1. Coulomb's Law
Coulomb's law states that the force of a charged object on another charged object is directly proportional to the product of their charge(s) and inversely proportional to the square of the distance between them.
[tex]F_{elec}=k\frac{|q_1||q2|}{r^2}[/tex]
k is a constant.
2. The Force Would Decrease.
Coulomb's law predicts the electric force between two charged objects in a medium.
[tex]F=\frac{1}{4\pi\in_0 } \frac{|q_1q_2|}{r^2}[/tex]
where K is the medium's dielectric constant.
Vacuum: [tex]k=1[/tex]
Plastic: [tex]k > 1[/tex]
Therefore, the force between the two balls will decrease when the plastic sheet is inserted.
3. The Junction Rule states that the sum of magnitudes of the currents directed into a junction equals the sum of the magnitudes of the currents directed out of the current.
4. A Toroid is a doughnut shaped object whose surface is a torus. It annular shape is generated by revolving a circle around an axis external to the circle. Some example uses are RF chokes which is an inductor to have a high impedance to RF current and low impedance to DC current. Another use is variable-frequency oscillator (VFO). The frequency is set by a tuned circuit using capacitors and inductors. The frequency can be changed by adjusting the components in the tuned circuit. Just one last example is in mixers. These are used in transformers for Diode Ring Mixers. Which result in being ready, built, and homebrew.
Answer:
According to Coulomb's law, the force of attraction or repulsion between two charged bodies is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. It acts along the line joining the two charges considered to be point charges.Force will decrease. The force between charged balls will decrease.Kirchhoff's Junction RuleIt is an application of the principle of conservation of electric charge. The law states that at any circuit junction, the sum of the currents flowing into and out of that junction are equal.In mathematics, a toroid is a surface of revolution with a hole in the middle. The axis of revolution passes through the hole and so does not intersect the surface. For example, when a rectangle is rotated around an axis parallel to one of its edges, then a hollow rectangle-section ring is produced.Gerry is looking at salt under a powerful microscope and notices a crystalline structure. What can be known about the salt sample that Gerry is looking at?
The atoms have spread out from each other.
The atoms are sliding past each other.
The atoms have no particular pattern.
The atoms are vibrating in place.
i know it is c
here is the answer
I finished all my other questions but i don't know how to do this one. could someone help me? I added a lot of points because I know this is pretty complicated.
Explanation:
hope it will help you understand, if you have any questions just let me know.
one of the rare galaxies that is isolated in space is likely to be a(n) ____.
The rarest type of galaxies is the elliptical double-ringed galaxy.
What is the rarest type of galaxy?elliptical double-ringed galaxy is considered as the rarest type of galaxy because of its small number. The example of such type of galaxy is PGC 1000714. Scientists suggest that about 0.1% of galaxies are of this type.
So we can conclude that the rarest type of galaxies is the elliptical double-ringed galaxy.
Learn more about galaxy here: https://brainly.com/question/13956361
#SPJ11
Who is responsible of refraction light 1/3 in eye
The cornea is responsible of refraction light 1/3 in eye.
What is the function of the cornea?In addition to the protective function, it plays a fundamental role in the formation of vision. Transparent, it works like a lens over the iris, focusing light from the pupil towards the retina.
Normally, the cornea and lens deflect (refract) incoming light rays, focusing them on the retina. The shape of the cornea is fixed, but the lens changes shape to focus on objects at different distances from the eye.
See more about cornea at brainly.com/question/2297282
#SPJ12
What is the final temperature of 0.1 kg of water initially at 22 *C after 10 kj of heat is added
The final temperature of the given mass of water at the initial temperature is 45.8 ⁰C.
Change in temperature of the waterThe change in temperature of the water is calculated as follows;
Q = mcΔθ
Δθ = Q/mc
where;
c is specific heat capacity = 4200 J/kgCΔθ = (10,000)/(0.1 x 4200)
Δθ = 23.8
Final temperatureT2 - T1 = 23.8
T2 = 23.8 + 22
T2 = 45.8 ⁰C
Learn more about temperature here: https://brainly.com/question/25677592
#SPJ1
Which of the following is an example of an electromagnetic wave?
