. carbon tetrachloride
Answer:
1. density = 0.89 g/cm3
2. Yes is possible to identify the liquid
3. ethanolamine
Explanation:
Data:
mass = 682 g
volume = 0.767 L = 767 mL or cm3
1.
To calculate the density of the liquid it is necessary to know that the density formula is:
[tex]density=\frac{mass(g)}{volume(cm^{3}) }[/tex]
The data obtained is replaced in the formula:
[tex]density=\frac{682g)}{767(cm^{3}) }=0.89\frac{g}{cm^{3} }[/tex]
2.
With the given data it is possible to identify the liquid, this because the density value is a basic property of each liquid.
3.
It is possible to determine what liquid it is, since when comparing the value obtained with those reported in the collection of Material Safety Data Sheets (MSOS), the value that agrees is that of ethanolamine.
Nitrogen forms more oxides than any other element. The percents by mass of in three different nitrogen oxides are (1) (II) and (III) 25.94 For each compound, determine (a) the simplest whole-number ratio of to and (b) the number of grams of oxygen per 1.00 of nitrogen.
Complete question;
Nitrogen forms more oxides than any other element. The percents by mass of N in three different nitrogen oxides are (|) 46.69%;(II) 36.85 %; (III) 25.94%. For each compound, determine (a) the simplest whole-number ratio of N to O, and (b) the number of grams of oxygen per 1.00 g of nitrogen.
Answer:
a. (i) The ratio is 1:1 , the formula = NO (ii)The ratio is 1 : 1.5 which is 2 : 3, the formula = N₂O₃ (iii) The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅
b. (i)number of grams of oxygen = 53.31/46.69 = 1.14 g
(ii)number of grams of oxygen = 63.15/36.8 = 1.71 g
(iii)number of grams of oxygen = 74.06/25.94 = 2.855 g
Explanation:
a.
(i) The percentage by mass of the nitrogen in Nitrogen oxide (i) is 46.69% which is taken as 46.69 grams . Since the other element is oxygen the mass of oxygen will be 100 - 46.69 = 53.31 grams.
The relative atomic mass of Nitrogen and oxygen is 14 amu and 16 amu respectively.
Therefore, to know the whole number ratio of N and O we find the number of moles.
number of moles of N = 46.69/14 = 3.335
number of moles of O = 53.31/16 = 3.332
The ratio is 1:1 , the formula = NO
(ii)
number of moles of N = 36.85/14 = 2.632
number of moles of O = 63.15/16 = 3.947
The ratio is 1 : 1.5 which is 2 : 3, the formula = N₂O₃
(iii)
number of moles of N = 25.94/14 = 1.85
number of moles of O = 74.06/16 = 4.63
The ratio is 1 : 2.5 which is 2:5 , the formula = N₂O₅
b.
(i) 46.69 g of nitrogen = 53.31 g of oxygen
1 g of nitrogen = ? of Oxygen
number of grams of oxygen = 53.31/46.69 = 1.14 g
(ii)
Using similar method in b(i)
number of grams of oxygen = 63.15/36.8 = 1.71 g
(iii)
Using similar method in b(i)
number of grams of oxygen = 74.06/25.94 = 2.855 g
Which best describes thermal energy? It is the difference between internal energies of two or more substances. It is the sum of internal energies of two or more substances. It is the portion of internal energy that can be transferred from one substance to another. It is the portion of potential energy that can be transferred from one substance to another.
Answer:
It is the portion of internal energy that can be transferred from one substance to another.
Thermal energy is the portion of internal energy that can be transferred from one substance to another.
What is thermal energy?Thermal energy is the energy an object posses which is as a result of particles movement within it.
It is also the internal energy system in a state of thermodynamic equilibrium which is as a result of its temperature. Thermal energy cannot be concert to useful work easily.
Therefore, thermal energy is the portion of internal energy that can be transferred from one substance to another.