Sound
Ocean waves
Seismic waves
Red light
Answer:
red light light is an electromagnetic wave thats whyy
hope it helped
Explanation:
A 1.0-g string that is 0.64 m long is fixed at both ends and is under tension. This string produces a 100-Hz tone when it vibrates in the third harmonic. The speed of sound in air is 344 m/s. The tension in the string is closest to
The tension in the given string of 1.0 g and length of 0.64 m is closest to 2.84 N
Tension in the string
The tension in the string at nth harmonic is calculated as follows;
[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }[/tex]
where;
n th harmonic = 3L is length of the string = 0.64 mμ is mass per unit length = (1 x 10⁻³ kg)/(0.64 m) = 0.00156 kg/mf is frequency = 100 HzT is tension in the string = ?[tex]f_n = \frac{n}{2l} \sqrt{\frac{T}{\mu} }\\\\\frac{f_n(2l)}{n} = \sqrt{\frac{T}{\mu} }\\\\\frac{f_n^2(4l^2)}{n^2} = \frac{T}{\mu} \\\\T = \mu (\frac{f_n^2(4l^2)}{n^2})\\\\T = 0.00156(\frac{100^2 \times 4\times 0.64^2}{3^2} )\\\\T = 2.84 \ N[/tex]
Learn more about tension in string here: https://brainly.com/question/24994188
#SPJ1
which of the following would increase
Answer:
1 and 3
Explanation:
1 and 3
Increasing coils increases strength
COOLING the wire would increase current flow and strength of magnet
Adding an iron core will definitely increase the strength of the electromagnet
(1) Increasing the number of coils (✔)
a 5200w electric oven
Answer:
104 kWh
Explanation:
To calculate the kWh you multiply power with the amount of hours.
So for this we take 5200 W × 20 = 104 000 Wh
Then change Wh to kWh so that makes 104 kWh
VR is always greater than MA. why?
Answer:
The mechanical advantage (M.A) of a real machine is always less than its velocity ratio(V.R) because mechanical advantage decreases due to the friction and weight of moving parts of the machine whereas the velocity ratio remains constant.
What is the main difference between a longitudinal wave and a transverse wave? a longitudinal wave always travels faster than a transverse wave. a longitudinal wave does not need a medium to travel through. a transverse wave is made of particles that move perpendicular to the motion of the wave. a transverse wave always carries more energy so that it can travel through empty space.
In a longitudinal wave, the propagation of energy is in the direction of the motion, while in a transverse wave the propagation of energy is perpendicular to the direction of motion.
What is longitudinal wave and Transverse wave?Longitudinal wave is a wave which moves in the direction from where it was started. It has a compression (increased intensity) of the medium particles and a rarefaction ( reduced intensity).
Transverse wave is wave that travels perpendicular or at right angles to the direction from where it was started.
The main differences between longitudinal wave and Transverse wave are:
Transverse wave, the medium moves vertically up and down while in the longitudinal wave, the medium moves left to right.Transverse wave has a crest and a trough while the longitudinal waves have a compression and rarefaction.Transverse waves don't have a pressure variation , longitudinal waves have a pressure variation.Transverse waves can only be propagated in solids and on the surfaces of liquids, Longitudinal waves can be propagated in solids, liquids and gases.Transverse waves don't change in density throughout the medium, longitudinal waves have a change in density throughout the medium.Therefore,
The propagation of energy is in the direction of the motion, while in a transverse wave the propagation of energy is perpendicular to the direction of motion.
Learn more about longitudinal wave and Transverse wave here:
https://brainly.com/question/3513157
#SPJ1
a ball is thrown upward from the ground with an initial velocity of 50m/s. what is the total time spent by the ball in the air (g=10m/s2)
Answer:
[tex]\fbox {5 seconds}[/tex]
Explanation:
The formula which is used here :
[tex]\fbox {v = u + at}[/tex]
[tex]\longrightarrow \textsf {v : final velocity}[/tex]
[tex]\longrightarrow \textsf {u : initial velocity}[/tex]
[tex]\longrightarrow \textsf {a : acceleration}[/tex]
[tex]\longrightarrow \textsf {t : time taken}[/tex]
Solving :
v = u + at
0 = 50 + (-10)t
10t = 50
t = 5 seconds
A 1-kg block starts sliding up a 30o inclined plane with an initial velocity of 4.00 m/s. How far will the block travel before coming to rest, if the surface is rough and the coefficient of kinetic friction between the block and the ramp is 0.2.