Learn more about thermal energy from the link below.
https://brainly.com/question/19666326
During which stage of the water cycle could water enter the atmosphere as a gas? A. transpiration B. precipitation C. accumulation D. condensation
Answer: Transpiration---A
Explanation: Transpiration is the process in the water cycle whereby plant loose(excess) water by evaporation through the stomata of their leaves since not all water absorbed by the root is actually used for growth in plants.In order to allow the intake of carbon-dioxide, water must exit the leaves through transpiration which then provides the plant with cooling, rigidity and maintaining the overall water balance of the plant.
rinking water suggest an upper limit of 250 mg/L for chloride ion. If 1.03×104 liters of water in a storage tank contains 1.40 grams of Cl-, what is the contaminant level in ppm? in ppb? Is this level acceptable based on EPA guidelines?
Answer:
This water has a level acceptable, 0.1359ppm and 135.9ppb.
Explanation:
1.40g of Cl⁻ are:
1.40g Cl⁻ × (1000mg / 1g) = 1400mg Cl⁻
In 1.03x10⁴L:
1400mg / 1.03x10⁴L = 0.1359mg/L.
As the upper limit of Cl⁻ in water is 250mg/L, this water has a level acceptable
ppm are the ratio between mg of solute and liters of solution, that means the tank contains 0.1359mg/L = 0.1359ppm
ppb, parts per billion are 1000 times ppm, thus, parts per billion of the storage tank are:
0.1359ppm × 1000 = 135.9ppb
A sample of helium has a volume of 325 mL and a pressure of 655 mmHg. What will be the pressure, in mmHg, if the sample of helium is compressed to 125 mL (T, n constant)? (Show calculations.)
Answer:
1703 mmHg
Explanation:
Volume and pressure are presumed to be inversely proportional. Hence a change in volume by a factor of 125/325 = 5/13 is expected to change the pressure by a factor of 13/5:
(13/5)(655 mmHg) = 1703 mmHg
¿What are the units that make up the 3 quantities (mass, volume of a substance and density)?
Answer:
Grams , centimeters cubed, and grams per centimeter
Explanation:
Give the IUPAC name for the following compound
Answer:
3–bromo–5–chloro–4–methylhexane.
Explanation:
To name the compound given in the question, the following must be observed:
1. Locate the longest continuous carbon chain. This gives the parent name of the compound. In this case, the longest chain is carbon 6 i.e Hexane.
2. Identify the substituents attached. In this case the substituents attached are:
a. Chloro i.e Cl.
b. Bromo ie Br.
c. Methyl i.e CH3.
3. Give the substituents the lowest possible count alphabetically. Bromo comes before Chloro alphabetically, so we shall consider bromo first. Their positions are given below:
Bromo i.e Br at carbon 3
Chloro i.e Cl is at carbon 5
Methyl i.e CH3 is at carbon 4
4. Combine the above to get the name of the compound.
Therefore, the name of the compound is:
3–bromo–5–chloro–4–methylhexane.
Coefficient of balanced equation: __Fe + ___020) — _Fe_036)
Answer:
- Four for iron, three for oxygen and 2 for iron (III) oxide:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
Explanation:
Hello,
In this case, the oxidation of iron is a widely acknowledged reaction occurring in ships and other machines exposed to the air or highly oxidizing medias. Thus, by the effect of oxygen, iron undergoes oxidation typically to iron (III) oxide:
[tex]Fe+O_2\rightarrow Fe_2O_3[/tex]
Nonetheless, the law of conservation of mass must be respected, therefore the coefficients balancing the reaction are four for iron, three for oxygen and 2 for iron (III) oxide:
[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]
Best regards.
3.01 × 1023 molecules H2O
Answer:
0.5 mole
Explanation:
The question isn't even clear
But I'm guessing you want to ask the number of moles
n= Number of molecules/ Avogadros number
n= 1/2
After recrystallizing an impure sample with isopropanol, you isolate your product by filtration. What solvent do you use to wash your crystals? Room temperature distilled water Room temperature isopropanol Ice cold distilled water Ice cold isopropanol
Answer:
The correct answer is ice cold isopropanol.