The block will travel 2.038 m before stopping. Newton's third equation of motion is applied in the given problem.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).
it is defined as the product of the coefficient of friction and normal reaction.
On resolving the given force and acceleration. Mathematically in the different components and balancing the equation gets.Components in the x-direction.
From Newton's third equation of motion;
v²=u²+2as
0 =u²+2(-a)s
u²=2as
u²=2×(2×μg)s
4.00 m/sec = √2×(2 ×0.2 ×9.81 s
16 = 7.848 s
s = 2.038 m
Hence, the block will travel 2.038 m before stopping.
To learn more about the friction force refer to the link;
https://brainly.com/question/1714663
#SPJ1
A velocity-time graph can give you
A. Displacement of the moving object
B. Acceleration, displacement, and velocity.
C. Velocity of the moving object
D. Acceleration of the moving object
Answer:
A). Velocity time graph gives displacement..The area under V-t graph gives displacement.
More to know -
Velocity = speed/ time
it's speed with direction.
acceleration = rate of change of velocity
A velocity-time graph provides information about the motion of an object over time Acceleration, displacement, and velocity. The correct option is option (B).
Acceleration: The slope of the velocity-time graph represents the object's acceleration. A positive slope indicates positive acceleration (speeding up), a negative slope indicates negative acceleration (slowing down or decelerating), and a flat line indicates zero acceleration (constant velocity).
Displacement: The area under the velocity-time graph represents the displacement of the object. By calculating the area between the graph and the time axis, we can determine the total displacement.
Velocity: The graph directly shows the object's velocity at different points in time. The vertical position of the graph at any given time represents the object's instantaneous velocity.
Therefore, a velocity-time graph can provide information about the acceleration, displacement, and velocity of the moving object. The correct option is option (B).
To know more about the velocity time graph:
https://brainly.com/question/33512397
#SPJ5
A car initially traveling at 15.0 m/s accelerates at a constant rate of 4.50 m/s2 over a distance of 45.0 m. How long does it take the car to cover this distance? Show all work leading to the answer including the data, equation, substitution and the final answer with units for full credit.
Answer:
2.24 seconds
Explanation:
xf = xo + vo t + 1/2 at^2
45 = 0 + 15 t + 1/2 (4.5) t^2
2.25 t^2 + 15t - 45 = 0 Quadratic formula shows t = 2.24 seconds
The car takes approximately 2.25 seconds to cover a distance of 45.0 meters under the given conditions of constant acceleration.
Given data:
Initial velocity (u) = 15.0 m/s
Acceleration (a) = 4.50 m/s²
Distance (s) = 45.0 m
We can use the kinematic equation to solve for time (t) when the car covers a certain distance under constant acceleration:
S = ut + 1/2at²
Where:
s = distance
u = initial velocity
a = acceleration
t = time
Plugging in the given values:
45.0 = 15.0t + 1/2 m/s²t²
2.25t² +15t - 45 = 0
t = 2.25sec and -8.92sec
Since time cannot be negative in this context, we discard the negative solution.
To know more about distance
https://brainly.com/question/27914071
#SPJ3
When you see a quantity like 20 m/s N, how do you know that it's a vector quantity and not a scalar quantity?
We know that 20 m/s N is a vector quantity because N in the expression signifies the direction
What is a vector quantity?This is a which have both magnitude and direction. Example include:
VelocityDisplacementForceAccelerationMomentWeightHow to determine whether 20 m/s N is a vector quantity20 m/s indicates just the speed i.e magnitude20 m/s N indicates the speed i.e magnitude why the N indicates the direction.Thus, we can conclude that 20 m/s N is a vector quantity because it has both magnitude and direction.
Learn more about scalar and vector quantity:
brainly.com/question/774036
#SPJ12
Where will the strongest force be excerted by the scissor blades to cut through a piece of material? Explain your answer.