Explanation:
Any compound in the initial stage is first dissolved in any suitable solvent and is heated for a certain duration for the process of recrystallization. Afterward, the compound is kept at room temperature so that it gets cooled gradually. In the process, the impurities remain dissolved in the solvent and the pure compound gets separated in the form of a precipitate.
Post all this, the filtration of the pure compound is done and is then washed with the cold solvent, which was initially used to dissolve the compound. Therefore, the appropriate solvent to use in the process is ice-cold isopropanol.
What is the balanced chemical equation for this reaction? H3PO4 + HCl → PCl5 + H2O Question 7 options: H3PO4 + 5HCl → PCl5 + H2O 2H3PO4 + 10HCl → 2PCl5 + 4H2O 2H3PO4 + 5HCl → 2PCl5 + 3H2O H3PO4 + 5HCl → PCl5 + 4H2O
Answer:
H3PO4 + 5HCl → PCl5 + 4H2O
Explanation:
In a chemical reaction, the number of atoms of each element must be the same on both sides of the equation. Notice that, originally, there's only one atom of chlorine on the left side and five atoms of chlorine on the right. The coefficient of 5 is added to the HCl compound to correct this. However, now there are eight atoms of hydrogen on the left and only two on the right. Adding the coefficient of 4 to the H2O compound balances the hydrogen and also balances oxygen on both sides at the same time.
The balanced chemical equation for the reaction:
H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)
How to write balance equation?To write the balance equation for any given reaction, all we need to do is to ensure that the number of atoms in the reacting species and products formed are equal on both sides of the equation.
The balanced chemical equation for the reaction given in the question can be obtained as follow:
H₃PO₄ + HCl → PCl₅ + H₂O
There are 5 atoms of Cl on the right side and 1 atom on the left. It can be balanced by writing 5 before HCl as shown below:
H₃PO₄ + 5HCl → PCl₅ + H₂O
There are a total of 8 atoms of H on the left side and 2 atoms on the right. It can be balanced by writing 4 before H₂O as shown below:
H₃PO₄ + 5HCl → PCl₅ + 4H₂O
Now, we can see that the number of atoms in the reactants and products are equal.
Thus, the balanced equation for the reaction is
H₃PO₄ + 5HCl → PCl₅ + 4H₂O (last option)
Learn more about balancing equation:
https://brainly.com/question/12192253
#SPJ6
if 196L of air at 1 atm is compressed to 2600mL,what is the new temperature?
Answer:
Around 3.62 degrees kelvin
Explanation:
Assuming this is at STP:
The first step is to convert 2600mL to liters. There are 1000 milliliters in a liter, meaning that this is equal to 2.6L.
Now:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\\\\\dfrac{196(1)}{273}=\dfrac{2.6(1)}{T_2} \\\\\\T_2\approx 3.62K[/tex]
Hope this helps!
When a saturated solution of NH4Br dissolved in 100 grams of water is cooled from 60°C to 30°C, how much NH4Br will precipitate?
Answer:
[tex]m_{precipitated}=24.8g[/tex]
Explanation:
Hello,
In this case, since at 60 °C, 108 grams of ammonium bromide are completely dissolved in 100 grams of water for a saturated solution, once it is cooled to 30 °C, wherein only 83.2 grams are completely dissolved in 100 grams of water, the following mass will precipitate:
[tex]m_{precipitated}=108g-83.2g\\\\m_{precipitated}=24.8g[/tex]
Best regards.
Which of the following structures in the human body has the highest level of organization
Answer:
The brain
Explanation:
With all those instructions the body recqures to respond to it must be so
Hope it helps
What is it called when a gas changes into a liquid?
Answer:
Explanation:
Condensation is the word you seek.
Answer:
Condensation
Explanation:
When a gas is subjected to decrease in temperature it is condensed