Answer:
in the thick part of the scissors ✂️
Explanation:
because in physics simple machine called wedge the force applied in this thick area it have thine side used to split or piece objects
One exciting fairground ride acts like a giant catapult. The capsule which the ‘rider’ is strapped in is fired high into the sky by rubber straps. Explain the energy changes taking place on the ride.
Answer:
- elastic energy of rubber straps → KE of capsule
- KE → GPE as capsule
Explanation:
Cancer and diabetes are two common hereditary diseases.
It is a true statement that cancer and diabetes are two common hereditary diseases.
What are hereditary diseases?The term hereditary diseases are those diseases that occur in parents and could also be found in their offspring. For many of these hereditary diseases, the mechanism of inheritance is unclear.
However, it is a true statement that cancer and diabetes are two common hereditary diseases.
Missing parts:
Cancer and diabetes are two common hereditary diseases. A. True B. False.
Learn more about hereditary diseases:https://brainly.com/question/9367480?r
#SPJ1
When two or more capacitors are connected in series across a potential difference.
Explanation:
1. the potential difference across the combination is the algebraic sum of yhe potential differences across the individual capacitors
2. the equivent capacitance of the combination is less than the capacitance of any of the capacitors..
draw suitable diagrams where necessary
1. describe an experiment for the measurement of specific heat capacity of a liquid by principle of mixtures
The experiment is described below in the explanation.
What is specific heat?The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.
Heat lost or gained is represented as
Q = m C ΔT
In a calorimeter, a liquid is filled into the the cup with a temperature. A rod with high temperature is inserted into that liquid.
We use principle of mixture by putting a heated rod in a liquid and then measuring the rise of temperature of liquid.
So, heat is lost by rod and gained by liquid and colorimeter.
Thus, experiment is described.
Learn more about specific heat.
https://brainly.com/question/11297584
#SPJ1
what is the magnification of a mirror that
Answer:
1.1111111
Explanation:
The formula for magnification (M) as already given is:
M= V/U
Where V is anything that has to do with image . such as image height or image distance And U is anything that has to do with object such as object height or object distance .
Image height (V) = 2m
Object height(U) = 1.8m
M = V/U
M= 2/1.8
M= 1.111111
When the humerus moves in the glenoid fossa, the moving joint surfaces are:
When the humerus moves in the glenoid fossa, the moving joint surfaces are convex on concave.
What is Glenoid fossa?This is a bone depression in which the head of the humerus fits into to aid movement and support.
The moving joint surfaces are convex on concave in structure when humerus moves in the glenoid fossa.
Read more about Humerus here https://brainly.com/question/7194643
#SPJ12
compared to other spiral galaxies, the milky way is ____.
The Milky Way, a member of the "Local Group," is different than other galaxies in the universe. First, it is brighter than most galaxies that we have been able to see. Second, the Milky Way is a barred spiral galaxy; unlike typical spiral galaxies, barred spiral galaxies have flat discs in their centers.
Answer:
The Milky Way Galaxy, is a spiral galaxy, meaning that there are multiple arms spiraling in toward the middle of the galaxy. Are there any other galaxies in the universe shaped like the Milky Way Galaxy?
two point charges of magnitude 4.0 μc and -4.0 μc are situated along the x-axis at x1 = 2.0 m and x2 = -2.0 m, respectively. what is the electric potential at the origin of the xy-coordinate system?
The electric potential at the origin of the xy coordinate system is negative infinity
What is the electric field due to the 4.0 μC charge?The electric field due to the 4.0 μC charge is E = kq/r² where
k = electric constant = 9.0 × 10 Nm²/C², q = 4.0 μC = 4.0 × 10 C and r = distance of charge from origin = x₁ - 0 = 2.0 m - 0 m = 2.0 mWhat is the electric field due to the -4.0 μC charge?The electric field due to the -4.0 μC charge is E = kq'/r² where
k = electric constant = 9.0 × 10 Nm²/C², q' = -4.0 μC = -4.0 × 10 C and r = distance of charge from origin = 0 - x₂ = 0 - (-2.0 m) = 0 m + 2.0 m = 2.0 mSince both electric fields are equal in magnitude and directed along the negative x-axis, the net electric field at the origin is
E" = E + E'
= -2E
= -2kq/r²
What is the electric potential at the origin?So, the electric potential at the origin is V = -∫₂⁰E".dr
= -∫₂⁰-2kq/r².dr
Since E and dr = dx are parallel and r = x, we have
= -∫₂⁰-2kqdxcos0/x²
= 2kq∫₂⁰dx/x²
= 2kq[-1/x]₂⁰
= -2kq[1/x]₂⁰
= -2kq[1/0 - 1/2]
= -2kq[∞ - 1/2]
= -2kq[∞]
= -∞
So, the electric potential at the origin of the xy coordinate system is negative infinity
Learn more about electric potential here:
https://brainly.com/question/26978411
#SPJ11
HELP PLEASE!!! In the diagram, q1 = -6.39*10^-9 C and q2 = +3.22*10^-9 C. What is the electric field at point P? Include a + or - sign to indicate the direction. 91 92 P 0.150 m ** 0.250 m (Hint: The distance from q1 to P is NOT 0.150 m.) (Remember, E points away from + charges, and toward charges.) (Unit = N/C) HELP PLEASE!!
Answer:
E = K Q / R^2
E1 = K Q1 / R1^2 = K * (-6.39 E-9) / .4^2 = -K 39.9 E-9
E2 = K Q2 / R2^2 = K * 3.22 E-9 / .25^2 = K 51.5 E-9
Field will point to right of P since E2 (positive) stronger
E = K (E2 - E1) = 9.0 E9 * (51.5 - 39.9) E-9 = 104 N/C
The electric field at point P is 104.6 N/C.
What is meant by electric field ?Every place in space where a charge exists in any form has an electric attribute that can be defined as the electric field.
Here,
q₁ = -6.39 x 10⁻⁹C
q₂ = 3.22 x 10⁻⁹C
Distance from q₁ to P, d₁ = 0.4 m
Distance from q₂ to P, d₂ = 0.25 m
Electric field at P due to q₁, E₁ = k x -6.39 x 10⁻⁹/(0.4)²
E₁ = -39.9 x 10⁻⁹k N/C
Electric field at P due to q₂, E₂ = k x 3.22 x 10⁻⁹/(0.25)²
E₂ =51.52 x 10⁻⁹k N/C
Therefore, total electric field at P,
E = E₂ - E₁
E = (51.52 - 39.9) x 10⁻⁹k
E = 104.6 N/C
Hence,
The electric field at point P is 104.6 N/C.
To learn more about electric field, click:
https://brainly.com/question/8971780
#SPJ5
Which relationship gives the value of r when r3 is adjusted so that the voltmeter reading is zero?.
Ohm's Law is a formula used to calculate the relationship between voltage, current and resistance in an electrical circuit.
Equation :
To students of electronics, Ohm's Law (E = IR) is as fundamentally important as Einstein's Relativity equation (E = mc²) is to physicists.
E = I x R
When spelled out, it means voltage = current x resistance, or volts = amps x ohms, or V = A x Ω.
NOTE : Because resistance cannot be measured in an active circuit, Ohm's Law is particularly helpful when determining resistance. The aforementioned application of Ohm's Law allows a technician to calculate R without having to turn the circuit off to measure resistance.
To learn more about ohm law refer : https://brainly.com/question/14296509
#SPJ4
hello i need help with this!!
Answer:
Yes
Explanation:
If lamp A burnt out there would still be a wire above it that connects lamp B and C to the power source
which degree is best for science student?
Answer:
Computer Science or Science technology
Explanation:
It all depends on what aspect of science you're looking into such as biology, zoology, marine biology, etc. But since this world is evolving more and more around technology, your best bet is to get into something computer science or science technology.
Which action can humans take to reduce wave erosion?
build drainage systems
build houses near coastlines
build breakwaters in the ocean
reduce vegetation along coastlines
The action that humans can take to reduce wave erosion is to build breakwaters in the ocean.
What is erosion?The term erosion has to do with the washing away of top soil either by water or by wind. The control of erosion is a very important soil conservation effort.
Hence, the action that humans can take to reduce wave erosion is to build breakwaters in the ocean.
Learn more about erosion:https://brainly.com/question/3852201?
#SPJ1
Answer: (C) build breakwaters in the ocean
Explanation: Got it on edge
